FCC ID: 2AVRJSTABIL2 Electronic tag

VILOC STABIL2 / B2B MANUAL English language version 1.0.1 Please consult the latest version of this manual online. It can be downloaded from our github manuals repository accessible through the following URL:

https://github.com/VilocNV/manuals Please contact Viloc if you need authorisation to access this webpage. MODULE Each STABIL2 module consists of :

o o o o PCBA with shielded radio frontends SMT antenna

[3V primary lithium battery]

[Plastic Casing + PU potting material]

All components are soldered together and non-replaceable once assembled as end-product. STOCK MODE & INSTALLATION The Viloc tag is delivered in a battery saving stock mode. Once installed, the tag can be identified and activated using Vilocs Activation app, available for every recent BLE enabled Android and iOS phone. On activation, the information of the tag is displayed in the app, including any available certification labels (e.g. E-label for FCC ID). The Activation app does not require a network connection and synchronizes if one is available. PRODUCT SPECIFICATION Technical specification Storage temperature: -20 to +40 Celsius. Recommended operating temperature -20 to +60 Celsius. Dimensions e.g. ST2-1200-A01: 50 x 33 x 18 mm Weight: e.g. ST2-1200-A01= 35 grams (incl. battery+casing) Battery Specification:

Non-rechargeable Lithium Polymer battery. Battery is non-toxic and non-

hazardous. To prevent damage to the battery the tag should not be exposed for longer than 48 hours to temperatures higher than +60 Celsius. How to dispose of a Viloc Tag Never Remove a Viloc tag from a device by using external pressure on the tag itself. For example, by removing the Viloc tag with a drill, there is a risk of rupture of the battery inside. The module is to be removed by first carefully removing/unlocking any adhesive or mechanical connections with the asset following the proper procedures. Once removed from the asset, the Viloc tag may not be further damaged. Waste disposal: batteries should be reused responsible manner. Therefore, do not dispose of Viloc tags or batteries with other general waste. in an environmentally its FCC regulatory compliance statement This modular transmitter complies with FCC Rules Part 15C. Specific operational use conditions Antenna Change Notice to Host manufacturer We recommend using the supplied antenna which is already soldered to our module and is certified together as one module. If you desire to increase antenna gain and either change antenna type or use same antenna type certified, a Class II permissive change application is required to be filed by us. You (host manufacturer) can also take responsibility through the change in FCC ID (new application) procedure followed by a Class II permissive change application, based on the new emissions testing. In that case, please perform testing on frequency bands where the antenna gain is highest, worst-case band-edges based on original filing, and only on frequency bands where the antenna gain is highest. RF exposure compliance instruction This module is limited to installation in mobile application with a minimum separation distance of at least 20 cm from a persons body, a separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Host product manufacturer shall at least provide information of minimum separation distance to end users in RF exposure compliance statement to end users in their end-product manuals. This module is tested with the following antenna:

Manufacturer: Viloc Type: SMT antenna directly soldered to PCBA Model: combined LoRa+WIFI+BLE antenna SMT antenna LORA WIFI BLE FCC ID: 2AVRJSTABIL2 Manufacturer: Viloc nv, Belgium Product: STABIL2 Labelling and product manufacturer Please notice that if the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following:

Contains FCC ID: 2AVRJSTABIL2 any similar wording that expresses the same meaning may be used. 15.19 Labelling requirements shall be complied on end user device. Labelling rules for special device, please refer to 2.925, 15.19

(a)(5) and relevant KDB publications. For E-label, please refer to 2.935. FCC regulatory Compliance Statement mentioned in this manual shall be properly included in host product manual per FCC Rules. The host product manufacturer shall be aware not to provide information to the end user on how to install or remove this module in your host product manual. Guide on test modes and additional testing requirements Host product manufacturer is ultimately responsible for testing their end-

product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, additional transmitter(s) in the host, etc.). Test software access to different test modes:

Viloc gives the host product manufacturer access to specific software they can program on the module with an over-the-air firmware update from hardware the host manufacturer has available. This contains the full software used for both FCC and CE tests in each mode previously tested. Antenna Gain 0 dbi Not applicable - receiving only at 0 dBi 0 dBi compliance instruction statement host for It is however important to note that because the module has an internal battery only and cannot be powered externally or connected over wires (e.g. UART) once in the end-product. As the battery consumption by the tests is significant it will make the module inside the end-device out-of-spec

