FCC ID: 2AAAS-CM06 Vivint Doorbell Camera Pro (Gen 2)

PRINT INSTRUCTIONS:

REFERENCE SHEET FOR VS-DBC350-WHT P/N 77-600041-001 REV 1.0 |

INK: BLACK | MATERIAL: 20 LB MEAD BOND | SIZE: 8.50" X 11.00" SCALE 1:1 |

FOLDS: BI-FOLD VERTICAL, BI-FOLD HORIZONTAL (TO FIT IN BOX) Vivint Doorbell Camera Pro (Gen 2)

(VS-DBC350-WHT) Quick Reference (User Manual Installation & Operation) The Vivint Doorbell Camera Pro (Gen 2) can be added to an integrated Vivint Smart Home system, letting the homeowner know whenever a visitor comes to their door, whether that person presses the doorbell button or not, via smart notifications. With the doorbell camera, you can see and speak with the visitor (whether you are inside the home or away) via the control panel and mobile apps. The doorbell camera provides live and recorded video that can be viewed at the control panel as well as remotely via the apps; speaker and microphone array for audio/communication capabilities including two-way talk via the panel or apps; and an LED light ring on the doorbell button that indicates real-time camera function and status. Professionally installed by a Vivint technician, the doorbell camera is added to the panel network either via NFC, Wi-Fi Connect, or WPS. Once connected to the system, the doorbell camera can be used in conjunction with other smart home automation devices and features, such as remote door locks, garage door controllers, and light switches. Other features include: Night vision with IR LEDs; Full 180 FOV (field of view); Pinch-to-zoom video image; Person-triggered and/or ring notifications; Micro SD card support for on-device 24/7 playback DVR. This document includes a product description, installation and test instructions, basic operation / user functionality overview, as well as technical specifications and regulatory compliance notices and declarations. 4931 N 300 W Provo, UT 84604 Installation Instructions Installing the doorbell camera initially requires some different steps depending on whether or not there is an existing doorbell, but once the power source is set up the procedure is essentially the same. The Vivint technician should carefully read all of these installation steps (and tips) in order to ensure a successful installation and optimal performance. For additional information, refer to the Field Service Smart Home Pros website. Back Plate (inside view) Doorbell Unit (inside view) Scenario 1: IF there is an existing doorbell: a) Locate the chime box and remove the FRT and TRANS wires from the screw terminals keeping the wires separated, b) Verify the doorbell no longer has power, and c) Detach the doorbell. (NOTE: If there is a wire on the REAR terminal for a working doorbell, remove it and cap it off. Also, if there are multiple chime boxes, you need to locate them and remove their FRT and TRANS wires.) Scenario 2: IF there is no existing doorbell: a) Consulting with the homeowner, identify the best location to install the doorbell camera and also locate the nearest interior unswitched power outlet, b) Carefully drill a hole for wiring at the mounting location, and c) Run 18/2 wire from the DBC to the power source. (NOTE: If running wire on the wall or floorboard, do not use staples and always encase in wire molding. See Installation Tips below.) Next, follow these steps to pair and install the camera, and add it to the system:

1. First, pair the doorbell camera to the panel via NFC. At the panel, tap on the menu icon

() in the bottom right corner > tap Software version > enter the PIN code 2203 > tap Smart Home devices > Cameras > and then tap Add camera. 2. Tap NFC > and then tap Add. Align the logo on the front of the DBC with the white light on the panel, and hold it until pairing is complete. 3. Mount the camera. Run the power wires through the back plate's rubber grommet, and then strip and secure each wire to a screw terminal. Polarity does not matter. 4. Attach the back plate to the wall/doorframe with two screws. Secure the rubber gaskets. 5. If applicable, at the chime box, twist and cap the FRT and TRANS wires together. 6. Place the doorbell unit on the back plate, by first attaching the bottom on to the set screw, and then swinging it up so that it clips securely into the top latch. 7. Verify power is present at the DBC. The LED light will illuminate. (See LED descriptions) 8. Once the doorbell camera has finished booting (wait a few minutes), it will show online. IMPORTANT: This process should NOT be interrupted and could take several minutes in order to load firmware and configure settings. 9. Verify that you can view live video at the panel screen and with the app. INSTALLATION TIPS / BEST PRACTICES:

Push any excess wire back into the wall. No exposed wires. No exterior wire runs. If the camera view is blocked, use a spacer to adjust the angle. On brick/concrete/stucco/wood/vinyl: Use outdoor-rated screws only. Pre-drill if necessary. Do NOT use drywall screws (or any screws that won't sit flush on the back plate). Do NOT mount to metal surfaces. NOTE: Refer to the Field Service website for detailed guidelines on replacing an existing doorbell when the power source voltage is not within the 12-24V range. Operation Overview / User Functionality Once the doorbell camera is up and running, the user can perform the following functions similar to other Vivint connected cameras at the panel and via the apps. For detailed instructions, refer the homeowner to the online Help resources (articles and video tutorials) at the Vivint Support site. View a live video feed View recorded video clips Receive person-triggered (event) notifications Engage in two-way talk For camera management and configuration, at the Devices > Cameras settings page, the user can:

Adjust detection and video settings (app only) Reboot the camera Delete the camera Doorbell Camera Pro (Gen 2) (assembled) What the LED Colors Mean The camera doorbell button is highlighted by an LED light ring that displays different colors in order to indicate various functions and status, as described below. Yellow (Breathing) Booting up Green (Breathing) AP mode, ready to pair/connect Green (Blinking) WPS connection in progress (config.) Green (Fast Blinking) WPS connection success Red (Solid) WPS connection failure Blue (Solid) Two-way talk Blue (Blinking) Updating firmware Red & Green (Blinking) Factory reset (press and hold)

(Solid) Camera online Technical / Hardware Specifications Vivint Part Number (P/N) Model Number (M/N) Color Weight Dimensions Power Usage Backup Battery Connectivity Camera Lens Video Max Resolution FOV Night Vision Micro SD Card Audio Environmental Temperature Weatherproofing VS-DBC350-WHT CM06 White 9.1 oz. (approximate, includes camera and back plate) 133.5 x 43.5 x 37 mm (5.3 x 1.7 x 1.5 in) 14-24V AC 1.0A min.; 12-24V DC 1.0A min. None Wi-Fi 6 2.4GHz/5GHz; 802.11 b/g/n/ax; 2x2 MU-MIMO;

Bluetooth/BT Low Energy (BLE) 5.0; NFC tag at 13.56 MHz 5-megapixel sensor 1664p 1:1 Full 180 field of view High-powered IR LEDs (850nm) 64GB micro SD card for onboard DVR support (local storage) Built-in speaker and microphone array

-4F to 113F (-20C to 45C) Yes (IP33, with UV protection) Troubleshooting Tips Possible failures with the doorbell camera and what to do in order to resolve:

DBC is not adding (learning in) Power cycle the DBC Reset the panel network module Reboot the panel DBC is offline Verify the DBC is receiving power Verify the DBC is securely attached Reset the doorbell camera Doorbell is not ringing Check the volume at the panel Verify the doorbell chime is enabled Power cycle the DBC (and the panel next) Two-way talk is not working Make sure the button is being pressed when talking Verify the network upload speed is sufficient Power cycle the DBC (and the panel next) Wireless Product Notice Wireless communications hardware provides reliable communication; however, there are some limitations which must be observed. The transmitters are required to comply with all applicable wireless rules and regulations. As such, they have limited transmitter power and limited range. Wireless signals may be blocked by radio signals that occur on or near the wireless operating frequencies. FCC and ISED Canada Regulatory Compliance Declarations*

CAUTION! Unauthorized changes or modifications could void the users authority to operate the equipment. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules, and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation of the device. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and the receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/television technician for help. This product complies with FCC and IC RSS-102 radiation exposure limits for an uncontrolled environment. Avoid operating this product at a distance less than 7.9 in (20 cm) from the user. The transmitter module may not be co-located with any other transmitter or antenna. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. PRUDENCE! Changements ou modifications pourraient annuler le droit de l'utilisateur utiliser l'quipement non autorises. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

(1) lappareil ne doit pas produire de brouillage, et

(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Ces limites sont conues pour fournir une protection raisonnable contre les interfrences nuisibles dans une installation rsidentielle. Cet quipement gnre, utilise et peut mettre une nergie de radiofrquence et, s'il n'est pas install et utilis conformment aux instructions, il peut causer des interfrences nuisibles aux communications radio. Cependant, il n'existe aucune garantie que des interfrences no se produiront pas dans une installation particulire. Si cet quipement provoque des interfrences nuisibles la rception radio ou tlvision, ce qui peut tre dtermin en mettant l'quipement hors et sous tension, l'utilisateur est encourag essayer de corriger l'interfrence par une ou plusieurs des mesures suivantes: Rorienter ou dplacer l'antenne de reception;

Augmentez la distance entre l'quipement et le rcepteur; Connecter l'quipement une sortie sur un circuit diffrent de celui sur lequel le rcepteur est branch; Consulter le revendeur ou un technicien radio / tlvision expriment pour de l'aide. Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Le module metteur peut ne pas tre complant avec un autre metteur ou antenne. Pour les produits disponibles aux tats-Unis / Canada du march, seul le canal 1 11 peuvent tre exploits. Slection d'autres canaux n'est pas possible. FCC ID: 2AAAS-CM06 IC: 10941A-CM06

*For complete regulatory compliance information, go to: vivint.com/fcc 2022 Vivint Inc. All Rights Reserved. | www.vivint.com | 1-800-216-5232 | Device M/N: CM06 | Doc P/N: 77-600041-001 Rev. 1.0

Confidentiality Request Letter Date: January 18, 2022 Pursuant to Public Notice DA 04-1705, and in order to comply with the marketing regulations in 47 C.F.R. 2.803 and the importation rules in 47 C.F.R. 2.1204 while ensuring that business-sensitive information remains confidential until the actual marketing of newly authorized devices, we are request the Commission grant temporary confidential treatment and not release the following attachments for routine public disclosure until 90 days after the grant date. Federal Communications Commission Authorization and Evaluation Division Subject: Request for confidentiality FCC ID: 2AAAS-CM06 To whom it may concern:

Short-term Confidentiality 1. Internal Photographs 2. External Photographs 3. Users manual 4. Test Set up photos Permanent Confidentiality document from public disclosure indefinitely. 1. Block Diagram 2. Schematics Pursuant to the provisions of Sections 0.457 and 0.459 of Commissions rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential 3. Operational Description / Software Security For U-NII Devices It is our understanding that test measurement reports and correspondence during the certification review process cannot be granted confidential treatment, and such information will be available for public review once the grant of equipment authorization is issued. Sincerely, Applicant Address Signature E-mail Tel.

: 4931 N. 300 W. Provo Utah 84604 United States

: Vivint, Inc.

Name and Job Title.

: Greg Hansen, Regulatory Compliance Manager _________________________________

: greg.hansen@vivint.com

: 801-229-6008

FCC ID: 2AAAS-CM06 IC: 10941A-CM06 To Whom It May Concern:

We, Vivint. Inc., declare as below:

Date: January 24, 2022 The product identification label listing the manufacturer, model number, serial number, input rating, country of origin, and the IC and FCC Identifiers is permanently affixed to the rear surface of the doorbell camera. The identification label is readily visible to the end user when the product is removed from the packaging. After installation, the identification label is readily visible when the doorbell camera is removed from the mounting plate. The IC and FCC Identifiers and regulatory warning statements are also contained in the User Guide/Instructions. The mounting plate must be attached to the back side of the doorbell camera to provide attachment of the doorbell to the structure. The mounting plate also protects the doorbell from environmental Vivint has attached the identification label to the rear surface of the doorbell camera, as the doorbell camera is the device that is FCC certified and not the mounting plate. FCC Part 2.925 (d) (2) states, It is preferable that it (label) be visible at all times during normal installation or use, but this is not a prerequisite for grant of equipment authorization. damage. Sincerely, Applicant Address

: Vivint. Inc.

: 4931 N. 300 W. Provo Utah United States 84604 Signature

_________________________________ Name and Job Title

: Greg Hansen, Regulatory Compliance Manager E-mail Tel.

: greg.hansen@vivint.com

: 801-229-6008

Letter of Authorization Date: January 25, 2022 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Product Certification Representative Authorization Letter FCC ID: 2AAAS-CM06 Product Name: Vivint Doorbell Camera Pro (Gen 2) To whom it may concern:

We the undersigned, hereby authorize following person to act as our agent in the preparation of an application for equipment authorization to the FCC Rules and Regulations. Sporton International Inc. Address : No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333, Taiwan Name

: Leo Huang Job Title : Manager e-mail

: Leohuang@sporton.com.tw We further certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent.

: Vivint, Inc.

: 4931 N. 300 W. Provo Utah 84604 United States Applicant Address Signature

Name and Job Title.

: Greg Hansen, Regulatory Compliance Manager _________________________________ E-mail Tel.

: greg.hansen@vivint.com

: 801-229-6008

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Date: January 18, 2022 Subject: Declaration of composite/rated equipment for FCC ID: 2AAAS-CM06 To Whom it may concern, We, the undersigned, would like to declare that the composite portion catagorized as Other Class B digital devices & peripherals has been authorized under the Supplier's Declaration of Conformity (SDoC) procedures. Sincerely, Applicant Address Signature

: Vivint, Inc.

: 4931 N. 300 W. Provo Utah 84604 United States Name and Job Title.

: Greg Hansen, Regulatory Compliance Manager _________________________________ E-mail Tel.

: greg.hansen@vivint.com

: 801-229-6008