all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 4.07 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | Test Setup Photos | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Cover Letter(s) | |||||||
1 | RF Exposure Info | |||||||
1 | Test Report |
1 | User Manual | Users Manual | 4.07 MiB |
Go to www.vtechphones.com to register your product for enhanced warranty support and the latest VTech product news. BC DM271 DM271-102 Wireless Monitoring System with Safe & Sound Digital Audio Monitor Congratulations on purchasing your new VTech product. Before using this product, please read Important safety instructions. For support, shopping, and everything new at VTech, visit our website at www.vtechphones.com. Register online to get an additional 3-month warranty!
Visit www.vtechphones.com. Baby Monitor Overview Parent unit overview P Baby unit overview Sensor unit Magnet unit a b c c d e f g a b 1
> 1 cm
(0.4 inch)
> 1 cm
(0.4 inch)
> 1 cm
(0.4 inch)
> 1 cm
(0.4 inch) Whats in the box Spacer for sensor unit Spacers for magnet unit sensor alert Double-sided mounting tapes Screws x 2 Parent unit Baby unit Small screw x 2 1 set for DM271-102 Battery compartment cover Baby unit adapter 1 2 3 4 5 6 7 Projector When it is on, it projects some image patterns to the user environment. Microphone Control key panel power on page volume +
Press to power on. Press and hold to power off. Press to start or stop paging parent unit. Press to increase the listening volume or lullaby volume. volume -
Press to decrease the listening volume or lullaby volume. Press to turn on or off the projector and lullaby. Magnetic base Speaker Temperature sensor Power jack sensor alert c d e f g h i j k l m sensor alerts Press to turn on or off the sensor alert system. 2 Microphone 3 Visual sound indicator The visual sound indicator has two functions. One is to show the sound level detected by the baby unit. The other one is to show the volume level during speaker volume setting. Sound level detected by the baby unit One to three green lights indicate a moderate sound level detected by the baby unit. Additional red lights indicate a higher sound level detected by the baby unit (e.g. baby crying loudly). Speaker volume level One to three green lights indicate Level 1 to Level 3 of the speaker volume setting. Additional red lights indicate Level 4 to Level 5 of the speaker volume setting. Battery Parent unit adapter 4 LCD panel Users manual Users manual Installation guide Users manual Installation guide 1 set for DM271/DM271-102 Parent unit display overview Parent unit display icons Connection status displays when strong signal strength is detected between the baby unit and the parent unit. displays when moderate signal strength is detected between the baby unit and the parent unit. displays when the weak link signal strength is detected between the baby unit and the parent unit. flashes when the link between the baby unit and the parent unit is lost. Projector and lullaby Displays when the lullaby and the projector of the baby unit is on. Projector only Displays when the projector of the baby unit is on. Sound alert Displays when the sound alert of the parent unit is turned on. Flashes when there are sounds detected from the baby unit. Vibration alert Displays when the vibration alert of the parent unit is turned on. Flashes when there are loud sounds detected from the baby unit. Mute Displays when the volume is turned off. Sensor The door, window, or medicine cabinet is opened; or there is a motion detected in the monitored area. Sensor alerts on Sensor alert system is turned on Battery status animates when the battery is charging. displays solid when the battery is fully charged. flashes when battery is in low level and needs charging. No battery icon displays when there is no battery installed. Parent unit display screen messages BATTERY LOW AT PARENT UNIT The parent unit uses only the rechargeable battery pack and it needs to be recharged. BATTERY LOW AT SENSOR X*
The sensor battery is low and it needs to be replaced. SENSOR X*
is open /
MOTION X*
detected motion NO LINK TO BABY UNIT PAGING Saved The monitored door, window, or medicine cabinet is opened, or there is a motion detected in the monitored area. When the link between the parent unit and the baby unit is lost continuously for over 10 seconds. All idle parent units are being paged by the baby unit. Your selection has been saved. SEARCHING... The parent unit is out of range of the baby unit, or the baby unit is out of power. TALKBACK
<X> new event(s) 68oF/20oC 90oF/32oC TOO HOT /
TOO COLD The parent unit is talking to the baby unit. The number of new sensor activity(ies). The real-time temperature of the baby unit. The temperature of the baby unit is too high or too low.
* Sensor X or Motion X refer to the sensors name. X X refers to the system-assigned number of the sensor. You can edit the sensors name to your preferred name. See Rename the sensor. Using the baby monitor Power on or off the baby unit Press power on to turn on the baby unit. The power on lights up. Press and hold power on again to power off the baby unit. The power on turns off. Adjust the sound sensitivity of the baby unit You can choose to hear sounds from the baby unit all the time, or to hear sounds that exceed a certain level. You can use the parent unit to adjust the microphone sensitivity of your baby unit. The higher the sensitivity level, the more sensitive the baby unit is in detecting sounds for transmitting to the parent unit. The sound sensitivity is preset to Level 5. Sound sensitivity table for reference Display Sensitivity Description Power on or off the parent unit to power on the parent unit. The Press screen turns on. Press and hold parent unit. The screen turns off. again to power off the sensor alert NOTE The parent unit powers on automatically once it is connected to AC power or battery installed. The baby unit also powers on automatically once connected to AC power. Level 5 Level 4 Level 3 Level 2 High sensitivity Low sensitivity High sensitivity level The parent unit speaker is constantly on, and you will hear all sounds (including background noises) from your babys room. Medium high sensitivity level The parent unit speaker turns on for soft babbling and louder sounds from your baby. It remains quiet when your baby sleeps soundly. Medium sensitivity level The parent unit speaker turns on for loud babbling and louder sounds from your baby. It remains quiet when your baby makes soft sounds. Medium low sensitivity level The parent unit speaker turns on for crying and louder sounds from your baby. It remains quiet when your baby makes soft sounds. Low sensitivity level The parent unit speaker turns on for loud crying or screeching sounds from your baby. It remains quiet when your baby makes soft sounds. Adjust the speaker volume for baby unit Press volume + or volume - on the baby unit at any time. Level 1 Adjust the speaker volume for parent unit You can adjust the speaker volume from VOLUME 1 toto VOLUME 5, or turn it off. The speaker volume is preset to VOLUME 3. Press volume + or volume - when the parent unit is not in use. When the speaker volume is set to off, the screen displays
. 1. 2. 3. 4. Press menu when the parent unit is not in use. Press select. Press volume + or volume - to choose the sensitivity level. Press select to confirm your selection. 5 menu Press to enter the settings menu while idle. NOTE To enter the sensitivity menu of the parent unit, the baby unit must be turned on. Set date and time You can set the date and time to be displayed on the idle parent unit. 1. 2. Press menu when the parent unit is not in use. Press volume + or volume - to choose Set date/time, then press select. Press volume + or volume - to choose the month, then press select. Press volume + or volume - to choose the day, then press select. Press volume + or volume - to choose the year, then press select. Press volume + or volume - to choose the hour, then press select. Press volume + or volume - to choose the minute, then press select. Press select to confirm your selection. You hear a confirmation tone. 3. 4. 5. 6. 7. 8. Sound alert Sound alert feature works only when the parent unit is in mute. If you turn on the sound alert, the parent unit beeps when the baby unit detects sounds which light up four sound level indicators on the parent unit. When the sound alert of the parent unit is turned displays. The sound alert is preset to Off. on, Press menu when the parent unit is not in use. 1. Press volume + or volume - to choose 2. Sound alert, then press select. Press volume + or volume - to choose On or Off. Press select to confirm your selection. The screen displays Saved and you hear a confirmation tone. 3. 4. 4. 3. Press volume + or volume - to choose On or Off. Press select to confirm your selection. The screen displays Saved and you hear a confirmation tone. NOTES Each time you set the vibration alert to ON, the parent unit vibrates briefly after you press select. We recommend you not to turn on the vibration alert and the lullaby at the same time, as the lullaby will trigger the vibration alert frequently. The vibration alert setting on each parent unit is independent. Projector You can turn on or off the baby unit projector. 1. 2. Press menu when the parent unit is not in use. Press volume + or volume - to choose Project, then press select. Press volume + or volume - to choose On or Off. Press select to confirm your selection. The screen displays Saved and you hear a confirmation tone. 3. 4. LCD language You can select a language (English, French or Spanish) to be used in all screen displays. The language is preset to English. 1. 2. Press menu when the parent unit is not in use. Press volume + or volume - to choose Language, then press select. Press volume + or volume - to choose English, Franais or Espaol. Press select to confirm your selection. The screen displays Saved and you hear a confirmation tone. NOTE The language setting on each parent unit is independent. 3. 4. NOTE The sound alert setting on each parent unit is independent. Vibration alert You can turn on the vibration alert so that the parent unit vibrates when the baby unit detects sounds which light up four sound level indicators on the parent unit. When the vibration alert of the parent unit is turned on, displays. The vibration alert is preset to Off. 1. 2. Press menu when the parent unit is not in use. Press volume + or volume - to choose Vibration alert then press select. Temperature You can change the settings for the temperatures range, alerts, format. Set the temperature range You can set the desired minimum and maximum room temperature of the baby unit. 1. 2. Press menu when the parent unit is not in use. Press volume + or volume - to choose Temperature, then press select. Press select to select Range. Press volume + or volume - to adjust the minimum temperature between 55 F and 59 F (11 C and 20 C), then press select. 3. 4. 6 7 8 9 Open/closed sensor overview Control key panel select While in a menu, press to choose an item, or save a setting. back While in a menu, press to return to the previous screen. volume +
volume -
Press to increase the speaker volume. While in a menu, press to scroll up. Press to decrease the speaker volume. While in a menu, press to scroll down. Battery level indicator Light on when the parent unit is connected to AC power. Light flashes when the parent unit battery is low and needs charging. Light off when the parent unit battery is fully charged, or when not connect to AC power and with no battery installed .
(On/off) Press to power on. Press and hold to power off. talk Press and hold to talk to the baby unit; release to stop talking. While in a menu, press to return to idle screen. 10 Power jack 11 Speaker 12 Belt clip 13 Battery compartment cover 5. 6. Press volume + or volume - to adjust the maximum temperature between 83 F and 86 F (21 C and 30 C), then press select. Press select to confirm your selection. The screen displays Saved and you hear a confirmation tone. Turn on or off the temperature alerts You can turn on or off the alerts which reminds you the current room temperature is beyond of temperature range. 1. 2. Press menu when the parent unit is not in use. Press volume + or volume - to choose Temperature, then press select. Press volume + or volume - to choose Alerts, then press select. Press volume + or volume - to choose On or Off. Press select to confirm your selection. The screen displays Saved and you hear a confirmation tone. 3. 4. 5. 4. 3. Set the temperature format You can set the temperature format to Celsius or Fahrenheit. 1. 2. Press menu when the parent unit is not in use. Press volume + or volume - to choose Temperature, then press select. Press volume + or volume - to choose Format, then press select. Press volume + or volume - to choose Celsius or Fahrenheit. Press select to confirm your selection. The screen displays Saved and you hear a confirmation tone. Sensor settings You can change the settings for each individual sensor paired to the baby unit. 1. 2. Press menu when the parent unit is not in use. Press volume + or volume - to choose Sensor settings, then press select to enter the sensor settings menu. 5. Turn the sensor alert on or off You can turn on or off the sensor alert for each individual sensor. 1. 2. Press menu when the parent unit is not in use. Press volume + or volume - to choose Sensor settings, then press select to enter the sensor settings menu. Press select to select Set alert. Press volume + or volume - to choose the desired sensor, then press select. 3. 4. Press volume + or volume - to choose On or Off. 5. Press select to confirm your selection. The screen displays Saved and you hear a confirmation tone. 1 Magnet unit 2 Sensor unit Sensor unit overview P P P P 1 Latch button Press to open the battery compartment case. 2 Back cover 3 Pair button When the sensor has been deregistered from the baby unit, press and hold to enter the registration mode. 4 LED light Flashes red when the sensor is in the registration mode. 5 Battery compartment case Sensor notification You can choose the type of notification to receive when a sensor is triggered. The preset alert notification is Msg, tone, voice. Definitions of notification types:
Msg - The LCD display messages of alert on the handset and telephone base. Tone - The long alert tone that you will hear prior to the voice announcement and LCD display message. Voice - The voice announcement of the alert, at the handset and telephone base. Alerts type Alert tone Voice annc LCD msg
* Sensor log event Msg, tone, voice Msg &
tone
--
Message
--
--
1. 2. 3. 4. only Press menu when the parent unit is not in use. Press volume + or volume - to choose Notifications, then press select. Press volume + or volume - to choose All alerts off, All alerts on, Msg & tone, or Message only. Press select to confirm the setting. The screen displays Saved and you hear a confirmation tone. Sensor log The sensor log menu appears when there is at least one sensor paired to the baby unit. The sensor log stores a maximum of 50 entries for sensor activities from all sensors. 1. 2. Press menu when the parent unit is not in use. Press volume + or volume - to choose Sensor log, then press select to view the sensor log entries. 3. Rename the sensor You can rename each individual sensor to a customized name. 1. 2. Press menu when the parent unit is not in use. Press volume + or volume - to choose Rename, then press select. Press volume + or volume - to choose the sensor to rename, then press select. Press volume + or volume - to choose the desired sensor, then press select. 4. Press volume + or volume - to choose a name. 5. Press select to confirm the name. The screen displays Saved and you hear a confirmation tone. Test the sensor signal strength You can turn on or off the sensor alert for each individual sensor. 1. 2. Press menu when the parent unit is not in use. Press volume + or volume - to choose Sensor settings, then press select to enter the sensor settings menu. Press volume + or volume - to choose Sensor setup, then press select. The screen displays To test the signal strength between your Baby Unit and sensor, press SELECT. Press select. The screen displays Please trigger your sensor now. Press SELECT to continue. Trigger the sensor (refer to Installation Guide to trigger your sensor), and then press select. 3. 4. 5. If the screen displays No signal. Press SELECT to try again.. Press select, and then return to step 3 to test again. If the screen displays Weak signal. Move your sensor closer to the Baby Unit. Now press SELECT, adjust the sensors location to improve the signal, and then press select. 6. When the screen displays Good signal. Good location for your sensor. Press SELECT to finish., Press select. The testing is complete. Projector and lullaby You can turn on the projector and lullaby on the baby unit. The baby unit projects colorful images to the environment, and plays the lullaby to comfort your baby. When the projector is turned on, displays on the parent unit screen. The baby unit will play lullaby. once to turn on the projector and or Press play lullaby. The interesting and colorful images is projected at the same time. Press again to stop playing the lullaby. The baby unit keeps projecting the colorful images. for a third time to turn off the Press projector. The interesting and colorful images fade out. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The baby unit shall be installed and used such that parts of all persons body are maintained at a distance of approximately 8 in (20 cm) or more. The transmitter and antenna of the parent unit shall be held at least 1 in (2.5 cm) from your face. This Class B digital apparatus complies with Canadian requirement:
CAN ICES-3 (B)/NMB-3(B) Industry Canada This device complies with Industry Canada licence-
exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference, including interference that may cause undesired operation. The term IC: before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications. RF radiation exposure statement The baby unit complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The baby unit should be installed and operated with a minimum distance of 8 in (20 cm) between the baby unit and all persons body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies also with Industry Canada RSS-102 with respect to Canadas Health Code 6 for Exposure of Humans to RF Fields. California Energy Commission battery charging testing mode This baby monitor meets the California Energy Commission (CEC) regulations for energy consumption. Your baby monitor is set up to comply with the energy-conserving standards right out of the box. Follow the instructions to install and charge the battery. The CEC battery charging testing mode is activated while charging. Even if the parent unit is paired to baby units, the CEC battery charging testing mode is activated while it is powered off and charging. NOTES The projector and lullaby will automatically turn off after 15 minutes. We recommend you not to turn on the vibration alert and the lullaby at the same time, as the lullaby will trigger the vibration alert frequently. If the baby unit receives talkback from the parent unit during lullaby playback, the lullaby will be paused. It resumes after the talkback finishes. Talk to the baby unit You can broadcast messages from a parent unit to the baby unit and the other parent unit. If you have two parent units, you can use both of them at the same time to talk to the baby unit. Press and hold talk on the side of the parent unit. The screen displays TALKBACK when the voice connection to the baby unit is made. Speak towards the mic on the parent unit. Your voice is broadcast to the baby unit and the other parent unit. NOTES If the speaker volume of the parent unit is set to VOLUME OFF, it will be reset to the default VOLUME 3 when you press and hold TALK. When a parent unit is talking to the baby unit, it is also broadcast to the other parent unit. However, sounds from the baby unit cannot be transmitted to the parent units at the moment. Find/page the parent unit Use this feature to find misplaced parent units. 1. Press page on the baby unit. All idle parent units ring and display PAGING. To end paging, press any key on the parent unit, or press page on the baby unit. NOTES Paging rings all parent units even if the speaker volume of parent unit is set to VOLUME OFF. The baby unit cannot page any parent unit that is turned off, out of range or talking to the baby unit. 2. For cETL compliance only Mesures de scurit importantes Lorsque vous utilisez votre appareil, vous devriez toujours suivre certaines mesures de prcaution de base afin de rduire les risques dincendie, dlectrocution et de blessures corporelles, dont ceux qui suivent:
1. Observez toutes les instructions et mises en garde inscrites sur lappareil. Linstallation par un adulte est requise. Ce produit a t conu pour tre un dispositif dappoint seulement. Il nest pas le remplacement dune supervision responsable et adquate par un adulte et ne devrait pas tre utilis comme telle. Ce produit nest pas conu pour tre utilis en tant que moniteur mdical. Nutilisez pas cet appareil prs de leau ni de toute autre source dhumidit, par exemple, prs dune baignoire, cuve lessive, vier de cuisine, dans un sous-sol humide ni prs dune piscine, dans un soussol humide ou une douche. MISE EN GARDE: Il peut y avoir un risque dexplosion si vous utilisez le mauvais type de piles pour lunit du parent. Nutilisez que le bloc-piles rechargeable inclus ou le bloc-piles de rechange (BT166342/BT266342). Nincinrez pas les piles. Celles-ci risqueraient dexploser. Jetez les piles uses selon les renseignements suivant le sceau du RBRCMD. Nutilisez que les adaptateurs inclus avec ce produit. Lutilisation dun adaptateur dont la polarit ou la tension serait inadquate risque dendommager srieusement le produit et mettre votre scurit en pril. Adaptateur de lunit du bb: Entre 100-120V CA 150 mA 60 Hz; Sortie : 6 V CC 600 mA. Adaptateur de lunit du parent: Entre 100-120V CA 150 mA 60 Hz; Sortie : 6 V CC 400 mA. Lorsquils sont branchs dans une prise de courant, les adaptateurs secteur ont t conus pour tre orients correctement, soit la verticale ou au plancher. Les broches nont pas t conues pour supporter le poids du bloc dalimentation et le maintenir en place si celuici est branch dans une prise au plafond, sous une table ou dans un meuble. Pour les PRODUITS BRANCHER UNE PRISE DE COURANT, la prise de courant doit tre installe prs du produit, afin dassurer une accessibilit scuritaire la prise de courant. Dbranchez ce produit de la prise de courant avant de procder au nettoyage. Nutilisez pas de nettoyants en arosols. Utilisez un chiffon humide pour le nettoyer. Dbranchez les cordons dalimentation avant de remplacer le bloc-piles. Ne coupez pas les cordons dalimentation pour remplacer les fiches, car ceci peut prsenter un 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. General product care To keep this product working well and looking good, follow these guidelines:
Avoid putting it near heating appliances and devices that generate electrical noise (for example, motors or fluorescent lamps). DO NOT expose it to direct sunlight or moisture. Avoid dropping the product or treating it roughly. Clean with a soft cloth. DO NOT immerse the parent unit and the baby unit in water and do not clean them under the tap. DO NOT use cleaning spray or liquid cleaners. Make sure the baby unit and parent unit are dry before you connect them to the mains again. Storage When you are not going to use the baby monitor for some time, remove the rechargeable battery from the parent unit. Store the parent unit, the baby unit and the adapters in a cool and dry place. Frequently asked questions Below are the questions most frequently asked about the baby monitor. If you cannot find the answer to your question, visit our website at www.vtechphones.com or call 1 (800) 595-9511 for customer service. Why does the baby monitor not respond normally?
Try the following (in the order listed) for common cure:
1. Disconnect the power to the baby unit and the parent units. 2. Remove the batteries in the parent units. Then, install the batteries again. 3. Wait a few minutes before connecting power back to the baby units and the parent unit. 4. Turn on the baby unit and the parent units. 5. Wait for the parent units to synchronize with the baby unit. Allow up to one minute for this to take place. Why doesnt the screen of the parent unit go on when I switch on the unit?
Why doesnt the power on light of the baby unit go on when I switch on the unit?
Why does the baby monitor produce a high-pitched noise?
Perhaps the rechargeable battery of the parent unit is empty and the parent unit is not connected to the mains. Insert the appliance plug into the parent unit and put the adapter in a wall socket. Perhaps the baby unit is not connected to the mains. Connect the baby unit to the mains. The units may be too close to each other. Make sure the parent unit and the baby unit are at least 1 meter/3 feet away from each other. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. danger potentiel. Ne laissez aucun objet reposer ni appuyer sur le cordon dalimentation. Ninstallez pas cet appareil dans un endroit o lon risque dcraser le cordon dalimentation ou de le pitiner. Ne faites fonctionner cet appareil quavec le type dalimentation indiqu sur ltiquette. Si vous ne connaissez pas le type dalimentation que vous possdez votre domicile, consultez votre marchand ou votre compagnie locale dlectricit. Ne surchargez pas les prises de courant murales ni les rallonges lectriques. Ne placez pas cet appareil sur un chariot, meuble, trpied, support de montage ni table chancelants. Les trous et ouvertures du botier, situs larrire de lappareil ou sous celui-ci, servent arer lappareil. Pour lempcher de surchauffer, ne bloquez sous aucun prtexte ces ouvertures et nempchez pas laration adquate de lappareil en le plaant sur un lit, divan, tapis ou toute autre surface similaire. De mme, ne le positionnez pas proximit ni au-dessus dune source de chaleur ou dun calorifre. De plus, ne placez pas lappareil dans un endroit avant de vous assurer quil y ait une bonne circulation dair. Nenfoncez jamais dobjets travers les ouvertures de cet appareil, car ils pourraient entrer en contact avec des points de tension dangereux ou causer des courts-circuits qui peuvent dgnrer en incendies ou en risques dlectrocution. Ne renversez jamais de liquide dans ce produit. Afin de rduire les risques dlectrocution, ne dmontez pas cet appareil, mais apportez-le dans un centre de service autoris. Louverture du botier ou le retrait de toutes pices que contient cet appareil, lexception de laccs autoris certaines portes ou ouvertures, risque de vous exposer des points de tension dangereux ou dautres dangers. Un remontage incorrect peut par la suite prsenter des risques dlectrocution. Vous devriez tester la rception chaque fois que vous mettez lappareil en fonction. Examinez les composantes afin de vrifier si celles-ci ne sont pas endommages. Soyez avis de la perte de la confidentialit lorsque vous utilisez les ondes publiques. Les conversations peuvent tre entendues par dautres moniteurs de bb, des tlphones sans fil, des scanneurs, etc. Les enfants devraient tre superviss afin de vous assurer quils ne jouent pas avec lappareil. Le produit nest pas conu pour tre utilis par des personnes (incluant des enfants) aux capacits physiques, sensorielles ou mentales rduites ou qui manquent dexprience et de connaissances, moins quon leur ait donn suffisamment de supervision ou dinstructions relativement lutilisation de lappareil par une personne responsable de leur scurit. CONSERVEZ CES INSTRUCTIONS Why does the parent unit react too quickly to other sounds?
Why does the parent unit vibrate frequently when the lullaby is turned on?
Why dont I hear a sound/
Why cant I hear my baby cry?
Why does the parent unit beep?
Why cant I establish a connection?
Why is the connection lost every now and then? Why are there sound interruptions?
The display shows BATTERY LOW AT SENSOR X. The sensor does not work at all. The baby unit also detects other sounds than those of your baby. Adjust the sensitivity level to a lower level or adjust the speaker volume on the parent unit. The lullaby will trigger the vibration alert frequently. Avoid using lullaby and vibration alert at the same time. The volume of the parent unit may have set too low. Press volume +
to increase the volume level. You may have set a low sound sensitivity level. See Adjust the sound sensitivity of the baby unit to change the setting. If the parent unit is in mute and the sound alert feature is on, there is sound detected from the baby unit. The baby units may be out of range. Move the parent unit closer to the baby units (but not less than 3 feet). If the parent unit is powered by the provided battery, it may not have enough charge for the parent unit to perform normally. Charge the battery in the parent unit for up to 11 hours. The baby units may be out of range. Move the parent unit closer to the baby units (but not less than 3 feet). Other electronic products may cause interference with your baby monitor. Try installing your baby monitor as far away from these electronic devices as possible. Replace the batteries with new ones. Make sure the batteries are installed. It may be deregistered from the baby unit. 1. Press and hold baby unit for about 4 seconds while idle to entering the registration mode Press and hold the pair button on the sensor to enter the registration mode. on the 2. The handset shows REGISTERED and you hear a beep when the registration process completes. This process takes about 90 seconds to complete. The sensor may be out of range. Move the sensor closer to the baby unit. Mises en garde 1. 2. 3. 4. 5. 6. Utilisez et entreposez le produit une temprature entre 0 C (32F) et 40C (104 F). Nexposez pas cet appareil des froids ou des chaleurs extrmes, ainsi qu la lumire directe du soleil. Ne linstallez pas prs dune source de chauffage. Le bloc-piles ne doit pas tre expos la chaleur excessive telle que la lumire du soleil ou au feu. Assurez-vous que le moniteur et le cordon de ladaptateur sont toujours hors de porte des enfants, au moins 1 mtre (3 pieds) de lenfant ou du berceau, pour viter tout risque de strangulation. Ne jamais placer le moniteur lintrieur du berceau ou du parc de bb. Ne jamais couvrir le moniteur ou lunit (s) portative avec un article tel une serviette ou une couverture. Dautres quipements lectroniques peuvent produire des interfrences sur votre moniteur vido et audio. Tentez dinstaller votre moniteur vido ou audio lcart des appareils lectroniques tels que des routeurs sans fil, radios, tlphones cellulaires, interphones, moniteurs, tlphones, ordinateurs personnels, lectromnagers et tlphones sans fil. Stimulateurs cardiaques implants dans lorganisme Les simulateurs cardiaques (ne sapplique quaux dispositifs numriques sans fil):
Lorganisme Wireless Technology Research, LLC
(WTR), une firme de recherche indpendante, a men une valuation pluridisciplinaire des interfrences entre les tlphones sans fil portatifs et les stimulateurs cardiaques implants dans lorganisme. Appuye par lAdministration des aliments et drogues (FDA) des tats-Unis, la firme WTR recommande aux mdecins:
Avis aux dtenteurs de stimulateurs cardiaques Vous devriez maintenir les dispositifs sans fil au moins six pouces du simulateur cardiaque. Ils ne doivent PAS placer le tlphone sans fil directement sur le stimulateur cardiaque, tel que dans une poche de chemise, lorsque celui-ci est en marche. Ltude effectue par lorganisme WRS na pas identifi de risque pour les dtenteurs de simulateurs cardiaques causs par les gens qui utilisent dispositifs sans fil proximit de ceux-ci. Champs lectromagntiques (EMF) Ce produit de VTech est conforme toutes les normes se rapportant aux champs lectromagntiques
(EMF) standard. Si vous le manipulez correctement en suivant les instructions de ce guide, son utilisation sera scuritaire pendant de nombreuses annes, selon les meilleures vidences scientifiques dont nous disposons aujourdhui. 2. 3. 4. 5. Important safety instructions When using your equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following:
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Follow all warnings and instructions marked on the product. Adult setup is required. This product is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such. This product is not intended for use as a medical monitor. Do not use this product near water. For example, do not use it next to a bath tub, wash bowl, kitchen sink, laundry tub or swimming pool, or in a wet basement or shower. CAUTION: Use only the batteries indicated in this manual. There may be a risk of explosion if a wrong type of battery is used for the parent unit. Use only the supplied rechargeable battery or replacement battery pack (BT166342/BT266342) for the parent unit. Do not dispose of batteries in a fire. They may explode. Dispose of used battery according to the information in The RBRC seal. Use only the adapters included with this product. Incorrect adapter polarity or voltage can seriously damage the product. Baby unit power adapter: Input 100-120V AC 150mA 60Hz; Output: 6V DC 600mA;
Parent unit power adapter: Input 100-120V AC 150mA 60Hz; Output: 6V DC 400mA. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet. For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Unplug the power cords before replacing batteries. Do not cut off the power adapters to replace them with other plugs, as this causes a hazardous situation. Limited warranty What does this limited warranty cover?
The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase (Consumer or you) that the Product and all accessories provided in the sales package (Product) are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the Product operating instructions. This limited warranty extends only to the Consumer for Products purchased and used in the United States of America and Canada. What will VTech do if the Product is not free from defects in materials and workmanship during the limited warranty period (Materially Defective Product)?
During the limited warranty period, VTechs authorized service representative will repair or replace at VTechs option, without charge, a Materially Defective Product. If we repair the Product, we may use new or refurbished replacement parts. If we choose to replace the Product, we may replace it with a new or refurbished Product of the same or similar design. We will retain defective parts, modules, or equipment. Repair or replacement of the Product, at VTechs option, is your exclusive remedy. VTech will return the repaired or replacement Products to you in working condition. You should expect the repair or replacement to take approximately 30 days. How long is the limited warranty period?
The limited warranty period for the Product extends for ONE (1) YEAR from the date of purchase. If VTech repairs or replaces a Materially Defective Product under the terms of this limited warranty, this limited warranty also applies to the repaired or replacement Product for a period of either (a) 90 days from the date the repaired or replacement Product is shipped to you or (b) the time remaining on the original one-year warranty; whichever is longer. What is not covered by this limited warranty?
This limited warranty does not cover:
1. Product that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water or other liquid intrusion; or Product that has been damaged due to repair, alteration or modification by anyone other than an authorized service representative of VTech; or Product to the extent that the problem experienced is caused by signal conditions, network reliability, or cable or antenna systems; or Product to the extent that the problem is caused by use with non-VTech accessories; or Product whose warranty/quality stickers, product serial number plates or electronic serial numbers have been removed, altered or rendered illegible; or The RBRC seal The RBRC seal on the nickel-metal battery indicates that VTech Communications, Inc. is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful lives, when taken out of service within the United States and Canada. The RBRC program provides a convenient alternative to placing used nickel-metal batteries into the trash or municipal waste, which may be illegal in your area. VTechs participation in RBRC makes it easy for you to drop off the spent battery at local retailers participating in the RBRC program or at authorized VTech product service centers. Please call 1 (800) 8 BATTERY for information on Ni-MH battery recycling and disposal bans/restrictions in your area. VTechs involvement in this program is part of its commitment to protecting our environment and conserving natural resources. RBRC and 1 (800) 8 BATTERY are registered trademarks of Rechargeable Battery Recycling Corporation. FCC and IC regulations FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission
(FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 13. 14. 15. 16. 17. 18. 19. Do not allow anything to rest on the power cords. Do not install this product where the cords may be walked on or crimped. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult your dealer or local power company. Do not overload wall outlets or use an extension cord. Do not place this product on an unstable table, shelf, stand or other unstable surfaces. This product should not be placed in any area where proper ventilation is not provided. Slots and openings in the back or bottom of this product are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat register. Never push objects of any kind into this product through the slots because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the product other than specified access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used. 20.You should test the sound reception every time you turn on the units or move one of the components. 21.Periodically examine all components for damage. 22.Be aware of possible loss of privacy while using public airwaves. Conversations may be picked up by other nursery monitors, cordless phones, scanners, etc. 23.Children should be supervised to ensure that they do not play with the product. 24.The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. SAVE THESE INSTRUCTIONS 6. 7. 8. Product purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for commercial or institutional purposes (including but not limited to Products used for rental purposes); or Product returned without a valid proof of purchase
(see item 2 on the next page); or Charges for installation or set up, adjustment of customer controls, and installation or repair of systems outside the unit. How do you get warranty service?
To obtain warranty service in the USA, please visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377. NOTE: Before calling for service, please review the users manual - a check of the Products controls and features may save you a service call. Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the Product(s) to the service location. VTech will return repaired or replaced Product under this limited warranty. Transportation, delivery or handling charges are prepaid. VTech assumes no risk for damage or loss of the Product in transit. If the Product failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, VTech will notify you and will request that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for the repair of Products that are not covered by this limited warranty. What must you return with the Product to get warranty service?
1. Return the entire original package and contents including the Product to the VTech service location along with a description of the malfunction or difficulty; and Include a valid proof of purchase (sales receipt) identifying the Product purchased (Product model) and the date of purchase or receipt; and Provide your name, complete and correct mailing address, and telephone number. 2. 3. Other limitations This warranty is the complete and exclusive agreement between you and VTech. It supersedes all other written or oral communications related to this Product. VTech provides no other warranties for this Product. The warranty exclusively describes all of VTechs responsibilities regarding the Product. There are no other express warranties. No one is authorized to make modifications to this limited warranty and you should not rely on any such modification. State/Provincial Law Rights: This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state or province to province. Cautions 1. 2. 3. 4. 5. 6. Use and store the product at a temperature between 32oF and 104oF. Do not expose the product to extreme cold, heat or direct sunlight. Do not put the product close to a heating source. Batteries should not be exposed to excessive heat such as bright sunshine or fire. Make sure the baby unit(s) and the adapter cord(s) are always out of reach of the baby, at least 3 feet away from the baby or crib, to avoid a possible strangulation hazard. Never place the baby unit(s) inside the babys crib or playpen. Never cover the baby unit(s) or parent unit with anything such as a towel or a blanket. Other electronic products may cause interference with your baby monitor. Try installing your baby monitor as far away from these electronic devices as possible:
wireless routers, radios, cellular telephones, intercoms, room monitors, televisions, personal computers, kitchen appliances and cordless telephones. Precautions for users of implanted cardiac pacemakers Cardiac pacemakers (applies only to digital cordless devices):
Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless devices and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that:
Pacemaker patients Should keep wireless devices at least six inches from the pacemaker. Should NOT place wireless devices directly over the pacemaker, such as in a breast pocket, when it is turned ON. WTRs evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless devices. Electromagnetic fields (EMF) This VTech product complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this users manual, the product is safe to be used based on scientific evidence available today. Limitations: Implied warranties, including those of fitness for a particular purpose and merchantability (an unwritten warranty that the Product is fit for ordinary use) are limited to one year from the date of purchase. Some states/provinces do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event shall VTech be liable for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost profits or revenue, inability to use the Product or other associated equipment, the cost of substitute equipment, and claims by third parties) resulting from the use of this Product. Some states/
provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Please retain your original sales receipt as proof of purchase. Technical specifications Frequency control Transmit frequency Crystal controlled PLL synthesizer Baby unit: 1921.536-1928.448 MHz Parent unit: 1921.536-1928.448 MHz Channels 5 LCD 35 (x) x 21.2 (y) mm B&W LCD Nominal effective range Power requirement Maximum power allowed by FCC and IC. Actual operating range may vary according to environmental conditions at the time of use. Baby unit power adapter:
Input: 100-120V AC 150mA 60Hz Output: 6V DC 600mA Parent unit power adapter:
Input: 100-120V AC 150mA 60Hz Output: 6V DC 400mA Parent unit: 2.4V Ni-MH battery Contact sensor:
2 x AAA batteries Specifications are subject to change without notice. 2015 VTech Communications, Inc. All rights reserved. 07/15. DM271_CIB_V1.0
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2015-12-29 | 1921.536 ~ 1928.448 | PUT - Part 15 Unlicensed PCS portable Tx worn on body | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2015-12-29
|
||||
1 | Applicant's complete, legal business name |
VTech Telecommunications Ltd
|
||||
1 | FCC Registration Number (FRN) |
0015973951
|
||||
1 | Physical Address |
23/F Tai Ping Ind Center Block 1
|
||||
1 |
Tai Po NT, N/A
|
|||||
1 |
Hong Kong
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
T******@intertek.com
|
||||
1 | TCB Scope |
A3: Unlicensed Personal Communication System (PCS) devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
EW7
|
||||
1 | Equipment Product Code |
80-9896-01
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
M******** T****
|
||||
1 | Title |
Approbation Supervisor
|
||||
1 | Telephone Number |
852-2********
|
||||
1 | Fax Number |
852-2********
|
||||
1 |
m******@vtech.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Intertek Testing Services Hong Kong Ltd.
|
||||
1 | Name |
M****** N****
|
||||
1 | Physical Address |
2/F., Garment Centre
|
||||
1 |
Kowloon
|
|||||
1 |
Hong Kong
|
|||||
1 | Telephone Number |
(852)********
|
||||
1 | Fax Number |
(852)********
|
||||
1 |
m******@intertek.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
Intertek Testing Services Hong Kong Ltd.
|
||||
1 | Name |
M******** N****
|
||||
1 | Physical Address |
2/F., Garment Centre
|
||||
1 |
Kowloon
|
|||||
1 |
Hong Kong
|
|||||
1 | Telephone Number |
(852)********
|
||||
1 | Fax Number |
(852)********
|
||||
1 |
m******@intertek.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | PUT - Part 15 Unlicensed PCS portable Tx worn on body | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Digital Audio Baby Monitor - Parent Unit | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | Yes | ||||
1 | Grant Comments | The output power listed is conducted. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This device has been tested for SAR compliance for head and body-worn configurations. SAR compliance for body-worn operating configurations is limited to the specific belt clip tested for this filing. End-users must be informed of the operating requirements for satisfying RF exposure compliance. The highest reported SAR value is < 0.10 W/kg. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Intertek Testing Services Hong Kong Ltd.
|
||||
1 | Name |
J******** H******
|
||||
1 | Telephone Number |
85221********
|
||||
1 | Fax Number |
85278********
|
||||
1 |
j******@intertek.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15D | 1921.53600000 | 1928.44800000 | 0.0830000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC