all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 4.96 MiB | August 19 2021 | |||
1 |
|
Internal Photos | Internal Photos | 3.62 MiB | August 19 2021 | |||
1 |
|
External Photos | External Photos | 986.80 KiB | August 19 2021 | |||
1 |
|
Label Artwork and Location | ID Label/Location Info | 239.43 KiB | August 19 2021 | |||
1 |
|
Confidentiality Request | Cover Letter(s) | 98.59 KiB | August 19 2021 | |||
1 |
|
Config Photos | Test Setup Photos | 755.29 KiB | August 19 2021 | |||
1 |
|
Letter of Agency | Cover Letter(s) | 91.07 KiB | August 19 2021 | |||
1 |
|
MPE | RF Exposure Info | 105.28 KiB | August 19 2021 | |||
1 |
|
Test Report | Test Report | 1.44 MiB | August 19 2021 |
1 | User Manual | Users Manual | 4.96 MiB | August 19 2021 |
Important Safety Instructions
The applied nameplate is located at the bottom of the Baby Unit’s base.
When using your equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock
and injury, including the following:
1. Follow all warnings and instructions marked on the product.
2. Adult setup is required.
3. CAUTION: Do not install the Baby Unit at a height above 2 meters.
4. This product is not a substitute for adult supervision of the infant. Supervising the infant is the parent’s or caregiver’s
responsibility. This product could cease operating, and therefore you should not assume it will continue working
properly for any given period of time. Further, this is not a medical device and should not be used as such. This product
is intended to assist you in supervising your baby.
5. Do not use this product near water. For example, do not use it next to a bath tub, wash bowl, kitchen sink, laundry tub
or swimming pool, or in a wet basement or shower.
6. CAUTION: Use only the battery provided. There may be a risk of explosion if a wrong type of battery is used for the
Parent Viewer. The battery cannot be subjected to high or low extreme temperature and low air pressure at high
altitude during use, storage or transportation. Disposal of battery into fire or a hot oven, or mechanically crushing or
cutting or the battery can result in an explosion. Leaving the battery in an extremely high temperature surrounding
environment can result in an explosion or the leakage of flammable liquid of gas. Battery subjected to extremely low
air pressure may result in an explosion or the leakage of flammable liquid or gas. Dispose of used battery according to
the information in The RBRC seal.
7. Use only the adapters included with this product. Incorrect adapter polarity or voltage can seriously damage the
product.
Power adapter information:
Baby Unit output: Output: 5V DC 1.5A; VTech Telecommunications Ltd.; Model: VT07EUS05150
Parent Viewer output: Output: 5V DC 2A; VTech Telecommunications Ltd.; Model: VT07EUS05200
Built-in rechargeable battery information:
Zhuhai Great Power Energy Co., Ltd.; Lithium battery, 3.7V 5000mAh; Model: GSP806090-5Ah-3.7V-1S1P
8. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not
designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.
9. For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.
10. Unplug this product from the wall outlet before cleaning.
11. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Do not cut off the power adapters to replace
them with other plugs, as this causes a hazardous situation.
12. Do not allow anything to rest on the power cords. Do not install this product where the cords may be walked on or
crimped.
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
What’s Included
Cautions
1. Use and store the product at a temperature between 32oF and 104oF.
2. Do not expose the product to extreme cold, heat or direct sunlight. Do not put the product close to a heating source.
3. Batteries should not be exposed to excessive heat such as bright sunshine or fire.
SAVE THESE INSTRUCTIONS
13. This product should be operated only from the type of power source indicated on the marking label. If you are not
4.
Warning—Strangulation Hazard—Children have STRANGLED in cords. Keep this cord out of the
sure of the type of power supply in your home, consult your dealer or local power company.
reach of children (more than 3 ft (0.9m) away). Do not remove this tag.
14. Do not overload wall outlets or use an extension cord.
15. Do not place this product on an unstable table, shelf, stand or other unstable surfaces.
16. This product should not be placed in any area where proper ventilation is not provided. Slots and openings in the
back or bottom of this product are provided for ventilation. To protect them from overheating, these openings must
not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be
placed near or over a radiator or heat register.
17. Never push objects of any kind into this product through the slots because they may touch dangerous voltage points
or create a short circuit. Never spill liquid of any kind on the product.
18. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility.
Opening or removing parts of the product other than specified access doors may expose you to dangerous voltages
or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used.
19. You should test the sound reception every time you turn on the units or move one of the components.
20. Periodically examine all components for damage.
21. There is a very low risk of privacy loss when using certain electronic devices, such as baby monitors, cordless
telephones, etc. To protect your privacy, make sure the product has never been used before purchase, reset the baby
monitor periodically by powering off and then powering on the units, and power off the baby monitor if you will not
use it for some time.
22. Children should be supervised to ensure that they do not play with the product.
23. The product is not intended for use by persons (including children) with reduced physical, sensory or mental
5. Never place the Baby Unit(s) inside the baby’s crib or playpen. Never cover the Baby Unit(s) or Parent
Viewer with anything such as a towel or a blanket.
6. Other electronic products may cause interference with your baby monitor. Try installing your baby monitor as far away
from these electronic devices as possible: wireless routers, radios, cellular telephones, intercoms, room monitors,
televisions, personal computers, kitchen appliances and cordless telephones.
Precautions for users of implanted cardiac pacemakers
Cardiac pacemakers (applies only to digital cordless devices):
Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the
interference between portable wireless devices and implanted cardiac pacemakers. Supported by the U.S. Food and Drug
Administration, WTR recommends to physicians that:
Pacemaker patients
• Should keep wireless devices at least six inches from the pacemaker.
• Should NOT place wireless devices directly over the pacemaker, such as in a breast pocket, when it is turned ON.
WTR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless devices.
Electromagnetic fields (EMF)
This LeapFrog product complies with all standards regarding electromagnetic fields (EMF). If handled properly and
according to the instructions in this user’s manual, the product is safe to be used based on scientific evidence available
today.
Parent Guide
x 2
x 2
1 set for LF925HD
2 sets for LF925-2HD
Requirements
For mobile access:
LeapFrog Baby Monitor mobile app
Network
Wi-Fi router
Wi-Fi
2.4GHz 802.11 b/g/n
Internet connection
1.5 Mbps @ 720p or 2.5 Mbps @1080p upload bandwidth per Baby Unit
3. Power On or Off the Baby Monitor
1. Slide the On/Off switch to ON to power
on your Baby Unit.
2. After the Parent Viewer is fully charged,
until the welcome screen
press and hold
appears.
4. Positioning the Baby Monitor
1.
4.
70
25.5°C
> 3ft (1m)
Connect, charge and power on the baby monitor
2. Charge the Parent Viewer battery before use
1. Connect the Baby Monitor
Notes:
• The rechargeable battery in the Parent Viewer is built-in.
• Use only the power adapters supplied with this product.
• Make sure the Parent Viewer and the Baby Unit are not connected to switch controlled electric outlets.
• Connect the power adapters in a vertical or floor mount position only. The adapters’ prongs are not designed to hold
the weight of the Parent Viewer and the Baby Unit, so do not connect them to any ceiling, under-the-table, or cabinet
outlets. Otherwise, the adapters may not properly connect to the outlets.
• Make sure the Parent Viewer, the Baby Unit and the power adapter cords are out of reach of children.
• To maintain compliance with the FCC’s RF exposure guidelines, place the Baby Unit at least 20cm from nearby persons.
When you connect and turn on the Parent Viewer, the battery charges automatically.
Notes:
• Before using the baby monitor for the first time, charge the Parent Viewer battery for 12 hours.
When the Parent Viewer battery is fully charged, the battery icon becomes solid
.
• The standby time varies depending on your actual usage time and the age of the battery.
The battery icon on the screen indicates the battery status (see the following table).
Battery Indicators
Battery Status
Action
The screen displays
light flashes.
The
.
The battery icon becomes
solid
.
The battery is low in power
and may only be used for a
short time.
The battery is fully charged.
Charge without interruption
(about 30 minutes).
To keep the battery charged,
connect it to AC power when
not in use.
Overview - Parent Viewer
Tip: Do your icons look a little different? Your baby monitor probably got a recent software update. Go to our online manual for an overview of the latest icons (See Online Help).
How the system works?
Direct mode
The Parent Viewer and the Baby Unit of your video monitor connect to each other in Direct mode by
default, which allows you to stream live video right out of the box. Direct mode connection lets you
stream live video from the Parent Viewer only.
Note:
• The POWER LED Light is OFF by default.
Parent Viewer Icons
Main Menu Icons
Monitoring mode (For LF925-2HD only)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
70
25.5°C
Local access
• Turn on/off Auto Wake Up function.
General settings
2.
3.
Long press
3. Status Check
Once your Baby Unit and Parent Viewer are
powered on and connected, your Parent Viewer
displays video from the Baby Unit, and the
LINK LED light turns on. The Baby Unit’s POWER
LED light also turns on.
70
25.5°C
>
3ft (1m)
< 3ft (1m)
70
25.5°C
Detection
Sound
Baby Unit settings
1
2
1 2
• Baby Unit 1 in Single mode
• Baby Unit 2 in Single mode
• Split mode
Viewer displays video feeds
from all paired Baby Units at
the same time in split view.
• Patrol mode
Viewer displays a single
Baby Unit’s video feed that
transitions to a different Baby
Unit every 10 seconds.
• Select a night light Color.
Choose from 7 preset colors
and 3 light patterns.
• Select Auto Brightness mode
- OR -
• Adjust the fixed night light
brightness level.
• Set a Timer to turn the night
light off after 15, 30, or 60
minutes.
• Play all melodies.
• Play and view all Songs.
Choose from 5 melodies and
5 soothing sounds.
• Set a Timer to stop playing
melodies after 15, 30, or 60
minutes, or let them play
non-stop.
• Turn On/Off night light.
Temperature
• Stop melody playing.
Parent Viewer settings
• Select sound Sensitivity level.
• Turn on/off Sound Detection Alert.
Parent Viewer beeps when the Baby Unit
detects sounds above the chosen sound
sensitivity level.
Once the Baby Unit detects sounds
that are louder than the chosen sound
sensitivity level, the Parent Viewer screen
and speaker turn on automatically.
Motion
• Turn on/off Motion Alert.
Parent Viewer beeps when the Baby
Unit detects movements larger than the
chosen motion sensitivity level.
• Select motion Sensitivity level.
• Turn on/off Temperature Alert.
Parent Viewer beeps if the room
temperature detected falls outside the
set temperature range.
• Select the Minimum temperature of the
temperature alert range.
• Select Maximum temperature of the
temperature alert range.
• Select temperature Format.
Change the temperature display format
to Fahrenheit (oF) or Celsius (oC ).
• Adjust Parent Viewer screen Brightness.
• Adjust Low Battery Alert Tone Volume.
• Adjust No Link Alert Tone Volume.
• Turn on/off Dim Mode.
Parent Viewer dims to conserve energy after
5 minutes of inactivity.
• Change the Language on your Parent Viewer.
70
25.5°C
< 3ft (1m)
Note:
• To avoid interference from other electronic
devices, place your baby monitor at least 3
feet (1 meter) away from devices such as
wireless routers, microwaves, cell phones
and computers.
Caution:
• The default volume of your Parent Viewer
is level 3, and the maximum volume is
level 5. If you experience a high-pitched
screeching noise from your baby monitor
while positioning:
- Make sure your Baby Unit and Parent Viewer
are more than 3 feet (1 meter) apart, OR
- Lower the volume of your Parent Viewer.
• Activate/Deactivate Parking Mode.
• Turn on/off Status LED indicator.
When on, the POWER LED light on the Baby
Unit turns on/off or flashes to indicate the
camera’s conditions.
• Adjust the Baby Unit’s speaker Volume.
• Configure Wi-Fi.
Change your Wi-Fi network, select a
Connection Mode, and check the Baby Unit
and Parent Viewer’s Connection Status.
• Connect Mobile Phone.
• Add Baby Unit.
• Remove Baby Unit.
• Reset Settings to default.
• Software Update
Check if your Parent Viewer software is up to
date, or install a new update when available.
Status Bar Icons
or
Current view status
• The Baby Unit number that is being viewed when in:
- Single Baby Unit mode.
- Patrol mode (* For LF925-2HD or pairing with LF915-0HD)
- Split mode (* For LF925-2HD or pairing with LF915-0HD)
Split mode (* For LF925-2HD or pairing with LF915-0HD)
Patrol mode (* For LF925-2HD or pairing with LF915-0HD)
Black and white night vision is activated.
Color night vision is activated.
Motion detection and alert is turned on.
Sound detection and alert is turned on.
Melodies or soothing sounds are playing.
Night light is turned on and the automatic
brightness setting is turned off.
Link LED light
• On when the Parent Viewer
is linked to the Baby Unit.
• Flashes when the link to the
Baby Unit is lost.
Battery LED light
3-level sound indicator light
• Green: low level of sound
detected.
• Green and amber:
moderate level of sound
detected.
• Green, amber, and red: high
level of sound detected.
4
5
6
7
Night Mode quick set key
• Select black-and-white or
color night vision viewing
mode.
• Adjust night light brightness.
•
Arrow Keys
Press the arrow keys to
pan and tilt the camera.
Menu / Select
8 Microphone
9
10
11
Volume
• View the volume
adjustment bar.
Zoom
Power /
LCD Off
12 Antenna
13 Power jack
14 RESET
Talk /
Return
• Press and hold to talk to the
Baby Unit.
to exit.
• While in a sub-menu, press
15 Stand
• Force reboot the
Parent Viewer.
Overview - Baby Unit
6
6
6
11
11
11
12
12
13
13
7
8
7
8
7
8
9
10
9
10
Light sensor
Camera
Infrared LEDs
4 Microphone
Night light
1
2
3
5
6
9
10
7
8
9
POWER LED Light
On / Off switch
Antenna
10 Power jack
11
Speaker
12 Wall mount holes
13
PAIR key
CONFORMS TO
UL STD.
62368-1
CERTIFIED TO
CSA STD.
C22.2 NO.62368-1
Night light control key
• Press to turn the night light on or off.
Press and hold to adjust night light
brightness level. There are 5 levels in total.
• The Parent Viewer and Baby Unit(s)
provided are already paired.
Tip:
• You may experience reduced signal strength if your Parent Viewer and Baby Unit are far apart, or there are
obstructing factors, such as internal walls, between them. Move the Parent Viewer closer to the Baby Unit to
improve the signal strength. You can also set up Router mode to connect the units via your home Wi-Fi network
to improve the connection between your Parent Viewer and Baby Unit.
Night light
Wi-Fi Router mode
You can continue using your video monitor
with Direct mode connection, or you can set
up your monitor in Router mode connection.
Router mode uses your home Wi-Fi network
to connect your video monitor. It supports live
video streaming through the Parent Viewer
and smartphone app.
12
We recommend that you set up your monitor
in Router mode to enjoy live video streaming
via your Parent Viewer with an enhanced
connection.
70
25.5°C
Lullaby
13
If you want to stream live video remotely with
your mobile device, download and install the
LeapFrog baby monitor mobile app. With the
app, your Wi-Fi router (not included) provides
Internet connectivity to your baby monitor system. It serves as a communicating channel between
your Baby Unit and mobile device, allowing you to monitor and/or control your Baby Unit wherever
you are. For more details, see Download app for mobile access section in this Parent Guide.
Mobile access
Enhanced local access
Notes:
• Your Parent Viewer detects the connection signal strength. If you have connected your video monitor with your
home Wi-Fi network, your Parent Viewer automatically switches to direct or router mode - whichever has a
stronger signal strength.
• When both Parent Viewer and app are viewing the camera simultaneously, the video quality will be optimised
to deliver the best possible viewing result.
Key Features
Color and B&W
Automatic Night Vision
Humidity and
Temperature Sensor
Lullabies and
Soothing Sounds
Thanks to the latest starlight
sensor and noise suppression
technology, you can check in on
your baby 24/7 with the finest
clarity. Night vision is no longer
just black-and-white, you can
choose to see your baby in color
at night! For more details, see
Night Vision (B&W and Color).
is
in with
Rest assured of the environment
your baby
the
built-in real-time temperature
and humidity sensor. It lets you
know when the room is outside
a
temperature
and humidity range. For more
details, see Parent Viewer Icons
- Status Bar Icons.
comfortable
Comforting and engaging your
baby can be done easily and
from a distance. Choose from 5
lullabies and 5 soothing sounds
to help lull your baby back to
sleep. For more details, see
Parent Viewer Icons - Lullaby.
Night Light
Motion and Sound Sensor
Pan, Tilt, and Zoom
for
Need some additional lighting
near your baby
those
bedtime stories? The built-in
night light on the baby monitor
can help with that. You can
control the night light directly on
the Baby Unit, or remotely from
the Parent Viewer. For more
details, see Parent Viewer Icons
- Night Light.
With adjustable alerts on noise
or motion detected from the
baby monitor, give yourself a
peace of mind with an extra
set of eyes. For more details,
Icons -
see Parent Viewer
Detection.
Track your little one’s every move
with 360-degree panoramic
viewing, and tilt to view up to
100 degrees. Need more detail?
The camera zooms up to 10x
with the mobile app, or 4x from
the parent unit. For more details,
see Overview - Parent Viewer.
Technical Specifications
Frequency
Channels
LCD
2412-2462 MHz
1-11
5” Color LCD
(IPS 1280x720 pixels)
Nominal effective range
Maximum power allowed by FCC and IC. Actual operating range may
vary according to environmental conditions at the time of use.
Power requirements
Parent Viewer: 3.7V 5000mAh Lithium-ion battery
Baby Unit power adapter: Output: 5V DC @ 1.5A
Parent Viewer power adapter: Output: 5V DC @ 2A
Credits:
The Background Noise sound file was created by Caroline Ford, and is used under the Creative Commons license.
The Stream Noise sound file was created by Caroline Ford, and is used under the Creative Commons license.
The Crickets At Night sound file was created by Mike Koenig, and is used under the Creative Commons license.
The Heart Beat sound file was created by Zarabadeu, and is used under the Creative Commons license.
1
2
3
1
2
3
4
5
1
2
3
4
5
1
2
3
4
5
Touch and learn!Touch and learn!Read our complete warranty policy online at leapfrog.com/warranty.Visit our website leapfrog.com leapfrog.com for more information about products, downloads, resources and more.LeapFrog Enterprises, Inc.,a subsidiary of VTech Holdings Limited.TM and © 2021 LeapFrog Enterprises, Inc.All right reserved.Scan the QR code to enter our Online Help page:Or go to www.leapfrog.zendesk.comLF925HDLF925-2HD5” High Definition5” High DefinitionPan & Tilt MonitorPan & Tilt MonitorNeed help?Visit leapfrog.com/support Parent GuideThis guide contains important information.Please keep it for future reference.Parent Viewer Icons (continued)
Status Bar Icons (continued)
Alert Icons
Night light is turned on and the automatic
brightness setting is turned on.
Parent Viewer speaker is muted.
Temperature alert is turned on.
5050
Humidity is lower than 30%.
Humidity is within 30-60%.
Humidity is higher than 60%.
70 FF ˚˚FF Temperature is lower than 68°F.
˚˚FF Temperature is between 68-75°F.
˚˚FF Temperature is higher than 75°F.
Battery level indicator
• Displays when the Parent
Viewer’s battery is low and
needs charging.
• Displays when motion is
detected by a Baby Unit.
• Displays when sound is
detected by a Baby Unit.
• Displays when the
temperature detected by
the Baby Unit exceeds the
set maximum.
• Displays when the
temperature detected by
the Baby Unit is lower than
the set minimum.
Night Vision (B&W and Color)
When the Baby Unit being viewed detects
low light levels, the infrared LEDs switch on
automatically with the activiation of the B&W
Night Vision mode. Baby Unit has infrared
LEDs that allow you to see your baby clearly at
night or in a dark room. When Black and White
Night Vision mode is activated,
appears on
the screen. When Color Night Vision mode is
activated,
appears on the screen.
Notes:
• It is normal to see a short white glare on your Parent
Viewer screen as the Baby Unit is adapting to the
dark environment.
• If you adjust the night vision mode while night vision
is not activated, the new settings will be saved and
applied the next time it activates.
Tip:
• The video quality may vary depending on the
surrounding environment and interfering factors like
lightings, objects, colors and backgrounds. Adjust
the Baby Unit’s angle or place the Baby Unit at a
higher elevation to prevent glare and blurry displays.
Night Vision
Mode
Description
B&W Night Vision
Suitable for extremely dark or low
light environments.
Images will be in black-and-white.
Color Night Vision
Suitable for low-light room
conditions with night light as an
assisting light source.
Images will be in color.
Change your night vision viewing mode
1. Press the Night Mode quick set key
to view the Night Mode menu.
or
2. Press
to choose
black-and-white night vision viewing or
for color night vision viewing.
for
Mount the Baby Unit on a dry wall (optional)
Notes:
• Check for reception strength and the Baby Unit’s viewing angle before drilling the holes.
• The types of screws and anchors you need depend on the composition of the wall. You may need to purchase the
screws and anchors separately to mount your Baby Units.
to step 3.
•
If you drill the holes into an object
other than a stud, insert the wall
anchors into the holes. Tap gently
on the ends with a hammer until
the wall anchors are flush with the
wall.
3. Insert the screws into
the holes and tighten
the screws until only 1/4
inch of the screws are
exposed.
OR
1
4. Place the Baby Unit on
the wall mount bracket.
Tighten the screw into
the threaded socket at
the bottom to secure
the Baby Unit. Align the
holes on the wall mount
bracket with the screws
on the wall, and slide
the wall mount bracket
down until it locks into
place.
2
1. Place the wall mount bracket
on a wall and then use a
pencil to mark the top and
the bottom holes as shown.
Remove the wall mount
bracket and drill two holes in
the wall (7/32 inch drill bit).
3. Align the wall mount
bracket and screws with
the holes in the wall as
shown. Tighten the screw
in the middle hole first,
so that the wall mount
bracket position is fixed.
You can tighten the other
screw in the top hole.
4. Place the Baby Unit on
the wall mount bracket.
Tighten the screw into
the threaded socket at
the bottom to secure the
Baby Unit.
5. You can maximize your Baby Unit’s
viewing angles by tilting the wall mount
bracket.
Hold the Baby Unit, and then rotate
the knob in an anti-clockwise direction.
This will loosen the joint of the wall
mount bracket.
Tilt your Baby Unit up or down to adjust
to your preferred angle. Then, rotate
the knob in a clockwise direction to
tighten the joint and secure the angle.
Basic Operation - Parent Viewer
to open the volume adjustment
Adjust Parent Viewer’s speaker volume
1. Press
bar.
2. Press
and
to decrease the speaker volume.
to increase the speaker volume
Turn on/off the Parent Viewer screen
You can turn on or off the Parent Viewer
screen without powering off the Parent Viewer.
You will still hear sounds from the Baby Unit.
• Press
on the Parent Viewer to turn the
screen off.
• Press any key on the Parent Viewer to turn
the screen on again.
Night Light
Want a softer hue from the Baby Unit’s night light to relax your little one? You can control the brightness
of its glow remotely from your Parent Viewer, or directly on the Baby Unit.
Adjust the night light on the Parent Viewer
Adjust the night light on the Baby Unit
• Tap the Night light control key
located on the
top of the Baby Unit to turn on/off the night light.
to
• Tap and hold the Night light control key
adjust the night light’s brightness.
• Press and hold to adjust the brightness level.
It changes level by level at a time.
Parking Mode
Designed to give you an additional peace of mind, turn on
Parking Mode for a moment of privacy.
When turned on, the Baby Unit will fold into the parking
position and disable its camera’s audio transmission and video
monitoring.
In Parking Mode, motion recording, motion detection, and
sound detection will also be temporarily unavailable.
Activate Parking Mode:
1. Press
to enter the main menu.
2. Go to
Baby Unit Settings.
3. Press
to Parking Mode, press
to toggle the switch on.
(cid:57)(cid:78)(cid:91)(cid:90)(cid:90)(cid:79)(cid:84)(cid:77)(cid:3)(cid:74)(cid:85)(cid:93)(cid:84)(cid:20)(cid:20)(cid:20)
For LF925-2HD and Pairing with LF915-0HD Only
Talk to your baby via the Baby Unit
1. Press and hold the
key.
2. When the
icon displays on the screen,
speak to your Parent Viewer. Your voice is
transmitted to the Baby Unit.
3. When finished talking, release the
key
and hear your baby again.
Press and hold
Zoom
Press
sequence is 1x
to zoom in or out. The zoom
, 4x
, then 8x
, 2x
.
70
25.5°C
70
25.5°C
70
25.5°C
to enter the menu, choose a menu
Use the menu
Press
item, or save a setting. You can use the Parent
Viewer for advanced settings or operations,
such as to play or stop the Baby Unit’s lullaby,
or to adjust the Baby Unit sound sensitivity.
, or
to scroll among the
While in the menu:
• Press
,
menu options.
,
setting.
• Press
to select an item, or to save a
• Press
/
to return to the live video.
• Press
to go to the Help & Info page.
to brighten the night light (or turn on
1. Press the Night Mode quick set key
to view the Night Mode menu.
2. Press
the night light when it is switched off).
Press
to dim the night light (or turn off the
night light when it is at the lowest brightness
level).
- OR -
1. Press
to enter the main menu.
2. Press
again to select
Night Light.
3. Press
and
4. Press
and
to select
, press
to choose the desired
.
brightness level, then press
your selection.
to confirm
Test the location for the Baby Unit
If you plan to install your Baby Unit to a designated
location, and will use your home Wi-Fi network to
connect your video monitor, you need to test which of
your selected monitoring areas within the house have
good Wi-Fi signal strength.
After you have powered on your Parent Viewer, you
can check the Parent Viewer’s Wi-Fi signal strength by
going to:
> Configure Wifi > Connection Status.
Adjust the distance between your Baby Unit and the
Wi-Fi router if needed. Once you have identified a
suitable location with good connection, you can install
your Baby Unit.
Monitoring mode
1
2
Patrol mode
Select Patrol mode as your monitoring
mode to alternately view the video feed
from Baby Units
every
10 seconds.
and
70
25.5°C
Split mode
1 2
Long press
Note:
• If Auto Brightness has been pre-selected, any adjustments in night light brightness (either on the Baby Unit or
the Parent Viewer) will automatically turn Auto Brightness mode off and switch to the fixed brightness level.
Single CAM mode
70
25.5°C
2. Download and install the free LeapFrog mobile
Select Baby Unit 1
to
view the video feed from the selected Baby Unit.
or Baby Unit 2
70
25.5°C
70
25.5°C
70
25.5°C
10s
Auto software and firmware update
Monitoring mode
1
2
1 2
1
2
1
Help
50
26°C
Select
Exit
Tip:
• Depending on surroundings and obstructing factors that affect signal strength, such as distance and
internal walls, you may experience reduced Wi-Fi signals. To improve the Wi-Fi signal strength, adjust the
distance or direction of your Parent Viewer. Check with your Parent Viewer again.
Note:
• While in Split mode, you can press
or
to highlight the view of the Baby Unit 1
or Baby Unit 2
, and hear the sounds transmitted from the highlighted Baby Unit.
70
25.5°C
70
25.5°C
Select Split mode as your monitoring mode to view the video feeds
from both Baby Units at once.
> Software Update.
2. If you drill the holes into a stud, go
“WPA2-PSK with AES” setting in your router’s wireless security menu.
Protect your privacy and online security
LeapFrog cares about your privacy and peace of mind. That’s why we’ve put together a list of industry-
recommended best practices to help keep your wireless connection private and your devices protected
when online. We recommend you carefully review and consider complying with the following tips.
Ensure your wireless connection is secure.
• Before installing a device, ensure your router’s wireless signal is encrypted by selecting the
Change default settings.
• Change your wireless router’s default wireless network name (SSID) to something unique.
• Change default passwords to unique, strong passwords. A strong password:
- Is at least 10 characters long.
- Is complex.
- Does not contain dictionary words or personal information.
- Contains a mix of uppercase letters, lowercase letters, special characters and numbers.
Keep your devices up to date.
• Download security patches from manufacturers as soon as they become available. This will ensure
you always have the latest security updates.
If the feature is available, enable automatic updates for future releases.
•
Disable Universal Plug and Play (UPnP) on your router.
• UPnP enabled on a router can limit the effectiveness of your firewall by allowing other network
devices to open inbound ports without any intervention or approval from you. A virus or other
malware program could use this function to compromise security for the entire network.
For more information on wireless connections and protecting your data, please review the following
resources from industry experts:
1. Federal Communications Commission: Wireless Connections and Bluetooth Security Tips –
www.fcc.gov/consumers/guides/how-protect-yourself-online.
2. U.S. Department of Homeland Security: Before You Connect a New Computer to the Internet –
www.us-cert.gov/ncas/tips/ST15-003.
3. Federal Trade Commission: Using IP Cameras Safely –
https://www.consumer.ftc.gov/articles/0382-using-ip-cameras-safely.
4. Wi-Fi Alliance: Discover Wi-Fi Security –
http://www.wi-fi.org/discover-wi-fi/security.
Instructions for Care
FOR INDOOR, DRY-LOCATION USE ONLY.
To keep this product in good condition, follow these guidelines:
•
•
•
Avoid putting it near heating appliances and devices
that generate electrical noise (for example, motors or
fluorescent lamps).
Do not spill liquid of any kind on this product or
immerse the product in water as it may render it
inoperative.
Clean with a slightly damp cloth in cold water (do not
use soap, detergent, or other chemicals).
Keep food and beverages away from this product.
• Make sure the product is dry before you connect it to
the power source again.
Never try to dismantle the unit.
Avoid prolonged exposure to extreme temperatures
and direct sunlight or moisture.
Avoid dropping the product or treating it roughly.
•
•
•
•
Disclaimer and Limitation of Liability
LeapFrog and its suppliers assume no responsibility for any damage or loss resulting from the use of this handbook.
LeapFrog and its suppliers assume no responsibility for any loss or claims by third parties that may arise through the use of
this software. LeapFrog and its suppliers assume no responsibility for any damage or loss caused by deletion of data as a
result of malfunction, dead battery, or repairs. Be sure to make backup copies of important data on other media to protect
against data loss.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT
ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
CAN ICES-3 (B)/NMB-3(B)
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Warranty: Please visit our website at leapfrog.com for full details of the warranty provided in your country.
The RBRC seal
The RBRC seal on the Li-ion battery indicates that VTech Communications, Inc. is voluntarily participating
in an industry program to collect and recycle these batteries at the end of their useful lives, when taken out
of service within the United States and Canada. The program provides a convenient alternative to placing
used Li-ion batteries into the trash or municipal waste, which may be illegal in your area.
VTech’s participation makes it easy for you to drop off the spent battery at local retailers participating in the
program or at authorized VTech product service centers. Please call 1 (800) 8 BATTERY® for information
on Li-ion battery recycling and disposal bans/restrictions in your area. VTech’s involvement in this program is part of its
commitment to protecting our environment and conserving natural resources.
The RBRC Seal and 1 (800) 8 BATTERY® are registered trademarks of Call2recycle, Inc.
FCC and IC regulations
FCC Part 15
This equipment has been tested and found to comply with
the requirements for a Class B digital device under Part 15 of
the Federal Communications Commission (FCC) rules. These
requirements are intended to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there
is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
receiver.
for help.
WARNING: Changes or modifications to this equipment not
expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
To ensure safety of users, the FCC has established criteria for the
amount of radio frequency energy that can be safely absorbed
by a user or bystander according to the intended usage of the
product. This product has been tested and found to comply
with the FCC criteria. The Baby Unit shall be installed and used
such that parts of all persons’ body are maintained at a distance
of approximately 8 in (20 cm) or more. The transmitter and
antenna of the Parent Viewer shall be held at least 1 in (2.5 cm)
from your face.
This Class B digital apparatus complies with Canadian
requirement: CAN ICES-3 (B)/NMB-3(B)
device
contains
licence-exempt
Industry Canada
This
transmitter(s)/
receiver(s) that comply with Innovation, Science and Economic
Development Canada’s
licence-exempt RSS(s). Operation
is subject to the following two conditions: (1) This device
may not cause interference. (2) This device must accept any
interference, including interference that may cause undesired
operation of the device.
The term ‘’IC:‘’ before the certification/registration number only
signifies that the Industry Canada technical specifications were
met.
This product meets the applicable Innovation, Science and
Economic Development Canada technical specifications.
RF radiation exposure statement
The product complies with FCC RF radiation exposure limits set
forth for an uncontrolled environment. The Baby Unit should
be installed and operated with a minimum distance of 8 in (20
cm) between the Baby Unit and all persons’ body. Use of other
accessories may not ensure compliance with FCC RF exposure
guidelines. This equipment complies also with Industry Canada
RSS-102 with respect to Canada’s Health Code 6 for Exposure
of Humans to RF Fields.
For cETL compliance only
Mesures de sécurité importantes
La plaque signalétique appliquée est située au bas du socle de
l’unité du bébé.
Lorsque vous utilisez votre appareil, vous devriez toujours suivre
certaines mesures de précaution de base afin de réduire les
risques d’incendie, d’électrocution et de blessures corporelles,
dont ceux qui suivent :
1. Observez toutes les instructions et mises en garde inscrites
sur l’appareil.
L’installation par un adulte est requise.
2.
3. MISE EN GARDE: N’installez pas l’unité du bébé à une hauteur
supérieure à 2 mètres.
4. Ce produit ne remplace pas la surveillance adulte du nourrisson.
La supervision du nourrisson est la responsabilité du parent
ou de la personne qui s’occupe de l’enfant. Ce produit pourrait
cesser de fonctionner et, par conséquent, vous ne devriez pas
présumer qu’il continuera de fonctionner correctement pendant
une période de temps donnée. De plus, il ne s’agit pas d’un
instrument médical et ne devrait pas être utilisé comme tel. Ce
produit est destiné à vous aider à superviser votre bébé.
5. N’utilisez pas cet appareil près de l’eau ni de toute autre
source d’humidité, par exemple, près d’une baignoire, cuve
à lessive, évier de cuisine, dans un sous-sol humide ni près
d’une piscine, dans un soussol humide ou une douche.
6. MISE EN GARDE: Utilisez uniquement la pile fournie. Un
risque d’explosion pourrait survenir si un mauvais type de
pile est utilisé pour l’unité du parent. La pile ne peut pas être
soumise à des températures extrêmes élevées ou basses et à
une faible pression d’air à haute altitude pendant l’utilisation,
l’entreposage ou le transport. L’élimination de la pile dans le
feu ou dans un four chaud, ou l’écrasement ou le découpage
mécanique de la pile peuvent entraîner une explosion. Laisser
la pile dans un environnement à température extrêmement
élevée peut entraîner une explosion ou la fuite d’un liquide ou
d’un gaz inflammable. Une pile soumise à une pression d’air
extrêmement basse peut provoquer une explosion ou une
fuite de liquide ou de gaz inflammable. Éliminer la pile usagée
conformément aux informations du Sceau RBRC.
7. N’utilisez que les adaptateurs inclus avec ce produit.
L’utilisation d’un adaptateur dont la polarité ou la tension
serait inadéquate risque d’endommager sérieusement le
produit et mettre votre sécurité en péril.
8.
9.
Informations sur les adaptateurs électriques :
Adaptateur de l’unité du parent : Sortie : 5V DC 2A
VTech Telecommunications Ltd.
Modèle: VT07EUS05200
Adaptateur de l’unité du bébé : Sortie : 5V DC 1.5A
VTech Telecommunications Ltd.
Modèle: VT07EUS05150
3.
4.
Informations sur les piles rechargeables :
Zhuhai Great Power Energy Co., Ltd.
Lithium battery, 3.7V 5000mAh;
Modèle: GSP806090-5Ah-3.7V-1S1P
Lorsqu’ils sont branchés dans une prise de courant, les
adaptateurs secteur ont été conçus pour être orientés
correctement, soit à la verticale ou au plancher. Les broches
n’ont pas été conçues pour supporter le poids du bloc
d’alimentation et le maintenir en place si celuici est branché
dans une prise au plafond, sous une table ou dans un meuble.
Pour les PRODUITS À BRANCHER À UNE PRISE DE
COURANT, la prise de courant doit être installée près du
produit, afin d’assurer une accessibilité sécuritaire à la prise
de courant.
10. Débranchez ce produit de la prise de courant avant de
procéder au nettoyage. N’utilisez pas de nettoyants en
aérosols. Utilisez un chiffon humide pour le nettoyer.
11. Ne coupez pas les cordons d’alimentation pour remplacer les
fiches, car ceci peut présenter un danger potentiel.
12. Ne laissez aucun objet reposer ni appuyer sur le cordon
d’alimentation. N’installez pas cet appareil dans un endroit
où l’on risque d’écraser le cordon d’alimentation ou de le
piétiner.
13. Ne faites fonctionner cet appareil qu’avec le type
d’alimentation indiqué sur l’étiquette. Si vous ne connaissez
pas le type d’alimentation que vous possédez à votre
domicile, consultez votre marchand ou votre compagnie
locale d’électricité.
14. Ne surchargez pas les prises de courant murales ni les
rallonges électriques.
15. Ne placez pas cet appareil sur un chariot, meuble, trépied,
support de montage ni table chancelants.
16. Les trous et ouvertures du boîtier, situés à l’arrière de
l’appareil ou sous celui-ci, servent à aérer l’appareil. Pour
l’empêcher de surchauffer, ne bloquez sous aucun prétexte
ces ouvertures et n’empêchez pas l’aération adéquate de
l’appareil en le plaçant sur un lit, divan, tapis ou toute autre
surface similaire. De même, ne le positionnez pas à proximité
ni au-dessus d’une source de chaleur ou d’un calorifère. De
plus, ne placez pas l’appareil dans un endroit avant de vous
assurer qu’il y ait une bonne circulation d’air.
17. N’enfoncez jamais d’objets à travers les ouvertures de cet
appareil, car ils pourraient entrer en contact avec des points de
tension dangereux ou causer des courts-circuits qui peuvent
dégénérer en incendies ou en risques d’électrocution. Ne
renversez jamais de liquide dans ce produit.
18. Afin de réduire les risques d’électrocution, ne démontez
pas cet appareil, mais apportez-le dans un centre de service
autorisé. L’ouverture du boîtier ou le retrait de toutes pièces
que contient cet appareil, à l’exception de l’accès autorisé
à certaines portes ou ouvertures, risque de vous exposer à
des points de tension dangereux ou d’autres dangers. Un
remontage incorrect peut par la suite présenter des risques
d’électrocution.
19. Vous devriez tester la réception chaque fois que vous mettez
l’appareil en fonction.
21.
20. Examinez les composantes afin de vérifier si celles-ci ne sont
pas endommagées.
Il existe un très faible risque de perte de confidentialité
avec certains appareils électroniques (autres écoute-bébés,
téléphones sans fils etc.). Pour l’éviter, s’assurer que le
produit n’a jamais été utilisé avant l’achat, réinitialiser l’unité
de façon périodique, éteindre l’écoute-bébé quand il n’est
pas en cours d’utilisation.
22. Les enfants devraient être supervisés afin de vous assurer
qu’ils ne jouent pas avec l’appareil.
23. Le produit n’est pas conçu pour être utilisé par des personnes
(incluant des enfants) aux capacités physiques, sensorielles
ou mentales réduites ou qui manquent d’expérience et de
connaissances, à moins qu’on leur ait donné suffisamment
de supervision ou d’instructions relativement à l’utilisation de
l’appareil par une personne responsable de leur sécurité.
CONSERVEZ CES INSTRUCTIONS
Mises en garde
1. Utilisez et entreposez le produit à une température entre 0˚
C (32˚F) et 40˚C (104˚ F).
2. N’exposez pas cet appareil à des froids ou des chaleurs
extrêmes, ainsi qu’à la lumière directe du soleil. Ne l’installez
pas près d’une source de chauffage.
Le bloc-piles ne doit pas être exposé à la chaleur excessive
telle que la lumière du soleil ou au feu.
Avertissement - Risque de strangulation
- Les enfants se sont ÉTRANGLÉS dans des
cordons. Gardez ce cordon hors de portée des
enfants (à plus de 0,9 m). N’enlevez pas cette
étiquette.
5. Ne jamais placer le moniteur à l’intérieur du berceau ou du
parc de bébé. Ne jamais couvrir le moniteur ou l’unité (s)
portative avec un article tel une serviette ou une couverture.
6. D’autres équipements électroniques peuvent produire des
interférences sur votre moniteur vidéo et audio. Tentez
d’installer votre moniteur vidéo ou audio à l’écart des appareils
électroniques tels que des routeurs sans fil, radios, téléphones
cellulaires, interphones, moniteurs, téléphones, ordinateurs
personnels, électroménagers et téléphones sans fil.
Stimulateurs cardiaques implantés dans l’organisme
Les simulateurs cardiaques (ne s’applique qu’aux dispositifs
numériques sans fil) :
L’organisme ‘Wireless Technology Research, LLC (WTR)’,
une firme de recherche indépendante, a mené une évaluation
pluridisciplinaire des interférences entre les téléphones sans
fil portatifs et les stimulateurs cardiaques implantés dans
l’organisme. Appuyée par l’Administration des aliments et
drogues (FDA) des États-Unis, la firme WTR recommande aux
médecins:
Avis aux détenteurs de stimulateurs cardiaques
• Vous devriez maintenir les dispositifs sans fil à au moins six
•
pouces du simulateur cardiaque.
Ils ne doivent PAS placer le téléphone sans fil directement sur
le stimulateur cardiaque, tel que dans une poche de chemise,
lorsque celui-ci est en marche.
L’étude effectuée par l’organisme WRS n’a pas identifié de risque
pour les détenteurs de simulateurs cardiaques causés par les gens
qui utilisent dispositifs sans fil à proximité de ceux-ci.
Champs électromagnétiques (EMF)
Ce produit de LeapFrog est conforme à toutes les normes se
rapportant aux champs électromagnétiques (EMF) standard. Si
vous le manipulez correctement en suivant les instructions de
ce guide, son utilisation sera sécuritaire pendant de nombreuses
années, selon les meilleures évidences scientifiques dont nous
disposons aujourd’hui.
Download app for mobile access
Step 1
Download the free LeapFrog mobile app and
install it to a mobile device, then use your mobile
device and the mobile app to monitor your areas
remotely.
1. Press
MENU on the Parent Viewer.
2. Go to
> Connect Mobile Phone.
3. Scan the QR code in the Parent Viewer to
download the app into your mobile device.
4. Follow the instructions in the app to set up and
pair your Baby Unit to the app.
Alternatively, you can download the mobile app
from the App Store or Google Play store.
Install LeapFrog mobile app
1. Browse the App Store
.
store
or the Google Play
app to your mobile device.
-OR-
Scan the QR code below to get the app.
Note:
• Make sure your mobile device meets the
minimum requirement for the mobile app.
Minimum requirements:
The mobile app is compatible with:
• AndroidTM 5.0 or later; and
•
iOS 11.0 or later.
Step 2
After installing the mobile app, follow the
instructions in the app and Parent Viewer to set up
and pair your Baby Unit.
In your mobile device:
1. Open the mobile app in your mobile device,
and then create a new user account.
2. We recommend that you use common
webmail services, such as Google Gmail, for
the registration of your user account. Check
your email (and Spam folder), and activate
your new user account via the email link
3. Sign in to your account.
4. On the app homepage, tap
to show the
Camera Menu, then tap Add Camera. Follow
the instructions to pair your Baby Unit.
To ensure that your baby monitor is always at its best performance, the Parent Viewer will
prompt you to update its software and the Baby Unit's firmware when there are new versions
available.
• Follow the instructions on the Parent Viewer screen to update your baby monitor. To check if
your device is running on the latest software, or to update your device software, go to:
Connect your baby monitor to Wi-Fi
You must connect your baby monitor to a secured home Wi-Fi network in order to receive the
latest software and firmware updates. To set Wi-Fi up, go to:
> Configure Wi-Fi > Change Wi-Fi Networks.
Troubleshooting
Symptom
Try this
Why does the baby
monitor not respond
normally?
Try the following (in the order listed) for a common cure:
1. Disconnect the power to the Baby Unit(s) and the Parent Viewer.
2. Wait a few seconds before connecting power back to the Baby Unit(s) and the Parent Viewer.
3. Turn on the Baby Unit(s) and the Parent Viewer.
4. Wait for the Parent Viewer to synchronize with the Baby Unit(s). Allow up to one minute for this
to take place.
Why doesn’t the Baby
Unit’s and Parent
Viewer’s power LED turn
on when I switch on the
units?
The Parent Viewer may not be connected to power. Insert the appliance plug into the power jack
of the Parent Viewer and put the adapter in a wall socket. Then, press the
Power button on the
Parent Viewer to establish connection with the Baby Unit.
The Baby Unit may not be connected to power. Insert the appliance plug into the power jack of the
Baby Unit and put the adapter in a wall socket. Then, slide the On/Off switch on the Baby Unit to
establish connection with the Parent Viewer.
Why are my images in
black and white?
The images are in black white during night-time or in a dark room when night vision is
automatically activated. You can also choose to view your baby at night in color, see Night Vision
(B&W and Color) to learn how.
Why is the Baby Unit
producing a high-pitched
noise?
The Parent Viewer and Baby Unit(s) may be too close to each other.
• Move the Parent Viewer away from the Baby Unit(s) until the noise stops (OR)
• Turn down the volume of your Parent Viewer.
Why does the Parent
Viewer beep?
The Baby Unit(s) may be out of range. Move the Parent Viewer closer to the Baby Unit(s) (but not
less than 3 feet).
Why can’t I hear any
sounds from the Parent
Viewer? Why can’t I
hear my baby cry?
Why can’t I establish a
connection? Why does
my connection cut off
every now and then?
Why are there sound
interruptions?
The Parent Viewer may not have enough battery for the Parent Viewer to perform normally.
Charge the Parent Viewer until the battery icon becomes solid
.
The temperature of your baby’s room may be too high or too low.
The Parent Viewer speaker volume may be too low or muted. Press
adjustment menu, then press
menu to change the Parent Viewer’s sound sensitivity to the highest level ( level 5), see Sound
Detection and Auto Wake Up.
to increase the speaker volume. Or you can use the Parent Viewer
to open the volume
The Baby Unit(s) may be out of range. Move the Parent Viewer closer to the Baby Unit(s) (but not
less than 3 feet).
Other electronic and wireless products may cause interference with your baby monitor. Try
installing your baby monitor as far away from these devices as possible.
If you powered on only one Baby Unit but have two paired to the Parent Viewer, your Parent
Viewer may display
turned on via the menu.
and the LINK LED light flashes. Switch to the Baby Unit you have
Customer Support
Visit our Consumer Support website 24 hours a day at:
U.S.: leapfrog.com/support
C.A.: leapfrog.ca/support
Or call our Customer Service number: 1 (800) 701-5327 in the U.S. and Canada during Customer Service hours
Monday to Friday, 9am - 6pm Central Time
Online Help
Find the answer to your question on our Online Help page. There, you will find information about
product installation, features, operations, and settings. Get assisted at your own pace with video
walk-throughs and Frequently Asked Questions.
Visit www.leapfrog.zendesk.com or scan the QR code to enter our Online Help page.
Specifications are subject to change without notice.
© 2021 LeapFrog Enterprises, Inc.,
a subsidiary of VTech Holdings Limited.
All rights reserved. 08/21. LF925-XHD_QSG_V2.
1 | Confidentiality Request | Cover Letter(s) | 98.59 KiB | August 19 2021 |
VTech Telecommunications Ltd
June 05, 2021
To whom it may concern,
Request for Permanent Confidentiality
Under FCC Part 15 Certification
FCC ID: EW780-2520-00
Request is hereby submitted by VTech Telecommunications Ltd. to withhold
permanently from public review certain portions of the application for equipment
certification for the referenced FCC identifiers. This request for confidentiality is
made pursuant to 47 CFR § 0.457(d) and 0.459 of the FCC Rules. In particular, the
following sections of the application are to be kept permanently confidential and
VTech Telecommunications Ltd. reserves the right to discern which parties can
obtain access to these information:
Schematics
Detailed Block diagrams
Detailed Operational/Functional Description
The rationale for request for confidentiality is as followings:
This information represents intellectual property of VTech Telecommunications Ltd.
and it is subject to competition. We have invested considerable time and materials in
research and development to produce the referenced product. Disclosure of the
permanently confidential portions of this application to competitors would not only
give them significant competitive advantages in developing similar products, but
would also disclose successful implementation of unpublished, leading edge
technology developed by us.
If you have questions or need further information, please contact the undersigned.
Regards,
Michael Tsui
Approbation Supervisor
1 | Letter of Agency | Cover Letter(s) | 91.07 KiB | August 19 2021 |
Appendix B1
Letter of Agency for FCC Certification
June 05, 2021
To whom it may concern,
Letter of Agency
I, an officer of VTech Telecommunications Limited do hereby
authorize Intertek Testing Services (Mr. Kenneth Wong) to act on our
behalf in front of the Federal Communications Commission with respect
to all matters relating to certification of equipment under Part 15 and/or
Part 95 of the FCC Rules until further notice.
I further certify that no party (as defined in §1.2002(b) of CFR 47, 2004) to
this application, including myself, is subject to a denial of federal benefits,
that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug
Abuse Act of 1988, 21 U.S.C., 862.
Regards,
Michael Tsui
Approbation Supervisor
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2021-08-19 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2021-08-19
|
||||
1 | Applicant's complete, legal business name |
VTech Telecommunications Ltd
|
||||
1 | FCC Registration Number (FRN) |
0015973951
|
||||
1 | Physical Address |
23/F Tai Ping Ind Center Block 1 57 Ting Kok Rd
|
||||
1 |
23/F Tai Ping Ind Center Block 1
|
|||||
1 |
Tai Po NT, N/A
|
|||||
1 |
Hong Kong
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
T******@intertek.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
EW7
|
||||
1 | Equipment Product Code |
80-2520-00
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
M**** T********
|
||||
1 | Title |
Approbation Supervisor
|
||||
1 | Telephone Number |
852-2********
|
||||
1 | Fax Number |
852-2********
|
||||
1 |
m******@vtech.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Intertek Testing Services Hong Kong Ltd.
|
||||
1 | Name |
K**** W********
|
||||
1 | Physical Address |
2/F., Garment Centre
|
||||
1 |
Hong Kong
|
|||||
1 | Telephone Number |
(852)********
|
||||
1 | Fax Number |
(852)********
|
||||
1 |
k******@intertek.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
Intertek Testing Services Hong Kong Ltd.
|
||||
1 | Name |
K****** W****
|
||||
1 | Physical Address |
2/F., Garment Centre
|
||||
1 |
Hong Kong
|
|||||
1 | Telephone Number |
(852)********
|
||||
1 | Fax Number |
(852)********
|
||||
1 |
k******@intertek.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Video Monitor - Baby Unit | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | Yes | ||||
1 | Grant Comments | Output power listed is conducted. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Intertek Testing Services Hong Kong Ltd.
|
||||
1 | Name |
B******** C****
|
||||
1 | Telephone Number |
85221********
|
||||
1 | Fax Number |
85227********
|
||||
1 |
b******@intertek.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.1932000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC