FCC ID: Q5P-1712 Wireless Game Controller

REMAPPABLE XBOX SERIES X|S CONTROLLER 1.Instructions:

User Manual Make sure you read this guide before using the wireless controller 1.Turn on the power button located on the console. 2.Turn on your Xbox Series X|S by pressing the Xbox Button on your controller. Joystick Indicator LED D-pad View Xbox Menu X B A A / B / X / Y Share Joystick Program 3.5 mm Headset Jack

) 3.Press the ")))" buttons on both the controller and console,the indicator will fast flash to enter the pairing mode. After connection,the indicator will always be on. Reset M 1/2/3/4 Type-C Xbox Wireless L-Trigger LB R-Trigger RB 2.Specification:

4.It has paired memories , just press the Xbox button to reconnect after the first successful connection. Extended Function! Compatible with Windows 7/8/10 via USB or the Xbox Wireless Adapter sold separately. External Dimensions:155*103.5*64.5 mm Charging Voltage: DC5V/500mA Net Weight: 245g 4.The operation guide to replace the trim cover:

Prise X X B B A A Please Noted! Pry the trim cover from the game controller with your fingers.Do not use other tools to avoid injury to you and damage to the product. 5.Pack Contents:

1 x Wireless Controller 1 x User Manual 2 x Trim Cover 1 x Data Charging Cable 6.CAUTION:

The product is not water proof. Please keep it away from water, high humidity and high temperature environment. DO NOT attempt to modify or disassemble this product. DO NOT slam or hit this product hard, there may be some unnecessary damage for it. Due to violation of above operations,warranty is invalid. 200 mm X 140 mm 3.Operation Guide Of Remappable Buttons:

1. Press and hold Program , then press one of M button you want to program, the indicator will be highlighted to enter setting mode. X B A M 1/2/3/4 2. Take setting A B continuous action mapping in M1 as an example First step: press the A , then press the Program once and the indicator also flashes once accordingly. Second step: press the B , and the press the Program again in the same way. Last step: press the M1 once again and the indicator will dim accordingly. It indicates that the A and B s action has been completely mapped to this M1 . 1 X B A 1 2 X B A 1 2 2

*.All the below buttons can be mapped:

*.Please noted! A single M can map up to 16 steps. 3. Clear the content mapped in the M button:

* Press and hold Program , and press the M button later, the indicator will be highlighted. Then press the M button once again and the indicator will dim accordingly the clearance was completed.

* If you re-map the M button , will record the new content automatically. Noted! The other three M buttons are set up the same as the above steps. And they are each independent and do not interfere with each other. FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

VISION ELECTRONICS CO.,LTD. Agent Authorization Company: VISION ELECTRONICS CO.,LTD. Address: 11F-6, No.400 Huanbei Rd. Jhongli Dist. Taoyuan City, Taiwan Product Name: Wireless Game Controller Model Number(s): 1712, 17131712A171211712217123 1713A171311713217133 Product Description: Wireless Game Controller We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Date: 2022/04/11 Signature:

Name:

Li Fun Lin Title:

Manager Company: VISION ELECTRONICS CO.,LTD.

VISION ELECTRONICS CO.,LTD. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2022/04/12 Subject; Request for Confidentiality FCC ID: Q5P-1712 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram software security requirement Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

User Manual OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued Sincerely, Signature:

Name: Li Fun Lin Title: Manager

VISION ELECTRONICS CO.,LTD. FCC Software Configuration Control Declaration Date: April 12, 2022 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: Wireless Game Controller / 1712, 17131712A17121 17122171231713A171311713217133 Regarding FCC Country Code Selection guidelines identified in KDB 594280 D01 Software Configuration Control v02r01. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Li Fun Lin Title: Manager Date: 2022/04/11 Signatureof applicant FCC Software Configuration Control Declaration Rev1.1

VISION ELECTRONICS CO.,LTD. Model Difference 2022/04/11 EUT NAME: VISION ELECTRONICS CO.,LTD. FCC ID: Q5P-1712 MODEL : 1712, 17131712A1712117122171231713A1713117132 17133 All the model are the same circuit and RF module, except model names. Sincerely Clients signature Clients name / title : Li Fun Lin / manager Contact information / address: 11F-6, No.400 Huanbei Rd. Jhongli Dist. Taoyuan City, Taiwan