FCC ID: EW780-1707-00 Wireless Conference Phone with Two Wireless Mics - Base Unit

ErisStationTM Wireless Conference System Wireless Conference Phone with Two Wireless Mics VCS712 Quick Start Guide 1 2ABC 3DEF 4GHI 5JKL 6MNO 7PQRS 8TUV 9WXYZ a A LINK 0

#

ErisStation ARTWORKS SPECIFICATION _ VCS712 2W Speaker box K. Yongsun Pantone 8001C Silver VCS712 2W Base AW K.Yongsun | 10. OCT. 2018 | Revision 1.0 K.Yongsun | 02. NOV. 2018 | Revision 5.0 Important safety instructions When using your ErisStation Wireless Conference Phone with Two Wireless Mics , basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:

1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this product near water such as near a bathtub, wash bowl, kitchen sink, laundry tub or swimming pool, or in a wet basement or shower. 5. Do not place this product on an unstable table, shelf, stand or other unstable surfaces. 6. Slots and openings in the back or bottom of the base unit and wireless mic are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat register. This product should not be placed in any area where proper ventilation is not provided. 7. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your office, consult your dealer or local power company. 8. Do not allow anything to rest on the power cord. Do not install this product where the cord may be walked on. 9. Never push objects of any kind into this product through the slots in the base unit or wireless mic because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product. 10. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the base unit or wireless mic other than specified access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used. 11. Do not overload wall outlets and extension cords. 12. Unplug this product from the wall outlet and refer servicing to an authorized service facility under the following conditions:

A. When the power supply cord or plug is damaged or frayed. B. If liquid has been spilled onto the product. C. If the product has been exposed to rain or water. D. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operation instructions. Improper adjustment of other controls may result in damage and often requires extensive work by an authorized technician to restore the product to normal operation. 2 E. If the product has been dropped and the base unit and/or wireless mic has been damaged. F. If the product exhibits a distinct change in performance. 13. Avoid using the ErisStation Wireless Conference Phone with Two Wireless Mics during an electrical storm. There is a remote risk of electric shock from lightning. 14. Do not use the ErisStation Wireless Conference Phone with Two Wireless Mics to report a gas leak in the vicinity of the leak. Under certain circumstances, a spark may be created when the adapter is plugged into the power outlet, or when the wireless mic is replaced in its cradle. This is a common event associated with the closing of any electrical circuit. The user should not plug the phone into a power outlet, and should not put a charged wireless mic onto the charging cradle, if the phone is located in an environment containing concentrations of flammable or flame-supporting gases, unless there is adequate ventilation. A spark in such an environment could create a fire or explosion. Such environments might include: medical use of oxygen without adequate ventilation; industrial gases (cleaning solvents; gasoline vapors; etc.); a leak of natural gas; etc. 15. Only put the wireless mic next to your mouth when it is in normal talk mode. 16. The power cables are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling or cabinet outlet. 17. For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible. 18. CAUTION: Use only the batteries indicated in this manual. There may be a risk of explosion if a wrong type of battery is used. Use only the supplied rechargeable battery or replacement battery pack. Do not dispose of batteries in a fire. They may explode. Dispose of used battery according to the information in The RBRC seal. 19. Use only the adapter included with this product. Incorrect adapter polarity or voltage can seriously damage the product. SAVE THESE INSTRUCTIONS Battery CAUTION: Use Only Supplied Battery. Do not dispose of the battery in a fire. Check with local waste management codes for special disposal instructions. Do not open or mutilate the battery. Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed. Exercise care in handling batteries in order not to create a short circuit with conductive materials. Charge the battery provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual. 3 Precautions for users of implanted cardiac pacemakers Cardiac pacemakers (applies only to digital cordless telephones):

Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless telephones and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that:

Pacemaker patients Should keep the wireless telephone at least six inches from the pacemaker. Should NOT place wireless telephones directly over the pacemaker, such as in a breast pocket, when it is turned ON. Should use the wireless telephone at the ear opposite the pacemaker. WTRs evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless telephones. About wireless mics Privacy: The same features that make a wireless mic convenient create some limitations. Calls on conference phones are transmitted between the base unit and the wireless mic by radio waves, so there is a possibility that the wireless mic conversations could be intercepted by radio receiving equipment within range of the wireless mic. For this reason, you should not think of conference phone conversations as being as private as those on corded telephones. Electrical power: The base unit of this conference phone must be connected to a working electrical outlet. The electrical outlet should not be controlled by a wall switch. Calls cannot be made from the conference phone if the base unit is unplugged, switched off or if the electrical power is interrupted. Potential TV interference: Wireless mic operates at frequencies that may cause interference to televisions and VCRs. To minimize or prevent such interference, do not place the base unit near or on top of a TV or VCR. If interference is experienced, moving the wireless mic farther away from the TV or VCR often reduces or eliminates the interference. Rechargeable batteries: Exercise care in handling batteries in order not to create a short circuit with conducting material such as rings, bracelets and keys. The battery or conductor may overheat and cause harm. Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe manner. Do not burn or puncture. Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury. 4 Compliance FCC part 15 This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation; if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one of the following measures:

1. 2. 3. Reorient or relocate the receiving television or radio antenna. Increase the separation between the telephone equipment and the receiver.) Connect the telephone equipment into an outlet on a circuit different from that to which the television, radio or other receiver is connected. 4. Consult the dealer or an experienced Radio/TV Technician for help. Privacy of communications may not be ensured when using this phone. Warning: Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Caution: To maintain the compliance with the FCCs RF exposure guideline, place the base station at least 20 cm from nearby persons. The VCS712 base station has been tested and meets the FCC RF exposure guidelines when used with the accessories supplied or designated for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments

(ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US:AAAEQ##TXXXX. This identifier must be provided to your telephone service provider upon request. The plug and jack used to connect this equipment to premises wiring and the 5 telephone network must comply with applicable Part 68 rules and technical requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. An RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two lines. See the installation instructions in the users manual. The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone line and still have them ring when you are called. The REN for this product is encoded as the 6th and 7th characters following the US: in the product identifier (e.g., if ## is 03, the REN is 0.3). In most, but not all areas, the sum of all RENs should be five (5.0) or less. For more information, please contact your telephone service provider. This equipment must not be used with Party Lines. If you have specially wired alarm dialing equipment connected to your telephone line, ensure the connection of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone service provider or a qualified installer. If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents. For repair procedures, follow the instructions outlined under the Limited warranty. If this equipment is causing harm to the telephone network, the telephone service provider may temporarily discontinue your telephone service. The telephone service provider is required to notify you before interrupting service. If advance notice is not practical, you will be notified as soon as possible. You will be given the opportunity to correct the problem and the telephone service provider is required to inform you of your right to file a complaint with the FCC. Your telephone service provider may make changes in its facilities, equipment, operation, or procedures that could affect the proper functioning of this product. The telephone service provider is required to notify you if such changes are planned. If this product is equipped with a corded or cordless handset, it is hearing aid compatible. If this product has memory dialing locations, you may choose to store emergency telephone numbers (e.g., police, fire, medical) in these locations. If you do store or test emergency numbers, please:

Remain on the line and briefly explain the reason for the call before hanging up. Perform such activities in off-peak hours, such as early morning or late evening. 6 Industry Canada This Class B digital apparatus complies with Canadian requirements: CAN ICES-

3 (B)/NMB-3(B). Cet appareil numrique de la classe B est conforme la norme CAN ICES-3 (B)/NMB-3(B) du Canada. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Privacy of communications may not be ensured when using this telephone. The term IC: before the certification/registration number only signifies that the Industry Canada technical specifications were met. The Ringer Equivalence Number (REN) for this terminal equipment is 1.0. The REN is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all devices does not exceed five. This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. 7 Important Battery Information The detachable wireless microphones of this product use rechargeable Ni-MH 400 mAh 2.4V batteries. Use only the batteries that came with the product or contact VTech if you need replacement batteries. Do not use any other type of battery since this may lead to leakage, fire, explosion, or other dangerous situations. Never disassemble, alter, or short-circuit batteries or use them for purposes other than the intended one. Charge batteries only within the detachable wireless microphones placed in the chargers on the product. Charging and Discharging, Storage The full performance of a new batteries is achieved only after two or three complete charge and discharge cycles. The batteries can be charged and discharged hundreds of times, but they will eventually wear out. Contact VTech if you need to replace the batteries. If left unused, a fully charged battery will lose its charge over time. Use the batteries only for their intended purpose. Do not short-circuit the batteries. Short-circuiting the terminals may damage the batteries or the connecting object. Do not use a damaged charger or battery. Using a damaged battery may cause it to explode. Do not place or store the batteries, inside or outside the microphone, in the immediate vicinity of open fire or other heat sources. Leaving the batteries in hot or cold places will reduce their capacity and lifetime. Charge batteries within an ambient temperature range of +5 C to

+40 C (+41 F to +104 F), max. humidity 85%. A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Avoid overcharging. Repeated overcharging can lead to deterioration in batteries performance. Never attempt charging the batteries with reversed polarity as this may cause the gas pressure inside the batteries to rise and lead to leakages. Remove batteries if storing product for more than 1 month. Store batteries in a cool, dry place without corrosive gases. Temperature range for storage of charged batteries up to 6 months: -20 C to +45 C

(-4 F to 113 F); up to 2 years: -20 C to +35 C (-4 F to 95 F); humidity 6520%. Discharge and charge batteries every 3 months. Disposal of the device and batteries Disposal of electrical and electronic products and batteries should be done in line with local regulations. Please contact local authorities for further information. 8 Introduction This quick start guide provides you with the basic installation, setup, and operation instructions. A limited set of features are described in abbreviated form. You may refer to the users manual for complete installation and operation instructions for this innovative and feature-rich VTech product. The ErisStation Wireless Conference Phone with Two Wireless Mics is designed for use in office settings. It consists of a base station, conference phone with charging dock, and two wireless mics that enable clear conversation between participants in different areas of a meeting room. For large meeting rooms, you can extend the range of the VCS712 with a VTech VCS850 DECT expansion speakerphone. For more information on using the VCS712 DECT features, see the VCS712 Users Manual, available at businessphones.vtech.com. NOTE: The ErisStation Wireless Conference Phone with Two Wireless Mics requires a telephone line to operate. If you subscribe to digital subscriber line

(DSL) high-speed Internet service through your telephone line, you must install a DSL filter between the telephone line cord and wall jack. Contact your DSL service provider for more information about DSL filter. The ErisStation Wireless Conference Phone with Two Wireless Mics is not compatible with IP-PBX systems, unless it comes with an analog-line interface with RJ-11 connector. If you already have an IP-PBX system in place, please contact your system provider for a digital-to-

analog interface converter. The ErisStation Wireless Conference Phone with Two Wireless Mics is not a network device and is not PoE (Power over Ethernet) compatible. It does not require an ethernet network to work. Do not connect it to your ethernet network or directly with any other network devices. IMPORTANT!

Refer to the users manual for a full set of installation and operation instructions. For customer service, visit our website at businessphones.vtech.com or call 1 (888) 370-2006. 9 i n e t I S C R P T O N I Parts Checklist 1 l a e 5 0

%

S p r a y c o o r Your ErisStation Wireless Conference Phone with Two Wireless Mics package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary. C O L O U R illustration scale 100%

l G u n m e t a l

(

r e f e r t o V C S 7 6 2

) C O L O U R S i l k s c r e e n o n t h e T o p

(

)

-

P a n t o n e 8 0 0 1 C S i l v e r I S P B

-

1 T E X T U R E

/

F N S H I I Wireless Mic x2 Wireless Mic battery door x2 ErisStation ErisStation Conference Phone Quick start guide Silkscreen on the Top Pantone Cool gray 3C Users manual AW | SNOM C620 Mic Wireless Mic Battery x2 Mickey Law | 07. Jan. 2019 | Revision 1.1 Conference phone battery ARTWORKS SPECIFICATION _ VCS712 2W Speaker box K. Yongsun Version 4.0 Date : 19.OCT.2018 Pantone 427C

(x4)

(x4) LINK 2 (two) screws for Conference Phone battery door Charging dock Telephone line cord ErisStation Screwdriver Users m a n u al

(x4)

(x4) Base Station Quick start guide VCS712 2W Base AW Power adapter for base station

(modular jack) 0 2 Pantone 8001C Silver Silkscreen rear Pantone 8001 C Silkscreen rear Pantone Black C ARTWORKS SPECIFICATION _ VCS712 2W Speaker box Power Adapter for charging dock

(round jack) K.Yongsun | 10. OCT. 2018 | Revision 1.0 K.Yongsun | 02. NOV. 2018 | Revision 5.0 Date : 19.OCT.2018 Pantone 427C K. Yongsun Quick Start Guide VCS712 Version 4.0 To purchase any accessories or replacements, visit our website at businessphones.vtech.com or call 1-888-370-2006. Pantone 427C Pantone 427C ARTWORKS SPECIFICATION _ VCS712 2W Speaker box K. Yongsun Version 4.0 Date : 19.OCT.2018 10 Install the base station 1. Plug one end of the telephone line cord into the TEL LINE jack on the rear of the base station, and plug the other end into a telephone wall jack. Connect the modular jack power adapter to the base station power jack. Plug the power adapter into an electrical outlet that is not controlled by a wall switch. IMPORTANT INFORMATION Use only the modular jack power adapter provided with the product. To order a replacement power adapter, visit our website at businessphones.vtech.com or call 1 (888) 370-2006. The modular jack power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table, or cabinet outlet. 2. 3. Install the conference phone battery CAUTION: Risk of explosion! Batteries should not be exposed to excessive heat such as bright sunlight or fire. CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Use only the supplied battery. 1. 2. 3. After removing the battery door, plug the battery connector securely into the socket inside the battery compartment. Place the battery into the battery compartment with the label THIS SIDE UP facing up. Attach the battery door, and secure it in place with the provided screws. 2. 3. Connect power to the conference phone 1. Plug the round jack end of the AC adapter into the power jack on the back of the charging dock. Plug the large end of the AC adapter into a wall outlet not controlled by a switch. Place the rear connectors of the conference phone into the charging dock. The supplied round jack power adapter is designed for use only with the VCS712 conference phone. It is not designed to power other devices. Do not connect the supplied round jack power adapter to any other devices. The round jack power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table, or cabinet outlet. 11 Install the wireless mic battery Ethernet cable 1. Plug the battery connector securely into the socket inside the battery compartment. Insert the battery (with the label THIS SIDE UP facing up) into the battery compartment. 2. Slide the battery door until it clicks into place. 3. NOTE: The status indicator on the wireless mic turns orange when charging, and Place the wireless mics into the charging cradles until they are flush. turns off when the wireless mic is fully charged. 12 Status Indicators Overview Status indicator on conference phone/wireless mics 1 2ABC 3DEF 4GHI 5JKL 6MNO 7PQRS 8TUV 9WXYZ a A 0

#

ErisStation Multipurpose LED for conference phone and wireless mics Power up On a call ARTWORKS SPECIFICATION _ VCS712 2W Steady Orange for five seconds. Steady Green during a call. Speaker box K. Yongsun Version 4.0 Incoming call Steady Red when a call is muted, or if there are new messages. Flashes Green quickly when there is an incoming call. Charging Low battery Stand by Steady Orange while charging Steady Orange for five seconds when charging completed and you connect the conference phone to the charging dock. Off when charging completed. Flashes Orange slowly Off when DECT linked; conference phone is idling;

audio mode is not in use. 13 Registration Paged by base station DECT Searching Mode Reset mode CEC battery testing mode Flashes Red and Green alternately when DECT registration in progress. Steady Green for five seconds when registration successful. Steady Red for five seconds when registration failed or canceled. Flashes Green slowly Flashes Red slowly when out of range or not registered. Steady Orange Flashes Red Status indicator on the base station Power up Incoming call Line in use Deregistration Flashes Green slowly when power is just turned on. Flashes Green quickly when there is an incoming PSTN call. Steady Green when a system device / parallel set is in use with the PSTN line. Flashes Green quickly when the base is in deregistration standby mode. Steady Green for five seconds after confirmation of deregistration. Flashes Green slowly when no devices are registered. Registration Flashes Green slowly when the base is in registration mode. 14 Power Requirements Wireless Mics Conference Phone Base Station Battery: (BT183642/BT283642) 2.4V,400mAh Ni-MH Battery: (BT200660) 7.2V 4000mAh Ni-MH Charging dock power adapter: (CS36M120300FUF) Input: 100-240V AC 50/60Hz Output: 12V DC @

3000mA Power adapter:

(S003GU0600040) Input: 100-240V AC 50/60 Hz Output:

6.0V DC @ 400mA

(CS3E060040LU) Input: 100-120V AC 60Hz Output:

6.0V DC @ 400mA Registering the conference phone To register the conference phone to the base:

1. On the conference phone, press MENU and use the keypad to enter the secret code 7344. The Registration menu appears. 2. Select This speaker, then select with Base station. 3. Follow the instructions on the conference phone screen. Press NEXT to move through the screens. a. Connect the conference phone with AC power. b. Press and hold the LINK key at base for 4 seconds. c. Press the # key on the conference phone. If prompted, enter the PIN. Default PIN is 1590. The conference phone displays a message with the results:

Registration completed or Registration failed. 4. To deregister the conference phone:

1. On the conference phone, press MENU and use the keypad to enter the secret code 7344. The Registration menu appears. 2. Select Deregistration. 3. Select This speaker. 4. Select YES on the Deregister this speaker? screen. 5. Enter the PIN. Default PIN is 1590. If deregistration is successful, the conference phone displays the message

<DEVICE_NAME> is deregistered. 15 Registering the wireless mics To register the wireless mics to the base:

1. On the conference phone, press MENU and use keypad to enter the secret code 7344. The Registration menu appears. 2. Select Wireless microphone. 3. Select with Base station. 4. Follow the instructions on the conference phone screen. Press NEXT to move through the screens. a. Connect the conference phone with AC power. b. Put one wireless mic on the conference phone charge cradle c. Press and hold the LINK key at base for 4 seconds. d. Press and hold the MUTE key on the wireless mic for 3 seconds. If registration is successful, the mic LED lights up in green for 5 seconds. If registration is unsuccessful, the mic LED lights up in red for 5 seconds. To register the second wireless mic, repeat steps 2 to 4. 5. To deregister the wireless mics:

1. On the conference phone, press MENU and use keypad to enter the secret code 7344. The Registration menu appears. 2. Select Deregistration. 3. 4. Enter the PIN. Default PIN is 1590. Select Wireless microphone 1 or Wireless microphone 2. If deregistration is successful, the conference phone displays the message

<DEVICE_NAME> is deregistered. To deregister the second wireless mic, repeat steps 3 to 4. 5. 16 California Energy Commission (CEC) battery charging testing instructions This telephone is set up to comply with the energy-conserving standards right out of the box. These instructions are intended for CEC compliance testing only. When the CEC battery charging testing mode is activated, all telephone functions, except battery charging, will be disabled. These instructions assume that all devices have been registered to the base station before activating this test mode. To activate CEC battery charging testing mode:

1. 2. 3. 4. Remove the conference phone from the charging dock. Remove the battery from the conference phone. Press and hold MUTE on the conference phone. With the MUTE key pressed, insert the battery in the conference phone, and then wait for 5 seconds. When the conference phone status indicators start flashing red, release MUTE, and then press MUTE immediately. The conference phone displays the mess-age: To use the phone again, please reset the power. Put the conference phone on the charging dock to charge the conference phone battery. The battery icon battery charges. indicates the charge status as the 5. 6. To deactivate CEC battery charging testing mode:

1. 2. 3. Remove the conference phone from the charging dock. Remove the battery from the conference phone. Reinsert the battery in the conference phone without pressing any keys. 17 For cUL compliance only Mesures de scurit importantes Vous devez toujours observer des mesures de prcaution lorsque vous utilisez le Tlphone de confrence avec microphones sans fil ErisStation, afin dviter les risques dincendie, dlectrocution et de blessures, incluant ce qui suit :

1. Lisez et comprenez bien toutes les instructions. 2. Observez toutes les instructions et mises en garde inscrites sur lappareil. 3. Dbranchez ce tlphone de la prise murale avant de le nettoyer. Nutilisez pas de nettoyeurs liquides ni en arosol. Nutilisez quun chiffon doux et lgrement humect. 4. Nutilisez pas ce produit prs de leau, tel que prs dun bain, dun lavabo, dun vier de cuisine, dun bac de lavage ou dune piscine, ou dans un sous-

sol humide ou sous la douche. 5. Ne dposez pas ce tlphone sur un chariot, support ou table chancelants. Lappareil pourrait tomber et tre srieusement endommag. 6. Les ouvertures situes larrire ou sous le socle et le microphone sans fil servent la ventilation. Afin dempcher la surchauffe, ces ouvertures ne doivent pas tre obstrues en plaant lappareil sur un lit, divan, tapis ou autre surface similaires. Ne placez pas cet appareil proximit dun lment de chauffage ni dune plinthe lectrique. De plus, ne linstallez pas dans une unit murale ou un cabinet ferm qui ne possde pas daration adquate. 7. Ne faites fonctionner cet appareil quavec le type dalimentation indiqu sur les tiquettes de lappareil. Si vous ne connaissez pas le voltage de votre maison, consultez votre marchand ou votre fournisseur dlectricit. 8. Ne dposez rien sur le cordon dalimentation. Installez cet appareil dans un endroit scuritaire, l o personne ne pourra trbucher sur la ligne dalimentation ni le cordon tlphonique modulaire. 9. Nenfoncez jamais dobjets dans les fentes du socle ou du microphone sans fil, car ceci risquerait dentrer en contact avec des points de tension dangereux ou provoquer un court-circuit. Nchappez pas de liquides dans lappareil. 10. Afin de rduire les risques dlectrocution, ne dmontez pas lappareil, mais apportez-le plutt un centre de service qualifi sil doit tre rpar. Louverture ou le retrait de pices du socle ou du microphone sans fil autre que les portes daccs peuvent vous exposer des tensions dangereuses et dautres risques. Dbranchez lappareil avant de procder au nettoyage. Utilisez un chiffon humide et doux. 11. Ne surchargez pas les prises de courant et les rallonges. 18 12. Dbranchez cet appareil de la prise de courant et communiquez avec le dpartement de service la clientle de VTech dans les cas suivants :

A. Lorsque le cordon dalimentation est endommag ou corch. B. Si du liquide a t chapp dans lappareil. C. Si lappareil a t expos une source dhumidit telle que la pluie ou leau. D. Si le produit ne fonctionne pas normalement en respectant les instructions de fonctionnement. Rglez uniquement les commandes indiques dans le les instructions de fonctionnement. Les rglages incorrects des autres commandes pourraient provoquer un dommage qui pourrait exiger un travail exhaustif de la part dun technicien autoris afin de rtablir le fonctionnement normal de lappareil. E. Si le produit a t chapp et que le socle et/ou le microphone sans fil a t endommag. F. Si le produit affiche une nette diminution de sa performance. 13. vitez dutiliser le Tlphone de confrence avec microphones sans fil ErisStation pendant un orage. 14. Nutilisez pas le Tlphone de confrence avec microphones sans fil ErisStation pour rapporter une fuite de gaz proximit de la fuite. En certaines circonstances, une flammche pourrait tre provoque lorsque ladaptateur est branch dans une prise de courant ou lorsque le microphone auxiliaire est dpos sur son socle. Ceci est un vnement commun associ la fermeture dun circuit lectrique. Lutilisateur ne doit pas brancher le tlphone dans une prise de courant ni insrer un microphone sans fil recharg dans le socle, si le tlphone se trouve dans un environnement contenant des concentrations de matires inflammables ou autres gaz susceptibles de produire des flammes, sauf en prsence dune aration adquate. Une flammche dans un tel endroit pourrait provoquer un incendie ou une explosion. De tels environnements peuvent comprendre: des endroits o lon utilise de loxygne mdical sans ventilation adquate; des gaz industriels (dissolvants de nettoyage, des vapeurs dessence, etc.); une fuite de gaz naturel, etc. 15. Ne dposez que le microphone sans fil prs de votre oreille que lorsquil est en mode de conversation normale. 16. Ces adaptateurs ont t conus pour tre orients en position verticale ou monts au sol. Les broches ne sont pas conues pour maintenir ladaptateur en place si celui-ci est barnch dans une prise au plafond ou sous une table/

armoire. 17. Pour les PRODUITS BRANCHER UNE PRISE DE COURANT, la prise de courant doit tre installe prs du produit, afin dassurer une accessibilit scuritaire la prise de courant. 19 18. MISE EN GARDE : Il peut y avoir un risque dexplosion si vous utilisez le mauvais type de piles. Nutilisez que le bloc-piles rechargeable inclus ou le bloc-piles de rechange. Nincinrez pas les piles. Celles-ci risqueraient dexploser. Jetez les piles uses selon les renseignements suivant le sceau du RBRCMD. 19. Nutilisez que les adaptateurs inclus avec ce produit. Lutilisation dun adaptateur dont la polarit ou la tension serait inadquate risque dendommager srieusement le produit et mettre votre scurit en pril. CONSERVEZ CES INSTRUCTIONS Pile MISE EN GARDE : Nutilisez que la pile incluse. Ne jetez pas la pile au feu. Vrifiez les instructions spcifiques de mise aux rebus auprs des autorits locales. Nouvrez pas et ne mutilez pas la pile. Llectrolyte qui sen chapperait est corrosif et pourrait causer des brlures ou des blessures aux yeux ou la peau. Llectrolyte est toxique si aval. Soyez prudents lorsque vous manipulez les piles afin dviter les courts-

circuits provoqus par des matriaux conducteurs. Rechargez la pile incluse avec cet appareil, selon les instructions et limites spcifies dans ce guide dutilisation. Stimulateurs cardiaques implants dans lorganisme Les simulateurs cardiaques (sapplique uniquement aux tlphones numriques sans fil):

Lorganisme Wireless Technology Research, LLC (WTR), une firme de recherche indpendante, a men une valuation pluridisciplinaire des interfrences entre les tlphones sans fil portatifs et les stimulateurs cardiaques implants dans lorganisme. Appuye par lAdministration des aliments et drogues (FDA) des tats-Unis, la firme WTR recommande aux mdecins:

Avis aux dtenteurs de stimulateurs cardiaques Ils doivent tenir le tlphone sans fil une distance dau moins six pouces du stimulateur cardiaque. Ils ne doivent PAS placer le tlphone sans fil directement sur le stimulateur cardiaque, tel que dans une poche de chemise, lorsque celui-ci est en marche. Ils doivent utiliser le tlphone sans fil en lappuyant sur loreille qui se trouve dans la direction oppose au stimulateur cardiaque. Ltude effectue par lorganisme WRS na pas identifi de risque pour les dtenteurs de simulateurs cardiaques causs par les gens qui utilisent un tlphone sans fil proximit de ceux-ci. 20 propos des microphones sans fil Confidentialit: Les mmes caractristiques qui constituent des avantages pour les tlphones sans fil affichent galement des restrictions. Les appels tlphoniques sur les tlphones confrence sans fil sont transmis entre le combin sans fil et le socle par le biais dondes radio ; il y a donc la possibilit que vos conversations tlphoniques sans fil soient interceptes par des quipements de rception radio se trouvant dans la porte du combin sans fil. Pour cette raison, vous ne devez pas percevoir les communications sur les tlphones confrence sans fil comme tant aussi confidentielles que celles des tlphones cordons. Alimentation lectrique: Le socle de ce tlphone confrence sans fil doit tre branch une prise lectrique fonctionnelle. La prise lectrique ne doit pas tre contrle par un interrupteur mural. Les appels ne pourront pas tre effectus du tlphone confrence sans fil si le socle est dbranch ou mis hors tension ou si le courant est interrompu. Possibilit dinterfrences aux tlviseurs: Certains microphones sans fil sans fil fonctionnent sur des frquences pouvant causer des interfrences aux tlviseurs et aux magntoscopes. Pour rduire ou prvenir de telles interfrences, ne placez pas le socle du tlphone sans fil proximit ou sur un tlviseur ou magntoscope. Sil y a prsence de parasites, il est conseill dloigner le tlphone sans fil du tlviseur ou du magntoscope afin de rduire possiblement les interfrences. Piles rechargeables: Manipulez les piles avec soin afin de ne pas les court-

circuiter avec des bagues, bracelets ou cls. Les piles ou le conducteur peut surchauffer et causer des blessures. Les bloc-piles rechargeables lhydrure mtallique de nickel: Jetez ces blocs-

piles de manire cologique et scuritaire. Ne les incinrez pas et ne les percez pas. Tel que les autres piles de ce type, elles pourraient dgager une matire toxique qui peut causer des blessures corporelles si elles sont brles ou perces. 21 22 23 VTECH COMMUNICATIONS LTD. A member of THE VTECH GROUP OF COMPANIES. Distributed in the U.S.A. by VTech Communications Inc., Beaverton, Oregon 97008. VTech is a registered trademark of VTech Holdings Limited. ErisStation is a registered trademark of VTech Communications Inc. Orbitlink Wireless TechnologyTM is a trademark of VTech Communications, Inc. Copyright 2019 for VTECH COMMUNICATIONS LTD. All rights reserved. Printed in China. Version 1, 05/19. v2019001