FCC ID: EW780-9065-00A DECT 6.0 cordless telephone

Whats in the box Your telephone package contains the following items. Save your sales receipt and original packaging in case it is necessary to ship your telephone for warranty service. Abridged users manual Do not open or mutilate the battery. Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed. Exercise care in handling batteries in order not to create a short circuit with conductive materials. Charge the battery provided with this product only in accordance with the instructions and limitations specified in this manual. Precautions for users of implanted cardiac pacemakers Cardiac pacemakers (applies only to digital cordless telephones):

Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless telephones and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that:

Pacemaker patients Should keep wireless telephones at least six inches from the pacemaker. Should NOT place wireless telephones directly over the pacemaker, such as in a breast pocket, when it is turned ON. Should use the wireless telephone at the ear opposite the pacemaker. WTRs evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless telephones. About cordless telephones Privacy: The same features that make a cordless telephone convenient create some limitations. Telephone calls are transmitted between the telephone base and the cordless handset by radio waves, so there is a possibility that the cordless telephone conversations could be intercepted by radio receiving equipment within range of the cordless handset. For this reason, you should not think of cordless telephone conversations as being as private as those on corded telephones. Electrical power: The telephone base of this cordless telephone must be connected to a working electrical outlet. The electrical outlet should not be controlled by a wall switch. Calls cannot be made from the cordless handset if the telephone base is unplugged, switched off or if the electrical power is interrupted. Potential TV interference: Some cordless telephones operate at frequencies that may cause interference to televisions and VCRs. To minimize or prevent such interference, do not place the telephone base of the cordless telephone near or on top of a TV or VCR. If interference is experienced, moving the cordless telephone farther away from the TV or VCR often reduces or eliminates the interference. Rechargeable batteries: Exercise care in handling batteries in order not to create a short circuit with conducting material such as rings, bracelets and keys. The battery or conductor may overheat and cause harm. Observe proper polarity between the battery and the battery charger. Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe manner. Do not burn or puncture the battery. Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury. Telephone operations CS6719 CS6719-15 CS6719-16 CS6719-17 CS6719-2 CS6719-26 CS6719-27

(US)

(CA) Scan the QR code for support information Abridged users manual Important safety instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following:

1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4. CAUTION: Do not install the telephone base at a height above 2 meters. 5. Do not use this product near water such as near a bath tub, wash bowl, kitchen sink, laundry tub or a swimming pool, or in a wet basement or shower. 6. Do not place this product on an unstable table, shelf, stand or other unstable surfaces. 7. Avoid placing the telephone system in places with extreme temperature, direct sunlight, or other electrical devices. Protect your phone from moisture, dust, corrosive liquids and fumes. 8. Slots and openings in the back or bottom of the telephone base and handset are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat register. This product should not be placed in any area where proper ventilation is not provided. 9. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home or office, consult your dealer or local power company. 10. Do not allow anything to rest on the power cord. Do not install this product where the cord may be walked on. 11. Never push objects of any kind into this product through the slots in the telephone base or handset because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product. 12. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the telephone base or handset other than specified access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used. 13. Do not overload wall outlets and extension cords. 14. Unplug this product from the wall outlet and refer servicing to an authorized service facility under the following conditions:

When the power supply cord or plug is damaged or frayed. If liquid has been spilled onto the product. If the product has been exposed to rain or water. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operation instructions. Improper adjustment of other controls may result in damage and often requires extensive work by an authorized technician to restore the product to normal operation. If the product has been dropped and the telephone base and/or handset has been damaged. If performance. the product exhibits a distinct change in 15. Avoid using a telephone (other than cordless) during an electrical storm. There is a remote risk of electric shock from lightning. 16. Do not use the telephone to report a gas leak in the vicinity of the leak. Under certain circumstances, a spark may be created when the adapter is plugged into the power outlet, or when the handset is replaced in its cradle. This is a common event associated with the closing of any electrical circuit. The user should not plug the phone into a power outlet, and should not put a charged handset into the cradle, if the phone is located in an environment containing concentrations of flammable or flame-supporting gases, unless there is adequate ventilation. A spark in such an environment could create a fire or explosion. Such environments might include: medical use of oxygen without adequate ventilation; industrial gases (cleaning solvents; gasoline vapors; etc.); a leak of natural gas; etc. 17. Only put the handset of your telephone next to your ear when it is in normal talk mode. 18. The power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet. 19. For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible. 20. CAUTION: Use only the batteries indicated in this manual. There may be a risk of explosion if a wrong type of battery is used for the handset. Use only the supplied rechargeable batteries or replacement batteries (BT162342/BT262342) for the handset. Do not dispose of batteries in a fire. They may explode. Disposed of used batteries according to the instruction. Do not use the battery in following conditions:

High or low extreme temperature during use, storage or transportation. Replacement of a battery with an incorrect type that can defeat a safeguard. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. in an extremely high Leaving a battery temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas. A battery subjected to extremely low air pressure that can result in an explosion or the leakage of flammable liquid or gas. 21. Use only the adapter included with this product. Incorrect adapter polarity or voltage can seriously damage the product. 22. The applied nameplate is located at the bottom or near of the product. SAVE THESE INSTRUCTIONS Battery Use only the battery provided or equivalent. To order a replacement, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to phones.vtechcanada.com or call 1 (800) 267-7377. Do not dispose of the battery in a fire. Check with local waste management codes for special disposal instructions. BT_HSDE56-BSDE58BVSD CS6719-X_BT_DE56_US-CAN_ACIB_V3_2308018 All rights reserved. 08/23. 2023 VTech Technologies Canada Ltd. 2023 VTech Communications, Inc. |

Specifications are subject to change without notice. member of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners. American Telephones and its parent, VTech Holdings Limited, is under license. VTech Holdings Limited is a The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Advanced VTech product news. Go to phones.vtechcanada.com (Canada) for the latest VTech product news. product for enhanced warranty support and latest Go to www.vtechphones.com (US) to register your Install and Connect | Mount (optional) Install the battery Connect and charge THIS SIDE UP Connect the telephone base If you subscribe to digital subscriber line (DSL) high-speed Internet service through your telephone line, make sure you connect a DSL filter (not included) to the telephone wall jack. THIS SIDE UP 1 set for CS6919-2/

CS6919-26/CS6919-27 THIS SIDE UP B attery P B W A R D T 1 NIN 6 2 3 O N G / A T B O A E P d e in C S IN CIN U R N M a T HIS SID k / Blo 4 2/B a c E U T 2 6 c-pile V E R N O TIS 2 3 4 S E s :

2 (2.4 P / C E C T V E R S L hin R a / F a E R P R O briq u 0 m U N M E N V 3 0 U R T :

E B C T U P e E R n c C E A T R L E T E hin RIE A h Ni-M H) E H A U T S. S PIL e C S. E R 1 9 3 9 1 set for CS6719/

CS6719-15/CS6719-16/

CS6719-17 |

2 sets for CS6919-2/

CS6919-26/CS6919-27 Setup After the telephone is installed or power returns following a power outage and battery depletion, the handset will prompt you to set the date and time. Date and time Follow the steps below to set the date and time. For example, if the date is 25 July, 2023, and the time is 11:07 AM:

Change LCD language settings Telephone base Overview You can select English, French, or Spanish to be used in all screen displays:

HANDSET Settings When the handset prompts you to set the date and time:

Date:MM/DD/YY ECO ECO ECO 11:07 1/25 AM 1. Press MENU. 2. Press q/p to scroll to Settings, then press SELECT. Date:07/2?/YY Date:07/25/23 LCD language English ECO ECO ECO ECO 1. Enter the date. 2. Press SELECT. Time: 1?:MM --

Time: 11:07 AM ECO ECO 3. Enter the time. 4. Press q/p to select AM to PM. 5. Press SELECT to save. NOTE: If you have skipped the prompt, you can set up again by pressing MENU. Scroll to choose Set date/time and press SELECT. Then, follow the steps above. 3. Press SELECT to select LCD language. 4. Press q/p to choose your desired language and press SELECT. NOTE: If you accidentally set the LCD language to Spanish or French, press MENU and then enter *364# to change the handset LCD language back to English while the handset is not in use. a 1 Charging pole Handset Use the handset menu 1. Press MENU when the phone is not in use. 2. Press q or p until the screen displays the desired feature menu. 3. Press SELECT to enter that menu. To return to the previous menu, press CANCEL. To exit menu display, press and hold CANCEL. Make a call Press or number. Answer a call Press

, and then dial the telephone or any dialing keys. End a call Press OFF or put the handset back in the telephone base or charger. Speakerphone During a call, press on the handset to switch between speakerphone and handset earpiece. Volume During a call, press p/VOLUME/q to adjust the listening volume. Mute The mute function allows you to hear the other party but the other party cannot hear you. 1. During a call, press MUTE. The handset displays Muted. 2. Press MUTE again to resume the conversation. The handset displays Microphone ON briefly. Join a call in progress You can use up to two system handsets at a time on an outside call. When a handset is already on a call, press on another handset to join the call. Press OFF or place the handset in the or telephone base or charger to exit the call. The call continues until all handsets hang up. Call waiting When you subscribe to call waiting service from your telephone service provider, you hear an alert tone if there is an incoming call while you are already on a call. Press FLASH to put the current call on hold and take the new call. Press FLASH at any time to switch back and forth between calls. c d Mount (optional) a 12 hrs b A 1 Handset earpiece 2 LCD display 3 Show the menu. While in a menu, press to select an item, or save an entry or setting. 4 Hang up a call. Return to the previous menu. Press and hold to exit menu display without making changes. Delete digits while predialing. Silence the handset ringer temporarily while the phone is ringing. Press and hold to erase the missed call indicator while the handset is not in use. 5 Press and hold to turn on or off the quiet mode. Press repeatedly to show other dialing options when reviewing a caller ID log entry. 6 Press to start an intercom conversation or transfer a call (for multi-handset models only). 7 Microphone 8 Make or answer a call using the handset speakerphone. During a call, press to switch between the speakerphone and the handset earpiece. 9 Mute the microphone during a call. Silence the handset ringer temporarily while the phone is ringing. Delete the displayed entry while reviewing the phonebook, caller ID log, or redial list. Delete digits or characters when entering numbers or names. 10 Switch to tone dialing temporarily during a call. 11 12 Press to add a space when entering names. Press repeatedly to add or remove 1 in front of the caller ID log entry before dialing or saving it to the phonebook. Press and hold to set or dial your voicemail number. 13 Make or answer a call. Answer an incoming call when you receive a call waiting alert. 14 Review the redial list. Press and hold to insert a dialing pause while dialing or entering numbers into the phonebook. 15 Review the phonebook when the phone is not in use. Scroll up while in a menu, or in the phonebook, caller ID log or redial list. Move the cursor to the right when entering numbers or names. Increase the listening volume during a call. Review the caller ID log when the telephone is not in use. Scroll down while in a menu, or in the phonebook, caller ID log or redial list. Move the cursor to the left when entering numbers or names. Decrease the listening volume during a call. 16 light On when the handset is charging. Display icons The battery icon flashes when the battery is low and needs charging. The battery icon animates when the battery is charging. The battery icon becomes solid when the battery is fully charged. The handset ringer is turned off. There are new voicemail received from your telephone service provider. New caller ID log entry. The ECO mode activates automatically to reduce power consumption when the handset is within range from the telephone base. NEW ECO Pair and connect a Bluetooth headset NOTES:

Before you begin, make sure that your Bluetooth enabled headset is not connected to any other Bluetooth device. Bluetooth wireless technology operates within a short range (a maximum of approximately 15 feet) from the telephone base. Keep connected headset within this range. You can pair a Bluetooth headset to your telephone system and answer calls with your Bluetooth headset. 1. Set your Bluetooth headset to pairing mode. Refer to your Bluetooth headset users manual to learn how. 2. Press or on the handset. The telephone bases IN USE LED turns on. 3. Use the dialing keys to enter 2 8 2 8. The handset dials the entered numbers. The telephone will then enter pairing mode and the IN USE LED flashes. While pairing, the telephone plays one short beep every 2 seconds. The pairing process takes up to 90 seconds. To cancel pairing, press OFF on the handset or place the handset in the telephone base or charger. 4. When the Bluetooth headset is paired and connected to the telephone, the telephone plays a confirmation tone. If pairing process times out or fails, the telephone plays an error tone. 5. Press OFF on the handset or place the handset in the telephone base or charger to end the pairing process. NOTES:

To check if the Bluetooth headset is connected, use another telephone or a cell phone to make a call to your CS6719/CS6719-

15/CS6719-16/CS6719-17/CS6719-2/CS6719-26/

CS6719-27 telephone, and answer the call with your Bluetooth headset. You can use your Bluetooth headset to answer calls or end the calls. If you fail to answer the call with your Bluetooth headset, re-try the pairing steps above. While on a call using your Bluetooth headset, keep your headset closer to the telephone base (within 15 feet) and make sure that there are no physical obstacles such as large furniture or thick wall in between. d c a b 1 light Flashes when there is an incoming call, or another telephone sharing the same line is in use. On when the telephone is in use. 2 Page all system handsets. 3 Charging pole 4 Charge light Charger p o n m l k j i h a b c d e f g Find handset Use this feature to find the system handset. To start paging:

Press FIND HANDSET on the telephone base when not in use. All idle handsets ring and display ** Paging **. To end paging:

Press FIND HANDSET at the telephone base.

-OR-

Press

, OFF or any dialing keys on the

, handset.

-OR-

Place the handset in the telephone base or charger. NOTE:

Do not press and hold for more than 4 seconds. It may lead to handset deregistration. FIND HANDSET Redial list Each handset stores the last 10 telephone numbers dialed. When there are already 10 entries, the oldest entry is deleted to make room for the new entry. Review and dial a redial list entry 1. Press REDIAL when the handset is not in use. 2. Press q, p or REDIAL repeatedly until the desired entry displays. 3. Press or to dial. Delete a redial list entry When the desired redial entry displays, press DELETE. Intercom Use the intercom features for conversations between two handsets. 1. Press INT on your handset when not in use. Use the dialing keys to enter a destination handset number if necessary. 2. To answer the intercom call, press

, INT or any dialing key on the destination handset. 3. To end the intercom call, press OFF or place the handset back in the telephone base or charger.

, Answer an incoming call during an intercom call If you receive an incoming call during an intercom call, there is an alert tone. To answer the outside call, press intercom call ends automatically. The To end the intercom call without answering the outside call, press OFF. The telephone continues to ring. Call transfer using intercom While on an outside call, you can use the intercom feature to transfer the call from one handset to another. 1. Press INT on your handset during a call. The current call is put on hold. Use the dialing keys to enter a destination handset number if necessary. 2. To answer the intercom call on the destination

, INT or any dialing key on handset, press the destination handset. You can now have a private conservation before transferring the call. You can transfer the call. Press OFF, or place your handset back in the telephone base or charger. The destination handset is then connected to the outside call. You can press INT to switch between the outside call (Outside call displays) and the intercom call (Intercom displays). The destination handset can end the intercom call by pressing OFF, or by placing the handset back in the telephone base or charger. The outside call continues with the original system handset. Phonebook The phonebook can store up to 50 entries, which are shared by all handsets. Each entry may consist of a telephone number up to 30 digits, and a name up to 15 characters. Add a phonebook entry 1. Enter the number when the phone is not in use. Press MENU, then go to Step 3.

-OR-

Press MENU when the phone is not in use, then scroll to Phonebook and press SELECT. Press SELECT again to choose Add new entry. 2. Use the dialing keys to enter the number.

-OR-

Copy a number from the redial list by pressing REDIAL and then press q, p or REDIAL repeatedly to select a number. Press SELECT to copy the number. 3. Press SELECT to move on to enter the name. 4. Use the dialing keys to enter the name. Additional key presses show other characters of that particular key. 5. Press SELECT to save. While entering names and numbers, you can:

Press DELETE to backspace and erase a digit or character. Press and hold DELETE to erase the entire entry. Press q or p to move the cursor to the left or right. Press and hold PAUSE to insert a dialing pause

(for entering numbers only). Press 0 to add a space (for entering names only). Press to add

( appears) (for entering phone numbers only).

( appears) or to add #

3. From this intercom call, you have the following options:

You can let the destination handset join you on the outside call in a three-way conversation. Press and hold INT on the originating handset. Review a phonebook entry Entries are sorted alphabetically. 1. Press 2. Scroll to browse through the phonebook, or use the dialing keys to start a name search. when the phone is not in use. For C-UL compliance only Mesures de scurit importantes Afin de rduire les risques dincendie, de blessures corporelles ou dlectrocution, suivez toujours ces mesures prventives de base lorsque vous utilisez votre tlphone :

1. 2. Observez toutes les instructions et mises en garde inscrites Lisez et comprenez bien toutes les instructions. sur lappareil. 3. Dbranchez ce tlphone de la prise murale avant de le nettoyer. Nutilisez pas de nettoyeurs liquides ni en arosol. Nutilisez quun chiffon doux et lgrement humect. 4. ATTENTION: Ne pas installer le socle tlphonique une hauteur suprieure 2 mtres. 5. Nutilisez pas ce produit prs de leau, tel que prs dun bain, dun lavabo, dun vier de cuisine, dun bac de lavage ou dune piscine, ou dans un sous-sol humide ou sous la douche. 6. Ne dposez pas ce tlphone sur un chariot, support 7. 8. ou table chancelants. Lappareil pourrait tomber et tre srieusement endommag. vitez dinstaller le systme tlphonique dans les endroits soumis une temprature extrme, la lumire directe du soleil ou proximit immdiate dautres appareils lectriques ou lectroniques. Protgez votre tlphone contre les sources dhumidit, la poussire, les vapeurs et les liquides corrosifs. Le botier de lappareil est dot de fentes et douvertures daration situes larrire ou en dessous. Afin dempcher la surchauffe, ces ouvertures ne doivent pas tre obstrues en plaant lappareil sur un lit, divan, tapis ou autre surface similaires. Ne placez pas cet appareil proximit dun lment de chauffage ni dune plinthe lectrique. De plus, ne linstallez pas dans une unit murale ou un cabinet ferm qui ne possde pas daration adquate. 9. Ne faites fonctionner cet appareil quavec le type dalimentation indiqu sur les tiquettes de lappareil. Si vous ne connaissez pas le voltage de votre maison, consultez votre marchand ou votre fournisseur dlectricit. 10. Ne dposez rien sur le cordon dalimentation. Installez cet appareil dans un endroit scuritaire, l o personne ne pourra trbucher sur la ligne dalimentation ni le cordon tlphonique modulaire. 11. Ninsrez jamais dobjets travers les fentes et ouvertures de cet appareil, car ils pourraient toucher des points de tension dangereux ou court-circuiter des pices, ce qui constituerait un risque dincendie ou dlectrocution. Nchappez pas de liquides dans lappareil. 12. Afin de rduire les risques dlectrocution, ne dmontez pas lappareil, mais apportez-le plutt un centre de service qualifi sil doit tre rpar. En enlevant le couvercle, vous vous exposez des tensions dangereuses ou autres dangers similaires. Un remontage inadquat peut tre lorigine dune lectrocution lors dune utilisation ultrieure de lappareil. Dbranchez lappareil avant de procder au nettoyage. Utilisez un chiffon humide et doux. 13. Ne surchargez pas les prises de courant et les rallonges. 14. Dbranchez cet appareil de la prise de courant et communiquez avec le dpartement de service la clientle de VTech dans les cas suivants :

Lorsque le cordon dalimentation est endommag ou corch. Si du liquide a t chapp dans lappareil. Si lappareil a t expos une source dhumidit telle que la pluie ou leau. Si le produit ne fonctionne pas normalement en respectant les instructions de fonctionnement. Rglez uniquement les commandes indiques dans le les instructions de fonctionnement. Les rglages incorrects des autres commandes pourraient provoquer un dommage qui pourrait exiger un travail exhaustif de la part dun technicien autoris afin de rtablir le fonctionnement normal de lappareil. Si le produit a t chapp et que le socle et/ou le combin a t endommag. Si le produit affiche une nette diminution de sa performance. 15. vitez dutiliser un tlphone (autre quun sans fil) pendant un orage. Les clairs peuvent tre lorigine dune lectrocution. 16. Nutilisez pas le tlphone pour rapporter une fuite de gaz proximit de la fuite. En certaines circonstances, une flammche pourrait tre provoque lorsque ladaptateur est branch une prise de courant, ou lorsque le combin est dpos sur le socle. Ceci est un vnement commun associ la fermeture dun circuit lectrique. Lutilisateur ne devrait pas brancher le tlphone une prise de courant, et ne devrait pas dposer le combin charg sur le socle, si le tlphone se trouve proximit dun endroit comportant des concentrations de gaz inflammables, moins que la ventilation soit adquate. Une flammche dans un tel endroit pourrait provoquer un incendie ou une explosion. De tels environnements peuvent comprendre: des endroits o lon utilise de loxygne mdical sans ventilation adquate; des gaz industriels (dissolvants de nettoyage, des vapeurs dessence, etc.); une fuite de gaz naturel, etc. 17. Ne placez que le combin de votre tlphone prs de votre oreille lorsquen mode de conversation. 18. Ces adaptateurs ont t conus pour tre orients en position verticale ou monts au sol. Les broches ne sont pas conues pour maintenir ladaptateur en place si celui-ci est barnch dans une prise au plafond ou sous une table/

armoire. 19. Pour le MATERIEL RACCORDE PAR PRISE DE COURANT, le socle de prise de courant doit etre installe a proximite du materiel et doit etre aisement accessible. 20. MISE EN GARDE: Il peut y avoir un risque dexplosion si vous utilisez le mauvais type de piles pour le tlphone. Nutilisez que les piles rechargeable inclus ou les piles de rechange (BT162342/BT262342). Nincinrez pas les piles. Celles-ci risqueraient dexploser. Mettre au rebut les batteries usages conformment aux instructions du fabricant. Dbrancher les lignes tlphoniques avant le remplacement des piles. vite dutiliser la batterie dans les conditions suivantes:

des tempratures extrmes faibles ou leves auxquelles une batterie peut tre soumise pendant lutilisation, le stockage ou le transport. remplacement dune batterie par un type incorrect pouvant supprimer une protection. mise au rebut dune batterie dans un feu ou dans un four chaud, ou crasement mcanique ou coupure dune batterie, susceptible de provoquer une explosion. maintien dune batterie dans un environnement trs haute temprature pouvant provoquer une explosion ou la fuite de liquide ou de gaz inflammables. batterie soumise une pression de lair extrmement faible pouvant provoquer une explosion ou la fuite de liquide ou de gaz inflammables. 21. Nutilisez que les adaptateurs inclus avec ce produit. Lutilisation dun adaptateur dont la polarit ou la tension serait inadquate risque dendommager srieusement le produit et mettre votre scurit en pril. 22. La plaque signaltique applique est situe au bas ou proximit du produit. CONSERVEZ CES INSTRUCTIONS

-OR-

1. Press MENU when the phone is not in use. 2. Scroll to Phonebook, and then press SELECT. 3. Scroll to Review, and then press SELECT. 4. Scroll to browse through the phonebook. Delete a phonebook entry 1. When the desired entry displays, press DELETE. 2. When the handset displays Delete entry?, press SELECT. Edit a phonebook entry 1. Search for or review the phonebook entries

(see Review a phonebook entry). 2. When the desired entry displays, press SELECT. 3. Use the dialing keys to edit the number, then press SELECT. 4. Use the dialing keys to edit the name, then press SELECT to save. Dial a phonebook entry 1. Search for or review the phonebook entries

(see Review a phonebook entry). 2. When the desired entry appears, press or to dial. Caller ID If you subscribe to caller ID service, information about each caller appears after the first or second ring. If you answer a call before the caller information appears on the screen, it will not be saved in the caller ID log. The caller ID log stores up to 50 entries. Each entry has up to 24 digits for the phone number and 15 characters for the name. If the telephone number has more that 15 digits, only the last 15 digits appear. If the name has more than 15 characters, only the first 15 characters are shown and saved in the caller ID log. Review a caller ID log entry 1. Press CID when the phone is not in use. 2. Scroll to browse through the caller ID log.

-OR-

1. Press MENU when the phone is not in use. 2. Scroll to Caller ID log, and then press SELECT. 3. Press SELECT to choose Review. 4. Scroll to browse through the caller ID log. Press # repeatedly to show different dialing options. Press 1 repeatedly if you need to add or remove 1 in front of the phone number. Pile Nutilisez que la pile incluse ou lquivalent. Ne jetez pas la pile au feu. Vrifiez les instructions spcifiques de mise aux rebus auprs des autorits locales. Nouvrez pas et ne mutilez pas la pile. Llectrolyte qui sen chapperait est corrosif et pourrait causer des brlures ou des blessures aux yeux ou la peau. Llectrolyte est toxique si aval. Soyez prudents lorsque vous manipulez les piles afin dviter les courts-circuits provoqus par des matriaux conducteurs. Rechargez la pile incluse avec cet appareil, selon les instructions et limites spcifies dans ce guide dutilisation. Stimulateurs cardiaques implants dans lorganisme Les simulateurs cardiaques (sapplique uniquement aux tlphones numriques sans fil) :

Lorganisme Wireless Technology Research, LLC (WTR), une firme de recherche indpendante, a men une valuation pluridisciplinaire des interfrences entre les tlphones sans fil portatifs et les stimulateurs cardiaques implants dans lorganisme. Appuye par lAdministration des aliments et drogues (FDA) des tats-Unis, la firme WTR recommande aux mdecins :

Avis aux dtenteurs de stimulateurs cardiaques Ils doivent tenir le tlphone sans fil une distance dau moins six pouces du stimulateur cardiaque. Ils ne doivent PAS placer le tlphone sans fil directement sur le stimulateur cardiaque, tel que dans une poche de chemise, lorsque celui-ci est en marche. Ils doivent utiliser le tlphone sans fil en lappuyant sur loreille qui se trouve dans la direction oppose au stimulateur cardiaque. Ltude effectue par lorganisme WRS na pas identifi de risque pour les dtenteurs de simulateurs cardiaques causs par les gens qui utilisent un tlphone sans fil proximit de ceux-ci. propos des tlphones sans fil Confidentialit : Les mmes caractristiques qui constituent des avantages pour les tlphones sans fil affichent galement des restrictions. Les appels tlphoniques sont transmis entre le combin sans fil et le socle par le biais dondes radio ; il y a donc la possibilit que vos conversations tlphoniques sans fil soient interceptes par des quipements de rception radio se trouvant dans la porte du combin sans fil. Pour cette raison, vous ne devez pas percevoir les communications tlphoniques sans fil comme tant aussi confidentielles que celles des tlphones cordons. Alimentation lectrique : Le socle de ce tlphone sans fil doit tre branch une prise lectrique fonctionnelle. La prise lectrique ne doit pas tre contrle par un interrupteur mural. Les appels ne pourront pas tre effectus du combin sans fil si le socle est dbranch ou mis hors tension ou si le courant est coup. Possibilit dinterfrences aux tlviseurs : Certains tlphones sans fil fonctionnent sur des frquences pouvant causer des interfrences aux tlviseurs et aux magntoscopes. Pour rduire ou prvenir de telles interfrences, ne placez pas le socle du tlphone sans fil prs ou sur un tlviseur ou magntoscope. Sil y a prsence de parasites, il est conseill dloigner le tlphone sans fil du tlviseur ou du magntoscope afin de rduire possiblement les interfrences. Piles rechargeables : Manipulez les piles avec soin afin de ne pas les court-circuiter avec des bagues, bracelets ou cls. Les piles ou le conducteur peut surchauffer et causer des blessures. Respectez la polarit adquate entre la pile et le chargeur. Les bloc-piles rechargeables lhydrure mtallique de nickel

: Jetez ces blocs-piles de manire cologique et scuritaire. Ne les incinrez pas et ne les percez pas. Tel que les autres piles de ce type, elles pourraient dgager une matire toxique qui peut causer des blessures corporelles si elles sont brles ou perces. Missed call indicator When there are calls that have not been reviewed in the caller ID log, the handset displays XX missed calls. Each time you review a caller ID log entry marked NEW, the number of missed calls decreases by one. When you have reviewed all the missed calls, the missed call indicator no longer displays. If you do not want to review the missed calls one by one, press and hold CANCEL on the idle handset to erase the missed call indicator. All the entries are then considered old. Dial a caller ID log entry 1. Search for or review the caller ID log entries

(see Review a caller ID log entry). Sound settings Key tone You can turn the key tone on or off. 1. Press MENU when the handset is not in use. 2. Scroll to Settings and then press SELECT. 3. Scroll to choose Key tone, then press SELECT. 4. Scroll to chooseOn or Off, then press SELECT to save. Ringer tone You can choose from different ringer tones for each handset. 1. Press MENU when the handset is not in use. 2. Scroll to Ringers and then press SELECT. 3. Scroll to choose Ringer tone, then press SELECT. 2. When the desired entry appears, press or 4. Scroll to sample each ringer tone, then press to dial. SELECT to save. Save a caller ID log entry to the phonebook 1. Search for or review the caller ID log entries

(see Review a caller ID log entry). 2. When the desired caller ID log entry displays, press SELECT. 3. Use the dialing keys to edit the number, if necessary. Then press SELECT. 4. Use the dialing keys to edit the name, if necessary. Then press SELECT to save. Delete the caller ID log entries 1. Search for or review the caller ID log entries

(see Review a caller ID log entry). 2. When the desired caller ID log entry displays, press DELETE. To delete all caller ID log entries:

1. Press MENU when the phone is not in use. 2. Scroll to Caller ID log and then press SELECT. 3. Scroll to Delete all and then press SELECT. 4. When the screen shows Delete all?, press SELECT to confirm. The RBRC SEAL The RBRC seal on the nickel-metal hydride battery indicates that VTech Communications, Inc. is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful lives, when taken out of service within the United States and Canada. The RBRC program provides a convenient alternative to placing used nickel-metal hydride batteries into the trash or municipal waste, which may be illegal in your area. VTechs participation in RBRC makes it easy for you to drop off the spent battery at local retailers participating in the RBRC program or at authorized VTech product service centers. Please call 1 (800) 8 BATTERY for information on Ni-MH battery recycling and disposal bans/restrictions in your area. VTechs involvement in this program is part of its commitment to protecting our environment and conserving natural resources. The RBRC Seal and 1 (800) 8 BATTERY are registered trademarks of Call2recycle, Inc. FCC, ACTA and IC regulations FCC Part 15 NOTE: This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this telephone. To ensure safety of users, the FCC/ISEDC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC/ISEDC criteria. The handset may be safely held against the ear of the user. The telephone base shall be installed and used such that parts of the users body other than the hands are maintained at a distance of approximately 20 cm (8 inches) or more. This Class B digital apparatus complies with Canadian requirement:

CAN ICES-3 (B)/NMB-3(B). FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US:AAAEQ##TXXXX. This identifier must be provided to your telephone service provider upon request. NOTE: If you turn off the ringer volume, you will not hear ringer tone samples. Ringer volume You can adjust the handset ringer volume level, or turn the ringer off. 1. Press MENU when the handset is not in use. 2. Scroll to Ringers and then press SELECT. 3. Press SELECT again to choose Ringer volume. 4. Press q or p to sample each volume level, then press SELECT to save. NOTE: When the ringer volume is set to Off, the handset still rings when you press FIND HANDSET at the telephone base. Temporary ringer silencing When the telephone is ringing, you can temporarily silence the ringer without disconnecting the call. The next call rings normally at the preset volume. To silence the handset ringer:

Press OFF or MUTE on the handset. The handset displays and Ringer muted briefly. Quiet mode You can turn on the quiet mode for a period of time. During this period, all tones (except paging tone) and call screening are muted. 1. Press and hold is not in use. on the handset when it 2. Use the dialing keys (0-9) to enter the duration, and then press SELECT to save. To turn off the quiet mode, press and hold on the handset when it is not in use. The plug and jack used to connect this equipment to premises wiring and the telephone network must comply with applicable Part 68 rules and technical requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. An RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two lines. See the installation instructions in the users manual. The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone line and still have them ring when you are called. The REN for this product is encoded as the 6th and 7th characters following the US: in the product identifier (e.g., if ## is 03, the REN is 0.3). In most, but not all areas, the sum of all RENs should be five (5.0) or less. For more information, please contact your telephone service provider. This equipment must not be used with Party Lines. If you have specially wired alarm dialing equipment connected to your telephone line, ensure the connection of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone service provider or a qualified installer. If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Replacement to this telephone equipment can only be made by the manufacturer or its authorized agents. For replacement procedures, follow the instructions outlined under the Limited warranty. If this equipment is causing harm to the telephone network, the telephone service provider may temporarily discontinue your telephone service. The telephone service provider is required to notify you before interrupting service. If advance notice is not practical, you will be notified as soon as possible. You will be given the opportunity to correct the problem and the telephone service provider is required to inform you of your right to file a complaint with the FCC. Your telephone service provider may make changes in its facilities, equipment, operation, or procedures that could affect the proper functioning of this product. The telephone service provider is required to notify you if such changes are planned. If this product is equipped with a corded or cordless handset, it is hearing aid compatible. If this product has memory dialing locations, you may choose to store emergency telephone numbers (e.g., police, fire, medical) in these locations. If you do store or test emergency numbers, please:

Remain on the line and briefly explain the reason for the call before hanging up. Perform such activities in off-peak hours, such as early morning or late evening. Industry Canada This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Privacy of communications may not be ensured when using this telephone. The term IC: before the certification/registration number only signifies that the Industry Canada technical specifications were met. The Ringer Equivalence Number (REN) for this terminal equipment is 0.1. The REN indicates the maximum number of devices allowed to be connected to a telephone interface. The termination of an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices not exceed five. This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Retrieve voicemail from telephone service Voicemail is a feature available from most telephone service providers. It may be included with your telephone service, or may be optional. Fees may apply. Retrieve voicemail When you received a voicemail, the handset displays and New voicemail. To retrieve, you typically dial an access number provided by your telephone service provider, and then enter a security code. Contact your telephone service provider for instructions on how to configure the voicemail settings and listen to messages. NOTE: After you have listened to all new voicemail messages, the indicators on the handset turn off automatically. Set your voicemail number You can save your access number on each handset for easy access to your voicemail. After you saved the voicemail number, you can press and hold 1. Press MENU when the phone is not in use. 2. Scroll to Settings and then press SELECT. 3. Scroll to Voicemail # and then press SELECT. 4. Use the dialing keys to enter the voicemail to retrieve voicemail. number (up to 30 digits). 5. Press SELECT to save. Clear the new voicemail indicators If you have retrieved your voicemail while away from home, and the handset still displays the new voicemail indicators, use this feature to clear the indicators. NOTE: This feature clears the indicators only, it does not delete your voicemail messages. 1. Press MENU when the phone is not in use. 2. Scroll to Settings and then press SELECT. 3. Scroll to Clr voicemail and then press SELECT. 4. Press SELECT again to confirm. You hear a confirmation tone. California energy commission battery charging testing instructions This telephone is set up to comply with the energy-conserving standards right out of the box. These instructions are intended for California Energy Commission (CEC) compliance testing only. When the CEC battery charging testing mode is activated, all telephone functions, except battery charging, will be disabled. To activate the CEC battery charging testing mode:

1. Unplug the telephone base power adapter from the power outlet. Make sure all handsets are plugged with charged batteries before proceeding. 2. While you press and hold /FIND HANDSET, plug the telephone base power adapter back to the power outlet. 3. After about 20 seconds, when the IN USE light starts flashing, release /FIND HANDSET and then press it again within 2 seconds. When the phone successfully enters the CEC battery charging testing mode, all handsets display To register HS and See manual alternatively. When the phone fails to enter this mode, repeat Step 1 through Step 3 above. To deactivate the CEC battery charging testing mode:

1. Unplug the telephone base power adapter from the power outlet, and then plug it back in. Then the telephone base is powered up as normal. 2. Place the handset in the telephone base to register it back. The handset displays Registering... The handset show Registered and you hear a beep when the registration process completes. The registration process takes about 60 seconds to complete. Limited Warranty What does this limited warranty cover?

The manufacturer of this VTech product, VTech Communications, Inc. (VTech), warrants to the holder of a valid proof of purchase (Consumer or you) that the Product and all accessories provided by VTech in sales package

(Product) are free from material defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with operating instructions. This limited warranty extends only to the Consumer for Products purchased and used in the United States of America and Canada. What will VTech Communications do if the Product is not free from material defects in materials and workmanship during the limited warranty period (Materially Defective Product)?

During the limited warranty period, VTechs authorized service representative will replace at VTechs option, without charge, a Materially Defective Product. If we choose to replace the Product, we may replace it with a new or refurbished Product of the same or similar design. VTech will return replacement products to you in working condition. VTech will retain defective parts, modules, or equipment. Replacement of the Product, at VTechs option, is your exclusive remedy. You should expect the replacement to take approximately 30 days. How long is the limited warranty period?

The limited warranty period for the product extends for ONE (1) YEAR from date of purchase (90 days on products purchased as Refurbished*). This limited warranty also applies to replacement Products for a period of either (a) 90 days from the date the replacement Product is shipped to you or (b) the time remaining on the original one-year limited warranty

(90-day limited warranty on products that are purchased as Refurbished*), whichever is longer.

*Refurbished products purchased from our online store carry a 90-day replacement warranty. ECO mode This power conserving technology reduces power consumption for optimal battery performance. The ECO mode activates automatically whenever the handset is synchronized with the telephone base. General product care Taking care of your telephone Your cordless telephone contains sophisticated electronic parts, so it must be treated with care. Avoid rough treatment Place the handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it. Avoid water Your telephone can be damaged if it gets wet. Do not use the handset outdoors in the rain, or handle it with wet hands. Do not install the telephone base near a sink, bathtub or shower. Electrical storms Electrical storms can sometimes cause power surges harmful to electronic equipment. For your own safety, take caution when using electrical appliances during storms. Cleaning your telephone Your telephone has a durable plastic casing that should retain its luster for many years. Clean it only with a dry non-abrasive cloth. Do not use dampened cloth or cleaning solvents of any kind. What is not covered by this limited warranty?

This limited warranty does not cover:

1. Product that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water or other liquid intrusion; or Product that has been damaged due to repair, alteration or modification by anyone other than an authorized service representative of VTech; or Product to the extent that the problem experienced is caused by signal conditions, network reliability or cable or antenna systems; or Product to the extent that the problem is caused by use with non-VTech electrical accessories; or Product whose warranty/quality stickers, Product serial number plates or electronic serial numbers have been removed, altered or rendered illegible; or Product purchased, used, serviced, or shipped for repair from outside the United States, or used for commercial or institutional purposes (including but not limited to Products used for rental purposes); or Product returned without valid proof of purchase (see 2 below); or Charges for installation or set up, adjustment of customer controls, and installation or repair of systems outside the unit. 2. 3. 4. 5. 6. 7. 8. How do you get warranty service?

To obtain warranty service in the United States of America, please visit our website at www.vtechphones.com or call 1 (800) 595-9511 for instructions regarding where to return the Product. In Canada, go to phones.vtechcanada.com or dial 1 (800) 267-7377. NOTE: Before calling for service, please review the users manual - a check of the Products controls and features may save you a service call. Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of Product(s) to the service location. VTech will return replaced product under this limited warranty to you, transportation, delivery or handling charges prepaid. VTech assumes no risk for damage or loss of the Product in transit. What must you return with the Product to get warranty service?

1. Return the entire original package and contents including the Product to the VTech service location along with a description of the malfunction or difficulty;

2. 3. Include valid proof of purchase (sales receipt) identifying the Product purchased (Product model) and the date of purchase or receipt; and Provide your name, complete and correct mailing address, and telephone number. Other limitations This warranty is the complete and exclusive agreement between you and VTech. It supersedes all other written or oral communications related to this product. VTech provides no other warranties for this product. The warranty exclusively describes all of VTechs responsibilities regarding the product. There are no other expressed warranties. No one is authorized to make modifications to this warranty and you should not rely on any such modification. State Law Rights: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Limitations: Implied warranties, including those of fitness for a particular purpose and merchantability (an unwritten warranty that the product is fit for ordinary use) are limited to one year from date of purchase. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. latest Need help?

For operations and guides to help you using your telephone, and for the information and supports, go and check the online help topics and online FAQs. Use your smartphone or mobile device to access our online help. Go to https://help.vtechphones.com/CS6719 (US); OR https://phones.vtechcanada.com/en/support/

general/manuals?model=CS6719 (Canada) Scan the QR code on the right. Launch the camera app or QR code scanner app on your tablet. smartphone or Hold the devices camera up to the QR code and frame it. Tap the notification to trigger the redirection of the online help.

- If the QR code is not clearly displayed, adjust your cameras focus by moving your device closer or further away until it is clear. You can also call our Customer Support at 1

(800) 595-9511

[in US] or 1 (800) 267-7377 [in Canada] for help.

(US)

(CA) Recycle this product when you are done with it Scan the QR code on the right or visit www.vtechphones.com/recycle.

(For the US only) In no event shall VTech be liable for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost profits or revenue, inability to use the product, or other associated equipment, the cost of substitute equipment, and claims by third parties) resulting from the use of this product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Please retain your original sales receipt as proof of purchase Disclaimer and Limitation of Liability VTech Communications, Inc. and its suppliers assume no responsibility for any damage or loss resulting from the use of this users manual. VTech Communications, Inc. and its suppliers assume no responsibility for any loss or claims by third parties that may arise through the use of this product. Company: VTech Communications, Inc. Address: 9020 SW Washington Square Road - Ste 555 Tigard, OR 97223, United States Phone: 1 (800) 595-9511 in the U.S. or 1 (800) 267-7377 in Canada Technical specifications Frequency control Transmit frequency Crystal controlled PLL synthesizer Handset: 1921.536-1928.448 MHz Telephone Base: 1921.536-1928.448 MHz Channels DECT channel: 5 Nominal effective range Maximum power allowed by FCC and IC. Actual operating range may vary according to environmental conditions at the time of use. Power requirement Memory Handset: 2.4V Ni-MH battery Telephone base: DC 6V @ 0.4A Charger: DC 6V @ 0.4A Phonebook: 50 memory locations;

up to 30 digits and 15 characters Caller ID log: 50 memory locations;

up to 24 digits and 15 characters Compatible with Hearing Aid T-Coil T TIA-1083 Telephones identified with this logo have reduced noise and interference when used with most T-coil equipped hearing aids and cochlear implants. The TIA-1083 Compliant Logo is a trademark of the Telecommunications Industry Association. Used under license. The ENERGY STAR program (www. energystar.gov) recognizes and encourages the use of products that save energy and help protect our environment. We are proud to mark this product with the ENERGY STAR label indicating it meets the latest energy efficiency guidelines.

80-9065-00-12/80-9065-01-12/80-9065-02-12/80-9066-00-13 EW7W401A80-906500 0.1A DC 6V 400mA EW780-9065-00A EW7W401A80-906500 0.1A DC 6V 400mA EW780-9065-00A

VTech Telecommunications Ltd Add: 23/F Tai Ping Ind Center Block 1 57 Ting Kok Rd Tai Po NT, Hong Kong Telephone: (852)2680 5398 Fax:(852)2680 5252 E-mail: Michael_Tsui@vtech.com ATTESTATION STATEMENT Date: 2023-10-10 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(5)(i), (ii) Filing FCC ID: EW780-9065-00A VTech Telecommunications Ltd certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. VTech Telecommunications Ltd certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Signature Michael Tsui Approbation Supervisor

VTech Telecommunications Ltd Add: 23/F Tai Ping Ind Center Block 1 57 Ting Kok Rd Tai Po NT, Hong Kong Telephone: (852)2680 5398 Fax: (852)2680 5252 E-mail: Michael_Tsui@vtech.com Date: 2023-10-10 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:

The RF chip, model RTL8761ATV, installed in our product DECT 6.0 cordless telephone (Base), Model: CS6719-2, CS6719, CS6719-15, CS6719-16, CS671Z-XY, FCC ID: EW780-9065-00A, supports BDR (GFSK), EDR (/4-DQPSK, 8DPSK) and BLE functions. For use in America and this chip will not support/enable BLE. The BLE has been shielded by the manufacturer using the software, the end user has no capability to activate it. Sincerely Yours, Signature Michael Tsui Approbation Supervisor

VTech Telecommunications Ltd Add: 23/F Tai Ping Ind Center Block 1 57 Ting Kok Rd Tai Po NT, Hong Kong Telephone: (852)2680 5398 Fax: (852)2680 5252 E-mail: Michael_Tsui@vtech.com FCC Authorization Date: 2023-10-10 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We, VTech Telecommunications Ltd, the undersigned, Hereby authorizes China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature Michael Tsui Approbation Supervisor QA-FR-170-B

VTech Telecommunications Ltd Add: 23/F Tai Ping Ind Center Block 1 57 Ting Kok Rd Tai Po NT, Hong Kong Telephone: (852)2680 5398 Fax: (852)2680 5252 E-mail: Michael_Tsui@vtech.com FCC Confidential Authorization Date: 2023-10-10 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: EW780-9065-00A In accordance with Sections 0.457 and 0.459 of the Commissions Rules, VTech Telecommunications Ltd hereby requests long-term confidential treatment of information accompanying this application as outlined below:

Block Diagram Schematics Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature Michael Tsui Approbation Supervisor

VTech Telecommunications Ltd Aug. 14, 2023 To whom it may concern, FCC-Multiple Models Confirmation Letter I, the undersigned, hereby confirm that the family models are listed in the following table. These models are identical as follows:

Electrical designs, including software & firmware PCB layout Others, please specify Construction design/Physical design/Enclosure The only differences between these models are the follows for marketing purpose:

Color Trade name Others, please specify Package type, no. of Handset and Charger. Cosmetic details Model number Suffix ( X,Y, Z in CS671Z-XY ) represents Color code Others, please specify Packing configuration Z= any alphanumeric character is presenting different package type (material). X= any alphanumeric character or blank is presenting number of Handset and extra Charger. Y= any alphanumeric character or blank is presenting different color of enclosure.

,but models with suffix (

X,Y,Z

) are identical in:

Electrical designs, including software & firmware PCB layout Construction design/Physical design/Enclosure Others, please specify For the product subject to authorization under FCC Declaration of Conformity:

In addition, it is to confirm that all the below information 1) The U.S. responsible party, 2) FCC label artworks and location, 3) FCC required statement in the user manual Are the same but different in the following model numbers only:

Item # New Model Model Number 1 2 3 4 5 YES YES YES YES YES CS6719 CS6719-2 CS6719-15 CS6719-16 CS671Z-XY Trade Name vtech vtech vtech vtech vtech Remarks 1HS+1BS 2HS+1BS+1charger 1HS+1BS 1HS+1BS XHS+1BS+(X-1)charger The sample(s) being submitted to China Certification ICT Co., Ltd (Dongguan) for conformity assessment is CS6719-2 of the above list. ALL ABOVE models FCC ID Are: EW780-9065-00A VTech Telecommunications Ltd Regards, Michael Tsui Approbation Supervisor

U.S. AGENT LETTER OF ATTESTATION Date: 2023-03-20 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 2.911(d)(7) Filing VTech Telecommunications Ltd certifies that, as of the date of the filing of the application, VTech Communications, Inc. is our designated U.S. agent for service of process for the FCC ID. VTech Telecommunications Ltd accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-

related proceeding involving the equipment. VTech Communications, Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the FCC ID. Designated U.S. Agent Information:

Company Name: VTech Communications, Inc. Address: 9020 SW Washington Square Road, Tigard OR 97223 Agent FRN : 0033411265 Tel.: +1(503) 596-1212 Email: cconrad@vtechphones.com Signed by: Chris Conrad Signature:

Applicant Company Name: VTech Telecommunications Ltd Address: 23/F Tai Ping Ind Center Block 1 57 Ting Kok Rd Tai Po NT, Hong Kong Applicant FRN: 0015973951 Tel: (852)2680 5398 Email: Michael_Tsui@vtech.com Signed by: Michael Tsui Signature: