Infotainment System Infotainment System Type of Equipment: In Vehicle Infotainment Model name: CRONY 2010 Brand Name: Visteon Manufacturer: Visteon Corporation Made In Brazil USER MANUAL Version 1.0 December 6, 2021 2019 Visteon Corporation Infotainment System www.visteon.com
- Do not use the configuration feature or no other function that can divert your attention of the road. During operation
- Do not insert your hands, fingers or strange objects to the unit as this may cause injury or damage to the unit.
- Keep small objects out of reach of the children. To avoid the risk of accidents and the violation of rules, the video feature should never be used while the vehicle is in motion. Infotainment System 1. Safety Requirements This product works with a supply voltage of 13.5V (operating voltage between 9V to 16V). Always check the function of each connector color through the wiring diagram. Do not disassemble or modify the equipment, because this can cause an accident such as fire or electric shock, invalidating your warranty. Do not block the heat exits of the appliance. This may cause overheating or fire. To prevent the risk of electric shock, never expose the unit, amplifier and speakers to cleaning products, moisture or water. In addition, contact with dealer or technical support. Liquids may cause damage, overheating of the unit and risk of fire. While driving, keep the volume at a level where external sounds can be heard. Make sure all speaker wiring is properly installed. Otherwise the unit may be damaged. Respect the local rules, laws and regulations of traffic. While driving
- Do not watch or operate the unit as this may lead to distraction and cause an accident. Park yours car in a safe place to watch or operate the unit. 2019 Visteon Corporation Infotainment System www.visteon.com Infotainment System 2. Warnings To reduce the risk of fire or electric shock, do not expose the device to rain or moisture. To avoid electric shock, do not open the appliance. Search for an Authorized Service. Avoid prolonged use at high volume
(power greater than 65 decibels), because this may impair your audition. Taking your eyes off the road for too long or too often while using any infotainment feature can cause a crash. You or others could be injured or killed. Do not give extended attention to infotainment tasks while driving. Limit your glances at the vehicle displays and focus your attention on driving. Use voice commands whenever possible. Use the proper power supply. This product is designed for operation with a negative grounded 12 V DC battery system. Never operate this product with other battery systems, especially not with a 24 V DC battery system. Do not disassemble or modify the unit, or attempt to repair the product yourself. This may cause serious injury or damage and your warranty will be null and void. If the product needs repair, consult your dealer or contact technical support. If the unit is out of order (no power, no sound) or in an abnormal state (has foreign objects in it, is exposed to water, is smoking, or smells), turn it off immediately and consult your dealer. 2019 Visteon Corporation Infotainment System www.visteon.com Infotainment System Overview respectively. 3.
(Mute Button) Touch to mute/ unmute the volume of display. Display Right Bar:
4. 5. 6.
(Home Button) Touch to return to home screen.
(Radio Button) Touch to go to radio screen.
(Phone Button) Touch to show phone display when phone is connected with system. Touch to go to phone settings screen when phone is not connected with system. Infotainment System CRONY 2010 is an Display Audio Infotainment with a 10.25-inch display that combines state-of-the-art technology, modern design, impeccable finishing and multiple features. The product is all designed to run robust LINUX operating system, bringing more connectivity and interactivity to the user. This infotainment system has two variants, India
(wired only AA/CP projection) and LATAM
(wired+wireless AA/CP projection). Only LATAM variant system support Wi-Fi and GPS fucntionality. This infotainment has no physical buttons, all contact being made through a capacitive screen that allows extremely precise touches. The infotainment system is controlled by using the infotainment display with buttons on left and right bars on the display and steering wheel controls. Display Left Bar:
1.
(Display OFF Button) Touch to turn the display off system. 2.
(Volume Increase and Decrease Buttons) Touch + to increase the volume of system. Touch - to decrease the volume of system. Move slider up or down to increase or decrease volume of system 2019 Visteon Corporation Infotainment System www.visteon.com Infotainment System Note:
Phone Button will be replaced by Android Auto/ Apple CarPlay button when Android/
Apple device is connected with system as projection technology.
(Apple CarPlay Button) and
(Android Auto Button) 7.
(Navigation Button) Touch to show navigation display when Android Auto / Apple CarPlay device is connected with system. Touch to show notification to user when Android Auto / Apple CarPlay device is not connected with system. 2019 Visteon Corporation Infotainment System www.visteon.com Infotainment System 3. Radio AM-FM Radio From the Home Screen, touch the Radio icon to display the audio sources screen. Choose radio icon on Home Screen. AM-FM controls a. Seeking a Station or Press the previous or next strongest station. to search for b. Autostoring Presets Touch the button on the infotainment display to automatically store strongest stations in available presets. c. Frequency Band Touch frequency band button or on the infotainment display to switch to respective band. d. Storing Radio Station Presets Favorites are stored near the bottom of the display. Up to 12 preset stations can be stored for FM band and 6 preset stations can be stored for AM band. or to go to next Touch 6 or previous 6 available presets in FM band. 4. USB and iPod From the Home Screen, touch the Media icon to display the audio sources screen. Choose media icon on Home Screen. USB controls a. USB Port This infotainment system is equipped with one USB port. This port is for data and charging. b. Playing from a USB/iPod To play a USB/iPod device, perform the following steps:
Connect the USB/iPod device. Touch Media on the Home Screen Use the following buttons when playing an active USB/iPod source:
: Touch to play the current media source.
: Touch to pause play of the current media source
: Press to seek to the previous track.
: Press to seek to the next track.
(Shuffle ON) and
(Shuffle OFF) : Touch the Shuffle ON icon on the infotainment display to shuffle 2019 Visteon Corporation Infotainment System www.visteon.com Infotainment System through the available media. Touch to play the tracks randomly. Touch Shuffle OFF icon to stop shuffle. Note: For iPod media, Shuffle functionality depends on the connected iPod device.
(Repeat All) and
(Repeat Folder) and
(Repeat One) : Touch the repeat icon on the infotainment display to repeat through the available media. Touch Repeat All icon to repeat all tracks. Touch Repeat Folder icon to play tracks from current folder. Touch Repeat One icon to repeat the same track. Note: For iPod media, Repeat functionality depends on the connected iPod device. c. Progress bar Songs Genre Video Files The following options appear on the left of the screen for iPod Media:
Folders Artists Albums Songs Genre My Music Podcasts Audio Books Note: Video files playback is not supported from connected iPod devices. Browse categories for iPod Media depends on the connected iPod device. 5. Bluetooth Audio The Bluetooth-capable system can interact with many mobile devices, allowing:
Move the progress bar slider to interact with the currently playing track. d. USB/iPod Browse Menu Placement and receipt of calls in a hands-free mode. Sharing of the devices contact list with the vehicle.
: Touch the browse icon on the infotainment display to go to browsr menu for the available media. The following options appear on the left of the screen for USB Media:
Folders Artists Albums a. Bluetooth (Pairing and Using the Phone) A Bluetooth-enabled mobile device must be paired to the Bluetooth system and then connected so that Bluetooth functions can be used in the infotainment system. b. Pairing Information If no mobile device has been connected, touching 2019 Visteon Corporation Infotainment System www.visteon.com Infotainment System the Phone icon on the infotainment display will show the Connect Phone option in Phone Setting. Touch this option to connect. Another way to connect is to touch the Settings icon and then the Phone tab. Up to 5 devices can be paired to the Bluetooth system. Pairing only needs to be completed once, unless the pairing information on the cell phone changes or the cell phone is deleted from the system. If multiple paired mobile phones are within range of the system, the system will connect to the last connected mobile phone. c. Pairing a Phone Make sure Bluetooth has been enabled on the cell phone before the pairing process is started. Touch the Phone icon on the Home screen or the Phone tab on the Settings menu. Touch Add Device and then scan for available devices in the vicinity. Select the Smart Cars name shown on the infotainment display from your cell phones Bluetooth Settings list. Follow the instructions on the cell phone to confirm the six-digit code showing on the infotainment display and touch Pair. The code on the cell phone and infotainment display will need to be acknowledged for a successful pair. Start the pairing process on the cell phone to be paired to the vehicle. Once the cell phone is paired, it will show under Device List. If the vehicle name does not appear on your cell phone, there are a few ways to start the pairing process over:
- Turn the cell phone off and then back on.
