| all | frequencies |
|
exhibits | applications |
|---|---|---|---|---|
| manual |
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 2 |
|
User Manual | Users Manual | 2.44 MiB | August 03 2013 | |||
| 1 2 | Cover Letter(s) | August 03 2013 | ||||||
| 1 2 | Test Setup Photos | August 03 2013 | ||||||
| 1 2 | External Photos | August 03 2013 | ||||||
| 1 2 | Internal Photos | August 03 2013 | ||||||
| 1 2 | ID Label/Location Info | August 03 2013 | ||||||
| 1 2 | Cover Letter(s) | August 03 2013 | ||||||
| 1 2 | RF Exposure Info | August 03 2013 | ||||||
| 1 2 | Test Report | August 03 2013 | ||||||
| 1 2 | Test Report | August 03 2013 | ||||||
| 1 2 | Attestation Statements | August 03 2013 |
| 1 2 | User Manual | Users Manual | 2.44 MiB | August 03 2013 |
Users manual TL96273/TL96373/TL96473/
TL96323 DECT 6.0 cordless telephone/
answering system with BLUETOOTH wireless technology Congratulations on purchasing your new AT&T product. Before using this AT&T product, please read Important safety information on pages 111-117 of this users manual Please thoroughly read the users manual for all the feature operations and troubleshooting information you need to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. This telephone system is compatible with certain AT&T DECT 6.0 cordless headsets. Visit www.telephones.att.com/headsets for a list of compatible cordless headsets. TL96273 (two handsets) TL96373 (three handsets) TL96473 (four handsets) TL96323 (three handsets) DECT 6.0 cordless telephone/answering system with Bluetooth wireless technology Model number:
Type:
Serial number:
Purchase date:
Place of purchase:
Both the model and serial number of your AT&T product can be found on the bottom of the telephone base. Compatible with Hearing Aid T-Coil Telephones identified with this logo have reduced noise and interference when used with most T-coil equipped hearing aids and cochlear implants. The TIA-1083 Compliant Logo is a trademark of the Telecommunications Industry Association. Used under license. T TIA-1083 The ENERGY STAR program (www.energystar.gov) recognizes and encourages the use of products that save energy and help protect our environment. We are proud to mark this product with the ENERGY STAR label indicating it meets the latest energy efficiency guidelines. The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Advanced American Telephones and its parent, VTech Holdings Limited, is under license. VTech Holdings Limited is a member of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners. 2013 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219. Printed in China. Parts checklist Your telephone package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary. Users manual TL96273/TL96373/TL96473/
TL96323 DECT 6.0 cordless telephone/
answering system with BLUETOOTH wireless technology wireless technology Quick start guide TL96273/TL96373/TL96473/TL96323 This quick start guide provides you with basic instructions only. For more complete instructions, refer to your users manual provided in the package, or see the online users manual at www.telephones.att.com/manuals. Telephone base and charger installation Plug the large end of the telephone base power adapter into a power outlet not controlled by a wall switch. Route the power adapter cord through this slot. Raise the antenna. Plug the small end of the telephone base power adapter into the power adapter jack on the back of the telephone base. Plug one end of the telephone line cord into a telephone jack or a DSL filter. If you have DSL high-speed Internet service, a DSL filter
(not included) is required. The DSL filter must be plugged into the telephone wall jack. Telephone line cord Route the telephone line cord through this slot. Plug the other end of the telephone line cord into the telephone jack on the back of the telephone base. Caution: Use only the power adapter provided with this product. To obtain a replacement, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Users manual Quick start guide Cordless handsets
(2 for TL96273)
(3 for TL96373)
(4 for TL96473)
(3 for TL96323) Telephone base with wall mount bracket attached Telephone line cord Power adapter for telephone base B a t t e r y P a c k
l B o c
p i l e s
W A R N N G I
I A V E R T S S E M E N T
B T 1 8 3 3 4 2 B T 2 8 3 3 4 2
2
. 4 V 4 0 0 m A h N i
M H
) D O N O T B U R N O R P U N C T U R E B A T T E R E S I
. N E P A S I I N C N R E R O U P E R C E R L E S P L E S I
. M a d e i n C h n a i
F a b r i q u e n c h n e i B Y 1 1 4 2 I T H S S D E U P I
C E C T V E R S L E H A U T Batteries for cordless Battery compartment handsets
(2 for TL96273)
(3 for TL96373)
(4 for TL96473)
(3 for TL96323) covers
(2 for TL96273)
(3 for TL96373)
(4 for TL96473)
(3 for TL96323) Charger for cordless handset with power adapter installed
(1 for TL96273)
(2 for TL96373)
(3 for TL96473)
(2 for TL96323) Users manual TL96273/TL96373/TL96473/
TL96323 DECT 6.0 cordless telephone/
answering system with BLUETOOTH wireless technology Table of contents Getting started Quick reference guide - telephone base ................................................................... 3 Quick reference guide - handset ........ 4 Telephone base main menu .................. 7 Handset main menu .................................. 8 Installation ...................................................10 Telephone base installation ................11 Charger installation .................................12 Battery installation and charging .....13 Battery charging .......................................14 Installation options ..................................15 Tabletop to wall mount installation .............................................15 Wall mount to tabletop installation .............................................16 Introducing Bluetooth ............................17 Glossary of terms .....................................18 Bluetooth setup ........................................19 Add a cell phone ................................19 Add a headset ......................................21 Auto connection ..................................22 Bluetooth connection from idle mode .........................................................22 Device list and connection ............23 Review the device list ......................23 Connect/disconnect an active device .......................................................23 Remove a paired device ..................24 Rename a paired device..................25 Replace an active device ................26 Download directory ...........................27 Interruption to directory download ................................................29 View the directory download information ............................................29 Change PIN ............................................30 Telephone settings Handset and telephone base settings ..........................................................31 Ringer volume ......................................31 Ringer tone ............................................32 Set date and time ...............................33 Settings ....................................................34 LCD language .......................................34 Display alerts ........................................35 Missed call indicator .........................35 Voicemail indicator ............................36 No line .....................................................37 Download fail .......................................38 Use caller ID to automatically set date and time ...............................39 Rename handset or the telephone base ....................................40 Key tone ..................................................41 Dial mode ...............................................41 Caller ID announce ............................42 Website ....................................................43 Home area code ..................................43 Cell area code ......................................44 Telephone operation Make, answer and end a call ..............45 Make, answer or end a home call ................................................45 Call waiting on the home line .....46 Make, answer or end a cell call ............................................................47 Call waiting on the cell line ..........48 Answer an incoming cell call while on a home call ........................49 Answer a home call while on a cell call ....................................................50 Conference calls .......................................51 Conference home and cell calls ...........................................................51 Options while on calls ...........................52 Speakerphone ......................................52 Volume control ....................................52 Silencing the ringer ...........................52 Mute ..........................................................53 Temporary tone dialing ...................53 Hold ...........................................................54 Equalizer ..................................................54 Chain dialing .........................................55 Transfer a call .......................................55 Redial..............................................................57 Review the redial list ........................57 Dial a redial entry ...............................57 Save a redial entry to the directory ..................................................58 Delete a redial entry .........................59 Handset locator .........................................60 Multiple handset use Join a call in progress ...........................61 Intercom ........................................................62 Initiate an intercom call ..................62 Answer an incoming call during an intercom call ..................................64 Call transfer using intercom ...............65 Push-to-talk (PTT) ....................................67 PTT on/off ..............................................67 PTT to a single device ......................68 PTT to a group of devices ..............70 Answer a PTT call ...............................72 Change a one-to-one PTT call to an intercom call ............................73 End or leave a PTT call ....................74 Answer an incoming call during PTT .............................................................74 Make an outgoing call during PTT .............................................................75 Directory About the directory .................................76 Create and review entries ....................77 Create a new entry in the home directory ..................................................77 Dialing keys ...........................................79 Add a predialed telephone number to the directory ..................80 Review the directory .........................82 3-character alphabetical search .......................................................83 Dial, edit or delete a directory ..........84 Dial a directory entry ........................84 Edit a directory entry ........................85 Edit the type of a directory entry ..........................................................87 Delete a directory entry ..................87 Remove a downloaded directory ..................................................88 Speed dial directory ................................89 Assign a speed dial directory entry ..........................................................89 Review the speed dial directory ..................................................90 Dial a speed dial entry.....................90 Reassign a speed dial entry ..........90 Caller ID About caller ID ..........................................92 Information about caller ID with call waiting ............................................92 Caller ID operation ..................................93 How the caller ID history
(caller ID log) works ..........................93 Memory match .....................................93 Review the caller ID log ..................94 View dialing options ..........................96 Dial a caller ID log entry ................96 Save a caller ID log entry to the directory ..................................................97 Delete from the caller ID log .......99 Answering system Answering system settings ...............101 Answer ON/OFF ...............................101 Announcement .................................102 Play your announcement ............102 Record your own announcement ..................................103 Delete your announcement ........104 Call screening at the telephone base or handset ...............................105 Number of rings ...............................106 Remote access code ......................107 Message alert tone .........................108 Temporarily turning off the message alert tone .........................108 Recording time ..................................109 Message playback .................................112 Delete all old messages ...............114 Record and play memos ..............115 Remote access ........................................116 To remotely access the answering system ............................116 Remote commands .........................116 Appendix Handset screen icons ..........................117 Telephone base screen icons ..........118 Alert tones and lights .........................119 Handset alert tones ........................119 Telephone base alert tones ........119 Handset indicator lights ...............119 Telephone base indicator lights ......................................................120 Screen messages ...................................121 Display screen messages .............121 Expand your telephone system ......124 Add and register handsets
(optional)..............................................124 Deregister handsets .............................125 Deregister all handsets .................125 Troubleshooting .....................................126 Maintenance.............................................139 Important safety information ..........140 Especially about cordless telephones ..........................................140 Precautions for users of implanted cardiac pacemakers ....141 Pacemaker patients ........................141 Especially about telephone answering systems ..........................141 FCC Part 68 and ACTA ........................142 FCC Part 15 ..............................................143 Limited warranty ....................................144 Technical specifications .....................146 DECT 6.0 digital technology .......146 Telephone operating range ........146 Redefining long range coverage and clarity ...........................................146 HD audio ..............................................146 Index ............................................................147 Getting started Quick reference guide - telephone base REDIAL/PAUSE Press repeatedly to view the last 10 numbers dialed (page 59). While entering numbers, press and hold to insert a dialing pause (page 83). 1 While reviewing a caller ID history entry, press repeatedly to add or remove 1 in front of the telephone number before dialing or saving it in a directory
(page 101). Press and hold to set (page 14) or to dial your voicemail number (page 28).
/HANDSET LOCATOR Press the button to page all system handsets
(page 63). Press and hold to begin handset deregistration
(page 130). VOLUME Press to adjust the volume during message playback (page 117). Press to adjust the volume during a call
(page 52). When the phone is not in use, press to adjust the telephone base ringer volume for all lines (page 31). PTT Press to display the PTT menu to begin a PTT call. Press and hold to begin a one-to-group broadcast when the handset is not in use. QUIET # (pound key) Press repeatedly to display other dialing options when reviewing a caller ID log entry (page 39). Press and hold to enter the QUIET mode setting screen, or to deactivate QUIET mode (page 18). TONE Press to switch to tone dialing temporarily during a call if you have pulse service (page 53). 1 Getting started Quick reference guide - telephone base CANCEL While in a menu, press to exit without making changes or press and hold to return to idle mode. Press and hold while the telephone is not in use to erase the displayed messages (XX Missed calls and Download fail, page 25 and page 27). CID Press to scroll down while in a menu. Press to review the caller ID log when the telephone is not in use (page 78). While entering names or numbers, press to move the cursor to the left. CELL 1 Press to make or answer a cell call (page 34). During a cell call, press to answer an incoming call when you hear a call waiting alert (page 35). Flashes quickly when there is an incoming cell call. Flashes slowly when a cell call is on hold. CELL 2 Press to transfer a call from the telephone base to a connected Bluetooth headset (page 33). Press to use a connected Bluetooth headset (page 33). Press to end a call while you are using the Bluetooth headset
(page 33). 2 DIR Press to scroll up while in a menu. Press to show directory entries when the telephone is not in use
(page 68). While entering names or numbers, press to move the cursor to the right. CELL 1/CELL 2 lights On when the telephone base is paired and connected with a Bluetooth device. Flash alternately while pairing a Bluetooth device. Softkeys (2) Press to select the menu item displayed above the key. FLASH During a call, press to answer an incoming call when you receive a call waiting alert (page 33). MUTE During a call, press to mute the microphone (page 40). While the telephone base is ringing, press to silence the ringer temporarily (page 39). HOME (Speakerphone) Press to make or answer a home call (page 32). Flashes quickly when there is an incoming home call. Flashes slowly when a home call is on hold. Getting started Quick reference guide - telephone base and handset DELETE/X Press to delete the message currently playing
(page 95). When the phone is not in use, press twice to delete all previously reviewed messages
(page 97). While entering names or numbers, press to delete a digit or a character. While reviewing the redial list, directory or caller ID history, press to delete an individual entry (pages 50, 73 and 82). While predialing, press to delete a digits (page 32).
/REPEAT Press to repeat a message or press twice to play the previous message
(page 95).
/ANS ON Press to turn the answering system on or off (page 84).
/SKIP During message playback, press to skip to the next message
(page 95).
/PLAY/STOP Press to play messages (page 95). Press to stop message playback
(page 95). PUSH TO TALK Press to display the PTT menu to begin a PTT call (page 52). Press and hold to begin a one-to-group broadcast when the handset is not in use. (page 55) 3 Getting started Quick reference guide - handset CHARGE light On when the handset is charging in the telephone base or charger. Softkeys (2) Press to select the menu item displayed above the key. While in a menu, press to select an item or save an entry or setting. CELL 1/ CELL 2 Press to make or answer a cell call (page 34). During a cell call, press to answer an incoming call when you hear a call waiting alert (page 35). Flashes quickly when there is an incoming cell call. Flashes slowly when a cell call is on hold. HOME/FLASH Press to make or answer a home call (page 32). During a home call, press to answer an incoming call when you hear a call waiting alert (page 33). Flashes quickly when there is an incoming home call or when the answering system is recording a call. Flashes slowly when a home call is on hold. 1 While reviewing a caller ID history entry, press repeatedly to add or remove 1 in front of the telephone number before dialing or saving it in a directory (page 79). Press and hold to set (page 9) or to dial your voicemail number
(page 28). TONE Press to switch to tone dialing temporarily during a call if you have pulse service (page 43). While entering names in the directory, press to toggle between upper and lower case of the letters (page 80).
/SPEAKER Press to make or answer a home or cell call using the speakerphone. Press to turn on the handset speakerphone. Press again to resume normal handset use (page 39). REDIAL/PAUSE Press repeatedly to view the last 10 numbers dialed (page 44). While entering numbers, press and hold to insert a dialing pause
(page 63). 4 Getting started Quick reference guide - handset DIR /VOLUME Press to scroll up while in menus. During a call or message playback, press to increase the listening volume (page 39 and page 96). Press to show directory entries when the telephone is not in use
(page 68). While entering names or numbers in the directory, press to move the cursor to the left (page 63). CID /VOLUME Press to scroll down while in menus. During a call or message playback, press to decrease the listening volume (page 39 and page 96). Press to show the caller ID history when the telephone is not in use (page 77). While entering names or numbers in the directory, press to move the cursor to the right (page 63). OFF/CANCEL While using menus, press to cancel an operation, back up to the previous menu, or exit the menu display. Press and hold to return to idle mode. During a call, press to hang up (page 32). Press and hold while the telephone is not in use to erase all the Missed calls (page 25) or Download fail messages (page 27). While the handset is ringing, press to silence the ringer temporarily
(page 39). QUIET # (pound key) Press repeatedly to display other dialing options when reviewing a caller ID history entry (page 79). Press and hold to enter the QUIET mode setting screen, or to deactivate QUIET mode (page 11). Press to toggle the name order when saving a caller ID log entry into directory (page 80). MUTE/DELETE During a call, press to mute the microphone (page 40). While predialing, press to delete digits (page 32). While reviewing the redial list, directory or caller ID history, press to delete an individual entry (pages 50, 73 and 82). While entering or editing a directory entry, press to erase a digit or character. While the handset is ringing, press to silence the ringer temporarily (page 39). During message or announcement playback, press to delete a message or announcement (page 96 or page 87). 5 Getting started Installation You must install and charge the handset battery before using the handset. See pages 7-8 for easy instructions. Install the telephone base close to a telephone jack and a power outlet not controlled by a wall switch. The telephone base can be placed on a flat surface or vertically mounted on the wall (page 10). For optimum range and better reception, place the telephone base in a central and open location. You may hear interference if your cellular phone is too close to the telephone base during a CELLULAR call. Make sure that your Bluetooth enabled cellular phone is within 15 feet of the telephone base in order to maintain a clear and consistent connection between your Bluetooth cell phone, telephone base and cell tower. If you subscribe to high-speed Internet service (digital subscriber line -
DSL) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack (page 7). The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters. Your product may be shipped with a protective sticker covering the handset or telephone base display - remove it before use. For customer service or product information, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Avoid placing the telephone base too close to:
Communication devices such as television sets, VCRs, or other cordless telephones. Excessive heat sources. Noise sources such as a window with traffic outside, motors, microwave ovens, refrigerators, or fluorescent lighting. Excessive dust sources such as a workshop or garage. Excessive moisture. Extremely low temperature. Mechanical vibration or shock such as on top of washing machine or work bench. 6 Getting started Telephone base installation Install the telephone base and charger as shown below. The telephone base is ready for tabletop use. If you want to change to wall mounting, see Installation options on page 9 for details. Telephone base installation Plug the large end of the telephone base power adapter into a power outlet not controlled by a wall switch. Route the power adapter cord through this slot. Raise the antenna. Plug the small end of the telephone base power adapter into the power adapter jack on the back of the telephone base. Plug one end of the telephone line cord into a telephone jack or a DSL filter. If you have DSL high-speed Internet service, a DSL filter (not included) is required. The DSL filter must be plugged into the telephone wall jack. Telephone line cord Route the telephone line cord through this slot. Plug the other end of the telephone line cord into the telephone jack on the back of the telephone base. Charger installation Plug the power adapter into an electrical outlet not controlled by a wall switch. IMPORTANT INFORMATION:
1. 2. Use only the power adapter(s) provided with this product. To obtain a replacement, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. For more detailed instructions, refer to the online Complete users manual at www.telephones.att.com/manuals. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet. 7 Getting started Battery installation and charging Once you have installed the battery, the screen indicates the battery status
(see table below). For best performance, keep the handset in the telephone base or charger when not in use. The battery is fully charged after 11 hours of continuous charging. See the table in the Technical specifications section on page 122 for battery operating times. Battery indicators Battery status Action The screen is blank or shows Place in charger and flashes. The battery has no or very little charge. The handset cannot be used. Charge without interruption (at least 30 minutes). The screen shows Low battery and flashes. The screen shows HANDSET X. Battery has enough charge to be used for a short time. Battery is charged. Charge without interruption (at least 30 minutes). To keep the battery charged, place it in the telephone base or charger when not in use. Step 1 Plug the battery connector securely into the socket inside the handset battery compartment, matching the color-coded label. Insert the supplied battery with the label THIS SIDE UP facing up as indicated. T U A H E L S R E V T C E C
I P U E D S S H T I T U A H E L S R E V T C E C
I P U E D S S H T I
. I S E R E T T A B E R U T C N U P R O N R U B T O N O D I S E L P S E L R E C R E P U O R E R N C N I I S A P E N 2 4 1 1 Y B i e n h c n e u q i r b a F i
a n h C n i e d a M
) H M
i N h A m 0 0 4 V 4
. 2
2 4 3 3 8 2 T B
2 4 3 3 8 1 T B
T N E M E S S T R E V A I
I G N N R A W
s e l i p
c o B l
k c a P y r e t t a B
. I S E L P S E L R E C R E P U O R E R N C N I I S A P E N
. I S E R E T T A B E R U T C N U P R O N R U B T O N O D 2 4 1 1 Y B i e n h c n e u q i r b a F
i a n h C n i e d a M
) H M
i N h A m 0 0 4 V 4
. 2
2 4 3 3 8 2 T B 2 4 3 3 8 1 T B
T N E M E S S T R E V A I
I G N N R A W
s e l i p
c o B l
k c a P y r e t t a B Step 2 Align the cover flat against the battery compartment, then slide it upwards until it clicks into place. CHARGE light Step 3 Charge the handset by placing it face forward in the telephone base or charger. The CHARGE light on the top of the handset is on during charging. IMPORTANT INFORMATION:
Use only the supplied rechargeable battery or replacement battery (model BT166342). To order, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. For more detailed instructions, refer to the online Complete users manual at www.telephones.att.com/manuals. If you do not use the handset for a long time, disconnect and remove the battery to prevent possible leakage. 8 Getting started Installation options Your telephone base is ready for tabletop use. If you want to mount your telephone on a wall, follow the steps below to connect the telephone base with a standard dual-stud telephone wall mounting plate. You may need a professional to install the wall mounting plate. Tabletop to wall mount installation 1. 2. 3. 4. 5. 1 4 Unplug the power adapter from the power outlet. Unplug the telephone line cord from the wall jack (or DSL filter). Press down on the tabs of the wall mount bracket as indicated to release it from tabletop orientation. Rotate the wall mount bracket down and push it into the telephone base until it clicks into place. Plug the telephone line cord (or DSL filter) into the wall jack. Plug the power adapter into a power outlet not controlled by a wall switch. Align the slots on the back of the telephone base with the studs of the wall mounting plate. Slide the telephone base down until it locks securely. Bundle the telephone line cord and power adapter cord neatly with twist ties. 2 3 5 9 Getting started Installation options Wall mount to tabletop installation To change the telephone base from the wall mount position to tabletop position, follow the steps below. 1. 2. If the telephone line cord and power adapter cord are bundled, untie them first. Push the telephone base up to remove it from wall. Unplug the telephone line cord (or DSL filter) from the wall. Unplug the power adapter from the power outlet. 3. Gently pull upward to release the wall mount bracket. Rotate the wall mount bracket up to tabletop position and push it into the telephone base until it clicks into place. 4. See Telephone base installation on page 7. 10 Bluetooth Introducing Bluetooth Your new AT&T TL96273/TL96373/TL96473/TL96323 telephone system with Bluetooth wireless technology has the following features:
Pair up to 4 Bluetooth enabled devices (cell phones or headsets) with the telephone base. Connect a maximum of 2 cell phones to make and receive cell calls. Both cell phones can be active on a call at a time respectively. Connect a Bluetooth enabled headset for making and receiving home calls. Conference any combination of cell and home call. Make and receive calls using your cell phone service with your telephone base or system handsets. IMPORTANT INFORMATION After plugging in the telephone base, wait at least 20 seconds before connecting a Bluetooth device. The screen shows Bluetooth system busy if you try to connect too soon. Refer to the user's manual of your Bluetooth enabled cell phone or headset for more information about how that device uses Bluetooth connectivity. Bluetooth wireless technology operates within a short range (up to 30 feet) from the telephone base. Keep connected cell phones and headsets within this range. If your cell phone has poor reception in your home, the TL96273/
TL96373/TL96473/TL96323 cannot improve the reception. However, if there is a location in your house with better reception, you can leave your cell phone at that location while you use the TL96273/TL96373/
TL96473/TL96323 cell line. For optimal performance, the cell phone must be within 15 feet of the telephone base. If you experience poor sound quality, it may be caused by the distance between your cell phone and the telephone base. To improve the performance, place your cell phone closer to the telephone base (within 15 feet) and make sure that there are no physical obstacles such as large furniture or thick wall in between. 15 feet 11 Cellular signal DECT 6.0 Bluetooth Introducing Bluetooth Charge your cell phone while it is connected to the telephone base. Your cell phone's battery discharges faster while it is connected to the telephone base via Bluetooth wireless technology. Monitor your cell phone's usage because minutes may be deducted from your cellular plan for the duration of all cell calls, depending on the terms of your plan. Refer to the Bluetooth setup section (pages 14-20) to learn how to set up your Bluetooth device. Refer to the Telephone operation section
(pages 32-45) on how to operate your Bluetooth devices with your new AT&T TL96273/TL96373/TL96473/TL96323 telephone system with Bluetooth wireless technology. Refer to the Troubleshooting section (pages 102-114) if you experience difficulty when using the telephone system. The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Advanced American Telephones and its parent, VTech Holdings Limited, is under license. VTech Holdings Limited is a member of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners. 12 Bluetooth Glossary of terms Below are some terms used in this users manual to help you become familiar with using your Bluetooth devices and your new AT&T telephone system. Active devices - the Device list has two active slots for two cell phones, or one cell phone and one headset. When a device in the list is active it will have a D1: or D2: in front of the device name. In order to use a Bluetooth device on a call, it must be in an active slot and be connected. Bluetooth cell phone - refers to a mobile Bluetooth enabled cellular telephone. CELLULAR line - the telephone line associated with your cell phone service. On your TL96273/TL96373/TL96473/TL96323, press CELLULAR on the handset or CELLULAR on the base to use the cell line. Connected - when you pair a Bluetooth device to the TL96273/TL96373/
TL96473/TL96323 it is placed in an active slot and automatically connected. When a device is connected, a 1 and/or 2 will display after on the handset screen and the CELL 1 and/or CELL 2 light on the telephone base will be on. If a device loses its connection to the telephone base, it must be reconnected before you can use the device with the TL96271. Device list - The list of devices connected to the telephone. Disconnected - when a device is disconnected, 1 and/or 2 displays after on the handset screen and the CELL 1 and/or CELL 2 light on the telephone base is off. Discoverable mode - before a Bluetooth enabled device can be paired, it must be set to this mode. When pairing your cell phone, the telephone base is set to this mode. Depending on the cell phone manufacturer, this mode is sometimes referred to as Find Me or Visibility. Paired devices - The Bluetooth enabled devices (cell phones or headsets) that have shared registration information with the telephone base. A total of four Bluetooth enabled devices can be paired to the telephone base. However, only two paired devices can communicate with the base at a time. Pairing - sometimes referred to as bonding. The process of sharing registration information between two Bluetooth enabled devices. Your Bluetooth enabled cell phone or headset must first be paired to the telephone base in order to use it with this telephone system. PIN - by default, the PIN is 0000 for the telephone base and for most Bluetooth devices. PIN information may be exchanged between Bluetooth devices before they can be used. This is also known as a Passkey or Passcode.
13 Bluetooth Bluetooth setup To use a Bluetooth enabled cellular phone with your telephone, you must first pair and connect your Bluetooth cellular phone with the telephone base. TheThe TL96273/TL96373/TL96473/TL96323 can then be used to make or answer calls on the cell phone line. Bluetooth wireless technology operates within a short range (up to 30 feet). When you pair a Bluetooth cell phone or Bluetooth headset to the telephone base, keep the device within 15 feet of the telephone base for optimal performance. Add a cell phone Before you begin, make sure that you have cellular coverage and your Bluetooth enabled cell phone is not connected to any other Bluetooth device. Refer to your cell phone user's manual to learn how to search for or add new Bluetooth devices. To pair and connect a cell phone:
1. 2. 3. 4. Press MENU on the telephone base in idle mode to enter the main menu. Press CID or DIR to highlight Bluetooth, then press SELECT . Press SELECT to choose Add device. Press CID or DIR to highlight Add cellular, then press SELECT. The screen displays Please wait... followed by 1. If cell is connected to BT device, please disconnect it. If there are already 4 paired devices on the device list, the 4th device on the device list will be automatically removed, regardless of whether the new device pairing is successful or not. If there are already 2 active devices on the device list with prefix D1:
or D2:, the telephone base shows Only 2 devices can be ready for connection. You are prompted to deactivate an active device. Press NEXT . The screen displays 2. Place cell phone next to base. All devices that are connected to the telephone base are disconnected until the pairing process is completed. Press NEXT to turn on the telephone base discoverable mode. The screen displays Set cell to search base: AT&T DECT 6.0 discoverable PIN: 0000. Promptly turn on the Bluetooth feature of your cell phone and search for or add new devices. 14 5. 6. Bluetooth Bluetooth setup 7. 8. 9. Your cell phone may require a passcode. In this case the telephone base displays Check cellular. ENTER PASS CODE. Enter the cell phone passcode
(typically 0000) into the telephone base and press SET to save. Enter the PIN of the telephone base (the default PIN is 0000) into your cell phone to continue the pairing process. The telephone base displays Adding Cell Phone A to device list... When a device is successfully connected, the telephone base displays Cell Phone A is added and connected to base. You hear a confirmation tone. The corresponding status icon (
device light on the telephone base (CELL 1 or CELL 2) turns on. 2) displays. The corresponding 1 or If you have trouble pairing your cell phone, it may not be compatible with your TL96273/TL96373/TL96473/TL96323. Check the Bluetooth compatibility list at www.telephones.att.com. NOTES:
The pairing process may take up to one minute. If the pairing process fails, try again. The steps for the pairing process may vary for different cell phones. If this happens, follow the prompts on your cell phone and your TL96273/TL96373/TL96473/TL96323 to complete the pairing process. Refer to the users manual of your cell phone on how to search for or add a new Bluetooth device. 15 Bluetooth Bluetooth setup Add a headset Before you begin, make sure that your Bluetooth enabled headset is not connected to any other Bluetooth device. Refer to your headset user's manual to learn how to search for or add new Bluetooth devices. To pair and connect a headset:
1. 2. 3. 4. Press MENU on the telephone base in idle mode to enter the main menu. Press CID or DIR to highlight Bluetooth, then press SELECT . Press SELECT to choose Add device. Press CID or DIR to highlight Add headset, then press SELECT . The screen displays Please wait... followed by If headset is connected to cell, please disconnect it. If there are already 4 paired devices on the device list, the 4th device on the device list will be automatically removed, regardless of whether the new device pairing is successful or not. If there is another headset already active, the screen will show Only 1 headset in device list can be ready for connection and prompts you to replace an existing paired device. If there are already 2 active devices on the device list with prefix D1: or D2:, the screen shows Only 2 devices can be ready for connection. The screen prompts you too deactivate an active device. 5. 6. 7. 8. 9. 10. Press NEXT . The screen displays Pls set headset to discoverable mode. Set your headset to discoverable mode (refer to the users manual of your headset), then press NEXT . All devices that are connected to the telephone base are temporarily disconnected. The screen displays Searching for Bluetooth headsets... When the screen displays the found devices, press CID or DIR to highlight your headset and then press SELECT . Enter the PIN of your headset. The PIN for most Bluetooth devices is 0000
(refer to the users manual of your headset). Then press NEXT . The screen displays Adding Headset A to device list... when the base is connecting to your headset. When a device is successfully connected, the telephone base displays Headset A is added and connected to base and the corresponding status 2). You hear a confirmation tone. The corresponding light on icon (
the telephone base (CELL 1 or CELL 2) turns on. 1 or If you have trouble pairing your headset, it may not be compatible with your TL96273/TL96373/TL96473/TL96323. Check the Bluetooth compatibility list at www.telephones.att.com. 16 Bluetooth Bluetooth setup 9. 10. The screen displays Adding Headset A to device list... when the base is connecting to your headset. When a device is successfully connected, the telephone base displays Headset A is added and connected to base and the corresponding status 2). You hear a confirmation tone. The corresponding light on icon (
the telephone base (CELL 1 or CELL 2) turns on. 1 or If you have trouble pairing your headset, it may not be compatible with your TL96273/TL96373/TL96473/TL96323. Check the Bluetooth compatibility list at www.telephones.att.com. NOTES:
The pairing process may take up to one minute. If the pairing process fails, try again. When a connected headset is charging, it may disconnect from the telephone base and the corresponding light on the telephone base (CELL 1 or CELL 2) turns off. For some headset models, you may need to turn on the headset and reconnect it to the telephone base again. Auto connection When an active device moves within Bluetooth range of the telephone base, or is turned on within range, the telephone base tries to connect to the device. When the device moves out of range, it is disconnected. Your device might make a connect or disconnect sound. A connected device could also be disconnected by:
Turning off the Bluetooth device. Turning off the Bluetooth feature of the device. Disconnecting through the telephone base Device list. If you disconnect through the Device list, the telephone base will not attempt to reconnect until your device is moved out of range and then moves back in range again. Bluetooth connection from idle mode When you have active devices that are not connected, CONNECT appears on the telephone base in idle mode. Press CONNECT to start connecting an active device. When there are two active devices, the screen will prompt you to choose one before connection. 17 Bluetooth Bluetooth setup Device list and connection Up to 4 devices can be paired to the telephone base. All paired devices are shown on the device list. To use a paired device, it must be in an active slot
(CELL 1 or CELL 2) on the device list and connected. Two Bluetooth cell phones can be on a call at a time. While you are on a cell line call, you can also use a Bluetooth headset to make or answer a home line call. Once you have paired a device with the telephone base, you do not need to repeat the pairing procedure again unless you delete the device from the device list. NOTE: When connecting a Bluetooth device to the device list, all connected devices will be temporarily disconnected until the procedure is complete. It may take up to 2 minutes to reconnect. Review the device list 1. 2. 3. Press MENU on the telephone base in idle mode. Press CID or DIR to highlight Bluetooth, then press SELECT . Press CID or DIR to highlight Device list, then press SELECT . Connect/disconnect an active device 3. 4. 5. While in the device list menu, you may connect or disconnect your active device. 1. 2. Press MENU on the telephone base in idle mode. Press CID or DIR to highlight Bluetooth, then press SELECT. Press CID or DIR to highlight Device list, then press SELECT . Press CID or DIR to highlight a device, then press OPTION . Press CID or DIR to highlight Connect/Disconnect
(whichever is applicable), then press SELECT . The telephone base displays Device connected/Device disconnected. You hear a confirmation tone. NOTE: When your active device is connected, you are prompted to select Disconnect. When your active device is disconnected, you are prompted to select Connect. Directory Caller ID log Intercom Bluetooth BACK SELECT BLUETOOTH Add device Device list Download dir BACK SELECT DEVICE LIST D1:Headset A D2:Cell Phone A Cell Phone B BACK OPTION HEADSET A Connect Remove Rename BACK SELECT 18 Bluetooth Bluetooth setup Download directory You can download up to 4 cell phone directories (phonebooks) to your TL96273/TL96373/TL96473/TL96323 telephone system via Bluetooth wireless technology. Each downloaded directory can store up to 1,500 entries with up to 30 digits for each phone number and 15 characters for each name. Before downloading a directory, make sure the cell phone is paired, active, and connected to your TL96273/TL96373/TL96473/TL96323. Place your cell phone next to the telephone base when you download a cell phone directory to your TL96273/TL96373/TL96473/TL96323. To download a cell phone directory:
1. 2. 3. 4. 5. Press MENU on the telephone base in idle mode. Press CID or DIR to highlight Bluetooth, then press SELECT . Press CID or DIR to highlight Download dir, then press SELECT . Press CID or DIR to highlight a device, then press SELECT . Press CID or DIR to highlight one of the following options:
Phone memory - download all contacts stored in your phone memory. SIM card only - download all contacts stored in your SIM card. Phone and SIM - download all contacts stored in both your phone memory and SIM card. Press SELECT . During the download, the telephone base displays the progress. All handsets display Downloading dir. Your cell phone may require a passcode. In this case the screen displays Check cellular. ENTER PASS CODE. Enter the cell phone passcode into the telephone base and press SET to save. Your cell phone may require you to press a key to confirm the directory download. 19 Bluetooth Bluetooth setup If the selected devices directory has already been downloaded to TL96273/TL96373/TL96473/TL96323 before, the telephone base displays the last update date of your cell phone. The directory stored on the TL96273/TL96373/TL96473/TL96323 for that cell phone will be erased and replaced with the current cell phone directory. If you have edited the downloaded entries (page 70), those changes will be lost. Press NEXT to start the download, the screen displays Erasing directory... If you already have 4 downloaded directories, the telephone base displays Memory is full. Replace existing directory? Press YES . Highlight the cell phone directory to be replaced and press SELECT . The screen displays Replace Cell Phone A directory? Press YES to confirm. 6. When the downloading process is complete, the telephone base displays Download ended XXXX entries saved. Press OK to return to the Bluetooth menu. NOTES:
With certain cell phones, downloading from the SIM card is not supported. If this is the case, try transferring the contacts from your SIM card to your cell phone memory first, then download from your cell phone memory. For more information on how to transfer contacts from your SIM card to your cell phone memory, see your cell phones users manual. If Phone memory is chosen but with no entries saved, the telephone base displays No entries found. Download from SIM only? Press YES to confirm. If SIM card only is chosen but with no entries saved, the telephone base displays No entries found. Download from Phone only? Press YES to confirm. If Phone and SIM are chosen but with no entries saved in either or both directories, the telephone base displays No entries found. Download from Phone only? Press YES to confirm. When downloading the directory from your Bluetooth enabled cell phone, some data may not transfer. For example, if you have home, mobile and work numbers for a particular contact, the three category descriptions may not transfer to your TL96273/TL96373/
TL96473/TL96323. 20 Telephone settings Handset and telephone base settings Ringer volume appears. You can select the ringer volume for incoming calls on all lines. When the ringer volume for all calls (home and cellular) is set to off, a steady ringer off icon 1. 2. Press MENU in idle mode to enter the main menu. Press CID or DIR on the handset, or press CID or DIR on the telephone base to highlight Ringers, then press SELECT . Press SELECT to choose Ringer volume. Press CID or DIR on handset, or press CID or DIR on the telephone base to sample each ringer volume for all lines. Press SET to confirm. 3. 4. 5. NOTES:
Changing the handset ringer volume does not affect base ringer volume. The ringer volume level also determines the ringer levels of intercom calls (page 63). Ringer tone You can select the ringer tones for incoming home and cell calls. 1. 2. Press MENU in idle mode to enter the main menu. Press CID or DIR on the handset, or press CID or DIR on the telephone base to highlight Ringers, then press SELECT . Press CID or DIR on the handset, or press CID or DIR on the telephone base to highlight Ringer tone, then press SELECT . Press CID or DIR on the handset, or press CID or DIR on the telephone base to highlight All lines, Home, Cell-D1 or Cell-D2, then press SELECT . Press CID or DIR on the handset, or press CID or DIR on the telephone base to sample each ringer tone. Press SET to select and save your choice. 3. 4. 5. 6. NOTE: When you turn off the ringer volume, you will not hear ringer tone samples. 21 Telephone settings Handset and telephone base settings Set date and time The answering system announces the day and time of each message prior to playing it. Before using the answering system, set the date and time as follows. If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call. The year must be set so that the day of the week can be calculated from the caller ID information. 1. 2. Press MENU in idle mode to enter the main menu. Press CID or DIR on the handset, or press CID or DIR on the telephone base to highlight Set date/time, then press SELECT . Press CID or DIR on the handset, or press CID or DIR on the telephone base to select the month, then press SET ., or enter the 2-digit number (01-12) using the dialing keys (0-9). Press CID or DIR on the handset, or press CID or DIR on the telephone base to select the day, then press SET ., or enter the 2-digit number (01-31) using the dialing keys (0-9). Press CID or DIR on the handset, or press CID or DIR on the telephone base to select the year, then press SET, or enter the 2-digit number (00-99) using the dialing keys (0-9), then press SET . Press CID or DIR on the handset, or press CID or DIR on the telephone base to select the hour, then press SET ., or enter the 2-digit number (01-12) using the dialing keys (0-9). Press CID or DIR on the handset, or press CID or DIR on the telephone base to select the minute, then press SET ., or enter the 2-digit number (00-59) using the dialing keys (0-9). Press CID or DIR on the handset, or press CID or DIR on the telephone base to highlight AM or PM, or press 2 for AM or 7 for PM. Press SET to save. You hear a confirmation tone. 3. 4. 5. 6. 7. 8. NOTE: If the date and time are not set when a message is recorded, the system announces, Time and day not set, before each message plays. 22 Telephone settings Handset and telephone base settings LCD language You can select English, Franais or Espaol to be used in all screen displays. To select a language:
1. 2. Press MENU in idle mode to enter the main menu. Press CID or DIR on the handset, or press CID or DIR on the telephone base to highlight Settings, then press SELECT . Press SELECT to choose LCD language. Press CID or DIR on the handset, or press CID or DIR on the telephone base to choose from English, Franais or Espaol, then press SET to save. 3. 4. NOTE: If you accidentally change the LCD language to French or Spanish, you can reset it back to English without going through the French or Spanish menus. Press MENU on the handset in idle mode, then enter 364#. There is a confirmation tone. 23 Telephone settings Handset and telephone base settings Voicemail (visual message waiting) number If you subscribe to voicemail service offered by your telephone service provider, 1 on each handset and the telephone you can save the voicemail number to base for easy access. When you want to retrieve voicemail messages, press and hold assistance about using your voicemail service. 1. Contact your telephone service provider for more information and or Save and dial your voicemail number:
1. 2. 1 when the phone is not in use. to move the cursor to the left or right. Press and hold Use the dialing keys to enter the voicemail access number provided by your telephone service provider (up to 30 digits) when prompted. Press Press DELETE on the handset or X/DELETE on the telephone base to delete a digit. Press and hold DELETE on the handset or X/DELETE on the telephone base to delete all digits. Press and hold PAUSE to enter a dialing pause
(a P appears). 3. Press SELECT to save. or or Save your voicemail number:
1. 2. 3. 4. to scroll to Settings, then press SELECT. to scroll to Voicemail #, then press SELECT. Press MENU when the phone is not in use. Press Press Use the dialing keys to enter the voicemail number (up to 30 digits). Press Press DELETE on the handset or X/DELETE on the telephone base to delete a digit. Press and hold DELETE on the handset or X/DELETE on the telephone base to delete all digits. Press and hold PAUSE to enter a dialing pause (a P appears). to move the cursor to the left or right. or Press SELECT to save your selection. 5. 24 Telephone settings Handset and telephone base settings Display alerts In the display alerts menu, you can change and edit the settings for display of alerts on the idle screen. Missed call indicator When there are missed calls that have not been reviewed in the caller ID log, the screens show XX Missed calls. Each time you review a caller ID log entry marked NEW, the number of missed calls decreases by one. When you have reviewed all the missed calls, the missed calls indicator goes away. If you do not want to review the missed calls one by one, you can reset the missed call indicator. All the entries are then considered old and kept in the caller ID log. To reset the missed call indicator:
1. 2. 3. 4. 5. Press MENU in idle mode to enter the main menu. Press CID or DIR on the handset, or press CID or DIR on the telephone base to highlight Settings, then press SELECT . Press CID or DIR on the handset, or press CID or DIR on the telephone base to highlight Display alerts, then press SELECT . Press CID or DIR on the handset, or press CID or DIR on the telephone base to highlight Home line or Cell line, then press SELECT . Press CID or DIR on the handset, or press CID or DIR on the telephone base to highlight Missed calls, press SELECT . The screen displays Reset missed call indication? Press YES to confirm. You can also press and hold OFF/CANCEL on the handset or CANCEL on the telephone base to erase the missed call indicator when the telephone is not in use. 25 Telephone settings Handset and telephone base settings Voicemail indicator If you subscribe to voicemail service offered by your telephone service provider, New voicemail and new voicemail messages. Contact your telephone service provider for more information and assistance about using your voicemail service. appear on the handsets when you have After you have listened to all new voicemail messages, the indicators on the handsets turn off automatically. Reset the voicemail indicators when the telephone indicates that there is new voicemail but there is none (for example, when you have accessed your voicemail while away from home). Clearing the voicemail waiting indicators only turns off the indicators; it does not delete your voicemail messages. As long as you have new voicemail messages, your telephone service provider continues to send the signal to turn on the indicators. To reset the voicemail indicator:
1. 2. 3. 4. 5. Press MENU in idle mode to enter the main menu. Press CID or DIR on the handset, or press CID or DIR on the telephone base to highlight Settings, then press SELECT . Press CID or DIR on the handset, or press CID or DIR on the telephone base to highlight Display alerts, then press SELECT . Press CID or DIR on the handset, or press CID or DIR on the telephone base to highlight Voicemail, then press SELECT . The screen displays Reset voicemail indication? Press YES to confirm. NOTES:
Your telephone service provider might alert you to new voicemail messages with a stutter (broken) dial tone. Contact your telephone service provider for more details. For more information about the difference between your answering system and voicemail, see page 93. 26 Telephone settings Handset and telephone base settings No line If there is no telephone line connected to the telephone base, the screens show No home line. If you do not want to display this message on the screens
(for example, if you use the cell line only), you can turn off the no line alert. To reset the missed call indicator:
1. 2. Press MENU in idle mode to enter the main menu. Press CID or DIR on the handset, or press CID or DIR on the telephone base to highlight Settings, then press SELECT . Press CID or DIR on the handset, or press CID or DIR on the telephone base to highlight Display alerts, then press SELECT . Press CID or DIR on the handset, or press CID or DIR on the telephone base to highlight No line, then press SELECT . Press CID or DIR on the handset, or press CID or DIR on the telephone base to choose On or Off, then press SET to save. When you choose Off the handset displays If the line is not connected, an alert will not appear. You hear a confirmation tone. 3. 4. 5. Download fail If the directory download process is interrupted, the telephone base and handset screens display Download fail. You can reset the download fail indication on the handset. To reset the voicemail indicator:
1. 2. Press MENU on the handset when it is not in use. Press CID or DIR on the handset, or press CID or DIR on the telephone base to highlight Settings, then press SELECT . Press CID or DIR on the handset, or press CID or DIR on the telephone base to highlight Display alerts, then press SELECT . Press CID or DIR on the handset, or press CID or DIR on the telephone base to highlight Cell line, then press SELECT . Press CID or DIR on the handset, or press CID or DIR on the telephone base to highlight Download fail, then press SELECT . The screen displays Reset download failure indication? Press YES to confirm. You hear a confirmation tone. 3. 4. 5. 6. You can also press and hold OFF/CANCEL on the handset or CANCEL on the telephone base to erase the download fail indicator when the telephone is not in use. 27 Telephone settings Handset and telephone base settings Key tone The telephone base and handset is set to beep with each key press. If you turn off the key tone, there are no beeps when you press keys. 1. 2. 3. 4. Press MENU in idle mode to enter the main menu. Use CID or DIR on the handset, or press CID or DIR on the telephone base to scroll to Settings, then press SELECT . Press CID or DIR on the handset, or press CID or DIR on the telephone base to scroll to Key tone, then press SELECT . Press CID or DIR on the handset, or press CID or DIR on the telephone base to select the desired volume or off. Press SET to save your preference. Dial mode The dial mode is preset to tone dialing. If you have pulse (rotary) service, you must change the dial mode to pulse dialing before using the telephone. To change the setting:
1. 2. 3. 4. Press MENU in idle mode to enter the main menu. Press CID or DIR on the handset, or press CID or DIR on the telephone base to highlight Settings, then press SELECT . Press CID or DIR on the handset, or press CID or DIR on the telephone base to highlight Dial mode, then press SELECT . Press CID or DIR on the handset, or press CID or DIR on the telephone base to choose Tone or Pulse, then press SET to save. 28 Telephone settings Handset and telephone base settings Quiet mode You can turn on quiet mode for a period of time (1-12 hours). During this period, all tones (except paging tone) and call screening are muted. When you turn on the quiet mode, the answering system turns on automatically. When the quiet mode duration expires, the answering system remains on. To set and turn the quiet mode on:
1. Press and hold QUIET# when the handset/telephone base is not in use. The screen shows Quiet: _ _ hours (1-12). Use the dialing keys to enter the desired duration (1-12), then press SELECT. All screens display Quiet mode on and telephone base turns on. To turn the quiet mode off:
While the quiet mode is on, press and hold QUIET#. The screen displays Quiet mode off briefly and then returns to idle.
/ANS ON/OFF light on the
. The 2. NOTE: When you change the settings of the ringer tone or ringer volume, you can still hear the samples even if the quiet mode is on. Caller ID announce The caller ID announce feature lets you know whos calling without having to look at the display. To change the setting:
1. Press MENU on the handset or telephone base in idle mode to enter the main menu. Press CID or DIR on the handset, or press CID or DIR on the telephone base to highlight Settings, then press SELECT . Press CID or DIR on the handset, or press CID or DIR on the telephone base to highlight Caller ID Annc, then press SELECT . Press CID or DIR on the handset, or press CID or DIR on the telephone base to choose On or Off, then press SET to save. 2. 3. 5. NOTES:
To use the caller ID announce feature, you must subscribe to caller ID service from your telephone service provider. Pronunciation of names may vary with this feature. Not all names may be pronounced correctly. 29 Telephone settings Handset and telephone base settings Home area code If you dial 7 digits to make a local call (area code not required), enter your area code into the telephone as the home area code. When you receive a call from within your home area code, the caller ID history only displays the 7 digits of the telephone number. This feature makes it easy for you to place a call from the caller ID log. If you dial 10 digits to make a local phone call, do not use this home area code feature. If you do, you cannot place local calls from your caller ID log, as they will have only 7 digits. To set the home area code:
1. 2. 3. 4. 5. Press MENU in idle mode to enter the main menu. Press CID or DIR on the handset, or press CID or DIR on the telephone base to highlight Directory, then press SELECT . Press OPTION to choose Home. Press CID or DIR on the handset, or press CID or DIR on the telephone base to highlight Home area code, then press SELECT . The screen briefly shows Only for 7 digits dialing from Caller ID log. Use the dialing keys to enter the desired home area code. Press MUTE/DELETE on the handset, or DELETE/X on the telephone base to erase a digit. Press and hold MUTE/DELETE on the handset, or DELETE/X on the telephone base to erase all digits. Press CID or DIR to move the cursor to the right or left, or press CID or DIR on the telephone base to move the cursor to the left or right. 6. Press SET to save. NOTE: If, in the future, your telephone service provider requires you to dial 10 digits to make a local call (area code + telephone number), you will need to delete your home area code. With the home area code displayed, press and hold MUTE/DELETE on the handset, or DELETE/X on the telephone base and then press SET . The home area code is now restored to its default setting of _ _ _ (empty). 30 Telephone settings Handset and telephone base settings Cell area code Most cell phone entries are stored in a 10-digit format. If all of your cell phone entries are stored this way, you do not need to program your cell area code. If your cell phone stores entries in a 7-digit format, we recommend that you program your cell area code so that your 7-digit directory entries can be dialed correctly using your home line. To set the cell area code:
1. 2. 3. 4. 5. Press MENU on the handset in idle mode to enter the main menu. Press CID or DIR on the handset, or press CID or DIR on the telephone base to highlight Directory, then press SELECT . Press CID or DIR on the handset, or press CID or DIR on the telephone base to highlight a desired downloaded directory, then press OPTION . Press SELECT to choose Cell area code. The handset displays Only for 7 digits dialing from Caller ID log. Use the dialing keys to enter the desired cell area code. Press MUTE/DELETE on the handset, or DELETE/X on the telephone base to erase a digit. Press and hold MUTE/DELETE on the handset, or DELETE/X on the telephone base to erase all digits. Press CID or DIR on the handset to move the cursor to the right or left, or press CID or DIR on the telephone base to move the cursor to the left or right. 6. Press SET to save. 31 Telephone operation Make, answer and end a call Make, answer or end a home call Using a handset:
To make a home call:
Press HOME/FLASH or /SPEAKER, then enter the telephone number. To predial a home call:
Enter the telephone number, then press HOME/FLASH or /SPEAKER. To answer a home call:
Press HOME/FLASH , CELL 1, CELL 2, /SPEAKER or any dialing key
(0-9, TONE or QUIET#). To end a home call:
Press OFF/CANCEL, or put the handset in the telephone base or charger. NOTES:
The screen shows the elapsed time as you talk (in hours, minutes and seconds). When predialing (preview numbers before dialing), press MUTE/DELETE to backspace and delete; press and hold REDIAL/PAUSE to insert a dialing pause (a p appears). You cannot answer a home call using your connected cell phone. Using the telephone base:
To make a home call:
Press HOME on the telephone base, then enter the telephone number. To predial a home call:
Enter the telephone number, then press HOME. To answer a home call:
Press HOME, CELL 1, CELL 2, or any dialing key (0-9, TONE or QUIET#). To end a home call:
Press HOME. NOTES:
The screen shows the elapsed time as you talk (in hours, minutes and seconds). When predialing (preview numbers before dialing), press DELETE/X to backspace and delete; press REDIAL/PAUSE to insert a dialing pause (a p appears). 32 Telephone operation Make, answer and end a call Using a Bluetooth headset:
You can use a Bluetooth headset for home calls. However, you need to keep the device within 15 feet of the telephone base for optimal performance. Please see the users manual of your Bluetooth headset for more information. To answer a home call using a Bluetooth headset:
Press CELL 2 on the telephone base or the call key on your headset. To end a home call:
Press CELL 2, or the call key on your headset. To transfer a call from the telephone base to a Bluetooth headset:
Press CELL 2, then press SELECT or CELL 2 again to choose the headset. The telephone base displays Transferring audio to Headset A. To transfer a call from the Bluetooth headset back to the telephone base:
Press HOME. NOTES:
If you are on a call using a Bluetooth headset, and you lose the Bluetooth connection or the battery becomes depleted, the call is lost. When you try to use a Bluetooth headset that is not connected to the base, the telephone base displays Headset not connected! Press CONNECT to connect your headset to the telephone system. Refer to Bluetooth connection from idle mode on page 17 and Connect/disconnect an active device on page 18. While using the cell line, you cannot use the Bluetooth headset. Call waiting on the home line If you subscribe to call waiting service from your telephone service provider, you hear a tone if someone calls while you are already on a call. Press HOME/FLASH on the handset, or press FLASH on the telephone base to put your current call on hold and take the new call. Press the same key at any time to switch back and forth between calls. 33 Telephone operation Make, answer and end a call Make, answer or end a cell call The TL96273/TL96373/TL96473/TL96323 can be used to make or answer calls on the cell line. You can connect a maximum of 2 Bluetooth enabled cell phones to the telephone base, and both cell phones can be used on cell calls at a time. Using a handset:
To make a cell call:
Press CELL 1 or CELL 2. Enter the telephone number, then press DIAL . To predial a cell call:
Enter the telephone number, then press CELL 1 or CELL 2. If you have only one cell phone connected to the telephone base, it is automatically selected to make cell calls. If you have two cell phones connected to the telephone base, the telephone system prompts you to select a cell phone before you make a cell call. To answer a cell call:
Press CELL 1 or CELL 2. To end a cell call:
Press OFF/CANCEL, or put the handset in the telephone base or charger. NOTES:
You can also use your cell phone to answer the call. If you do not want to answer the call, press REJECT . The screen displays Call rejected and then returns to the idle mode. When you try to make a cell call but your cell phone is not connected to the base, the handset displays No cellular is ready for connection. Press CONNECT to connect your cell phone to the telephone system. Refer to Bluetooth connection from idle mode on page 17 and Connect/disconnect an active device on page 18. 34 Telephone operation Make, answer and end a call Using the telephone base:
To make a cell call:
1. 2. To predial a cell call:
To answer or end a cell call:
Press CELLULAR. Press CELL 1 or CELL 2, then enter the telephone number. Press DIAL . Enter the telephone number, then press CELL 1 or CELL 2. NOTES:
You can also use your cell phone to answer the call. If you answer with your cell phone, it disconnects from the telephone base. If you do not want to answer the call, press REJECT . The screen displays Call rejected and then returns to the idle mode. When you try to make a cell call but your cell phone is not connected to the base, the telephone base displays Cellular phone not connected. Press CONNECT to connect your cell phone to the telephone system. Refer to Bluetooth connection from idle mode on page 17 and Connect/disconnect an active device on page 18. Call waiting on the cell line If you subscribe to call waiting service from your cell phone service provider, you hear a beep if someone calls while you are already on a call. Using a handset:
Press CELL 1 or CELL 2 on the handset to put your current call on hold and take the new call. Press CELL 1 or CELL 2 on the handset at any time to switch back and forth between calls.
-OR-
Press SWAP to switch. To switch back, press OPTION . Press CID or DIR to highlight Swap, then press SELECT . Using the telephone base:
Press SWAP on the telephone base. The original call is put on hold and you take the new call. Press OPTION on the telephone base. Press CID or DIR to highlight Swap. Press SELECT to resume the original call. The other incoming cell call is put on hold. 35 Telephone operation Make, answer and end a call Answer an incoming cell call while on a home call If you are on a home call and you receive an incoming cell call, you hear a 2 displays on the handset or telephone base you are beep and using. The telephone base and all other handsets ring. 1 or To answer the incoming cell call:
Using a handset:
Press CELL 1 or CELL 2 on the handset. The home call is automatically placed on hold, all other handsets and the telephone base display Home call on hold and Cell line in use alternately. Using the telephone base:
Press CELL 1 or CELL 2 on the telephone base. The home call is automatically placed on hold and all other handsets display Home call on hold and Cell line in use alternately. To end the cell call:
Using a handset:
Press OFF/CANCEL on the handset. The home line is still on hold. The telephone base and all other handsets all handsets and the telephone base display Home call on hold. Using the telephone base:
Press CELL 1 or CELL 2 on the telephone base. The home line is still on hold. All handsets display Home call on hold. To resume the home call on hold:
Using a handset:
Press HOME/FLASH on the handset off hold. Using the telephone base:
Press HOME on the telephone base. NOTE: If you have voicemail service active on your cell phone, and you do not answer the incoming cell call, the call is answered by your cell phones voicemail. Contact your cell phone service provider for more information about voicemail service. 36 Telephone operation Make, answer and end a call Answer a home call while on a cell call If you are on a cell call and you receive an incoming home call, you hear a beep and displays on the handset or telephone base you are using. The telephone base and all other handsets ring. To answer the incoming home call:
Using a handset:
Press HOME/FLASH on the handset. The cell call is automatically placed on hold and all other handsets display Cell call on hold and Home line in use alternately. Using the telephone base:
Press HOME on the telephone base. The cell call is automatically placed on hold. All handsets display Cell call on hold and Home line in use alternately. To end the home call:
Using a handset:
Press OFF/CANCEL on the handset. The cell line is still on hold. The telephone base and all handsets display Cell call on hold. Using the telephone base:
Press CELL 1 or CELL 2 on the telephone base. The cell line is still on hold. The telephone base and all handsets display Cell call on hold. To resume the cell call on hold:
Using a handset:
Press CELL 1 or CELL 2 on the handset. Using the telephone base:
Press CELL 1 or CELL 2 on the telephone base. NOTE: If you have turned on your answering system and you do not answer the incoming home call, the call is answered by your answering system. 37 Telephone operation Conference calls Conference home and cell calls When you have calls established on the home and cell lines, you can create a 3-way conference. To conference both home and cell calls:
1. 2. 3. Press OPTION on the handset or telephone base. Press CID or DIR to highlight Conference. Press SELECT . The conferencing devices screen displays Lines now in conference. To select an option while on a conference call:
1. 2. Press OPTION on the handset or telephone base. Press CID or DIR to highlight one of the following options:
End Home line End Cell line End Conference Directory Caller ID log Press SELECT . 3. To end a conference call:
Press OFF/CANCEL or put the handset back in the telephone base or charger.
-OR-
Press OPTION on the handset or telephone base. Then press CID or DIR on the handset or telephone base to highlight End Conference. Press SELECT to end the conference. Using the home and cell lines together:
You can be on two different calls at the same time using the cell line and home line and two handsets. You cannot be on a call using the cell line and a Bluetooth headset via the home line at the same time. These are both Bluetooth devices and only one can be used at a time. If you are on a call using the cell line, you cannot join the call using your paired cell phone. However, you can join the call using another TL96273/
TL96373/TL96473/TL96323 device. Your cell phone is being used for the phone call so only features that are normally available during a call can be used. 38 Telephone operation Options while on calls Speakerphone Using a handset:
During a call, press /SPEAKER on the handset to switch between the speakerphone and normal handset use. Using the telephone base:
The speakerphone is the only audio option for the telephone base. Press HOME, CELL 1 or CELL 2 to place, answer, and to end calls from the telephone base. Volume control While on a call, you can adjust the listening volume on the handset or telephone base. If it is a cell call and the volume is too loud, too quiet or drops out, try changing the volume on your cell phone. On some cell phones, changing the volume on the cell phone affects your cell call volume on the TL96273/
TL96373/TL96473/TL96323 handsets or telephone base. To adjust the listening volume of a handset:
To adjust the listening volume of the telephone base:
Press NOTE: The handset earpiece volume setting (1-6) and speakerphone volume setting (1-6) are independent. The speakerphone volume setting of the telephone base (1-8) is also independent. on the telephone base while on a call. on the handset while on a call. VOLUME VOLUME Press Silencing the ringer When the telephone is ringing, you can temporarily silence the ringer of the handset or telephone base without disconnecting the call. The next call rings normally at the preset volume. To silence the handset ringer:
Press SILENCE , OFF/CANCEL or MUTE/DELETE on the handset and Ringer muted appears. To silence the base ringer:
Press SILENCE .
-OR-
Press MUTE. The telephone base displays Ringer muted. 39 Telephone operation Options while on calls Mute Use the mute function to turn off the microphone. You can hear the caller, but the caller cannot hear you. To mute a call:
While on a call, press MUTE/DELETE on the handset, or press MUTE on the telephone base. When mute is on, the handset and telephone base show Microphone off for a few seconds and the MUTE icon appears until the mute function is turned off. To take a call off mute:
Press MUTE/DELETE on the handset, or press MUTE on the telephone base and resume speaking. When mute is off, Microphone on appears temporarily on the handset and telephone base. Mute is automatically canceled when you end the call. 40 Telephone operation Options while on calls Hold You can place any call on hold. You hear an alert tone at the telephone base if you have not taken the call off of hold after 14 minutes. You hear another alert tone at the telephone base 30 seconds later. At 15 minutes on hold, the call on hold automatically disconnects. To place a home call on hold:
Press HOLD on the handset or telephone base. Home call on hold appears on the handsets and telephone base. HOME/FLASH flashes on the handsets and HOME flashes on the telephone base. Press HOME/FLASH on handsets or HOME on the telephone base. To resume a home call on hold:
To place a cell call on hold:
Press HOLD on the handset or telephone base. Cell call on hold appears on the handsets and telephone base. CELL 1 or CELL 2 on the handsets and on the telephone base flash. To resume a cell call on hold:
Press CELL 1 or CELL 2 on the handset or telephone base. Equalizer The equalizer feature on the handset enables you to change the quality of the handset audio to best suit your hearing. While on a call, or listening to a message or announcement, press EQ to select the equalizer setting Treble 1, Treble 2, Bass or Natural (the default setting) for the handset. The current setting shows on the handset for 2 seconds. 1. 2. Press OPTION on the handset or telephone base. Press CID or DIR on the handset or telephone base to highlight Equalizer, then press SELECT . Press CID or DIR to on the handset or telephone base highlight the desired option, then press SAVE . 3. NOTES:
The equalizer feature does not apply to the connected Bluetooth headset. If you switch the call between the handset and speakerphone by pressing /SPEAKER, the audio setting remains unchanged. The current equalizer setting remains unchanged until you select a new setting. 41 Telephone operation Options while on calls Chain dialing Use this feature to initiate a dialing sequence from numbers stored in the directory, caller ID log or redial list while you are on a call. Chain dialing can be useful if you wish to access other numbers (such as bank account numbers or access codes) from the directory, caller ID log or redial list. To access a number in the directory while on a call:
Using a handset:
Press OPTION . 1. Press CID or DIR to highlight Directory, then press SELECT . 2. Press CID or DIR to highlight the desired directory, then press REVIEW . 3. Press CID or DIR to highlight to the desired entry or perform an 4. alphabetical search (page 68). Press DIAL to dial the displayed number. 5. Using the telephone base:
1. 2. 3. 4. Press OPTION . Press CID or DIR to highlight Directory, then press SELECT . Press CID or DIR to highlight the desired directory, then press REVIEW . Press CID or DIR to highlight to the desired entry or perform an alphabetical search (page 68). Press DIAL to dial the displayed number. 5. 42 Telephone operation Options while on calls To access a number in the caller ID log while on a call:
Using a handset:
Press OPTION . 1. Press CID or DIR to highlight Caller ID log, then press SELECT . 2. Press CID or DIR to highlight the desired directory, then press REVIEW . 3. Press CID or DIR to scroll to the desired entry. 4. Press DIAL to dial the displayed number. 5. Using the telephone base:
1. 2. 3. 4. 5. Press OPTION . Press CID or DIR to highlight Caller ID log, then press SELECT . Press CID or DIR to highlight the desired directory, then press REVIEW . Press CID or DIR to scroll to the desired entry. Press DIAL to dial the displayed number. To access the redial list while on a call:
Using a handset:
1. 2. 3. Press REDIAL/PAUSE. Press CID , DIR, or REDIAL/PAUSE until the desired number displays. Press DIAL to dial the displayed number. Using the telephone base:
1. 2. 3. Press REDIAL/PAUSE. Press CID, DIR, or REDIAL/PAUSE until the desired number displays, Press DIAL to dial the displayed number. NOTES:
You can only view the numbers in the directory, caller ID log or redial list move to front and cannot edit, delete or save entries. You cannot copy a caller ID log entry into the directory while on a call. For more details about the caller ID log, see page 93. Press BACK or base to exit the redial list, directory or caller ID log while on a call. OFF/CANCEL on the handset, or BACK or CANCEL on the telephone 43 Telephone operation Redial The telephone base and each handset store the last 10 dialed numbers (up to 30 digits each) in the redial list. The redial entries of each handset and the telephone base are independent. To dial a redial entry on a handset:
1. Press HOME/FLASH, or /SPEAKER to use the home line, or CELL 1 or CELL 2 to use the cell line. Then press REDIAL/PAUSE to enter the redial list. Press CID , DIR or REDIAL/PAUSE repeatedly to browse until the desired number displays. The handset beeps twice at the end of the list. Press DIAL to dial the number displayed. 2. 3. You can also select a redial entry before dialing. 1. 2. Press REDIAL/PAUSE in idle mode. Press CID , DIR or REDIAL/PAUSE repeatedly to browse until the desired number displays. The handset beeps twice at the end of the list. Press HOME/FLASH, or /SPEAKER to use the home line, or 3. CELL 1 or CELL 2 to use the cell line. To dial a redial entry on the telephone base:
1. Press HOME to use the home line, or CELL 1 or CELL 2 to use the cell line. Then press REDIAL/PAUSE to 2. enter the redial list. Press CID, DIR or REDIAL/PAUSE repeatedly to browse and then press DIAL to dial the number displayed. You can also select a redial entry before dialing. 1. 2. Press REDIAL in idle mode. Press CID , DIR or REDIAL/PAUSE repeatedly to browse until the desired number displays. The telephone base beeps twice at the end of the list. Press HOME to dial using the home line, or CELL 1 or CELL 2 to dial using the cell line. 3. 44 Telephone operation Handset locator This feature helps you find a misplaced handset. To start paging:
Press /HANDSET LOCATOR on the telephone base when it is not in use. All idle handsets ring and display ** Paging **. To end paging:
Press /HANDSET LOCATOR on the telephone base.
-OR-
Press HOME/FLASH, /SPEAKER, CELL 1 or CELL 2, PUSH TO TALK, REDIAL/PAUSE, MUTE/DELETE or any dialing key (0-9, TONE or QUIET#) on the handset. NOTES:
If the handset ringer volume is set to off, the handset still rings when paged. While the telephone base is paging, you may press MUTE/DELETE, SILENCE on the handset to mute the paging tone. If there is no response after 60 seconds, paging ends. OFF/CANCEL or Join a call in progress Another handset can join you on an outside call. That call continues until all people hang up. You can share an outside call with telephone base and up to 4 system handsets. Using a handset:
Press HOME/FLASH or /SPEAKER on another handset to join the call. Using the telephone base:
Press HOME on telephone base to join the call. 45 Multiple handset Intercom Use the intercom feature for conversations between two handsets, or a handset and the telephone base. You can buy additional expansion handsets (AT&T model TL90071, sold separately) for this telephone system. You can register up to 12 handsets to the telephone base. Initiate an intercom call Using a handset:
1. 2. Press MENU on the handset in idle mode. Press CID or DIR to highlight Intercom, then press SELECT . Your handset displays INTERCOM and a list of devices. Press CID or DIR to highlight a destination device and then press SELECT . Your handset displays Calling HANDSET X, Calling BASE 0 or Calling all devices .
-OR-
Press 0 for BASE 0, 1-9 for handset 1-9, TONE and 0 for handset 10, TONE and 1 for handset 11, or TONE and 2 for handset 12. Your handset displays Calling HANDSET X or Calling BASE 0, or Calling all devices The other device rings and displays HANDSET X is calling.
-OR-
Press TONE and then # (pound key) to call all devices. The destination device(s) rings and displays HANDSET X is calling, or HANDSET X is calling all. 46 Multiple handset Intercom Using the telephone base:
1. Press MENU on the telephone base in idle mode. 2. Press CID or DIR to highlight Intercom, then press SELECT . The telephone base displays INTERCOM and a list of registered handsets. Press CID or DIR to highlight a destination handset or All handsets, and then press SELECT .
-OR-
Press 1-9 for handset 1-9, TONE and 0 for handset 10, TONE and 1 for handset 11, or TONE and 2 for handset 12.
-OR-
Press TONE and then # (pound key) to call all handsets. The telephone base displays Calling HANDSET X, or Calling all handsets. The destination handset(s) rings and displays BASE 0 is calling. To answer an intercom call at the destination device:
Press HOME/FLASH or /SPEAKER on the destination handset, or press HOME on the telephone base. Both screens show Intercom. To silence an intercom call:
Press OFF/CANCEL, MUTE/DELETE or SILENCE on the destination handset, or press MUTE or SILENCE on the telephone base. The screen displays Ringer muted for a few seconds. To mute while on an intercom call:
Press MUTE/DELETE on the handset, or MUTE on the telephone base. The screen displays Microphone off for a few seconds. 47 Multiple handset Intercom To end an intercom call at the destination handset:
Press OFF/CANCEL, END or place either handset back in the telephone base or charger. Both screens display Intercom ended. To end an intercom call at the telephone base:
Press END or CANCEL. Both screens display Intercom ended. NOTES:
You can cancel the intercom call before it is answered by pressing CANCEL or END on the telephone base, or pressing If you are calling all devices, only the first handset to pick up can answer the intercom call. If the destination device does not answer the intercom call within 100 seconds, is in the directory or caller ID log, or is out of range, the initiating device displays No answer. Try again. OFF/CANCEL or END on your originating handset. 48 Multiple handset Intercom Answer an incoming call during an intercom call When you receive an incoming home call during an intercom call, the two handsets on the intercom call hear an alert tone, and their screens display Home Incoming call and then the caller ID. The telephone base and all other handsets ring. To answer a home call during an intercom call:
Using a handset:
Press HOME/FLASH to answer the home call. The intercom call ends automatically. Press OFF/CANCEL to end the intercom call without answering the incoming call. The telephone continues to ring. Using the telephone base:
Press HOME to answer the home call and the intercom call ends automatically. Press CANCEL to end the intercom call without answering the incoming call. The telephone continues to ring. To answer a cell call during an intercom call:
When you receive an incoming cell call during an intercom call, the two handsets on the intercom call hear an alert tone, and their screens display Cell Incoming call and then the caller ID. The telephone base rings and all other handsets ring. Using a handset:
Press CELLULAR to answer the cell call and the intercom call ends automatically. Press OFF/CANCEL to end the intercom call without answering the incoming call. The telephone continues to ring. Using the telephone base:
Press CELLULAR to answer the cell call. The intercom call ends automatically. Press CANCEL to end the intercom call without answering the incoming call. The telephone continues to ring. 49 Multiple handset Call transfer using intercom Use the intercom feature to transfer an outside call to another system handset or the telephone base. To transfer an outside call:
Using a handset:
1. 2. When on an outside call, press OPTION . Press CID or DIR to highlight Intercom, then press SELECT . Your handset displays INTERCOM plus a list of devices. Press CID or DIR to highlight a destination device and then press SELECT .
-OR-
Press 0 for BASE 0, 1-9 for handset 1-9, TONE and 0 for handset 10, TONE and 1 for handset 11, or TONE and 2 for handset 12.
-OR-
Press TONE and then # (pound key) to call all devices. 3. 4. The call is automatically put on hold. Your handset displays Calling HANDSET X, Calling BASE 0 or Calling all. The destination device rings and displays HANDSET X is calling, or HANDSET X is calling all. To answer the call on the other device, press HOME/FLASH or
/SPEAKER on the handset, or press HOME on the telephone base. The outside call is still on hold and both devices now show Intercom. From this intercom call, you have the following options:
You can transfer the call. Press OPTION and then press SELECT to select Transfer on the calling handset. Your screen shows Call transferred. The other device automatically connects to the outside call. You can let the other device join you on the outside call in a 3-way conversation. Press OPTION , highlight Share call, and press SELECT . You can end the intercom call and continue the outside call with your handset. Press HOME/FLASH or CELLULAR on your handset. You can press OFF/CANCEL or END to hang up the intercom call
(the outside call will automatically go off hold and reconnect with your handset). NOTES:
If you want to cancel an intercom call and reconnect to the outside call before the destination handset answers, press OFF/CANCEL or END on the originating handset. If the other handset does not answer the intercom call within 100 seconds, or if the other handset is in the directory or caller ID log, or is out of range, the calling handset shows No answer. Try again. and returns to the outside call. 50 Multiple handset Call transfer using intercom Using the telephone base:
1. 2. When on an outside call, press OPTION . Press CID or DIR to highlight Intercom, then press SELECT . Your screen displays INTERCOM plus a list of handsets. Press CID or DIR to highlight a destination handset or All handsets and then press SELECT .
-OR-
Press 1-9 for handset 1-9, TONE and 0 for handset 10, TONE and 1 for handset 11, or TONE and 2 for handset 12.
-OR-
Press TONE and then # (pound key) to call all handsets. The call is automatically put on hold. The telephone base displays Calling HANDSET X or Calling all handsets. The destination handset(s) rings and displays BASE 0 is calling. 3. 4. To answer the call on any destination handset, press HOME/FLASH. The outside call is still on hold while both the handset and the telephone base now show Intercom. You can now have a private conversation between the handset and the telephone base. From this intercom call, you have the following options:
You can transfer the call. Press OPTION and then SELECT to select Transfer on the telephone base. The telephone base displays Call transferred. The destination handset automatically connects to the outside call. You can let the handset join you on the outside call in a 3-way conversation. Press OPTION ., highlight Share call, and press SELECT . You can end the intercom call and continue the outside call on the telephone base. Press CANCEL or END on the telephone base. The destination handset displays Intercom ended. You can press CANCEL or END to hang up the intercom call (the outside call will automatically go off hold and reconnect with your telephone base). NOTES:
To cancel the transfer and return to the external call before the intercom call is answered, press CANCEL on the telephone base. If the other handset does not answer the intercom call within 100 seconds, or if the other handset is in the directory or caller ID log, or is out of range, the calling handset shows No answer. Try again. and returns to the outside call. 51 Multiple handset Push-to-talk (PTT) You can directly broadcast messages from one handset or telephone base to the speakerphone of one or a group of other devices. Any handset called can respond by pressing PUSH TO TALK or PTT on the telephone base to begin a 2-way communication. Only one handset can talk at a time. To do so, press and hold the PUSH TO TALK button. You must release PUSH TO TALK, so the other person can respond. Only one PTT can be active at a time. While PTT is in use between handsets or telephone base, other handsets cannot use the intercom feature but can access the answering system. When you attempt to place a PTT call to another handset which is accessing the answering system, your handset displays Not available at this time. PTT on/off You can turn PTT on or off on each device. When on, the handset can begin and receive PTT calls. When off, the handset can begin PTT calls but will not receive PTT calls from other handsets. The idle handset displays No Incoming PTT. When you attempt to place a PTT call to another handset that has the PTT feature turned off, your handset displays Not available at this time. To turn PTT on or off:
Using a handset:
1. 2. 3. Press PUSH TO TALK when the handset is not in use. The PUSH TO TALK menu displays. Press CID or DIR to highlight PTT On/Off, then press SELECT . Press CID or DIR to highlight On or Off, then press SELECT to save. You hear a confirmation tone. 52 Multiple handset Push-to-talk (PTT) Using the telephone base:
1. 2. 3. Press PTT when the telephone base is not in use. The PUSH TO TALK menu displays. Press CID or DIR to highlight PTT On/Off, then press SELECT . Press CID or DIR to highlight On or Off, then press SELECT to save. You hear a confirmation tone. PTT to a single device Using a handset:
1. To begin a PTT call to a single device:
Press PUSH TO TALK when the handset is not in use. Use the dialing keys to enter a device number (0 for telephone base, 1-9 for handsets 1-9, TONE and 0 for handset 10, TONE and 1 for handset 11, or TONE and 2 for handset 12) to create the push-to-talk session.
-OR-
Press PUSH TO TALK when the handset is not in use. Then press CID or DIR to scroll to the desired handset or the telephone base. Press SELECT or PUSH TO TALK to create the push-to-talk session. 2. 3. 4. Your handset displays Connecting to HANDSET X... or Connecting to BASE 0... for a few seconds. When the connection is made, both yours and the destination handsets display Press and hold [PTT] to talk and beep once. Press and hold PUSH TO TALK on your handset. A chirp indicates your microphone is on. Speak towards the handset. Your voice is broadcast to the destination handset. While you are speaking, the handset displays PTT To HANDSET X (X represents the destination handset number) or PTT To BASE 0. Release PUSH TO TALK after speaking. Both handsets beep once again. After the handsets beep, you can press and hold PUSH TO TALK to continue speaking or the destination device can respond (see Answer a PTT call on page 57). 53 Multiple handset Push-to-talk (PTT) 2. To end the PTT call, press OFF/CANCEL or END . The handset displays Push to talk Ended for a few seconds.
-OR-
Place the handset in the telephone base or charger to end the PTT call. NOTE: After PUSH TO TALK is released, the PTT call remains open for a short time. If no one presses PUSH TO TALK within 10 seconds, the PTT call ends automatically. Using the telephone base:
1. To begin a PTT call to a single device:
Press PTT when the telephone base is not in use. Use the dialing keys to enter a handset number (1-9 for handsets 1-9, TONE and 0 for handset 10, TONE and 1 for handset 11, or TONE and 2 for handset 12) to create the push-to-talk session.
-OR-
Press PTT when the telephone base is not in use. Then press CID or DIR to scroll to the desired handset. Press SELECT or PTT to create the push-to-talk session. 2. 3. 4. 5. The telephone base displays Connecting to HANDSET X... for a few seconds. When the connection is made, both screens display Press and hold [PTT] to talk and beep once. Press and hold PTT on the telephone base. A chirp indicates your microphone is on. Speak towards the MIC. Your voice is broadcast to the destination handset. While you are speaking, the telephone base displays PTT To HANDSET X (X represents the destination handset number). Release PUSH TO TALK after speaking. The telephone base and the destination handset beep once again. After the handset beeps, you can press and hold PUSH TO TALK to continue speaking or the destination handset can respond (see Answer a PTT call on page 57). To end the PTT call, press CANCEL or END . The telephone base displays Push to talk Ended for a few seconds. NOTE: After PTT is released, the PTT call remains open for a short time. If no one presses PTT within 10 seconds, the PTT call ends automatically. 54 Multiple handset Push-to-talk (PTT) PTT to a group of devices When there are multiple handsets registered to the phone system, PTT supports one-to-group calls. PTT supports a maximum of one-to-four calls when two to five handsets are registered, and a maximum of one-to-three calls when six or more handsets are registered. The first three or four registered handsets and the telephone base will be eligible to use this feature. Other handsets can only use PTT for one-to-one calls. Using a handset:
1. To begin a PTT call to a group of devices:
Press and hold PUSH TO TALK when the handset is not in use.
-OR-
Press PUSH TO TALK when the handset is not in use, then press TONE and # (pound key).
-OR-
Press PUSH TO TALK when the handset is not in use. Press CID or DIR to highlight Group, then press SELECT or PUSH TO TALK. Your handset displays Connecting to group... for a few seconds. When the connection is made, both your and the destination devices display Press and hold [PTT] to talk and beep once. Press and hold PUSH TO TALK on your handset. A chirp indicates your microphone is on. Speak towards the handset. Your voice is broadcast to the destination devices. While you are speaking, the handset displays PTT To base & handset X (X represents the destination device numbers). Release PUSH TO TALK after speaking. All eligible devices beep once again. After the handsets beeps, you can press and hold PUSH TO TALK to continue speaking or the destination devices can respond (see Answer a PTT call on page 57). Press OFF/CANCEL or END to end the PTT call. The handset displays Push to talk Ended for a few seconds. 2. 3. 4.
-OR-
Place the handset in the telephone base or charger to end the PTT call. NOTE: After PUSH TO TALK is released, the PTT call remains open for a short time. If no one presses PUSH TO TALK within 10 seconds, the PTT call ends automatically. 55 Multiple handset Push-to-talk (PTT) Using the telephone base:
1. To begin a PTT call to a group of devices:
Press and hold PTT when the telephone base is not in use.
-OR-
Press PTT when the telephone base is not in use, then press TONE and # (pound key).
-OR-
Press PTT when the telephone base is not in use. Press CID or DIR to highlight Group, then press SELECT or PTT. Your screen displays Connecting to group... for a few seconds. When the connection is made, both screens display Press and hold [PTT] to talk and beep once. Press and hold PTT on the telephone base. A chirp indicates your microphone is on. Speak towards the microphone. Your voice is broadcast to the destination handsets. While you are speaking, the screen displays PTT To handset X (X represents the destination handset numbers). Release PTT after speaking. All eligible handsets beep once again. After the telephone base beeps, you can press and hold PTT to continue speaking or the destination handsets can respond (see Answer a PTT call on page 57). Press CANCEL or END to end the PTT call. The telephone base displays Push to talk Ended for a few seconds. 2. 3. 4. NOTE: After PTT is released, the PTT call remains open for a short time. If no one presses PTT within 10 seconds, the PTT call ends automatically. 56 Multiple handset Push-to-talk (PTT) Answer a PTT call You can respond to a PTT call whenever the speakerphone light is off, as described below. Using a handset:
When your handset receives a PTT call, the handset beeps, and you hear the other callers voice. The speakerphone light is on, and the handset displays PTT From BASE 0 To handset: Y or PTT From HANDSET X To handset: Y
(X represents the initiating handset number and Y represents your handset number and other destination device numbers if any; a maximum of 4 device numbers appear). When the caller finishes, the handset beeps and displays Press and hold [PTT]
to talk, and the speakerphone light turns off. Press and hold PUSH TO TALK on your handset. When you hear a chirp, speak towards the handset. While you are speaking, your handset displays PTT To BASE 0 or PTT To HANDSET X, or PTT To base & handset: X. Your voice is broadcast to all destination devices. The speakerphone light is off. Release PUSH TO TALK when you finish speaking. Your handset beeps. After the beep, if your speakerphone light is off, you can press and hold PUSH TO TALK to continue speaking or the destination devices can respond. 57 Multiple handset Push-to-talk (PTT) Using the telephone base:
When the telephone base receives a PTT call, the telephone base beeps, and you hear the other callers voice, the speakerphone light is on, and the telephone base displays PTT From HANDSET X To Base 0 or PTT From HANDSET X To base & HS: Y (X represents the initiating handset number and Y represents other handset numbers; a maximum of 4 handset numbers appear). When the caller finishes, the telephone base beeps and displays Press and hold [PTT] to talk, and the speakerphone light is off. Press and hold PTT on the telephone base. When you hear a chirp, speak towards the handset. While you are speaking, the telephone base displays PTT To HANDSET X. Your voice is broadcast to all destination handsets. The speakerphone light is off. Release PTT when you finish speaking. The telephone base beeps. After the beep, you can press and hold PTT to continue speaking or the destination handsets can respond. 58 Multiple handset Push-to-talk (PTT) Change a one-to-one PTT call to an intercom call You can convert a one-to-one PTT conversation to an intercom call. Using a handset:
1. When your handset displays Press and hold [PTT] to talk, press INTCOM . Your handset displays Switch to Intercom? Press SELECT to confirm. Your handset then displays Calling HANDSET Y (Y represents the destination handset number) or Calling BASE 0. The destination handset temporarily displays Push to talk Ended and then HANDSET X is calling (X represents the originating handset number). 2. 3. On the destination device, press HOME/FLASH or /SPEAKER on the handset or HOME on the telephone base to answer the intercom call. Both devices now display Intercom. To end the intercom call, press OFF/CANCEL, END or place the handset in the telephone base or charger. Both devices display Intercom ended. Using the telephone base:
1. When the telephone base displays Press and hold [PTT] to talk, press INTCOM . The telephone base displays Switch to Intercom? Press SELECT . The telephone base then displays Calling HANDSET Y
(Y represents the destination handset number). The destination handset temporarily displays Push to talk Ended and then BASE 0 is calling. 2. 3. On the destination handset, press HOME/FLASH or /SPEAKER to answer the intercom call. Both screens now display Intercom. To end the intercom call, press CANCEL or END on the telephone base. Both screens display Intercom ended. 59 Multiple handset Push-to-talk (PTT) End or leave a PTT call For a one-to-one PTT call, both the originating and destination devices can end the PTT call. For one-to-group PTT calls, the initiating devices can end the PTT call for the group of devices on that PTT call. If any one of the destination devices leaves the PTT call, the call continues until all participants or the initiator hangs up. To end or leave PTT:
Using a handset:
Press OFF/CANCEL, END or place the handset in the telephone base or charger. The handset displays Push to talk Ended. After PUSH TO TALK is released, the PTT call remains open for a short time. If no one presses PUSH TO TALK within 10 seconds, the PTT call ends automatically. NOTES: After PUSH TO TALK is released, the PTT call remains open for a short time. If no one presses PUSH TO TALK within 10 seconds, the PTT call ends automatically. Using the telephone base:
Press CANCEL or END . The telephone base displays Push to talk Ended. 60 Multiple handset Push-to-talk (PTT) Answer an incoming call during PTT When you receive an incoming outside call during PTT, there is a call waiting tone. The caller ID displays alternately with the PTT screen. During a one-to-one PTT call, press HOME/FLASH or CELLULAR on your originating or destination handset, or press HOME or CELLULAR on the telephone base. The PTT call ends automatically and the outside call is answered. During a one-to-group PTT call, press HOME/FLASH or CELLULAR on the originating handset, or press HOME or CELLULAR on the originating telephone base. The PTT call ends automatically and the outside call is answered. During a one-to-group PTT call, press HOME/FLASH or CELLULAR on any one of the destination handsets, or press HOME or CELLULAR on the destination telephone base. That handset or telephone base answers the outside call. The PTT call continues for the rest of the PTT participants. To leave the PTT call without answering the incoming call, press OFF/CANCEL on the handset, or press CANCEL on the telephone base. The telephone continues to ring. Make an outgoing call during PTT During a one-to-one PTT call, press HOME/FLASH or CELLULAR on the handset, or press HOME or CELLULAR on the telephone base to get a dial tone. The PTT call ends automatically. During a one-to-group PTT call, press HOME/FLASH or CELLULAR on the originating handset, or press HOME or CELLULAR on the originating telephone base. The PTT call ends automatically and you get a dial tone. During a one-to-group PTT call, press HOME/FLASH or CELLULAR on any one of the destination devices, or press HOME or CELLULAR on the destination telephone base. That device gets a dial tone. The PTT call continues for the rest of the PTT participants. 61 Directory About the directory The home directory stores up to 200 entries with up to 30 digits for each phone number and 15 characters for each name. Each of the downloaded directories stores up to 1,500 entries with up to 30 digits for each phone number and 15 characters for each name. Directory entries are stored at the telephone base and shared by all system handsets. Any changes made on one device apply to all. Only one device can review the directory at a time. If another device tries to enter the directory, its screen shows Not available at this time. When there are no records in the directory, the screen shows Directory empty. When the directory is full and you try to save an entry, the screen shows Directory full. When you try to save a number already stored in the directory, the screen shows Already saved. All of the instructions on pages 63-80 for the directories apply to the home directory and all downloaded directories. Creating a new entry on page 63 only applies to the home directory. You cannot create new entries in your downloaded directories with a TL96273/TL96373/TL96473/TL96323 handset or telephone base. Entries must be downloaded from your cell phone (see Download directory on pages 19-20). 62 Directory Create and review entries Create a new entry in the home directory Using a handset:
1. 2. 3. 4. Press MENU on the handset in idle mode to enter the main menu. Press CID or DIR to highlight Directory, then press SELECT . Press OPTION to select Home. Press SELECT to choose Add contact. The screen displays ENTER NUMBER. Use the dialing keys to enter a telephone number.
-OR-
Copy a number from the redial list. Press MUTE/DELETE to erase a digit. Press and hold MUTE/DELETE to erase all digits. Press CID or DIR to move the cursor to the right or left. Press and hold REDIAL/PAUSE to insert a dialing pause (a p appears). Press REDIAL/PAUSE and then CID , DIR or REDIAL/PAUSE repeatedly to browse for a number. Press INSERT to copy the displayed number. Home Cell Work Other Press NEXT . Press CID or DIR to highlight one of the following types:
Press NEXT . The screen displays ENTER NAME. Use the dialing keys (see page 65) to enter the name. Press SAVE to confirm and the screen shows Saved. You hear a confirmation tone. Press MUTE/DELETE to erase a character. Press and hold MUTE/DELETE to erase all characters. Press CID or DIR to move the cursor to the right or left. NOTE: You cannot create new entries in your downloaded directories from your TL96273/
TL96373/TL96473/TL96323 handsets. Entries must be downloaded from your cell phone
(see Download directory on pages 19-20). 63 5. 6. 7. 8. 9. 10. Directory Create and review entries Using the telephone base:
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Press MENU on the telephone base in idle mode to enter the main menu. Press CID or DIR to highlight Directory, then press SELECT . Press OPTION to select Home. Press SELECT to choose Add contact. The screen displays ENTER NUMBER. Use the dialing keys to enter a telephone number.
-OR-
Copy a number from the redial list. Press DELETE/X to erase a digit. Press and hold DELETE/X to erase all digits. Press CID or DIR to move the cursor to the right or left. Press and hold REDIAL/PAUSE to insert a dialing pause (a p appears). Press REDIAL/PAUSE and then CID, DIR or REDIAL/PAUSE repeatedly to browse for a number. Press INSERT to copy the displayed number. Home Cell Work Other Press NEXT . Press CID or DIR to highlight one of the following types:
Press NEXT . The screen displays ENTER NAME. Use the dialing keys (see page 65) to enter a name. Press SAVE to confirm and the screen shows Saved. You hear a confirmation tone. Press DELETE/X to erase a character. Press and hold DELETE/X to erase all characters. Press CID or DIR to move the cursor to the left or right. NOTE: You cannot create new entries in your downloaded directories from your TL96273/
TL96373/TL96473/TL96323. Entries must be downloaded from your cell phone (see Download directory on pages 19-20). 64 Directory Create and review entries Dialing keys 10
11
, Characters by number of key presses 3
C F I L O R V Y 4
, a d g j m S t Z 5
b e h k n p u w 6
) c f i l o q v x 7
2 3 4 5 6 r 8 y 8
s z 9
7 9 1 1 A D G J M P T W Space 2
. B E H K N Q U X 0 Dialing key 1 2 3 4 5 6 7 8 9 0
NOTE: When entering a name in the directory, the first letter of each word is automatically capitalized. 65 Directory Create and review entries Add a predialed telephone number to the directory You can save a predialed telephone number to the directory. To add a predialed telephone number:
Using a handset:
1. Home Cell Work Other Enter the telephone number in idle mode (see Step 5 in Create a new entry in the home directory on page 64). Press SAVE to move on to edit the number (see Step 3 in Edit a directory entry on page 71) and then press NEXT . Press CID or DIR to highlight one of the following types:
Press NEXT . The screen displays ENTER NAME. Use the dialing keys (see page 65) to enter the name. Press SAVE and the screen shows Saved. You hear a confirmation tone. Press MUTE/DELETE to erase a character. Press and hold MUTE/DELETE to erase all characters. Press CID or DIR to move the cursor to the right or left. 2. 3. 4. 5. 6. 66 Directory Create and review entries Using the telephone base:
1. 2. 3. 4. 5. Home Cell Work Other Enter the telephone number in idle mode (see Step 5 in Create a new entry in the home directory on page 63). Press SAVE to move on to the number (see Step 3 in Edit a directory entry on page 71) and then press NEXT . Press CID or DIR to highlight one of the following types:
Press NEXT . The screen displays ENTER NAME. Use the dialing keys (see page 65) to enter a name. Press DELETE/X to erase a character. Press and hold DELETE/X to erase all characters. Press CID or DIR to move the cursor to the left or right. 6. Press SAVE and the screen shows Saved. You hear a confirmation tone. 67 Directory Create and review entries Review the directory Entries are sorted alphabetically. To review the directory:
Using a handset or telephone base:
1. 2. Press DIR in idle mode. Press CID or DIR on handset, or CID or DIR on the telephone base to highlight a directory, then press REVIEW . Press CID or DIR on handset, or CID or DIR on the telephone base to browse.
-OR-
Press MENU in idle mode. Press CID or DIR on handset, or CID or DIR on the telephone base to highlight Directory, then press SELECT . Press CID or DIR on handset, or CID or DIR on the telephone base to highlight a directory, then press REVIEW . Press CID or DIR on handset, or CID or DIR on the telephone base to browse.
-OR-
Press OPTION while on call. Press CID or DIR on handset, or CID or DIR on the telephone base to highlight Directory, then press SELECT . Press CID or DIR on handset, or CID or DIR on the telephone base to highlight a directory, then press REVIEW . Press CID or DIR on handset, or CID or DIR on the telephone base to browse. 3. 1. 2. 3. 4. 1. 2. 3. 4. NOTE: When the desired entry displays, press # (pound key) on the handset or telephone base repeatedly to show different dialing options. 68 Directory Create and review entries 3-character alphabetical search You can use the enhanced 3-character search to find your contacts quickly and efficiently. To start the search:
1. 2. Follow the steps in Review the directory on the previous page to enter the directory. When an entry appears, use the dialing keys to enter the letters associated with the name (see page 65). You can enter up to 3 letters for the search. The letters will show at the top left hand corner of the screen. After you have entered one to three letters, the system starts searching in the directory. If there is no name matching the letter(s) entered, the next closest match in alphabetical order appears. If necessary, press CID or DIR on the handset, or CID or DIR on the telephone base to browse. NOTE: The cursor automatically moves to the next position 2 seconds after you enter a letter. If you do not enter another letter in the coming 2 seconds, the system starts searching in the directory. 69 Directory Dial, edit or delete a directory Dial a directory entry You can dial a directory entry on any line. To dial a directory entry:
1. 2. 3. Search for the desired entry in the directory (see Review the directory and 3-character alphabetical search on pages 68 and 68). When the desired entry appears, press # (pound key) repeatedly on the handset or telephone base to show different dialing options. When the displayed number is in the correct format, press HOME/FLASH or
/SPEAKER on the handset, or press HOME on the telephone base to use the home line. Press CELLULAR on the handset or on the telephone base to use the cell line. 70 Directory Dial, edit or delete a directory Edit a directory entry You can edit any directory entry. However, be aware that if you download a directory from a cell phone again, the directory is erased and replaced with the current cell phone directory. If you have edited the downloaded entries on the TL96273/TL96373/TL96473/TL96323, those changes are lost. To avoid losing changes made to the downloaded directory, we suggest that you edit numbers in your cell phone, then download the directory. Using a handset:
1. Search for the desired entry in the directory (see Review the directory or 3-character alphabetical search on pages 68 or 68). When the desired entry appears, press EDIT . The handset shows EDIT NUMBER. Use the dialing keys to edit the number. Press MUTE/DELETE to erase a digit. Press and hold MUTE/DELETE to erase all digits. Press CID or DIR to move the cursor to the right or left. Press and hold REDIAL/PAUSE to insert a dialing pause (a p appears). Press NEXT . Press CID or DIR to highlight one of the following types:
Press NEXT . The screen displays EDIT NAME. Use the dialing keys (see page 65) to enter the name. Press SAVE to confirm and the handset shows Saved. Press MUTE/DELETE to erase a character. Press and hold MUTE/DELETE to erase all characters. Press CID or DIR to move the cursor to the right or left. Home Cell Work Other 2. 3. 4. 5. 6. 7. 8. 71 2. 3. 4. 5. 6. 7. 8. Directory Dial, edit or delete a directory Using the telephone base:
1. Search for the desired entry in the directory (see Review the directory or 3-character alphabetical search on pages 68 or 68). When the desired entry appears, press EDIT . The telephone base shows EDIT NUMBER. Use the dialing keys to edit the number. Press DELETE/X to erase a digit. Press and hold DELETE/X to erase all digits. Press CID or DIR to move the cursor to the right or left. Press and hold REDIAL/PAUSE to insert a dialing pause (a p appears). Press NEXT. Press CID or DIR to highlight one of the following types:
Press NEXT. The screen displays EDIT NAME. Use the dialing keys (see page 65) to edit the name. Home Cell Work Other Press DELETE/X to erase a character. Press and hold DELETE/X to erase all characters. Press CID or DIR to move the cursor to the left or right. Press SAVE to confirm and the handset shows Saved. 72 Directory Dial, edit or delete a directory Edit the type of a directory entry 2. If you only want to edit the type of a directory entry:
1. Search for the desired entry in the directory (see Review the directory or 3-character alphabetical search on pages 68 or 68). When the desired entry appears, press LABEL . Enter the corresponding shortcut keys shown on the screen.
-OR-
Press CLEAR to erase the assigned label. Delete a directory entry To delete an entry:
1. Search for the desired entry in the directory (see Review the directory or 3-character alphabetical search on pages 68 or 68). When the desired entry appears, press MUTE/DELETE on the handset or DELETE/X on the telephone base. The screen displays Delete contact? and the name of the entry. Press YES to confirm. The screen displays Contact deleted and then the next alphabetical entry in the directory. You hear a confirmation tone. 2. 3. NOTE: Once a directory entry is deleted, it cannot be retrieved. 73 Directory Dial, edit or delete a directory Remove a downloaded directory 2. 3. 4. 2. 3. 4. Using a handset:
1. Search for the desired downloaded directory in the directory menu (see Review the directory on page 68). When the desired downloaded directory is chosen, press OPTION , then press CID or DIR to highlight Remove dir. Press SELECT . The screen displays Directory Cell Phone A will be erased. Press YES to confirm. The handset displays Erasing directory... and then Directory removed. You hear a confirmation tone. Using the telephone base:
1. Search for the desired downloaded directory in the directory menu (see Review the directory on page 68). When the desired downloaded directory is chosen, press OPTION , then press CID or DIR to highlight Remove dir. Press SELECT . The screen displays Directory Cell Phone A will be erased. Press YES to confirm. The handset displays Erasing directory... and then Directory removed. You hear a confirmation tone. 74 Caller ID About caller ID This product supports caller ID services provided by most telephone service providers. Caller ID allows you to see the name, number, date and time of calls. The available caller ID information will appear after the first or second ring. Caller ID from the home line and cell line allows you to see the name, number, date and time of the incoming calls. The caller ID may appear differently if the caller is matched to a directory entry (see Memory match on page 76). Information about caller ID with call waiting Caller ID with call waiting lets you see the name and telephone number of the caller before answering the telephone, even while on another call. It may be necessary to change your telephone service to use this feature. Contact your telephone service provider if:
You have both caller ID and call waiting, but as separate services (you may need to combine these services). You have only caller ID service, or only call waiting service. You dont subscribe to caller ID or call waiting services. There are fees for caller ID services. In addition, services may not be available in all areas. Caller ID information is available only if both you and the caller are in areas offering caller ID service, and if both telephone service providers use compatible equipment. The caller ID information may not be available for every incoming call. The callers may intentionally block their names and/or telephone numbers. A caller ID log entry can show a maximum number of 15 digits. NOTE: You can use this product with regular caller ID service, or you can use this products other features without subscribing to caller ID or combined caller ID with call waiting service. 75 Caller ID Caller ID operation How the caller ID history (caller ID log) works The telephone stores caller ID information about the last 50 incoming calls in the telephone base. Entries are stored in reverse chronological order. The phone deletes the oldest entry when the log is full to make room for new calls. This information is common to the telephone base and all handsets, so changes made using any handset or the telephone base are reflected in all other handsets. If you answer a call before the information appears on the screen, it does not show in the caller ID history. NOTE: If the phone number has more than 15 digits, only the last 15 digits will be saved or shown in the caller ID log. Memory match If the incoming telephone number matches the last 7 digits of a telephone number in your directory, the name that appears on the screen matches the corresponding name in your directory. For example, if Christine Smith calls, her name appears as Chris if this is how you entered it into your directory. NOTE: The number you see on your caller ID is in the format sent by the telephone service provider. It usually delivers 10-digit telephone numbers (area code plus telephone number). If the last 7 digits of the incoming telephone number do not match a number in your directory, the name appears as it is delivered by the telephone service provider. 76 Caller ID Caller ID operation Review the caller ID log Review the caller ID history to find out who called, to easily return a call, or to copy the callers name and number into your directory. Caller ID log empty appears if there are no records in the caller ID log. Using a handset:
1. When a handset is in idle mode, press CID to review the caller ID history in reverse chronological order starting with the most recent call.
-OR-
You can also review the caller ID history by pressing MENU . Press CID or DIR to scroll to Caller ID log, then press SELECT . 2. 3. Press CID or DIR to highlight the desired line (home or cell), then press REVIEW . Press CID or DIR to browse. Callers name Callers number Time of call Charlie Johnson NEW 888-883-2445 7:45am 8/06 SAVE Appears when there are new or missed calls. Date of call 77 Caller ID Caller ID operation Using the telephone base:
1. When the telephone base is in idle mode, press CID to review the caller ID history in reverse chronological order starting with the most recent call.
-OR-
You can also review the caller ID history by pressing MENU . Press CID or DIR to scroll to Caller ID log, then press SELECT . 2. 3. Press CID or DIR to highlight the desired line (home or cell), then press REVIEW . Press CID or DIR to browse. NOTE: Only one handset or the telephone base can review the caller ID history at a time. If another handset or the telephone base tries to enter the caller ID log, it shows Not available at this time. Callers name Callers number Time of call NEW Charlie Johnson 888-883-2445 7:45am 8/06 SAVE Appears when there are new or missed calls. Date of call 78 Caller ID Caller ID operation View dialing options Although the caller ID log entries may contain 10 digits (the area code plus the 7-digit number), in some areas, you may need to dial only the seven digits, or 1 plus the seven digits, or 1 plus the area code plus the seven digits. You can change the number of digits that you dial from the caller ID log or store to the directory. While reviewing the caller ID log, press
# (pound key) repeatedly to show different dialing options for local and long distance numbers before dialing or saving the telephone number in the directory. Press 1 repeatedly if you need to add or remove 1 in front of the telephone number before dialing or saving it in the directory. When the number shows the correct format for dialing:
Press HOME/FLASH or /SPEAKER on the handset, or HOME on the telephone base to call the number using the home line.
-OR-
Press CELLULAR on the handset or on the telephone base to call the number using the cell line. 888-883-2445 1-888-883-2445 883-2445 1-883-2445 Press #
(pound key) 888-883-2445 1-888-883-2445 883-2445 1-883-2445 Press 1 Dial a caller ID log entry Using a handset:
1. Search for the desired entry in the caller ID log (see Review the caller ID log on page 77). When the desired entry is displayed and is in the correct format for dialing, press HOME/FLASH or /SPEAKER to dial with the home line, or CELLULAR to dial with the cell line. Using the telephone base:
1. Search for the desired entry in the caller ID log (see Review the caller ID log on page 78). When the desired entry is displayed and is in the correct format for dialing, press HOME to dial with the home line. Press CELLULAR to dial with the cell line. 2. 2. 79 Caller ID Caller ID operation Save a caller ID log entry to the directory Caller ID log entries can only be saved to the Home directory. To save a caller ID log entry:
Using a handset:
1. 2. 3. 4. 5. 6. 7. 8. Select a desired entry in the caller ID log (see Review the caller ID log on page 77). When the desired entry appears, press # (pound key) repeatedly to show different dialing options. When the number is in the correct format, press SAVE . The handset shows EDIT NUMBER. Use the dialing keys to edit the number. Press MUTE/DELETE to erase a digit. Press and hold MUTE/DELETE to erase all digits. Press CID or DIR to move the cursor to the right or left. Press and hold REDIAL/PAUSE to insert a dialing pause (a p appears). Press NEXT . Press CID or DIR to highlight one of the following types:
Press NEXT . The handset displays EDIT NAME. Use the dialing keys (see page 65) to edit the name. Press MUTE/DELETE to erase a character. Press and hold MUTE/DELETE to erase all characters. Press CID or DIR to move the cursor to the right or left. Press TONE to toggle the name order. For example, Robert Brown becomes Brown Robert when you press TONE . Home Cell Work Other 9. Press SAVE to confirm and the handset shows Saved. You hear a confirmation tone. 80 Caller ID Caller ID operation Using the telephone base:
1. 2. 3. 4. 5. 6. 7. 8. Select a desired entry in the caller ID log (see Review the caller ID log on page 78). When the desired entry appears, press # (pound key) repeatedly to show different dialing options. When the number is in the correct format, press SAVE . The telephone base shows EDIT NUMBER. Use the dialing keys to edit the number. Press DELETE/X to erase a digit. Press and hold DELETE/X to erase all digits. Press CID or DIR to move the cursor to the right or left. Press and hold REDIAL/PAUSE to insert a dialing pause (a p appears). Press NEXT . Press CID or DIR to highlight one of the following types:
Press NEXT . The telephone base displays EDIT NAME. Use the dialing keys (see page 65) to edit the name. Press DELETE/X to erase a character. Press and hold DELETE/X to erase all characters. Press CID or DIR to move the cursor to the left or right. Press TONE to toggle the name order. For example, Robert Brown becomes Brown Robert when you press TONE . Home Cell Work Other 9. Press SAVE to confirm and the telephone base shows Saved. You hear a confirmation tone. 81 Caller ID Caller ID operation Delete from the caller ID log To delete a single entry:
1. 2. Select a desired entry in the caller ID log (see Review the caller ID log on page 77 or page 78). When the desired entry is displayed, press MUTE/DELETE on the handset or press DELETE/X on the telephone base. The screen shows the previous caller ID log entry. You hear a confirmation tone. To delete all entries:
Using a handset:
1. Press CID on the handset in idle mode.
-OR-
a) CALLER ID LOG Home Press MENU on the handset in idle mode to enter the main menu. Press CID or DIR to highlight Caller ID log. Press SELECT . b) c) Press ERASE . If you choose the home caller ID log, the handset displays Delete all Home Calls? If you choose a cell phone caller ID log, the handset displays Delete all Cell phone A calls? Press YES to confirm. You hear a confirmation tone. ERASE REVIEW Using the telephone base:
1. Press MENU on the handset in idle mode to enter the main menu. Press CID or DIR to highlight Caller ID log. Press SELECT . Press CID on the telephone base in idle mode.
-OR-
a) b) c) Press ERASE . If you choose the home caller ID log, the handset displays Delete all Home Calls? If you choose a cell phone caller ID log, the handset displays Delete all Cell phone A calls? Press YES to confirm. You hear a confirmation tone. Home CALLER ID LOG ERASE REVIEW 2. 2. 82 Caller ID Caller ID operation Reasons for missing caller ID information There are occasions when other information or no information shows for various reasons:
On-screen message Reason L Private name Private number Private caller Unknown name Unknown number Unknown caller It is a long distance call. The caller prefers not to show the name. The caller prefers not to show the phone number. The caller prefers not to show the phone number and name. Your telephone service provider cannot determine the callers name. Your telephone service provider cannot determine the callers number. No information is available about this caller. 83 Caller ID Answering system Answering system settings Answer ON/OFF If you turn the answering system on, it answers calls and records messages only on the home line. If your paired cell phone has voicemail, callers can leave messages with that voicemail service. If your answering system is turned off and you change any of its settings, the answering system automatically turns on again and the screen displays Calls will be answered. When the answering system is turned on, the
/ANS ON light on the telephone base turns on and both the base and handset screens display ANS ON. To turn the answering system on or off:
Using the telephone base:
Press /ANS ON to turn the answering system on or off. When the answering system is turned on, it announces, Calls will be answered. The telephone base screen displays Calls will be answered. When the answering system is turned off, it announces, Calls will not be answered. The telephone base screen displays Calls will not be answered. Play messages Answering sys Directory Caller ID log BACK SELECT
-OR-
1. 2. 3. 4. Press MENU on the telephone base in idle mode to enter the main menu. Press CID or DIR to highlight Answering sys, then press SELECT . Press CID or DIR to highlight Answer ON/OFF, then press SELECT . Press CID or DIR to highlight On or Off, then press SET to save. You hear a confirmation tone. ANSWERING SYS Delete all old Record memo Answer ON/OFF BACK SELECT ANSWER ON/OFF
On Off BACK SET NOTES:
84 Answering system Answering system settings Using a handset:
1. 2. 3. 4. Press MENU in idle mode to enter the main menu. Press CID or DIR to highlight Answering sys, then press SELECT . Press CID or DIR to highlight Answer ON/OFF, then press SELECT . Press CID or DIR to highlight On or Off, then press SET to save. You hear a confirmation tone. Announcement An announcement is the greeting callers hear when calls are answered by the answering system. The telephone is preset with a greeting that answers calls with Hello, please leave a message after the tone. You can use this default announcement, or replace it with your own. Play your announcement Using a handset or telephone base:
1. Press MENU in idle mode to enter the main menu. 2. 3. 4. Press CID or DIR on the handset, or CID or DIR on the telephone base to highlight Answering sys, then press SELECT . Press SELECT again to select Announcement. The screen displays ANNOUNCEMENT and announces Announcement, press PLAY or RECORD. Press PLAY . 85 Answering system Answering system settings Record your own announcement Using a handset or telephone base:
1. Press MENU on the handset in idle mode to enter the main menu. 2. 3. 4. 5. 6. 7. Press CID or DIR on the handset or CID or DIR on the telephone base to scroll to Answering sys, then press SELECT . Press SELECT again to select Announcement. The screen displays ANNOUNCEMENT. The handset announces, Announcement, press PLAY or RECORD. Press RECORD . The telephone announces, Record after the tone. Press STOP when you are done. After the tone, speak towards the microphone of the handset or telephone base. Press STOP when you finish recording. The telephone automatically plays back the newly recorded announcement. Press STOP to stop the playback at any time. After the announcement playback, press PLAY to replay the recorded announcement, or RECORD to record again if desired. NOTES:
Your announcement can be up to 90 seconds in length. Announcements shorter than 2 seconds are not recorded. 86 Answering system Answering system settings Delete your announcement Using a handset or telephone base:
1. Press MENU in idle mode to enter the main menu. 2. 3. 4. 5. Press CID or DIR on the handset, or CID or DIR on the telephone base to scroll to Answering sys, then press SELECT . Press SELECT again to select Announcement. The screen displays ANNOUNCEMENT. Press PLAY to play the announcement. While the announcement is playing, press DELETE , MUTE/DELETE or DELETE/X on your handset or telephone base to delete your own recorded announcement. The handset displays Reset Announcement to default? Press YES to confirm. You hear a confirmation tone. ANSWERING SYS Announcement Delete all old Record memo BACK SELECT Announcement playback DELETE STOP ANSWERING SYS Announcement Delete all old Record memo BACK SELECT Announcement playback DELETE STOP 87 Answering system Answering system settings In the answering system setup menu, you can change the settings for call screening, number of rings, remote access code, message alert tone and recording time. Call screening The call screening feature lets you listen at the telephone base to a caller leaving a message. While monitoring an incoming message, you can answer the call by pressing HOME/FLASH or /SPEAKER on the handset, or pressing HOME on the telephone base. To turn call screening on or off:
ANS SYS SETUP Call screening
# of rings Remote code BACK SELECT CALL SCREENING
On Off Using a handset or telephone base:
1. ANS SYS SETUP BACK SET Call screening
# of rings Remote code Press MENU in idle mode to enter the main menu. Use CID or DIR on the handset or CID or DIR on the telephone base to scroll to Answering sys, then press SELECT . Use CID or DIR on the handset, or CID or DIR on the telephone base to scroll to Ans sys setup, then press SELECT twice to select Call screening. Press CID or DIR on the handset, or CID or DIR on the telephone base to choose between On and Off, then press SET to save. You hear a confirmation tone. BACK SET CALL SCREENING
On Off BACK SELECT 2. 3. 4. NOTE: For more information on call screening, see page 94. 88 Answering system Answering system settings Number of rings When the answering system is turned on, it answers all incoming home calls after the number of rings set. You can choose from 2, 3, 4, 5, or 6 rings; or toll saver. With toll saver selected, the answering system answers after 2 rings when you have new messages, and after 4 rings when you have no new messages. This enables you to check for new messages and avoid paying unnecessary long distance charges if you are calling from out of your local area. The default number of rings is 4. To set the number of rings:
Using a handset or telephone base:
1. 2. Press MENU in idle mode to enter the main menu. Press CID or DIR on the handset, or CID or DIR on the telephone base to highlight Answering sys, then press SELECT . Press CID or DIR on the handset, or CID or DIR on the telephone base to highlight Ans sys setup, then press SELECT . Press CID or DIR on the handset, or CID or DIR on the telephone base to highlight # of rings, then press SELECT . Press CID or DIR on the handset, or CID or DIR on the telephone base to choose from 6, 5, 4, 3, 2 or Toll saver, then press SET to save. You hear a confirmation tone. 3. 4. 5. ANS SYS SETUP Call screening
# of rings Remote code BACK SELECT
# OF RINGS 6 5
4 BACK SET ANS SYS SETUP Call screening
# of rings Remote code BACK SELECT NOTE: If you set the number of rings for the answering system as 2 or 3 rings, the caller ID announce feature may not have enough time to announce the callers full information. 6 5
4
# OF RINGS BACK SET 89 Answering system Answering system settings Remote access code A 2-digit security code is required to access the answering system remotely from any touch-tone telephone. The preset code is 19. You can change the code to any number from 00 to 99. To change the remote access code:
Using a handset or the telephone base:
1. Press MENU in idle mode to enter the main menu. 2. 3. 4. Use CID or DIR on the handset, or CID or DIR on the telephone base to scroll to Answering sys, then press SELECT . Use CID or DIR on the handset, or CID or DIR on the telephone base to scroll to Ans sys setup, then press SELECT . Press CID or DIR on the handset, or CID or DIR on the telephone base to scroll to Remote code, then press SELECT . 5. Use the dialing keys (0-9) to enter a 2-digit number from 00-99. Press MUTE/DELETE on handset, or DELETE/X on the telephone base to erase a digit. Press and hold MUTE/DELETE on the handset or DELETE/X on the telephone base to erase all digits. Press CID or DIR on the handset or CID or ANS SYS SETUP Call screening
# of rings Remote code BACK SELECT REMOTE CODE 19 BACK SET ANS SYS SETUP Call screening
# of rings Remote code BACK SELECT REMOTE CODE 19 BACK SET DIR on the telephone base to move the cursor to the right or left. Press SET to save. You hear a confirmation tone. 90 Answering system Answering system settings Message alert tone When the message alert tone is set to On, the telephone base beeps every 10 seconds to alert you to new messages. The tone stops when all new messages have been reviewed. By default, the message alert tone setting is Off. ANS SYS SETUP
# of rings Remote code Msg alert tone BACK SELECT To change the setting:
Using a handset or telephone base:
1. MSG ALERT TONE
On Off Press MENU in idle mode to enter the main menu. Use CID or DIR on the handset, or CID or DIR on the telephone base to scroll to Answering sys, then press SELECT . Use CID or DIR on the handset, or CID or DIR on the telephone base to scroll to Ans sys setup, then press SELECT . Press CID or DIR on the handset, or CID or DIR on the telephone base to scroll to Msg alert tone, then press SELECT . Press CID or DIR on the handset, or CID or DIR on the telephone base to choose between On and Off, then press SET to save your setting. You hear a confirmation tone.
# of rings Remote code Msg alert tone BACK SET BACK SELECT MSG ALERT TONE BACK SET ANS SYS SETUP
On Off 2. 3. 4. 5. NOTES:
You cannot set the message alert tone when another handset or the telephone base is accessing the answering system. The message alert tone beeps only if all the conditions below are met. Answering system is on. Message alert tone setting is on. There are new messages. 91 Answering system Answering system settings Temporarily turning off the message alert tone Pressing any telephone base key (except /HANDSET LOCATOR and DELETE/X) temporarily silences the message alert tone. The message alert tone plays with the next incoming message. Recording time You can set the recording time limit for each incoming message. The default setting is 3 minutes. To change the setting:
Using a handset or telephone base:
1. 2. Press MENU in idle mode to enter the main menu. Press CID or DIR on the handset, or CID or DIR on the telephone base to highlight Answering sys, then press SELECT . Press CID or DIR on the handset, or CID or DIR on the telephone base to highlight Ans sys setup, then press SELECT . Press CID or DIR on the handset, or CID or DIR on the telephone base to highlight Recording time, then press SELECT . Press CID or DIR on the handset, or CID or DIR on the telephone base to choose from 3 minutes, 2 minutes, or 1 minute, then press SET to save. You hear a confirmation tone. 3. 4. 5. ANS SYS SETUP Remote code Msg alert tone Recording time BACK SELECT RECORDING TIME
3 minutes 2 minutes 1 minute BACK SET ANS SYS SETUP Remote code Msg alert tone Recording time BACK SELECT MSG ALERT TONE
3 minutes 2 minutes 1 minute BACK SET 92 Answering system About the answering system and XX New messages display on the telephone base and handsets, Answering system and voicemail Your telephone has separate indicators for two different types of voice messages: those recorded on its built-in answering system and those recorded in your service providers voicemail (fees may apply). Your telephones built-in answering system messages and voicemail messages are separate. Each alerts you to new messages differently. If there are new messages in the built-in answering system. To listen to messages recorded on your digital answering system, press on the telephone base. To listen to messages with a handset, see To listen to messages with a handset on page 96. If telephone service provider is indicating that it has new voicemail for you. To listen to your voicemail, you typically dial an access number provided by your telephone service provider, followed by a security code or PIN. Some service providers bundle or combine multiple services like voicemail and call waiting, so you may not be aware that you have voicemail. To check what services you have and how to access them, contact your telephone service provider. To use your voicemail service rather than your answering system, turn off your answering system. To use your answering system rather than your voicemail service, contact your telephone service provider to deactivate your voicemail service. and New voicemail display on telephone base and handsets, your
/PLAY/STOP Using the answering system and voicemail together You can also use your telephone answering system and voicemail together by setting your built-in answering system to answer before voicemail answers as described below. To learn how to program your voicemail settings, contact your telephone service provider. Then, if you are on a call, or if the answering system is busy recording a message and you receive another call, the second caller can leave a voicemail message. Set your answering system to answer calls at least two rings earlier than your voicemail is set to answer. For example, if your voicemail answers after six rings, set your answering system to answer after four rings. Some voicemail providers may program the delay before answering calls in seconds instead of rings. In this case, allow six seconds per ring when determining the appropriate setting. 93 Answering system About the answering system Message capacity The answering system can record and store up to 99 messages. Each message can be up to 3 minutes in length depending on the message length set (see Recording time on page 92). The total storage capacity for the announcement, messages and memos is approximately 14 minutes. The actual recording time depends on individual message characteristics. Messages remain available for replay until you delete them. Voice prompts The system provides voice prompts to guide you through the setup procedures at the telephone base, message playback, remote access and recording outgoing announcements. Call screening at the telephone base or handset To screen calls at the telephone base:
If the answering system and call screening are on (see Call screening on page 88), the announcement and the incoming message broadcast at the telephone base when a call is answered by the answering system. Options while a message is being recorded:
Press VOLUME on the telephone base to adjust the call screening volume. Press screening. Press screening is set to off.
/PLAY/STOP to temporarily turn call screening if call
/PLAY/STOP or VOLUME to temporarily turn on the call To screen calls at the handset:
If the answering system is on and your answering system is recording a message, press SCREEN to screen the call on your handset and the screen displays the caller ID information. If you do not subscribe to caller ID service, the handset shows Home Incoming call. NOTE: The call screening setting on the base does not affect the call screening on the handset. Call intercept When a caller is leaving a message on your answering system, you can stop recording and talk to the caller by pressing HOME/FLASH or
/SPEAKER on the handset, or pressing HOME on the telephone base. 94 Answering system Message playback If you have both new and old messages, you can play either new or old messages. The caller ID information displays on the screens when you play messages and you can call back the caller. When playback begins, the handset and telephone base screens display the message status, caller ID information, and time and date of the message recorded. You hear the total number of messages followed by the day and time of the message. After the last message, the telephone announces, End of messages. and the screen displays End of messages. To listen to messages with the telephone base:
/PLAY/STOP to listen to messages. If you have either new or old Press messages, the messages play automatically. If you have both new and old messages:
To play new messages, press Play new msgs. To play old messages, press CID or DIR to highlight Play old msgs, then press
/PLAY/STOP or SELECT to select
/PLAY/STOP or SELECT . 95 Answering system Message playback To listen to messages with a handset:
1. 2. Press MENU in idle mode. Press SELECT to select Play messages. If you have either new or old messages, the messages play automatically. If you have both new and old messages:
To play new messages, press SELECT to select Play new msgs. To play old messages, press CID or DIR to highlight Play old msgs, then press SELECT . When the handset is playing a message, its screen shows [2]-Call info and the callers name or number. If the callers information is unavailable, the handset shows No caller info. Options during playback:
button to adjust the message playback audio quality. Press EQ Press /SPEAKER to play the messages through the handset earpiece. Press /SPEAKER again to return to playing messages though the speakerphone. Press CID /VOLUME/ DIR to adjust the speakerphone volume. Press SKIP to skip to the next message. Press REPEAT to repeat the message currently playing. Press REPEAT twice to listen to the previous message. Press MUTE/DELETE to delete the current message. The handset displays Message deleted briefly and the system advances to the next message. 96 Answering system Message playback Delete all old messages Using the telephone base:
Press DELETE/X when the phone is not in use. The telephone announces, To delete all old messages, press DELETE again. Press DELETE/X again. All previously reviewed messages are erased and the telephone announces, All old messages deleted. Using a handset or the telephone base:
1. 2. Press MENU idle mode to enter the main menu. Press CID or DIR on the handset or CID or DIR on the telephone base to highlight Answering sys, then press SELECT . Press CID or DIR on the handset or CID or DIR on the telephone base to highlight Delete all old, then press SELECT . The screen displays Delete all old messages? Then press YES to confirm. The screen displays Deleting... and then All old messages deleted! You hear a confirmation tone. 3. 4. 5. NOTE: You can only delete old messages, which are messages you have previously reviewed. 97 Answering system Message playback Record and play memos Memos are messages you record as reminders for yourself or others using the same answering system. You can record your own memos using a system handset or the base. Play and delete them the same way as incoming messages. To record a memo:
Using a handset or the telephone base:
1. 2. 3. 4. 5. Press MENU on the handset in idle mode to enter the main menu. Press CID or DIR on the handset, or CID or DIR on the telephone base to highlight Answering sys, then press SELECT . Press CID or DIR on the handset, or CID or DIR on the telephone base to highlight Record memo, then press SELECT . The system announces, Record after the tone. Press STOP when you are done. After the tone, speak towards the handset or telephone base. Press STOP when you finish recording. The handset announces, Recorded. and then returns to the previous menu. NOTES:
The system announces Memory is full, if you attempt to record a memo when the memory is full. Each memo can be up to 4 minutes in length. Memos shorter than 2 seconds are not recorded. 98 Play messages Answering sys Directory Caller ID log BACK SELECT ANSWERING SYS Announcement Delete all old Record memo BACK SELECT Recording memo... STOP Play messages Answering sys Directory Caller ID log BACK SELECT ANSWERING SYS Announcement Delete all old Record memo BACK SELECT Recording memo... STOP Answering system Remote access You can access the answering system remotely by dialing your home telephone number from any touch-tone telephone. To remotely access the answering system 1. 2. 3. 4. Dial your telephone number from any touch-tone telephone. When the system plays your announcement, enter the 2-digit remote access code (19 is the preset code, see page 90 to change it). You can also enter the remote commands (see Remote commands below). Hang up or press 8 to end the call and save all undeleted messages. Remote commands 1 Press to listen to all messages. 2 Press to listen to new messages only. 3 Press to delete the current message (during playback). 33 Press twice to delete all old messages. 4 Press to repeat the current message (during playback). 44 Press twice to listen to the previous message. 5 Press to stop.
*5 Press to listen to a list of remote commands. 6 Press to skip to the next message (during playback).
*7 Press to record a new announcement. 8 Press to hang up the call. 0 Press to turn the answering system on or off. 99 Appendix Expand your telephone system Your telephone can support up to 12 DECT 6.0 cordless handsets (AT&T model TL90071, sold separately) or up to 10 cordless handsets and 2 cordless headsets (sold separately). Visit www.telephones.att.com/headsets for a list of compatible DECT 6.0 cordless headsets. Each new handset or headset must be registered to the telephone base before use. You must register each handset or headset separately. To register a cordless headset to this telephone system, please refer to the users manual of the cordless headset for more details. To register a cordless handset, see below. The handsets provided within your product box are already registered as HANDSET 1 and so forth. Additional handsets are assigned numbers in the sequential order they are registered (up to HANDSET 12). Add and register handsets (optional) To register a handset:
1. Make sure the handset is out of the telephone base or charger and shows Put handset on BASE to register before you begin registration. 2. Put the handset you wish to register on the telephone base cradle, not the charger. 3. The handset displays Registering handset..., and the telephone base screen displays Registering... Please wait. It takes about 90 seconds to complete the registration process. The screens display HANDSET X Registered (X represents the registered handset number), and beeps when registration completes. If registration fails, the system will automatically try to register again. If it fails after the third try, the handset displays Registration failed, then Put handset on BASE to register. The telephone base screen displays Registration failed and then returns to the idle screen. This may take up to 5 minutes to occur. When the handset displays Put handset on BASE to register, please start again from Step 1 above. NOTES:
You cannot register a handset if any other system handset is in use. If you try to register more than 12 handsets to the telephone base, the telephone base shows Registration slots are full and sounds 2 beeps. 100 Appendix Deregister handsets If you want to replace a handset or reassign the designated handset number of a registered handset, you must deregister all the handsets and then individually register each handset again. To make deregistration easier, read all of the instructions on this page before you begin. Deregister all handsets To deregister all handsets:
1. 2. 3. 4. 5. Make sure that all handsets are out of the telephone base and chargers before you begin deregistration. Press and hold /HANDSET LOCATOR on the telephone base for about 10 seconds. The telephone base shows Registering handsets.... Please wait for 5 seconds, then it shows Deregister all devices? Release /HANDSET LOCATOR. Quickly press /HANDSET LOCATOR again or press YES . You must press NO Deregister all devices?
YES
/HANDSET LOCATOR or YES within 5 seconds. If the telephone base returns to the idle screen, start again with Step 1 above. The telephone base shows Please wait... and then returns to the idle screen. All system handsets show Put handset on BASE to register and you hear a confirmation tone when the deregistration completes. The deregistration process takes about 10 seconds to complete. After deregistering, register each handset again individually. See Adding and registering handsets (optional) on page 100. NOTES:
If the deregistration process fails, you may need to reset the system and try again. To reset, unplug the power from the telephone base and plug it back in. You cannot deregister the handsets if any other system handset is in use. Even if the battery is depleted, you can still deregister the handsets by following the steps above. If in Step 2 above you already have 12 registered handsets, the telephone base shows Registration slots are full and sounds 2 beeps. Continue holding
/HANDSET LOCATOR until Deregister all devices? displays. 101 Appendix Troubleshooting If you have difficulty with your telephone, please try the suggestions below. For customer service, or to purchase accessories or replacement parts, visit our website at www.telephones.att.com, or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. I cannot pair my cell phone to the telephone base. Make sure you have cellular coverage. Make sure your cell phone is compatible with your TL96273/TL96373/
TL96473/TL96323. Check the Bluetooth compatibility list at www.telephones.att.com. Make sure the Bluetooth function of your cell phone is turned on. See the users manual of your cell phone for more information. Make sure that you set your cell phone to search for devices. If the TL96273/TL96373/TL96473/TL96323 is in your cell phone device history list, delete it and try pairing again. Carefully follow the pairing instructions on pages 14-15 and make sure that your cell phone is not connected to any other Bluetooth device. Turn off your cell phone, then turn it on again. Reset the telephone base. Unplug the units electrical power. Wait for approximately 15 seconds, then plug it back in. Repeat the above suggestions. I cannot pair my headset to the telephone base. Make sure that your Bluetooth headset is in discoverable mode when pairing with the telephone base. See the users manual of your headset for more information on how to set your headset to discoverable mode. Make sure your headset is compatible with your TL96273/TL96373/
TL96473/TL96323. Check the Bluetooth compatibility list at www.telephones.att.com. Carefully follow the pairing instructions on pages 16-17 and make sure that your headset is not connected to any other Bluetooth device. Reset the telephone base. Unplug the units electrical power. Wait for approximately 15 seconds, then plug it back in. Repeat the above suggestions. I cannot connect my cell phone with the telephone base. Make sure that the Bluetooth function of your cell phone is turned on. See the users manual of your cell phone for more information. Make sure that your Bluetooth cell phone is not connected to any other Bluetooth device. Turn off your cell phone, then turn it on again. Make sure that your cell phone is on the active devices list. 102 Appendix Troubleshooting For some cell phones, you must authorize the TL96273/TL96373/
TL96473/TL96323 device in your cell phones Bluetooth feature. See the users manual of your cell phone for more information. Manually connect your cell phone to the TL96273/TL96373/TL96473/
TL96323. Refer to the users manual of your cell phone for more information. I cannot connect my headset with the telephone base. Make sure that your Bluetooth headset is not connected to any other Bluetooth device. Make sure that your headset is on the active devices list. I cannot put my headset in discoverable mode. Refer to the users manual of your headset for information on how to set your headset to discoverable mode. Make sure that the headset is not connected to any other Bluetooth device in order to successfully pair and connect to the telephone base. Carefully follow the pairing process on pages 16-17. Reset the telephone base. Unplug the units electrical power. Wait for approximately 15 seconds, then plug it back in. Repeat the above suggestions. I dont know how to search for or add new devices on my cell phone. Most cell phones have the Bluetooth feature in the connection or setup menus. Please refer to the users manual of your cell phone. In general, press the menu key on your cell phone, then look for the Bluetooth menu in the settings or connection menu. In the Bluetooth menu, select the option to search for or add new devices. My cell phone disconnects with the telephone base. My cell phone is connected to the telephone base, but I cannot make a cell call. Turn off your cell phone, then turn it on again. Make sure that you are not using your cell phone when on a cell call. Make sure that your cell phone is not in use when you are trying to make a cell call. For some smartphones, make sure that the cellular function is turned on. Bluetooth system busy appears on the display. Make sure that your cell phone is not in use when connected and on the active devices list. Make sure that your cell phone or headset is not connected to any other Bluetooth device. TL96273/TL96373/TL96473/TL96323 can only use one Bluetooth device at a time. 103 Appendix Troubleshooting The PIN on the telephone base does not work. The default PIN is 0000. If you have changed the PIN, it will appear on the telephone base in the pairing process. I cannot hear any audio on my telephone system when on a cell call. Make sure that your cell phones volume is not too low or muted. Reset the telephone base. Unplug the units electrical power. Wait for approximately 15 seconds, then plug it back in. Turn off your cell phone, then turn it on again. The listening volume of my cell call is too loud or quiet. During a cell call, if the listening volume is too loud or quiet, try changing the volume on your cell phone. On some cell phones, changing the volume on the cell phone effects your cell call volume on the TL96273/
TL96373/TL96473/TL96323. I cannot download contacts from my cell phone to my TL96273/
TL96373/TL96473/TL96323. Make sure that your cell phone is paired and connected to the base. Make sure you place your cell phone next to the base while downloading. If your cell phone does not support the download, you can send the directory from your cell phone. The system can receive the directory automatically. See the users manual of your cell phone for more information. I see duplicate entries in my downloaded directory. If you see duplicate directory entries, you can delete them manually. Another option is to download again either your SIM card or phone memory, but not both. Some of my cell phone contacts were not imported to my TL96273/
TL96373/TL96473/TL96323. Try copying the contacts from your SIM card to your cell phone memory first, then download from your phone memory. If that doesnt work, try copying the contacts from your cell phone memory to your SIM card, then download from your SIM card. For more information on how to transfer contacts between your SIM card and your phone memory, refer to the users manual of your cell phone. Can the TL96273/TL96373/TL96473/TL96323 help the poor cell phone reception in my house?
If your cell phone has poor reception in your home, the TL96273/
TL96373/TL96473/TL96323 cannot improve the reception. However, if you have a location in your house with better reception, you can leave your cell phone in that location while you use TL96273/TL96373/
TL96473/TL96323 cell line. In order for this to work, the cell phone must be within 30 feet of the telephone base for optimal performance. 104 Appendix Troubleshooting The listening volume of my cell call is too loud or quiet. During a cell call, if the listening volume is too loud or quiet, try changing the volume on your cell phone. On some cell phones, changing the volume on the cell phone effects your cell call volume on the TL96273/
TL96373/TL96473/TL96323 handset. My phone doesnt work at all. Make sure the power cord is securely plugged in. Make sure that the battery connector is securely plugged into the handset. Make sure the telephone line cord is securely and firmly plugged into the telephone base and the telephone wall jack. Charge the battery in the handset for at least 11 hours. For optimum daily performance, return the handset to the telephone base or charger when not in use. If the battery is depleted, charge the handset for at least 30 minutes before you use it. Refer to page 8 for details. Reset the telephone base. Unplug the electrical power. Wait for approximately 15 seconds, then plug it back in. Allow up to one minute for the handset and telephone base to reset. You may need to purchase a new battery. Please refer to Battery installation and charging (pages 6-8) in this users manual. I cannot get a dial tone. First try all the suggestions above. Move the handset closer to the telephone base. You might have moved out of range. Disconnect the telephone base from the telephone jack and connect to a different phone. If there is no dial tone on that phone either, the problem is in your wiring or telephone service. Contact your telephone service provider (charges may apply). Your line cord may be defective. Install a new telephone line cord. 105 Appendix Troubleshooting I cannot dial out. Try all the suggestions in I cannot get a dial tone on page 105. Make sure you have a dial tone before dialing. The handset may take a second or two to find the telephone base and produce a dial tone. This is normal. Wait an extra second before dialing. Eliminate any background noise. Noise from a television, radio or other appliances may cause the phone to not dial out properly. If you cannot eliminate the background noise, first try muting the handset before dialing, or dialing from another room in your home with less background noise. Disconnect the telephone base from the telephone wall jack and plug in a working telephone. If the other phones in your home are having the same problem, the problem is in your wiring or telephone service. Contact your telephone service provider (charges may apply). My handset isnt performing normally. Make sure the power cord is securely plugged into the telephone base. Plug the power adapter into a different working electrical outlet not controlled by a wall switch. Move the handset closer to the telephone base. You might have moved out of range. Reset the telephone base. Unplug the electrical power. Wait for 15 seconds then plug it back in. Allow up to one minute for the handset and telephone base to reset. Other electronic products such as HAM radios and other DECT phones can cause interference to your cordless telephone. Try installing your telephone as far away as possible from these types of electronic devices. The handset registration is unsuccessful. Follow the steps below to register the handset again. 1. Make sure the handset is out of the telephone base or charger and shows Put handset on BASE to register before you begin registration. 2. Put the handset you wish to register on the telephone base cradle, not the charger. 3. The handset displays Registering handset..., and the telephone base screen displays Registering... Please wait. It takes about 90 seconds to complete the registration process. The handset displays HANDSET X Registered
(X represents the registered handset number), and beeps when registration completes. Refer to Add and register handsets on page 100 for details. 106 Appendix Troubleshooting Out of range OR no power at base appears on my handset. Ensure that the telephone base is powered up. Place the handset in the telephone base for one minute to allow the handset and base to synchronize. Move the handset closer to the telephone base. You might have moved out of range. Reset the telephone base. Unplug the electrical power. Wait for 15 seconds then plug it back in. Allow up to one minute for the handset and telephone base to reset. Other electronic products such as HAM radios and other DECT phones can cause interference to your cordless telephone. Try installing your telephone as far away as possible from these types of electronic devices. The batteries do not hold a charge. If the handset is in the charger and the charge light does not come on, refer to The charge light is off (page 110) in this Troubleshooting guide. Charge the battery in the handset for at least 11 hours. For optimum daily performance, return the handset to the telephone base or charger when not in use. If the battery is depleted, it may take approximately 30 minutes to charge the handset before it shows Low battery, refer to page 8 for details. You may need to purchase a new battery. Please refer to Battery installation and charging (pages 6-8) in this users manual. I get noise, static, or a weak signal even when Im near the telephone base. If you subscribe to high-speed Internet service (digital subscriber line - DSL) through your telephone lines, you must install a DSL filter between the telephone line cord and the telephone wall jack (see page 7). The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters. You may be able to improve the performance of your cordless phone by installing your new telephone base as far as possible from any other existing cordless telephone system that may already be installed. Other electronic products such as HAM radios and other DECT phones can cause interference to your cordless telephone. Try installing your telephone as far away as possible from these types of electronic devices. Do not install this phone near a microwave oven or on the same electrical outlet. You may experience decreased performance while the microwave oven is operating. 107 Appendix Troubleshooting If your phone is plugged in with a modem or a surge protector, plug the phone (or modem/surge protector) into a different location. If this doesnt solve the problem, relocate your phone or modem farther apart from one another, or use a different surge protector. Relocate your phone to a higher location. The phone may have better reception when installed in a high area. Disconnect the telephone base from the telephone wall jack and plug in a working telephone. If the other phones in your home are having the same problem, the problem is in your wiring or telephone service. Contact your telephone service provider (charges may apply). I experience poor sound quality when using the speakerphone. For increased sound quality while using the speakerphone, place the handset on a flat surface with the dial pad facing up. When using a speakerphone, controlling background noise in your environment is essential. While you are listening to your party, press MUTE/DELETE to temporarily turn your microphone off. When it is your turn to speak, remember to press MUTE/DELETE again to turn the microphone on. Excessive background noise will cause a speakerphone to fade in and out. Try controlling the background noise by turning off any audio devices near the speakerphone. Also, try to avoid interrupting the person at the other end of the conversation while they are speaking. If background noise cannot be controlled, you should terminate speakerphone operation and return to normal handset mode. I hear other calls while using my phone. Disconnect the telephone base from the telephone wall jack and plug in a working telephone. If the other phones in your home are having the same problem, the problem is in your wiring or telephone service. Call your telephone service provider (charges may apply). While on a call or playing messages, there is too much noise, or the voice sounds tinny, shrill or flat. While on a call or playing messages, press the EQ handset until you find the settings that sounds the best (page 44). button on the 108 Appendix Troubleshooting My handset does not ring when I receive a call. Make sure that the ringer is not turned off. Refer to Ringer volume on page 32 in this users manual. Make sure the telephone line cord is plugged securely into the telephone base and the telephone jack. Make sure the power cord is securely plugged in. The handset may be too far from the telephone base. Charge the battery in the handset for at least 11 hours. For optimum daily performance, return the handset to the charger when not in use. You may have too many extension phones on your telephone line to allow all of them to ring simultaneously. Try unplugging some of the other phones. The layout of your home or office might be limiting the operating range. Try moving the telephone base to another location, preferably to a higher location. Disconnect the telephone base from the telephone wall jack and plug in a working telephone. If the other phones in your home are having the same problem, the problem is in your wiring or telephone service. Contact your telephone service provider (charges may apply). Test a working phone at the phone jack. If the other phone has the same problem, the problem is the phone jack. Contact your telephone service provider (charges may apply). Other electronic products such as HAM radios and other DECT phones can cause interference to your cordless telephone. Try installing your telephone as far away as possible from these types of electronic devices. Completely remove the battery. Replace the battery and place the handset in the telephone base. Wait for the handset to reestablish its connection with the telephone base. Allow up to one minute for this to take place. Your line cord might be defective. Try installing a new line cord. 109 Appendix Troubleshooting My calls cut in and out while Im using my handset. Other electronic products such as HAM radios and other DECT phones can cause interference to your cordless telephone. Try installing your telephone as far away as possible from these types of electronic devices. Do not install this phone near a microwave oven or on the same electrical outlet. You may experience decreased performance while the microwave oven is operating. If you plug your phone in with a modem or surge protector, plug the phone (or modem/surge protector) into a different location. If this doesnt solve the problem, relocate your phone or modem farther apart from one another, or use a different surge protector. Relocate your telephone base to a higher location. The phone may have better reception when installed in a high area. If the other phones in your home are having the same problem, the problem is in your wiring or local service. Contact your telephone service provider (charges may apply). Excessive background noise will cause a speakerphone to fade in and out. Try controlling the background noise by turning off any audio devices near the speakerphone. Also, try to avoid interrupting the person at the other end of the conversation while they are speaking. If background noise cannot be controlled, you should stop speakerphone operation and return to normal handset mode. When using a speakerphone, controlling background noise in your environment is essential. While you are listening to your party press MUTE/DELETE to temporarily turn your microphone off. When it is your turn to speak, remember to press MUTE/DELETE to turn the microphone on. The charge light is off. Make sure the power and line cords are plugged in correctly and securely. Unplug the electrical power. Wait for 15 seconds, then plug it back in. Allow up to one minute for the handset and telephone base to reset. Clean the handset and telephone base charging contacts each month using a pencil eraser or cloth. 110 Appendix Troubleshooting My caller ID isnt working. Caller ID is a subscription service. You must subscribe to this service from your telephone service provider for this feature to work on your phone. The caller must be calling from an area that supports caller ID. Both your and your callers telephone service providers must use caller ID compatible equipment. If you subscribe to high-speed Internet service (digital subscriber line - DSL) through your telephone lines, you must install a DSL filter between the telephone line cord and the telephone wall jack (see page 7). The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters. My telephone does not receive caller ID when on a call. Make sure you subscribe to caller ID with call waiting features provided by your telephone service provider. Caller ID features work only if both you and the caller are in areas offering caller ID service, and if both telephone companies use compatible equipment. show on the display and I dont know why. Your telephone has voicemail indication that is separate from the built-in answering system. If appears on the display, then your telephone has received a signal from your telephone service provider that you have a voicemail message waiting for you to retrieve from your telephone service provider. Contact your telephone service provider for more information on how to access your voicemail. Voicemail and I cannot retrieve voicemail messages. Your telephone has both a built-in answering system and voicemail indication. They are independent features and each alerts you to new messages differently (page 93). If you subscribe to voicemail service from your telephone service provider (charges may apply), contact your telephone service provider for more information on how to access your voicemail. I am receiving incomplete messages. If a caller leaves a very long message, part of it may be lost when the system disconnects the call after the maximum recording time you have set
(see Recording time on page 92). If the caller pauses for longer than 7 seconds, the system stops recording and disconnects the call. If the systems memory becomes full during a message, the system stops recording and disconnects the call. If the callers voice is very soft, the system may stop recording and disconnect the call. 111 Appendix Troubleshooting I am having difficulty in hearing messages. Press VOLUME Press /VOL to increase the listening volume on a handset. to increase speaker volume on the telephone base. The answering system does not answer after the correct number of rings. Make sure the answering system is on. When the answering system is on, ANS ON should show on the handset and the ANS ON light is lit on the telephone base (page 84). If toll saver is selected (page 89), the number of rings changes to two when there are new messages waiting. If the memory is full or the system is off, the system answers after 10 rings. In some cases, the answering system is affected by the ringing system used by the telephone service provider. If you subscribe to voicemail service, change the number of rings so that your answering system answers before your voicemail answers (page 93). To determine how many rings activate your voicemail, please contact your telephone service provider. If there is a fax machine connected to the same telephone line, try disconnecting the fax machine. If that solves the problem, consult your fax machine documentation for information on compatibility with answering systems. The answering system announces Time and day not set. You need to set the date and time (page 22). The answering system does not respond to remote commands. Make sure to enter your remote access code correctly (page 99). Make sure you are calling from a touch-tone phone. When you dial a number, you should hear tones. If you hear clicks, the phone is not a touch-
tone telephone and cannot activate the answering system. The answering system may not detect the remote access code while your announcement is playing. Try waiting until the announcement is over before entering the code. There may be interference on the phone line you are using. Press the dial pad keys firmly. 112 Appendix Troubleshooting The answering system does not record messages. Make sure the answering system is on (page 84). Make sure the memory of the answering system is not full. When the answering machine memory is full, it does not record new messages until some old messages are deleted. If you subscribe to voicemail service, change the number of rings so that your answering system answers before your voicemail answers (page 93). To determine how many rings activate your voicemail, please contact your telephone service provider. If there is a fax machine connected to the same telephone line, try disconnecting the fax machine. If that solves the problem, consult your fax machine documentation for information on compatibility with answering systems. The outgoing announcement is not clear. When you record your announcement, make sure you speak in a normal tone of voice, about nine inches from the telephone base. Make sure there is no background noise (TV, music, etc.) while recording. I subscribe to a nontraditional telephone service that uses my computer to establish connections, and my telephone doesnt work. Make sure your computer is powered on. Make sure your Internet connection is working properly. Make sure that the software is installed and running for your nontraditional telephone service. Make sure to plug your USB telephone adapter into a dedicated USB port on your computer. Do not plug into a multiple port USB hub (USB splitter) that is not powered. In a few rare instances, the USB port on your computer may not have enough power. In these instances, try using a USB hub with its own external power supply. If you are using a firewall, it may prevent access to your nontraditional telephone service provider. Contact your service provider for more information. 113 Appendix Troubleshooting Common cure for electronic equipment:
If the telephone is not responding normally, try resetting the telephone. Do the following in the order listed:
1. 2. 3. 4. 5. Disconnect the power to the telephone base. Disconnect the handset battery, and spare battery, if applicable. Wait a few minutes. Connect power to the telephone base. Completely remove the battery. Replace the battery and place the handset into the telephone base. Wait for the handset to reestablish its connection with the telephone base. Allow up to one minute for this to take place. 6. 114 Appendix Maintenance Taking care of your telephone Your cordless telephone contains sophisticated electronic parts, so it must be treated with care. Avoid rough treatment. Place the handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it. Avoid water Your telephone can be damaged if it gets wet. Do not use the handset in the rain, or handle it with wet hands. Do not install the telephone base near a sink, bathtub or shower. Electrical storms Electrical storms can sometimes cause power surges harmful to electronic equipment. For your own safety, take caution when using electric appliances during storms. Cleaning your telephone Your telephone has a durable plastic casing that should retain its luster for many years. Clean it only with a soft cloth slightly dampened with water or mild soap. Do not use excess water or cleaning solvents of any kind. Remember that electrical appliances can cause serious injury if used when you are wet or standing in water. If the telephone base should fall into water, DO NOT RETRIEVE IT UNTIL YOU UNPLUG THE POWER CORD AND TELEPHONE LINE CORDS FROM THE WALL. Then pull the telephone out by the unplugged cords. 115 Appendix Important safety information This symbol is to alert you to important operating or servicing instructions that may appear in this users manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. Safety information Read and understand all instructions in the users manual. Observe all markings on the product. Avoid using a telephone during a thunderstorm. There might be a slight chance of electric shock from lightning. Do not use a telephone in the vicinity of a gas leak. Under certain circumstances, a spark may be created when the adapter is plugged into the power outlet, or when the handset is replaced in its cradle. This is a common event associated with the closing of any electrical circuit. The user should not plug the phone into a power outlet, and should not put a charged handset into the cradle, if the phone is located in an environment containing concentrations of flammable or flame-supporting gases, unless there is adequate ventilation. A spark in such an environment could create a fire or explosion. Such environments might include: medical use of oxygen without adequate ventilation; industrial gases (cleaning solvents; gasoline vapors; etc.); a leak of natural gas; etc. Do not use this product near water, or when you are wet. For example, do not use it in a wet basement or shower, or next to a swimming pool, bathtub, kitchen sink, or laundry tub. Do not use liquids or aerosol sprays for cleaning. If the product comes in contact with any liquids, unplug any line or power cord immediately. Do not plug the product back in until it has dried thoroughly. Install this product in a protected location where no one can trip over any line or power cords. Protect cords from damage or abrasion. If this product does not operate normally, read the Troubleshooting section on pages 102-114 of this users manual. If you cannot solve the problem, or if the product is damaged, refer to the Limited warranty section on pages 120-121. Do not open this product except as may be directed in your users manual. Opening the product or reassembling it incorrectly may expose you to hazardous voltages or other risks. Replace batteries only as described in your users manual (pages PB-8). Do not burn or puncture batteries they contain caustic chemicals. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-
table or cabinet outlet. CAUTION: Use only the power adapter provided with this product. To obtain a replacement, visit our website at www.telephones.att.com, or call 1 (800) 2223111. In Canada, dial 1 (866) 288-4268. Especially about cordless telephones Privacy: The same features that make a cordless telephone convenient create some limitations. Telephone calls are transmitted between the telephone base and the handset by radio waves, so there is a possibility that your cordless telephone conversations could be intercepted by radio receiving equipment within range of the cordless handset. For this reason, you should not think of cordless telephone conversations as being as private as those on . telephones. Electrical power: The telephone base of this cordless telephone must be connected to a working electrical outlet which is not controlled by a wall switch. Calls cannot be made from the handset if the telephone base is unplugged, switched off or if the electrical power is interrupted. 116 Appendix Important safety information Potential TV interference: Some cordless telephones operate at frequencies that may cause interference to TVs and VCRs. To minimize or prevent such interference, do not place the telephone base of the cordless telephone near or on top of a TV or VCR. If interference is experienced, moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference. Rechargeable batteries: This product contains nickel-metal hydride rechargeable batteries. Exercise care in handling batteries in order not to create a short circuit with conductive material such as rings, bracelets, and keys. The battery or conductor may overheat and cause harm. Observe proper polarity between the battery and the battery charger. Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe manner. Do not burn or puncture. Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury. The RBRC Seal means that the manufacturer is voluntarily participating in an industry program to collect and recycle nickel-metal hydride rechargeable batteries when taken out of service within the United States. These batteries may be taken to a participating local retailer of replacement batteries or recycling center. Or you may call 1 (800) 8-BATTERY for locations accepting spent Ni-MH batteries. Precautions for users of implanted cardiac pacemakers Cardiac pacemakers (applies only to digital cordless telephones): Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless telephones and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that:
Pacemaker patients Should keep wireless telephones at least six inches from the pacemaker. Should NOT place wireless telephones directly over the pacemaker, such as in a breast pocket, when it is turned ON. Should use the wireless telephone at the ear opposite the pacemaker. WTRs evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless telephones. Especially about telephone answering systems Two-way recording: This unit does not sound warning beeps to inform the other party that the call is being recorded. To ensure that you are in compliance with any federal or state regulations regarding recording a telephone call, you should start the recording process and then inform the other party that you are recording the conversation. SAVE THESE INSTRUCTIONS 117 Appendix FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US:AAAEQ##TXXXX. This identifier must be provided to your telephone service provider upon request. The plug and jack used to connect this equipment to premises wiring and the telephone network must comply with the applicable Part 68 rules and technical requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. An RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two lines. See Installation Instructions in the users manual. The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone line and still have them ring when you are called. The REN for this product is encoded as the 6th and 7th characters following the US: in the product identifier (e.g., if ## is 03, the REN is 0.3). In most, but not all areas, the sum of all RENs should be five (5.0) or less. For more information, please contact your telephone service provider. This equipment may not be used with Party Lines. If you have specially wired alarm dialing equipment connected to your telephone line, ensure the connection of this equipment does not disable your alarm equipment. If you have questions about what will disable the alarm equipment, consult your telephone service provider or a qualified installer. If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents. For repair procedures, follow the instructions outlined under the Limited Warranty. If this equipment is causing harm to the telephone network, the telephone service provider may temporarily discontinue your telephone service. The telephone service provider is required to notify you before interrupting service. If advance notice is not practical, you will be notified as soon as possible. You will be given the opportunity to correct the problem and the telephone service provider is required to inform you of your right to file a complaint with the FCC. Your telephone service provider may make changes in its facilities, equipment, operation, or procedures that could affect the proper functioning of this product. The telephone service provider is required to notify you if such changes are planned. If this product is equipped with a corded or cordless handset, it is hearing aid compatible. Remain on the line and briefly explain the reason for the call before hanging up. Perform such activities in off-peak hours, such as early morning or late evening. If this product has memory dialing locations, you may choose to store emergency telephone numbers (e.g., police, fire, medical) in these locations. If you do store or test emergency numbers, please:
Industry Canada Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference, including interference that may cause undesired operation. The term IC: before the certification/registration number only signifies that the Industry Canada technical specifications were met. The Ringer Equivalence Number (REN) for this terminal equipment is 1.0. The REN is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices does not exceed five. This product meets the applicable Industry Canada technical specifications. 118 Appendix FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this telephone. To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The handset may be safely held against the ear of the user. The telephone base shall be installed and used such that parts of the users body other than the hands are maintained at a distance of approximately 20cm (8 inches) or more. This Class B digital apparatus complies with Canadian ICES-003. 119 Appendix Limited warranty The AT&T brand is used under license - any repair, replacement or warranty service, and all questions about this product should be directed to: In the United States of America, call 1 (800) 222-3111 or visit www.telephones.att.com. In Canada, call 1 (866) 288-4268. 1. What does this limited warranty cover?
The manufacturer of this AT&T branded product warrants to the holder of a valid proof of purchase (CONSUMER or you) that the product and all accessories provided in the sales package (PRODUCT) are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the PRODUCT operating instructions. This limited warranty extends only to the CONSUMER for products purchased and used in the United States of America and Canada. 2. 3. 4. What will be done if the PRODUCT is not free from defects in materials and workmanship during the limited warranty period (materially defective PRODUCT)?
During the limited warranty period, the manufacturers authorized service representative repairs or replaces at the manufacturers option, without charge, a materially defective PRODUCT. If the manufacturer repairs the PRODUCT, they may use new or refurbished replacement parts. If the manufacturer chooses to replace the PRODUCT, they may replace it with a new or refurbished PRODUCT of the same or similar design. The manufacturer will retain the defective parts, modules, or equipment. Repair or replacement of the PRODUCT, at the manufacturers option, is your exclusive remedy. The manufacturer returns the repaired or replacement products to you in working condition. You should expect the repair or replacement to take approximately 30 days. How long is the limited warranty period?
The limited warranty period for the PRODUCT extends for ONE (1) YEAR from the date of purchase. If the manufacturer repairs or replaces a materially defective PRODUCT under the terms of this limited warranty, this limited warranty also applies to repaired or replacement PRODUCT for a period of either (a) 90 days from the date the repaired or replacement PRODUCT is shipped to you or (b) the time remaining on the original one-year limited warranty; whichever is longer. What is not covered by this limited warranty?
This limited warranty does not cover:
PRODUCT that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water, or other liquid intrusion; or PRODUCT that has been damaged due to repair, alteration, or modification by anyone other than an authorized service representative of the manufacturer; or PRODUCT to the extent that the problem experienced is caused by signal conditions, network reliability or cable or antenna systems; or PRODUCT to the extent that the problem is caused by use with non-AT&T accessories; or PRODUCT whose warranty/quality stickers, PRODUCT serial number plates or electronic serial numbers have been removed, altered or rendered illegible; or PRODUCT purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for commercial or institutional purposes (including but not limited to products used for rental purposes); or PRODUCT returned without a valid proof of purchase (see item 6 below); or Charges for installation or setup, adjustment of customer controls, and installation or repair of systems outside the unit. 120 Appendix Limited warranty 5. 6. 7. How do you get warranty service?
To obtain warranty service in the United States of America, visit www.telephones.att.com or call 1 (800) 222-3111. In Canada, please dial 1 (866) 288-4268. NOTE: Before calling for service, please review the users manual. A check of the PRODUCTs controls and features might save you a service call. Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the PRODUCT(s) to the service location. The manufacturer will return repaired or replaced PRODUCT under this limited warranty. Transportation, delivery or handling charges are prepaid. The manufacturer assumes no risk for damage or loss of the PRODUCT in transit. If the PRODUCT failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, the manufacturer notifies you and requests that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for the repair of products that are not covered by this limited warranty. What must you return with the PRODUCT to get warranty service?
You must:
a. Return the entire original package and contents including the PRODUCT to the service location along with a description of the malfunction or difficulty; and Include valid proof of purchase (sales receipt) identifying the PRODUCT purchased
(PRODUCT model) and the date of purchase or receipt; and Provide your name, complete and correct mailing address, and telephone number. b. c. Other limitations This warranty is the complete and exclusive agreement between you and the manufacturer of this AT&T branded PRODUCT. It supersedes all other written or oral communications related to this PRODUCT. The manufacturer provides no other warranties for this PRODUCT. The warranty exclusively describes all of the manufacturers responsibilities regarding the PRODUCT. There are no other express warranties. No one is authorized to make modifications to this limited warranty and you should not rely on any such modification. State/Provincial Law Rights: This warranty gives you specific legal rights, and you might also have other rights that vary from state to state or province to province. Limitations: Implied warranties, including those of fitness for a particular purpose and merchantability (an unwritten warranty that the PRODUCT is fit for ordinary use) are limited to one year from date of purchase. Some states/provinces do not allow limitations on how long an implied warranty lasts, so the above limitation might not apply to you. In no event shall the manufacturer be liable for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost profits or revenue, inability to use the PRODUCT or other associated equipment, the cost of substitute equipment, and claims by third parties) resulting from the use of this PRODUCT. Some states/provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion might not apply to you. Please retain your original sales receipt as proof of purchase. 121 Appendix Technical specifications RF frequency band 1921.536MHz 1928.448MHz Channels 5 Operating temperature Telephone base voltage
(AC voltage, 60Hz) Telephone base voltage
(AC adapter output) Handset voltage battery Charger voltage
(AC adapter output) Operating times*
32F 122F 0C 50C 96 129 Vrms 6VDC @600mA 2.4 VDC 400mAh, AAAx2, Ni-MH 6VAC @300mA Talk time (handset): up to 7 hours Talk time (speakerphone): up to 5 hours Standby: up to 7 days
* Operating times vary depending on your actual use and the age of the battery. DECT 6.0 digital technology The AT&T DECT 6.0 products offer unsurpassed range performance and sound clarity. This is achieved through a unique antenna design and advances in noise-filtering technology. An independent laboratory has confirmed that AT&T DECT 6.0 products perform up to 45% better in range competitions against similarly equipped phones of the leading competition. Now calls can be taken in the basement, backyard and garage with exceptional sound quality. Telephone operating range This cordless telephone operates within the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and telephone base can communicate over only a certain distance which can vary with the locations of the telephone base and handset, the weather, and the construction of your home or office. Redefining long range coverage and clarity This telephone base comes with an antenna which gives much better clarity and covers a longr range than before. HD audio HD audio improves sound quality by expanding and rebuilding frequencies that are lost with traditional phone calls. There is no additional telephone service requirement to use HD audio. It is designed to work with standard telephone service. Your system will automatically enhance all received sound with HD audio. 122 Index A Active devices, 26 Add a Bluetooth headset, 2122 Add a cell phone, 1920 Add a handset, 124 Alert tones, 119 Alphabetical search, 83 Announcement, 102104 Answer a cell call, 47 Answer a cell call while on a home call, 49 Answer a home call, 45 Answering system and voicemail, 110 Answering system settings, 101109 Answer on/off, 101 Appendix, 117146 B Base settings, 3143 Battery charging, 13 Battery installation, 13 Bluetooth, 1730 Bluetooth connection from idle mode, 22 Bluetooth features, 17 Bluetooth glossary, 18 Bluetooth setup, 1930 C Caller ID, 92100 Caller ID announce, 42 Caller ID display screen messages, 100 Caller ID history, 93 Caller ID log, 93 Call intercept, 111 Call screening, 105, 111 Call waiting on the cell line, 48 Call waiting on the home line, 46 Cell area code, 44 Cell call, 4748 Cell phone download directory, 2728 Chain dialing, 55 Change a one-to-one PTT to an intercom call, 73 Change PIN, 30 Charger installation, 12 Charging, 14 Clock, 13, 33 Connect an active device, 23 Create a new directory entry, 7778 D Date, 13, 33 Delete a directory entry, 87 Delete all old messages, 114 Delete a message, 112113 Delete a redial entry, 59 Delete from the caller ID log, 99 Delete the announcement, 104 Deregister handsets, 125 Dial a caller ID log entry, 96 Dial a directory entry, 84 Dial mode, 41 Directory, 2729, 7691 Disconnect an active device, 23 Display alerts, 35 Display screen messages, 121123 Download directory, 27 Download fail, 38 DSL filter, 11 E Edit a directory entry, 8586 Edit the type of a directory entry, 87 End a cell call, 47 End a home call, 45 End a PTT call, 74 123 Index H Handset icons, 117 Handset lights, 119 Handset locator, 60 Handset ringer volume, 31 Handset settings, 3143 HD audio, 146 Headset, 2122, 46 Hold, 54 Hold a call and intercom, 6566 Home area code, 43 Home directory, 76 I Icons, 117118 Important safety information, 140141 Indicator lights, 119120 Installation, 10 Intercom, 6266 Interruption to directory download, 29 K Key tone, 41 L Last number redial, 57 LCD language, 34 Lights, 119120 Limited warranty, 144145 Listening volume, 52 M Maintenance, 139 Make a call using speed dial, 90 Make a cell call, 4748 Make a home call, 45 Memory match, 93 Memos, 115 Message alert tone, 108 Message capacity, 111 Message playback, 112115 Missed calls, 35 Mute, 53 N No home line, 37 Number of rings, 106 O Operating range, 146 Options during playback, 112113 P Paging, 60 Phonebook (directory), 76 Play memos, 115 Predialing, 45, 4748 PTT, 6775 PTT to a group of devices, 7071 PTT to a single device, 6869 Pulse dialing, 41 Push-to-talk, 6775 Q Quick reference guide, 16 R Reassign a speed dial slot, 90 Record announcement, 103 Recording time, 109 Record memos, 115 Redial list, 5657 Register a handset, 124, 130 Remote access code, 107, 116 Remove a device, 24 Remove a downloaded directory, 88 Rename a paired device, 25 Repeat messages, 112, 113 Replace a handset, 125 124 Index S Safety information, 140141 Save a caller ID log entry to the directory, 97 Save a redial entry to the directory, 58 Search for a contact, 83 Set date/time, 13, 33 Share an outside call, 61, 6566 Silence the ringer, 52 Skip messages, 112, 113 Speakerphone, 52 Speed dial, 8991 Stop messages, 112, 113 T Take a call off mute, 53 Technical specifications, 146 Telephone base installation, 11 Telephone operating range, 146 Telephone operation, 4560 Telephone settings, 3144 Temporary tone dialing, 53 Time, 13, 33 Transfer a call, 6566 Troubleshooting, 126138 Turn on or off the answering system, 101 U Use a Bluetooth headset, 46 Using the home and cell lines together, 51 V View the directory download information, 29 Voice announce caller ID, 42 Voicemail, 36, 49, 110 Volume, 31, 41, 52, 112, 113 W Wall mounting, 15 Warranty, 144145 Website, 43 125 Remote access wallet card The wallet card below lists the commands needed to control your answering system from any touch-tone telephone. Cut along dotted line. Call your telephone number, then enter your 2-digit remote access code
(preset to 19). Remote command Action Play all messages .....................1 Play new messages ..................2 Delete the message .................3 (during message playback) Delete all old messages ........33 Repeat or go back ....................4 Fold here. Stop ..................................................5 Help menu ....................................*5 Skip the message ......................6 Record announcement ...........*7 Turn system on or off .............0 End remote access call ..........8 (or hang up) TL96273/TL96373/TL96473/TL96323 DECT 6.0 cordless telephone/answering system with BLUETOOTH wireless technology wireless technology 2013-2014 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219. Printed in China. www.telephones.att.com The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Advanced American Telephones and its parent, VTech Holdings Limited, is under license. VTech Holdings Limited is a member of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners. 2013-2014 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219. Printed in China. Issue 1 AT&T 01/13
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2013-03-08 | 2402 ~ 2480 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
| 2 | 1921.536 ~ 1928.448 | PUB - Part 15 Unlicensed PCS Base Station |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 2 | Effective |
2013-03-08
|
||||
| 1 2 | Applicant's complete, legal business name |
VTech Telecommunications Ltd
|
||||
| 1 2 | FCC Registration Number (FRN) |
0015973951
|
||||
| 1 2 | Physical Address |
23/F Tai Ping Ind Center Block 1
|
||||
| 1 2 |
Tai Po NT, N/A
|
|||||
| 1 2 |
Hong Kong
|
|||||
| app s | TCB Information | |||||
| 1 2 | TCB Application Email Address |
c******@intertek.com
|
||||
| 1 2 | TCB Scope |
A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
|
||||
| 1 2 |
A3: Unlicensed Personal Communication System (PCS) devices
|
|||||
| app s | FCC ID | |||||
| 1 2 | Grantee Code |
EW7
|
||||
| 1 2 | Equipment Product Code |
80-9087-00
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 2 | Name |
M******** T****
|
||||
| 1 2 | Title |
Approbation Supervisor
|
||||
| 1 2 | Telephone Number |
852-2********
|
||||
| 1 2 | Fax Number |
852-2********
|
||||
| 1 2 |
m******@vtech.com
|
|||||
| app s | Technical Contact | |||||
| 1 2 | Firm Name |
Intertek Testing Service Hong Kong Ltd.
|
||||
| 1 2 |
Intertek Testing Services Hong Kong Ltd.
|
|||||
| 1 2 | Name |
M**** N******
|
||||
| 1 2 | Physical Address |
Flat D, 5/F., Garment Centre
|
||||
| 1 2 |
Kowloon
|
|||||
| 1 2 |
Hong Kong
|
|||||
| 1 2 | Telephone Number |
852-2******** Extension:
|
||||
| 1 2 | Fax Number |
852-2********
|
||||
| 1 2 |
m******@intertek.com
|
|||||
| app s | Non Technical Contact | |||||
| 1 2 | Firm Name |
Intertek Testing Services Hong Kong Ltd.
|
||||
| 1 2 | Name |
M******** N********
|
||||
| 1 2 | Physical Address |
Flat D, 5/F., Garment Centre
|
||||
| 1 2 |
Kowloon
|
|||||
| 1 2 |
Hong Kong
|
|||||
| 1 2 | Telephone Number |
852-2******** Extension:
|
||||
| 1 2 | Fax Number |
852-2********
|
||||
| 1 2 |
m******@intertek.com
|
|||||
| app s | Confidentiality (long or short term) | |||||
| 1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 2 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
| 1 2 | PUB - Part 15 Unlicensed PCS Base Station | |||||
| 1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 1.9GHz Digital Modulation Cordless Phone - Base Unit Bluetooth Portion | ||||
| 1 2 | 1.9GHz Digital Modulation Cordless Phone - Base Unit | |||||
| 1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 2 | Modular Equipment Type | Does not apply | ||||
| 1 2 | Purpose / Application is for | Original Equipment | ||||
| 1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
| 1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 2 | Yes | |||||
| 1 2 | Grant Comments | Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
| 1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 2 | Firm Name |
Intertek Testing Services Hong Kong Ltd.
|
||||
| 1 2 | Name |
J******** H********
|
||||
| 1 2 | Telephone Number |
85221********
|
||||
| 1 2 | Fax Number |
85278********
|
||||
| 1 2 |
j******@intertek.com
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | ||||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 2 | 1 | 15D | 68 CC | 1921.53600000 | 1928.44800000 | 0.0590000 | |||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC