FCC ID: EW780-2671-00 Video Monitor

High Definition High Definition Pan & Tilt Camera Pan & Tilt Camera LF1911 Whats Included Download LeapFrog Baby Care App Mount the Camera (Optional) Start monitoring from anywhere. Parent Guide Scan the QR code to download the free LeapFrog Baby Care mobile app, or search LeapFrog Baby Care on Apple App Store or Google Play Store. Notes:

Check for reception strength and the camera viewing angle before drilling the holes. The types of screws and anchors you need depend on the composition of the wall. You may need to purchase the screws and anchors separately to mount your camera. 21. Children should be supervised to ensure that they do not play with the product. 22. The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. SAVE THESE INSTRUCTIONS Cautions 1. Use and store the product at a temperature between 32oF

(0oC) and 104oF (40oC). 2. Do not expose the product to extreme cold, heat or direct sunlight. Do not put the product close to a heating source. 3. WarningStrangulation HazardChildren have STRANGLED in cords. Keep this cord out of the reach of children (more than 3 ft (0.9m) away). Do not remove this tag. 4. Never place the camera(s) inside the babys crib or playpen. Never cover the camera(s) with anything such as a towel or a blanket. 5. Other electronic products may cause interference with your camera. Try installing your camera as far away from these electronic devices as possible: wireless routers, radios, cellular telephones, intercoms, room monitors, televisions, personal computers, kitchen appliances and cordless telephones. Precautions for users of implanted cardiac pacemakers Cardiac pacemakers (applies only to digital cordless devices):

Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless devices and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that:

Pacemaker patients Should keep wireless devices at least six inches from the pacemaker. Should NOT place wireless devices directly over the pacemaker, such as in a breast pocket, when it is turned ON. WTRs evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless devices. Electromagnetic fields (EMF) This LeapFrog product complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this users manual, the product is safe to be used based on scientific evidence available today. Important Safety Instructions The applied nameplate is located at the bottom of the cameras base. When using your equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following:

1. Follow all warnings and instructions marked on the product. 2. Adult setup is required. 3. CAUTION: Do not install the camera at a height above 2 meters. 4. This product is not a substitute for adult supervision of the infant. Supervising the infant is the parents or caregivers responsibility. This product could cease operating, and therefore you should not assume it will continue working properly for any given period of time. Further, this is not a medical device and should not be used as such. This product is intended to assist you in supervising your baby. 5. Do not use this product near water. For example, do not use it next to a bath tub, wash bowl, kitchen sink, laundry tub or swimming pool, or in a wet basement or shower. 6. Use only the adapters included with this product. Incorrect adapter polarity or voltage can seriously damage the product. Power adapter information:

Camera Output: 5V DC 1.5A;

VTech Telecommunications Ltd.; Model: VT07EUS05150 7. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-

table or cabinet outlet. 8. For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible. 9. Unplug this product from the wall outlet before cleaning. 10. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Do not cut off the power adapters to replace them with other plugs, as this causes a hazardous situation. 11. Do not allow anything to rest on the power cords. Do not install this product where the cords may be walked on or crimped. 12. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult your dealer or local power company. 13. Do not overload wall outlets or use an extension cord. 14. Do not place this product on an unstable table, shelf, stand or other unstable surfaces. 15. This product should not be placed in any area where proper ventilation is not provided. Slots and openings in the back or bottom of this product are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat register. 16. Never push objects of any kind into this product through the slots because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product. 17. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the product other than specified access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used. 18. You should test the sound reception every time you turn on the units or move one of the components. 19. Periodically examine all components for damage. 20. There is a very low risk of privacy loss when using certain electronic devices, such as cameras, cordless telephones, etc. To protect your privacy, make sure the product has never been used before purchase, reset the camera periodically by powering off and then powering on the units, and power off the camera if you will not use it for some time. Parent Guide This guide contains important information. Please keep it for future reference. Need help?

Visit leapfrog.com/support Visit our website leapfrog.com leapfrog.com for more information about products, downloads, resources and more. Read our complete warranty policy online at leapfrog.com/warranty. Scan the QR code to enter our Online Manual:

Or go to leapfrog.zendesk.com/hc Touch a nd learn!

Touch a nd learn!

CONFORMS TO UL STD. 62368-1 CERTIFIED TO CSA STD. C22.2 NO.62368-1 x 2 x 2 1 set for LF1911 Connect and Power On the Camera 1. Connect the Camera If the camera is connected to a switch controlled electric outlet, make sure the switch is on. Notes:

Use only the power adapter supplied with this product. Connect the power adapters in a vertical or floor mount position only. The adapters prongs are not designed to hold the weight of the camera, so do not connect them to any ceiling, under-the-table, or cabinet outlets. Otherwise, the adapters may not properly connect to the outlets. Make sure the camera and the power adapter cords are out of reach of children. To maintain compliance with the FCCs RF exposure guidelines, place the camera at least 20cm from nearby persons. App Compatibility AndroidTM 6.0 or later iOS 12 or later. 1. Place the wall mount bracket on a wall and then use a pencil to mark the top and the bottom holes as shown. Remove the wall mount bracket and drill two holes in the wall (7/32 inch drill bit). 2. If you drill the holes into a stud, go to step 3. If you drill the holes into an object other than a stud, insert the wall anchors into the holes. Tap gently on the ends with a hammer until the wall anchors are flush with the wall. 3. Insert the screws into the holes and tighten the screws until only 1/4 inch of the screws are exposed. 4. Place the camera on the wall mount bracket. Insert the mounting studs into the wall mount holes. Then, slide the camera forwards until it locks securely. Align the holes on the wall mount bracket with the screws on the wall, and slide the wall mount bracket down until it locks into place. 1 2 After installing the LeapFrog Baby Care App... Sign up for an account Pair the camera with your mobile device Monitor your baby using a wide range of features Pair the Camera with your Mobile Device On LeapFrog Baby Care App Before you start... Connect your mobile device to a 2.4GHz Wi-Fi network for a better connection and smoother video streaming. Enable the Location Service of your mobile device for the purpose of camera setup. With a Wi-Fi network and enabled Location Service... You can start to pair the camera with your own mobile device following the instructions in the app. Upon the successful pairing, you can hear and watch your baby via your mobile device. n o i t a l u g n a r t S d r a z a H

. n e r d l i h c f o h c a e r f o t u o d r o c s i h t p e e K t e e f e e r h t t s a e l t a e b o t s d e e n d r o c e h T t o n o D

. s e m i t l l a t a d l i h c e h t m o r f y a w a t o n o D

. d r o c n o i s n e t x e n a h t i w e s u

. g a t s i h t e v o m e r e u q s i R t n e m e l g n a r t d i s i o r t s n o m u a r e v u o r t e s t i o d n o d r o c

. s p m e t t u o t n e

, e c t e t n a f n e n u d s d e p i s a p z e r i t e r e N

. e g n o l l a r e d s a p z e s i l i t u N e L

. s t n a f n e s e d n o d r o c e c z e n g o l i

. e t t e u q i t e t t e c e d o g s e i R n i c a l u g n a r t s e e c n a c l a a l l e d a r e u f e b a c e t s e a g n e t n a M r o p r a t s e e b e d e b a c e t s E l

. s o n s o i l e d e c n a c l a a l i e d a r e u f s e p s e r t s o n e m o l e s u o l o N

. o t n e m o m o d o t n e o n i l e d e t i u q o N

. a c i r b m a n l i n i s n e t x e a n u n o c

. a t e u q i t e a t s e Tips:

Move the camera and the Wi-Fi router closer to each other in order to strengthen the network signal. It takes up around 1 minute to search the camera. 2. Power On or Off the Camera Position the Camera 1

> 3ft (1m) 2 Slide the ON/OFF switch to to power on your camera. Note:

POWER LED Light is OFF by default. Tip:

You can find the wall mounting tutorial video and step-by-step guide by visiting our Online Manual. Pan and Tilt your camera viewing up to 110 degrees. 5. You can maximize your camera viewing angles by tilting the wall mount bracket. Hold the camera, and then rotate the knob in an anti-clockwise direction. This will loosen the joint of the wall mount bracket. Tilt your camera up or down to adjust to your preferred angle. Then, rotate the knob in a clockwise direction to tighten the joint and secure the angle. How the system works ?

Protect Your Privacy and Online Security Online Manual Your home Wi-Fi network provides Internet connection to your camera so that you can monitor and control your camera whenever you are through the LeapFrog Baby Care App. Your Wi-Fi router (not included) provides the Internet connectivity, which serves as a communicating channel. LeapFrog cares about your privacy and peace of mind. Thats why weve put together a list of industry-

recommended best practices to help keep your wireless connection private and your devices protected when online. Ensure your wireless connection is secure Before installing a device, ensure your routers wireless signal is encrypted by selecting the WPA2-PSK with AES setting in your routers wireless security menu. 1 2 3 4 5 1 2 3 4 5 Overview Camera 6 7 8 1 2 3 4 5 1 2 3 5 6 Light sensor Camera 4 Microphone Night light Infrared LEDs Parking Mode Night Light 9 9 6 9 7 8 10 6 7 8 Night light control key Tap to turn the night light on or off. Tap and hold to adjust night light brightness level. 12 13 12 12 13 13 10 10 11 11 11 7 8 9 11 12 POWER LED Light ON / OFF switch Speaker 10 Temperature sensor Power jack PAIR key Press and hold to pair the camera with your mobile devices. 13 Wall mount holes Designed for extra peace of mind, turn on Parking Mode for a moment of privacy. When the Parking Mode is turned on, several functions of the camera like audio transmission and video monitoring will be disabled. In Parking Mode, motion recording, motion detection, and sound detection will be temporarily unavailable. Want a softer hue from the cameras night light to relax your little one? You can control the brightness of its glow remotely from the LeapFrog Baby Care App, or directly on the Baby Unit. Adjust the night light on the Camera Tap the Night light control key to turn on/off the night light. located on the top of the camera Tap and hold the Night light control key to adjust the night lights brightness. It changes level by level at a time. Note:

If Auto Brightness has been pre-selected, any adjustment in night light brightness will automatically turn off Auto Brightness mode and switch to the fixed level of brightness. or Mobile access Wi-Fi connection Test the Location for the Camera If you plan to install your camera to a designated location, and will use your home Wi-Fi network to connect your mobile device, test whether your selected monitoring areas have good Wi-Fi signal strength. Adjust the direction and distance between your camera, mobile device and Wi-Fi router until you have identified a suitable location with good connection. Note:

Depending on surroundings and obstructing factors, such as the effect distance and internal walls have on signal strength, you may experience reduced Wi-Fi signal. Change default settings Change your wireless routers default wireless network name (SSID) to something unique. Change default passwords to unique, strong passwords. A strong password:

- Is at least 10 characters long.

- Does not contain dictionary words or personal information.

- Contains a mix of uppercase letters, lowercase letters, special characters and numbers. Keep your devices up to date Download security patches from manufacturers as soon as they become available. This will ensure you always have the latest security updates. If the feature is available, enable automatic updates for future releases. Disable Universal Plug and Play (UPnP) on your router UPnP enabled on a router can limit the effectiveness of your firewall by allowing other network devices to open inbound ports without any intervention or approval from you. A virus or other malware program could use this function to compromise security for the entire network. For more information on wireless connections and protecting your data, please review the following resources from industry experts:

1. Federal Communications Commission: Wireless Connections and Bluetooth Security Tips www.fcc.gov/consumers/guides/how-protect-yourself-online. 2. U.S. Department of Homeland Security: Before You Connect a New Computer to the Internet www.us-cert.gov/ncas/tips/ST15-003. 3. Federal Trade Commission: Using IP Cameras Safely https://www.consumer.ftc.gov/articles/0382-using-ip-cameras-safely. 4. Wi-Fi Alliance: Discover Wi-Fi Security http://www.wi-fi.org/discover-wi-fi/security. Disclaimer and Limitation of Liability LeapFrog and its suppliers assume no responsibility for any damage or loss resulting from the use of this handbook. LeapFrog and its suppliers assume no responsibility for any loss or claims by third parties that may arise through the use of this software. LeapFrog and its suppliers assume no responsibility for any damage or loss caused by deletion of data as a result of malfunction, dead battery, or repairs. Be sure to make backup copies of important data on other media to protect against data loss. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. CAN ICES-3 (B)/NMB-3(B) Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Warranty: Please visit our website at leapfrog.com for full details of the warranty provided in your country. FCC and IC regulations FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission

(FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which Increase the separation between the equipment and receiver. the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. For cETL compliance only Mesures de scurit importantes La plaque signaltique applique est situe au bas du socle de lunit du bb. Lorsque vous utilisez votre appareil, vous devriez toujours suivre certaines mesures de prcaution de base afin de rduire les risques dincendie, dlectrocution et de blessures corporelles, dont ceux qui suivent :

1. Observez toutes les instructions et mises en garde inscrites sur lappareil. 2. Linstallation par un adulte est requise. 3. MISE EN GARDE: Ninstallez pas lunit du bb une hauteur suprieure 2 mtres. 4. Ce produit ne remplace pas la surveillance adulte du nourrisson. La supervision du nourrisson est la responsabilit du parent ou de la personne qui soccupe de lenfant. Ce produit pourrait cesser de fonctionner et, par consquent, vous ne devriez pas prsumer quil continuera de fonctionner cor-

rectement pendant une priode de temps donne. De plus, il ne sagit pas dun instrument mdical et ne devrait pas tre utilis comme tel. Ce produit est destin vous aider superviser votre bb. 5. Nutilisez pas cet appareil prs de leau ni de toute autre source dhumidit, par exemple, prs dune baignoire, cuve lessive, vier de cuisine, dans un sous-sol humide ni prs dune piscine, dans un soussol humide ou une douche. 6. MISE EN GARDE: Utilisez uniquement la pile fournie. Un risque dexplosion pourrait survenir si un mauvais type de pile est utilis pour lunit du parent. La pile ne peut pas tre soumise des tempratures extrmes leves ou basses et une faible pression dair haute altitude pendant lutilisation, lentreposage ou le transport. Llimination de la pile dans le feu ou dans un four chaud, ou lcrasement ou le dcoupage mcanique de la pile peuvent entraner une explosion. Laisser la pile dans un environnement temprature extrmement leve peut entraner une explosion ou la fuite dun liquide ou dun gaz inflammable. Une pile soumise une pression dair extrmement basse peut provoquer une explosion ou une fuite de liquide ou de gaz inflammable. liminer la pile usage conformment aux informations du Sceau RBRC. 7. Nutilisez que les adaptateurs inclus avec ce produit. Lutilisation dun adaptateur dont la polarit ou la tension serait inadquate risque dendommager srieusement le produit et mettre votre scurit en pril. Informations sur les adaptateurs lectriques :

Adaptateur de lunit du parent : Sortie : 5V DC 2A VTech Telecommunications Ltd. Modle: VT07EUS05200 Adaptateur de lunit du bb : Sortie : 5V DC 1.5A VTech Telecommunications Ltd. Modle: VT05EUS05150 Informations sur les piles rechargeables :

Zhuhai Great Power Energy Co., Ltd. Lithium battery, 3.7V 5000mAh;

Modle: GSP806090-5Ah-3.7V-1S1P 8. Lorsquils sont branchs dans une prise de courant, les adaptateurs secteur ont t conus pour tre orients correctement, soit la verticale ou au plancher. Les broches nont pas t conues pour supporter le poids du bloc dalimentation et le maintenir en place si celuici est branch dans une prise au plafond, sous une table ou dans un meuble. 9. Pour les PRODUITS BRANCHER UNE PRISE DE COURANT, la prise de courant doit tre installe prs du produit, afin dassurer une accessibilit scuritaire la prise de courant. 10. Dbranchez ce produit de la prise de courant avant de procder au nettoyage. Nutilisez pas de nettoyants en arosols. Utilisez un chiffon humide pour le nettoyer. 11. Ne coupez pas les cordons dalimentation pour remplacer les fiches, car ceci peut prsenter un danger potentiel. 12. Ne laissez aucun objet reposer ni appuyer sur le cordon dalimentation. Ninstallez pas cet appareil dans un endroit o lon risque dcraser le cordon dalimentation ou de le pitiner. 13. Ne faites fonctionner cet appareil quavec le type dalimentation indiqu sur ltiquette. Si vous ne connaissez pas le type dalimentation que vous possdez votre domicile, consultez votre marchand ou votre compagnie locale dlectricit. 14. Ne surchargez pas les prises de courant murales ni les rallonges lectriques. 15. Ne placez pas cet appareil sur un chariot, meuble, trpied, support de montage ni table chancelants. 16. Les trous et ouvertures du botier, situs larrire de lappareil ou sous celui-ci, servent arer lappa-

reil. Pour lempcher de surchauffer, ne bloquez sous aucun prtexte ces ouvertures et nempchez To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The camera shall be installed and used such that parts of all persons body are maintained at a distance of approximately 8 in (20 cm) or more. This Class B digital apparatus complies with Canadian requirement: CAN ICES-3

(B)/NMB-3(B) Industry Canada This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. The term IC: before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. RF radiation exposure statement The product complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The camera should be installed and operated with a minimum distance of 8 in (20 cm) between the camera and all persons body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. This equipment complies also with Industry Canada RSS-102 with respect to Canadas Health Code 6 for Exposure of Humans to RF Fields. pas laration adquate de lappareil en le plaant sur un lit, divan, tapis ou toute autre surface similaire. De mme, ne le positionnez pas proximit ni au-dessus dune source de chaleur ou dun calorifre. De plus, ne placez pas lappareil dans un endroit avant de vous assurer quil y ait une bonne circulation dair. 17. Nenfoncez jamais dobjets travers les ouvertures de cet appareil, car ils pourraient entrer en contact avec des points de tension dangereux ou causer des courts-circuits qui peuvent dgnrer en incendies ou en risques dlectrocution. Ne renversez jamais de liquide dans ce produit. 18. Afin de rduire les risques dlectrocution, ne dmontez pas cet appareil, mais apportez-le dans un centre de service autoris. Louverture du botier ou le retrait de toutes pices que contient cet appareil, lexception de laccs autoris certaines portes ou ouvertures, risque de vous exposer des points de tension dangereux ou dautres dangers. Un remontage incorrect peut par la suite prsenter des risques dlectrocution. 19. Vous devriez tester la rception chaque fois que vous mettez lappareil en fonction. 20. Examinez les composantes afin de vrifier si celles-ci ne sont pas endommages. 21. Il existe un trs faible risque de perte de confidentialit avec certains appareils lectroniques

(autres coute-bbs, tlphones sans fils etc.). Pour lviter, sassurer que le produit na jamais t utilis avant lachat, rinitialiser lunit de faon priodique, teindre lcoute-bb quand il nest pas en cours dutilisation. 22. Les enfants devraient tre superviss afin de vous assurer quils ne jouent pas avec lappareil. 23. Le produit nest pas conu pour tre utilis par des personnes (incluant des enfants) aux capacits physiques, sensorielles ou mentales rduites ou qui manquent dexprience et de connaissances, moins quon leur ait donn suffisamment de supervision ou dinstructions relativement lutilisation de lappareil par une personne responsable de leur scurit. CONSERVEZ CES INSTRUCTIONS Mises en garde 1. Utilisez et entreposez le produit une temprature entre 0 C (32F) et 40C (104 F). 2. Nexposez pas cet appareil des froids ou des chaleurs extrmes, ainsi qu la lumire directe du soleil. Ne linstallez pas prs dune source de chauffage. 3. Le bloc-piles ne doit pas tre expos la chaleur excessive telle que la lumire du soleil ou au feu0. 4. Avertissement - Risque de strangulation - Les enfants se sont TRANGLS dans des cordons. Gardez ce cordon hors de porte des enfants ( plus de 0,9 m). Nenlevez pas cette tiquette. 5. Ne jamais placer le moniteur lintrieur du berceau ou du parc de bb. Ne jamais couvrir le moniteur ou lunit (s) portative avec un article tel une serviette ou une couverture. 6. Dautres quipements lectroniques peuvent produire des interfrences sur votre moniteur vido et audio. Tentez dinstaller votre moniteur vido ou audio lcart des appareils lectroniques tels que des routeurs sans fil, radios, tlphones cellulaires, interphones, moniteurs, tlphones, ordinateurs personnels, lectromnagers et tlphones sans fil. Stimulateurs cardiaques implants dans lorganisme Les simulateurs cardiaques (ne sapplique quaux dispositifs numriques sans fil) :

Lorganisme Wireless Technology Research, LLC (WTR), une firme de recherche indpendante, a men une valuation pluridisciplinaire des interfrences entre les tlphones sans fil portatifs et les stimulateurs cardiaques implants dans lorganisme. Appuye par lAdministration des aliments et drogues (FDA) des tats-Unis, la firme WTR recommande aux mdecins:

Avis aux dtenteurs de stimulateurs cardiaques Vous devriez maintenir les dispositifs sans fil au moins six pouces du simulateur cardiaque. Ils ne doivent PAS placer le tlphone sans fil directement sur le stimulateur cardiaque, tel que dans une poche de chemise, lorsque celui-ci est en marche. Ltude effectue par lorganisme WRS na pas identifi de risque pour les dtenteurs de simulateurs cardiaques causs par les gens qui utilisent dispositifs sans fil proximit de ceux-ci. Champs lectromagntiques (EMF) Ce produit de LeapFrog est conforme toutes les normes se rapportant aux champs lectromagntiques (EMF) standard. Si vous le manipulez correctement en suivant les instructions de ce guide, son utilisation sera scuritaire pendant de nombreuses annes, selon les meilleures vidences scientifiques dont nous disposons aujourdhui. Find the answer to your question on our knowledge-rich Online Manual. Get assisted at your own pace and learn what your monitor is capable of. Scan the QR code to access the Online Manual or visit leapfrog.zendesk.com/hc Full Manual Video Tutorials FAQs & Troubleshooting Comprehensive help articles on product set up, operations, Wi-Fi and settings. Walk-throughs on features and installation such as mounting the Camera on the wall. Answers to the most commonly asked questions, including troubleshooting solutions. Warranty Please visit our website at leapfrog.com for full details of the warranty provided in your country. Customer Support Visit our Consumer Support website 24 hours a day at:

United States:

leapfrog.com/support Canada:

leapfrog.ca/support Call our Customer Service number from Monday to Friday 9am - 6pm Central Time:

United States & Canada:

1 (800) 701-5327 Technical Specifications Technology Channels Wi-Fi 2.4GHz 802.11 b/g/n 1-11 (2412 - 2462 MHz) Internet Connection Minimum Requirement: 1.5 Mbps @ 720p or 2.5 Mbps @ 1080p upload bandwidth per camera Nominal effective range Maximum power allowed by FCC and IC. Actual operating range may vary according to environmental conditions at the time of use. Power requirements Camera unit power adapter: Output: 5V DC @ 1.5A Credits:

The Background Noise sound file was created by Caroline Ford, and is used under the Creative Commons license. The Stream Noise sound file was created by Caroline Ford, and is used under the Creative Commons license. The Crickets At Night sound file was created by Mike Koenig, and is used under the Creative Commons license. The Heart Beat sound file was created by Zarabadeu, and is used under the Creative Commons license. Specifications are subject to change without notice. 2021 LeapFrog Enterprises, Inc. a subsidiary of VTech Holdings Limited. All rights reserved. 11/21. LF1911_QSG_V1

Model: LF1911 S/N: XXXXXXXXXXX WIFI MAC: AABBCCDDEEFF FCC ID: EW780-2671-00 IC: 1135B-80267100 HVIN: 35-400394BU A/V I.C.T.E. Model: LF1911 Model: LF1911 S/N: XXXXXXXXXXX WIFI MAC: AABBCCDDEEFF S/N: XXXXXXXXXXX FCC ID: EW780-2671-00 IC: 1135B-80267100 HVIN: 35-400394BU WIFI MAC: AABBCCDDEEFF A/V I.C.T.E. LF1911 BU LBL SIZE : 62.5 x 20 mm MATERIIAL: 50# PET

VTech Telecommunications Ltd Feb 8, 2022 To whom it may concern, Request for Permanent Confidentiality Under FCC Part 15 Certification FCC ID: EW780-2671-00 Request is hereby submitted by VTech Telecommunications Ltd. to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential and VTech Telecommunications Ltd. reserves the right to discern which parties can obtain access to these information:

Schematics Detailed Block diagrams Detailed Operational/Functional Description The rationale for request for confidentiality is as followings:

This information represents intellectual property of VTech Telecommunications Ltd. and it is subject to competition. We have invested considerable time and materials in research and development to produce the referenced product. Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. If you have questions or need further information, please contact the undersigned. Regards, Michael Tsui Approbation Supervisor

VTech Telecommunications Ltd Appendix B1 Letter of Agency for FCC Certification Sep. 27, 2017 To whom it may concern, Letter of Agency I, an officer of VTech Telecommunications Ltd do hereby authorize Intertek Testing Services (Terry Chan/ Koo Wai Ip/ Kenneth Wong/ Jess Tang) to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under Part 15 and/or Part 95 of the FCC Rules until further notice. I further certify that no party (as defined in 1.2002(b) of CFR 47, 2004) to this application, including myself, is subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C., 862. Regards, Michael Tsui Approbation Supervisor