MVG300XM Overview Detachable, multi-functional, professional three axis gimbal with touch screen designed for DSLR and mirror-less cameras. Fixed plate safety lock Roll axis motor lock Cross arm extending position screw 1/4 inch thread hole Cross arm Tilt axis Slider knob Higher block Quick Release plate Lens holder Lens holder screw Vertical arm xed screw Pan axis Fast follow button Trigger button Portrait xed plate Cross extension arm Cross arm knob Roll axis Fixed plate safety lock Anti-drop column Versatile handle Versatile handle knob Gimbal power button Multifunction switch button A Button B Button Multifunction knob Tilt motor lock Sliding arm Fixed plate slider Fixed plate slider set screw Vertical arm Type-C charging port Pan motor lock Handle lock Touch Screen Joystick Handle Handle power button Shutter button Mode button Handle Type-C charging port 3/8 inch thread hole 1/4 inch thread hole Specication Max. Tilt Range Max. Roll Range Max. Pan Range 340 340 360 Weight Payload Capability Battery Life About 2000g 3400g 10 Hours 2500mAh Tilt Follow Speed 2/s ~ 75/s Battery Pan Follow Speed 3/s ~ 150/s Charging Time
>2.6 Hours, support quick charger 18W Compatible Cameras Sony, Canon, Nikon ,Panasonic mirror-less camera etc In center of gravity balanced state. Please download the detailed manual for the specic compatible camera and lens. 2 Accessories User Guide USB 2.0 to Type-C Type-C to Micro (A03) Type-C to TRS2.5 (T02) 1 1 1 TIPS Please read the manual carefully before using.
(1)Please install the camera before you power on the gimbal.
(2)When the battery is low, please charge the gimbal.
(3)When not in use for a long time, power o the gimbal. Type-C to Mini (B02) Type-C to Type-C (C02) 1 1 Type-C to Multi Sony shutter cable 1 1 Installing the handle Type-C to 2.5mm Panasonic shutter cable(DC2.5mm) 1 Tripod 1 Versatile handle 1 Quick release plate Higher block Short quick release plate(GimBoom) 1 1 1 Lens holder screw Camera xed screw 3/8 to1/4 inch transition screw 1 3 1 Lens holder 1 3 Slide the metal contact part at the bottom of the gimbal part toward the handle and tighten the safety lock of the handle after sliding into the corresponding groove. When unloading the handle, unlock the safety lock, catch the anti-detachment column, and slowly push out the gimbal. Install:
Unload:
1 2 3 3 2 1 2 Installing the versatile handle Unlock the versatile handle screw, put the versatile handle into the bottom of the gimbal (follow as the picture), tighten the setting screw. Lock: clockwise direction Unlock: anticlockwise direction 2 1 3 3 Charging 5 Installing the camera Be sure to fully charge the gimbal before rst use. If the battery is very low, we suggest you charge it straight away. Charging with USB2.0 to Type-C supports fast charging. 1 2 charging port can be charged simultaneously. Please lock the gimbal at the balanced lock status(as Figure 4-1), install the camera on the quick release plate and unlock the safety lock with the xed plate safety lock. Install the camera onto the quick release plate as close as possible to the sliding arm, adjusting the xed plate slider. Lock the safety lock. The position of the sliding block can be adjusted according to the size of the camera, and the higher block selected. You can refer to the above steps to mount the portrait xing plate according to needs. 1 2 1 2 Gimbal and handle charging when connected. If disconnected, only for gimbal charging. Only for handle charging 4 Motor lock Each of the three rotating axes has one positioning lock for convenient positioning and storage purposes. Be sure to unlock them before using the gimbal. Lock Unlock 2 1 3 Be sure the battery and memory card are already installed before installing the camera. Gimbal conguration 6 Gimbal balancing Before balancing the gimbal, please lock the gimbal at the balanced lock status, then unlock each axis position lock by stages. TIPS
(1)The lens cover should be removed from the camera and the memory card needs to be inserted into the camera to complete all the connections. This ensures the camera is ready for shooting.
(2) During balancing the gimbal, make sure the camera and gimbal are all power o.
(3)If you need to add accessories after the balance is completed, gimbal needs to be re-balanced again. Figure 4-1 Figure 4-2
(4) Balanced standard: the camera will remain stable at any angle. Balanced lock Stored lock Take the balancing adjustment of horizontal as an example. 4 6.1 Balancing the tilt axis 6.1.1 Adjusting sliding arm Unlock the tilt axis, turn the camera lens upwards. Unscrew the sliding arm screw. Slide vertical arm to balance it until the camera stays there at any angle, balance successful. Tighten the sliding arm screw. 2 4 6.2 Balancing roll axis Unlock Roll axis motor lock. Unscrew the cross arm screw. Move the cross arm to balancing status. Tighten cross arm screw. 3 1 2 4 3 1 Use the memory red dot to mark the balancing position 6.1.2 Adjusting the quick release plate Push the camera lens forward, unlock the quick release plate safety lock. Move the quick release plate to the camera balncing position. Lock the quick release plate with xed plate safety lock. 6.3 Balancing pan axis Unlock pan axis motor lock Hold the handle and slant it(15), put the vertical arm horizontally, unscrew the vertical arm screw Move the vertical arm to balancing status Tighten vertical arm screw. 2 3 1 1 5 8 Locking the touch screen and standby mode Lock the touch Screen: Single tap any power button to lock the touch screen. Unlock the touch Screen: Single tap any power button again to unlock it. 2 4 3 Standby mode: Double tap any power button for standby mode. Wake up mode: In the standby mode, single tap any power button or tap the icon on the touch screen to wake up the gimbal. 15 Use the memory red dot to mark the balancing position 9 Remote control The handle is a remote control. Powering on the gimbal when its combined with the handle automatically generates matching information. When used separately next time, the handle can remotely control the gimbal directly. 7 Power ON/ OFF Be sure to unlock the position lock before using the gimbal. Long press the power button and release it when you hear the beep sound. When combined, any power button can be powered on the gimbal. When separate , please power on each part. 10 Download the APP Download the Manfrotto gimbal MVG300XM App. Gimbal Power Button Handle Power Button 6 11 Connecting APP
(1) Turn on the smartphone Bluetooth, power on the gimbal.
(2) Turn on the gimbal application and follow the prompts to connect to MVG 300XM. User's manual Please download the detailed user manual from the Manfrotto.com website. 7 Disclaimer Thanks for using Manfrotto gimbal. The information in this document aects your safety and your legal rights and responsibilities. Read the entire document carefully to ensure proper conguration before use, Failure to read and follow instructions and warnings in this document may result in serious injury to yourself or others, or damage to your products or damage to other objects in the vicinity. By using this product, you hereby signify that you have read this disclaimer and warning carefully and that you understand and agree to abide by the terms and conditions herein. You agree that you are solely responsible for your own conduct while using this product, and for any consequences thereof. You agree to use this product only for purposes that are proper and in accordance with all applicable laws, rules, and regulations, and all terms, precautions, practices, policies and guideline Manfrotto has made and may make available. Manfrotto accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of product. Manfrotto will not provide any service for any product obtained from abnormal channels. Notice 1. Make sure motor spinning is not blocked by external force when gimbal is power on. 2. Gimbal DO NOT contact water or other liquid if the gimbal is not mark waterproof or splash-proof. Waterproof and splash-proof product DO NOT contact sea water or other corrosive liquid. 3. DO NOT disassembly the gimbal except is detachable available. It need send to Manfrotto after-sales or authorized service center to x it if you accidently disassembly and cause abnormal work. The relevant costs are borne by user. 4. Prolonged continuous operation may cause the motor surface temperature to rise, please operate carefully. Storage and Maintenance 1. Keep the gimbal and battery out of the reach of children and pets. 2. DO NOT leave the gimbal and battery near heat sources such as a furnace or heater. DO NOT leave the gimbal and battery inside of a vehicle on hot days. 8 3. Please storage the battery in dry environment. 4. DO NOT overcharge or overuse the battery, otherwise it will cause damage to the battery core. 5. Never use the gimbal and battery when the temperature is too high or too low. 6. Please take out batteries from gimbal if long time without using gimbal. Battery Safety Guidelines 1. To avoid re, serious injury, and property damage, observe the following safety guidelines when using, charging or storing the battery.
(1) DO NOT allow the battery to come into contact with any kind of liquid. DO NOT leave the battery out in the rain or near a source of moisture. DO NOT drop the battery into water.
(2) If the battery falls into water by accident, put it in a safe and open area immediately. Maintain a safe distance from the battery from the battery until it is completely dry. Never use the battery again.
(3) If batteries catch re, use water, water mister, sand, re blanket, dry powder, carbon dioxide re extinguisher to extinguish the re immediately. It is prone to explosion after a large re. Please choose the re extinguishing method according to above recommended order according to the actual situation.
(4) DO NOT use or charge swollen, leaky or damage battery.
(5) DO NOT disassemble or pierce the batteries in any way or the battery may leak.
(6) DO NOT drop or strike batteries. DO NOT place heavy objects on the battery or charger.
(7) DO NOT use the battery if it falls.
(8) DO NOT heat batteries.
(9) DO NOT use the batteries in strong electrostatic or electromagnetic environments. Otherwise, the battery may occur short circuit.
(10) Electrolytes in the battery are highly corrosive. If any electrolytes make contact with your skin or eyes, immediately wash the aected area with fresh running water for at least 15 minutes, and then see a doctor immediately.
(11) Please use ocial batteries are provided by Manfrotto. If you need replace the battery, please purchase at Manfrotto ocial website or authorized dealer. Manfrotto will not be responsible for the battery accident and devices malfunction cause by batteries use from unocial provided. 2. DO NOT drop or strike batteries. If the battery is abnormal, contact Manfrotto After-sales support. 9