FCC ID: 2AA98-MEDIUM5C VW MQBAB2020 Instrument Cluster and Immobilizer System

Visteon Electronics Germany GmbH Visteonstrasse 4-10 D-50170 Kerpen Germany

+49 (0) 721-4766-1900

+49 (0) 721-4766-1263 certger@visteon.com www.visteon.com Installation of MEDIUM 5C and COLOUR 5C Fixing of the Device into the Vehicle:

The MQB Cluster is professionally OEM-installed in the instrument panel of the vehicle behind the steering wheel. Once fixed; all connectivity to other units must be done via the CAN-bus (see Electrical Connections section under the Factory Process). Mounting of the IC IC will be fixed by clipped by 4 mounting clips of the front frame unit into the instrument panel of the vehicle. Additionally the device is fixed by 2 screws to the instrument panel. Use torque wrenches to ensure the correct tightening of all screws. After the mounting of the IC into instrument panel a corresponding vehicle bezel is clipped onto the IC front frame. S. Figure 1. The Factory Process Handling Work with clean gloves (changed on a regular basis). Unpack the IC as close as possible to the production line. Do not stack, hit or scratch in any way the unpacked IC. Do not push or pull on any connectors during the placement and fixing of the device. Instead, push on the sturdy sides or edges of the casing while positioning and fixing the device. Do not scratch, tear or remove the pre-fitted labels. While installing cables, make sure that no cable is pinched or damaged at any point along its length. When fixed, ensure that the heat sink portion of the devices casing is free and not blocked by any obstruction. If any IC is dropped or falls down, it must be scrapped. Electrical Connections Visteon Electronics Germany GmbH Sitz der Gesellschaft / Place of Business: Kerpen Registergericht / Registration Office: Kln, HRB 78269 USt-IDNR. / VAT ID: DE 294 194 802 Steuer Nr. / Tax No: 203/5788/1299 1 Geschftsfhrung / Management Board Jens Tillner Jochen Ladwig Bank: Bank of America Merrill Lynch Konto Nr. / Account No: 20569017 IBAN: DE96 5001 0900 0020 5690 17 SWIFT / BIC code: BOFADEFX Visteon Electronics Germany GmbH Visteonstrasse 4-10 D-50170 Kerpen Germany

+49 (0) 721-4766-1900

+49 (0) 721-4766-1263 certger@visteon.com www.visteon.com Check that the connector of the vehicle are not damaged and that no connector wires are entangled. After connection, ensure that the connector is fully and properly inserted into the corresponding connector socket. Close the connector by its retaining clip. Antenna cables Antenna cable is a part of the cable connected to the IC. The length of the antenna cable varies between 50 cm and 130 cm depending on the vehicle type, antenna type and steering wheel position. The cable is affixed on skeins or metal girders on the surfaces of the vehicles bulkheads, the specific fixing mechanism is dependent on the vehicles model. Connection Recommendations Once laid, cables must not touch any part of the IC casing. Once laid, cables must not hamper thermal dissipation from the IC. All cables must be protected against wear and tear caused by friction with any parts of their surroundings. 2 Visteon Electronics Germany GmbH Sitz der Gesellschaft / Place of Business: Kerpen Registergericht / Registration Office: Kln, HRB 78269 USt-IDNR. / VAT ID: DE 294 194 802 Steuer Nr. / Tax No: 203/5788/1299 Geschftsfhrung / Management Board Jens Tillner Jochen Ladwig Bank: Bank of America Merrill Lynch Konto Nr. / Account No: 20569017 IBAN: DE96 5001 0900 0020 5690 17 SWIFT / BIC code: BOFADEFX Visteon Electronics Germany GmbH Visteonstrasse 4-10 D-50170 Kerpen Germany

+49 (0) 721-4766-1900

+49 (0) 721-4766-1263 certger@visteon.com www.visteon.com Annexes Figure 1: IC Mounting fixtures 3 Visteon Electronics Germany GmbH Sitz der Gesellschaft / Place of Business: Kerpen Registergericht / Registration Office: Kln, HRB 78269 USt-IDNR. / VAT ID: DE 294 194 802 Steuer Nr. / Tax No: 203/5788/1299 Geschftsfhrung / Management Board Jens Tillner Jochen Ladwig Bank: Bank of America Merrill Lynch Konto Nr. / Account No: 20569017 IBAN: DE96 5001 0900 0020 5690 17 SWIFT / BIC code: BOFADEFX

Visteon Electronics Germany GmbH Visteonstrasse 4-10 D-50170 Kerpen Germany

+49 (0) 721-4766-1900

+49 (0) 721-4766-1263 certger@visteon.com www.visteon.com 05 April 2019 Subject: Vehicle Manufacturer Regulatory Text Requirement Statement The following instructions will be supplied to each vehicle manufacturer installing MEDIUM 5C and COLOUR 5C. It is the responsibility of the Vehicle Manufacturer to ensure that the information below is passed on to the end user of MEDIUM 5C and COLOUR 5C to ensure compliance with FCC and ISED Canada certification requirements. Antenna The antenna provided with this device is KOSTAL Air Coil PN: 2Q0.953.254 and HUF Mechanical Lock Coil, NSS (BASIC) + WFS5c, PN: 2G0.905.855

- For FCC Compliance:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate.

- For ISED Canada Compliance:

English RSS-Gen Information for the Certification of Radio Apparatus. This device complies with ISED license-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device. The radio transmitter (IC: 11505-MEDIUM5C and IC: 11505-COLOUR 5C) have been approved by ISED Canada to operate with the antenna type given above, with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Visteon Electronics Germany GmbH Sitz der Gesellschaft / Place of Business: Kerpen Registergericht / Registration Office: Kln, HRB 78269 USt-IDNR. / VAT ID: DE 294 194 802 Steuer Nr. / Tax No: 203/5788/1299 Geschftsfhrung / Management Board Jens Tillner Jochen Ladwig Bank: Bank of America Merrill Lynch Konto Nr. / Account No: 20569017 IBAN: DE96 5001 0900 0020 5690 17 SWIFT / BIC code: BOFADEFX Visteon Electronics Germany GmbH Visteonstrasse 4-10 D-50170 Kerpen Germany

+49 (0) 721-4766-1900

+49 (0) 721-4766-1263 certger@visteon.com www.visteon.com This device complies with the safety requirements for RF exposure in accordance with RSS-102 Issue 5 for portable use conditions with 0mm separation. Franais Cet appareil est conforme au(x) standard(s) RSS exempts de licence dIndustrie Canada. Son exploitation est soumise aux deux conditions suivantes:

(1) cet appareil ne doit pas occasionner dinterfrence et

(2) cet appareil doit supporter toutes les interfrences, y compris celles qui pourraient provoquer un mauvais fonctionnement de cet appareil. Cet metteur radio (IC: 11505-MEDIUM5C and 11505-COLOUR5C) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne spcifi ci-dessus avec le gain dantenne maximal autoris indiqu. Les types d'antennes non inclus dans cette liste ayant un gain suprieur au gain maximal indiqu pour ce type sont strictement interdits pour une utilisation avec cet appareil. Cet appareil est conforme aux exigences de scurit relatives lexposition aux radio frquences conformment la norme RSS-102 Issue 5 pour les conditions dutilisation portable avec une separation de 0mm. Yours faithfully, Dennis Prill Visteon Electronics Germany GmbH Sitz der Gesellschaft / Place of Business: Kerpen Registergericht / Registration Office: Kln, HRB 78269 USt-IDNR. / VAT ID: DE 294 194 802 Steuer Nr. / Tax No: 203/5788/1299 Geschftsfhrung / Management Board Jens Tillner Jochen Ladwig Bank: Bank of America Merrill Lynch Konto Nr. / Account No: 20569017 IBAN: DE96 5001 0900 0020 5690 17 SWIFT / BIC code: BOFADEFX