- Go back to the beginning of the Phone menus on the infotainment display and restart the pairing process.
- Reset the cell phone, but this step should be done as a last effort Repeat above steps to pair additional cell phones. Wireless variant supports pairing of Android/ iPhone device over Wi Fi. While pairing process, infotainment will display appropriate popup to user. Based on the user selection Android/
iPhone device will be connected over Wi Fi to use Android Auto/ Apple CarPlay projection technology. 2019 Visteon Corporation Infotainment System www.visteon.com Infotainment System d. Paired Phones Touch Settings, then touch Phone tab. Touch Device List to access all paired and all connected cell phones and mobile devices. Cell phones and mobile devices can be connected, disconnected and deleted from here. Note:
In India variant, Device List should only enlist the devices paired via BT paired to the infotainment. In LATAM variant, Device List is more of a unified Device List. This implies it should enlist all the BT, Android Auto and Apple CarPlay devices which are currently paired or connected to the infotainment. e. Phone Making a Call Using Contacts and Recent Calls. Calls can be made through the Bluetooth system using personal cell phone contact information for all cell phones that support the Phone Book feature. The Contacts menu accesses the phone book stored in the cell phone. The Recents menu accesses the recents call list from your cell phone. To make a call using the Contacts menu:
- Touch the Phone icon on the Home screen.
- Touch Contacts. f. Making a Call Using the Dialpad To make a call by dialing the numbers:
- Touch the Phone icon on the Home Screen.
- Touch Dialpad and enter a phone number. on the
- Touch infotainment display to start dialing the number. g. Accepting or Declining a Call When an incoming call is received, the infotainment system mutes and a ring tone is heard in the speakers. Accepting a Call Touch infotainment display. on the Declining a Call Touch infotainment display. on the h. Bluetooth Media To play media via Bluetooth, the phone needs to be paired and connected, after that touch the BT Audio icon on the home screen. 2019 Visteon Corporation Infotainment System www.visteon.com Infotainment System 6. Wi-Fi Usage of Wi Fi in this infotainment system is limited only to Android Auto and Apple CarPlay Projection over Wi-Fi. a. Security Password
- To generate a new password touch the Setting icon on the Home Screen.
- Go to WiFi option on the Settings Screen and press Generate New button.
- To save newly generated password, press Save button. 7. Android Auto / CarPlay Android Auto and/or Apple CarPlay capability may be available through a compatible smartphone. If available, PROJECTION will appear on the infotainment display. To use Android Auto and/or Apple CarPlay:
- Download the Android Auto app to your phone from the Google Play store. No app is required for Apple CarPlay.
- Connect an Android phone or iPhone by using the compatible phone USB cable and plugging into a USB data port. For best performance, use the devices factory-
provided USB cable. Aftermarket or third-
party cables may not work.
- Android phone or iPhone can be connected over Wi-Fi by connecting them using BT with infotainment to use Android Auto/ Apple CarPlay.
- When the phone is first connected to activate Apple CarPlay or Android Auto, a message will appear requesting access to the system. Touch Continue to launch to Android Auto. Apple CarPlay projection launches directly once iPhone is connected with infotainment.
