all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 1.44 MiB | February 28 2023 | |||
1 |
|
Internal Photos | Internal Photos | 2.21 MiB | February 28 2023 | |||
1 |
|
External Photos | External Photos | 2.80 MiB | February 28 2023 | |||
1 |
|
Label Artwork and Location | ID Label/Location Info | 208.04 KiB | February 28 2023 | |||
1 |
|
Attestation | Attestation Statements | 110.21 KiB | February 28 2023 | |||
1 | Block Diagram | Block Diagram | February 28 2023 | confidential | ||||
1 | Circuit Diagram | Schematics | February 28 2023 | confidential | ||||
1 |
|
Confidentiality Request | Cover Letter(s) | 25.26 KiB | February 28 2023 | |||
1 |
|
Config Photos | Test Setup Photos | 1.36 MiB | February 28 2023 | |||
1 |
|
Letter of Agency | Cover Letter(s) | 23.35 KiB | February 28 2023 | |||
1 |
|
SAR Photos | Test Setup Photos | 189.14 KiB | February 28 2023 | |||
1 |
|
SAR Report | RF Exposure Info | 2.07 MiB | February 28 2023 | |||
1 | Technical Description | Operational Description | February 28 2023 | confidential | ||||
1 |
|
Test Report | Test Report | 25.60 KiB | February 28 2023 |
1 | User Manual | Users Manual | 1.44 MiB | February 28 2023 |
Important safety instructions 1 Connect and charge the battery Go to www.vtechphones.com to register your product for enhanced warranty support and the latest VTech product news. DM221 DM221-2 Digital Audio Monitor Users manual Congratulations on purchasing your new VTech product. Before using this product, please read Important safety instructions. This manual has all the feature operations and troubleshooting necessary to install and operate your new VTech product. Please review this manual thoroughly to ensure proper installation and operation of this innovative and feature-rich VTech product. For support, shopping, and everything new at VTech, visit our website at www.vtechphones.com. Whats in the box 1 set for DM221;
2 sets for DM221-2 All rights reserved. 11/22. DM221-X_CIB_V12 2022 VTech Communications, Inc. Specications are subject to change without notice. Output: 6V DC 400mA Parent unit power adapter:
Output: 6V DC 400mA Baby unit power adapter:
Parent unit: 2.4V 750mAh Ni-MH battery Power requirement Nominal effective rangeMaximum power allowed by FCC and IC. Actual operating range may vary according to environmental conditions at the time of use. 35 (x) x 21.2 (y) mm B&W LCD 5 LCD Channels Parent unit: 1921.536-1928.448 MHz Baby unit: 1921.536-1928.448 MHz Transmit frequency Crystal controlled PLL synthesizer Frequency control
3 2 1 The applied nameplate is located in the battery compartment of the baby and parent units. When using your equipment, basic safety precautions should always be followed to reduce the risk of re, electric shock and injury, including the following:
1. Follow all warnings and instructions marked on the product. 2. Adult setup is required. 3. CAUTION: Do not install the baby unit at a height above 2 meters. 4. This product is not a substitute for adult supervision of the infant. Supervising the infant is the parents or caregivers responsibility. This product could cease operating, and therefore you should not assume it will continue working properly for any given period of time. Further, this is not a medical device and should not be used as such. This product is intended to assist you in supervising your baby. 5. Do not use this product near water. For example, do not use it next to a bath tub, wash bowl, kitchen sink, laundry tub or swimming pool, or in a wet basement or shower. 6. CAUTION: Use only the batteries provided. There may be a risk of explosion if a wrong type of battery is used for the parent unit. The batteries cannot be subjected to high or low extreme temperature and low air pressure at high altitude during use, storage or transportation. Disposal of batteries into re or a hot oven, or mechanically crushing or cutting or the batteries can result in an explosion. Leaving the batteries in an extremely high temperature surrounding environment can result in an explosion or the leakage of ammable liquid of gas. Batteries subjected to extremely low air pressure may result in an explosion or the leakage of ammable liquid or gas. Dispose of used battery according to the information in The RBRC seal. 6. Use only the adapters included with this product. Incorrect adapter polarity or voltage can seriously damage the product. 7. Use only adaptors and batteries listed below. Power adapter information:
Output: 6V DC 400mA VTECH TELECOMMUNICATIONS LTD. Model: VT05UUS06040 Rechargeable battery information:
2.4V 750mAh Ni-MH battery YIYANG CORUN BATTERY CO LTD. Model: Ni-MH AAA750*2 8. The power adapters are intended to be correctly oriented in a vertical or oor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-
the-table or cabinet outlet. 9. For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible. 10. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 11. Unplug the power cords before replacing batteries. 12. Do not cut off the power adapters to replace them with other plugs, as this causes a hazardous situation. 13. Do not allow anything to rest on the power cords. Do not install this product where the cords may be walked on or crimped. 14. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult your dealer or local power company. 15. Do not overload wall outlets or use an extension cord. 16. Do not place this product on an unstable table, shelf, stand or other unstable surfaces. 17. This product should not be placed in any area where proper ventilation is not provided. Slots and openings in the back or bottom of this product are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat register. 18. Never push objects of any kind into this product through the slots because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product. 19. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the product other than specied access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used. 20. You should test the sound reception every time you turn on the units or move one of the components. 21. Periodically examine all components for damage. 22. There is a very low risk of privacy loss when using certain electronic devices, such as baby monitors, cordless telephones, etc. To protect your privacy, make sure the product has never been used before purchase, reset the baby monitor periodically by powering off and then powering on the units, and power off the baby monitor if you will not use it for some time. 23. Children should be supervised to ensure that they do not play with the product. 24. The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. SAVE THESE INSTRUCTIONS Cautions 1. Use and store the product at a temperature between 32oF and 104oF. 2. Do not expose the product to extreme cold, heat or direct sunlight. Do not put the product close to a heating source. 3. Batteries should not be exposed to excessive heat such as bright sunshine or re. 4. WarningStrangulation HazardChildren have STRANGLED in cords. Keep this cord out of the reach of children (more than 3 ft (0.9 m) away). Do not remove this tag. 5. Never place the baby unit inside the babys crib or playpen. Never cover the baby unit or parent unit with anything such as a towel or a blanket. 6. Other electronic products may cause interference with your baby monitor. Try installing your baby monitor as far away from these electronic devices as possible: wireless routers, radios, cellular telephones, intercoms, room monitors, televisions, personal computers, kitchen appliances and cordless telephones. Precautions for users of implanted cardiac pacemakers Cardiac pacemakers (applies only to digital cordless devices):
Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless devices and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that:
Pacemaker patients Should keep wireless devices at least six inches from the pacemaker. Should NOT place wireless devices directly over the pacemaker, such as in a breast pocket, when it is turned ON. WTRs evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless devices.
This VTech product complies with all standards regarding electromagnetic elds (EMF). If handled properly and according to the instructions in this users manual, the product is safe to be used based on scientic evidence available today. 2 Before use (contd) Positioning the baby monitor Caution Keep the baby units out of the reach of your baby. Never place or mount the baby units inside the babys crib or playpen. 1. Place the baby units more than 3 feet (1 meter) away from your baby.
> 1m (3ft) 2. Place the parent unit more than 3 feet (1 meter) away from the baby unit to avoid screeching noise.
> 1m (3ft)
< 1m (3ft) Caution The default volume of your parent unit is level 3. If you experience high-pitched screeching noise from your baby monitor while positioning:
- Make sure your baby unit and parent unit are more than 3 feet (1 meter) apart, OR
- Turn down the volume of your parent unit. Operating range The operating range of the baby monitor is up to 1,000 feet (300 meters) outdoors or 160 feet
(50 meters) indoors. The actual operating range may vary depending on the environmental conditions, and other interferences such as walls, doors, and other obstructions. CABLE MANAGEMENT Install the parent unit battery The parent unit runs on rechargeable battery or AC power. To continuously monitor your baby, make sure you use both battery and AC power at the same time. With the battery alone, the parent unit can cordlessly run for a short time only. Charge the parent unit battery When you have connected the parent unit and installed its battery for the rst time or after power outage, the parent unit powers on automatically. The battery icon indicates the battery status (see the following table). NOTE NOTES Use only the battery supplied with this product. If the parent unit will not be used for a long time, disconnect and remove the battery to prevent possible leakage. 1 2 3 4 THIS SIDE UP THIS SIDE UP THIS SIDE UP THIS SIDE UP / CE CT VERS LE HAUT NONONote Make sure the label THIS SIDE UP is facing up while inserting the battery. NONONotes The parent unit battery is fully charged after 11 hours of continuous charging. It takes longer to charge the battery when the parent unit is turned on. To shorten the charging time, turn the parent unit off while charging. The standby time varies depending on the sensitivity level you set, your actual use and the age of the battery. Battery indicators The battery icon is off. The The screen displays LOW BATTERY and flashes. The battery icon becomes solid
. light Battery status No battery is installed but operates using AC power. The battery has very little charge and may be used for only a short time. Action Install the parent unit battery. Charge without interruption (at least 30 minutes). Charge without interruption (about 30 minutes). The battery is fully charged. To keep the battery charged, connect it to AC power when not in use. Replace the battery To replace the battery, unplug the battery connector from the socket, and then pull the battery out of the battery compartment. Follow the steps above to install the battery. 2 Before use Connect the baby monitor NOTE NOTES Use only the power adapters supplied with this product. Make sure the baby monitor is not connected to an electric outlet that is controlled by a switch. The power adapters prongs are not designed to hold the weight of your baby monitor. Make sure you connect the adapters to wall outlets that are in vertical or oor mount position. Do not connect them to undermount and ceiling outlets. Otherwise, your baby monitor would fall out of the outlets. Make sure the parent unit, the baby unit and the power adapter cords are out of reach of children. Test your baby monitor You may test the baby monitor before initial use, and at regular times thereafter. 1. Make sure your baby unit and parent unit are on. 2. Speak towards the microphone of the baby unit. You will hear the sound at the parent unit, and see the visual sound indicators light up. LINKED LINKED
> 1m (3ft) Caution For hearing protection, make sure the parent unit is more than 3 feet (1 meter) away from the baby unit. If you hear any high-pitched noise, move the parent unit further until the noise stops. You can also press VOLUME on the parent unit to lower or mute the noise. Note This baby monitor is intended as an aid. It is not a substitute for proper adult supervision, and should not be used as such. When the parent unit displays NOT LINKED and ashes, move the parent unit closer to the baby unit
(observe the minimum distance of 3 feet/ 1 meter). You can also check if the baby monitor is connected to a live power socket and switched on. Tip Increase the speaker volume of the parent unit if you cannot hear the sounds transmitted from the baby unit. 3 Using the baby monitor Power on or off the baby unit Press Press and hold to power on the baby unit. The power light turns on. to power off the baby unit. The power light turns off. Power on or off the parent unit Press Press and hold screen turns off. to power on the parent unit. The screen turns on. again to power off the parent unit. The Note The parent unit powers on automatically once it is connected to power socket or battery installed. The baby unit also powers on automatically once connected to power socket. Adjust the speaker volume for baby unit Press on the baby unit at any time. Note VOLUME The speaker of baby unit cannot be muted. Adjust the speaker volume for parent unit You can adjust the speaker volume from VOLUME 1 to VOLUME 5, or turn it off. The speaker volume is preset to VOLUME 3. Press When the speaker volume is set to VOLUME OFF, the screen displays when the parent unit is not in use. VOLUME
. 1. Press MENU when the parent unit is not in use. 2. Press SELECT to select VOX LEVEL. 3. Press 4. Press SELECT to conrm your selection. The screen displays SAVED and you hear a to choose the desired sensitivity level. or conrmation tone. Note To enter the VOX LEVEL menu of the parent unit, the baby unit must be turned on. Sound alert If you want the parent unit alerts you with sound, especially when the baby unit detects loud sounds, you can turn on the sound alert feature. This feature is preset to OFF. Once this feature is on, red light range, i.e. the baby unit detects loud sounds, your parent unit beeps and is shown on LCD display. When the visual sound indicator hits the flashes. 1. Press MENU when the parent unit is not in use. 2. Press 3. Press 4. Press SELECT to conrm your selection. The screen displays SAVED and you hear a to choose SOUND ALERT, then press SELECT. to choose ON or OFF. or or conrmation tone. Note The sound alert setting on each parent unit is independent. Vibration alert You can set your parent unit to vibrate and alert you, whenever the baby unit detects loud sounds. This feature is preset to OFF. HIGH HIGHEST Adjust the sound sensitivity of the baby unit You can choose to hear sounds from the baby unit all the time, or to hear sounds that exceed a certain level. You can use the parent unit to adjust the microphone sensitivity of your baby unit. The higher the sensitivity level, the more sensitive the baby unit is in detecting sounds for transmitting to the parent unit. The VOX sensitivity level is preset to HIGHEST. VOX Sensitivity level Description The parent unit speaker is constantly on, and you will hear all sounds
(including background noises) from your babys room. The parent unit speaker turns on for crying and louder sounds from your baby. It remains quiet when your baby makes soft sounds. The parent unit speaker turns on for soft babbling and louder sounds from your baby. It remains quiet when your baby sleeps soundly. The parent unit speaker turns on for loud crying or screeching sounds from your baby. It remains quiet when your baby makes soft sounds. The parent unit speaker turns on for loud babbling and louder sounds from your baby. It remains quiet when your baby makes soft sounds. MEDIUM LOWEST LOW is shown on LCD display. When the visual sound indicator hits the red Once this feature is on, light range, i.e. the baby unit detects loud sounds, your parent unit vibrates and 1. Press MENU when the parent unit is not in use. 2. Press 3. Press 4. Press SELECT to conrm your selection. The screen displays SAVED and you hear a to choose VIBE ALERT, then press SELECT. to choose ON or OFF. or or flashes. conrmation tone. Notes Each time you set the vibration alert to ON, the parent unit vibrates briey after you press SELECT. The vibration alert setting on each parent unit is independent. Nightlight Both your parent unit(s) and baby unit allow you to turn on or off the nighlight on the baby unit. Turn on/off the nightlight using the baby unit:
1. Press 2. Press to turn on the nightlight. again to turn off the nightlight. Turn on/off the nightlight using the parent unit:
1. Press MENU when the parent unit is not in use. 3 Using the baby monitor (Cont) Baby unit overview Parent unit overview Parent unit icons Status icons 4. Press SELECT to conrm your selection. The screen displays SAVED and you hear Off when night light is turned off 2. Press 3. Press 4. Press SELECT to conrm your selection. The screen displays SAVED and you hear to choose NIGHTLIGHT, then press SELECT. to choose ON or OFF. or or a conrmation tone. Notes When the nightlight is turned on, the parent unit displays The nightlight on baby unit operates even when the parent unit battery is out of charge or has been turned
. off. If the parent unit lost link, the nightlight icon on its LCD display will disappear, regardless of the nightlight status. Language You can select a language (English, Spanish or French) to be used in all screen displays. The language is preset to English. 1. Press MENU when the parent unit is not in use. 2. Press 3. Press or or to choose LANGUAGE, then press SELECT. to choose ENGLISH, ESPANOL, or FRANCAIS. a conrmation tone. Note The language setting on each parent unit is independent. Set default Use this feature to restore to the default settings. Restoring the default settings on one parent unit will also reset the shared settings for VOX sensitivity level of the other parent unit. 1. Press MENU when the parent unit is not in use. 2. Press 3. Press to choose SET DEFAULT, then press SELECT. to choose YES or NO. or or 4. When you choose YES, press SELECT to conrm your selection. The screen displays SAVED and you hear a conrmation tone.
When you choose NO, press SELECT to conrm your selection. The screen displays the previous menu. Talk to the baby unit You can broadcast messages from a parent unit to the baby unit and the other parent unit. If you have two parent units, you can use both of them at the same time to talk to the baby unit. 1. Press and hold TALK on the side of the parent unit. The screen displays TALK when the voice connection to the baby unit is made. 2. Speak towards the MIC on the parent unit. Your voice is broadcast to the baby unit and the other parent unit. 2 3 4 a b c d e f g h i a b c d e f g h i j k l m 1 Night light On when night light is turned on manually. manually. POWER light On when the baby unit is turned on. Press to turn the night light on or off. VOLUME Press to adjust the speaker volume. 5 6 7 8 9
Press to power on, and the power light turns on. Press and hold to power off, and the power light turns off. PAGE Press to start or stop paging parent 1 unit. Microphone Speaker Power jack Notes If you have two parent units, and you use one of them to talk to you baby, your voice will broadcast to both the baby unit and the other parent unit. The other parent unit displays TALKBACK. However, no sound will transmit from the baby unit to any parent unit during broadcasting. If speaker volume of the parent unit has been turned off before the talk, it will change to default volume level after the talk nished. Find/page the parent unit Use this feature to locate misplaced parent units. 1. Press PAGE on the baby unit. All idle parent units ring and display PAGING. 2. To end paging, press any key on the parent unit, or press PAGE on the baby unit. Notes Paging rings all parent units even if the speaker volume of parent unit is set to VOLUME OFF. The baby unit cannot page any parent unit that is turned off, out of range, or talking to the baby unit. Visual sound indicator The visual sound indicator has two functions. One is to show the sound level detected by the baby unit. The other one is to show the volume level during speaker volume setting. Sound level detected by the baby unit One to three green lights indicate a moderate sound level detected by the baby unit. Additional red lights indicate a higher sound level detected by the baby unit (e.g. baby crying loudly). Speaker volume level One to three green lights indicate Level 1 to Level 3 of the speaker volume setting. Additional red lights indicate Level 4 to Level 5 of the speaker volume setting. 2 LCD display 3 Microphone 4
5 VOLUME Press to adjust the speaker volume. While in a menu, press to scroll up or down. 6 SELECT While in a menu, press to choose an item, or save a setting. 7 Battery LED Light on when the battery is being charged. Light ashes when the battery is low and needs charging. Light off when the parent unit is running on AC power without battery installed, or the parent unit is running on battery only. 8 MENU/BACK Press to enter the menu. While in a menu, press to return to the previous menu. 9 Speaker 10 TALK Connection status the parent unit. displays when strong signal strength is detected between the baby unit and displays when moderate signal strength is detected between the baby unit and the parent unit. displays when the weak signal strength is detected between the baby unit and the parent unit. ashes when the link between the baby unit and the parent unit is lost. Night light On when the night light is turned on. Sound alert Displays when the sound alert of the parent unit is turned on. Flashes when there are loud sounds detected from the baby unit. Vibration alert Displays when the vibration alert of the parent unit is turned on. Flashes when there are loud sounds detected from the baby unit. Volume off Displays when the patient unit speaker volume is turned off. Battery status No battery icon displays when there is no battery installed. displays solid when the battery is fully charged. ashes when the battery is in low level and needs charging. animates when the battery is charging. Parent unit display screen messages LINKED The link between the parent unit and the baby unit is established. LOW BATTERY The parent unit uses only the rechargeable battery pack and it needs to be recharged. NOT LINKED The link between the parent unit and the baby unit is lost continuously for over 10 seconds. PAGING SAVED Both idle parent units are being paged by the baby unit. Your selection has been saved. SEARCHING The parent unit is out of range of the baby unit, or the baby unit is out of power. Press to power on, the screen turns on. Press and hold again to power off, the screen turns off. While in a menu, press to return to idle screen. 11 12 13 Press and hold to talk to the baby. TALK You are using the parent unit to talk to your baby. Power jack Belt clip Battery compartment cover Someone is using the other parent unit to talk to the baby, and the voice is also broadcasting to your parent unit. No sound will transmit from the baby unit to any parent unit during broadcasting.
(For DM221-2 only) Frequently asked questions Below are the questions most frequently asked about the baby monitor. If you cannot nd the answer to your question, visit our website at www.vtechphones.com or call for customer service. Why does the baby monitor not respond normally?
Try the following (in the order listed) for common cure:
1. Disconnect the power to the baby unit and the parent unit. 2. Remove the batteries in the parent unit. Then, install the batteries again. 3. Wait a few minutes before connecting power back to the baby unit and the parent unit. 4. Turn on the baby unit and the parent unit. 5. Wait for the parent unit to synchronize with the baby unit. Allow up to one minute for this to take place. Why doesnt the screen of the parent unit go on when I switch on the unit?
Perhaps the rechargeable battery of the parent unit is empty and the parent unit is not connected to the power. Insert the appliance plug into the parent unit and put the adapter in a wall socket. Why doesnt the POWER light of the baby unit go on when I switch on the unit?
Perhaps the baby unit is not connected to the power. Connect the baby unit to the power. Why does the baby monitor produce a high-pitched noise?
The units may be too close to each other. Make sure the parent unit and the baby unit are more than 3 feet (1 meter) away from each other. Why does the parent unit react too quickly to other sounds?
The baby unit also detects other sounds than those of your baby. Adjust the VOX sensitivity level to a lower level or adjust the speaker volume on the parent unit. Why dont I hear a sound/Why cant I hear my baby cry?
The volume of the parent unit may have set too low. Press VOLUME increase the volume level. to Why does the parent unit beep? If the sound alert feature is on, there is sound detected from the baby unit. You may have set a low VOX sensitivity level. See Adjust the sound sensitivity of the baby unit to change the setting. The baby unit may be out of range. Move the parent unit closer to the baby unit
(but not less than 3 feet). If the parent unit is powered by the provided battery, it may not have enough charge for the parent unit to perform normally. Charge the battery in the parent unit for up to 11 hours. The baby unit may be out of range. Move the parent unit closer to the baby unit
(but not less than 3 feet). Other electronic products may cause interference with your baby monitor. Try installing your baby monitor as far away from these electronic devices as possible. The battery may not be working. Contact our customer service to purchase a new battery. Why cant I establish a connection? Why is the connection lost every now and then? Why are there sound interruptions?
Why doesnt the battery icon shown on LCD display even I have properly installed the battery?
General product care To keep this product working well and looking good, follow these guidelines:
Avoid putting it near heating appliances and devices that generate electrical noise (for example, motors or fluorescent lamps). DO NOT expose it to direct sunlight or moisture. Avoid dropping the product or treating it roughly. Clean with a soft cloth. DO NOT immerse the parent unit and the baby unit in water and do not clean them under the tap. DO NOT use cleaning spray or liquid cleaners. Make sure the baby unit and parent unit are dry before you connect them to the mains again. FCC and IC regulations FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modications to this equipment not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian requirement:
CAN ICES-3 (B)/NMB-3(B) The RBRC seal Industry Canada This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. The term IC: before the certication/registration number only signies that the Industry Canada technical specications were met. This product meets the applicable Innovation, Science and Economic Development Canada technical specications. This equipment complies with Industry Canada RSS-102 with respect to Canada s Health Code 6 for Exposure of Humans to RF Fields. RF radiation exposure statement The device has been tested and complies with FCC and IC SAR limits. To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safety absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The baby unit shall be installed and used such that parts of all persons body are maintained at a distance of approximately 20 cm (8 inches) or more. For body worn operation, this parent unit has been tested and meets the FCC RF exposure guidelines when used with the accessories supplied or designed for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. The RBRC seal on the Ni-MH battery indicates that VTech Communications, Inc. is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful lives, when taken out of service within the United States and Canada. The program provides a convenient alternative to placing used Ni-MH batteries into the trash or municipal waste, which may be illegal in your area. VTechs participation makes it easy for you to drop off the spent battery at local retailers participating in the program or at authorized VTech product service centers. Please call for information on Ni-MH battery recycling and disposal bans/restrictions in your area. VTechs involvement in this program is part of its commitment to protecting our environment and conserving natural resources.
California Energy Commission battery charging testing mode This baby monitor meets the California Energy Commission (CEC) regulations for energy consumption. Your baby monitor is set up to comply with the energy-conserving standards right out of the box. Follow the instructions to install and charge the battery. The CEC battery charging testing mode is activated while charging. Even if the parent unit is paired to baby units, the CEC battery charging testing mode is activated while it is powered off and charging. Disclaimer and Limitation of Liability VTech Communications, Inc. and its suppliers assume no responsibility for any damage or loss resulting from the use of this users manual. VTech Communications, Inc. and its suppliers assume no responsibility for any loss or claims by third parties that may arise through the use of this product. Company: VTech Communications, Inc. Address: 9020 SW Washington Square Road - Ste 555 Tigard, OR 97223, United States Phone: 1 (800) 595-9511 in the U.S. or 1 (800) 267-7377 in Canada For cETL compliance only Mesures de scurit importantes La plaque signaltique applique se trouve dans le compartiment piles des units bb et parents. Lorsque vous utilisez votre appareil, vous devriez toujours suivre certaines mesures de prcaution de base an de rduire les risques dincendie, dlectrocution et de blessures corporelles, dont ceux qui suivent :
1. Observez toutes les instructions et mises en garde inscrites sur lappareil. Linstallation par un adulte est requise. 2. 3. MISE EN GARDE: Ninstallez pas lunit du bb une hauteur 4. suprieure 2 mtres. Ce produit ne remplace pas la surveillance adulte du nourrisson. La supervision du nourrisson est la responsabilit du parent ou de la personne qui soccupe de lenfant. Ce produit pourrait cesser de fonctionner et, par consquent, vous ne devriez pas prsumer quil continuera de fonctionner correctement pendant une priode de temps donne. De plus, il ne sagit pas dun instrument mdical et ne devrait pas tre utilis comme tel. Ce produit est destin vous aider superviser votre bb. 5. Nutilisez pas cet appareil prs de leau ni de toute autre source dhumidit, par exemple, prs dune baignoire, cuve lessive, vier de cuisine, dans un sous-sol humide ni prs dune piscine, dans un soussol humide ou une douche. 6. MISE EN GARDE: Nutilisez que la pile fournie. Il peut y avoir un risque dexplosion si un mauvais type de pile est utilis pour le dispositif apaisant. La pile ne peut pas tre soumise a des tempratures extrmes leves ou basses et a une faible pression atmosphrique a haute altitude pendant son utilisation, son entreposage ou son transport. Le fait de jeter la pile dans au feu ou dans un four chaud, ou dcraser ou de couper mcaniquement la pile peut entrainer une explosion. Le fait de laisser la pile dans un environnement a temprature extrmement leve peut entrainer une explosion ou une fuite de liquide ou de gaz inammable. Une pile soumise a une pression dair extrmement basse peut provoquer une explosion ou une fuite de liquide ou de gaz inammable. Mettez au rebut la pile usage conformment aux informations gurant dans la section Le sceau RBRC. 7. Nutilisez que les adaptateurs inclus avec ce produit. Lutilisation dun adaptateur dont la polarit ou la tension serait inadquate risque dendommager srieusement le produit et mettre Informations sur les adaptateurs lectriques :
Sortie : 6 V CC 400mA. VTech Telecommunications Ltd. Modle : VT05EUS06040 Informations sur les piles rechargeables :
2.4V 750mAh Ni-MH battery YIYANG CORUN BATTERY CO LTD. Model: NI-MHAAA750*2 Lorsquils sont branchs dans une prise de courant, les adaptateurs secteur ont t conus pour tre orients correctement, soit la verticale ou au plancher. Les broches nont pas t conues pour supporter le poids du bloc dalimentation et le maintenir en place si celuici est branch dans une prise au plafond, sous une table ou dans un meuble. Pour les PRODUITS BRANCHER UNE PRISE DE COURANT, la prise de courant doit tre installe prs du produit, an dassurer une accessibilit scuritaire la prise de courant. 8. 9. 10. Dbranchez ce produit de la prise de courant avant de procder au nettoyage. Nutilisez pas de nettoyants en arosols. Utilisez un chiffon humide pour le nettoyer. 11. Dbranchez les cordons dalimentation avant de remplacer le bloc-piles. 12. Ne coupez pas les cordons dalimentation pour remplacer les ches, car ceci peut prsenter un danger potentiel. 13. Ne laissez aucun objet reposer ni appuyer sur le cordon dalimentation. Ninstallez pas cet appareil dans un endroit o lon risque dcraser le cordon dalimentation ou de le pitiner. 14. Ne faites fonctionner cet appareil quavec le type dalimentation indiqu sur ltiquette. Si vous ne connaissez pas le type dalimentation que vous possdez votre domicile, consultez votre marchand ou votre compagnie locale dlectricit. 15. Ne surchargez pas les prises de courant murales ni les rallonges lectriques. 16. Ne placez pas cet appareil sur un chariot, meuble, trpied, 17. support de montage ni table chancelants. Les trous et ouvertures du botier, situs larrire de lappareil ou sous celui-ci, servent arer lappareil. Pour lempcher de surchauffer, ne bloquez sous aucun prtexte ces ouvertures et nempchez pas laration adquate de lappareil en le plaant sur un lit, divan, tapis ou toute autre surface similaire. De mme, ne le positionnez pas proximit ni au-dessus dune source de chaleur ou dun calorifre. De plus, ne placez pas lappareil dans un endroit avant de vous assurer quil y ait une bonne circulation dair. 18. Nenfoncez jamais dobjets travers les ouvertures de cet appareil, car ils pourraient entrer en contact avec des points de tension dangereux ou causer des courts-circuits qui peuvent dgnrer en incendies ou en risques dlectrocution. Ne renversez jamais de liquide dans ce produit. 19. An de rduire les risques dlectrocution, ne dmontez pas cet appareil, mais apportez-le dans un centre de service autoris. Louverture du botier ou le retrait de toutes pices que contient cet appareil, lexception de laccs autoris certaines portes ou ouvertures, risque de vous exposer des points de tension dangereux ou dautres dangers. Un remontage incorrect peut par la suite prsenter des risques dlectrocution. 20. Vous devriez tester la rception chaque fois que vous mettez lappareil en fonction. 21. Examinez les composantes an de vrier si celles-ci ne sont pas 22. endommages. Il existe un trs faible risque de perte de condentialit avec certains appareils lectroniques (autres coute-bbs, tlphones sans ls etc.). Pour lviter, sassurer que le produit na jamais t utilis avant lachat, rinitialiser lunit de faon priodique, teindre lcoute-bb quand il nest pas en cours dutilisation. 23. Les enfants devraient tre superviss an de vous assurer quils ne jouent pas avec lappareil. 24. Le produit nest pas conu pour tre utilis par des personnes
(incluant des enfants) aux capacits physiques, sensorielles ou mentales rduites ou qui manquent dexprience et de connaissances, moins quon leur ait donn sufsamment de supervision ou dinstructions relativement lutilisation de lappareil par une personne responsable de leur scurit. CONSERVEZ CES INSTRUCTIONS Mises en garde 1. Utilisez et entreposez le produit une temprature entre 0C
(32F) et 40C (104F). 2. Nexposez pas cet appareil des froids ou des chaleurs extrmes, ainsi qu la lumire directe du soleil. Ne linstallez pas prs dune source de chauffage. Le bloc-piles ne doit pas tre expos la chaleur excessive telle que la lumire du soleil ou au feu. 3. 4. Avertissement - Risque de strangulation
- Les enfants se sont TRANGLS dans des cordons. Gardez ce cordon hors de porte des enfants ( plus de 0,9 m). Nenlevez pas cette tiquette. 5. Ne jamais placer le moniteur lintrieur du berceau ou du parc de bb. Ne jamais couvrir le moniteur ou lunit (s) portative avec un article tel une serviette ou une couverture. 6. Dautres quipements lectroniques peuvent produire des interfrences sur votre moniteur vido et audio. Tentez dinstaller votre moniteur vido ou audio lcart des appareils lectroniques tels que des routeurs sans fil, radios, tlphones cellulaires, interphones, moniteurs, tlphones, ordinateurs personnels, lectromnagers et tlphones sans fil. Stimulateurs cardiaques implants dans lorganisme Les simulateurs cardiaques (ne sapplique quaux dispositifs numriques sans fil) :
Lorganisme Wireless Technology Research, LLC (WTR), une firme de recherche indpendante, a men une valuation pluridisciplinaire des interfrences entre les tlphones sans fil portatifs et les stimulateurs cardiaques implants dans lorganisme. Appuye par lAdministration des aliments et drogues (FDA) des tats-Unis, la firme WTR recommande aux mdecins:
Avis aux dtenteurs de stimulateurs cardiaques Vous devriez maintenir les dispositifs sans fil au moins six pouces du simulateur cardiaque. Ils ne doivent PAS placer le tlphone sans fil directement sur le stimulateur cardiaque, tel que dans une poche de chemise, lorsque celui-ci est en marche. Ltude effectue par lorganisme WRS na pas identifi de risque pour les dtenteurs de simulateurs cardiaques causs par les gens qui utilisent dispositifs sans fil proximit de ceux-ci.
Ce produit de VTech est conforme toutes les normes se rapportant aux champs lectromagntiques (EMF) standard. Si vous le manipulez correctement en suivant les instructions de ce guide, son utilisation sera scuritaire pendant de nombreuses annes, selon les meilleures vidences scientifiques dont nous disposons aujourdhui. Limited warranty What does this limited warranty cover?
The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase (Consumer or you) that the Product and all accessories provided in the sales package (Product) are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the Product operating instructions. This limited warranty extends only to the Consumer for Products purchased and used in the United States of America and Canada. What will VTech do if the Product is not free from defects in materials and workmanship during the limited warranty
During the limited warranty period, VTechs authorized service representative will replace at VTechs option, without charge, a Materially Defective Product. If we choose to replace the Product, we may replace it with a new or refurbished Product of the same or similar design. We will retain defective parts, modules, or equipment. Replacement of the Product, at VTechs option, is your exclusive remedy. VTech will return the replacement Products to you in working condition. You should expect the replacement to take approximately 30 days. How long is the limited warranty period?
The limited warranty period for the Product extends for ONE
(1) YEAR from the date of purchase (90 days on products purchased as Refurbished*). This limited warranty also applies to the replacement Product for a period of either (a) 90 days from the date the replacement Product is shipped to you or (b) the time remaining on the original one-year warranty (90-day limited warranty on products that are purchased as Refurbished*); whichever is longer.
*Refurbished products purchased from our online store carry a 90-day replacement warranty. What is not covered by this limited warranty?
This limited warranty does not cover:
1. Product that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, re, water or other liquid intrusion; or 2. Product that has been damaged due to repair, alteration or modication by anyone other than an authorized service representative of VTech; or 3. Product to the extent that the problem experienced is caused by signal conditions, network reliability, or cable or antenna systems; or 4. Product to the extent that the problem is caused by use with non-VTech accessories; or 5. Product whose warranty/quality stickers, product serial number plates or electronic serial numbers have been removed, altered or rendered illegible; or 6. Product purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for commercial or institutional purposes (including but not limited to Products used for rental purposes); or 7. Product returned without a valid proof of purchase (see item 2 below); or 8. Charges for installation or set up, adjustment of customer controls, and installation or repair of systems outside the unit. How do you get warranty service?
To obtain warranty service in the USA, please visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377. NOTE: Before calling for service, please review the users manual - a check of the Products controls and features may save you a service call. Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the Product(s) to the service location. VTech will return replaced Product under this limited warranty. Transportation, delivery or handling charges are prepaid. VTech assumes no risk for damage or loss of the Product in transit. What must you return with the Product to get warranty service?
1. Return the entire original package and contents including the Product to the VTech service location along with a description of the malfunction or difculty; and 2. Include a valid proof of purchase (sales receipt) identifying the Product purchased (Product model) and the date of purchase or receipt; and 3. Provide your name, complete and correct mailing address, and telephone number. Other limitations This warranty is the complete and exclusive agreement between you and VTech. It supersedes all other written or oral communications related to this Product. VTech provides no other warranties for this Product. The warranty exclusively describes all of VTechs responsibilities regarding the Product. There are no other express warranties. No one is authorized to make modications to this limited warranty and you should not rely on any such modication. State/Provincial Law Rights: This warranty gives you specic legal rights, and you may also have other rights, which vary from state to state or province to province. Limitations: Implied warranties, including those of tness for a particular purpose and merchantability (an unwritten warranty that the Product is t for ordinary use) are limited to one year from the date of purchase. Some states/
provinces do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event shall VTech be liable for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost prots or revenue, inability to use the Product or other associated equipment, the cost of substitute equipment, and claims by third parties) resulting from the use of this Product. Some states/provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Please retain your original sales receipt as proof of purchase.
1 | Label Artwork and Location | ID Label/Location Info | 208.04 KiB | February 28 2023 |
DM221 Label DM221-2 Label S/N label 92-038167-010-100 Size: 28*26 mm Materials :50# UL Approved PET SN Info. Printed by VTT barcode room S/N label 92-038168-010-100 Size: 29.5*10 mm Materials :50# UL Approved PET SN Info. Printed by VTT barcode room S/N label 92-038169-010-100 Size: 28*26 mm Materials :50# UL Approved PET SN Info. Printed by VTT barcode room S/N label 92-026170-010-100 Size: 29.5*10 mm Materials :50# UL Approved PET SN Info. Printed by VTT barcode room e s U y l n o d e i l p p u S r e t p a d A Model: DM221 BU MANUFACTURED IN CHINA VTech Customer Service 1-800-595-9511 FCC ID: EW780-8180-00A HVIN: 35-202050BU IC: 1135B-80818000A S/N: XXXXXXXXXXX Model: DM221 PU FCC ID: EW780-8180-01A HVIN: 35-202049PU IC: 1135B-80818001A S/N: XXXXXXXXXXX e s U y l n o d e i l p p u S r e t p a d A Model: DM221-2 BU MANUFACTURED IN CHINA VTech Customer Service 1-800-595-9511 FCC ID: EW780-8180-00A HVIN: 35-202050BU IC: 1135B-80818000A S/N: XXXXXXXXXXX Model: DM221-2 PU FCC ID: EW780-8180-01A HVIN: 35-202049PU IC: 1135B-80818001A S/N: XXXXXXXXXXX ETL label 92-038171-010-100 Size: 8.6*12 mm Materials :50# UL Approved PET ETL label 92-038171-010-100 Size: 8.6*12 mm Materials :50# UL Approved PET Baby unit Parent unit Baby unit Parent unit
1 | Attestation | Attestation Statements | 110.21 KiB | February 28 2023 |
Attention: Application Examiner Re: Covered List, located at https://www.fcc.gov/supplychain/coveredlist and 47 CFR parts 2.903 and 2.911(d)(5)(ii) of the FCC rules Applicant: VTech Telecommunications Ltd. FCC ID: EW780-8180-01A To whom it may concern, VTech Telecommunications Ltd. certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to 47 CFR part 2.903 of the FCC rules and does not originate directly or indirectly from any company named on the covered list located in the link above or any subsidiary or affiliate thereof. Applicant further certifies that, as of the date of the filing of the application, the Applicant is not identified on the Covered List as an entity producing covered equipment and is not a subsidiary or affiliate of any such entity pursuant to 47 CFR part 1.50002 and required by 47 CFR part 2.911(d)(5)(ii) of the FCC rules. I HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Applicant and agree to immediately notify Intertek if there is any change in the status identified above. ______________________________
[Signature of authorized Proprietor, Partner or Authorized Officer]
Mr. Michael Tsui Approbation Supervisor VTech Telecommunications Ltd. 17 February 2023 Form: RFT-AMER-TCB-OP-19n Date: 1/25/2023 Revision: 1 Page 1 of 1
1 | Confidentiality Request | Cover Letter(s) | 25.26 KiB | February 28 2023 |
VTech Telecommunications Ltd Aug 31, 2022 To whom it may concern, Request for Permanent Confidentiality Under FCC Part 15 Certification FCC ID: EW780-8180-01A Request is hereby submitted by VTech Telecommunications Ltd. to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential and VTech Telecommunications Ltd. reserves the right to discern which parties can obtain access to these information:
Schematics Detailed Block diagrams Detailed Operational/Functional Description The rationale for request for confidentiality is as followings:
This information represents intellectual property of VTech Telecommunications Ltd. and it is subject to competition. We have invested considerable time and materials in research and development to produce the referenced product. Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. If you have questions or need further information, please contact the undersigned. Regards, Michael Tsui Approbation Supervisor
1 | Letter of Agency | Cover Letter(s) | 23.35 KiB | February 28 2023 |
Appendix B1 Letter of Agency for FCC Certification Aug 31, 2022 To whom it may concern, Letter of Agency I, an officer of VTech Telecommunications Limited do hereby authorize Intertek Testing Services (Mr. Tim ST Lee/ Kenneth Wong/ Mrs. Jess Tang) to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under Part 15 and/or Part 95 of the FCC Rules until further notice. I further certify that no party (as defined in 1.2002(b) of CFR 47, 2004) to this application, including myself, is subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C., 862. Regards, Michael Tsui Approbation Supervisor
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2023-02-28 | 1921.536 ~ 1928.448 | PUT - Part 15 Unlicensed PCS portable Tx worn on body | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2023-02-28
|
||||
1 | Applicant's complete, legal business name |
VTech Telecommunications Ltd
|
||||
1 | FCC Registration Number (FRN) |
0015973951
|
||||
1 | Physical Address |
23/F Tai Ping Ind Center Block 1 57 Ting Kok Rd
|
||||
1 |
23/F Tai Ping Ind Center Block 1
|
|||||
1 |
Tai Po NT, N/A
|
|||||
1 |
Hong Kong
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
T******@intertek.com
|
||||
1 | TCB Scope |
A3: Unlicensed Personal Communication System (PCS) devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
EW7
|
||||
1 | Equipment Product Code |
80-8180-01A
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
M****** T********
|
||||
1 | Title |
Approbation Supervisor
|
||||
1 | Telephone Number |
852-2********
|
||||
1 | Fax Number |
852-2********
|
||||
1 |
m******@vtech.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Intertek Testing Services Hong Kong Ltd.
|
||||
1 | Name |
K**** W********
|
||||
1 | Physical Address |
2/F., Garment Centre
|
||||
1 |
Hong Kong
|
|||||
1 | Telephone Number |
+8523********
|
||||
1 | Fax Number |
(852)********
|
||||
1 |
k******@intertek.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
Intertek Testing Services Hong Kong Ltd.
|
||||
1 | Name |
K******** W****
|
||||
1 | Physical Address |
2/F., Garment Centre
|
||||
1 |
Hong Kong
|
|||||
1 | Telephone Number |
+8523********
|
||||
1 | Fax Number |
(852)********
|
||||
1 |
k******@intertek.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | PUT - Part 15 Unlicensed PCS portable Tx worn on body | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Audio Baby Monitor - Parent Unit | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | Yes | ||||
1 | Grant Comments | Output power listed is conducted. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This device must transmit with a source-based time-averaging duty factor as described in this filing. This device has been tested for SAR compliance for head configuration. SAR compliance for body-worn operating configurations is limited to the specific belt clip tested for this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR value is < 0.10 W/kg. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Intertek Testing Services Hong Kong Ltd.
|
||||
1 | Name |
B******** C****
|
||||
1 | Telephone Number |
85221********
|
||||
1 | Fax Number |
85227********
|
||||
1 |
b******@intertek.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15D | 1921.53600000 | 1928.44800000 | 0.0826000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC