FCC ID: EW780-1318-00 Video Monitor with Adjustable Lens (Baby Unit)

Go to www.vtechphones.com to register your product for enhanced warranty support and the latest VTech product news. VM2251 VM2251-2 Video Monitor BC Congratulations on purchasing your new VTech product. Before using this product, please read Important safety instructions. This manual has all the feature operations and troubleshooting necessary to install and operate your new VTech product. Please review this manual thoroughly to ensure proper installation and operation of this innovative and feature rich VTech product. For support, shopping, and everything new at VTech, visit our website at www.vtechphones.com. Whats in the box Connect and charge the battery NOTES The rechargeable battery is pre-installed in your parent unit. Use only the power adapters supplied with this product. Make sure the electrical outlets are not controlled by wall switches. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if they are plugged into a ceiling, under-the-table or cabinet outlet. Make sure the parent unit, the baby unit and the power adapter cords are out of reach of children. Connect the baby monitor Charge the parent unit battery When you have connected and turned on and turned on the parent unit, the battery will be charged

, the battery will be charged automatically. The battery icon indicates the battery status (see the following table). NOTES The parent unit battery is fully charged after 11 hours of continuous charging. It takes longer to charge the battery when the parent unit is turned on. To shorten the charging time, turn the parent unit off while charging. The standby time varies depending on the volume level you set and your actual use. Battery indicators Battery status Action The screen displays Battery low at Parent Unit. The or light flashes. The battery has very little charge and may be used for only a short time. The battery is fully charged. Charge without interruption

(about 30 minutes). To keep the battery charged, connect it to AC power when not in use. Before use NOTES This baby monitor is intended as an aid. It is not a substitute for proper adult supervision, and should not be used as such. Test your baby monitor You may test the baby monitor before initial use, and at regular times thereafter. CAUTION For hearing protection, make sure the parent unit is more than 3 feet (1 meter) away from both baby units. If you hear any high-pitched noise, move the parent unit further until the noise stops. You can also press VOL on the parent unit to lower or mute the noise. Positioning the baby monitor CAUTION Keep the baby unit out of the reach of your baby. Never place or mount the baby unit inside the babys crib or playpen. NOTE To avoid interference from other electronic devices, place your baby monitor far away from devices such as wireless routers, microwaves, cell phones and computers. 1. Place the baby units more than 3 feet

(1 meter) away from your baby.

> 3ft (1m) 2.

> 3 feet (1meter) The battery icon becomes solid

. 1 set for VM2251 2 sets for VM2251-2 Users manual Light sensor 4 ON/OFF switch Slide to turn on or off the baby unit. Speaker Power jack Connects with AC power adapter. 1 2 3 4 5 6 10 11 Parent unit overview 1 Power indicator TALK Green when the parent is powered on. Flashes green when no link to camera. Press and hold to talk to the selected baby unit in SINGLE-CAM or PATROL mode. 5 6 7 8 7 8 9 12 13 2 3 Arrow keys and VOL / VOL VOL Press to increase the parent unit speaker volume. While in a menu, press to scroll up, or to enter an items sub-menu. While zooming in SINGLE-CAM or PATROL mode, press and hold to move the zoomed image upward VOL Press to decrease the parent unit speaker volume. While in a menu, press to scroll down. While zooming in SINGLE-CAM or PATROL mode, press and hold to move the zoomed image downward. While in a menu, press to choose the next item on the left. While zooming in SINGLE-CAM and PATROL mode, press and hold to move the zoomed image leftward. While in a menu, press to choose the next item on the right. While zooming in SINGLE-CAM or PATROL mode, press and hold to move the zoomed image rightward. 5 6 MIC Battery indicator Red when battery is charging. Flashes red when battery is low. 7 Visual sound indicator Parent unit status icons Parent unit main menu icons The visual sound indicator can show the sound level detected by the baby unit. Sound level detected by the baby unit One to three green lights indicate a moderate sound level detected by the baby unit. 8 Additional red lights indicate a higher sound level detected by the baby unit (e.g. baby crying loudly). Zoom Press to zoom in or out while viewing image in SINGLE-CAM or PATROL mode. Main screen 9 10 Speaker 11 Stand 12 ON/OFF switch Slide to turn on or off the parent unit. 13 Power jack Connection status or displays when strong signal strength is detected between the baby unit and the parent unit. or displays when or moderate or low signal strength is detected between the baby unit and the parent unit. displays when the link between the baby unit and the parent unit is lost. Patrol mode Displays when the parent unit is in PATROL mode. or or or Current view status Displays the baby unit number that is being viewed when in SINGLE-CAM or PATROL mode. Zoom Displays when the camera at the baby unit has zoomed in. Night vision Displays when the baby unit being viewed has activated the night vision feature. Mute alert Displays when the parent unit speaker volume is set to off. or Real-time temperature Displays the real-time temperature detected by the baby unit in Fahrenheit (oF) or Celsius (oC)

(e.g. 57 oF or 14 oC). Battery status animates when the battery is charging. displays solid when the battery is fully charged. displays when the battery is low and needs charging. Speaker volume Displays the parent unit speaker volume level while adjusting. Monitoring mode You can enter the monitoring mode to view the video from the baby unit. Brightness You can change the brightness of the parent unit screen. LCD screen off timer You can set a specific time to turn the screen off. VOX Sensitivity With this feature, you can choose to hear sounds from the baby unit all the time, or to hear sounds that exceed a certain level. You can use the parent unit to adjust the microphone sensitivity of your baby unit. The higher the sensitivity level, the more sensitive the baby unit is in detecting sounds for transmitting to the parent unit. Sound-activated screen Automatically turns on the parent unit screen when a baby unit detects a sound after the screen is turned off. When no sound is detected, the screen is automatically off to save power. Temperature You can turn on the temperature alert tone so that the parent unit beeps whenever the room temperature detected by the baby unit falls outside of the desired temperature range. You can also set the temperature format to display the real-time temperature in babys room, or set the maximum/minimum temperature limit for alerts. MENU/SELECT Press to enter or exit the menu. While in a sub-menu, press to choose an item, or save a setting. Operating range The operating range of the baby monitor is up to 1000 feet (300 meters) outdoors or 160 feet (50 meters) indoors. The actual operating range may vary depending on the environmental conditions and other interferences such as walls, doors and other obstructions. Overview Baby unit overview 1 3 4 5 3 4 5 7 8 8 9 2 1 2 6 6 7 1 2 PAIR button Power indicator On when the baby unit is turned on and is paired to the parent unit. Flashes when the baby unit is not being viewed; or when the link to the parent unit is lost. 3 Microphone 4 Camera NOTE If one or more paired baby units are powered off or disconnected during patrolling, the parent unit will keep searching until its power has run out or a baby unit is connected once again Screen off timer You can set the screen off time for the parent unit so that the screen will be automatically turned off after it is idle for a specific time interval. When the screen is turned off, you can still hear sound from the baby unit. 1. 2. 3. or to choose

, then press to enter the main menu when Press the parent unit is idle. Press open the submenu. Press period to automatically turn off screen

(

then press and return to idle screen. to choose the desired time to confirm your selection

- 30 min. /

- 5 min./

or

/

- 60min.), to VOX (sound-activated) sensitivity You can choose to hear sounds from the baby unit all the time, or to hear sounds that exceed a designated level. You can use the parent unit to adjust the microphone sensitivity of your baby unit. The higher the VOX sensitivity level, the more sensitive the baby unit is in detecting sounds for transmitting to the parent unit. The VOX sensitivity level is preset to the highest level

(Level 5). Place the parent unit more than 3 feet

(1 meter) away from the baby units. 3ft (1m) 3ft (1m) 3. Adjust the angle of the baby unit camera to aim at your baby. CAUTION The default volume of your parent unit is level 3. If you experience high-pitched screeching noise from your baby monitor while positioning:

-

Make sure your baby units and parent unit are more than 3 feet (1 meter) apart, OR Turn down the volume of your parent unit.

-

Adjust LCD brightness You can change the brightness of the parent unit screen from Level 1 to Level 5. The LCD brightness is preset to Level 3. 1. 2. 3. Press Press Press brightness, then press selection. when the parent unit is idle.

, then press to choose to choose the desired level of to confirm your or or

. Monitoring mode Every time the parent unit is turned on, it displays a baby unit in SINGLE-CAM mode. If there are more two baby units in your system, you can also monitor your baby in PATROL mode. SINGLE-CAM The screen displays image of a single baby unit in full screen. A single cam view that transits to a different baby unit every 10 seconds. to enter the main menu. Change monitoring mode To change the monitoring mode from SINGLE to PATROL mode:

1. 2. Press Press open the submenu. Press mode to alternately view the image from one baby unit to the next one in every 10 seconds.

, then press to enter PATROL to choose to select or or 3. to To change the monitoring mode from PATROL to SINGLE mode:

1. 2. to enter the main menu.

, then press to choose or to to select a camera number to Press Press open the submenu. Press enter SINGLE mode. or 1. 2. Make sure your baby unit and parent unit are on. The parent unit displays images from the baby unit. Speak towards the microphone of the baby unit. You will hear the sound at the parent unit. 3. If you have two baby units, view the image from one of them by switching cameras via menu. Then, repeat step 2. No link to NOTES When the parent unit displays Camera, and the POWER LED light flashes, move the parent unit closer to the baby units

(observe the minimum distance of 3 feet /

1 meter). You can also check if the baby monitor is connected to a live power socket and switched on. TIP Increase the speaker volume of the parent unit if you cannot hear the sounds transmitted from the baby units. Parent unit warning icons and messages

/No link to Camera The selected baby unit is out of range or is turned off.

/Battery low at Parent Unit The battery is empty and needs to be recharged. The parent unit is searching for baby units.

/Temperature too high or

/Temperature too low The temperature detected by the baby unit is higher/lower than the desired temperature alert range. The parent unit is searching for baby units.

* # represents the selected baby unit number. PATROL Using the baby monitor Power on or off the baby unit ON/OFF switch up to turn on Slide the the baby unit. The POWER LED light turns on. ON/OFF switch down to turn Slide the off the baby unit. The POWER LED light turns off. Power on or off the parent unit Slide the ON/OFF switch to ON to turn on the parent unit. The screen and the POWER LED light turns on. Slide the ON/OFF switch to OFF turn off the parent unit. The screen and the POWER LED light turns off. Adjust parent unit speaker volume Press VOL /VOL on the parent unit to adjust the speaker volume. 3. NOTE When the parent unit speaker volume is set to off, appears on the screen. VOX sensitivity level table for reference Display

(Level 5) Sensitivity High Sensitivity

(Level 4)

(Level 3)

(Level 2)

(Level 1) Low Sensitivity Description Highest VOX sensitivity level The parent unit speaker is constantly on, and you will hear all sounds (including background noises) from your babys room. High VOX sensitivity level The parent unit speaker turns on for soft babbling and louder sounds from your baby. It remains quiet when your baby sleeps soundly. Medium VOX sensitivity level The parent unit speaker turns on for loud babbling and louder sounds from your baby. It remains quiet when your baby makes soft sounds Low VOX sensitivity level The parent unit speaker turns on for crying and louder sounds from your baby. It remains quiet when your baby makes soft sounds. Lowest VOX sensitivity level The parent unit speaker turns on for loud crying or screeching sounds from your baby. It remains quiet when your baby makes soft sounds. Precautions for users of implanted cardiac pacemakers Cardiac pacemakers (applies only to digital cordless devices):

Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless devices and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that:

Pacemaker patients Should keep wireless devices at least six inches from the pacemaker. Should NOT place wireless devices directly over the pacemaker, such as in a breast pocket, when it is turned ON. WTRs evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless devices. Electromagnetic fields (EMF) This VTech product complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this users manual, the product is safe to be used based on scientific evidence available today. The RBRC seal The RBRC seal on the Ni-MH battery indicates that VTech Communications, Inc. is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful lives, when taken out of service within the United States and Canada. The RBRC program provides a convenient alternative to placing used Ni-MH batteries into the Ni-MH batteries into the batteries into the trash or municipal waste, which may be illegal in your area. VTechs participation in RBRC makes it easy for you to drop off the spent battery at local retailers participating in the RBRC program or at authorized VTech product service centers. Please call 1 (800) 8 BATTERY for information on Ni-MH Ni-MH battery recycling and disposal bans/restrictions in your area. VTechs involvement in this program is part of its commitment to protecting our environment and conserving natural resources. RBRC and 1 (800) 8 BATTERY are registered trademarks of the Rechargeable Battery Recycling Corporation. 1. 2. 3. or to enter the main menu when the to choose Press parent unit is idle. Press open the submenu. Press to choose the desired level

(refer to the VOX sensitivity level table), to confirm your selection then press and return to idle screen.

, then press to or NOTE If the screen is off, and the setting of sound-activated screen is ON, then LCD screen will be turned on automatically when VOX sensitivity is triggered. Sound-activated screen When sound activation is on, as long as no sound is detected within 50 seconds, the parent unit screen will turn off automatically to save power. When your baby unit detects a sound, which exceeds the selected sensitivity level, the sound activation triggers the parent unit screen to turn on automatically. When no sound is detected within 50 seconds, the screen will be off again.

, then press to to enter the main menu. 1. 2. 3. to choose or Press Press open the submenu. Press or or

, then press to set the function as to confirm your selection and return to idle screen. Zoom You can zoom in while viewing images from the baby unit in SINGLE-CAM and PATROL mode. to zoom in. or Press Press upward or downward. Press leftward or rightward. or to move the zoomed image to move the zoomed image Press again to zoom out. Talk You can use the TALK function of the parent unit to comfort your baby in SINGLE-CAM and PATROL mode. Press and hold TALK on the parent unit. FCC and IC regulations FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. Caution: This Transmitter must be installed to provide a separation distance of at least 20cm from all persons. The transmitter and antenna of the parent unit shall be held at least 1 in (2.5 cm) from your face. This Class B digital apparatus complies with Canadian requirement:

CAN ICES-3 (B)/NMB-3(B) Industry Canada This device complies with Industry Canada licence-

exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference, including interference that may cause undesired operation. The term IC: before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications. 1. 2. Speak towards the microphone on the parent unit. Your voice is broadcast to the baby unit. Release the TALK key to stop the broadcast. Monitor the temperature Your baby unit monitors the temperature of your babys room with its built-in temperature sensor. If the detected temperature is out of the preset temperature range, the parent unit will display an alert message. Set temperature range You can set the desired room temperature alert range for the minimum temperature or the maximum temperature. 1. 2. 3. 4. 5. to choose to choose to choose when the parent unit is idle.

, then press

, then press or

, then Press Press Press Press press Press minimum or maximum temperature, then press to confirm your selection. to choose the desired or or or

. or General product care To keep this product working well and looking good, follow these guidelines:

Avoid putting it near heating appliances and devices that generate electrical noise (for example, motors or fluorescent lamps). DO NOT expose it to direct sunlight or moisture. Avoid dropping the product or treating it roughly. Clean with a soft cloth. DO NOT immerse the parent unit and the baby unit in water and do not clean them under the tap. DO NOT use cleaning spray or liquid cleaners. Make sure the baby unit and parent unit are dry before you connect them to the mains again. Storage When you are not going to use the baby monitor for some time, store the parent unit, the baby unit and the adapters in a cool and dry place. Frequently asked questions Below are the questions most frequently asked about the baby monitor. If you cannot find the answer to your question, visit our website at www.vtechphones.com, or contact 1 (800) 595-9511 for customer service. Temperature alert tone You can turn on the temperature alert tone so that the parent unit will emit an alert tone if the detected temperature is out of range. Why does the baby monitor not respond normally?

1. 2. 3. 4. Press Press Press Press press when the parent unit is idle.

, then press

, then press or

, then to choose to choose to choose or or or to confirm your selection. Temperature format You can choose to display the temperature in Fahrenheit (oF) or Celsius (oC). 1. 2. 3. 4. Press Press Press Press press when the parent unit is idle.

, then press

, then press

, then or to choose to choose to choose or or or to confirm your selection. FCC RF radiation exposure statement Caution: This Transmitter must be installed to provide a separation distance of at least 20cm from all persons. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies also with Industry Canada RSS-102 with respect to Canadas Health Code 6 for Exposure of Humans to RF Fields. California Energy Commission battery charging testing mode This baby monitor meets the California Energy Commission (CEC) regulations for energy consumption. Your baby monitor is set up to comply with the energy-conserving standards right out of the box. Follow the instructions to install and charge the battery. The CEC battery charging testing mode is activated while charging. Even if the parent unit is paired to baby units, the CEC battery charging testing mode is activated while it is powered off and charging. For C-UL compliance only Mesures de scurit importantes Lorsque vous utilisez votre appareil, vous devriez toujours suivre certaines mesures de prcaution de base afin de rduire les risques dincendie, dlectrocution et de blessures corporelles, dont ceux qui suivent :

1. Observez toutes les instructions et mises en garde inscrites sur lappareil. Linstallation par un adulte est requise. Ce produit a t conu pour tre un dispositif dappoint seulement. Il nest pas le remplacement dune supervision responsable et adquate par un adulte et ne devrait pas tre utilis comme telle. Ce produit nest pas conu pour tre utilis en tant que moniteur mdical. Nutilisez pas cet appareil prs de leau ni de toute autre source dhumidit, par exemple, prs dune baignoire, cuve lessive, vier de cuisine, dans un sous-sol humide ni prs dune piscine, dans un soussol humide ou une douche. MISE EN GARDE: Utilisez uniquement les piles fournies. Il existe un risque dexplosion si un autre type de batterie est utilis pour lunit Parents. Nincinrez pas les piles. Celles-ci risqueraient dexploser. Jetez les piles uses selon les renseignements suivant le sceau du RBRC. Nutilisez que les adaptateurs inclus avec ce produit. Lutilisation dun adaptateur dont la polarit ou la tension serait inadquate risque dendommager srieusement le produit et mettre votre scurit en pril. Adaptateur de lunit du bb :

Sortie : 6V CC 400mA Adaptateur de lunit du parent :

Sortie : 6V CC 400mA 2. 3. 4. 5. 6. 7. Try the following (in the order listed) for common cure:

1. Disconnect the power to the baby units and the parent unit. 2. Wait a few seconds before connecting power back to the baby units and the parent unit. 3. Turn on the baby units and the parent unit. 4. Wait for the parent unit to synchronize with the baby units. Allow up to one minute for this to take place. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. Lorsquils sont branchs dans une prise de courant, les adaptateurs secteur ont t conus pour tre orients correctement, soit la verticale ou au plancher. Les broches nont pas t conues pour supporter le poids du bloc dalimentation et le maintenir en place si celuici est branch dans une prise au plafond, sous une table ou dans un meuble. Pour les PRODUITS BRANCHER UNE PRISE DE COURANT, la prise de courant doit tre installe prs du produit, afin dassurer une accessibilit scuritaire la prise de courant. Dbranchez ce produit de la prise de courant avant de procder au nettoyage. Nutilisez pas de nettoyants en arosols. Utilisez un chiffon humide pour le nettoyer. Dbranchez les cordons dalimentation avant de remplacer le bloc-piles. Ne coupez pas les cordons dalimentation pour remplacer les fiches, car ceci peut prsenter un danger potentiel. Ne laissez aucun objet reposer ni appuyer sur le cordon dalimentation. Ninstallez pas cet appareil dans un endroit o lon risque dcraser le cordon dalimentation ou de le pitiner. Ne faites fonctionner cet appareil quavec le type dalimentation indiqu sur ltiquette. Si vous ne connaissez pas le type dalimentation que vous possdez votre domicile, consultez votre marchand ou votre compagnie locale dlectricit. Ne surchargez pas les prises de courant murales ni les rallonges lectriques. Ne placez pas cet appareil sur un chariot, meuble, trpied, support de montage ni table chancelants. Les trous et ouvertures du botier, situs larrire de lappareil ou sous celui-ci, servent arer lappareil. Pour lempcher de surchauffer, ne bloquez sous aucun prtexte ces ouvertures et nempchez pas laration adquate de lappareil en le plaant sur un lit, divan, tapis ou toute autre surface similaire. De mme, ne le positionnez pas proximit ni au-dessus dune source de chaleur ou dun calorifre. De plus, ne placez pas lappareil dans un endroit avant de vous assurer quil y ait une bonne circulation dair. Nenfoncez jamais dobjets travers les ouvertures de cet appareil, car ils pourraient entrer en contact avec des points de tension dangereux ou causer des courts-circuits qui peuvent dgnrer en incendies ou en risques dlectrocution. Ne renversez jamais de liquide dans ce produit. Afin de rduire les risques dlectrocution, ne dmontez pas cet appareil, mais apportez-le dans un centre de service autoris. Louverture du botier ou le retrait de toutes pices que contient cet appareil, lexception de laccs autoris certaines portes ou ouvertures, risque de vous exposer des points de tension dangereux ou dautres dangers. Un remontage incorrect peut par la suite prsenter des risques dlectrocution. Vous devriez tester la rception chaque fois que vous mettez lappareil en fonction. Examinez les composantes afin de vrifier si celles-ci ne sont pas endommages. Soyez avis de la perte de la confidentialit lorsque vous utilisez les ondes publiques. Les Why dont the power-on light of the baby unit and parent unit go on when I switch on the units?

Why doesnt my parent unit charge while connected to AC power?

Why is my screen in black and white?

Why do I get glare or blurry display on my screen when viewing my baby at night?

Why does the baby monitor produce a high-pitched noise?

Why does the parent unit beep?

Perhaps the parent unit is not connected to the power. Insert the appliance plug into the parent unit and put the adapter in a wall socket. Then press and hold the ON/OFF to switch on the parent unit and to establish connection with the baby unit. Perhaps the baby unit is not connected to the power. Insert the appliance plug into the baby unit and put the adapter in a wall socket. Then slide the ON/OFF switch to ON to switch on the baby unit and to establish connection with the parent unit. Make sure the power is not controlled by a wall switch. The screen is in black and white during night-time or in a dark room when the night vision feature is activated. This is normal due to external light sources. During night-time or in a dark room, the surroundings and other interfering factors, like lightings, objects, colors and backgrounds may affect the image quality on your parent unit screen. Adjust the baby units angle or place the baby unit at a higher level to prevent glare and blurry display. The parent unit and baby units may be too close to each other. Move the parent unit away from the baby units until the noise stops; OR Turn down the volume of your parent unit. The baby units may be out of range. Move the parent unit closer to the baby units (but not less than 3 feet). The parent unit may not have enough charge for the parent unit to perform normally. Charge the battery in the parent unit for up to 11 hours. The temperature of your babys room may be too high or too low. 23. 24. conversations peuvent tre entendues par dautres moniteurs de bb, des tlphones sans fil, des scanneurs, etc. Les enfants devraient tre superviss afin de vous assurer quils ne jouent pas avec lappareil. Le produit nest pas conu pour tre utilis par des personnes (incluant des enfants) aux capacits physiques, sensorielles ou mentales rduites ou qui manquent dexprience et de connaissances, moins quon leur ait donn suffisamment de supervision ou dinstructions relativement lutilisation de lappareil par une personne responsable de leur scurit. CONSERVEZ CES INSTRUCTIONS Mises en garde 1. 2. 3. 4. 5. 6. Utilisez et entreposez le produit une temprature entre 0 C (32F) et 40C (104 F). Nexposez pas cet appareil des froids ou des chaleurs extrmes, ainsi qu la lumire directe du soleil. Ne linstallez pas prs dune source de chauffage. Le bloc-piles ne doit pas tre expos la chaleur excessive telle que la lumire du soleil ou au feu. Assurez-vous que le moniteur et le cordon de ladaptateur sont toujours hors de porte des enfants, au moins 1 mtre (3 pieds) de lenfant ou du berceau, pour viter tout risque de strangulation. Ne jamais placer le moniteur lintrieur du berceau ou du parc de bb. Ne jamais couvrir le moniteur ou lunit (s) portative avec un article tel une serviette ou une couverture. Dautres quipements lectroniques peuvent produire des interfrences sur votre moniteur vido et audio. Tentez dinstaller votre moniteur vido ou audio lcart des appareils lectroniques tels que des routeurs sans fil, radios, tlphones cellulaires, interphones, moniteurs, tlphones, ordinateurs personnels, lectromnagers et tlphones sans fil. Stimulateurs cardiaques implants dans lorganisme Les simulateurs cardiaques (ne sapplique quaux dispositifs numriques sans fil) :

Lorganisme Wireless Technology Research, LLC

(WTR), une firme de recherche indpendante, a men une valuation pluridisciplinaire des interfrences entre les tlphones sans fil portatifs et les stimulateurs cardiaques implants dans lorganisme. Appuye par lAdministration des aliments et drogues (FDA) des tats-Unis, la firme WTR recommande aux mdecins:

Avis aux dtenteurs de stimulateurs cardiaques Vous devriez maintenir les dispositifs sans fil au moins six pouces du simulateur cardiaque. Ils ne doivent PAS placer le tlphone sans fil directement sur le stimulateur cardiaque, tel que dans une poche de chemise, lorsque celui-ci est en marche. Ltude effectue par lorganisme WRS na pas identifi de risque pour les dtenteurs de simulateurs cardiaques causs par les gens qui utilisent dispositifs sans fil proximit de ceux-ci. The POWER light on the baby unit flashes and the parent unit displays If you have accidentally unpaired your baby unit from the parent unit, follow below steps to pair the baby unit. Make sure both parent unit and baby unit are on before pairing. I have accidentally unpaired my baby unit. 1. 2. 3. 4. to enter the main Press menu. Press or to choose

, then press to open the or to choose an submenu. Press empty baby unit slot ( , , or

), then press

. The parent unit screen displays Press PAIR on the side of the baby unit. The POWER LED light at the front of baby unit flashes quickly when pairing. When pairing is successful, the parent unit screen displays and the POWER light turns on. The view of the newly paired baby unit in SINGLE-CAM mode will be shown on the parent unit. The POWER LED light on the new baby unit remains on. Try the pairing If pairing fails, the screen displays process again. Only one baby unit can be paired at a time. The parent unit speaker volume may be too low or off. Press VOL to increase the volume, or use the parent unit menu to change VOX sensitivity level to the highest level (level 5). The baby units may be out of range. Move the parent unit closer to the baby units (but not less than 3 feet). Other electronic products may cause interference with your baby monitor. Try installing your baby monitor as far away from these electronic devices as possible. Why dont I hear a sound/Why cant I hear my baby cry?

Why cant I establish a connection?

Why is the connection lost every now and then? Why are there sound interruptions?

Champs lectromagntiques (EMF) Ce produit de VTech est conforme toutes les normes se rapportant aux champs lectromagntiques (EMF) standard. Si vous le manipulez correctement en suivant les instructions de ce guide, son utilisation sera scuritaire pendant de nombreuses annes, selon les meilleures vidences scientifiques dont nous disposons aujourdhui. aujourdhui. Limited warranty What does this limited warranty cover?

The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase (Consumer or you) that the Product and all accessories provided in the sales package (Product) are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the Product operating instructions. This limited warranty extends only to the Consumer for Products purchased and used in the United States of America and Canada. What will VTech do if the Product is not free from defects in materials and workmanship during the limited warranty period (Materially Defective Product)?

During the limited warranty period, VTechs authorized service representative will repair or replace at VTechs option, without charge, a Materially Defective Product. If we repair the Product, we may use new or refurbished replacement parts. If we choose to replace the Product, we may replace it with a new or refurbished Product of the same or similar design. We will retain defective parts, modules, or equipment. Repair or replacement of the Product, at VTechs option, is your exclusive remedy. VTech will return the repaired or replacement Products to you in working condition. You should expect the repair or replacement to take approximately 30 days. How long is the limited warranty period?

The limited warranty period for the Product extends for ONE (1) YEAR from the date of purchase. If VTech repairs or replaces a Materially Defective Product under the terms of this limited warranty, this limited warranty also applies to the repaired or replacement Product for a period of either (a) 90 days from the date the repaired or replacement Product is shipped to you or (b) the time remaining on the original one-year warranty; whichever is longer. What is not covered by this limited warranty?

This limited warranty does not cover:

1. Product that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water or other liquid intrusion; or 2. Product that has been damaged due to repair, alteration or modification by anyone other than an authorized service representative of VTech; or Important safety instructions When using your equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following:

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Follow all warnings and instructions marked on the product. Adult setup is required. This product is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such. This product is not intended for use as a medical monitor. Do not use this product near water. For example, do not use it next to a bath tub, wash bowl, kitchen sink, laundry tub or swimming pool, or in a wet basement or shower. CAUTION: Use only the batteries provided. There may be a risk of explosion if a wrong type of battery is used for the parent unit. Do not dispose of batteries in a fire. They may explode. Dispose of used battery according to the information in The RBRC seal. Use only the adapters included with this product. Incorrect adapter polarity or voltage can seriously damage the product. Baby unit power adapter: Output: 6V DC 400mA Parent unit power adapter: Output: 6V DC 400mA. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet. For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Unplug the power cords before replacing batteries. Do not cut off the power adapters to replace them with other plugs, as this causes a hazardous situation. Do not allow anything to rest on the power cords. Do not install this product where the cords may be walked on or crimped. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult your dealer or local power company. Do not overload wall outlets or use an extension cord. Do not place this product on an unstable table, shelf, stand or other unstable surfaces. This product should not be placed in any area where proper ventilation is not provided. Slots and openings in the back or bottom of this product are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft 18. 19. 20. 21. 22. 23. 24. surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat register. Never push objects of any kind into this product through the slots because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the product other than specified access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used. You should test the sound reception every time you turn on the units or move one of the components. Periodically examine all components for damage. Be aware of possible loss of privacy while using public airwaves. Conversations may be picked up by other nursery monitors, cordless phones, scanners, etc. Children should be supervised to ensure that they do not play with the product. The product is not intended for use by persons

(including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. SAVE THESE INSTRUCTIONS Cautions 1. 2. 3. 4. 5. Use and store the product at a temperature between 32oF and 104oF. Do not expose the product to extreme cold, heat or direct sunlight. Do not put the product close to a heating source. Batteries should not be exposed to excessive heat such as bright sunshine or fire. WarningStrangulation HazardChildren have STRANGLED in cords. Keep this cord out of the reach of children (more than 3 ft

(0.9 m) away). Do not remove this tag. Never place the baby unit(s) inside the babys crib or playpen. Never cover the baby unit(s) or parent unit with anything such as a towel or a blanket. 6. Other electronic products may cause interference with your baby monitor. Try installing your baby monitor as far away from these electronic devices as possible:

wireless routers, radios, cellular telephones, intercoms, room monitors, televisions, personal computers, kitchen appliances and cordless telephones. 3. Product to the extent that the problem experienced is caused by signal conditions, network reliability, or cable or antenna systems; or 4. Product to the extent that the problem is caused by use with non-VTech accessories; or 5. Product whose warranty/quality stickers, product serial number plates or electronic serial numbers have been removed, altered or rendered illegible; or 6. Product purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for commercial or institutional purposes (including but not limited to Products used for rental purposes); or 7. Product returned without a valid proof of purchase

(see item 2 on the following part); or 8. Charges for installation or set up, adjustment of customer controls, and installation or repair of systems outside the unit. How do you get warranty service?

To obtain warranty service in the USA, please visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377. NOTE: Before calling for service, please review the users manual - a check of the Products controls and features may save you a service call. Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the Product(s) to the service location. VTech will return repaired or replaced Product under this limited warranty. Transportation, delivery or handling charges are prepaid. VTech assumes no risk for damage or loss of the Product in transit. If the Product failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, VTech will notify you and will request that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for the repair of Products that are not covered by this limited warranty. What must you return with the Product to get warranty service?

1. Return the entire original package and contents including the Product to the VTech service location along with a description of the malfunction or difficulty; and Include a valid proof of purchase (sales receipt) identifying the Product purchased (Product model) and the date of purchase or receipt; and Provide your name, complete and correct mailing address, and telephone number. 2. 3. specific legal rights, and you may also have other rights, which vary from state to state or province to province. Limitations: Implied warranties, including those of fitness for a particular purpose and merchantability (an unwritten warranty that the Product is fit for ordinary use) are limited to one year from the date of purchase. Some states/provinces do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event shall VTech be liable for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost profits or revenue, inability to use the Product or other associated equipment, the cost of substitute equipment, and claims by third parties) resulting from the use of this Product. Some states/

provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Please retain your original sales receipt as proof of purchase. Technical specifications Frequency control Transmit frequency Crystal controlled PLL synthesizer Baby unit: 2407.5 - 2475 MHz Parent unit: 2407.5 - 2475 MHz Channels 21 LCD Nominal effective range Power requirements 2.4 Color LCD

(WQVGA 320x240 pixel) Maximum power allowed by FCC and IC. Actual operating range may vary according to environmental conditions at the time of use. Parent unit: 3.6V Ni-MH battery Baby unit power adapter:

Output: 6V DC @ 400mA Parent unit power adapter:

Output: 6V DC @ 400mA Other limitations This warranty is the complete and exclusive agreement between you and VTech. It supersedes all other written or oral communications related to this Product. VTech provides no other warranties for this Product. The warranty exclusively describes all of VTechs responsibilities regarding the Product. There are no other express warranties. No one is authorized to make modifications to this limited warranty and you should not rely on any such modification. State/Provincial Law Rights: This warranty gives you Specifications are subject to change without notice. 2017 VTech Communications, Inc. All rights reserved. 10/17. VM2251-X_CIB_V2 Document order number: 91-010824-020-100