- PROJECTION on the Home screen will change to Android Auto or Apple CarPlay depending on the phone. Android Auto and/or Apple CarPlay may automatically launch upon USB connection. If not, touch the ANDROID AUTO and/or APPLE CARPLAY icon on the Home Screen or from the Device list to launch. 8. Settings To access the options below, touch the Setting icon on the home screen and select the tabs. The Settings Menu allows adjustment of different vehicle and radio features. The menu may contain the following:
a. General Settings From the General Settings option, the following may be displayed:
Language : This will display the available languages. Touch appropriate language to set it as systems language. Factory Reset : Touch to reset system to factory defaults. About : This will display current SW version of the system. b. Display Settings From the Display Settings option, the following may be displayed:
User OFF : Touch to turn off system. User OFF Mode : Touch to turn on/ off display of clock and date on the Power OFF screen. Brightness : Touch or to increase or decrease the systems brightness. Brightness 2019 Visteon Corporation Infotainment System www.visteon.com Infotainment System can also be adjusted using slider bar. volume. e. Clock Settings From the Clock option, the following may be displayed:
Sync to GPS: Touch to turn on/
off Sync to GPS Date: Touch to increase or decrease the day, month and year. Time: Touch to increase or decrease hours, minutes and AM/PM. Touch 12Hrs or 24Hrs for 12 or 24 hour clock. Time Zone: Touch to set the timezones. f. Vehicle Settings From the Vehicle option, the following may be displayed:
DRL: Touch to turn on/off the DRL. Vehicle Alerts: Touch to display the alerts present in the system. g. WiFi Settings From the WiFi option, the following may be displayed:
Password: Touch to generate and save newly generated password. c. Phone Settings From the Phone Settings option, the following may be displayed:
BT Visibility: Touch to turn on/off BT Visibiity of the system to connect a device. Add Device: Touch to add a new device. Device List: Touch to connect to a different phone source, disconnect a phone, or delete a phone. d. Audio Settings From the Audio option, the following may be displayed:
Balance & Fade Touch to adjust system balance and fader. Equalizer Touch to adjust system bass, mid and treble. Following equalizer presets can set :
- Flat
- Pop
- Jazz
- Rock
- Voice
- Classic
- Custom SDVC Touch to turn on/off the Speed Dependent Volume Control. Volume Touch to adjust the media, phone, ringtone and notification 2019 Visteon Corporation Infotainment System www.visteon.com Infotainment System 9. Supplier Info a. In vehicle Infotainment Model Name :
CRONY 2010 b. Brand Name Visteon c. Manufacturer's Name Visteon Corporation d. Manufacturer Address Address: One Village Center Drive. City: Van Buren Township State: Michigan Country: USA Zip Code: 48111 e. Manufacturer Contact Email: vistweb@visteon.com Web site: www.visteon.com f. Factory Address Visteon Amazonas Ltda Avenida Autaz Mirim, 1.030 - Bloco 04 Distrito Industrial Manaus - AM CEP: 69075-155 e-mail: scapela@visteon.com g. Factory Contact Email: vistweb@visteon.com Web site: www.visteon.com h. Type of equipment Display Audio Infotainment Unit 10.25" TP 2019 Visteon Corporation Infotainment System www.visteon.com Infotainment System FCC This device complies with Part 15 of the FCC Rules and Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. RF Exposure Safety This device complies with the FCC RF exposure limits and has been evaluated in compliance with portable exposure conditions for a distance of at least 20 cm from all persons. EU Model Name: CRONY 2010 Brand Name: Visteon One Village center drive, Van Buren Township 48111Michigan United States of America CE MARK:
Simplified EU DoC:
Hereby, Visteon Corporation declares that the radio equipment type CRONY 2010 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.visteondocs.com/
Este equipamento no tem direito proteo contra interferncia prejudicial e no pode causar interferncia em sistemas devidamente autorizados Este produto est homologado pela Anatel, de acordo com os procedimentos regulamentados pela Resoluo n 242/2000 e atende aos requisitos tcnicos aplicados. ANATEL web link :
https://sistemas.anatel.gov.br/mosaico/sch/publicView/listarProdutosHomologados.xhtml Brazil Benin Ghana 2019 Visteon Corporation Infotainment System www.visteon.com Infotainment System FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.