FCC ID: 2A7M5-WP9510 Mini Printer

LABEL PRINTER Quick Start Guide Ver.1.0 Product View How to Use Power ON/OFF Long press 2 seconds to Turn ON/OFF Indicator light on: Normal running/ Full charged Indicator light flash quickly: Error runningLack of paperthe direction of the paper reversed, Low battery IndicatorPrinting head overheating Indicator light flash slowly :Charging Charge Please plug the device into the USB cable and connect it to adapter or the computer for charging fully before the first use. When the indicator light flashes quickly during charging, check if it means lack of paper. If so, then load the thermal paper, next check if the charging is normal.

*The product is sold without a power adapter. In the user manual stated if consumers use a p ower adapter for power supply, they should bu y a matching power adapter that has obtained CCC certification and meets the standard requi rements. When the device does not respond, try to insert the pin/toothpick into the reset hole for 3 seconds and then Download iLabelAPP User can scan QR code below or search iLabel in APP Store/Google Play to download it. Reset release. 3.

(Android 6.0 or above and iOS 9.0 or above) After power on, double click the button to print QR code, scan the QR code to download iLabel APP. Connect to print 1. etc) of the phone. Turn on the phone Bluetooth and the APP, allows applications to gain access (photos, media, files 2. Then open the APP, connect the device by scan the same QR code printed before. Chose [Label printing] and create new label according to the prompts. Replace the Thermal Paper

(1) Refer to the picture(1) to push and open the flip cover.

(2) Refer to the picture(2) to insert the thermal paper, with the thermal paper facing up.

(3) Refer to the picture(3) to pull out a piece of paper to the outside of the device, and then close the cover. Pay attention to avoid misalignment of the thermal paper. Do not touch the printing head to avoid scalding when changing the printing paper. Parameters Product Dimension131.0*86.7*32.5mm Print TypeThermal Printing Paper Height15mm Printing Height12mm Paper Cutting Method: Manual paper cutting Capacity1000mAh Lithium Battery Charging TimeAbout 2~3 Hours Input Charging PortType-C Safety Precautions This product is with built-in lithium battery, please do not use it higher than 40 , do not close to the fire and other sources of heat, do not placed in the hot sun. Do not remove, impinge, puncture or modify the battery. Do not use the battery for other purposes. Do not put the product in fire or water to avoid short circuit of the battery causing fire or burns. Please do not use this product in high humidity or dusty areas Please gently insert or unplug the charging cable to prevent excessive force from damaging the charging interface. Frequently Asked Questions Q No connectable devices were found when adding devices?

AWhen adding the device, please check whether the power of the device is enough to work. QThe device can not print. How to do?

A Confirm whether the Bluetooth of the mobile phone is on, and exclude the possibility of others connecting to this device. Check whether the thermal paper has been used up, timely replacement of the thermal paper. Printing head is overheating, if overheating, please let the printing head cool before trying to print. Restart the device, if still can not solve, please use the pin inserted into the reset hole for reset. Q Why is it all white papers instead of content?

A It may be caused by the incorrect installation of the thermal paper. Please refer to the introduction of replacing the thermal paper for re-installation. Q Why the printed getting lighter?

A Check whether the device is low battery. Check whether the printing head and wheel is covered with carbon ink, please wipe with alcohol softly. Package Printer User Manual Thermal Paper USB Cable This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be u sed in portable exposure condition without restriction

VSON TECHNOLOGY CO., LTD. Agent Authorization Company: VSON TECHNOLOGY CO., LTD. Ltd.Address: 6/F, Baicai Intellectual Innovation Space, No. 68, Chaoyang Road, Yanchuan community, Yanluo street,Baoan District, Shenzhen, Guangdong, China Product Name: Mini Printer Model Number(s): WP9510, WP9520,WP9501,WP9502,WP9503,WP9505L,WP9505T,WP9506,WP9508,WP9509 WP9511WP9512WP9513WP9515WP9516WP9518WP9519WP9522 WP9523WP9525WP9526WP9528WP9529, WP9530WP9532WP9533 WP9535WP9536WP9538WP9539WP9550, WP9551, WP9552, WP9553, WP9555, WP9556, WP9559 Product Description: Mini Printer We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Date: 2022-06-27 Signature:

Name:

Sally Zhang manager Title:

Company: VSON TECHNOLOGY CO., LTD.

VSON TECHNOLOGY CO., LTD. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2022/06/27 Subject; Request for Confidentiality FCC ID: 2A7M5-WP9510 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

User Manual OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Sally Zhang Title: manager

VSON TECHNOLOGY CO., LTD. Data2022.06.27 Model Difference Product description: Mini Printer Model name: WP9510, WP9520,WP9501,WP9502,WP9503,WP9505L,WP9505T,WP9506,WP9508,WP9509 WP9511WP9512WP9513WP9515WP9516WP9518WP9519WP9522 WP9523WP9525WP9526WP9528WP9529, WP9530WP9532WP9533 WP9535WP9536WP9538WP9539WP9550, WP9551, WP9552, WP9553, WP9555, WP9556,WP9559 Trade Name: N/A FCC ID: 2A7M5-WP9510 All the model are the same circuit and RF module, except model names . Regards Sincerely Clients signature :

Clients name / title : Sally Zhang (manager) Contact information / address: 6/F, Baicai Intellectual Innovation Space, No. 68, Chaoyang Road, Yanchuan community, Yanluo street,Baoan District, Shenzhen, Guangdong, China