(specifically the battery lifetime) once the test is finished. Disclaimer on additional testing, Part 15 Subpart B compliance of Host Product This modular transmitter is only FCC authorized for the specific rule parts is responsible for listed on our grant, host product manufacturer compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. Host manufacturer in any case shall ensure host product which is installed and operating with the module is in compliant with Part 15B requirements. Please note that For a Class B or Class A digital device or peripheral, the instructions furnished the user manual of the end-user product shall include statement set out in 15.105 Information to the user or such similar statement and place it in a prominent location of host product manual. Original texts from FCC Rules are as following you may refer to:

For Class B Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. For Class A Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC regulatory compliance statement for this module 15.19 Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user Warning: changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. RF Exposure compliance statement This module complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

24x26mm VILOC STABIL2 FCC ID: 2AVRJSTABIL2 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. position on PCB module

For those first 5 questions, please answer Yes or No and add description there, please delete this header before inserting your signature Cover Letter for Modular Approval Dear Examiner, We have a module that would like to have your authorization as a modular approval. The specific product as below with its designed features and specified description, meets special requirements for by cross-reference list below. FCC ID:

Product description:

2AVRJSTABIL2 Electronic tag Single Modular Approval, Requirements of FCC KDB996369 Comply (Yes/No) Limited Single Modular Approval on FCC KDB996369 1. The modular transmitter must have its own RF shielding. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. 3. The modular transmitter must have its own power supply regulation. 4. The modular transmitter must comply with the antenna and transmission system requirements of Sections 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a unique antenna coupler (at all connections between the module and the antenna, including the cable). The professional installation provision of Section 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. Yes The module has its own RF shielding. See EUT photo. Yes The EUT has its buffered modulation. Please see the Schematic Diagram. Yes The EUT has its own power supply regulation, please see the Schematic Diagram. Yes The EUT meets the FCC antenna requirements 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. 6. The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. Yes The EUT was tested with a test board, please see test report and setup photo Yes Please see exhibition (digital E-)label sample for the FCC ID of this module. Also, in the exhibition Users manual, there are instructions give to the OEM on how to label the end product. For those first 5 questions, please answer Yes or No and add description there, please delete this header before inserting your signature Yes The EUT is compliant with all applicable FCC rules. Details instructions for maintaining compliance are give in the User Manual. Yes The EUT complies with RF exposure requirement. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 2.1091, 2.1093 and specific Sections of Part 15, including 15.319(i),15.407(f),15.253(f)and15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum Transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with Section 15.247(b)(4). Thank you. Sincerely, Print Name: TIM GESTELS On behalf of Company: Viloc nv Telephone: +32 3 297 19 43 E-mail: tim@viloc.eu Signature:

Signature:

Tim Gestels (Oct 14, 2021 22:49 GMT+2) tim@viloc.eu Email:

Title: DIRECTOR

To:

Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Regarding: Confidentiality Request regarding application for FCC ID: 2AVRJSTABIL2 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby requests confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant (trade secret). SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential for 180 days from the grant date, whichever is less. If the device is marketed within aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: TIM GESTELS Signature:

On behalf of Company: Viloc nv Telephone: +32 3 297 19 43 E-mail: tim@viloc.eu Tim Gestels (Oct 14, 2021 22:49 GMT+2) tim@viloc.eu Title: DIRECTOR Signature:

Email:

a) b) c) d) e) f) g) SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Viloc nv Posthofbrug 6-8 5/106,Antwerp 2600,Belgium Address Grantee Code FCC ID Contact Email Contact Phone Authorized Contact Name Maarten Arits 2AVRJ 2AVRJSTABIL2 maarten@viloc.eu

+32 3 297 19 43 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature:

Print Name:

Title:

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database w TIM GESTELS DIRECTOR Date:2021-07-26 Signature:

Tim Gestels (Oct 14, 2021 22:49 GMT+2) tim@viloc.eu Email:

Applicant Declaration Rev:0.0

TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AVRJSTABIL2 To whom it may concern:

Date: 2021/07/21 We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch and Kobe Jian in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Viloc nv This authorization is valid until further written notice from the applicant. Print Name: TIM GESTELS Title: DIRECTOR Signature:

On behalf of Company: Viloc nv Telephone: +32 3 297 19 43 E-mail: tim@viloc.eu Signature:

Tim Gestels (Oct 14, 2021 22:49 GMT+2) tim@viloc.eu Email:

Title: DIRECTOR We, Viloc nv, declare that this EUT (FCC ID: 2AVRJSTABIL2) is only receiving 2.4G Wifi and NOT transmitting. Should you have any questions or comments regarding this matter, Please have my best attention. Print Name: TIM GESTELS Signature:

On behalf of Company: Viloc nv Telephone: +32 3 297 19 43 E-mail: tim@viloc.eu Tim Gestels (Oct 14, 2021 22:49 GMT+2) tim@viloc.eu Signature:

Email: