FCC ID: EW780-2357-00A Video Monitor - Baby Unit

Go to www.vtechphones.com to register your product for enhanced warranty support and the latest VTech product news. VM818HD Full Color HD Video Monitor Quick start guide For more support information S m VM818HD 04/21. VM818-XHD_QSG_V1. 2021 VTech Communications, Inc. All rights reserved. Specications are subject to change without notice. C22.2 NO.62368-1 CSA STD. CERTIFIED TO 62368-1 UL STD. CONFORMS TO The Heart Beat sound le was created by Zarabadeu, and is used under the Creative Commons license. The Crickets At Night sound le was created by Mike Koenig, and is used under the Creative Commons license. The Stream Noise sound le was created by Caroline Ford, and is used under the Creative Commons license. The Background Noise sound le was created by Caroline Ford, and is used under the Creative Commons license. Credits:

Output: 5V DC @ 1A Baby unit and parent unit power adapters:

Parent unit: 3.8V 2100mAh Lithium-ion battery Power requirements may vary according to environmental conditions at the time of use. Nominal effective rangeMaximum power allowed by FCC and IC. Actual operating range

(IPS 1280x720 pixels) 5 Color LCD 32 LCD Channels Baby unit: 2405 - 2475 MHz Transmit frequency Technical specications Basic operation - Parent unit Adjust speaker volume Press -VOL / VOL+ to adjust your parent unit speaker volume. It determines the volume of sound transmitted from your baby unit. Zoom Press to zoom in or out. Muted 37 10:25 AM 37 10:25 AM Talk to your baby via the baby unit Turn on/off the parent unit screen 1. Press and hold the TALK key. 2. When the icon displays on screen, speak to your parent unit. Your voice is transmitted to the baby unit. You can turn on or off the parent unit screen without powering off the parent unit. You can still hear sound from the baby unit. 3. When nish talking, release Press POWER on the parent unit to the TALK key and hear your baby again. turn off the screen. Press any keys on the parent unit to turn on the screen again. 37 10:25 AM Press and hold Important safety instructions Whats in the box 1 Connect the baby monitor (Contd) 3 Positioning the baby monitor The applied nameplate is located at the bottom of the baby units base. When using your equipment, basic safety precautions should always be followed to reduce the risk of re, electric shock and injury, including the following:

1. Follow all warnings and instructions marked on the product. 2. Adult setup is required. 3. CAUTION: Do not install the baby unit at a height above 4. 2 meters. This product is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such. This product is not intended for use as a medical monitor . 5. 6. Do not use this product near water. For example, do not use it next to a bath tub, wash bowl, kitchen sink, laundry tub or swimming pool, or in a wet basement or shower. 7. CAUTION: Use only the battery provided. There may be a risk of explosion if a wrong type of battery is used for the parent unit. The battery cannot be subjected to high or low extreme temperature and low air pressure at high altitude during use, storage or transportation. Disposal of battery into re or a hot oven, or mechanically crushing or cutting or the battery can result in an explosion. Leaving the battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of ammable liquid of gas. Battery subjected to extremely low air pressure may result in an explosion or the leakage of ammable liquid or gas. Dispose of used battery according to the information in The RBRC seal. 8. Use only the adapters included with this product. Incorrect adapter polarity or voltage can seriously damage the product. 9. Power adapter information:

Parent unit output: 5V DC 1A VTech Telecommunications Ltd. Model: VT05EUS05100 Baby unit output: 5V DC 1A. VTech Telecommunications Ltd. Model: VT05EUS05100 Rechargeable battery information:

Li-ion battery, 3.8V 2100mAh Zhongshan Tianmao Battery Co., Ltd. Model Number: BP1763 The power adapters are intended to be correctly oriented in a vertical or oor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet. 10. For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible. 11. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 12. Do not cut off the power adapters to replace them with other plugs, as this causes a hazardous situation. 13. Do not allow anything to rest on the power cords. Do not install this product where the cords may be walked on or crimped. 14. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult your dealer or local power company. 15. Do not overload wall outlets or use an extension cord. 16. Do not place this product on an unstable table, shelf, stand or other unstable surfaces. 17. This product should not be placed in any area where proper ventilation is not provided. Slots and openings in the back or bottom of this product are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat register. 18. Never push objects of any kind into this product through the slots because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product. 19. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the product other than specied access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used. 20. You should test the sound reception every time you turn on the units or move one of the components. 21. Periodically examine all components for damage. 22. There is a very low risk of privacy loss when using certain electronic devices, such as baby monitors, cordless telephones, etc. To protect your privacy, make sure the product has never been used before purchase, reset the baby monitor periodically by powering off and then powering on the units, and power off the baby monitor if you will not use it for some time. 23. Children should be supervised to ensure that they do not play with the product. 24. The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. SAVE THESE INSTRUCTIONS Cautions 1. Use and store the product at a temperature between 32oF and 104oF. 2. Do not expose the product to extreme cold, heat or direct sunlight. Do not put the product close to a heating source. 3. Batteries should not be exposed to excessive heat such as bright sunshine or re. 4. WarningStrangulation Hazard Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3 ft (0.9m) away). Do not remove this tag. 5. Never place the baby unit(s) inside the babys crib or playpen. Never cover the baby unit(s) or parent unit with anything such as a towel or a blanket. 6. Other electronic products may cause interference with your baby monitor. Try installing your baby monitor as far away from these electronic devices as possible: wireless routers, radios, cellular telephones, intercoms, room monitors, televisions, personal computers, kitchen appliances and cordless telephones. Precautions for users of implanted cardiac pacemakers Cardiac pacemakers (applies only to digital cordless devices):

Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless devices and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that:

Pacemaker patients Should keep wireless devices at least six inches from the pacemaker. Should NOT place wireless devices directly over the pacemaker, such as in a breast pocket, when it is turned ON. WTRs evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless devices. Electromagnetic elds (EMF) This VTech product complies with all standards regarding electromagnetic elds (EMF). If handled properly and according to the instructions in this users manual, the product is safe to be used based on scientic evidence available today. Quick start guide x 2 x 2 e t i u e q e r e s c o c u o n p n a a c r N o l

. a l a o c c l a t s a N i r n a e a b i e e l l

. o e t m c d b n e d o a a l e e d e l a r d a r e e m n o i u u l u n f b m f g e a s i g s n l c o s b e e i d n a a t p o e t

. e a i r R t c s e E

. s t e n t r s s t t e x u e q e i a t s o n e e o a e g n n i t o i u a n e s n n s l o e o e m c e t n l o e d a l d M s a

. s p p z s i o e m r r t e i t t n e m e L

. s s t e n t r i u o e t m n a u o N t

. n e e e l u f a e g n n

, e e s r o c l l e t a s g e q n d v e u t r

. n o n e e d t i a o r a t f s e R r e n a u t d r t o c t i e d c d s e p q i n z t o u e d s i l i e t s t t z n e n o d u e c d e g r i N i o o p l c t t o

. e n n e e f r e d e t o o D n

. o l i r s h h e c f t m t D

. d o a o i t l l n o i t s r s d h e c c l a n t t a r a a a o e i l a u z g a n H r e s d f b l i n

. g o h e o t a t c t x t u s e e s a r t S o d h i n h d e r e o n t a t m h e c o t s d r i o v i r f w h o y m e t c a e p e s r w u e h a e T K 1 Connect the baby monitor NOTE NOTES The rechargeable battery in the parent unit is built-in. Use only the power adapters supplied with this product. Make sure the parent unit and the baby unit are not connected to the switch controlled electric outlets. Connect the power adapters in a vertical or oor mount position only. The adapters prongs are not designed to hold the weight of the parent unit and the baby unit, so do not connect them to any ceiling, under-the-table, or cabinet outlets. Otherwise, the adapters may not properly connect to the outlets. Make sure the parent unit, the baby unit and the power adapter cords are out of reach of children. To maintain compliance with the FCCs RF exposure guidelines, place the baby unit at least 20cm from nearby persons. Raise the parent unit antenna for better reception Caution Position the baby units temperature sensor horizontally for its optimal usage. Do not bend it upward. Charge the parent unit battery before use When you have connected and turned on the parent unit, the battery will be charged automatically. NONONotes

. Before using the baby monitor for the rst time, charge the parent unit battery for 12 hours. When the parent unit battery is fully charged, the battery icon becomes solid It takes longer to charge the battery when the parent unit is turned on. To shorten the charging time, turn the parent unit off while charging. The standby time varies depending on the sensitivity level you set, your actual use and the age of the battery.

> 3ft (1m) 3ft (1m)

< 3ft (1m) NONONote To avoid interference from other electronic devices, place your baby monitor at least 3 feet

(1 meter) away from devices such as wireless routers, microwaves, cell phones and computers. The battery icon indicates the battery status (see the following table). Battery indicators Battery status Action The screen displays light ashes. The

. The battery icon becomes solid

. The battery has very little charge and may be used for only a short time. The battery is fully charged. Charge without interruption (about 30 minutes). To keep the battery charged, connect it to AC power when not in use. 2 Power on or off the baby monitor

< 3ft (1m) Slide the ON/OFF switch leftward to power on your baby unit. After the parent unit is fully charged, press POWER until the welcoming screen appears.

> 3ft (1m) Caution The default volume of your parent unit is level 3, and the maximum volume is level 5. If you experience high-pitched screeching noise from your baby monitor while positioning:

- Make sure your baby unit and parent unit are more than 3 feet (1 meter) apart, OR

- Lower the volume of your parent unit. 4 Status check Once you power on both your baby unit and parent unit, your parent unit displays image from the baby unit, and the LINK LED light turns on. The green LED light of the baby unit turns on. Use the menu Press MENU to enter the menu, choose a menu item, or save a setting. You can use the parent unit for advanced settings or operations, such as to play or stop the baby unit lullaby, or to adjust the baby unit sound sensitivity. While in the menu:

Press

, menu options.

, or to scroll among the Press SELECT to select an item, or to save a setting. Press TALK to return to the live video. Press to go to the Help & info page. Overview - Parent unit 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Arrow keys Speaker MENU/SELECT Press to enter the main menu. While in a menu, press to choose an item, or save a setting.

- VOL/ VOL +

Increase or decrease parent units volume. Microphone 10 11 12 13 14 15 POWER / LCD ON/OFF Power jack RESET Force reboot the parent unit. Antenna Stand 1 2 3 4 5 LINK LED light LED light 3- level sound indicator light TALK /

Press and hold to talk to the baby unit. While in a submenu, press to exit. Press to zoom in/out. When in the main menu, press to go to the Help & Info page. 6 7 8 9 Overview - Baby unit 1 2 3 4 5 1 2 3 4 5 6 7 8 9 6 7 8 Infrared LEDs Camera lens Light sensor Microphone Night light Night light ON/OFF key LED indicator Power ON/OFF switch Speaker Antenna Power jack 10 11 Need help?

9 10 11 12 12 Temperature sensor Position the sensor horizontally for its optimal usage. Caution Do not bend the temperature sensor upward. Threaded socket for wall mounting 13 14 Pair button For operations and guides to help you using your video monitor, and for latest information and supports, go and check the online help topics and online FAQs. S m Use your smartphone or mobile device to access our online help. Go to https://help.vtechphones.com/vm818hd; OR Scan the QR code on the right. Launch the camera app or QR code scanner app on your smartphone or tablet. Hold the devices camera up to the QR code and frame it. Tap the notication to trigger the redirection of the online help.

If the QR code is not clearly displayed, adjust your cameras focus by moving your device closer or further away until it is clear. You can also call our Customer Support at 1 (800) 595-9511 [in US] or 1 (800) 267-7377 [in Canada] for help. VM818HD Parent unit icons Main menu icons Main menu Monitoring mode

(When paired with VM818-0HD only) 13 14 Melodies and soothing sounds Alerts - Sound, motion and temperature Baby unit 1 in Single mode Baby unit 2 in Single mode 1 2 Patrol mode Split mode Melodies and Soothing Sounds Select play all melodies, or play one of the ve melodies and four soothing sounds. Timer You can also set the timer to stop playing after 15, 30 or 60 minutes, or playing non-

stop. Sound Select sound Sensitivity level. Turn on/off Sound Detection Alert. Turn on/off Auto Wake Up function.

(See Sound Detection and Auto Wake Up section) Motion Turn on/off Motion Alert. Select motion Sensitivity level.

(See Motion Detection section) Main menu Temperature Turn on/off Temperature Alert. Set the parent unit to beep whenever the room temperature detected by the baby unit falls outside of the set temperature range. Select Minimum temperature for alert range. range. Select Maximum temperature for alert Select temperature Format. Set temperature display in Fahrenheit (oF) or Celsius (oC ). Parent unit settings Adjust parent unit screen Brightness. Turn on/off Dim Mode. Turn on/off Night Light. Turn on/off baby units Status LED. Adjust baby units speaker Volume. Alert icons Baby unit settings General settings Turn on/off Low Battery Alert Tone. Set the parent unit to beep when the battery is low. Turn on/off No Link Alert Tone. Set the parent unit to beep when the link between the parent unit and the baby unit is lost. Add Baby Unit Remove Baby Unit Status icons Current view status or The baby unit number that is being viewed when in:

- Single CAM mode.

- Patrol mode

(* When paired with VM818-0HD only).

- Split mode

(* When paired with VM818-0HD only). Split mode

(* When paired with VM818-0HD only) Patrol mode

(* When paired with VM818-0HD only) Night vision feature is activated automatically. Motion alert is turned on. Sound detection alert is turned on. Melodies or soothing sound are turned on. Night light is turned on. Parent unit speaker is muted. Temperature alert is turned on. Real-time temperature indicator Battery status indicator Displays when parent units battery is low and needs charging. Displays when motion is detected at a baby unit. Displays when sound is detected at a baby unit. Baby unit detects temperature exceeds the set maximum. Baby unit detects temperature is lower than the set minimum. Sound Detection and Auto Wake UP Motion Detection Dim mode Mount the baby unit on dry wall (optional) Adjust sound detection sensitivity Adjust motion detection sensitivity You can turn on Sound Detection Alert and adjust the Sound Sensitivity to detect sounds and turn on the parent unit while its screen is switched off or dimmed. When the baby unit detects sounds that exceed certain levels, the parent unit screen will turn on and the baby unit starts transmitting the sounds to the parent unit, and you can see and hear your baby. You can turn on Motion Alert and adjust the Motion Sensitivity to detect motions and turn on the parent unit while its screen is switched off or dimmed. When the baby units camera detects motions that exceed certain levels, the parent unit screen will turn on and the baby unit starts transmitting sounds to the parent unit, and you can see and hear your baby. If you have turned on Sound Detection Alert, the parent unit beeps when the baby unit detect sounds. If you have turned on Motion Alert, the parent unit beeps when the baby unit detects motions. Sound Sensitivity level Level 3

(Highest) Level 2

(Medium) Level 1

(Lowest) Motion Sensitivity level Level 3

(Highest) Level 2

(Medium) Level 1

(Lowest) The parent unit display will dim to conserve energy after 5 minutes of inactivity, in which there is neither key pressed nor alert received from the baby unit. NONONotes 5 minutes inactive Press any button Check for reception strength and baby units angle before drilling the holes. The types of screws and anchors you need depend on the composition of the wall. You may need to purchase the screws and anchors separately to mount your baby units. 1. Place the wall mount bracket on a wall and then use a pencil to mark the top and the bottom holes as shown. Remove the wall mount bracket and drill two holes in the wall (7/32 inch drill bit). 2. If you drill the holes into a stud, go to step 3. If you drill the holes into an object other than a stud, insert the wall anchors into the holes. Tap gently on the ends with a hammer until the wall anchors are ush with the wall. Description The parent unit screen and speaker turn on for very small sounds, including background noises from your babys room. The parent unit screen and speaker turns on for loud babbling and louder sounds from your baby. The parent unit remains quiet when your baby makes soft sounds. The parent unit screen and speaker turn on for loud crying or screeching sounds from your baby. The parent unit remains quiet when your baby makes soft sounds. Description The parent unit screen and speaker turn on for small motions, such as yawning or stretching. The parent unit screen and speaker turns on for normal daily motions, such as people walking around the house. The parent unit screen and speaker turn on for large motions, such as children are chasing or jumping around. Monitoring mode For pairing with VM818-0HD only 3. Align the wall mount bracket and screws with the holes in the wall as shown. Tighten the screw in the middle hole rst, so that the wall mount bracket position is xed. You can tighten the other screw in the top hole. 3. Insert the screws into the holes and tighten the screws until only 1/4 inch of the screws are exposed. Sound activated screen and audio - Auto Wake Up Night vision The baby unit has infrared LEDs that allow you to see your baby clearly at night or in a dark room. When the baby unit being viewed detects low light levels, the infrared LEDs are switched on automatically. The images from the baby unit are in black and white, and appears on the screen. from the ba It is normal to see a short white glare on your parent unit screen as the baby unit is adapting to the dark environment. When the infrared LEDs are on, it is normal for the images to be in black and white. Notes Tip Depending on the surroundings and other interfering factors, like lighting, objects, colors and backgrounds, the video quality may vary. Adjust the baby units angle or place the baby unit at a higher elevation to prevent glare and blurry displays. Change different views - Single CAM Select baby unit 1 view the image from the baby unit. or baby unit 2 to Change different views - Patrol 1 2 Select Patrol mode as your monitoring mode to alternately view the image from baby units 10 seconds. every and Change different views - Split 10s Select Split mode as your monitoring mode to view the images from both baby units at once. Note While in Split mode, you can press or to highlight the view of the baby unit 1 or baby unit 2

, and hear the sounds transmitted from the baby unit. 4. Place the baby unit on the wall mount bracket. Tighten the screw into the threaded socket at the bottom to secure the baby unit. OR 4. Place the baby unit on the wall mount bracket. Tighten the screw into the threaded socket at the bottom to secure the baby unit. Align the holes on the wall mount bracket with the screws on the wall, and slide the wall mount bracket down until it locks into place. 3 5. You can maximize your baby units viewing angles by tilting the wall mount bracket. Hold the baby unit, and then rotate the knob in anticlockwise direction. This will loosen the joint of the wall mount bracket. Tilt your baby unit up or down to adjust to your preferred angle. Then, rotate the knob in clockwise direction to tighten the joint and secure the angle. The parent unit screen stays off to save power when the baby unit does not detect sound. When Auto Wake Up is turned on, once the baby unit detects sounds that are louder than the chosen sound sensitivity level, the parent unit screen and speaker will turn on automatically. The parent unit then turns off again after 50 seconds of no sound detection. NONONotes If you have muted the parent unit speaker, only the parent unit screen will turn on when a sound is detected. If you have turned on Auto Wake Up but turned off Sound Detection Alert, the parent unit will wake up when the baby unit detects sounds that are louder than the chosen sound sensitivity level. Frequently asked questions Below are the questions most frequently asked about the baby monitor. Why does the baby monitor not respond normally?

Try the following (in the order listed) for common cure:

1. Disconnect the power to the baby units and the parent unit. 2. Wait a few seconds before connecting power back to the baby units and the parent unit. 3. Turn on the baby units and the parent unit. 4. Wait for the parent unit to synchronize with the baby units. Allow up to one minute for this to take place. The RBRC seal on the lithium-ion battery indicates that VTech Communications, Inc. is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful lives, when taken out of service within the United States and Canada. The program provides a convenient alternative to placing used lithium-ion batteries into the trash or municipal waste, which may be illegal in your area. VTechs participation makes it easy for you to drop off the spent battery at local retailers participating in the program or at authorized VTech product service centers. Please call 1 (800) 8 BATTERY for information on Li-ion battery recycling and disposal bans/restrictions in your area. VTechs involvement in this program is part of its commitment to protecting our environment and conserving natural resources. The RBRC Seal and 1 (800) 8 BATTERY are registered trademarks of Call2recycle, Inc. The RBRC seal For cETL compliance only Why dont the lights of the baby unit and parent unit go on when I switch on the units?

Why doesnt my parent unit charge while connected to AC power?

Perhaps the parent units battery is depleted. Insert the appliance plug into the parent unit and put the adapter in a wall socket. The parent unit will establish connection with the baby unit. FCC and IC regulations Perhaps the baby unit is not connected to the power. Insert the appliance plug into the baby unit and put the adapter in a wall socket. Then, slide the baby unit and to establish connection with the parent unit. ON/OFF to switch on the Make sure the power is not controlled by a wall switch. Why is my screen in black and white?

The screen is in black and white during night-time or in a dark room when the night vision feature is activated. This is normal. Why do I get glare or blurry display on my screen when viewing my baby at night?

During night-time or in a dark room, the surroundings and other interfering factors, like lightings, objects, colors and backgrounds may affect the image quality on your parent unit screen. Adjust the baby units angle or place the baby unit at a higher level to prevent glare and blurry display. Why does the baby monitor produce a high-pitched noise?

The parent unit and baby units may be too close to each other. Move the parent unit away from the baby units until the noise stops; OR Turn down the volume of your parent unit. Why does the parent unit beep?

The baby units may be out of range. Move the parent unit closer to the baby units (but not less than 3 feet). Why dont I hear a sound/

Why cant I hear my baby cry?

Why cant I establish a connection? Why is the connection lost every now and then? Why are there sound interruptions?

The parent unit may not have enough charge for the parent unit to perform normally. Charge the battery in the parent unit until the battery icon becomes solid

. The temperature of your babys room may be too high or too low. The parent unit speaker volume may be too low. Press VOL+ to increase the volume, or use the parent unit menu to change sound sensitivity level to the highest level. The baby units may be out of range. Move the parent unit closer to the baby units (but not less than 3 feet). Other electronic and wireless products may cause interference with your baby monitor. Try installing your baby monitor as far away from these devices as possible. If you power on only one baby unit, your parent unit may display Make sure baby unit X is on or move closer to baby unit X, and the LINK LED light ashes. Switch to the baby unit you have powered on via menu. FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modications to this equipment not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The baby unit shall be installed and used such that parts of all persons body are maintained at a distance of approximately 8 in (20 cm) or more. The transmitter and antenna of the parent unit shall be held at least 1 in (2.5 cm) from your face. This Class B digital apparatus complies with Canadian requirement:

CAN ICES-3 (B)/NMB-3(B) Industry Canada This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. The term IC: before the certication/registration number only signies that the Industry Canada technical specications were met. This product meets the applicable Innovation, Science and Economic Development Canada technical specications. RF radiation exposure statement The baby unit complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The baby unit should be installed and operated with a minimum distance of 8 in (20 cm) between the baby unit and all persons body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies also with Industry Canada RSS-102 with respect to Canadas Health Code 6 for Exposure of Humans to RF Fields. California Energy Commission battery charging testing mode This baby monitor meets the California Energy Commission (CEC) regulations for energy consumption. Your baby monitor is set up to comply with the energy-conserving standards right out of the box. Follow the instructions to install and charge the battery. The CEC battery charging testing mode is activated while charging. Even if the parent unit is paired to baby units, the CEC battery charging testing mode is activated while it is powered off and charging. Mesures de scurit importantes La plaque signaltique applique est situe au bas du socle de lunit du bb. Lorsque vous utilisez votre appareil, vous devriez toujours suivre certaines mesures de prcaution de base an de rduire les risques dincendie, dlectrocution et de blessures corporelles, dont ceux qui suivent :

1. Observez toutes les instructions et mises en garde inscrites sur lappareil. Linstallation par un adulte est requise. 2. 3. MISE EN GARDE: Ninstallez pas lunit du bb une hauteur suprieure 2 mtres. 4. Ce produit a t conu pour tre un dispositif dappoint seulement. Il nest pas le remplacement dune supervision responsable et adquate par un adulte et ne devrait pas tre utilis comme telle. 5. Ce produit nest pas conu pour tre utilis en tant que moniteur mdical. 6. Nutilisez pas cet appareil prs de leau ni de toute autre source dhumidit, par exemple, prs dune baignoire, cuve lessive, vier de cuisine, dans un sous-sol humide ni prs dune piscine, dans un soussol humide ou une douche. 7. MISE EN GARDE: Utilisez uniquement la pile fournie. Un risque dexplosion pourrait survenir si un mauvais type de pile est utilis pour lunit du parent. La pile ne peut pas tre soumise des tempratures extrmes leves ou basses et une faible pression dair haute altitude pendant lutilisation, lentreposage ou le transport. Llimination de la pile dans le feu ou dans un four chaud, ou lcrasement ou le dcoupage mcanique de la pile peuvent entraner une explosion. Laisser la pile dans un environnement temprature extrmement leve peut entraner une explosion ou la fuite dun liquide ou dun gaz inammable. Une pile soumise une pression dair extrmement basse peut provoquer une explosion ou une fuite de liquide ou de gaz inammable. liminer la pile usage conformment inammable. liminer la pile usage conformment aux informations du Sceau RBRC. 8. Nutilisez que les adaptateurs inclus avec ce produit. Lutilisation dun adaptateur dont la polarit ou la tension serait inadquate risque dendommager srieusement le produit et mettre votre scurit en pril. Informations sur les adaptateurs lectriques :

Sortie : 5 V CC 1000mA. VTech Telecommunications Ltd. Modle : VT05EUS05100 Informations sur les piles rechargeables :

9. 3.8V 2100mAh Lithium-ion ZhongShan Tianmao battery Co. Ltd. Modle : BP1763 Lorsquils sont branchs dans une prise de courant, les adaptateurs secteur ont t conus pour tre orients correctement, soit la verticale ou au plancher. Les broches nont pas t conues pour supporter le poids du bloc dalimentation et le maintenir en place si celuici est branch dans une prise au plafond, sous une table ou dans un meuble. 10. Pour les PRODUITS BRANCHER UNE PRISE DE COURANT, la prise de courant doit tre installe prs du produit, an dassurer une accessibilit scuritaire la prise de courant. 11. Dbranchez ce produit de la prise de courant avant de procder au nettoyage. Nutilisez pas de nettoyants en arosols. Utilisez un chiffon humide pour le nettoyer. 12. Dbranchez les cordons dalimentation avant de remplacer le bloc-piles. 13. Ne coupez pas les cordons dalimentation pour remplacer les ches, car ceci peut prsenter un danger potentiel. 14. Ne laissez aucun objet reposer ni appuyer sur le cordon dalimentation. Ninstallez pas cet appareil dans un endroit o lon risque dcraser le cordon dalimentation ou de le pitiner. 15. Ne faites fonctionner cet appareil quavec le type dalimentation indiqu sur ltiquette. Si vous ne connaissez pas le type dalimentation que vous possdez votre domicile, consultez votre marchand ou votre compagnie locale dlectricit. 16. Ne surchargez pas les prises de courant murales ni les rallonges lectriques. 17. Ne placez pas cet appareil sur un chariot, meuble, trpied, support de montage ni table chancelants. 18. Les trous et ouvertures du botier, situs larrire de lappareil ou sous celui-ci, servent arer lappareil. Pour lempcher de surchauffer, ne bloquez sous aucun prtexte ces ouvertures et nempchez pas laration adquate de lappareil en le plaant sur un lit, divan, tapis ou toute autre surface similaire. De mme, ne le positionnez pas proximit ni au-dessus dune source de chaleur ou dun calorifre. De plus, ne placez pas lappareil dans un endroit avant de vous assurer quil y ait une bonne circulation dair. 19. Nenfoncez jamais dobjets travers les ouvertures de cet appareil, car ils pourraient entrer en contact avec des points de tension dangereux ou causer des courts-

circuits qui peuvent dgnrer en incendies ou en risques dlectrocution. Ne renversez jamais de liquide dans ce produit. 20. An de rduire les risques dlectrocution, ne dmontez pas cet appareil, mais apportez-le dans un centre de service autoris. Louverture du botier ou le retrait de toutes pices que contient cet appareil, lexception de laccs autoris certaines portes ou ouvertures, risque de vous exposer des points de tension dangereux ou dautres dangers. Un remontage incorrect peut par la suite prsenter des risques dlectrocution. 21. Vous devriez tester la rception chaque fois que vous mettez lappareil en fonction. 23. 22. Examinez les composantes an de vrier si celles-ci ne sont pas endommages. Il existe un trs faible risque de perte de condentialit avec certains appareils lectroniques (autres coute-bbs, tlphones sans ls etc.). Pour lviter, sassurer que le produit na jamais t utilis avant lachat, rinitialiser lunit de faon priodique, teindre lcoute-bb quand il nest pas en cours dutilisation. 24. Les enfants devraient tre superviss an de vous assurer quils ne jouent pas avec lappareil. 25. Le produit nest pas conu pour tre utilis par des personnes

(incluant des enfants) aux capacits physiques, sensorielles ou mentales rduites ou qui manquent dexprience et de connaissances, moins quon leur ait donn sufsamment de supervision ou dinstructions relativement lutilisation de lappareil par une personne responsable de leur scurit. CONSERVEZ CES INSTRUCTIONS Mises en garde 1. Utilisez et entreposez le produit une temprature entre 0 C

(32F) et 40C (104 F). 2. Nexposez pas cet appareil des froids ou des chaleurs extrmes, ainsi qu la lumire directe du soleil. Ne linstallez pas prs dune source de chauffage. Le bloc-piles ne doit pas tre expos la chaleur excessive telle que la lumire du soleil ou au feu. Avertissement - Risque de strangulation

- Les enfants se sont TRANGLS dans des cordons. Gardez ce cordon hors de porte des enfants ( plus de 0,9 m). Nenlevez pas cette tiquette. 5. Ne jamais placer le moniteur lintrieur du berceau ou du parc de bb. Ne jamais couvrir le moniteur ou lunit (s) portative avec un article tel une serviette ou une couverture. 6. Dautres quipements lectroniques peuvent produire des interfrences sur votre moniteur vido et audio. Tentez dinstaller votre moniteur vido ou audio lcart des appareils lectroniques tels que des routeurs sans fil, radios, tlphones cellulaires, interphones, moniteurs, tlphones, ordinateurs personnels, lectromnagers et tlphones sans fil. Stimulateurs cardiaques implants dans lorganisme Les simulateurs cardiaques (ne sapplique quaux dispositifs numriques sans fil) :

Lorganisme Wireless Technology Research, LLC (WTR), une firme de recherche indpendante, a men une valuation pluridisciplinaire des interfrences entre les tlphones sans fil portatifs et les stimulateurs cardiaques implants dans lorganisme. Appuye par lAdministration des aliments et drogues (FDA) des tats-Unis, la firme WTR recommande aux mdecins:

Avis aux dtenteurs de stimulateurs cardiaques Vous devriez maintenir les dispositifs sans fil au moins six pouces du simulateur cardiaque. Ils ne doivent PAS placer le tlphone sans fil directement sur le stimulateur cardiaque, tel que dans une poche de chemise, lorsque celui-ci est en marche. Ltude effectue par lorganisme WRS na pas identifi de risque pour les dtenteurs de simulateurs cardiaques causs par les gens qui utilisent dispositifs sans fil proximit de ceux-ci. Champs lectromagntiques (EMF) Ce produit de VTech est conforme toutes les normes se rapportant aux champs lectromagntiques (EMF) standard. Si vous le manipulez correctement en suivant les instructions de ce guide, son utilisation sera scuritaire pendant de nombreuses annes, selon les meilleures vidences scientifiques dont nous disposons aujourdhui. 3. 4. Limited warranty What does this limited warranty cover?

The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase (Consumer or you) that the Product and all accessories provided in the sales package (Product) are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the Product operating instructions. This limited warranty extends only to the Consumer for Products purchased and used in the United States of America and Canada. What will VTech do if the Product is not free from defects in materials and workmanship during the limited warranty period (Materially Defective Product)?

During the limited warranty period, VTechs authorized service representative will repair or replace at VTechs option, without charge, a Materially Defective Product. If we repair the Product, we may use new or refurbished replacement parts. If we choose to replace the Product, we may replace it with a new or refurbished Product of the same or similar design. We will retain defective parts, modules, or equipment. Repair or replacement of the Product, at VTechs option, is your exclusive remedy. VTech will return the repaired or replacement Products to you in working condition. You should expect the repair or replacement to take approximately 30 days. How long is the limited warranty period?

The limited warranty period for the Product extends for ONE (1) YEAR from the date of purchase. If VTech repairs or replaces a Materially Defective Product under the terms of this limited warranty, this limited warranty also applies to the repaired or replacement Product for a period of either (a) 90 days from the date the repaired or replacement Product is shipped to you or (b) the time remaining on the original one-year warranty; whichever is longer. What is not covered by this limited warranty?

This limited warranty does not cover:

1. Product that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, re, water or other liquid intrusion; or 2. Product that has been damaged due to repair, alteration or modication by anyone other than an authorized service representative of VTech; or 3. Product to the extent that the problem experienced is caused by signal conditions, network reliability, or cable or antenna systems; or 4. Product to the extent that the problem is caused by use with non-VTech accessories; or 5. Product whose warranty/quality stickers, product serial number plates or electronic serial numbers have been removed, altered or rendered illegible; or 6. Product purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for commercial or institutional purposes (including but not limited to Products used for rental purposes); or 7. Product returned without a valid proof of purchase (see item 2 below); or 8. Charges for installation or set up, adjustment of customer controls, and installation or repair of systems outside the unit. How do you get warranty service?

To obtain warranty service in the USA, please visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377. NOTE: Before calling for service, please review the users manual - a check of the Products controls and features may save you a service call. Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the Product(s) to the service location. VTech will return repaired or replaced Product under this limited warranty. Transportation, delivery or handling charges are prepaid. VTech assumes no risk for damage or loss of the Product in transit. If the Product failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, VTech will notify you and will request that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for the repair of Products that are not covered by this limited warranty. What must you return with the Product to get warranty service?

1. Return the entire original package and contents including the Product to the VTech service location along with a description of the malfunction or difculty; and 2. Include a valid proof of purchase (sales receipt) identifying the Product purchased (Product model) and the date of purchase or receipt; and 3. Provide your name, complete and correct mailing address, and telephone number. Other limitations This warranty is the complete and exclusive agreement between you and VTech. It supersedes all other written or oral communications related to this Product. VTech provides no other warranties for this Product. The warranty exclusively describes all of VTechs responsibilities regarding the Product. There are no other express warranties. No one is authorized to make modications to this limited warranty and you should not rely on any such modication. State/Provincial Law Rights: This warranty gives you specic legal rights, and you may also have other rights, which vary from state to state or province to province. Limitations: Implied warranties, including those of tness for a particular purpose and merchantability (an unwritten warranty that the Product is t for ordinary use) are limited to one year from the date of purchase. Some states/

provinces do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event shall VTech be liable for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost prots or revenue, inability to use the Product or other associated equipment, the cost of substitute equipment, and claims by third parties) resulting from the use of this Product. Some states/provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Please retain your original sales receipt as proof of purchase. Disclaimer and Limitation of Liability VTech Communications, Inc. and its suppliers assume no responsibility for any damage or loss resulting from the use of this users manual. VTech Communications, Inc. and its suppliers assume no responsibility for any loss or claims by third parties that may arise through the use of this product. Company: VTech Communications, Inc. Address: 9020 SW Washington Square Road - Ste 555 Tigard, OR 97223, United States Phone: 1 (800) 595-9511 in the U.S. or 1 (800) 267-7377 in Canada

compliance statement was listed in manual due to surface and interface limitation reason Label 41.6x24.6mm MANUFACTURED IN CHINA HVIN: 35-400355BUA IC: 1135B-80235700A Model: VM818HD BU SN:XXXXXXXXXXX VTech Customer Service 1-800-595-9511 www.vtechphones.com FCC ID: EW780-2357-00A A/V I.C.T.E. 8.03mm A/V I.C.T.E. MANUFACTURED IN CHINA HVIN: 35-400355BUA IC: 1135B-80235700A Model: VM818HD BU SN:XXXXXXXXXXX VTech Customer Service 1-800-595-9511 www.vtechphones.com FCC ID: EW780-2357-00A A/V I.C.T.E. 0 0 5 2 42.00

VTech Telecommunications Ltd Mar 3, 2022 To whom it may concern, Request for Permanent Confidentiality Under FCC Part 15 Certification FCC ID: EW780-2357-00A Request is hereby submitted by VTech Telecommunications Ltd. to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential and VTech Telecommunications Ltd. reserves the right to discern which parties can obtain access to these information:

Schematics Detailed Block diagrams Detailed Operational/Functional Description The rationale for request for confidentiality is as followings:

This information represents intellectual property of VTech Telecommunications Ltd. and it is subject to competition. We have invested considerable time and materials in research and development to produce the referenced product. Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. If you have questions or need further information, please contact the undersigned. Regards, Michael Tsui Approbation Supervisor

VTech Telecommunications Ltd Appendix B1 Letter of Agency for FCC Certification Sep. 27, 2017 To whom it may concern, Letter of Agency I, an officer of VTech Telecommunications Ltd do hereby authorize Intertek Testing Services (Terry Chan/ Koo Wai Ip/ Kenneth Wong/ Jess Tang) to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under Part 15 and/or Part 95 of the FCC Rules until further notice. I further certify that no party (as defined in 1.2002(b) of CFR 47, 2004) to this application, including myself, is subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C., 862. Regards, Michael Tsui Approbation Supervisor