5.5 Touch Screen Wi-Fi Pan & Tilt Monitor LF2936FHD LF2936-2FHD Parent Guide This guide contains important information. Please keep it for future reference. Need help?
Visit leapfrog.com/support Visit our website leapfrog.com for more information about products, downloads, resources and more. Read our complete warranty policy online at leapfrog.com/warranty. Scan the QR code to enter the Online Manual:
Or go to leapfrog.com/support Touch a nd learn!
Touch a nd learn!
CONFORMS TO UL STD. 62368-1 CERTIFIED TO CSA STD. C22.2 NO.62368-1 Important Safety Instructions The applied nameplate is located at the bottom of the Baby Units base. When using your equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following:
1. Follow all warnings and instructions marked on the product. 2. Adult setup is required. 3. CAUTION: Do not install the Baby Unit at a height above 6.5 feet (2 meters). 4. This product is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such. 5. This product is not intended for use as a medical monitor. 6. Do not use this product near water, for example, near to a bath, sink, swimming pool or shower. 7. CAUTION: Use only the battery provided. There may be a risk of explosion if a wrong type of battery is used for the parent unit. The battery cannot be subjected to high or low extreme temperature and low air pressure at high altitude during use, storage or transportation. Disposal of battery in fire or a hot oven, mechanically crushing or cutting the battery can result in an explosion. Leaving the battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid of gas. Battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. Dispose of used battery according to the information in The RBRC seal. 8. Use only the power adapters included with this product. Incorrect power adapter polarity or voltage can seriously damage the product. Power adapter information:
Baby Unit output: 5V DC 1A;
VTech Telecommunications Ltd.; Model: VT05EUS05100 Parent Unit output: 5V DC 2A;
VTech Telecommunications Ltd.; Model: VT07EUS05200 Rechargeable battery information:
Zhuhai Great Power Energy Co., Ltd.; Lithium battery, 3.7V 5000mAh; Model: GSP806090-5Ah-3.7V-1S1P 9. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-
the-table or cabinet outlet. 10. For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible. 11. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 12. Do not modify the power adapters or replace with other adapters, as this causes a hazardous situation. 13. Do not allow anything to rest on the power cords. Do not install this product where the cords may be walked on or crimped. 14. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult your dealer or electricity supply provider. 15. Do not overload wall outlets or use an extension cord. 16. Do not place this product on an unstable table, shelf, stand or other unstable surfaces. 17. This product should not be placed in any area where proper ventilation is not provided. Slots and openings in the back or bottom of this product are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat source. 18. Never push objects of any kind into this product through the slots because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product. 19. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the product other than specified access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used. 20. You should test the sound reception every time you turn on the units or move one of the components. 21. Periodically examine all components for damage. 22. There is a very low risk of privacy loss when using certain electronic devices, such as baby monitors, cordless telephones, etc. To protect your privacy, make sure the product has never been used before purchase, reset the baby monitor periodically by powering off and then powering on the units, and power off the baby monitor if you will not use it for some time. 23. The small parts of this monitor can be swallowed by babies or small children. Keep these parts out of reach of children. 24. Children should be supervised to ensure that they do not play with the product. 25. The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. SAVE THESE INSTRUCTIONS Cautions 1. Use and store the product at a temperature between 32oF
(0oC) and 104oF (40oC). 2. Do not expose the product to extreme cold, heat or direct sunlight. Do not put the product close to a heating source. 3. Batteries should not be exposed to excessive heat such as bright sunshine or fire. 4. Mishandling batteries can cause burn, fire or explosion hazards. 5. WarningStrangulation HazardChildren have STRANGLED in cords. Keep this cord out of the reach of children (more than 3 ft (0.9m) away). Do not remove warning label on the adapter cord. 6. Never place the Baby Unit(s) inside the babys crib or playpen. Never cover the Baby Unit(s) or Parent Unit with anything such as a towel or a blanket. 7. Other electronic products may cause interference with your baby monitor. Try installing your baby monitor as far away from these electronic devices as possible: wireless routers, radios, cellular telephones, intercoms, room monitors, televisions, personal computers, kitchen appliances and cordless telephones. Precautions for users of implanted cardiac pacemakers Cardiac pacemakers (applies only to digital cordless devices):
Wireless Technology Research, LLC (WTR), an independent led a multidisciplinary evaluation of the research entity, interference between portable wireless devices and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that:
Pacemaker patients Should keep wireless devices at least six inches from the pacemaker. Should NOT place wireless devices directly over the pacemaker, such as in a breast pocket, when it is turned ON. WTRs evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless devices. Electromagnetic fields (EMF) This LeapFrog product complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this users manual, the product is safe to be used based on scientific evidence available today. Once your Baby Unit and Parent Unit are powered on and connected, your Parent Unit displays video from the Baby Unit, and the LINK LED lights steadily. 5. Positioning the Baby Monitor Overview Parent Unit Whats Included 2. Charge the Parent Unit Battery 4. Status Check Parent Guide x 2 x 2 1 set for LF2936FHD 2 sets for LF2936-2FHD Download LeapFrog Baby Care+ App Start monitoring from anywhere. Notes:
Before using the baby monitor for the first time, charge the Parent Unit battery for 12 hours. When the Parent Unit battery is fully charged, the battery icon becomes solid
. The standby time varies depending on your actual usage time and the age of the battery. The battery icon on the screen indicates the battery status:
Battery Indicators Battery Status Action alert displays on the parent unit screen, and the battery icon becomes empty
, with the LED light flashes. The battery icon becomes solid
. The battery has very little charge and may only be used for a short time. Charge without interruption
(about 30 minutes). The battery is fully charged. To keep the battery charged, connect it to AC power when in use. Scan the QR code to download the free LeapFrog Baby Care+ mobile app, or search LeapFrog Baby Care+ on Apple App Store or Google Play Store. 3. Power On or Off the Baby Monitor App Compatibility AndroidTM 6.0 or later iOS 12.0 or later. 1. Slide the On/Off switch to ON to power on your Baby Unit. 2. The Parent Unit turns on automatically after connecting to the power socket, and the welcome screen appears. The green LED light flashes. You can press and hold Power to turn it on or off. LINK 1 3 70
> 3ft (1m)
<3ft (1m) Connect, Charge, and Power On the Baby Monitor 1. Connect the Baby Monitor Note:
POWER LED Light is OFF by default. Press and hold Note:
To avoid interference from other electronic devices, place your baby monitor at least 3 feet (1 meter) away from devices such as wireless routers, microwaves, mobile phones and computers. Cable Management 1 2 3 2 70
3ft (1m)
< 3ft (1m) 70 Caution:
The default volume of your Parent Unit is level 3, and the maximum volume is level 5. If you experience a feedback noise from your baby monitor while positioning:
- Make sure your Baby Unit and Parent Unit are more than 3 feet (1 meter) apart, OR
- Lower the volume of your Parent Unit. 1 2 3-level sound indicator Power /
LCD Off 3 Microphone 4 5 6 Arrow Keys Menu / Select Talk /
Return 1 2 3 4 5 6 7 8 9 10 11 7 8 9 Battery LED indicator Link LED indicator Antenna 10 Power jack 11 RESET 12 Stand 12 12 12 12 13 13 13 Baby Unit 1 2 3 4 5 1 1 2 2 3 3 4 4 5 5 6 7 8 9 6 6 7 7 8 8 9 9 10 11 10 10 11 11 1 2 3 Light sensor Camera Infrared LEDs 4 Microphone 5 6 Night light Night light control key Press to turn the night light on or off. Press and hold to adjust night light brightness level. 7 POWER LED Light 8 On / Off switch 9 Speaker 10 Antenna 11 Power jack 12 Wall mount holes 13 PAIR key The Parent Unit and Baby Unit(s) provided are already paired. Parent Unit Icons Three Ways to Connect Your Baby Monitor Protect Your Privacy and Online Security Overlay Control Panel Lullaby Alert settings Status icon Monitoring mode (For LF2936-2FHD only) View Baby Units in Single mode. View Baby Units in Split screen. View Baby Units in Patrol mode. Main Menu Temporary Night Light Turn on/off 30s night light. Select black-and-white or color night light. Adjust night light brightness. Zoom Pan and Tilt Tap/Press/Press and hold the arrow icons/keys to pan or tilt the camera. Main Menu Icons Monitoring mode (For LF2936-2FHD only) View Baby Units in Single mode. View Baby Units in Split screen. View Baby Units in Patrol mode. Turn on or turn off night light. Select a night light color. Adjust brightness. Set a Timer to turn the night light off. General settings Play/Stop lullaby. Select to play all melodies, or play one of the 5 melodies and 5 soothing sounds. Set a Timer to stop the lullaby. Adjust the play volume level. Configure Wi-Fi Connect Mobile Phone Select Connection Mode Connection Status Video on Mobile App Connection Adjust parent unit screen brightness. Turn on/off Dim Mode. Set the Temperature display format. Set screen off timer. Set the Sound Sensitivity Level to activate the screen. Help and info level;
Turn on/off motion detection alert. Turn on/off low battery alert. Turn on/off no link alert. Customer support Privacy information Support information System information Set screen lock timer Alert Icons Adjust the Baby Unit speaker volume. Select the display language on parent unit. Reset settings. Software update. The parent units battery is low and needs charging. The parent unit is connected to AC power. Displays when motion exceeding the set sensitivity level is detected at a baby unit. Displays when baby unit detected temperature reaches or exceeds the set maximum. Displays when baby unit detected temperaature at or lower than the set minimum. Mute or adjust alerts volume level. Turn on/off Temperature Alert. Select the minimum and maximum Temperature range. Direct mode Parent unit, baby unit 1 and baby unit 2 (For LF2936-2FHD Only) are connected to each others directly. Adjust motion sensitivity Wi-Fi Router mode Wi-Fi Router mode Direct mode The Parent Unit and the Baby Unit are pre-paired and can connect to each other directly in Direct mode by default, which allows you to stream live video right out of the box. It is NOT recommended to continue using Direct Mode connection after initial installation. You are required to set up your monitor in Router mode. Router mode uses your home Wi-Fi network to connect your baby monitor system. It enhances your local access by extending connection range. With the LeapFrog mobile app, your Wi-Fi router (not included) also provides Internet connectivity to your baby monitor system, allowing you to control your Baby Unit wherever you are. Auto mode 70 Local access Mobile access 70 Connecting WiFi to enhance local access Auto mode should only be used when your Wi-Fi router is periodically turned off or the Wi-Fi connection is unstable. It works by automatically selecting the connection mode (Direct or Router) when connecting to the baby unit(s). For routers turned on with good Wi-Fi connectivity, Router mode is the best selection. Mobile app access will not be interrupted in Auto mode. Test the Location 70 70 If you plan to install your Baby Unit to a designated location, and will use your home Wi-Fi network to connect your video monitor, test whether your selected monitoring areas have good Wi-Fi signal strength. Check the Parent Units Wi-Fi signal strength by going to:
> Connection Status 70 Adjust the direction and distance between your Baby Unit, Parent Unit, and Wi-Fi router until you have identified a suitable location with good connection. LeapFrog cares about your privacy and peace of mind. Thats why weve put together a list of industry-recommended best practices to help keep your wireless connection private and your devices protected when online. Ensure your wireless connection is secure Before installing a device, ensure your routers wireless signal is encrypted by selecting the WPA2-PSK with AES setting in your routers wireless security menu. Change default settings Change your wireless routers default wireless network name (SSID) to something unique. Change default passwords to unique, strong passwords. A strong password:
- Is at least 10 characters long.
- Does not contain dictionary words or personal information.
- Contains a mix of uppercase letters, lowercase letters, special characters and numbers. Keep your devices up to date Download security patches from manufacturers as soon as they become available. This will ensure you always have the latest security updates. If the feature is available, enable automatic updates for future releases. Disable Universal Plug and Play (UPnP) on your router UPnP enabled on a router can limit the effectiveness of your firewall by allowing other network devices to open inbound ports without any intervention or approval from you. A virus or other malware program could use this function to compromise security for the entire network. For more information on wireless connections and protecting your data, please review the following resources from industry experts:
1. Federal Communications Commission: Wireless Connections and Bluetooth Security Tips www.fcc.gov/consumers/guides/how-protect-
yourself-online. 2. U.S. Department of Homeland Security: Before You Connect a New Computer to the Internet www.us-cert.gov/ncas/tips/ST15-003. 3. Federal Trade Commission: Using IP Cameras Safely https://www.consumer.ftc.gov/articles/0382-
using-ip-cameras-safely. 4. Wi-Fi Alliance: Discover Wi-Fi Security http://www.wi-fi.org/discover-wi-fi/security. Pan and Tilt the Camera You can swipe on the screen, use the arrow keys or the control panel on the parent unit to pan and tilt the camera. Touch the screen to launch the overlay control panel, then tap
. Tap the icons to move the camera upward, downward, leftward and rightward, or press and hold the icons to move continuously. OR Press the arrow keys on the parent unit to move the camera accordingly, or press and hold the arrow keys to move continuously. Parent unit, baby unit 1 and baby unit 2 (For LF2936-2FHD only) are connected to home Wi-Fi network. Baby unit 1 and 2 are being viewed in Patrol mode (For LF2936-2FHD only). Baby unit 1 and 2 are being viewed in Split mode (For LF2936-2FHD only). Touch screen is locked. B/W night vision is turned on. Color night vision is turned on. Motion detection alert is turned on. Melodies and soothing sounds are playing. Night light is turned on. Auto night light brightness is activated. Parent unit is muted. Temperature alert is turned on. Humidity Temperature Low battery indicator. Battery level indicator The RBRC seal indicates The RBRC seal on the Li-ion that VTech battery Communications, Inc. is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful lives, when taken out of service within the United States and Canada. The program provides a convenient alternative to placing used Li-ion batteries into the trash or municipal waste, which may be illegal in your area. VTechs participation makes it easy for you to drop off the spent battery at local retailers participating in the program or at authorized VTech product service centers. Please call 1 (800) 8 BATTERY for information on Li-ion battery recycling and disposal bans/restrictions in your area. VTechs involvement in this program is part of its commitment to protecting our environment and conserving natural resources. The RBRC Seal and 1 (800) 8 BATTERY are registered trademarks of Call2recycle, Inc. California Energy Commission battery charging testing mode This baby monitor meets the California Energy Commission (CEC) regulations for energy consumption. Your baby monitor is set up to comply with the energy-
conserving standards right out of the box. Follow the instructions to install and charge the battery. The CEC battery charging testing mode is activated while charging. Even if the Parent Unit is paired to Baby Units, the CEC battery charging testing mode is activated while it is powered off and charging. Disclaimer and Limitation of Liability LeapFrog and its suppliers assume no responsibility for any damage or loss resulting from the use of this handbook. LeapFrog and its suppliers assume no responsibility for any loss or claims by third parties that may arise through the use of this software. LeapFrog and its suppliers assume no responsibility for any damage or loss caused by deletion of data as a result of malfunction, dead battery, or repairs. Be sure to make backup copies of important data on other media to protect against data loss. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. CAN ICES-3 (B)/NMB-3(B) Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Warranty: Please visit our website at leapfrog.com for full details of the warranty provided in your country. FCC and IC regulations FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not licence-exempt RSS(s). Operation cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The Baby Unit shall be installed and used such that parts of all persons body are maintained at a distance of approximately 8 in (20 cm) or more. The transmitter and antenna of the Parent Unit shall be held at least 1 in (2.5 cm) from your face. This Class B digital apparatus complies with Canadian requirement: CAN ICES-3 (B)/NMB-3(B) Industry Canada This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. The term IC: before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. RF radiation exposure statement The product complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The Baby Unit should be installed and operated with a minimum distance of 8 in (20 cm) between the Baby Unit and all persons body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. This equipment complies also with Industry Canada RSS-102 with respect to Canadas Health Code 6 for Exposure of Humans to RF Fields. For cETL compliance only Mesures de scurit importantes La plaque signaltique applique est situe au bas du socle de lunit du bb. Lorsque vous utilisez votre appareil, vous devriez toujours suivre certaines mesures de prcaution de base afin de rduire les risques dincendie, dlectrocution et de blessures corporelles, dont ceux qui suivent :
1. Observez toutes les instructions et mises en garde inscrites sur lappareil. 2. Linstallation par un adulte est requise. 3. MISE EN GARDE : Ninstallez pas lunit du bb une hauteur suprieure 2 mtres. 4. Ce produit ne remplace pas la surveillance adulte du nourrisson. La supervision du nourrisson est la responsabilit du parent ou de la personne qui soccupe de lenfant. Ce produit pourrait cesser de fonctionner et, par consquent, vous ne devriez pas prsumer quil continuera de fonctionner correctement pendant une priode de temps donne. 5. De plus, il ne sagit pas dun instrument mdical et ne devrait pas tre utilis comme tel. Ce produit est destin vous aider superviser votre bb. 6. Nutilisez pas cet appareil prs de leau ni de toute autre source dhumidit, par exemple, prs dune baignoire, cuve lessive, vier de cuisine, dans un sous-sol humide ni prs dune piscine, dans un soussol humide ou une douche. 7. MISE EN GARDE : Nutilisez que la pile fournie. Il peut y avoir un risque dexplosion si un mauvais type de pile est utilis pour le dispositif apa-
isant. La pile ne peut pas tre soumise a des tempratures extrmes leves ou basses et a une faible pression atmosphrique a haute altitude pendant son utilisation, son entreposage ou son transport. Le fait de jeter la pile dans au feu ou dans un four chaud, ou dcraser ou de couper mcaniquement la pile peut entrainer une explosion. Le fait de laisser la pile dans un environnement a temprature extrmement leve peut entrainer une explosion ou une fuite de liquide ou de gaz inflammable. Une pile soumise a une pression dair extrmement basse peut provoquer une explosion ou une fuite de liquide ou de gaz inflammable. Mettez au rebut la pile usage conformment aux informations figurant dans la section Le sceau RBRC. 8. Nutilisez que les adaptateurs inclus avec ce produit. Lutilisation dun adaptateur dont la polarit ou la tension serait inadquate risque den-
dommager srieusement le produit et mettre votre scurit en pril. Informations sur les adaptateurs lectriques :
Adaptateur de lunit du parent : Sortie : 5V CC 2A VTech Telecommunications Ltd. Modle : VT07EUS05200 Adaptateur de lunit du bb : Sortie : 5V CC 1A VTech Telecommunications Ltd. Modle : VT05EUS05100 Informations sur les piles rechargeables :
Zhuhai Great Power Energy Co., Ltd. Lithium battery, 3,7V 5000mAh;
Modle : GSP806090-5Ah-3.7V-1S1P 9. Lorsquils sont branchs dans une prise de courant, les adaptateurs secteur ont t conus pour tre orients correctement, soit la verticale ou au plancher. Les broches nont pas t conues pour supporter le poids du bloc dalimentation et le maintenir en place si celuici est branch dans une prise au plafond, sous une table ou dans un meuble. 10. Pour les PRODUITS BRANCHER UNE PRISE DE COURANT, la prise de courant doit tre installe prs du produit, afin dassurer une accessibilit scuritaire la prise de courant. 11. Dbranchez ce produit de la prise de courant avant de procder au nettoyage. Nutilisez pas de nettoyants en arosols. Utilisez un chiffon humide pour le nettoyer. 12. Ne coupez pas les cordons dalimentation pour remplacer les fiches, car ceci peut prsenter un danger potentiel. 13. Ne laissez aucun objet reposer ni appuyer sur le cordon dalimentation. Ninstallez pas cet appareil dans un endroit o lon risque dcraser le cordon dalimentation ou de le pitiner. 14. Ne faites fonctionner cet appareil quavec le type dalimentation indiqu sur ltiquette. Si vous ne connaissez pas le type dalimentation que vous possdez votre domicile, consultez votre marchand ou votre compagnie locale dlectricit. 15. Ne surchargez pas les prises de courant murales ni les rallonges lectriques. 16. Ne placez pas cet appareil sur un chariot, meuble, trpied, support de montage ni table chancelants. 17. Les trous et ouvertures du botier, situs larrire de lappareil ou sous celui-ci, servent arer lappareil. Pour lempcher de surchauffer, ne bloquez sous aucun prtexte ces ouver-
tures et nempchez pas laration adquate de lappareil en le plaant sur un lit, divan, tapis ou toute autre surface similaire. De mme, ne le positionnez pas proximit ni au-dessus dune source de chaleur ou dun calorifre. De plus, ne placez pas lappareil dans un endroit avant de vous assurer quil y ait une bonne circulation dair. 18. Nenfoncez jamais dobjets travers les ouvertures de cet appareil, car ils pourraient entrer en contact avec des points de tension dangereux ou causer des courts-circuits qui peuvent dgnrer en incendies ou en risques dlectrocution. Ne renversez jamais de liquide dans ce produit. 19. Afin de rduire les risques dlectrocution, ne dmontez pas cet appa-
reil, mais apportez-le dans un centre de service autoris. Louverture du botier ou le retrait de toutes pices que contient cet appareil, lexception de laccs autoris certaines portes ou ouvertures, risque de vous exposer des points de tension dangereux ou dautres dangers. Un remontage incorrect peut par la suite prsenter des risques dlectrocution. 20. Vous devriez tester la rception chaque fois que vous mettez 21. Examinez les composantes afin de vrifier si celles-ci ne sont pas lappareil en fonction. endommages. 22. Il existe un trs faible risque de perte de confidentialit avec certains appareils lectroniques (autres coute-bbs, tlphones sans fils etc.). Pour lviter, sassurer que le produit na jamais t utilis avant lachat, rinitialiser lunit de faon priodique, teindre lcoute-bb quand il nest pas en cours dutilisation. 23. Les enfants devraient tre superviss afin de vous assurer quils ne jouent pas avec lappareil. 24. Les petites pices de ce moniteur peuvent tre avales par les bbs ou les petits enfants. Veuillez tenir ces pices hors de porte des enfants. 25. Le produit nest pas conu pour tre utilis par des personnes (incluant des enfants) aux capacits physiques, sensorielles ou mentales rduites ou qui manquent dexprience et de connaissances, moins quon leur ait donn suffisamment de supervision ou dinstructions relativement lutilisation de lappareil par une personne responsable de leur scurit. CONSERVEZ CES INSTRUCTIONS Mises en garde 1. Utilisez et entreposez le produit une temprature entre 0 C (32F) et 40C (104 F). 2. Nexposez pas cet appareil des froids ou des chaleurs extrmes, ainsi qu la lumire directe du soleil. Ne linstallez pas prs dune source de chauffage. 3. Le bloc-piles ne doit pas tre expos la chaleur excessive telle que la lumire du soleil ou au feu0. 4. Risque de brlure, risque dincendie, risque dexplosion associ une mauvaise manipulation de les piles. 5. Avertissement - Risque de strangulation - Les enfants se sont TRANGLS dans des cordons. Gardez ce cordon hors de porte des enfants ( plus de 0,9 m). Nenlevez pas cette tiquette. 6. Ne jamais placer le moniteur lintrieur du berceau ou du parc de bb. Ne jamais couvrir le moniteur ou lunit (s) portative avec un article tel une serviette ou une couverture. 7. Dautres quipements lectroniques peuvent produire des interfrences sur votre moniteur vido et audio. Tentez dinstaller votre moniteur vido ou audio lcart des appareils lectroniques tels que des routeurs sans fil, radios, tlphones cellulaires, interphones, moniteurs, tlphones, ordinateurs personnels, lectromnagers et tlphones sans fil. Stimulateurs cardiaques implants dans lorganisme Les simulateurs cardiaques (ne sapplique quaux dispositifs numriques sans fil) :
Lorganisme Wireless Technology Research, LLC (WTR), une firme de recherche indpendante, a men une valuation pluridisciplinaire des interfrences entre les tlphones sans fil portatifs et les stimulateurs cardiaques implants dans lorganisme. Appuye par lAdministration des aliments et drogues (FDA) des tats-Unis, la firme WTR recommande aux mdecins:
Avis aux dtenteurs de stimulateurs cardiaques Vous devriez maintenir les dispositifs sans fil au moins six pouces du simulateur cardiaque. Ils ne doivent PAS placer le tlphone sans fil directement sur le stimulateur cardiaque, tel que dans une poche de chemise, lorsque celui-ci est en marche. Ltude effectue par lorganisme WRS na pas identifi de risque pour les dtenteurs de simulateurs cardiaques causs par les gens qui utilisent dispositifs sans fil proximit de ceux-ci. Champs lectromagntiques (EMF) Ce produit de LeapFrog est conforme toutes les normes se rapportant aux champs lectromagntiques (EMF) standard. Si vous le manipulez correctement en suivant les instructions de ce guide, son utilisation sera scuritaire pendant de nombreuses annes, selon les meilleures vidences scientifiques dont nous disposons aujourdhui. Online Manual Find the answer to your question on our knowledge-rich Online Manual. Get assisted at your own pace and learn what your monitor is capable of. Scan the QR code to access the Online Manual or visit leapfrog.com/support. Full Manual Video Tutorials FAQs & Troubleshooting Comprehensive help articles on product set up, operations, Wi-Fi and settings. Walk-throughs on features and installation such as mounting the Baby Unit on the wall. Answers to the most commonly asked questions, including troubleshooting solutions. Customer Support Visit our Consumer Support website 24 hours a day at:
United States:
leapfrog.com/support Canada:
leapfrog.ca/support Call our Customer Service number from Monday to Friday 9am - 6pm Central Time:
United States & Canada:
1(800) 717-6031 Technical Specifications Technology Channels Internet connection LCD Wi-Fi 2.4GHz 802.11 b/g/n 1-11 (2412-2462 MHz) Minimum Requirement: 1.5 Mbps @ 720p or 2.5 Mbps @1080p upload bandwidth per Baby Unit 5.5 Color LCD
(IPS 1920x1080 pixels) Nominal effective range Maximum power allowed by FCC and IC. Actual operating range may vary according to environmental conditions at the time of use. Power requirements Parent Unit: 3.7V 5000mAh Lithium-ion battery Baby Unit power adapter: Output: 5V DC @ 1A Parent Unit power adapter: Output: 5V DC @ 2A Warranty Please visit our website at leapfrog.com for full details of the warranty provided in your country. Credits:
The Background Noise sound file was created by Caroline Ford, and is used under the Creative Commons license. The Stream Noise sound file was created by Caroline Ford, and is used under the Creative Commons license. The Crickets At Night sound file was created by Mike Koenig, and is used under the Creative Commons license. The Heart Beat sound file was created by Zarabadeu, and is used under the Creative Commons license. Android TM and Google Play TM are trademarks of Google Inc. App Store is a trademark of Apple Inc., registered in the U.S. and other countries. iOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. Specifications are subject to change without notice. 2022 LeapFrog Enterprises, Inc. a subsidiary of VTech Holdings Limited. All rights reserved. 10/22. LF2936-XFHD_QSG_V1