FCC ID: XGB-3365RX Wireless Headset

Regulatory Compliance Statement for [StealthProX-RX, StealthProX-TX]

Local Restrictions on Radio Usage Caution: Due to the fact that the frequencies used by wireless devices may not yet be harmonized in all countries, these radio products are designed for use only in specific countries, and are not allowed to be operated in countries other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country of use. Any deviation from the permissible power and frequency settings for the country of use is an infringement of national law and may be punished as such. To determine whether you are allowed to use your wireless network device in a specific country, please check to see if the radio type number that is printed on the identification label of your device is listed in the manufacturer's OEM Regulatory Guidance document at the following URL http://www.turtlebeah.com/homologation or contact Turtle Beach directly. Federal Communications Commission(FCC) Compliance Notices The section includes the following FCC statements for the [StealthProX-RX, StealthProX-TX]:

FCC ID: XGB-3365RX & XGB-3365TX Class B Interference Statement Non-Modification Statement RF Radiation Exposure & Hazard Warning FCC Caution:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. Federal Radiation Exposure Statement- Transmitter To ensure compliance with FCC RF exposure requirement, this device must be installed in a location such that the antenna of the device will be greater than 20cm(7.9in.) from all persons. Using higher fain antennas and types of antennas not covered under the FCC certification of this product is not allowed. Installers or the radio and users of the product must adhere to the installation instructions provided in this manual. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Non-Modification statement:

Use only the supplied internal antenna. Unauthorized antennas, modifications, or attachments could damage the [

StealthProX-RX, StealthProX-TX]Models and violate FCC regulations. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. Please contact Turtle Beach for a list of approved 2.4GHz antennas. This product is compliant with the Consumer Product Safety Improvement Act of 2008, Public Law 110-314 (CPSIA) Canadian ICES Statement IC:

IC: 3879A-3365RX, 3879A- 3365TX This device complies with ICES-003 and RSS-247 of Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Ce dispositif est conforme aux normes NMB003 et CNR-247 d Innovation, Sciences et Dveloppement conomique Canada exempt(s) de licence(s). Lexploitation est autorise aux deux conditions suivantes :

1. Lutilisation de ce dispositif est autorise seulement aux conditions suivantes :

2. il ne doit pas produire de brouillage et lutilisateur du dispositif doit tre prt accepter tout brouillage radiolectrique reu, mme si ce brouillage est susceptible de compromettre le fonctionnement du dispositif To prevent radio interference to the licensed service (i.e. co-channel Mobile Satellite systems) this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing and not supported by [StealthProX-RX, StealthProX-TX] RX & TX Models. Pour viter les interfrences radio au service agr (c.--d. Les systmes par satellite mobile co-canal), cet appareil est destin fonctionner l'intrieur et l'extrieur des fentres pour assurer un blindage maximal. L'quipement (ou son antenne d'mission) install l'extrieur est soumis l'octroi de licences et n'est pas pris en charge par les modles

[StealthProX-RX, StealthProX-TX] RX & TX. RF Radiation Exposure & Hazard Statement To ensure compliance with RSS-102 RF exposure requirements, this device must be installed in a location such that the antenna of the device will be greater than 20cm(7.9in.)away from all persons. Using higher gain antennas and types of antennas not covered under the IC certification of this product is not allowed. Installers of the radio and end users of the product must adhere to the installation instructions provided in this manual. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Exposition aux radiations RF & Mention de danger Pour assurer la conformit avec les exigences RSS-102 d'exposition aux RF (Radio Frquences), cet appareil doit tre install dans un endroit ou l'antenne de l'appareil sera situe une distance de plus de 20cm(7.9po.)de toutes personnes. Lutilisation d'antennes gain plus lev et les types d'antennes qui ne sont pas couverts en vertu de la certification IC de ce produit n'est pas autorise. Les installateurs de la radio et les utilisateurs du produit final doivent se conformer aux instructions d'installation fournies dans ce manuel. Cet metteur ne doit pas tre co-implant ou exploit en conjonction avec toute autre antenne ou transmetteur. European Union and European Fair Trade Association Regulatory Compliance This equipment may be operated in the countries that comprise the member countries of the European Union and the European Fair Trade Association. These countries, listed below, are referred to as The European Community throughout this document: AUSTRIA, BELGIUM, BULGARIA, CYPRUS, CZECH REPUBLIC, DENMARK, ESTONIA, FINLAND, FRANCE,, GERMANY, GREECE, HUNGARY, IRELAND, ITALY, LATVIA, LITHUANIA, LUXEMBOURG, MALTA, NETHERLANDS, POLAND, PORTUGAL, ROMANIA, SLOVAKIA, SLOVENIA, SPAIN, SWEDEN, UNITED KINGDOM, ICELAND, LICHTENSTEIN, NORWAY, SWITZERLAND Declaration of Conformity Marking by this symbol:

Indicates compliance with the Essential Requirements of the Radio Equipment Directive (RED) of the European Union

(2014/53/EU). This equipment meets the following conformance standards:

Safety EN 62368-1: 2014 + A11 (T-Mark License), IEC 62368-1: 2014 (CB Scheme Certificate), EN 50332-1: 2013, EN 50332-2: 2013, EN 71-3: 2013 Additional licenses issued for specific countries available on request EN 55032: 2015; CISPR 32: 2015, EMC EN 301 489-1 v2.1.1 (2017-02), EN 301 489-17 v3.1.1 (2016-11), EN 61000-4-2: 2009, EN 61000-4-3: 2006 + A1: 2008 + A2: 2010, EN 61000-4-8: 2010 The products are licensed, as required, for additional country specific standards for the International Marketplace. Additional issued licenses available upon request Radio SAR(MPE) Environmental EN 300 328 v2.2.2 EN 62311:2020 RoHS 2015/863 amending Annex II to 2011/65/EU, WEEE 2012/19/EU, REACH 2006/1907/EC, Packaging 94/62/EC, Battery 2006/66/EC, Toys Safety Directive 2009/48/EC Warning!

This is a Class B product. In a domestic environment, this product may cause radio interference, in which case, the user may be required to take appropriate measures. Achtung!

Dieses ist ein Gert der Funkstrgrenzwertklasse B. In Wohnbereichen knnen bei Betrieb dieses Gertes Rundfunkstrungen auftreten, in welchen Fllen der Benutzer fr entsprechende Gegenmanahmen verantwortlich ist. Attention!

Ceci est un produit de Classe B. Dans un environnement domestique, ce produit risque de crer des interfrences radiolectriques, il appartiendra alors lutilisateur de prendre les mesures spcifiques appropries. This symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste for recycling, please contact your local authority, or where you purchased your product. Turtle Beach Europe Ltd is obligated as a producer with a main activity of selling under The Producer Responsibility Obligations

(Packaging Waste) Regulations 2007. To fulfil our obligation we are registered with Comply Direct and their Recycling Room. Here you will find advice and information on packaging waste management, recycling symbols and the waste hierarchy principles of reduce, reuse and recycle. https://www.complydirect.com/the-recycling-room/

Please visit the following URL for a complete copy of the Declaration of Conformity: http://www.turtlebeah.com/homologation

/Battery Caution:

Do not disassemble, impact, squeeze or throw into fire;

Do not continue to use if severe swelling;

Do not place in a high temperature environment;

Dispose of used batteries according to the instructions.

STEALTH PRO FOR XBOX STEALTH PRO POUR XBOX Complete Manual Available Manuel Complet Disponible turtlebeach.com/support Mode SteathProX RX, StathProXTX Models: StealthProX-RX, StealthProX-TX. IMPORTANT PLEASE MAKE SURE YOUR HEADSET IS UPDATED WITH THE LATEST FIRMWARE. IMPORTANT VEUILLEZ VOUS ASSURER QUE VOTRE CASQUE DISPOSE DE LA DERNIERE VERSION DU MICROLOGICIEL. Download the Turtle Beach Audio Hub V2 for Windows or Mac to update your headset before use, Create your own EQ's, adjust active noise. cancellation, reassign headset functions, check your headset vitals, Tlchargez Turtle Beach Audio Hub V2 pour Windows ou Mac afin de mettre votre casque & jour avant de lutilser.Crez votre propre EQ, ajustez isolation acoustique active, rassignez les fonctionnalits, ddu casque et vrifiez son tat, turtlebeach.com/audiohub COMPATIBILITY COMPATIBILITE Xbox Series XIS & Xbox One Mobile PSS & PSA PC & Mac?

