FCC ID: O6XTGA-A Active Duo RFID Tag TGA-A

Asset Tag TGA-A Beacon tag transmitting a unique ID & data at pre-set intervals

 Beacon tag transmitting a unique ID & data at pre

 Ultra long-range transmitter

 Anti-tamper alert option

 Motion sensor option

 Ruggedised IP68 Industrial Housing

reader. An internal battery powers the tag and Wavetrends patented ultra low power use design ensures low power use design ensures The TGA-A ActivDuo Asset Tag is a long life active tag that continuously transmits a unique ID number, which can be detected A ActivDuo Asset Tag is a long life active tag that continuously transmits a unique ID number, which can be detected A ActivDuo Asset Tag is a long life active tag that continuously transmits a unique ID number, which can be detected by Wavetrend reader. An internal battery powers the tag and Wavetrends patented ultra longer battery life at higher rates of transmission than any other brand of active RFID tag. Various preset transmission longer battery life at higher rates of transmission than any other brand of active RFID tag. Various preset transmission longer battery life at higher rates of transmission than any other brand of active RFID tag. Various preset transmission intervals are available. The TGA-A tag is available in both L-Series and L Series and L-Series plus formats KEY FEATURES BUSINESS BENEFITS Tag can be configured to hold standard hold standard 26-bit Wiegand numbering Allows tag to be used with existing access control Allows tag to be used with existing access control systems separately or together with the active RFID with the active RFID system. Best Usage Guide Personnel Configurable settings include:

 Site/vendor ID

 Tag ID

 Tag Age Counter

 Various transmission repetition intervals petition intervals

 Tamper Alarm Collision avoidance algorithm Ultra low power consumption

 A unique code that can be allocated by Wavetrend to A unique code that can be allocated by Wavetrend to each customer on request. Readers can be set to Readers can be set to ignore tags with incorrect site codes.

 4.2 billion tag IDs are available per site code. 4.2 billion tag IDs are available per site code.

 The Age Counter allows for advance notification of The Age Counter allows for advance notification of the end of battery life and for the unique identification and for the unique identification for each transmission made by the tag.

 Different status transmission intervals allow tags to be Different status transmission intervals allow tags to be used in diverse applications while offering the best used in diverse applications while offering the best battery life spans in the market.

 Provides instant notification of unauthorized attempts authorized attempts to remove a tag from an asset. Reduces loss of data caused by simultaneous transmissions from multiple tags. Typical lifespan of 5 years when transmitting at the years when transmitting at the standard or greater interval. 2011 Wavetrend Europe Limited | All Rights Reserved | All specifications are subject to change without notice. Limited | All Rights Reserved | All specifications are subject to change without notice. IP68 Waterproof Europe, