all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
users manual | Users Manual | 5.61 MiB | ||||
1 | Test Report | |||||||
1 | Test Report | |||||||
1 | Test Report | |||||||
1 | Cover Letter(s) | |||||||
1 | Test Report | |||||||
1 | External Photos | |||||||
1 | Test Report | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Cover Letter(s) | |||||||
1 | Test Report | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos | |||||||
1 | RF Exposure Info | |||||||
1 | Test Report |
1 | users manual | Users Manual | 5.61 MiB |
Baby monitor Users manual w w w.v t e c h b a b y m o n i t o r s . c o m Models:
VM321/VM321-2 Congratulations on purchasing your new VTech product. Before using this product, please read Important safety instructions on the following page of this manual. This manual has all the feature operations and troubleshooting necessary to install and operate your new VTech product. Please review this manual thoroughly to ensure proper installation and operation of this innovative and feature rich VTech product. For support, shopping, and everything new at VTech, visit our website at www.vtechbabymonitors.com. In Canada, please visit www.vtechcanada.com. Product introduction VM321 is a baby monitor which consists of one parent unit (VM321 PU) and one baby unit (VM321 BU). VM321-2 is a baby monitor which consists of one parent unit (VM321-2 PU) and two baby units (VM321-2 BU). i Important safety instructions When using your equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following:
1. 2. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Do not use this product near water such as near a bath tub, wash bowl, kitchen sink, laundry tub or swimming pool, or in a wet basement or shower. Use only the adapters included with this product. Incorrect adapter polarity or voltage can seriously damage the product. Baby unit power adapter:
Input 100-120V AC 50/60 Hz; output: 6V DC 800 mA Parent unit power adapter:
Input 100-120V AC 50/60 Hz; output: 6V DC 800 mA Use only the batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. Do not place this product on an unstable table, shelf, stand or other unstable surfaces. Slots and openings in the back or bottom of this product are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat register. This product should not be placed in any area where proper ventilation is not provided. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult your dealer or local power company. Do not allow anything to rest on the power cord. Do not install this product where the cord may be walked on or crimped. Never push objects of any kind into this product through the slots because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the product other than specified access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used. 3. 4. 5. 6. 7. 8. 9. 10. 11. ii Important safety instructions (continued) 12. 13. Do not overload wall outlets or use an extension cord. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet. 14. CAUTION: There may be a risk of explosion if a wrong type of battery is used for the parent unit. Use only the supplied rechargeable battery (BT298555) or replacement battery pack (BT298555). Dispose of used battery according to the information in The RBRC seal in the users manual. 15. 16. 17. This product is not intended for use as a medical monitor. Adult setup is required. You should test the sound reception every time you turn on the units or move one of the components. Periodically examine all components for damage. Be aware of possible loss of privacy: Conversations may be picked up by other nursery monitors, cordless phones, scanners, etc. 18. 19. SAVE THESE INSTRUCTIONS iii Warning Read this user manual carefully before you use the product and save it for future reference. 1. This baby monitor is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such. Never immerse any part of the baby monitor in water or any other liquid. Check that the voltage indicated on the included power adapters corresponds to the voltage of your power outlets before you connect the product. Only use the included power adapters to connect the parent and baby units to your power outlets. Do not cut off the power adapters to replace them with other plugs, as this causes a hazardous situation. If the power adapters are damaged, please only replace them with the same type in order to avoid a hazard. For the correct type of power adapter, please visit our website at www.vtechbabymonitors.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377. Never use the baby monitor in moist places or close to water. In order to prevent electric shock, do not open the housing of the baby unit or parent unit except for the battery compartment covers. Except for the battery compartments, do not open the housing of the baby units or parent unit in order to prevent electric shock. The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the product. Use only the specified type of battery. To purchase replacement battery, visit our website at www.vtechbabymonitors.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377. If the product will not be used for a long time, unplug the power adapters from the wall outlets, and unplug the rechargeable battery packs from the parent units. Unplug the power cords before replacing batteries. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. iv Cautions 1. Use and store the product at a temperature between 32oF and 104oF. Do not expose the product to extreme cold, heat or direct sunlight. Do not put the product close to a heating source. Make sure the baby unit and the adapter cord are always out of reach of the baby, at least 3 feet away from the baby or crib, to avoid a possible strangulation hazard. Never place the baby unit inside the babys crib or playpen. Never cover the baby unit or parent unit with anything such as a towel or a blanket. Always use the included rechargeable batteries for the parent unit to avoid a hazard. Other electronic products may prevent the baby unit and the parent unit from communicating with each other. Install the baby monitor as far away from these electronic devices as possible:
wireless routers, radios, cellular telephones, intercoms, room monitors, televisions, personal computers, kitchen appliances and cordless telephones. Batteries should not be exposed to excessive heat such as bright sunshine or fire. 2. 3. 4. 5. 6. 7. 8. Electromagnetic fields (EMF) This VTech product complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this users manual, the product is safe to be used based on scientific evidence available today. v Speakerphone volume.....24 Lullaby playback on the baby unit.................24 Night vision ......................24 Parent unit operation .... 25 Power on or off the parent unit ....................25 Speakerphone volume.....25 Zoom ...............................25 View .................................26 Talk to the baby unit ........26 Night vision ......................26 Appendix ........................ 27 Parent unit display screen messages .........27 Parent unit battery ...........28 Expand your baby monitor system .............29 Add or replace a baby unit (optional) ...............29 Remove a baby unit.........30 Troubleshooting ...............31 Operating range...............35 Maintenance ....................35 The RBRC seal ..............36 Limited warranty ..............37 FCC and IC regulations ...40 Technical specifications...42 Index ............................... 43 Table of contents Getting started ................. 1 Parts checklist ...................1 Baby unit overview ............2 Parent unit overview ..........4 Parent unit display screen icon .....................6 Baby unit installation..........7 Parent unit installation .......8 Baby unit battery installation ......................9 Parent unit battery installation ....................11 Parent unit battery charging .......................13 Positioning and operating range ............14 Test your baby monitor before use ....................15 Baby unit default settings .........................15 Parent unit default settings .........................16 Using the menu ...............18 Speakerphone volume.....18 Alert tone .........................18 Parent unit settings ....... 18 Sensitivity ........................19 Temperature ....................20 Lullaby auto play..............21 VOX mode .......................21 LCD brightness ................22 Pair/Unpair.......................22 Language.........................23 Baby unit operation ....... 24 Power on or off the baby unit.......................24 vi Getting started Parts checklist Your baby monitor package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary. Parent unit
(VM321 PU/VM321-2 PU) Baby unit
(VM321 BU/VM321-2 BU)
(1 for VM321 and 2 for VM321-2) Baby unit battery compartment cover
(1 for VM321 and 2 for VM321-2) Parent unit battery compartment cover Battery for Parent unit Helpful guidelines Parent unit power adapter Baby unit power adapter
(1 for VM321 and 2 for VM321-2) Users manual Helpful guidelines To purchase a replacement battery or power adapters, visit our website at www.vtechbabymonitors.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377. 1 Getting started Baby unit overview Camera Antenna
(on/off) Press and hold to turn ON or OFF. Microphone Camera adjuster Pull to adjust camera angle.
(play/stop) Press to play lullaby. Press to stop lullaby playback.
+ (volume) Press to increase the listening volume. _ (volume) Press to decrease the listening volume.
(skip) Press to skip to the next lullaby. Speaker Temperature sensor Battery compartment cover Power jack 2 Getting started Baby unit overview Baby unit lights
(on/off) On in red when the baby unit is powered by the battery. On in white when the baby unit is powered by A/C power. On in red and white when the baby unit is not paired to the parent unit. Flashes in red when the baby unit battery is low. Flashes alternately in red and white when the baby unit is in searching mode. 3 MIC (microphone)
/VOL+
Getting started Parent unit overview Antenna
(on/off) Press and hold to turn on or off.
(zoom) While in single-CAM mode, press to zoom in or out.
(view) Press to see different baby unit, or change between single-CAM and all-CAM mode. Press and hold to turn off the screen and press to turn it on. TALK While in press and hold to talk to the selected baby unit.
/BACK single-CAM mode, While in a menu, press to return to the previous menu. While in zoom area leftward. While in change baby unit selection. mode, press to move the all-CAM mode, press to 4 Press to increase the speakerphone volume. While in a menu, press to scroll up. While in the zoom area upward. While in to change baby unit selection. all-CAM mode, press mode, press to move MENU/SELECT Press to enter the menu. While in a menu, press to choose an item, or save a setting. all-CAM While in mode, press to select the desired baby unit. While in mode, press to move the zoom area rightward. While in mode, press to change baby unit selection. all-CAM
/VOL-
Press to decrease the speakerphone volume. While in a menu, press to scroll down. While in mode, press to move the zoom area downward. While in mode, press to change baby unit selection. all-CAM Speaker Getting started Parent unit overview Parent unit lights LINK TALK LINK TALK On when strong signal strength is detected between the parent unit and the selected baby unit. Flashes slowly when moderate signal strength is detected between the parent unit and the selected baby unit. Flashes quickly when the parent unit cannot link to the selected baby unit. On when the parent unit pack is being charged. Off when the parent unit is fully charged, or when no battery is installed. On when the parent unit is talking to the baby unit. On when the parent unit is in all-CAM mode. On when the speakerphone volume is turned off. 5 Getting started Parent unit display screen icon 57OF CAM1 or displays when moderate signal displays when strong signal strength is Connection status -
detected between the baby unit and the parent unit. Connection status -
strength is detected between the baby unit and the parent unit. Connection status -
baby unit and the parent unit os lost. Zoom - displays when the camera at the selected baby unit has zoomed in. Lullaby - displays when a lullaby is playing by the baby unit that is being viewed. displays when the link between the 570F or CAM1 or CAM2 or CAM3 or CAM4 Temperature alert - displays when the temperature alert is set to on. Real-time temperature - displays the real-time temperature from the selected baby unit. Sound level indicators - lights up accordingly to the scales of loudness when there is sound transmitted from the baby unit. Speakerphone volume - lights up when adjusting the speakerphone volume level. Current view status - displays the number of the baby unit that is being viewed when in single-CAM view mode. Current view status - displays the highlighted baby unit when in all-CAM view mode. Current view status - this icon does not appear when the parent unit has no paired baby unit. animates Battery status -
when the battery is charging. Battery status -
Battery status -
charging. Battery status -
operates using AC power, or the battery has been installed incorrectly. displays when the battery is fully charged. displays when the battery is low and needs displays when no battery is installed but 6 Getting started Baby unit installation Install the baby unit as shown below. Make sure that the power outlet is not controlled by a wall switch. Keep the power adapter cord away from childrens reach and bundle the adapter cord neatly with the attached self-adhesive strap. Power outlet not controlled by a wall switch Baby unit power adapter Self-adhesive strap Warning tag Baby unit Use only the baby unit power adapters supplied with this product. To order a replacement, visit our website at www.vtechbabymonitors.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377. The baby unit power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet. 7 Getting started Parent unit installation Install the parent unit as shown below. Make sure that the power outlet is not controlled by a wall switch. Keep the adapter cord away from childrens reach and bundle the adapter cord neatly with the attached self-adhesive strap. Power outlet not controlled by a wall switch Parent unit power adapter Self-adhesive strap Warning tag Parent unit Use only the parent unit power adapter supplied with this product. To order a replacement, visit our website at www.vtechbabymonitors.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377. The parent unit power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet. 8 Getting started Baby unit battery installation You can power up the baby unit by connecting it to AC power or to the 1.5V AA batteries. Even if the baby unit is connected to AC power, we recommend you also install the 1.5V AA batteries. This guarantees automatic backup in case of a power outage. Install the batteries as shown below. 1. Unplug the baby unit power adapter from the power outlet. Unplug the small end of the power adapter from the power jack on the baby unit. If the battery compartment cover is on the baby unit, push the tab and then pull up until the battery compartment releases. 2. 9 Getting started Baby unit battery installation (continued) 3. Insert 4 pcs 1.5V AA Alkaline batteries (not supplied) into the battery compartment, noting the proper polarity (+ and -) markings between the battery and metallic contacts inside the battery compartment. Then replace the battery compartment cover. 4. Plug the small end of the baby unit power adapter to the power jack on the baby unit. Then plug the baby unit power adapter into the power outlet. If the baby unit will not be used for a long time, disconnect and remove the battery to prevent possible leakage. Baby unit cannot charge any rechargeable AA batteries but you can use rechargeable AA batteries for the baby unit. 10 Getting started Parent unit battery installation You can power up the parent unit by connecting it to AC power or to the rechargeable battery provided. Even if the parent unit is connected to AC power, we recommend you also install the battery. This guarantees continued operation in case of a power outage. Install the battery as shown below. 1. Unplug the parent unit power adapter from the power outlet. Unplug the small end of the power adapter from the power jack on the parent unit. If the battery compartment cover is on the parent unit, press on the grooved tab and slide to detach. 2. 3. Place the battery into the battery compartment as shown. 11 Getting started Parent unit battery installation (continued) 4. Replace the battery compartment cover. Align the cover flat against the battery compartment, then slide it towards the center of the parent unit until it clicks into place. 5. 6. Plug the small end of the power adapter from the power jack on the parent unit. Then plug the parent unit power adapter into the power outlet. When the battery is correctly installed, the parent unit turns on when charging. light on the light The turns on when charging. If the parent unit will not be used for a long time, disconnect and remove the battery to prevent possible leakage. Use only the battery supplied with this product. To purchase replacement battery, visit our website at www.vtechbabymonitors.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377. 12
(on/off) for 2 seconds to turn on the parent icon indicates the battery status (see the table Getting started Parent unit battery charging Once you have installed the parent unit battery and connect the parent unit power adapter to a power outlet, the screen is still off. Press unit. The below). The parent unit battery is fully charged after XX hours of continuous charging. See the table on page 28 for battery operating times. When the parent unit is operating in battery mode and the battery is low, you need to charge the parent unit without interruption for at least 30 minutes to give the parent unit enough charge to use for a short time. When operating with a low battery, the parent unit displays BATTERY LOW AT PARENT UNIT along with the it plays short beeps to alert you. The following table summarizes the battery charge indicators and actions to take. icon. The light flashes and Battery indicators The battery icon is off and displays. The screen displays BATTERY LOW AT PARENT UNIT and the light flash. The battery icon becomes solid
. Battery status No battery is installed. The parent unit can only be used if it is connected to a power outlet. Battery has very little charge and may be used for only a short time. Battery is fully charged. Action Install the parent unit battery. Charge without interruption
(at least 30 minutes). Charge without interruption (about 30 minutes). To keep the battery charged, connect it to a power source when not in use. When you charge the battery initially or it is not used for a long period of time, charge it for XX hours continuously. It takes longer to charge the battery when the parent unit is turned on. To shorten the charging time, turn the parent unit off. 13 Getting started Positioning and operating range Positioning the baby monitor Place the baby unit at least 3 feet away from your baby. Place the parent unit within the operating range (see below) of the baby unit. Make sure the parent unit is at least 3 feet away from the baby unit or other parent unit to avoid acoustic feedback. At least 3 feet Operating range The operating range of the baby monitor is up to 1000 feet outdoors or 150 feet indoors. The actual operating range may vary depending on the environmental conditions and other interferences such as walls, doors and other obstructions. 14 Getting started Test your baby monitor before use 1. on the baby unit until the Place the parent unit and the baby unit in the same room to test the product. Make sure the baby unit is at least 3 feet away from the parent unit. Press and hold turns on. Press and hold Waiting for linking. When the parent unit is linked to the baby unit, the screen displays an image from the baby unit. Your baby monitor is now ready for use. on the parent unit until the screen displays
(on/off) light 2. 3. 4. If the parent unit cannot link to the selected baby unit, the screen displays No link at CAM# and
. Baby unit default settings Default settings are indicated by an asterisk(*). Setting VOLUME Function Set the speakerphone volume. Set the lullaby playback volume while the lullaby is playing. LULLABY Lullaby playback in chronological order. Options Level 1 Level 2 Level 3*
Level 4 Level 5 Lullaby 1*
Lullaby 2 Lullaby 3 Lullaby 4 Lullaby 5 15 Getting started Parent unit default settings Default settings are indicated by an asterisk(*). Main setting VOLUME Setting
Function Set the speakerphone volume of the parent unit. Options
(Volume off)
(Volume 1)
(Volume 2)
(Volume 3)*
(Volume 4)
(Volume 5) ALERT TONE SENSITIVITY LOW BATTERY TONE NO LINK ALERT On*
Off On*
Off Set whether the parent unit beeps whenever the battery is low. Set whether the parent unit beeps whenever the link between the parent unit and the baby unit is lost. sensitivity level of the baby unit. ALL CAM Set the sound CAM 1 CAM 2 CAM 3 CAM 4 Level 1 Level 2 Level 3*
Level 4 Level 5 TEMPERATURE MINIIMUM
- ALL CAM
- CAM 1
- CAM 2
- CAM 3
- CAM 4 MAXIMUM
- ALL CAM
- CAM 1
- CAM 2
- CAM 3
- CAM 4 Set the desired minimum temperature detected for the room where the baby unit is located. Set the desired maximum temperature detected for the room where the baby unit is located. Fahrenheit:
52OF - 69OF (57OF*) Celsius:
11OC - 20OC Fahrenheit:
70OF - 86OF (85OF*) Celsius:
21OC - 30OC 16 Getting started Parent unit default settings (continued) Main setting Setting TEMPERATURE ALERT Options On Off*
- ALL CAM
- CAM 1
- CAM 2
- CAM 3
- CAM 4 FORMAT Function Set whether the parent unit beeps whenever the temperature is not within the set temperature range. Set the type of temperature scale of the baby unit. ALL CAM Set whether the CAM 1 CAM 2 CAM 3 CAM 4 baby unit can automatically play lullabies when the noise near the baby unit reaches the set sensitivity level. Set whether the parent unit screen wakes up from sleep mode whenever there is any sound detected by the baby unit. Set the brightness of the parent unit screen.
Pair CAM Register a baby Unpair CAM unit to the selected CAM slot. Deregister a baby unit from the selected CAM slot. Set the screen display language. 17 Fahrenheir*
Celsius On Off*
On*
Off Level 1 Level 2 Level 3*
Level 4 Level 5 CAM1 (EMPTY/PAIRED) CAM2 (EMPTY/PAIRED) CAM3 (EMPTY/PAIRED) CAM4 (EMPTY/PAIRED) ENGLISH*
FRANCAIS ESPANOL LULLABY AUTO PLAY VOX MODE LCD BRIGHTNESS PAIR/UNPAIR LANGUAGE Parent unit settings Using the menu To enter the parent unit menu:
1. 2.
/VOL+ or
/VOL- until the feature you desire is Press MENU/SELECT when the parent unit is not in use. Press highlighted in the list on the left side of the screen. Press MENU/SELECT to enter that feature menu. Press
/VOL- until the feature or option you desire is highlighted in the list on the right side of the screen. Press MENU/SELECT to enter that feature menu or confirm your selection. Repeat step 3 until the desired feature is set.
/VOL+ or 3. To return to the previous menu, press
/BACK. Speakerphone volume You can change the speakerphone volume or turn it off. When the speakerphone volume is off, appears on the screen and the To adjust the speakerphone volume:
Press
/VOL- at any time on the parent unit. light turns on.
/VOL+ or Alert tone You can turn the low battery tone alert and/or no link alert on or off. To set the low battery tone alert of the parent unit:
1. 2. Press MENU/SELECT when the parent unit is not in use. Press
/VOL+ or MENU/SELECT. Press MENU/SELECT again to choose LOW BATTERY TONE. Press
/VOL+ or MENU/SELECT.
/VOL- to choose ALERT TONE, then press
/VOL- to choose ON or OFF, then press 3. 4. Low battery tone alert turns on only for the selected baby unit single-CAM mode. Low battery tone alert turns on while in for all baby units while in all-CAM mode. 18 Parent unit settings Alert tone (continued) To set the no link alert of the parent unit:
1. Press MENU/SELECT when the parent unit is not in use. Press
/VOL+ or MENU/SELECT. Press
/VOL+ or press MENU/SELECT. Press MENU/SELECT to confirm your selection.
/VOL+ or 2. 3. 4.
/VOL- to choose NO LINK ALERT, then
/VOL- to choose ON or OFF, then press
/VOL- to choose ALERT TONE, then press Sensitivity You can change the sound sensitivity level of the baby unit from the parent unit. The higher the sound sensitivity level is set at the parent unit, the more sensitive the baby unit is in collecting sounds and transmit to the parent unit. To set the sound sensitivity level of the baby unit:
1. 2. Press MENU/SELECT when the parent unit is not in use. Press
/VOL+ or MENU/SELECT. Press
/VOL+ or then press MENU/SELECT.
/VOL- to choose the desired sensitivity Press level, then press MENU/SELECT to confirm your selection.
/VOL- to choose the desired baby unit,
/VOL- to choose SENSITIVITY, then press
/VOL+ or 3. 4. The baby unit must be turned on when accessing the SENSITIVITY menu of the parent unit. When the sensitivity level is set to Level 5, any sounds received from the baby unit will always be transmitted to the parent unit. 19 2. Parent unit settings Temperature To set the minimum temperature of the baby unit:
Press MENU/SELECT when the parent unit is not 1. in use. Press press MENU/SELECT. Press
/VOL+ or MENU/SELECT. Press
/VOL+ or then press MENU/SELECT. Press then press MENU/SELECT to confirm your selection.
/VOL+ or
/VOL+ or 3. 4. 5.
/VOL- to choose the desired baby unit,
/VOL- to choose MINIMUM, then press
/VOL- to choose TEMPERATURE, then
/VOL- to choose the desired temperature,
/VOL+ or
/VOL- to choose TEMPERATURE, then To set the maximum temperature of the baby unit:
1. 2. Press MENU/SELECT when the parent unit is not in use. Press press MENU/SELECT. Press
/VOL+ or MENU/SELECT. Press
/VOL+ or then press MENU/SELECT. Press then press MENU/SELECT to confirm your selection.
/VOL- to choose the desired baby unit,
/VOL- to choose MAXIMUM, then press
/VOL- to choose the desired temperature, 3. 4. 5.
/VOL+ or
/VOL+ or
/VOL- to choose TEMPERATURE, then To set the temperature alert of the baby unit:
1. 2. Press MENU/SELECT when the parent unit is not in use. Press press MENU/SELECT. Press
/VOL+ or MENU/SELECT. Press
/VOL+ or then press MENU/SELECT. Press MENU/SELECT to confirm your selection.
/VOL- to choose ALERT, then press
/VOL- to choose the desired baby unit,
/VOL- to choose ON or OFF, then press 3. 4. 5.
/VOL+ or 20 Parent unit settings Temperature (continued) To set the type of temperature scale:
1.
/VOL+ or Press MENU/SELECT when the parent unit is not in use. Press press MENU/SELECT. Press MENU/SELECT again to choose FORMAT. Press then press MENU/SELECT to confirm your selection.
/VOL+ or
/VOL- to choose TEMPERATURE, then
/VOL- to choose FAHRENHEIT or CELSIUS, 2. 3. 4. Lullaby auto play You can set whether the lullaby auto play turns on automatically when the sound level from the baby unit reaches the preset sensitivity sound level. The total duration of lullaby playback is about 15 minutes and it plays from where you stopped. To set the lullaby auto play of the parent unit:
1. 2. Press MENU/SELECT when the parent unit is not in use. Press then press MENU/SELECT. Press press MENU/SELECT. Press MENU/SELECT to confirm your selection.
/VOL+ or
/VOL+ or
/VOL+ or 3. 4.
/VOL- to choose ON or OFF, then press
/VOL- to choose LULLABY AUTO PLAY,
/VOL- to choose the desired baby unit, then VOX mode You can set whether the parent unit turns on automatically whenever there is any sound detected by the baby unit. When the screen is turned off and VOX mode is set to On, the screen turns on for 30 seconds whenever any sound is detected by the baby units and then turns off automatically. To set the VOX mode of the parent unit:
1. 2. Press MENU/SELECT when the parent unit is not in use. Press
/VOL+ or MENU/SELECT. Press
/VOL+ or MENU/SELECT to confirm your selection.
/VOL- to choose ON or OFF, then press
/VOL- to choose VOX MODE, then press 3. 21 Parent unit settings LCD brightness You can change the brightness of the parent unit screen. To set the brightness of the parent unit screen:
1. 2.
/VOL+ or
/VOL- to choose LCD BRIGHTNESS, then Press MENU/SELECT when the parent unit is not in use. Press press MENU/SELECT. Press brightness of the parent unit screen changes as you scroll through the choices. Press MENU/SELECT to confirm your selection.
/VOL- to scroll through the choices, the
/VOL+ or 3. 4.
/VOL+ or Pair/Unpair You can pair a maximum of four baby units to your parent unit. To pair a baby unit:
1. 2.
/VOL- to choose the desired baby unit slot, Press MENU/SELECT when the parent unit is not in use.
/VOL- to choose PAIR/UNPAIR, then Press press MENU/SELECT. Press MENU/SELECT again to choose PAIR CAM. Press then press MENU/SELECT. The screen displays Please press both [ ] and [+] key on CAM side until POWER indicator flashes Red and White light alternately. Then and + for 5 seconds on the new baby unit press and hold at the same time. on the new baby unit flashes red and white alternately. When pairing is successful, the screen displays the newly paired baby unit. The red when it is powered by battery or turns white when it is powered by AC power. light on the new baby unit turns 3. 4. 5.
/VOL+ or Any new baby unit paired to an occupied baby unit slot will unpair the current baby unit. 22 Parent unit settings Pair/Unpair (continued) To unpair a baby unit:
1. 2. 3. 4. 5. 6.
/VOL+ or
/VOL+ or
/VOL+ or
/VOL- to choose PAIR/UNPAIR, then Press MENU/SELECT when the parent unit is not in use. Press press MENU/SELECT. Press Press then press MENU/SELECT. Press When unpairing is successful, the screen displays the next paired baby unit or return to the previous baby unit viewing screen. If all baby units are unpaired, the screen displays No CAM paired.
/VOL- to choose UNPAIR CAM.
/VOL- to choose the desired baby unit, and then press MENU/SELECT. Language You can select English, Franais or Espaol to be used in all screen displays. To change the screen language:
1. 2. Press MENU/SELECT when the parent unit is not in use. Press
/VOL+ or MENU/SELECT. Press
/VOL+ or Press MENU/SELECT to confirm your selection.
/VOL- to scroll through the choices. 3. 4.
/VOL- to choose LANGUAGE, then press 23 Baby unit operation Power on or off the baby unit Press and hold the baby unit. The Press and hold turn off the baby unit. The for 2 seconds to turn on light turns on. for 2 seconds again to light turns off. Speakerphone volume You can change the speakerphone volume. Changing the speakerphone volume also changes the lullaby playback volume. The lowest speakerphone volume is Level 1 and the highest speakerphone volume is Level 5. To adjust the speakerphone volume:
Press + or - at any time on the baby unit. Lullaby playback on the baby unit The total duration of lullaby playback is about 15 minutes and it plays from where you stopped To turn on lullaby playback:
Press on the baby unit. To skip to the next lullaby:
Press on the baby unit to skip to the next lullaby. To turn off lullaby playback from the baby unit:
Press on the baby unit to stop. Lullaby playback is paused when the parent unit is talking to the baby unit in TALK mode. Lullaby playback resumes when the parent unit finishes using the TALK feature. Night vision When the baby unit is turned on in a dark room, the baby unit automatically uses its infrared LEDs to transmit a clear image of baby to parent units, so you can monitor your baby at night. 24 Parent unit operation Power on or off the parent unit Press and hold for 2 seconds to turn on the parent unit. The display screen turns on. Press and hold for 2 seconds again to turn off the parent unit. The display screen turns off. Speakerphone volume You can change the speakerphone volume or turn it off. When the speakerphone volume is off, appears on the screen. To adjust the speakerphone volume:
Press parent unit.
/VOL- at any time on the
/VOL+ or Zoom You can zoom in and out of any baby unit. To zoom in and out while in single-CAM view mode:
Press
/VOL-, to move the zoomed image upwards, downwards, leftwards or rightwards correspondingly. Press to zoom out. to zoom in. Press
/BACK or
/VOL+, again
/VOL+, To zoom in and out while in all-CAM view mode:
/VOL-, Press baby unit, then press to zoom in. Press zoomed image upwards, downwards, leftwards or rightwards correspondingly. Press again to zoom out. to choose the desired again to move the
/BACK or or MENU/SELECT. Press
/BACK or
/VOL+,
/VOL-, 25 Parent unit operation View You can change the screen to view the video from different baby units. When the screen is turned off and VOX mode is set to On, the screen turns on for 30 seconds whenever any sounds is detected by the baby units and then turns off automatically. To view different baby units:
Press are in chronological order: CAM1, CAM2, CAM3, CAM4 and all-CAM mode. To turn the screen on or off:
Press and hold When the screen is turned off, press to scroll to the desired baby units. Baby units for 2 seconds to turn off the screen. to turn it on. Talk to the baby unit You can broadcast messages from the parent unit to the speakerphone of the desired baby unit. To talk to the baby unit:
1. 2. Press Press and hold TALK when the parent unit is in single-CAM view mode. Speak towards the MIC (microphone) on the parent unit. The TALK light is on when the voice connection to the baby unit is made. Your voice is broadcast to the baby unit. to choose the desired baby unit. The TALK feature does not work in all-CAM mode. If the speakerphone volume of the parent unit is set to OFF, it will be reset to the default volume when you press and hold TALK. Lullaby playback is paused when the parent unit is talking the baby unit in TALK mode. Lullaby playback resumes when the parent unit finishes using the TALK feature. Night vision When the baby unit is turned on in a dark room, the baby unit automatically uses its infrared LEDs to transmit a clear image of baby to parent units, so you can monitor your baby at night. However, images transmitted from the baby units infrared LEDs are in black and white only. 26 Appendix Parent unit display screen messages Battery low at CAM#
Battery low at parent unit Battery empty at parent unit Battery empty Powering off... No link at CAM#
Sound detected at CAM#
Temperature too low at CAM#
When the baby unit is powered by batteries, the selected baby unit batteries need to be changed. It will be powered off after 30 seconds automatically. When the parent unit is powered by the battery, it needs to be recharged. When the parent unit is powered by the battery, is almost out of power and needs to be recharged. It will be powered off after 10 seconds automatically. Parent unit is being powered off. The selected baby unit is not linked to the parent unit. Sound detected from the selected baby unit is above the set sensitivity level. Temperature detected from the selected baby unit is below the set minimum temperature. Waiting for linking Temperature too high at CAM# Temperature detected from the selected baby unit is above the set maximum temperature. The link between the parent unit and the selected baby unit is lost, or the parent unit is out of range of the selected baby unit. The screen turns off after 10 seconds automatically. 27 Appendix Parent unit battery It takes up to 12 hours for the battery to be fully charged. When it is fully charged, you can expect the following performance:
Operation While in standby* mode While in monitoring** mode
*Parent unit is not charging or in TALK mode. There is not any kind of detection from the baby unit.
**The sensitivity level is set at Level 3. Monitoring times vary depending on your actual use and the age of the battery. Operating time Up to X days Up to X hours The battery needs charging when:
A new battery is installed in the parent unit. The parent unit beeps. The battery is properly installed and no battery icon displays on the screen. BATTERY LOW AT PARENT UNIT and unit screen. displays on the parent CAUTION:
To reduce the risk of fire or injury, read and follow these instructions:
Use only the battery provided or equivalent. To order a replacement, visit our website at www.vtechbabymonitors.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377. Do not dispose of the battery in a fire. Check with local waste management codes for special disposal instructions. Do not open or mutilate the battery. Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed. Exercise care in handling the battery in order not to create a short circuit with conductive materials. Charge the battery provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual. Observe proper polarity orientation between the battery and metallic contacts. To prevent fire or shock hazard, do not expose this product to water or any type of moisture. 28 Appendix Expand your baby monitor system The baby units and parent unit provided with your baby monitor system are already paired. This baby monitor system accommodates up to four baby units. Add or replace a baby unit (optional) You can add or replace baby units (VM301, purchased separately) to your baby monitor system. Each baby unit must be paired to the parent unit before use. You need to power on the baby unit (pages 7, 9 and 25) and the parent unit (pages 8, 11 and 25) before pairing. To add or replace a baby unit:
1. 2.
/VOL+ or
/VOL+ or
/VOL- to choose the desired baby unit Press MENU/SELECT when the parent unit is not in use.
/VOL- to choose PAIR/UNPAIR, then Press press MENU/SELECT. Press MENU/SELECT again to choose PAIR CAM. Press slot, then press MENU/SELECT. The screen displays Please press both [ ] and [+] key on CAM side until POWER indicator flashes Red and White light alternately. Then and + for 5 seconds on the new baby unit press and hold at the same time. on the new baby unit flashes red and white alternately. When pairing is successful, the screen displays the newly paired baby unit in single-view mode. The light on the new baby unit turns red when it is powered by battery or turns white when it is powered by AC power. 3. 4. 5. If pairing fails, the screen displays Pairing failed. Try the pairing process again. Any new baby unit paired to an occupied baby unit slot will unpair the current baby unit. 29
/VOL+ or Appendix Remove a baby unit If you want to remove a baby unit, you need to power on the baby unit (pages 7, 9 and 25) and the parent unit (pages 8, 11 and 25) before unpairing. To remove a baby unit:
1. 2. Press MENU/SELECT when the parent unit is not in use.
/VOL- to choose PAIR/UNPAIR, then Press press MENU/SELECT. Press
/VOL+ or MENU/SELECT. Press
/VOL+ or then press MENU/SELECT. Press [zoom] and then press MENU/SELECT to confirm your selection. When unpairing is successful, the screen displays the next paired baby unit or returns to the previous baby unit viewing screen. If all baby units are unpaired, the screen displays No CAM paired.
/VOL- to choose the desired baby unit,
/VOL- to choose UNPAIR CAM, then press 3. 4. 5. 6. If unpairing fails, you need to reset the baby monitor and then try the unpairing process again. To reset:
1. 2. Power off the baby unit and the parent unit. Unplug the power and/or batteries from the baby unit and the parent unit, then plug them back in. Power on the baby unit and the parent unit. 3. 30 Appendix Troubleshooting If you have difficulty with your baby monitor, please try the suggestions below. For customer service, visit our website at www.vtechbabymonitors.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377. My baby monitor does not work at all. Make sure the baby unit, parent unit and the batteries are installed and charged correctly (pages 7 to 13). For optimum daily performance, charge the parent unit after use. Make sure the power adapters are securely plugged into the outlet not controlled by a wall switch. Make sure the adapter cords are plugged firmly into the baby unit and parent unit. Make sure the baby unit and the parent unit are turned on. The parent unit may be too far away from the baby unit. Move the parent unit closer to the baby unit (but not less than 3 feet). Unplug the electrical power to the baby unit and parent unit. Wait for approximately 15 seconds, then plug it back in. Turn on the baby unit and the parent unit. Allow up to one minute for the baby unit and the parent unit to synchronize. Install the correct type of batteries in the baby unit and watch carefully the proper polarity (+ and -) markings between the battery and metallic contacts inside the battery compartment. Charge the battery in the parent unit for up to XX hours. If the parent unit battery is completely depleted, it may take up to 30 minutes to charge the parent unit before BATTERY LOW AT PARENT UNIT appears on the screen (page 13). Completely remove and install the batteries again. If that still does not work, it may be necessary to purchase new batteries. Significant amount of obstructions between baby unit and parent unit such as walls, ceilings and buildings. Try moving the baby unit to another part of the room. Other electronic products may prevent the baby unit and the parent unit from communicating with each other. Install the baby monitor as far away from these electronic devices as possible: wireless routers, radios, cellular telephones, intercoms, room monitors, televisions, personal computers, kitchen appliances and cordless telephones. 31 Appendix Troubleshooting The on the parent unit screen. icon and BATTERY LOW AT PARENT UNIT display Charge the battery in the parent unit for up to XX hours. Completely remove and install the battery again and use it until fully depleted, then recharge the battery in the parent unit for up to XX hours. If the above measures do not correct the problem, replace the battery. The battery does not charge in the parent unit or the parent unit battery does not accept charge. Make sure the battery is installed in the parent unit battery compartment correctly. The light on the parent unit should be on when charging. Completely remove and install the battery again, then charge for up to XX hours. If the The If the battery is completely depleted, it may take up to 30 minutes to charge the parent unit before BATTERY LOW AT PARENT UNIT appears on the screen (page 13). Purchase a new battery. Refer to Parent unit battery on page 28. icon and the light on the parent unit is off below. light on the parent unit are not on, refer to The light on the parent unit is off. Make sure the parent unit battery is installed correctly (page 6). When the parent unit is powered on by AC power, the even the battery is fully charged. light is off My parent unit does not play any sound when there is noise from the baby unit. Make sure the parent unit is turned on. The parent unit may be too far away from the baby unit. Move the parent unit closer to the baby unit (but not less than 3 feet). If the parent unit is powered on by battery, make sure there is sufficient charge on the parent unit battery. Charge the battery in the parent unit for up to XX hours. Make sure the parent unit speakerphone volume is not set to OFF
(pages 18 and 25). Make sure the sound sensitivity level of the baby unit is not set to the lowest level (page 19). Make sure the power adapters are plugged in properly (pages 7 and 8). 32 Appendix Troubleshooting Significant amount of obstructions between baby unit and parent unit such as walls, ceilings and buildings. Try moving the baby unit to another part of the room. Other electronic products may prevent the baby unit and the parent unit from communicating with each other. Install the baby monitor as far away from these electronic devices as possible: wireless routers, radios, cellular telephones, intercoms, room monitors, televisions, personal computers, kitchen appliances and cordless telephones. Completely remove and install the battery again. Turn on the baby unit and the parent unit. Allow up to one minute for the parent unit and the baby unit to synchronize. My parent unit beeps and is not performing normally. Move the parent unit closer to the baby unit (but not less than 3 feet).
(but not less than 3 feet).. The parent unit may be out of range. If the parent unit is powered on by battery, it may be running out of battery. Charge the battery in the parent unit for up to XX hours. Reset the parent unit and the baby units by turning them off, unplugging the electrical power to the parent unit and the baby units. Wait for 15 seconds and plug them back in again. Turn on the baby units and the parent unit. Allow up to one minute for the parent unit and the baby units to synchronize. Other electronic products may prevent the baby unit and the parent unit from communicating with each other. Install the baby monitor as far away from these electronic devices as possible: wireless routers, radios, cellular telephones, intercoms, room monitors, televisions, personal computers, kitchen appliances and cordless telephones. The link between the baby unit and the parent unit is lost every now and then, and Im experiencing sound interruptions. Move the parent unit closer to the baby unit (but not less than 3 feet). The parent unit may be out of range. Reset the parent unit and the baby units by turning them off unplugging the electrical power to the parent unit and the baby units. Wait for 15 seconds and plug them back in again. Turn on the baby units and the parent unit. Allow up to one minute for the parent unit and the baby units to synchronize. 33 Appendix Troubleshooting Common cure for electronic equipment. If the baby monitor is not responding normally, try the following (in the order listed):
- Disconnect the power to the baby unit and the parent unit.
- Completely remove and install the battery again.
- Wait a few minutes before connecting power back to the baby unit and the parent unit.
- Charge the parent unit battery for up to 12 hours.
- Wait for the parent unit to synchronize with the baby unit. Allow up to one minute for this to take place. 34 Appendix Operating range This baby monitor operates with the maximum power allowed by the Federal Communications Commission (FCC). Even so, this baby unit and parent unit can communicate over only a certain distance - which can vary with the locations of the baby unit, parent unit, the weather, and the layout of your home. When the parent unit is out of range, the parent unit displays Waiting for linking. To improve reception, move closer to the baby unit (but not less than 3 feet). Maintenance Taking care of your baby monitor Your baby monitor contains sophisticated electronic parts, so it must be treated with care. Avoid rough treatment Place the baby unit and parent unit down gently. Save the original packing materials to protect your baby monitor if you ever need to ship it. Avoid water Your baby monitor can be damaged if it gets wet. Do not use the parent unit and/or baby unit outdoors in the rain, or handle it with wet hands. Do not install the baby monitor near a sink, bathtub or shower. Electrical storms Electrical storms can sometimes cause power surges harmful to electronic equipment. For your own safety, use caution when using electrical appliances during storms. Cleaning your baby monitor Your baby monitor has a durable plastic casing that should retain its luster for many years. Clean it only with a soft cloth slightly dampened with water or mild soap. Do not use excess water or cleaning solvents of any kind. Remember that electrical appliances can cause serious injury if used when you are wet or standing in water. If the baby units and/or parent unit should fall into water, DO NOT RETRIEVE IT UNTIL YOU UNPLUG THE POWER CORDS FROM THE WALL. Then pull the units out by the unplugged cords. 35 Appendix The RBRC seal The RBRC seal on the lithium-ion battery indicates that VTech Communications, Inc. is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful lives, when taken out of service within the United States and Canada. The RBRC program provides a convenient alternative to placing used lithium-ion batteries into the trash or municipal waste, which may be illegal in your area. VTechs participation in RBRC makes it easy for you to drop off the spent battery at local retailers participating in the RBRC program or at authorized VTech product service centers. Please call 1 (800) 8 BATTERYTM for information on Li-ion battery recycling and disposal bans/restrictions in your area. VTechs involvement in this program is part of its commitment to protecting our environment and conserving natural resources. RBRC is a registered trademark of Rechargeable Battery Recycling Corporation. 36 Appendix Limited warranty What does this limited warranty cover?
The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase (Consumer or you) that the Product and all accessories provided in the sales package (Product) are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the Product operating instructions. This limited warranty extends only to the Consumer for Products purchased and used in the United States of America and Canada. What will VTech do if the Product is not free from defects in materials and workmanship during the limited warranty period
(Materially Defective Product)?
During the limited warranty period, VTechs authorized service representative will repair or replace at VTechs option, without charge, a Materially Defective Product. If we repair the Product, we may use new or refurbished replacement parts. If we choose to replace the Product, we may replace it with a new or refurbished Product of the same or similar design. We will retain defective parts, modules, or equipment. Repair or replacement of the Product, at VTechs option, is your exclusive remedy. VTech will return the repaired or replacement Products to you in working condition. You should expect the repair or replacement to take approximately 30 days. How long is the limited warranty period?
The limited warranty period for the Product extends for ONE (1) YEAR from the date of purchase. If VTech repairs or replaces a Materially Defective Product under the terms of this limited warranty, this limited warranty also applies to the repaired or replacement Product for a period of either (a) 90 days from the date the repaired or replacement Product is shipped to you or (b) the time remaining on the original one-
year warranty; whichever is longer. What is not covered by this limited warranty?
This limited warranty does not cover:
1. Product that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water or other liquid intrusion; or 2. Product that has been damaged due to repair, alteration or modification by anyone other than an authorized service representative of VTech; or 3. Product to the extent that the problem experienced is caused by signal conditions, network reliability, or cable or antenna systems; or 37 Appendix Limited warranty (continued) 4. Product to the extent that the problem is caused by use with non-
VTech accessories; or 5. Product whose warranty/quality stickers, product serial number plates or electronic serial numbers have been removed, altered or rendered illegible; or 6. Product purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for commercial or institutional purposes (including but not limited to Products used for rental purposes); or 7. Product returned without a valid proof of purchase (see item 2 below); or 8. Charges for installation or set up, adjustment of customer controls, and installation or repair of systems outside the unit. How do you get warranty service?
To obtain warranty service in the United States of America, visit www.vtechbabymonitors.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377. NOTE: Before calling for service, please review the users manual - a check of the Products controls and features may save you a service call. Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the Product(s) to the service location. VTech will return repaired or replaced Product under this limited warranty. Transportation, delivery or handling charges are prepaid. VTech assumes no risk for damage or loss of the Product in transit. If the Product failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, VTech will notify you and will request that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for the repair of Products that are not covered by this limited warranty. What must you return with the Product to get warranty service?
1. Return the entire original package and contents including the Product to the VTech service location along with a description of the malfunction or difficulty; and Include a valid proof of purchase (sales receipt) identifying the Product purchased (Product model) and the date of purchase or receipt; and Provide your name, complete and correct mailing address, and telephone number. 2. 3. 38 Appendix Limited warranty (continued) Other limitations This warranty is the complete and exclusive agreement between you and VTech. It supersedes all other written or oral communications related to this Product. VTech provides no other warranties for this Product. The warranty exclusively describes all of VTechs responsibilities regarding the Product. There are no other express warranties. No one is authorized to make modifications to this limited warranty and you should not rely on any such modification. State/Provincial Law Rights: This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state or province to province. Limitations: Implied warranties, including those of fitness for a particular purpose and merchantability (an unwritten warranty that the Product is fit for ordinary use) are limited to one year from the date of purchase. Some states/provinces do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event shall VTech be liable for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost profits or revenue, inability to use the Product or other associated equipment, the cost of substitute equipment, and claims by third parties) resulting from the use of this Product. Some states/provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Please retain your original sales receipt as proof of purchase. 39 Appendix FCC and IC regulations FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The baby unit shall be installed and used such that parts of the babys body are maintained at a distance of approximately 20 cm (8 inches) or more. This Class B digital apparatus complies with Canadian ICES-003. 40 Appendix FCC and IC regulations (continued) Industry Canada Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference, including interference that may cause undesired operation. The term IC: before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications. RF radiation exposure statement Baby unit complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. Baby unit should be installed and operated with a minimum distance of 20 cm (8 inches) between the baby unit and the babys body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies also with Industry Canada RSS-102 with respect to Canadas Health Code 6 for Exposure of Humans to RF Fields. 41 Appendix Technical specifications Frequency Control Transmit frequency Channels Crystal controlled PLL synthesizer Baby unit: 2402 - 2478.5 MHz Parent unit: 2402 -2478.5 MHz 52 Nominal effective range Maximum power allowed by FCC and IC. Actual operating range might vary according to environmental conditions at the time of use. Power requirements Baby unit: 4 x AA Alkaline batteries Parent unit: 3.7V Li-polymer battery Baby unit power adapter:
Input: 100-120V AC 50/60Hz Output: 6V DC @ 800mA Parent unit power adapter:
Input: 100-120V AC 50/60Hz Output: 6V DC @ 800mA 42 Index A Add a baby unit 29 Add or replace a baby unit 29 Alert tone 18 B Baby unit battery installation 9 Baby unit default settings 15 Baby unit installation 7 Baby unit lights 3 Baby unit operation 24 Baby unit overview 2 Battery 28 Battery charging 13 Battery installation 9, 11 Brightness 22 C Cautions v Charging 13 D Default settings 15, 16 Deregister a baby unit 23, 30 Display screen icon 6 Display screen messages 27 E Electromagnetic Fields (EMF) v Expand your baby monitor system 29 F FCC and IC regulations 40 I Important safety instructions ii, iii Installation 7, 8, 9, 11 L Language 23 Layout 2, 4 LCD brightness 22 LCD language 23 LCD sleep mode 21 Lights 3, 5 Limited warranty 37 Low battery tone alert 18 Lullaby 21 Lullaby auto play 21 Lullaby playback on the baby unit 24 Lullaby playback volume 24 M Maintenance 35 Maximum temperature 20 Minimum temperature 20 All-CAM view mode 25 N Night vision 24, 26 Noise sensitivity 19 No link alert 19 O Operating range 14, 35 Operation 24, 25 43 Index P Pair/Unpair 22 Pair a baby unit 22 Pair a new baby unit 29 Parent unit battery 28 Parent unit battery charging 13 Parent unit battery installation 11 Parent unit default settings 16 Parent unit display screen icon 6 Parent unit display screen messages 27 Parent unit installation 8 Parent unit lights 5 Parent unit operation 25 Parent unit overview 4 Parent unit settings 18 Parts checklist 1 Positioning the baby monitor 14 Power off the baby unit 24 Power off the parent unit 25 Power on the baby unit 24 Power on the parent unit 25 Product introduction i R Range 14, 35 Register a baby unit 22 Remove a baby unit 23, 30 Replace a baby unit 29 S Safety instructions ii, iii Screen messages 27 Self-adhesive strap 7, 8 Sensitivity 19 Settings 18 Single-CAM view mode 25 Sound sensitivity 19 Speakerphone volume 18, 24, 25 Strap 7, 8 T Talk to the baby unit 26 Technical specifications 42 Temperature 20 Temperature alert 20 Temperature scale 21 Test your baby monitor before use 15 Troubleshooting 31 Turn off the baby unit 24 Turn off the parent unit 25 Turn on the baby unit 24 Turn on the parent unit 25 U Unpair a baby unit 23, 30 V View 26 Volume 18, 24, 25 VOX mode 21 W Warning iv Warranty 37 Z Zoom 25 44 VTECH TELECOMMUNICATIONS LTD. A member of THE VTECH GROUP OF COMPANIES. Distributed in the U.S.A. by VTech Communications,Inc., Beaverton, Oregon 97008. Distributed in Canada by VTech Technologies Canada Ltd., Richmond, B.C. V6W 1L5. Copyright 2011 for VTECH TELECOMMUNICATIONS LTD. VTech is the registered trademark of VTech Holdings Limited. Printed in China. 91-004422-010-100
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2011-06-16 | 2402 ~ 2478.5 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2011-06-16
|
||||
1 | Applicant's complete, legal business name |
VTech Telecommunications Ltd
|
||||
1 | FCC Registration Number (FRN) |
0015973951
|
||||
1 | Physical Address |
23/F Tai Ping Ind Center Block 1
|
||||
1 |
Tai Po NT, N/A
|
|||||
1 |
Hong Kong
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
T******@intertek.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
EW7
|
||||
1 | Equipment Product Code |
80-8181-00
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
M****** T******
|
||||
1 | Title |
Approbation Supervisor
|
||||
1 | Telephone Number |
852-2********
|
||||
1 | Fax Number |
852-2********
|
||||
1 |
m******@vtech.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Intertek Testing Services Hong Kong Ltd
|
||||
1 | Name |
M****** N********
|
||||
1 | Physical Address |
Flat D 5/F Garment Centre
|
||||
1 |
Kowloon
|
|||||
1 |
Hong Kong
|
|||||
1 | Telephone Number |
2173-******** Extension:
|
||||
1 | Fax Number |
2741-********
|
||||
1 |
m******@intertek.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
Intertek Testing Services Hong Kong Ltd
|
||||
1 | Name |
M******** N****
|
||||
1 | Physical Address |
Flat D 5/F Garment Centre
|
||||
1 |
Kowloon
|
|||||
1 |
Hong Kong
|
|||||
1 | Telephone Number |
2173-******** Extension:
|
||||
1 | Fax Number |
2741-********
|
||||
1 |
m******@intertek.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Video Baby Monitor - Baby Unit | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | Yes | ||||
1 | Grant Comments | Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Intertek Testing Services Hong Kong Ltd.
|
||||
1 | Name |
J******** H****
|
||||
1 | Telephone Number |
85221********
|
||||
1 | Fax Number |
85278********
|
||||
1 |
j******@intertek.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2478.50000000 | 0.0720000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC