QUICK START GUIDE CONTENTS LED BEHAVIORS LED RECON AIR WIRELESS CHAT COMMUNICATOR FOR XBOX Recon Air Xbox Download the companion mobile app for iOS or Android to update your firmware as needed without having to wire in. turtlebeach.com/support IMPORTANT |
iOS Android turtlebeach.com/audiohub CONTROLS Power Button Power On (Hold for 2s) Power Off (Hold for 4s)
( 2 )
( 4 ) Pair to mobile device Pair to mobile device (Power ON, then double click)
() When ON, this functions as the Multi-Function Button
(See Features Legend)
() Multi-Function Button Connection Status LED (See Legend) LED () Mic Mute USB-C Charging Port USB-C Chat Volume Up/Down
Mic Mute
(When ON, press to mute/unmute mic)
(/) Pairing LED Indicator
(See LED Legend) LED
( LED ) Chat Volume Up/Down
A Recon Air Wireless Chat Communicator Recon Air B Recon Air Xbox Wireless B Transmitter Recon Air Xbox C Eartips Small / Medium / Large
D USB-C Charging Cable USB-C R E C ON A I R CHAT COMMUNICATOR WIRELESS Please make sure your headset is updated with the latest rmware. Any questions?
turtlebeach.com/support Model: Recon Air Wireless Chat X-RX, Recon Air Wireless Chat X-TX EN 1. Make sure your Xbox controller is connected to your console and powered on. 2. Connect your transmitter to your Xbox controllers extension port and aux jack. 3. Press button to power on the headset. Your headset and transmitter will pair automatically. Go to Audio & Music > set Headset Volume to maximum. Adjust Headset Chat Mixer all the way to the right towards the Set Mic Monitoring to your preferred level. TW 1. Xbox 2. Xbox 3.
SETUP PAIRING ADDITIONAL FEATURES Your Recon Air can pair to the transmitter and your mobile device simultaneously so you can answer calls during gameplay. Follow these instructions to pair to your mobile device:
Recon Air 1 Power on the Recon Air headset, and double press the Multi-Function Button to put the headset into mobile pairing mode. Recon Air 2 Locate the headset within your phone or tablet's Bluetooth settings and connect to it. Bluetooth The headset and transmitter are paired out of the box, indicated by the solid LED on the transmitter. If your transmitter's LED is double blinking blue, follow the steps to pair your headset and transmitter:
1. Plug the transmitter into the powered Xbox Controller, while holding down the multi-function button. 2. Press and hold the multi-function button on the transmitter until the transmitters pairing LED flashes rapidly, then release. 3. From the OFF position, press and hold the multi-function button for 5s until the LED flashes red and blue to put the headset into pairing mode. 4. Keep the headset and transmitter close together until the LED indications are solid, indicating a successful pairing. LED LED 1. Xbox 2. LED 3. 5 LED 4. LED MULTI-FUNCTION FEATURES When the headset is ON and and paired to a mobile device, the multi-function button on the headset and its transmitter will allow you to switch between your console chat and a Bluetooth phone call. Bluetooth ACTION Single Press FUNCTION When call incoming, Answer Calls Press and Hold (3s)
(3 ) When call incoming, Reject Calls Press and Hold (3s)
(3 ) Press and Hold (3s)
(3 ) Activate your devices smart assistant When call is answered, End Calls EARTIP REMOVAL To change the eartips, pull firmly to remove. Choose the eartip that fits best, align with earbud, and stretch around the grill. ADJUSTING THE EAR HOOK The Recon Air may be worn on your left or right ear. Remove the ear hook to switch its direction. Recon Air HEADSET LED LED MEANING Double Blink, Blue Headset not Paired Headset and Transmitter Paired Paired indication to dim 10 seconds after successful pair. 10 Power Off Fast Blinking, Red & Blue Mobile Pairing Mode Fast Blinking, Red & Blue Firmware Updating
(While headset is paired with mobile device)
() Solid, Blue Solid, Red Pulsing, Red Pulsing, Blue Low Battery
(While ON)
() Fully Charged
(While connected via USB)
( USB ) TRANSMITTER LED LED Fast Blinking, Blue Solid, Blue MEANING Pairing Paired Flashing, Blue Not Paired Slow Breathing, Red Mic Muted Paired indication to dim 5 seconds after successful pair. 5 The Recon Air gives you 10 hours of rechargeable battery life. Make sure to charge it regularly before storing. Recon Air 10 Regulatory Compliance Statements for Recon Air Wireless Chat X-RX, Recon Air Wireless Chat X-TX Local Restrictions on Radio Usage Caution: Due to the fact that the frequencies used by wireless devices may not yet be harmonized in all countries, these radio products are designed for use only in specific countries, and are not allowed to be operated in countries other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country of use. Any deviation from the permissible power and frequency settings for the country of use is an infringement of national law and may be punished as such. To determine whether you are allowed to use your wireless network device in a specific country, please check to see if the radio type number that is printed on the identification label of your device is listed in the manufacturer's OEM Regulatory Guidance document at the following URL http://www.turtlebeach.com/homologation or contact Turtle Beach directly. Federal Communications Commission (FCC) Compliance Notices This section includes the following FCC statements for the Recon Air :
FCC ID: XGB-2412RX (Headset), XGB-2415TX (Transmitter) Class B Interference Statement Non-Modification Statement RF Radiation Exposure & Hazard Warning Class B Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. FCC Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: [1] This device may not cause harmful interference, and (2) this device must accept any interference received, Including interference that may cause undesired operation. RF Radiation Exposure & Hazard Statements This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not co-located or operating in conjunction with any other antenna or transmitter. Non-Modification Statement Use only the supplied Internal antenna. Unauthorized anlennas, modifications, or attachments could damage the Recon Air Models and violate FCC regulations. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Please contact Turtle Beach for a list of approved 2.4 GHz antennas. This product is compliant with the Consumer Product Safety Improvement Act of 2008, Public Law 110-314 (CPSIA) Mexican IFT-008 Statement La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. aaa-ABCDE1 aaa-ABCDE2 To prevent possible hearing damage, do not listen at high volume levels for long periods. Canadian ICES Statements This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:
(1) lappareil ne doit pas produire de brouillage;
(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. RF Radiation Exposure & Hazard Statement The product complies with Canada portable RF exposure limits set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Exposition aux radiations RF & Mention de danger Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le Canada tablies pour un environnement non contrl Le produit est sr pour un fonctionnement tel que dcrit dans ce manuel. La rduction aux exposition RF peut tre augmente si lappareil peut tre conserv aussi loin que possible du corps de l'utilisateur ou que le dispositif est rgl sur la puissance de sortie la plus faible si une telle fonction est disponible. European Union and European Fair Trade Association (EFTA) Regulatory Compliance This equipment may be operated in the countries that comprise the member countries of the European Union and the European Fair Trade Association. These countries, listed below, are referred to as The European Community throughout this document:
AUSTRIA, BELGIUM, BULGARIA, CYPRUS, CZECH REPUBLIC, DENMARK, ESTONIA, FINLAND, FRANCE,, GERMANY, GREECE, HUNGARY, IRELAND, ITALY, LATVIA, LITHUANIA, LUXEMBOURG, MALTA, NETHERLANDS, POLAND, PORTUGAL, ROMANIA, SLOVAKIA, SLOVENIA, SPAIN, SWEDEN, UNITED KINGDOM, ICELAND, LICHTENSTEIN, NORWAY, SWITZERLAND Declaration of Conformity Marking by this symbol:
indicates compliance with the Essential Requirements of the Electromagnetic Compatibility Directive, 2014/30/EU and Low Voltage Directive, 2014/35/EU. This equipment meets the following conformance standards:
Safety:
EN 62368-1: 2014 (T-Mark License), IEC 62368-1: 2014 (CB Scheme certificate) EN 50332-1: 2013, EN 50332-2: 2013, EN 71-3 :2013 EN 55032: 2015, CISPR 32: 2015 EN 55024: 2010, CISPR 24: 2010 REACH 2006/1907/EC, RoHS 2015/863 amending Annex II to Directive 2011/65/EU,WEEE 2012/19/EU, Packaging 94/62/EC, Toy Safety Directive 2009/48/EC, Battery 2006/66/EC 2400MHz Emissions:
Immunity:
Environmental:
Radio frequency:
Operating frequency: 2400~2483.5MHz Max. Output power: 10dBm V_XQ02