FCC ID: EW780-S110-00 SIP Phone Corded

Quick Installation Guide D865 VoIP phone A Delivery content Lieferumfang Contenu de la bote En la caja Contenuto della confezione B Attaching the Footstand Fu montieren Attacher le pied Montaje el soporte Fissare il supporto 1 2 3 C Connecting Anschlieen Connecter Conectar Collegare

(1, 2) USB 2.0 type A GNU General Public License Quick Installation Guide D865

(1) If no PoE available

- Wenn PoE nicht ver-

fgbar

- S'il n'y a pas de PoE

- Si no se dispone de PoE

- Se non disponibile PoE

(2) Not included in delivery

- Nicht im Lieferumfang enthalten

- Non inclus

- Non incluido

- Non incluso

(3) Optional - Optionnel -

Opzionale - Opcional USB 2.0, type A

(2, 3)

(2, 3)

(2, 3)

(2, 3) D Accept call

, confirm End call, cancel Snom Technology GmbH Wittestr. 30 G 13509 Berlin, Deutschland office.de@snom.com Snom Technology GmbH Via Milano 1 20020 Lainate, Italia office.it@snom.com Snom Technology GmbH 130, avenue Joseph Kessel 78960 Voisins-le-Bretonneux, France-

office.fr@snom.com Snom Technology GmbH The Courtyard High Street Ascot, Berkshire SL5 7HP, UK office.uk@snom.com VTech Communications Inc. Snom Americas 9020 Washington Square Road, Suite 555 Tigard, OR 97223 Phone support: (339) 227 6160 VTech Technologies Canada Ltd. Suite 222 13888 Wireless Way Richmond, B.C. V6V 0A3, Canada Phone support: (339) 227 6160 Manufacturer:

VTech Telecommunications Ltd. 23/F., Tai Ping Industrial Centre, Block 1, 57 Ting Kok Road, Tai Po HONG KONG v2022001 ENGLISH Copyright, Trademarks, Legal Disclaimers 2021 Snom Technology GmbH. All Rights Reserved. Snom, the names of Snom products, and Snom logos are trademarks owned by Snom Technology GmbH. All product specifications are subject to change without notification. Snom Technology GmbH reserves the right to revise and change this document at any time, without being obliged to announce such revisions or changes beforehand or after the fact. Although due care has been taken in the compilation and presentation of the information in this document, the data upon which it is based may have changed in the meantime. Snom therefore disclaims all warranties and liability for the accurateness, completeness, and currentness of the information published, except in the case of intention or gross negligence on the part of Snom or where liability arises due to binding legal provisions. Important Information Follow the instructions in the manual and other applicable documentation of the device. Save this guide and do not give the device to third parties without it. The nameplate is located at the bottom or rear of the product. Safety Instructions This device is designed for professional use. Warning: The product included (ITE) in this manual is to be connected only to PoE networks without routing to the outside plant. The socket outlet for the power adaptor must be near the equipment and easily accessible. Mount the device only at heights not exceeding 2m. If the phone is not supplied with power via the Ethernet cable, use only the power adapter listed in the user instructions. Other power supplies may damage or destroy the phone, affect its behavior, or induce noise. Avoid placing the cables where people may trip over them or where they may be exposed to mechanical pressure as this may damage them. This device is for indoor use only! NOT FOR OUTDOOR USE!

Do not install the device in rooms with high humidity

(for example, in bathrooms, laundry rooms, damp basements). Do not immerse the device in water and do not spill or pour liquids of any kind onto or into the device. Do not install the device in surroundings at risk for explosions (paint shops, for example). Do not use the device if you smell gas or other potentially explosive fumes. Do not use the device during thunderstorms. Lightning striking the power grid may cause electric shocks. Warning: The handset contains a magnet, and its earpiece may attract small dangerous objects such as needles or pins. Please ensure before each use that no such objects are present. SELV (Safety Extra Low Voltage) Compliance. Safety status of Input/Output connections comply with SELV requirements. Warning: To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and PSTN ports contain TNV circuits. Some LAN and PSTN ports both use RJ-45 (8P8C) connectors. Use caution when connecting cables. Caution: To maintain compliance with radio frequency exposure requirements, the phone shall be installed and used so that parts of users body other than hands keep a distance of 20 cm or more. Standards conformance This device complies with Directive 2014/53/EU and the essential health, safety, and environ-

mental requirements of all relevant European directives. This device complies with the Radio Equipment Regulations 2017 and the essential health, safety, and environmental standards of the UK. This device is FCC certified and meets US health, safety, and environmental standards. FCC ID: EW780-S110-00 This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. IC ID: 1135B-80S11000 You can download the declaration of conformity at www. snom.com/conformity. Unauthorized opening, changing, or modifying the device will cause the warranty to lapse and may also result in the loss of CE and IC conformity and the FCC certification. In case of malfunction contact authorized service personnel, your seller, or Snom. FCC part 15 This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at the users expense. WARNING: Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Privacy of communications may not be ensured when using this telephone. RF Radiation Exposure This VoIP Phone complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. Caution: To maintain compliance with the radio frequency exposure requirement, the phone shall be installed and used so that parts of users body other than hands keep a distance of 20 cm or more. Consumer Information a. b. c. d. e. f. g. h. i. This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company. An applicable certification jacks Universal Service Order Codes (USOC) for the equipment is provided (i.e., RJ45C) in the packaging with each piece of approved terminal equipment. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant LAN cable (RJ45) and modular plug is provided with this product. An RJ45 jack should normally be used for connecting to the SIP equipment through the LAN cable. See installation instructions for details. If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isnt practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service. Should you experience trouble with this equipment, please contact Snom Technology GmbH 1 (339) 227-6160 (select option 2) for repair or warranty information. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. Please follow instructions for repairing if any

(e.g. battery replacement section); otherwise do not alternate or repair any parts of device except specified. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information. NOTICE: If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this D785 does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. j. This equipment is hearing aid compatible. NOTICE: According to telephone company reports, AC electrical surges, typically resulting from lightning strikes, are very destructive to telephone equipment connected to AC power sources. To minimize damage from these types of surges, a surge arrestor is recommended. Industry Canada This Class A digital apparatus complies with Canadian requirements: CAN ICES-3 (A)/NMB-3(A). This device complies with Industry Canada licence-

exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Privacy of communications may not be ensured when using this telephone. The term IC: before the certification/registration number only signifies that the Industry Canada technical speci-

fications were met. This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. RF Radiation Exposure This VoIP phone also complies with Industry Canada RSS-102 with respect to Health Canadas Safety Code 6 for human exposure to radiofrequency electromagnetic energy. To maintain compliance with the radio frequency exposure requirement, the phone shall be installed and used so that parts of users body other than hands keep a distance of 20 cm or more. Safety: IEC 62368-1 Bluetooth Radio frequency band: 24022480 MHz (US, EMEA) Max. transmission power: 7.08mW (US), 6.31mW

(EMEA) Wireless LAN (WLAN, WiFi): 802.11b/g/n/a/ac Radio frequency (RF) bands:

EMEA: 24122472 MHz, 51505850 MHz US: 24122462 MHz, 51505850 MHz Max. transmission power:

2.4G Wi-Fi: 63.10mW (US), 79.43mW (EMEA) 5G Wi-Fi B1: 63.10mW (US), 199.53mW (EMEA) 5G Wi-Fi B2: 63.10mW (US), 199.53mW (EMEA) 5G Wi-Fi B3: 100mW (US), 100mW (EMEA) 5G Wi-Fi B4: 100mW (US), 25.12mW (EMEA) Connectors:

2 x RJ45 (Ethernet): 1 x LAN, 1 x PC 2 x 4P4C (handset, optional headset) 1 x RJ12 (for EHS) 2 x USB 2.0 ports, type A 1 x coaxial power connector Ethernet: 2 x IEEE 802.3 / 1 Gigabit Ethernet switch Power over Ethernet (PoE): IEEE 802.3af, Class 3 If PoE not available: Power adapter not included in delivery, available separately:

00004570 00004571 Mass Power, model NBS12E050200UV, Snom PN Rongweixin, model R122-0502000ID, Snom PN Snom A6, Phihong model PSM10R-050, Snom PN 00004326 (US) Disposal of the device This device is subject to European Directive 2012/19/EU and may not be disposed of with general household garbage. If you do not know where to dispose the device at the end of its lifespan, contact your municipality, local waste manage-

ment provider, or vendor. For countries outside the European Union Disposal of electrical and electronic products in countries outside the European Union should be done in line with lo-

cal regulations. Please contact local authorities for further information. Cleaning To clean the device, use an anti-static cloth. Please avoid cleaning liquids as they might damage the surface or inter-

nal electronics of the device. Setting up and connecting the phone: See figures B and C. Initializing and registering the phone NOTE: You will need the registration information received from your Internet service provider or your network administrator - normally the phone or extensi-

on number, the password, and the registrar. After you have set up the phone and connected it to the network, it will begin to initialize. Normally the initializati-

on is completely automatic, using DHCP. If your network does not support DHCP, you must obtain the IP address, netmask, IP gateway, and DNS server from your Internet service provider or your network administ-

rator and enter them manually when you are asked to do so on the display. Watch the display and, when prompted, select an option by pressing the up key (Fig. D). Save your selection by pressing the OK key arrow on the navigation

. or down 1. Language. The default is English. 2. Time zone. Press the function key underneath to go to the next time zone, then available options within that time zone. to show all 3. Tone scheme (dial tone) 4. The display shows the "Welcome" screen. Press any key to log on. 5. Enter the account number. Press 6. Enter the registrar. Press 7. Reboot the phone. 8. to save. to save. Enter the password received from your Internet ser-

vice provider or administrator. Press successful registration the idle screen appears, to save. After For further information, please see our web page https://service.snom.com. DEUTSCH Copyright, Markenrechte, Haftungsausschluss 2021 Snom Technology Aktiengesellschaft. Alle Rechte reserviert. Snom sowie die Namen der Snom-Produkte und die Snom-Logos sind gesetzlich geschtzte Marken der Snom Technology GmbH. Produktspezifikationen knnen ohne Vorankndigung gendert werden. Snom Technology GmbH behlt sich je-

derzeit das Recht auf berarbeitung und nderung dieses Dokumentes vor, ohne verpflichtet zu sein, die vorgenom-

menen nderungen anzukndigen oder mitzuteilen. Trotz der angewandten Sorgfalt bei der Zusammenstel-

lung und Prsentation der Informationen in diesem Doku-

ment knnen sich Daten zwischenzeitlich gendert haben. Daher bernimmt Snom keine Gewhr fr die Richtig-

keit, Vollstndigkeit oder Aktualitt der zur Verfgung gestellten Informationen. Jegliche Haftung fr Schden ist ausgeschlossen, sofern diese nicht auf Vorsatz oder grober Fahrlssigkeit auf seiten von Snom beruhen oder sofern keine Haftung aufgrund zwingender gesetzlicher Bestimmungen eintritt. Wichtige Hinweise Lesen Sie bitte vor Inbetriebnahme die Sicherheitshinwei-

se und die Bedienungsanleitung. Lassen Sie sie auch von den Mitbenutzern des Gertes Bewahren Sie dieses Doku-

ment auf und geben Sie das Telefon nur mit ihm an Dritte weiter. Das Typenschild befindet sich unten oder hinten am Gert. Sicherheit Befolgen Sie die Anweisungen in dieser Bedienungsanlei-

tung und in der sonstigen Dokumentation des Gerts. Dieses Gert ist fr die berufliche Nutzung bestimmt. Warnung: Das in diesem Handbuch enthaltene Produkt (ITE) darf nur an PoE-Netzwerke ohne Routing zur Auenanlage angeschlossen werden. Die Steckdose fr das Netzteil muss sich in der Nhe des Gerts befinden und leicht zugnglich sein. Montieren Sie das Gert nur in Hhen von hchstens 2 m. Falls die Stromversorgung nicht ber ein Ethernetkabel erfolgt, verwenden Sie nur ein von Snom ausdrcklich empfohlenes Netzteil. Die Verwendung anderer Netztei-

le knnte das Telefon beschdigen oder gar zerstren. Verlegen Sie die Netz- und Stromkabel so, dass sie durch mechanischen Druck nicht beschdigt werden und Personen nicht darber stolpern knnten. Dieses Gert ist nur fr den Gebrauch in Innenrumen bestimmt - NICHT FR DEN AUSSENBEREICH!

Stellen Sie das Gert nicht in Rumen mit hoher Luft-

feuchtigkeit wie Badezimmern, Waschkchen, feuchten Kellerrumen auf. Tauchen Sie das Gert nicht in Wasser und gieen Sie keine Flssigkeiten auf oder in das Gert. Stellen Sie das Gert nicht in explosionsgefhrdeten Umgebungen (z.B. Lackiereien) auf. Benutzen Sie das Gert nicht, wenn Sie Gas oder andere mglicherweise explosionsgefhrliche Dmpfe riechen. Telefonieren Sie nicht whrend eines Gewitters (Strom-

schlaggefahr bei Blitzeinschlag ins Netz). Warnung: Der Hrer enthlt einen Magneten und kann kleine gefhrliche Objekte wie Nadeln anziehen. Bevor Sie ihn ans Ohr halten, vergewissern Sie sich, dass keine Objekte daran haften. SELV (Safety Extra Low Voltage) Einhaltung. Die Eingangs-/Ausgangsverbindungen halten die SELV-

Richtlinien fr Kleinspannungsgerte ein. Warnung:

Nur an LAN-Ports anschlieen! Um elektrische Schlge zu vermeiden, verbinden Sie keine SELV-Gerte mit Gerten, die Telefon-Netzspannung (TNV) fhren. LAN-

Ports enthalten SELV-Stromkreise, Festnetz-Anschlsse dagegen TNV-Stromkreise; beide knnten jedoch Steck-

verbindungen RJ-45 (8P8C) verwenden. Vorsicht: Um die Einhaltung der Richtlinie fr Hochfrequenz-Exposition zu gewhrleisten, muss das Telefon so installiert und benutzt werden, dass andere Krperteile des Benutzers als die Hnde einen Abstand von mindestens 20 cm zu dem Gert einhalten. Normkonformitt Dieses Gert entspricht der Richtlinie 2014/53/

EU und den grundlegenden Gesundheits-, Sicherheits- und Umweltanforderungen aller relevanten europischen Richtlinien. Die Konformittser-

klrung knnen Sie auf https://www.snom.com/conformity herunterladen. Die eigenmchtige ffnung des Gerts sowie nderungen und Modifizierungen am Gert fhren zum Erlschen der Herstellergarantie und knnen darberhinaus zum Erl-

schen der Zulassungen fhren. Sicherheit: IEC 62368-1 Bluetooth Frequenzband: 2402 MHz - 2480 MHz Maximale Sendeleistung: 6,31 mW WLAN: 802.11b/g/n/a/ac Frequenzbnder: 24122472 MHz, 51505850 MHz Maximale Sendeleistung:

2,4G Wi-Fi: 79,43mW

(Bitte Blatt umdrehen, weiter auf der Rckseite) 5G Wi-Fi B1: 199,53mW 5G Wi-Fi B2: 199,53mW 5G Wi-Fi B3: 100mW 5G Wi-Fi B4: 25,12mW Anschlsse:

2 x RJ45 (Ethernet): 1 x LAN, 1 x PC 2 x 4P4C (Hrer, optionales schnurgeb. Headset) 1 x RJ12 USB-Port: 2 x Typ A, USB 2.0 1 x koaxialer Stromanschluss Ethernet: 2 x IEEE 802.3 / 1 Gigabit Ethernet-Switch Power over Ethernet (PoE): IEEE 802.3af, Klasse 3 Wenn PoE nicht verfgbar ist, verwenden Sie eines der separat erhltlichen Netzteile:

Mass Power, Modell NBS12E050200UV, Snom Art.-Nr. Rongweixin, Modell R122-0502000ID, Snom Art.-Nr. 00004570 00004571 Entsorgung Dieses Gert unterliegt der europischen Richtlinie 2012/19/EU und darf nicht im Hausmll entsorgt werden. Wenn Sie nicht wissen, wo Sie Ihr Altgert entsorgen knnen, wenden Sie sich bitte an Ihre Kommune, Ihren rtlichen Mllentsorger oder Ihren Fach-

hndler. Reinigung Benutzen Sie ein antistatisches Tuch. Benutzen Sie kein Wasser und keine Reinigungsflssigkeiten, da sie die Oberflche und die Elektronik des Gertes beschdigen knnten. Aufstellen und Anschlieen des Telefons Siehe Abb. B und C. Initialisierung und Registrierung des Telefons Beachten Sie bitte: Sie bentigen die von Ihrem Netz-

werkadministrator oder Ihrem VoIP-Provider erhalte-

nen Zugangsdaten fr die Registrierung und Nutzung Ihres Accounts (Kontos), normalerweise Telefonnum-

mer, Registrar und Passwort. Sobald Sie das Telefon an das Netzwerk angeschlossen haben, beginnt es mit der Initialisierung und Registrie-

rung. Die Initialisierung erfolgt normalerweise automa-

tisch ber DHCP. Falls Ihr Netzwork DHCP nicht untersttzt, knnen Sie die IP-Addresse, den IP-Gateway und den DNS Server, die Sie ebenfalls von Ihrem Netzwerkadministrator oder VoIP-

Provider erhalten, manuell eingeben, wenn Sie auf dem Display dazu aufgefordert werden. Treffen Sie bei Aufforderung auf dem Display Ihre Aus-

wahl durch Drcken des Aufwrts- oder Abwrtspfeils auf der Navigationstaste (Abb. D). Speichern Sie Ihre Auswahl durch Drcken der OK-Taste

. Sprache. Die Voreinstellung ab Werk ist Englisch. 1. 2. Zeitzone 3. Rufton 4. Auf dem nchsten Bildschirm werden Sie aufgefordert, eine beliebige Taste zu drcken, um die Registrierung des Telefons vorzunehmen. 5. 6. Geben Sie die Account-/Nebenstellennummer ein und besttigen Sie die Eingabe mit Geben Sie den Registrar ein und besttigen Sie die Eingabe mit

. 7. Starten Sie das Telefon neu. 8. Geben Sie das Passwort ein, das Sie von Ihrem Internet Provider oder Ihrem Netzwerkadministrator erhalten haben, und drcken Sie auf erfolgreicher Registrierung sehen Sie den Ruhebild-

schirm. Nach Weitere Information finden Sie auf unserer Webseite https://service.snom.com. FRANAIS Copyright, Marques Dposes, Non Respon-

sabilite 2021 Snom Technology GmbH. Tous droits rservs. Snom, les noms des produits et les logos Snom sont des marques dposes par Snom Technology GmbH. Toutes les spcifications du produit sont sujet modifica-

tions sans pravis. Snom Technology GmbH se rserve le droit de modifier et de changer ce document nimporte quel moment, sans devoir annoncer de telles modifications ou changements avant ou aprs leur mise en place. Bien que le plus grand soin ait t apport la compilation et la prsentation des informations contenues dans ce document, les donnes sur lesquelles elles sont bases peuvent entre-temps avoir t modifies. Snom doit donc dcliner toute garantie et toute responsabilit quand lexactitude et lexhaustivit des informations publies except en cas de ngligence flagrante de la part de Snom ainsi que des les cas ou la responsabilit de Snom est engage de par la loi. Informations importantes Veuillez lire les informations concernant la scurit et la mise au rebut de lappareil ainsi que celles con-

cernant son installation et son utilisation avant dutiliser buanmderlappareil. Gardez ce manuel et ne cdez pas lappareil une tierce partie sans le manuel. La plaque signaltique est situe en bas ou larrire du produit. Scurit Suivez les instructions prsentes dans ce manuel et dans les autres documents concernant lappareil. Cet appareil est destin une utilisation professionnelle. Avertissement : Le produit inclus (ITE) dans ce manuel doit tre connect uniquement aux rseaux PoE sans routage vers l'installation extrieure. La boite de sortie pour le bloc dalimentation doit tre proximit de lquipement et facilement accessible. Montez lappareil uniquement des hauteurs ne dpas-

sant pas 2m. Evitez de placer les cbles de lappareil dans un endroit ou il est possible de trbucher dessus. Evitez gale-

ment de les placer l ou ils pourraient tre expos un crasement car ils pourraient en tre endommag. Si les cbles ou la fiche sont endommags, dbranchez lappareil et contactez du personnel dentretien qualifi. Cet appareil est destin une utilisation en intrieur uniquement! Ne linstallez pas au dehors!

Ninstallez pas lappareil dans des pices trs humides

(par exemple, dans une salle de bain ou un sous-sol hu-

mide). Nimmergez pas lappareil dans leau et ne versez pas de liquides daucune sorte sur ou dans lappareil. Ninstallez pas lappareil dans un lieu prsentant un risque dexplosion (un magasin de peinture par exemp-

le). Nutilisez pas lappareil si vous sentez une odeur de gaz ou dautres manations potentiellement explosives. Nutilisez pas lappareil durant les orages, le choc dun clair sur les circuits lectriques peut provoquer une lectrocution. Avertissement: Le combin contient un aimant, et son couteur pourrait attirer de petits objets dangereux tels que des aiguilles ou des pingles. Assurez-vous avant chaque utilisation que de tels objets ne sont prsents Conforme SELV (Safety Extra Low Voltage) - TBTS

(Trs Basse Tension de Scurit). Le niveau de scurit des connexions dentr/sortie est conforme aux recom-

mandations SELV/TBTS. Avertissement: Pour viter les lectrocutions, ne connectez pas les circuits de SELV /

TBTS aux circuits sous tension du rseau tlphonique

(TNV). Ne connectez le cble NET/Ethernet qu un port LAN!

Attention : Afin de maintenir la conformit avec la directive sur lexposition aux radiofrquences, le tlphone doit tre install et utilis de manire ce que les parties du corps de lutilisateur autres que les mains gardent une distance dau moins 20 cm par rapport lappareil. Conformit au standards Cet appareil est marqu CE et conforme la Directive 2014/53/EU et aux standards de scurit, de sant et environnementaux de tous les directives europennes applicables. La dclaration de conformit peut tre tlecharge de https://www.snom. com/conformity. Industrie Canada Le prsent appareil est conforme aux CNR dIndustrie Ca-

nada applicables aux appareils radio exempts de licence. IC ID: 1135B-80S11000 Cet appareil numrique de la classe A est conforme la norme NMB-003(A) du Canada. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes: (1) lappareil ne doit pas produire de brouillage;

(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. La confidentialit de vos conversations nest pas garantie avec cet appareil. Le terme IC avant le numro dhomologation ne signifie seulement que les normes dIndustrie Canada ont t respectes. Le prsent produit est conforme aux sp-

cifications techniques applicables dInnovation, Sciences et Dveloppement conomique Canada. Exposition aux Radiofrquences lectromagntiques Cet appareil est conforme la norme CNR-102 dIndustrie Canada en ce qui concerne le Code de Scurit 6 de Sant Canada sur lexposition humaine aux champs de radiofr-

quences lectromagntiques. Attention: Afin de maintenir la conformit avec la directive sur lexposition aux radiofrquences, le tlphone doit tre install et utilis de manire ce que les parties du corps de lutilisateur autres que les mains gardent une distance dau moins 20 cm par rapport lappareil. L'ouverture et la modification de l'appareil sans autori-

sation annule la garantie et peut galement annuler la conformit CE et la certification IC. En cas de mauvais fon-

ctionnement, veuillez contacter le personnel d'entretien agre, votre revendeur ou bien sSnom. Scurit: IEC 62368-1 Bluetooth Bande de frquence radio (RF): 24022480 MHz (US, EMEA) Puissance de transmission maximale: 7,08mW (US), 6,31mW (EMEA) Rseau local (LAN) sans fil (WLAN, WiFi):

802.11b/g/n/a/ac Bande de frquence radio (RF):

EMEA: 24122472 MHz, 51505850 MHz US: 24122462 MHz, 51505850 MHz Puissance de transmission maximale:

2.4G Wi-Fi: 63,10mW (US), 79,43mW (EMEA) 5G Wi-Fi B1: 63,10mW (US), 199,53mW (EMEA) 5G Wi-Fi B2: 63,10mW (US), 199,53mW (EMEA) 5G Wi-Fi B3: 100mW (US), 100mW (EMEA) 5G Wi-Fi B4: 100mW (US), 25,12mW (EMEA) Connecteurs:

2 x RJ45 (Ethernet): 1 x LAN, 1 x PC 2 x 4P4C (combin, casque filaire (pas inclus)) 1 x RJ12 USB: 2 x type A, USB 2.0 1 x connecteur d'alimentation coaxial Ethernet: 2 x IEEE 802.3 / 1 Gigabit Ethernet switch Power over Ethernet (PoE): IEEE 802.3af, Classe 3 S'il n*ya pas de PoE, utilisez un bloc dalimentation (pas inclu dans la bote, vendu sparment):

Mass Power, modle NBS12E050200UV, no art. Snom Rongweixin, modle R122-0502000ID, no art. Snom 00004570 00004571 Mise au Rbut Cet appareil est soumis la Directive 2012/19/

CE et ne peut tre mis au rebut avec les dchets mnagers normaux. Si vous ne savez pas ou mettre au rebut o faire re-

cycler l'appareil lorsqu'il arrive au terme de son existence, contactez votre municipalit, la socit locale en charge de la gestion des dchets ou votre vendeur. Nettoyage Utilisez un tissu antistatique. Nutilisez pas de leau ou un produit de nettoyage liquide ou solide. Ils peuvent endom-

mager llctronique ou les sufaces de lappareil. Installer et connecter le telephone Voir les figure B et C au verso. Initialisation et enregistrement Renseignement: Vous devez galement disposer des donnes pour la registration et lutilisation de votre compte que vous avez reu de votre administrateur rseau ou de votre fournisseur de VoIP, normalement la numro de tlphone, le mot de passe et le rgistraire. Une fois que lappareil est connect au rseau, il com-

mence sinitialiser et se registrer. Linitialisation est normalement fait automatiquement via DHCP. Si votre rseau ne supporte pas le protocole DHCP, vous devez galement saisir ladresse IP, la passerelle IP et le serveur DNS manuellement. Demandez-les de votre administrateur rseau ou de votre fournisseur de VoIP et suivez les instruction qui saffichent lecran. Aprs linitialisation, le tlphone va vous conduire tra-

vers les paramtres de base. Slectionnez une option avec ou sur la touche de navigation (fig. D) et appuyez sur la touche OK pour sauvegarder votre slection. Langue. Le paramtre par dfaut est l'Anglais. 1. 2. Fuseau horaire 3. Tonalit 4. 5. Vous voyez lcran Bienvenue. Appuyez sur une tou-

che alphanumrique quelconque pour vous loguer. Saisissez votre numro de poste ou votre compte et appuyez sur Saisissez votre registraire et appuyez sur

. 6. 7. Redmarrez le tlphone. 8. Saisissez le mot de passe que vous avez recu de votre fournisseur de VoIP ou votre administrateur et appuyez sur

. Si lenregistrement a russi lcran dattente saffiche. Pour plus des informations consultez notre site web https://service.snom.com. ITALIANO Copyright, Marchi registrati, Declinazione di responsabilita 2021 Snom Technology Aktiengesellschaft. Tutti i diritti riservati. Snom, i nomi dei prodotti snom, ed i loghi Snom sono mar-

chi registrati di propriet di Snom Technology GmbH. Snom Technology GmbH si riserva il diritto di rivedere e modificare il presente documento in qualsiasi momento senza alcun obbligo di notifica precedente o posteriore a tali cambiamenti. Sebbene sia stata prestata la massima attenzione nella stesura e presentazione delle informazioni in questo docu-

mento, i dati su cui si basa potrebbero gi aver subito varia-

zioni. Snom pertanto declina ogni responsabilit riguardo a tutte le garanzie di affidabilit, accuratezza, completezza ed attualit delle informazioni pubblicate, tranne nel caso di grossolana negligenza da parte di Snom o laddove per legge possa essere ritenuta responsabile. Informazioni importanti Pregasi leggere con attenzione le istruzioni inerenti la sicu-

rezza, lo smaltimento e linstallazione del dispositivo prima del suo impiego. altres necessario conservare questo manuale, consegnandolo insieme al dispositivo qualora esso venga dato a terzi. La targhetta si trova nella parte inferiore o posteriore del prodotto. Sicurezza Seguite le istruzioni in questo manuale e tutta la documen-

tazione relativa al dispositivo. Questo dispositivo destinato alluso professionale. Avvertenza: Il prodotto incluso (ITE) in questo manuale da collegare solo a reti PoE senza instradamento verso l'impianto esterno. La presa di corrente per lalimentatore deve essere vicina allapparecchiatura e facilmente accessibile. Montare il dispositivo solo ad altezze non superiori a 2 m. Non posizionare i cavi del telefono dove pu essere calpes-

tato. Non posizionare i cavi del telefono dove pu essere sog-

getto a pressione meccanica perch potrebbe danneggiare i cavi. Se i cavi o la spina si danneggiano, scollegare il telefono e contattare il personale di assistenza qualificato. Il dispositivo si pu impiegare solo al chiuso! Non ins-

tallare allaperto!

Non installare il dispositivo in ambienti con alta umidit (ad es., in bagno, lavanderia, seminterrati umidi). Non immerge-

re il dispositivo in acqua e non versarvi liquidi sopra. Non installare il dispositivo nei pressi di locali a rischio esplosione (colorifici, ad es.). Non utilizzare il dispositivo se sentite odore di gas o di altra esalazione potenzial-

mente esplosiva. Non utilizzare il dispositivo durante i temporali. Qualora un fulmine colpisca la rete elettrica, passibile di scossa. Attenzione: La cornetta contiene un magnete che pot-

rebbe attirare oggetti pericolosi tra cui eventualmente chiodi. Prima di portarla allorecchio assicuratevi che nessun oggetto vi sia attaccato. Conforme al circuito SELV (bassissima tensione di sicurezza). Il nivello di scurezza dei circuiti in ingresso

/ uscita conforme alle raccomandazioni SELV. At-

tenzione: Per evitare scosse elettriche non collegare i circuiti SELV a quelli della rete telefonica (TNV). Le porte LAN hanno circuiti SELV, le porte PSTN hanno circuiti TNV. Attenzione: Per mantenere la conformit alla linea guida per lesposizione alle radiofrequenze, il telefono deve essere installato e utilizzato in modo che parti del corpo dellutente diverse dalle mani mantengano una distanza di almeno 20 cm dal dispositivo. Conformit Il dispositivo dotato di marcatura CE e risponde alla Direttiva 2014/53/EU e agli standard europei di salute, sicurezza ed ambientali. La dichiarazio-

ne di conformit pu essere scaricata allindirizzo https://

www.snom.com/conformity. Eventuali modifiche, cambiamenti e lapertura non auto-

rizzata del dispositivo invalidano la garanzia e potrebbero annullare la marcatura CE. In caso di malfunzionamenti, contattare il servizio di assistenza autorizzato, il rivendito-

re oppure Snom. Sicurezza: IEC 62368-1 Bluetooth Banda di radiofrequenza (RF): 24022480 MHz Potenza di trasmissione massima: 6,31mW Rete locale (LAN) senza fili (WLAN, WiFi):

802.11b/g/n/a/ac Banda di radiofrequenza (RF): 24122472 MHz, 51505850 MHz Potenza di trasmissione massima:

2,4G Wi-Fi: 79,43mW 5G Wi-Fi B1: 199,53mW 5G Wi-Fi B2: 199,53mW 5G Wi-Fi B3: 100mW 5G Wi-Fi B4: 25,12mW Connettore:

2 x RJ45 (Ethernet): 1 x LAN, 1 x PC 2 x 4P4C (cornetta, cuffie con filo (non incluso)) 1 x RJ12 USB: 2 x tipo A, USB 2.0 1 x connettore di alimentazione coassiale Ethernet: 2 x IEEE 802.3 / 1 Gigabit Ethernet switch Power over Ethernet (PoE): IEEE 802.3af, Classe 3 Se PoE non disponibile, utilizzare un alimentatore

(non incluso, venduti separamente):

Mass Power, modello NBS12E050200UV, art. n. Snom Rongweixin, modello R122-0502000ID, art. n. Snom 00004570 00004571 Smaltimento Questo dispositivo soggetto alla Direttiva Eu-

ropea 2012/19/EC e non pu essere smaltito con i rifiuti domestici. Se non sapete come smaltire lapparecchio una volta inutilizzabile, contattate il comune, la nettezza urbana locale, o il vostro rivenditore. Pulizia Utilizzare un panno antistatico. Evitare acqua e altri liquidi o detergenti solidi che potrebbero danneggiare la superfi-

cie o lelettronica interna. Installare e collegare il telefono Vedi fig. B e C. Inizializzazione e registrazione Nota: Sono necessarie le informazioni di registrazione ricevute dal provider o amministratore del sistema generalmente il numero di telefono o numero interno, la password e il Registrar. Una volta impostato il telefono e averlo collegato alla rete, il telefono avvia la procedura di inizializzazione. Di norma la procedura di inizializzazione si svolge in maniera com-

pletamente automatica, mediante protocollo DHCP. Se la rete non supporta il protocollo DHCP, necessario ottenere indirizzo IP, maschera di rete, gateway IP e server DNS dal fornitore di servizi internet o amministratore di rete, quindi inserirli manualmente quando viene richiesto sullo schermo. Selezionare unopzione: Premere il tasto navigazione con

. Salvare ogni selezione: Premere il tasto OK o Lingua. L'impostazione predifinite linglese. 1. 2. Fuso orario 3. Segnale di linea libera 4. 5. 6. 7. Riavviare il telefono. 8. Schermo Benvenuto: Premere un tasto qualsiasi per continuare la registrazione. Digitare il tuo numero di conto/telefono + premere Inserire i dati del Registrar et premere

. Digitare la password. Se la registrazione riuscita, il display visualizza la schermata inattivo. Per ulteriori informazioni consultare nostra pagina web https://service.snom.com. ESPAOL Propriedad intelectual, marcas registradas, exen-

cion de responsabilidad 2021 Snom Technology Aktiengesellschaft: Todos los derechos reservados. Snom, los nombres de los productos snom, y los logos de Snom son marcas comerciales propiedad de Snom Tech-

nology GmbH. Snom Technology GmbH se reserva el derecho de revisar y modificar este documento en cualquier momento, sin ob-

ligacin de notificar estas revisiones o modificaciones por adelantado o con posterioridad a su realizacin. Aunque se han tomado todas las precauciones posibles en la compilacin y presentacin de la informacin de este documento, los datos en los que se basa pueden haber cambiado con el tiempo. snom, por lo tanto, renuncia a cu-

alquier garanta y responsabilidad respecto a la precisin, exhaustividad y vigencia actual de la informacin publica-

da, excepto en el caso de intencionalidad o negligencia gra-

ve por parte de Snom cuando se deriven responsabilidades de acuerdo con las disposiciones legales vinculantes. Informacin importante Lea las instrucciones sobre seguridad telefnica y reciclaje del telfno, y sobre cmo configurar y utilizar el telfono antes de usarlo. Conserve este manual y no entregue el te-

lfono a terceros sin el mismo. La placa de identificacin se encuentra en la parte inferior o posterior del producto. Seguridad Siga las instrucciones de este manual y otra documentaci-

n aplicable del dispositivo. Este dispositivo est diseado para uso profesional. Advertencia: El producto incluido (ITE) en este manual debe conectarse solo a redes PoE sin enrutamiento a la planta exterior. La toma de corriente para el fuente de alimentacin debe estar cerca del equipo y ser de fcil acceso. Montare il dispositivo solo ad altezze non superiori a 2m. Evite poner el cable de alimentacin del telfono de modo que otras personas puedan tropezar con el mis-

mo. No coloque el cable de alimentacin del telfono de forma que pueda verse sometido a presiones mec-

nicas, ya que eso podria daar el cable. Si el cable de alimentacin o el enchufe estn daados, desconecte el telfono y contacte con personal de servicio cualificado. Este dispositivo es solamente para uso en interiores. No debe instalarse en el exterior. No instale el telfono en lugares con humedad elevada

(por ejemplo, en baos, lavaderos, o stanos hmedos). No sumerja el telfono en agua ni derrame o vierta lquidos de ningn tipo sobre el telfono. No instale el telfono cerca de lugares con riesgo de explo-

sin (talleres de pintura, por ejemplo). No use el telfono si huele a gas o a otros vapores que puedan ser explosivos. No use el telfono durante una tormenta; los rayos que impacten en la red elctrica pueden provocar descar-

gas elctricas. Atencin: El auricular contiene un imn y puede atraer pequeos objetos peligrosos, como agujas o alfileres. Antes de utilizarlo, asegrese de que no se ha adherido ningn objeto. Cumplimiento de los requisitor SELV (Tensin Extra-

Baja de Seguridad). Las condiciones de seguridad de las conexiones de entrada/salida cumplen con los requisitos SELV. Atencin: Para evitar descargas elctricas, no conecte circuitos de tensin extra baja

(SELV) a circuitos de tensin de red telefnica (TNV). Los puertos LAN contienen circuitos SELV, los pouertos PSTN contienen circuitos TNV. Algunos puertos LAN y PSTN utilizan conectores RJ-45 (8P8C). Precaucin: Para mantener el cumplimiento de las directrices de exposicin a radiofrecuencias, el telfono deber instalarse y utilizarse de manera que las partes del cuerpo del usuario que no sean las manos guarden una distancia mnima de 20 cm con el dispositivo. Cumplimiento con la normativa Este dispositivo tiene el marcado CE y cumple con la Directiva 2014/53/EU y los estndares de salud, seguridad y medioambientales europeos. La declaracin de conformidad se puede descargar en https://www.snom.com/conformity. Todas las modificaciones, los cambios y la apertura no auto-

rizada del dispositivo provocarn la cancelacin de la garan-

tia, y tambin pueden causar la perdida del marcado CE. Seguridad: IEC 62368-1 Bluetooth Banda de radiofrecuencia (RF): 24022480 MHz Potencia mxima de transmisin: 7,08mW (US), 6,31mW (EMEA) Red local (LAN) inalmbrica (WLAN, WiFi):

802.11b/g/n/a/ac Banda de radiofrecuencia (RF):

EMEA: 24122472 MHz, 51505850 MHz US: 24122462 MHz, 51505850 MHz Potencia mxima de transmisin:

2.4G Wi-Fi: 63,10mW (US), 79,43mW (EMEA) 5G Wi-Fi B1: 63,10mW (US), 199,53mW (EMEA) 5G Wi-Fi B2: 63,10mW (US), 199,53mW (EMEA) 5G Wi-Fi B3: 100mW (US), 100mW (EMEA) 5G Wi-Fi B4: 100mW (US), 25,12mW (EMEA) Conectores:

2 x RJ45 (Ethernet): 1 x LAN, 1 x PC 2 x 4P4C (terminal, auricolar con cable (no incluido) 1 x RJ12 USB: 2 x tipo A, USB 2.0 1 x conector de alimentacin coaxial Ethernet: 2 x IEEE 802.3 / 1 Gigabit Ethernet switch Power over Ethernet (PoE): IEEE 802.3af, Clase 3 Si PoE no est disponible, use una fuente de alimenta-

cin (no incluido en la caja, disponible fpor separado):

Snom 00004570 Snom 00004571 Mass Power, modelo NBS12E050200UV, artculo n. Rongweixin, modelo R122-0502000ID, artculo n. Limpieza Use un pao antiesttica. No utilice agua ni productos de limpieza, ya que podran daar la superficie o los compo-

nentes electrnicos del aparato. Eliminacin Este telfono est sujeto a la Directriz Europea 2012/19/EC, y no puede ser eliminado con los residuos domsticos generales. Si no sabe dnde puede desechar el dispositivo al final de su vida til, contacte con su municipio, su proveedor de gestin de residuos local, o su vendedor. Instalacin y conexin del telfono Ver las figuras B y C. Inicializacin y registro del telfono Favor tener en cuenta: Necesitar la informacin de re-

gistro que le haya proporcionado su proveedor de inter-

net o su administrador de red, normalmente el nmero de telfono, la extensin, la contrasea y el registro. Cuando haya instalado el telfono y lo haya conectado a la red, el telfono empezar a inicializar. Normalmente la inicializacin es totalmente automtica y se realiza a travs del protocolo DHCP. Si su red no admite DHCP, debe obtener la direccin IP, la mscara de red, el IP de la puerta de enlace y el servidor DNS de su proveedor de internet o su administrador de red e introducirlos manualmente cuando se le solicite en la pantalla. Cuando se le indique, pulse la flecha tecla en el tecla de navegacin para seleccionar una opcin. Pulse para guardar la la tecal con y guarde los cambios con seleccion. o Idioma. El idioma estandar de fbrica es ingls. 1. 2. Huso horario 3. Tono de marcado 4. 5. 6. 7. Reinicia el telfono. 8. La pantalla mostrar: "Bienvenida". Pulse cualquier tecla para registrar. Introduzca la cuenta/el nmero de telfono y pulse Introduzca el registro (Registrar) y pulse

. Introduzca la contrasea y pulse do, se ve la pantalla inactiva. Una vez registra-

Para ms informacin, consulte en nuestra pgina web https://service.snom.com.

Shenzhen Accurate Technology Co., Ltd. Project No.: SZ1211009-52658E-RF FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925) LABEL AND LOCATION Page 1 of 1

VTech Telecommunications Ltd Add: 23/F Tai Ping Ind Center Block 1 57 Ting Kok Rd Tai Po NT, Hong Kong Telephone: (852)2680 5398 Fax: (852)2680 5252 E-mail: Michael_Tsui@vtech.com FCC Confidential Authorization Date: 2021/12/08 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: EW780-S110-00 In accordance with Sections 0.457 and 0.459 of the Commissions Rules, VTech Telecommunications Ltd hereby requests long-term confidential treatment of information accompanying this application as outlined below:

Block Diagram Schematics Operation Description Software Security Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature Michael Tsui Approbation Supervisor

VTech Telecommunications Ltd Add: 23/F Tai Ping Ind Center Block 1 57 Ting Kok Rd Tai Po NT, Hong Kong Telephone: (852)2680 5398 Fax: (852)2680 5252 E-mail: Michael_Tsui@vtech.com FCC Authorization Date: 2021/12/08 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We, VTech Telecommunications Ltd, the undersigned, Hereby authorizes Shenzhen Accurate Technology Co., Ltd.to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Shenzhen Accurate Technology Co., Ltd. on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature Michael Tsui Approbation Supervisor QA-FR-170-B