PC & Mac? Nintendo Switch"? (chat not available)

(chat non disponible) Nintendo Switch (docked [sur sation)

* Some feeture not avaible over Bluetoth*connsction, | Certsnes fon

* Chat ot valable in handheld mode. via comesionB MICROPHONES MICROPHONES e haa TruSpeak Mic H Insta the mic boom and easily mute yourself by lpping it up, |

When your mic boom is not installed, the Stealth Pr will switch tots built-in mic. igre sont pas cones Installez la micro amovible et mettez-vous facilement en sourdine ene retournant. Lorsque votre micro amovible rest pas install le Stealth Pro passe sur le micro int6gr, |

Builth Mic Use the built-in microphone for easual gaming and taking calla Press the Superhuman Hearing button once to activate/deactivate Superhuman Hearing, and press and hold for 2s to mute/unmute. Utilisor le microphone intgr pour les jeux occasionnols ot la prise d'appols. Appuyez une fois sur le bouton Superhuman Hearing pour activer/dsactiver +

Superhuman Hearing, et maintenez enfone pendant 2 secondes pour activer/dsactiver le micro intgr. HEADSET & TRANSMITTER CONTROLS CONTROLES DU CASQUE ET DE L'EMETTEUR Volume Wheel MODE Button Master volume is the primary function. Active Noize Cancellation on/of by default Secondary function is Game/Chat Mx by default Remappable in TURTLE BEACH AUDIO HUB app. {available in Xbox mode only. Alternative function maybe assigned in TURTLE BEACH AUDIO HUB app. Molette du volume Le volume principal est la principale fonctionnait. La fenctionnalit secondaire par dfautconcerne les Mixages des sons du jeu et du chat disponibles uniquement en mode Xbot. La fnetionnait alternative peut tre assigne dans application TURTLE BEACH AUDIO HUB. Bouton MODE Activation/dsactivaton de isolation acoustique active par daut Peut rerassign dans

(application TURTLE BEACH AUDIO HUB, LED Status Indication See LED Behaviors inthe Complete Manual Indication tat par LED Consult Comportements des LED dans le Manuel Complet USB-C Charge/Update Port Port de mise ajour/charge USB-C Superhuman Hearing On/Off Press (1s) Mute/Unmute Built-in Mic Press & Hold (25) Activation/Dsactivation de Superhuman Hi Appuyer (13) Activer/Dsactiver le son du Power Bluetooth Multi-function Button Press (25) Power on/off See Bluetooth Pairing in the Complete Manual Malntanirsppuys (28) Alimentation Bouton multifonction Bluetooth Appuyer (25) = Allumer/Eteindre Consulter 'appairage Bluetooth dans le Manuel Complet SETUP FOR XBOX CONFIGURATION POUR XBOX Beer eri esto te olathe headsets power button for 2 seconds, Verfiz que votre mettour est configur sur Maintonez appuy le bouton dalimentaton Sold green LEDs willindcateesuecessfulpaiz, f=) Make sure your Stealth Proisasiged to Une LED verte inquera qu apparage estrous, CO) your Xbox rote eilez ce que vetre Stealth Prost assgn votre prot bx. 1. Asogiirate de que eltransmisor est en mod Xbox. 2.Mantn pulsado el botn de encendl durante 2 segundos. 3.Laluz LED verde continua indicar una vinculacin correcta. 4. Asegarate de que tu Stealth Pro se haya asignado atu perf de Xbox. Lid 1, Assicurati che iltuo trasmettitore modalita "Xbox". 2. Tieni premuto il pulsante di accensione per 2 secondi. 3, ILED verdi fissi indicheranno unt associazione effettuata con successo. 4 Assicurati che le Stealth Pro siano assegnate al tuo profilo Xbox. impostato sulla SE 1, Se tll att sindaren dir i liget Xbox, 2, Hall in strmknappen i2 sekund. 3, Ett fast grint sken botyder att parkopplingen lyckades, 4, ontrollera att Stealth Pro ar tilldelad din Xbox-profil, NL 1. Zorg dat de zenderis ingesteld op de Xbox-modus. 2, Houd de aan/uit-knop gedurende 2 seconden ingedrukt. 3, De led-lampjes branden groen als de koppeling is geslaagd. 4,Zorg ervoor dat je Stealth Pro is toegewezen aan je Xbox-profiel, DE 1. Vergewissere dich, dass der Sender auf ,Xbox"-Modus eingestell ist. 2. Halte die Stromtaste fr 2 Sekunden lang gedriickt. 3. Konstant grin leuchtende LEDs zeigen eine erfolgreiche Kopplung an. 4, Vergewissere dich, dass das Stealth Pro Headset deinem Xbox-Profil zugewiesen ist. PT 1. Certfica-te de que o teu transmissor esta em modo Xbox. 2, Mantm o botdo de energia pressionado durante 2 segundos.

'3.As luzes LED com verde fixoindicam um emparelhamento bom-sucedido, 4, Cerifica-te de que os tous Stealth Pro estio atribuidos 0 teu Perfil Xbox, DK 1, Sarg for, at din transmitter er sat tl Xbox-tlstand, 2. Hold taand/stuk-knappen nede i 2 sekunder. 3. Konstant grant LED-Iys indikerer en succesfuld parring. 4, Sorg for, at dit Stealth Pro er tildet tl din Xbox-profil. 1. MRD MRED Xbox; xt. 2 REM Re 2 3. LED HRRERTEN ALT. 4, HAREM) Stealth Pro CARVE IM Xbox MEE. cH 1. ARGC EIRED"Xbox ET, 2 RBM. ZENS, MELEDTABR. 4, TET ARBM Stealth Pros BoB BA Xboxt sR. SETUP IN PC MODE CONFIGURATION EN MODE PC PC, Mac, PlayStation & Nintendo Switch (docked | sur station) Ensure your transmitter is set to PC mode, Hold the headset's power button for 2 seconds. Vritiez que votre metteur est configur sur Maintenez appuy le bouton d'alimentation lemode PC, pendant 2 secondes, Q Solid green LEDs will indicate a successful pair. Make sure your Stealth Pro is selected as the Une LED verte indiquera que appairage est russi, Input and output device within your device's audio settings. Veillez ce que votre Stealth Pro soit slectionn comme priphrique dentre et sortie dans les options audio de votre appareil. ES 11 Asegiirate de que el transmisor est en modo PC. 2, Mantn pulsado el botn de encendide durante 2 segundos. 3. La luz LED verde continua indicar una vinculacin correcta. 4, Asogurate de que tu Stealth Pro se haya selecci dispositivo de entrada y de salida en los ajustes 4, Assicurati che le Stealth Pro siano selezionate come dispositive dientrata e uscita nelle impostazioni SE 1, Se tll att stindaren ar i liget PC. 2, Hall in strmknappen i2 sekunder, 3. Ett fast grnt sken betyder att parkopplingen lyckades. 4, Kontrollera att Stealth Pro valjs som ingngs- och uutgangsenhet i enhetens ljudinstallningar. NL 1. Zorg dat de zenderis ingesteld op de PC-modus. 3, De led-tampjes brander 4, Zorg ervoor dat je Stealth Pro is geselectoord als het invoer- on. uitvoorapparaat in de goluidsinstellingen van je apparaat, DE 1. Vergewissere dich, dass der Sender auf ,PC*-Modus eingestellt ist. 2. Halte die Stromtaste fr 2 Sekunden lang gedriickt. 3. Konstant grin leuchtende LEDs zeigen eine erfolgreiche Kopplung an. 4, Vergewissere dich, dass dein Stealth Pro Headset inden Audio-Einstellungen deines Gerats als Eingabe- und Ausgabe-Gerdt ausgowahit ist, PT 1. Cortficaste de que o teu transmissor est em modo PC, 2,Mantm o botio de energia pressionado durante 2 segundos. As luzes LED com verde fixoindicam um emparelhamento bemesucedido, 4, Caricaste de que os tous Stealth Pro esti selcionados, come dispositive de entrada e saida nas definipdes de dudio do teu dispositive DK 1. Sorg for, at ain transmiter er sat tiPC'-tilstand, 2.Hol tzend/sluk-knappen nede 2 sekunder. 3.Konstant grant LED-Iysindikerer en succesfuld parting. 4, Sorg for, at dit Stealth Pro er valgt som input- 0g outputenhed i enhedens lydindstilling 1, BERS MARLEM (PC) Bist 2 EMR 2D, 3, LED HRAEZE RCN ADD, 4, PRO CRH SAME PI Stealth Pro SAMARIMLEE, cH 1, HRSA RIRE PC", 2 RMR. 2AM, ROLEDTARR, 4 HO ROER SATA, Stealth Pro EAE FUMIO EE. 426-206-005-500 RA

Voyetra Turtle Beach, Inc. Date: 2023-01-16 TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 From:

Regarding:

Confidentiality Request regarding application for FCC ID: XGB-3365RX LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby requests confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Print Name: Joe Stachula Signature:

Title: CTO On behalf of Company: Voyetra Turtle Beach, Inc. Telephone: 001-408-638-7381 E-mail: joe.stachula@turtlebeach.com

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Voyetra Turtle Beach, Inc. Applicant Declaration Address Grantee Code FCC ID Authorized Contact Name Contact Email Contact Phone 44 South Broadway 4th Floor, 10601, White Plains New York 10595 United States XGB XGB-3365RX Joe Stachula joe.stachula@turtlebeach.com 001-408-638-7381 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

a) b) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, c) d) e) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) g) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Voyetra Turtle Beach, Inc (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Voyetra Turtle Beach, Inc (the applicant) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to 1.50002, as an entity producing covered equipment. Applicant Signature:

Date: 2023/02/15 Print Name:

Title:

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Joe Stachula CTO QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021

Voyetra Turtle Beach, Inc. Date: 2023-01-16 TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: XGB-3365RX To whom it may concern:

We, the undersigned, hereby authorize Compliance Certification Services (Kunshan) Inc to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own.. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Voyetra Turtle Beach, Inc. This authorization is valid until further written notice from the applicant. Print Name: Joe Stachula Signature:

Title: CTO On behalf of Company: Voyetra Turtle Beach, Inc. Telephone: 001-408-638-7381 E-mail: joe.stachula@turtlebeach.com

UNITED STATES DESIGNATED AGENT LETTER Date: 2023-02-15 TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: Voyetra Turtle Beach, Inc. XGB Grantee Code:

Joe Stachula Contact Name:

44 South Broadway 4th Floor, Address:

10601, White Plains New York 10595 United States Company Name: Voyetra Turtle Beach, Inc. FRN Contact Name:

Address:

0018834572 Joe Stachula 44 South Broadway 4th Floor, 10601, White Plains New York 10595 United States City/Province/Zip: 10601 Telephone:

Fax:

Email:

001-408-638-7381 001-408-796-7416 joe.stachula@turtlebeach.com Email:

City/Province/Zip: 10601 Telephone:

Fax:

001-408-638-7381 001-408-796-7416 joe.stachula@turtlebeach.com Applicable Equipment: FCC ID: XGB-3365RX ATTN: Director of Certification:

We, < Voyetra Turtle Beach, Inc.> and < Voyetra Turtle Beach, Inc.> understand and acknowledge the applicants consent and the designated agents obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, < Voyetra Turtle Beach, Inc.> and < Voyetra Turtle Beach, Inc.> acknowledge the applicants acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name (Printed): Joe Stachula Name (Printed): Joe Stachula Title: CTO Signature:

Title: CTO Signature: