FCC ID: 2A3OS00008 CCV001

Cobalt Cube Manual V1.0 1. Introduction 1. Streamline commands 2. Modular dash display 3. Remote view 4. Robust and resilient Cobalt Cube has many features, here are some of the major benefits. Please note some of these require optional configurations. Systems such as Automatic Number Plate Recognition, lights and sirens (with controllers such as MCS) are linked via the Cobalt Cube for display on the vehicles built-in dashboard display. All vehicle systems are controlled from the same display rather than separate bulky hardware and aftermarket screens. Smartphone, PC and other required devices integrate into the single display of the dashboard, allowing safe stowage. Display and control any iPhone or Android application from the dashboard, together with applications preloaded onto Cobalt Cube. Operatives in command control can access live, secure telemetry and custom data from the vehicle via the Cloud. Remote access to vehicle cameras, sirens and locking from outside the vehicle by officers on foot or operatives at headquarters. Proven hardware that will operate even in the harshest environments. Cobalt Cube operates in the toughest climate conditions that emergency and first response vehicles will encounter. 2. Appearance and Interfaces HDMI GPS USB 2.0 Type-C DC JACK RJ45 USB-A

(CHARGING) USB 2.0 Type-A Connection DC JACK : connect to battery GPS : connects to GPS active antenna RJ45 : connect to Ethernet HDMI : connect to monitor(optional) USB-C : OTG 2.0, uses as USB device USB-A : host 2.0 USB-A : for charging 3. Product Specification Back-up Current

< 1mA Operating Temp

-20 ~ +40 Storage Temp

-40 ~ +85 Dimension(WxLxH) 143 x 94 x 22.15 mm 300 g Weight Bluetooth WIFI 5.0 (BDR, EDR, LE 1M,2M) 2402 ~ 2480 MHz 2.4G/5G 802.11 a/b/g/n/ac Item Spec Spec Power supply DC 12V, 43W HDMI port HDMI out 1EA Item GPS Ethernet USB GPS, GLONASS, GALILEO FACKRA type C RJ45 10M/100M USB-C 1EA (OTG 2.0) USB-A 1EA (host 2.0) USB-A 1EA (charging) Regulatory & Safety Notices USA: Federal Communications Commission (FCC) statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. and 2. This device must accept any interference, including interference that may cause undesired operation of the device. FCC Warning Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device should be installed and operated with minimum 20 cm between the radiator and your body. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help This device meets the FCC and IC requirements for RF exposure in public or uncontrolled environments Canada: Industry Canada (IC) statement This device meets the IC requirements for RF exposure in public or uncontrolled environments. Cet appareil est conforme aux conditions de la IC en matire de RF dans des environnements publics ou incontrle IC Notice to Users English/French in accordance with current issue of RSS GEN:

This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and 2. this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme avec Industrie Canada RSS standard exempts de licence (s). Son utilisation est soumise Les deux conditions suivantes:

1. cet appareil ne peut pas provoquer dinterfrences et 2. cet appareil doit accepter Toute interfrence, y compris les interfrences qui peuvent causer un mauvais fonctionnement du dispositif www.vncautomotive.com

VNC Automotive BetjemanHouse,104HillsRoad,Cambridge,Cambridgeshire,United Kingdom CB2 1LQ Date: 12/01/2021 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Request of Confidentiality FCC ID: 2A3OS00008 To Whom It may Concern:

Pursuant to Sections 0.457 and 0.459 of the Commission`s Rules(CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, VNC Automotive. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give VNC Automotive. temporary confidentiality of commercially sensitive information prior to product release. The requested permanent and Short-Term Confidential exhibits are listed as follows:

PERMANENT & SHORT-TERM CONFIDENTIAL LIST Description PERMANENT SHORT-TERM Exhibit 1 2 3 4 5 6 7 8 9 Block Diagram Schematics Part Lists Operation Description NA Internal Photos External Photos Test-Setup Photos User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be public before the date of the Grant for this application. Sincerely, Contact Name: Philip Handschin Title: Technical Account Manager

VNC Automotive BetjemanHouse,104HillsRoad,Cambridge,Cambridgeshire,United Kingdom CB2 1LQ Date: 12/01/2021 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Letter of Authorization We, the undersigned, hereby authorize Geunki Son of DT&C Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization for FCC ID: 2A3OS00008 including signing of all documents relating to these matters. Any and all acts carried out by Geunki Son of DT&C Co., Ltd. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from VNC Automotive. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Sincerely, Contact Name: Philip Handschin Title: Technical Account Manager