FCC ID: EW780-5744-10 Cordless Telephone Base Transceiver

Appendix FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical require-

ments adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US: AAAEQ##TXXXX. This identifier must be provided to your local telephone company upon request. The plug and jack used to connect this equipment to premises wiring and the tele-

phone network must comply with applicable Part 68 rules and technical requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also com-

pliant. An RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two lines. See Installation Instructions in the users manual. The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone line and still have them ring when you are called. The REN for this product is encoded as the 6th and 7th characters following the US: in the product identifier (e.g., if ## is 03, the REN is 0.3). In most, but not all areas, the sum of all RENs should be five (5.0) or less. For more information, please contact your localtelephone company. This equipment may not be used with Party Lines. If you have specially wired alarm dial-

ing equipment connected to your telephone line, ensure the connection of this equip-

ment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents. For repair procedures, follow the instructions outlined under the Limited Warranty. If this equipment is causing harm to the telephone network, the telephone com-

pany may temporarily discontinue your telephone service. The telephone company is required to notify you before interrupting service. If advance notice is not practical, you will be notified as soon as possible. You will be given the opportunity to correct the problem and the telephone company is required to inform you of your right to file a complaint with the FCC. Your telephone company may make changes in its facilities, equipment, operation, or procedures that could affect the proper functioning of this product. The telephone company is required to notify you if such changes are planned. If this product is equipped with a corded or cordless handset, it is hearing aid compat-

ible. 36 Appendix FCC Part 15 If this product has memory dialing locations, you may choose to store emergency telephone numbers (e.g., police, fire, medical) in these locations. If you do store or test emergency numbers, please:

Remain on the line and briefly explain the reason for the call before hanging up. Perform such activities in off-peak hours, such as early morning or late evening. This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission

(FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equip-

ment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to cor-

rect the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the Increase the separation between the equipment and receiver. receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The handset may be safely held against the ear of the user. The base unit shall be installed and used such that parts of the users body other than the hands are maintained at a distance of approximately 20 cm (8 inches) or more. If you choose to use a clipping device, please make sure to only use the supplied AT&T belt clip. 37

User Manual 2.4 GHz Cordless Telephone E2116 with Caller ID & Call Waiting MUTE CHAN REDIAL Congratulations on your purchase of this AT&T product. Before using this telephone system, please read Important Safety Instructions in the Appendix of this manual. NEED HELP?

Our representatives are here to help you with any questions concerning the operation of this product, available accessories, or any other related issues. Call Toll Free 1 (800) 222-3111 In Canada, Call 1 (866) 288-4268 or visit our website at www.telephones.att.com AT&T E2116 Model No.:

Product Name: 2.4 GHz Cordless Telephone Serial No.:

Purchase Date:

Dealer:

SN:

(found at the bottom of the base unit) IMPORTANT Information about Caller ID with Call Waiting This product has a Caller ID with Call Waiting feature that works with service from your local phone service provider. Caller ID with Call Waiting lets you see whos calling before you answer the phone, even when youre on another call. You may need to change your phone service to use this feature. Contact your phone service provider if:

You have both Caller ID and Call Waiting, but as separate ser-

vices (you may need combined service). You have only Caller ID service, or only Call Waiting service. You dont subscribe to any Caller ID or Call Waiting services. You can use this product with regular Caller ID service, you can use this products other features without subscribing to either Caller ID or combined Caller ID with Call Waiting service. There are fees for Caller ID services, and they may not be available in all areas. Depending on your service subscription, you may see the callers number, or the callers name and number. This product can provide information only if both you and the caller are in areas offering Caller ID service, and if both telephone companies use compatible equipment. The time and date are sent by the service provider along with the call information. Copyright 2005 Advanced American Telephones. All Rights Reserved. AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones. You must install and charge the battery before using the telephone. STOP! See page 7 for easy instructions. For customer service or product information, visit our web site at www.telephones.att.com or call 1-800-222-3111. In Canada, call 1-866-288-4268. Please also read Important Product Information on page 32. CAUTION: To reduce the risk of fire or injury to persons or damage to the telephone, read and follow these instructions carefully:

Use only replacement battery model 3301(Part number 80-5071-00-00 or AT&T SKU 23403).

Do not dispose of the battery in a fire, it could explode. Check with local codes for special disposal instructions.

Do not open or mutilate the battery. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.

Exercise care in handling batteries in order not to create a short circuit with conducting materials such as rings, bracelets, and keys. The battery or conduc-

tor may overheat and cause harm.

Charge the battery provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual.

Observe proper polarity orientation between the battery and battery charger. Do not disassemble your telephone. There are no user-serviceable parts inside. Refer for servicing to qualified service personnel. Copyright 2005 Advanced American Telephones. All Rights Reserved. AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones. User Manual 2.4 GHz Cordless Telephone E2116 with Caller ID & Call Waiting MUTE CHAN REDIAL Table of contents Getting Started Quick reference guide ........................ 2 Parts checklist ...................................... 4 Before you begin .................................. 5 Telephone base installation ................ 6 Battery installation & charging .......... 7 Wall mounting ...................................... 8 Belt clip & optional headset .............. 9 Telephone Operation Handset Operation ...........................10 Handset Settings ................................12 Base Operation ..................................13 Messages Waiting ...............................14 Speed Dial ...........................................16 Directory Store/Edit an entry ............................19 Delete/Move an entry to Speed Dial

................................................................20 Dial a number from the Directory ...20 Caller ID Log How Caller ID works .......................21 To review the call log ........................23 Appendix Troubleshooting .................................28 Important Product Information ..... 33 Save /these Instructionsn ................. 34 FCC Part 68 and ACTA .... ..............36 FCC Part 15 ....................................... 37 Limited Warranty .............................. 38 Technical Speci cations .................... 41 1 Getting Started Quick reference guide Handset CID While on a call, press to lower the volume. A double beep will sound when you reach the lowest setting. While the phone is not in use, press to display caller ID information. While entering names or numbers into memory, press to delete last character entered. PHONE/FLASH Press to make or answer a call or dial the number (use to backspace and make corrections), then press PHONE to call. During a call, press to put current call on hold and receive an incoming call, if call waiting service is subscribed. MUTE While on a call, press to mute micro-

phone. SPEAKER MUTE CHAN REDIAL Press to activate handset speakerphone. Press again to resume normal handset use

(earpiece). Feature menu MENU SELECT Press to display menu, or to select high-

lighted item from menu. While on a call, press to increase the volume. A double beep will sound when you reach the highest setting. While the phone is not in use, press to display directory entries. While entering names or numbers, press to add a space. DIR OFF While on a call, press to temporarily mute the ringer. While using menus, press to cancel an operation, back up, or exit the menu display. When ringing, press to temporarily mute the ringer. CHAN/DEL While on a call, press CHAN to switch to a different channel for better reception. When viewing the call log, press to delete the current record. While handset is in idle mode, press and hold to delete all records in the call log. Redial/Pause Press to view redial memory. While entering numbers, press and hold to insert a dialing pause. DIRECTORY MENU SELECT Feature Menu DIRECTORY.................See page 19 SPEED DIAL.................See page 16 RINGER TYPE..............See page 12 RINGER VOLUME ........See page 12 DATE/TIME ...................See page 12 DIAL MODE ..................See page 12 MESSAGE WAITING....See page 12 LANGUAGE.... .............See page 12 2 or Press through menu items. to scroll Press SELECT to select or modify a highlighted item. Press OFF to cancel an operation, return to the previous menu, or exit the menu display. Getting Started Quick reference guide Telephone Base New Voicemail If you subscribe to telephone company voicemail with a visual message waiting signal, this light ashes, and MESSAGE WAITING displays on the handset screen when you have voicemail waiting. Charge/In Use Flashes slowly when the handset is in use. Glows steadily when the handset is charging in its base. Flashes in cadence with incoming ringing. Handset Locator Press to page the handset. Press again, press OFF on handset, or place handset in the base to cancel the page. 3 Getting Started Parts checklist Remember to save your sales receipt and original packaging in case you ever need to ship your telephone for warranty service. Check to make sure the telephone package includes the following:

a. Telephone base b. Telephone handset c. Power adaptor MUTE CHAN REDIAL e. Belt clip f. Telephone line cord d. Wall mount bracket a. Telephone base b. Telephone handset c. Power adaptor d. Wall mount bracket e. Belt clip f. Telephone line cord g. Battery pack g. Battery pack 4 Telephone operating range This cordless telephone operates within the maximum power allowed by the Federal Communications Commission

(FCC). Even so, this handset and base can only communicate over a certain distance which can vary with the locations of the base and handset, the weather, and the construction of your home or office. If there is a call while the handset is out of range, the handset might not ring or if it does ring, the call might not connect well when you press PHONE. Move closer to the base, then press PHONE to answer the call. If the handset moves out of range during a phone conversation, there may be interference on the line. To improve reception, move closer to the base. If you move out of range without pressing OFF, your phone will be left off the hook. To hang up properly, walk back toward the telephone base, peri-

odically pressing OFF until the call is disconnected. Note: For better reception while on the line, press CHAN/DEL button until all interference is elimi-

nated. Getting Started Before you begin About Caller Identification Caller ID with Call Waiting features in this telephone let you see whos call-

ing before you answer the phone, even when youre on another call. These fea-

tures require services provided by your local telephone company. Contact your telephone service pro-

vider if:

You have both Caller ID and Call Waiting, but as separate services

(you may need combined service) You have only Caller ID service, or only Call Waiting service You dont subscribe to any Caller ID or Call Waiting services. You can use this phone with regular Caller ID service, and you can use its other features without subscribing to either Caller ID or combined Caller ID with Call Waiting service. There may be fees for these services, and they may not be available in all areas. Caller ID features will work only if both you and the caller are in areas offering Caller ID service, and if both telephone companies use compatible equipment. See Caller ID, on page 20, for more details about how these features work. 5 Getting Started Telephone base installation IMPORTANT! FOR MAXIMUM PERFORMANCE OF YOUR CORDLESS TELEPHONE SYSTEM:

1. Choose a central location for your base unit. 2. Install your base unit and extension handsets away from electronic equipment, such as personal com-

puters, television sets and microwave ovens. 3. In locations where there are multiple cordless telephones, separate the base units as far away as possible. 4. Install your telephone equipment away from heat sources and sunlight. 5. Avoid excessive moisture, dust or extreme cold. Install the telephone base as shown below. Plug power adaptor into electrical outlet. Plug telephone line cord into telephone jack. NOTE: Use only the power cord supplied with this product. If you need a replacement, call 1-800-2223111 in the U.S. In Canada, call 1-866-288-4268. Be sure to use an electrical outlet not controlled by a wall switch. 6 Getting Started Battery installation & charging After battery installation, place the handsets in the base unit or charger and allow to charge for at least 16 hours before use.You can keep the batteries charged by returning the handsets to the base unit or charger after each use. Recharging of a fully depleted bat-

tery may take up to 14 hours. A fully charged battery could provide up to 5 hours of talk time, or 8 days of standby time. Actual battery life depends on usage condition and age of battery. NEEDS RECHARGING Low battery indicator. Return handset to base or charger to recharge when this symbol flashes.

(Handset will beep when battery is low.) Insert supplied bat-

tery. Ensure the plug on the battery pack is securely inserted into the socket of the com-

partment according to the colour-coded label. Caution: Use only the supplied rechargeable battery or AT&T replacement battery model 3301 (SKU 23403, Part number 80-5071-00-00). Replace compartment cover. Place handset in base or charger to charge for at least 16 hours before first use. Press tab to open battery compartment. Plug charger power cord into jack on under-

side of charger, then plug power adaptor into electrical outlet. MUTE CHAN REDIAL 7 Getting Started Wall mounting The line cord of the base unit can be plugged into any standard wall-phone outlet as shown below. Choose a location away from electronic equipment such as personal com-

puters, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture. Install the line cord as shown in the diagram. Connect cords as shown on page 6, then press and slide the cords down firmly so the base is held securely on outlet mounting pegs. Plug power adaptor into electrical outlet. Plug telephone line cord into telephone jack. Clip wall-mount bracket securely into notches on underside of base. 8 Getting Started Belt clip & optional headset Install belt clip as shown below if desired. For hands-free telephone conversations, use any industry standard 2.5 mm headset

(available separately). For best result, use an AT&T 2.5 mm headset. Snap belt clip into notches on side of handset. Rotate and pull to remove. Plug 2.5 mm headset into jack on side of handset (beneath small rubber cap). MUTE CHAN REDIAL 9 D A Flash B MUTE CHAN REDIAL C Telephone Operation Handset Operation Making a Call Press PHONE (A) or SPEAKER (B), then dial the number.

-OR-

Dial the number (use tions), then press PHONE (A) or SPEAKER (B) to call. to backspace and make correc-

Call Waiting During a call, press FLASH (A) to receive the new incom-

ing call if call waiting is activated. E Channel Press CHAN (C) to switch to a clear channel without interference while on a call. Deleting When viewing the call log, press DEL (C) to delete the current record displayed. While the handset is in idle mode, press and hold to delete all records in the call log. Answer a Call Press any key (except OFF) to answer a call.

/DIR

/CID and

/CID (D) While on a call, press to lower the volume. A double beep will sound when you reach the lowest setting. While the phone is not in use, press to display caller ID information. While entering names or numbers into memory, press to delete the last character entered.

/DIR (E) While on a call, press to increase the volume. A double beep will sound when you reach the highest setting. While the phone is not in use, press to display direc-

tory entries. While entering names or numbers, press to add a space. 10 H G E A B MUTE CHAN REDIAL C F D Telephone Operation Handset Operation MENU/SELECT Press (A) to display menu, or to select highlighted item from menu. Off During a call, press (B) to hang up. While using menus, press to cancel an operation, back up, or exit the menu display. Press OFF (B) to temporarily mute the ringer during an incoming call. Redial/Pause Press (C) to view redial memory. While entering numbers, press and hold to insert a dialing pause. Press REDIAL/

PAUSE (C) to display the last telephone number (up to 32 digits) dialed from the handset, then press PHONE (H) or SPEAKER (E) to dial that number again. Speaker To answer a call, press SPEAKER (E). To make a call, press SPEAKER (E), then dial a number. During a call, press SPEAKER (E) to toggle between the hands-free speakerphone and regular handset use. Press OFF (B) to hang up. Mute Press MUTE (F) to silence the microphone so that the caller could not hear your conversation with a third party, but you can still hear the caller. Press MUTE (F) again to resume your telephone conversation normally. Tone If you have pulse dial (rotary) service, you can switch to touch tone dialing during a call by pressing TONE * (G). This can be useful when sending tone signals for access to answering systems or long distance services. 11 Telephone Operation or and SELECT to SELECT, then use the or SELECT to select the appropriate one. Handset Settings From the feature menu, you can change settings to customize how the telephone works. Press MENU buttons to scroll to the feature to be changed. Press OFF anytime to cancel an operation, back up to the previous menu, or exit the menu display. Ringer Type The Ringer Type allows you to choose one of 4 ringer tones for incoming calls or buttons to sample each ringer tone, then press MENU intercom calls. Use the select the appropriate one. Ringer Volume Set the default ring volume level (1-3), or turn the ringer off. Use the to same each volume level, then press MENU Date/Time This feature sets the date and time on the LCD display of the handset. Press MENU enter the menu. Press and time. Use the or date, the hour, the minute, and AM/PM accordingly. Dial Mode This feature allows you to choose tone dial or pulse dial. Change to PULSE dial only if buttons to select TONE you do not have tone-dial service in your area. Use the or PULSE, then press SELECT to save your preference. Message Waiting If you subscribe to the voicemail service provided by your local telephone company, you will receive a text message on the handset when there is new voicemail. To manu-

ally remove the VOICEMAIL message on the display:

Press MENU. or Press Press SELECT. When asked to con rm, press to remove the indication, or press OFF to exit with-

or buttons to change the month, then press MENU until DATE/TIME is displayed. Press MENU until MESSAGE WAITING is displayed. SELECT to SELECT to set the date SELECT to set the buttons or out changing. NOTE: This only turns off the displayed message on the handset. It does not delete your voicemail messages. or Language The feature allows you to select the default language used in all menus and screen dis-

buttons to select English or Spanish, then press SELECT to save plays. Use the your preference. Handset locator If you misplace the handset, press HANDSET LOCATOR at the base. The handset will beep for 60 seconds to help you locate it. To stop the beeping, press PHONE, SPEAKER, or any dial pad button on the handset, or press HANDSET LOCATOR at the base. 12 Telephone Operation Base Operation New Voicemail If you subscribe to the voice mail service with a visual message waiting signal from your telephone company, this light flashes, and MESSAGE WAITING is displayed on the screen of the handset when there is voicemail waiting. Handset Locator Press to page the handset. Press again, press OFF on handset, or place handset in the base to cancel the page. Charge/In use Indicator Flashes slowly when the handset is in use. Glows steadily when the handset is charging in its base. Flashes in cadence with an incoming ringing. 13 Telephone Operation Messages Message Waiting Your phone is designed to work with most local and regional telephone service providers voice messaging systems, providing alerts on both the handset and base unit when new messages come in. Voice messaging is a subscription service available through most service providers for a monthly fee. Contact your local telephone company for more information. When a caller leaves a message in your voice mailbox, the MESSAGE WAITING light on the base unit will flash. In addition, the handset will display MESSAGE WAITING with the date and the time of the incoming call. Clear Message Waiting Alert After you review your message(s) if the message waiting alert does not go off, you may manually turn it off. MESSAGE WAITING 5/01 5:40 PM CLEAR? YES Press MENU Press or SELECT to activate the menu. until the screen displays MESSAGE WAITING. Press SELECT, the screen displays: CLEAR ? YES Press Press SELECT to con rm the desired setting. A con rmation tone will sound. to select YES or NO. or 14 Telephone Operation Messages Display Screen Messages Screen Display:

When:

** RINGING **

There is a call coming in. CONNECTING... The handset is waiting for a dial tone. PHONE ON The handset is in use. MESSAGE WAITING There is have new voicemail.

** PAGING **

NEEDS RECHARG-

ING SCANNING... CANT CONNECT RINGER OFF MUTE SPEAKER The base is paging the handset. The battery needs to be recharged. The handset is changing to one of the 30 channels for better reception. Displays when base power is off and PHONE is pressed. Youll also hear an error tone. Displays when an out-of-range dial fails to connect. The handset ringer is turned off. The microphone on the handset is muted. The handset is in SPEAKERPHONE mode. 15 Telephone Operation Speed Dial Your phone can store up to nine telephone numbers with names (up to 15 characters and 24 digits in each loca-

tion) into the speed dial memory locations you assign (1 through 9). You can also store telephone numbers with names alphabetically in the directory. See Tele phone Di rec to ry for instructions. or Store a Number/Name in Speed Dial Press MENU / SELECT on the handset. Press Press SELECT. The screen displays ENTER 1-9. until the screen displays SPEED DIAL. Press the desired key (1 through 9) for the memory location to store this entry. The screen displays ENTER NAME. Using the chart below, enter up to 15 characters for the name you are storing with the number. Use to backspace and make corrections; use and add a space. to advance NOTE: The entries stored in speed dial memory will be marked as 01 through 09 in the telephone directory. Press OFF anytime to exit the speed dial mode. When the memory is full, the screen displays MEMORY FULL, an error tone sounds, and you cannot store any new number until you delete a record from the speed dial memory or the directory. If the location is not empty, your new entry will be stored in place of the old and the first entry will be deleted. Take caution not to overwrite existing entries you do not wish to delete from memory. Press Dial Key 1 2 3 4 5 6 7 8 9 0

Once Twice 3 Times 4 Times 5 Times 6 Times C F I L O R V Y

, 2 3 4 5 6 S 8 Z

7 9

1 A D G J M P T W 0

B E H K N Q U X 16 Telephone Operation Speed Dial SELECT. The When you nish entering the name, press MENU screen displays ENTER NUMBER. Enter the telephone number. Use and make corrections. Press REDIAL/PAUSE to store pauses in the dialing sequence. Press REDIAL/PAUSE to display the last number to backspace

-OR-

dialed from this handset. Press MENU DISTINCT RING? and the current setting. SELECT to store your entry. The screen displays Press or to change the setting. Choose Y (for yes) if you wish the phone to alert you to calls from this number by changing to a distinctive ringing pat-

tern after the rst ring. Choose N for a normal ring-

ing pattern. Press MENU SELECT to con rm your selection. If you chose Y, will be displayed with that particular speed dial a entry. Edit a Speed Dial Entry Press and hold the memory location key (1 through SPEED EDIT ERASE 555-1234 01 or until EDIT ashes. 9) of the entry you wish to edit. When the screen displays the entry you want to edit, press SELECT. Then press Press SELECT. The screen displays the name and number. The cursor appears at the end of the name. and the keypad to edit the name. Press Use SELECT to move on to edit the number. Use to backspace and make corrections. Press SELECT to move to edit the distinctive ring setting.

, Press SELECT to save the edited information. Delete a Speed Dial Number/Name Press and hold the speed dial location key (1 through SPEED EDIT ERASE 555-1234 01 9) for the entry to be deleted. When the screen displays the entry yto be deleted, press SELECT. Then press ashes. until ERASE or 17 Telephone Operation Speed Dial Press SELECT. The screen displays ERASE NO YES and the number. Press Press SELECT. A con rmation beep will sound. until YES ashes. or SPEED EDIT ERASE 555-1234 01 Dial a Speed Dial Entry Press and hold the speed dial location key (1 through 9) of the entry you wish to dial. Press PHONE or SPEAKER to dial the displayed num-

ber in memory. Re-Assign Locations in Speed Dial Press and hold the speed dial location key (1 through 9) for the entry you want to be re-assigned. When the screen displays the entry to be re-

assigned, press SELECT. Then press or until SPEED ashes. Press SELECT. The screen displays ENTER 1-9. Press the keys (1 through 9) to re-assign this entry into another memory location. A con rmation beep will sound. 18 Directory Directory Your phone can store 30 (including the 9 speed dial entries) telephone numbers with names (up to 15 char-

acters for the name and 24 digits for the number in each location) in each handset. Store an entry Press MENU Press SELECT. The screen displays ENTER NAME. Using the chart on page 16, enter up to 15 char-

SELECT. The screen displays DIRECTORY. acters for the name to be stored with the number. Use advance and add a space. to backspace and make corrections; use to After entering the name, press SELECT. The screen displays ENTER NUMBER. Enter the telephone number. Use to backspace and make corrections. Press REDIAL/PAUSE to store a pause if necessary. OR Press REDIAL/PAUSE to display the last number dialed from this handset. Press SELECT. The screen displays DISTINCT RING?

and the current setting. Press or to choose Y (yes) if you wish the sys-

tem to alert you to calls from this number by chang-

ing to a distinctive ringer after the rst ring. Choose N for a normal ringer. Press SELECT to con rm. If you chose Y in Step 7, a will be displayed with that directory entry. Edit an entry Press DIR. The screen displays DIRECTORY. Press to scroll alphabetically through entries or stored in directory. OR Input the rst letter of the desired entry to be edited from the keypad. When the screen displays the desired entry to be edited, press SELECT. Then press ashes. or until EDIT Press SELECT. The screen displays the name and number. The cursor appears at the end of the name. Use and the keypad to edit the name.

, 19 SPEED EDIT ERASE 555-1234 SPEED EDIT ERASE 555-1234 SPEED EDIT ERASE 555-1234 Directory Press SELECT to con rm and move on to edit the to backspace and make corrections. Press SELECT to con rm and move to edit the dis-

number. Use tinctive ring setting. Press SELECT to save the edited information. Delete an entry Press DIR. The screen displays DIRECTORY. Press to scroll alphabetically through entries or stored in the directory. OR When the screen displays the desired entry, press Input the rst letter of the entry to be deleted. SELECT. Then press until ERASE ashes. Press SELECT. The screen displays ERASE NO YES and the number. The current choice ashes. Press Press SELECT. A con rmation tone will sound. until YES ashes. or Move an entry to Speed Dial Press DIR. The screen displays DIRECTORY. Press to scroll alphabetically through entries or stored in the directory. OR Input the rst letter of the entry to be moved to speed dial. or SELECT. Then press When the screen displays the desired entry, press until SPEED ashes. Press SELECT. The screen displays ENTER 1-9. Press the key (1-9) to move this entry from the nor-

mal directory to the speed dial memory and assign a memory location. A con rmation beep will sound. A memory location number (1 through 9) will be dis-

played with this entry. Dial a Number from the Directory Press DIR. The screen displays DIRECTORY. Press to scroll alphabetically through entries or stored in directory. OR When the screen displays the desired entry, press Input the rst letter of the entry to be dialed. PHONE or press SPEAKER. 20 J O H N S O N C H A R L I E L 908-555-0100 5/01 5:40 28 NEW PM OLD

Caller ID Logs Caller ID Log Shared Caller ID Log The Caller ID Log is stored in the base unit, and is shared by all handsets. Each handsets call log is indepen-

dent from the other handset. For example, when you delete one or all call log entries from one handset, the information on all other handsets will not be affected. How Caller ID works If you subscribe to Caller ID service provided by your local phone company, information about each caller will be displayed after the first ring. Callers name Long distance call Callers telephone number This party has called consecutively. J O H N S O N C H A R L I E L 908-555-0100 5/01 5:40 28 NEW PM OLD

Date of call Time of call Indicates whether the record is new or old Information about the last 30 incoming calls is stored in the call log in both the base unit and the cordless hand-

set respectively. You can review the call log to find out who has called, return the call, or copy the callers name and number into your directory. When the call log is full, the oldest entry is deleted to make room for new incoming call information. If you answer a call before the information appears on the screen, it will not be saved in the call log. NOTE: Only one handset can review the call log at a time. If another handset attempts to enter the call log, it will display NOT AVAILABLE AT THIS TIME. NOTE: Caller ID features will work only if both you and the caller are in areas offering Caller ID service, and if both telephone companies use compatible equipment. 21 Caller ID Logs Caller ID Log LCD Screen For each incoming call, the screen displays the following information between the first and second rings:

The callers name (15 letters are sent by your telephone company) The callers area code and telephone number. The time and date of the call. The repeat tag (*) in the upper right corner, indicating the caller has called more than once. This person called consecutively. Caller is blocking name and/or number information. Your local telephone company is unable to receive With most incoming calls, the screen shows the name of the originating subscriber (up to 16 characters including space) in the top row, and the originating telephone number including local long distant area code (up to 16 digits including space) in the second row. The third row shows the time/date stamp, the total number of incoming tele-

phone numbers already stored in the handset memory, as well as the low-battery icon if the batter is low. There are also occasions when other information or no information is displayed for various reasons:

On-Screen Message Reason PRIVATE UNKNOWN imformation about this callers name and/or number.

(Name) *

The information containing the callers name, telephone number, and the time/date stamp on the screen of the handset will light up when there is an incoming call, and it will remain lit on the screen for 6 seconds after the last ring if the call is not answered, or if the call is answered either by the corded receiver on the main unit or by the cordless handset if it is within range. If an incoming call is answered before the information appears on the screen, it will not be shown in the call history. About names Names of callers will be displayed only if this information is provided by your local tele-

phone company. If the telephone number of the person calling exactly matches a number in your direc-

tory, the name which appears on screen will match the name as you entered it into your directory.

(Example: If Christine Smith calls, her name will appear as Chris if this is how you entered it into your directory.) 22 6 NEW CALLS NEW Pat Williams 555-1234 NEW 11/23 10:31 AM Chris Thompson 908-555-0100 NEW 11/23 10:21 AM Jeffrey Adams 555-9876 NEW 11/23 10:11 AM Caller ID Logs To review the call log To review the call log Press CID incoming call record. on the cordless handset to activate the Press the two arrow keys (

on the cordless handset) to scroll through the incoming records to review incoming calls and check for missed calls. and Consecutive incoming calls originating from the same telephone number will are identi ed by an asterisk

(*) at the top right corner of the LCD screen. As each incoming call comes in, the Caller ID Memory automatically deletes the oldest Caller ID Memory record if the existing record exceeds 30. E.g. When there are already 30 entries in the CID Memory, the next incoming call will automatically cause Call No. 1 to be deleted from the CID Memory of the respective handset. To return a call Press on the cordless handset to activate the CID Memory. Press or on the cordless handset to scroll to the desired number to be dialed. or Press SELECT, then press Press SELECT or PHONE, and the number is auto-

until DIAL ashes. matically dialed. Caller ID numbers may appear with an area code which may not be required for local calls, or without a 1 which may be needed for long distance calls. If the number displayed is not in the correct format, press

# repeatedly to see different dialing options. You can choose to dial with or without the area code, and with or without the 1), then press PHONE to place the call. Example:

CID..............................Number displayed as 908-555-0100

### .........Number changes to 555-0100 (drops 1 + area code) PHONE/

SPEAKER ..................Dials 555-0100 23 Caller ID Logs To review the call log To store from the Caller ID Log into the directory Press Press on the cordless handset to activate the caller ID log. or on the cordless handset to scroll to the desired number to be stored. If you wish to change how the number is stored, press #. The screen displays all alternate dialing sequences available for this call (area code + number; 1 + area code

+ number; number only, 1 + number). See the note in the section above on changing the dialing sequence. Press SELECT, then press Press MENU Press Press SELECT. A beep tone will sound to con rm your choice. If you choose Y in to select Y or N for distinctive ringer. SELECT three times. The screen displays:

until PROGRAM ashes. or or the previous step, a D will be displayed with the directory entry. To delete an entry Press CID Press the arrow deleted. on the handset to activate the caller ID log. or on the handset to scroll to the incoming call entry to be When the desired record is displayed on the LCD screen, press DEL to delete the record and a con rmation beep will sound. The subsequent call entry will be advanced to that call number. NOTE: Deleting an incoming call record on one cordless handset does not automatically delete the same record from other handsets. NOTE: When an entry is deleted, the next oldest record is displayed. To delete all Caller ID records With the handset in the idle (off) mode, press CID on the handset to activate the Press and hold DEL on the handset for 1.5 seconds or longer to clear all entries in caller ID log. the CID Log of the unit. The message ERASE ALL NO YES appears on the screen, with the current choice of either NO or YES ashing, asking you to con rm that you want to delete all entries in the CID Log. If you select YES, the call log will be cleared and the screen will return to the nor-

mal standby display, showing new and old calls both as 00. Press Press SELECT and a beep tone will con rm the deletion until YES ashes. NOTE: When an entry is deleted, the next oldest record is displayed. Ring silencing If the LCD screen shows the telephone number from an undesirable caller, you can turn the ringer located on the left side of the base unit to the OFF position or by pressing OFF on the cordless handset. This will silence the ringer without disconnect-

ing the call. If your answering system is on, the caller will be asked to leave a message after the outgoing message is played. 24 908-555-0100 5/01 5:40 28 PM OLD DIAL PROGRAM 908-555-0100 5/01 5:40 28 PM OLD 908-555-0100 5/01 5:40 28 PM OLD DIAL PROGRAM 908-555-0100 5/01 5:40 28 PM OLD DISTINCT RING? N 908-555-0100 5/01 5:40 28 PM OLD Caller ID Logs Dial a Displayed Number Locate the desired record in call history. If you wish to change how the number is dialed, press #. The screen displays any alternate dialing sequences available for this call (area code + number;

1 + area code + number; number only; 1+ number). See the margin for more information on changing the dialing format. Press SELECT. Press Press SELECT. The number is automatically dialed. until DIAL ashes. or OR When the number is correctly displayed for dialing, press PHONE or SPEAKER to dial the number. Store a Caller ID Entry in the Directory Locate record in call history. If you wish to change how the number is dialed, press #. The screen displays any alternate dialing sequences available for this call (area code + number;

1 + area code + number; number only; 1+ number). See the margin for more information on changing the dialing format. Press SELECT, then press or until PROGRAM ashes. Press SELECT three times. The screen displays:

Press Press SELECT. Youll hear a con rmation beep. If you to select Y or N for distinctive ringer. or choose Y in step 5 a directory entry. will be displayed with the NOTE: Caller ID numbers may appear with an area code that may not be required for local calls, or without a 1 that may be needed for long distance calls. If the number displayed is not in the correct format, press # repeatedly to see the different dialing options. You can choose to dial with or without the area code and with or without the 1. 25 HANDSET 1 6 NEW CALLS NEW Pat Williams 555-1234 NEW 11/23 10:31 AM Chris Thompson 908-555-0100 NEW 11/23 10:21 AM Jeffrey Adams 555-9876 NEW 11/23 10:11 AM Caller ID Logs To review the call log To review the call log Press CID to review the call log. The most recent call is displayed first. Use the arrow buttons to scroll through the list as shown at left. To return a call Press PHONE (or SPEAKER) to call the number as displayed. Caller ID numbers may appear with an area code that may not be required for local calls, or without a "1" that may be needed for long distance calls. If the number dis-

played is not in the correct format, you can change how it is dialed. To change the number before calling, press # repeat-

edly to see different dialing options (you can choose to dial with or without code, and with or without the "1"), then press PHONE (or SPEAKER) to place the call. Example:

CID..............................Number displayed as 908-555-0100

# (three times) ......Number changes to 555-0100 (drops 1 + area code) PHONE/

SPEAKER ..................Dials 555-0100 Other options Press DELETE to delete this entry from the call log. Press and hold DELETE to delete all entries from the call log. When asked to con rm, press SELECT to clear the call log of all entries, or OFF to exit and leave all call log entries intact. Press SELECT to copy this entry into your directory. If the name or number is not provided, you will be prompted to enter them (see page 21). NOTE: If both the name and number are not provided, UNABLE TO SAVE will be displayed. 26 Caller ID Logs Display Screen Messages Screen Displays: When:

PRIVATE The other party is blocking the name and/or num-

ber information. UNKNOWN Your phone company is unable to receive infor-

mation about this callers name and/or number.

* (after name) This person called consecutively. 27 Appendix Troubleshooting If you have difficulty with your phone, please try the suggestions below. For Customer Service, visit our web site at www.telephones.att.com, or call 1-800-2223111. My phone doesnt work at all.

Make sure the power cord is securely plugged in.

Make sure the telephone line cord is securely plugged firmly into the base unit and the telephone wall jack. I cannot get a dial tone

Charge the battery in the handset for at least 16 hours. For optimum daily performance, return the handset to its base when not in use.

Reset the base. Unplug the units electrical power. Wait for approxi-

mately 15 seconds, then plug it back in. Allow up to one minute for the handset and base to reset.

You may need to purchase a new battery, please refer to the battery section of this users manual.

First try all the suggestions above.

Move the handset closer to the base. You might have moved out of range.

Your line cord might be malfunctioning. Try installing a new line cord.

If the previous suggestions dont work, disconnect the base unit from the telephone jack and connect a different phone. If there is no dial tone on that phone either, the problem is in your wiring or local ser-

vice. Contact your local telephone company. I cannot dial out

Make sure you have a dial tone before dialing. The handset may take a second or two to identify the base and produce a dial tone. This is normal. Wait an extra second before dialing.

Make sure your phone is set to the correct dial mode for the type of service that you have (pulse or touch tone). Refer to the Installation section of this users manual to set the dial mode.

If the other phones in your home are having the same problem, the problem is in your wiring or local service. Contact your local tele-

phone company (charges may apply.)

Eliminate any background noise. Noise from a television, radio or other appliance may cause the phone to not dial out properly. If you cannot eliminate the background noise, first try muting the handset before dialing, or dialing from another room in your home with less background noise. My handset beeps five times and isnt performing nor-

mally.

Make sure the power cord is securely plugged into the base. Plug the unit into a different, working outlet not controlled by a wall switch.

Move the handset closer to the base. You might have moved out of range. 28 Appendix Troubleshooting

Reset the base. Unplug the units electrical power. Wait for 15 sec-

onds then plug it back in. Allow up to one minute for the handset and base to reset. Other electronic products can cause interference to your cordless phone. Try installing your phone as far away from these types of electronic devices as possible: wireless routers, radios, radio towers, pager towers, cell phones, intercoms, room monitors, televisions, personal computers, kitchen appliances and other cordless phones. CANT CONNECT displays on my handset. The batteries will not hold a charge. I get noise, static, or weak signal even when Im near the base

Move the handset closer to the base. You might have moved out of range.

Charge the battery in the handset for at least 16 hours. For optimum daily performance, return the handset to its base when not in use.

You may need to purchase a new battery, please refer to the batteries section of this users manual.

Your phone might be malfunctioning. Please refer to the warranty section of this users manual for further instruction.

Press the CHAN button while on a call until the interference has been eliminated.

Other electronic products can cause interference to your cordless phone. Try installing your phone as far away from the following elec-

tronic devices as possible: wireless routers, radios, radio towers, pager towers, cell phones, intercoms, room monitors, televisions, personal computers, kitchen appliances and other cordless phones.

Microwaves operate on the same frequency as your phone. It is nor-

mal to experience static on your phone while the microwave oven is operating. Do not install this phone in the same outlet or near a micro-

wave oven.

If your phone is plugged in with a modem or a surge protector, plug the phone (or modem/surge protector) into a different location. If this solves the problem, re-locate your phone or modem farther apart from one another, or use a different surge protector.

Relocate your phone to a higher location. The phone will likely have better reception when not installed in a low area.

If the other phones in your home are having the same problem, the problem is in your wiring or local service. Contact your local tele-

phone company (charges may apply.) 29 Appendix Troubleshooting I hear other calls while using my phone

Press the CHAN key while on a call to change to a clear channel.

Disconnect the base unit from the telephone jack, and plug in a regu-

lar telephone. If you still hear other calls, the problem is probably in your wiring or local service. Call your local telephone company. I hear noise in the handset, and none of the keys or buttons work My handset does not ring when I receive a call

Make sure the power cord is plugged in securely.

Make sure you have the ringer activated. Refer to the section(s) on ringer selection in this users manual.

Make sure the telephone line cord is plugged securely into the base unit and the telephone jack. Make sure the power cord is securely plugged in.

The handset may be too far from the base unit.

Charge the battery in the handset for at least 16 hours. For optimum daily performance, return the handset to its base when not in use.

You may have too many extension phones on your telephone line to allow all of them to ring simultaneously. Try unplugging some of the other phones.

The layout of your home or office might be limiting the operating range. Try moving the base to another location, preferably on an upper floor.

If the other phones in your home are having the same problem, the problem is in your wiring or local service. Contact your local tele-

phone company (charges may apply.)

Test a working phone at the phone jack. If another phone has the same problem, the problem is the phone jack. Contact your local telephone company (charges may apply.)

Other electronic products can cause interference with your cordless phone. Try installing your phone as far away as possible from elec-

tronic devices wireless routers, radios, radio towers, pager towers, cell phones, intercoms, room monitors, televisions, personal comput-

ers, kitchen appliances and other cordless phones

Your line cord might be malfunctioning. Try installing a new line cord. 30 Appendix Troubleshooting My calls fade out or cut in and out while Im using my handset

Press the CHAN button while on a call until the interference has been eliminated.

Other electronic products can cause interference with your cord-

less phone. Try installing your phone as far away from the following electronic devices as possible: wireless routers, radios, radio towers, pager towers, cell phones, intercoms, room monitors, televisions, personal computers, kitchen appliances and other cordless phones

Microwaves operate on the same frequency as your phone. It is nor-

mal to experience static on your phone while the microwave oven is operating. Do not install this phone in the same outlet or near the microwave oven. If your phone is plugged in with a modem or surge protector, plug the phone (or modem/surge protector) into a different location. If this solves the problem, re-locate your phone or modem farther apart from one another, or use a different surge protector.

Relocate your phone to a higher location. The phone will have better reception when not installed in a low area. If the other phones in your home are having the same problem, the problem is in your wiring or local service. Contact your local tele-

phone company (charges may apply.)

The charge light is off

Clean the handset and base charging contacts each month using a pencil eraser or cloth.

Make sure the power and line cords are plugged in correctly and securely.

Unplug the units electrical power. Wait for 15 seconds, then plug it back in. Allow up to one minute for the handset and base to reset.

Your phone might be malfunctioning. Please refer to the Warranty section of this users manual for further instruction. My Caller ID isnt working

Caller ID is a subscription service. You must subscribe to this service from your local telephone company for this feature to work on your phone.

Your caller must be calling from an area that supports caller ID.

Both you and your callers telephone companies must use caller ID compatible equipment. Common cure for electronic equipment If the unit does not seem to be responding normally, try putting the handset in its base. If it does not seem to respond, do the following

(in the order listed):

Disconnect the power to the base.

Disconnect the handset battery, and spare battery, if applicable.

Wait a few minutes.

Connect power to the base. 31 Appendix Troubleshooting

Re-install the battery, and place handset in base cradle.

Wait for the handset to re-establish its connection with the base. To be safe, allow up to one minute for this to take place. If you subscribe to DSL service

If you hear noise during conversations and/or your caller ID features arent functioning properly, install a noise filter to the telephone line between the base unit and the telephone line jack. Contact your DSL provider to obtain a noise filter. Cant connect displays on my handset.

Place the handset in base cradle for 1 minute to allow the handset and base re-synchronize channels.

Move the handset closer to the base. You might have moved out of range. If the handset is in its base and the charging light does not come on, refer to the charge light is off in this troubleshooting guide.

Reset the base. Unplug the unitd electrical power. Wait for 15 sec-

onds then plug it back in. Allow up to one minute for the handset and base to reset.

Other electronic products can cause interference with your cord-

less phone. Try installing your phone as far away from these types of electronic devices as possible: wireless routers, radios, radio towers, page towers, cell phones, intercoms, room monitors, televisions, per-

sonal computers, kitchen appliances and cordless phones. The batteries will not hold a charge.

Charge the battery in the handset for 16 hours. For optimum daily performance, return the handset to its base when not in use.

You may need to purchase a new battery, please refer to the batteries section of this users manual.

You phone might be malfunctioning. please refer to the warranty sec-

tion of this users manual for further instruction. 32 Appendix Important product information This symbol is to alert you to important operating or servicing instructions that may appear in this users manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. Safety Information Read and understand all instructions in the users manual. Observe all markings on the product. Avoid using a telephone during a thunderstorm. There may be a slight chance of electric shock from lightning. Do not use a telephone in the vicinity of a gas leak. If you suspect a gas leak, report it immediately, but use a telephone away from the area where gas is leaking. If this product is a cordless model, make sure the base is also away from the area. Do not use this product near water, or when you are wet. For example, do not use it in a wet basement or shower, or next to a swimming pool, bathtub, kitchen sink, or laundry tub. Do not use liquids or aerosol sprays for cleaning. If the product comes in contact with any liquids, unplug any line or power cord immediately. Do not plug the product back in until it has dried thoroughly. Install this product in a protected location where no one can trip over any line or power cords. Protect cords from damage or abrasion. If this product does not operate normally, read In Case of Difficulty in the users manual. If you cannot solve the problem, or if the product is damaged, refer to the Limited Warranty. Do not open this product except as may be directed in your users manual. Opening the product or reassembling it incorrectly may expose you to hazardous voltages or other risks. If this product has user-replaceable batteries, replace batteries only as described in your users manual. Do not burn or puncture batteries they contain caustic chemicals. If this product has a three-prong (grounding) plug or a polarized plug with one wide prong, it may not fit in non-polarized outlets. Do not defeat the purpose of these plugs. If they do not fit in your outlet, the outlet should be replaced by an electrician. CAUTION: Use only the power adapter provided with this product. To obtain a replacement, call 1-800-2223111. 33 Appendix Save these instructions Especially About Cordless Telephones Privacy: The same features that make a cordless phone convenient create some limitations. Telephone calls are transmitted between the base and the handset by radio waves, so there is a possibility that your cordless phone conversations could be intercepted by radio receiving equipment within range of the cordless handset. For this reason, you should not think of cordless phone conversations as being as private as those on corded phones. Electrical Power: The base unit of this cordless telephone must be connected to a working electrical outlet. The electrical outlet should not be controlled by a wall switch. Calls cannot be made from the handset if the base unit is unplugged or switched off, or if the electrical power is interrupted. Potential TV Interference: Some cordless telephones operate at frequencies that may cause interference to TVs and VCRs. To minimize or prevent such interference, do not place the base unit of the cordless telephone near or on top of a TV or VCR. If interference is experienced, moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference. (Applies to 25-channel cordless phones only.) Rechargeable Batteries: This product contains either Nickel-Cadmium or Nickel-Metal Hydride rechargeable batteries. Exercise care in handling batteries in order not to short the battery with conducting material such as rings, bracelets, and keys. The battery or conductor may overheat and cause harm. Observe proper polarity between the battery and the battery charger. Nickel-Cadmium Rechargeable Batteries: Must be recycled or disposed of properly. Do not dispose of in household garbage. Do not burn or puncture. Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury. The RBRC Seal means that the manufacturer is voluntarily participating in an industry program to collect and recycle Nickel-Cadmium rechargeable batteries when taken out of service within the United States. These batteries may be taken to a participating local retailer of replacement batteries or recycling center. Or you may call 1 800 8BATTERY for locations accepting spent Nickel-Cadmium Batteries. Nickel-Metal Hydride Rechargeable Batteries: Dispose of these batteries in a safe manner. Do not burn or puncture. Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury. Nickel-Metal Hydride Rechargeable Batteries: Dispose of these batteries in a safe manner. Do not burn or puncture. Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury. 34 Appendix Save these instructions Precautions for Users of Implanted Cardiac Pacemakers Cardiac Pacemakers (applies only to 900 MHz Digital Cordless Telephones):

Wireless Technology Research, LLC (WTR), an independent research entity, led a mul-

tidisciplinary evaluation of the interference between portable wireless telephones and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR had recommended to physicians that:

PACEMAKER PATIENTS Should keep wireless phones at least six inches from the pacemaker. Should NOT place wireless phones directly over the pacemaker, such as in a breast pocket, when it is turned ON. Should use the wireless phone at the ear opposite the pacemaker. WTRs evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless phones. Especially About Telephones Answering Systems Two-Way Recording: This unit does not sound warning beeps to let the other party know that the call is being recorded. To ensure that you are in compliance with any federal or state regulations regarding recording a telephone call, you should start the recording process and then inform the other party that you are recording the call. 35 Appendix FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical require-

ments adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US: AAAEQ##TXXXX. This identifier must be provided to your local telephone company upon request. The plug and jack used to connect this equipment to premises wiring and the tele-

phone network must comply with applicable Part 68 rules and technical requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also com-

pliant. An RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two lines. See Installation Instructions in the users manual. The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone line and still have them ring when you are called. The REN for this product is encoded as the 6th and 7th characters following the US: in the product identifier (e.g., if ## is 03, the REN is 0.3). In most, but not all areas, the sum of all RENs should be five (5.0) or less. For more information, please contact your localtelephone company. This equipment may not be used with Party Lines. If you have specially wired alarm dial-

ing equipment connected to your telephone line, ensure the connection of this equip-

ment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents. For repair procedures, follow the instructions outlined under the Limited Warranty. If this equipment is causing harm to the telephone network, the telephone com-

pany may temporarily discontinue your telephone service. The telephone company is required to notify you before interrupting service. If advance notice is not practical, you will be notified as soon as possible. You will be given the opportunity to correct the problem and the telephone company is required to inform you of your right to file a complaint with the FCC. Your telephone company may make changes in its facilities, equipment, operation, or procedures that could affect the proper functioning of this product. The telephone company is required to notify you if such changes are planned. If this product is equipped with a corded or cordless handset, it is hearing aid compat-

ible. 36 Appendix FCC Part 15 If this product has memory dialing locations, you may choose to store emergency telephone numbers (e.g., police, fire, medical) in these locations. If you do store or test emergency numbers, please:

Remain on the line and briefly explain the reason for the call before hanging up. Perform such activities in off-peak hours, such as early morning or late evening. This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission

(FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equip-

ment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to cor-

rect the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the Increase the separation between the equipment and receiver. receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The handset may be safely held against the ear of the user. The base unit shall be installed and used such that parts of the users body other than the hands are maintained at a distance of approximately 20 cm (8 inches) or more. If you choose to use a clipping device, please make sure to only use the supplied AT&T belt clip. 37 Appendix Limited Warranty The AT&T brands are used under license. Any repair, replacement or warranty ser-

vice, and all questions about this product should be directed to: Advanced American Telephones, 1-800-222-3111 or www.telephones.att.com. In Canada, call 1-866-288-

4268. 1 What does this limited warranty cover?

The manufacturer of this AT&T-branded product, Advanced American Telephones

(AAT), warrants to the holder of a valid proof of purchase (CONSUMER or YOU) that the product and all accessories provided by AAT in the sales package

(PRODUCT) are free from material defects in material and workmanship, pursu-

ant to the following terms and conditions, when installed and used normally and in accordance with operation instructions. This limited warranty extends only to the Consumer for Products purchased and used in the United States of America. 2 What will AAT do if the Product is not free?

from material defects in materials and workmanship during the limited warranty period (MATERIALLY DEFECTIVE PRODUCT)?

During the limited warranty period, AATs authorized service representative will repair or replace, at AATs option, without charge, a Materially Defective Product. If AAT repairs this product, AAT may use new or refurbished replacement parts. If AAT chooses to replace this product, AAT may replace it with a new or refurbished product of the same or similar design. AAT will return repaired or replacement products to you in working condition. AAT will retain defective parts, modules, or equipment. Repair or replacement of Product, at AATs option, is your exclusive remedy. You should expect the repair or replacement to take approximately 30 days. 3 How long is the limited warranty period?

The limited warranty period for the Product extends for ONE (1) YEAR from the date of purchase. If AAT repairs or replaces a Materially Defective Product under the terms of this limited warranty, this limited warranty also applies to repaired or replacement Products for a period of either (a) 90 days from the date the repaired or replace-

ment Product is shipped to you or (b) the time remaining on the original one-year limited warranty, whichever is longer. 38 Appendix Limited Warranty 4 What is not covered by this limited warranty?

This limited warranty does not cover:

Product that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water, or other liquid intrusion; or Product that has been damaged due to repair, alteration, or modification by anyone other than an authorized service representative of AAT; or Product to the extent that the problem experienced is caused by signal conditions, network reliability or cable or antenna systems; or Product to the extent that the problem is caused by use with non-AAT accessories; or Product whose warranty/quality stickers, product serial number plates or electronic serial numbers have been removed, altered or rendered illegible; or Product purchased, used, serviced, or shipped for repair from outside the United States, or used for commercial or institutional purposes (including but not limited to Products used for rental purposes); or Product returned without valid proof of purchase (see 6 below); or charges for installation or setup, adjustment of customer controls, and installation or repair of systems outside the unit. 5 How do you get warranty service?

To obtain warranty service in the United States of America, call 1-800-222-3111 for instructions regarding where to return the Product. Before calling for service, please check the users manual. A check of the Product controls and features may save you a service call. Except as provided by applicable law, you assume the risk of loss or damage dur-

ing transit and transportation and are responsible for delivery or handling charges incurred in the transport of Product(s) to the service location. AAT will return repaired or replaced Product under this limited warranty to you, transportation, delivery or handling charges prepaid. AAT assumes no risk for damage or loss of the Product in transit. If the Product failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, AAT will notify you and will request that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for the repair of Products that are not covered by this limited warranty. 39 Appendix Limited Warranty 6 What must you return with the Product to get warranty service?

You must:

a return the entire original package and contents including the Product to the AAT service location along with a description of the malfunction or difficulty;

b include valid proof of purchase (sales receipt) identifying the Product purchased

(Product model) and the date of purchase or receipt (keep a copy for your records); and c provide your name, complete and correct mailing address, and telephone number. 7 Other limitations This warranty is the complete and exclusive agreement between you and AAT. It supersedes all other written or oral communications related to this Product. AAT provides no other warranties for this product. The warranty exclusively describes all of AATs responsibilities regarding the product. There are no other express warran-

ties. No one is authorized to make modifications to this limited warranty and you should not rely on any such modification. State Law Rights: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Limitations:

Implied warranties, including those of fitness for a particular purpose and merchant-

ability (an unwritten warranty that the product is fit for ordinary use) are limited to one year from date of purchase. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event shall AAT be liable for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost profits or revenue, inability to use the product, or other associated equipment, the cost of substitute equipment, and claims by third parties) resulting from the use of this product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Please retain your receipt as your proof of purchase. 40 Appendix Technical specifications RF Frequency Band

(Handset to base) RF Frequency Band

(Base to handset) 921.4 MHz 927.2 MHz 2400.9 MHz 2405.1 MHz Channels 30 Operating Temperature Base Unit Voltage

(AC Voltage, 60Hz) Base Unit Voltage

(AC Adapter Output) 32 122 F 0C 50C 120V AC 60Hz E2116: 9V DC 300mA E2116: 9V DC 400mA Handset Voltage 3.6V 600mAH Ni-Cd Battery 41 www.telephones.att.com Copyright 2005 Advanced American Telephones. All Rights Reserved. AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones. Printed in China. Issue 1 AT&T 11/05. 91-000667-010-000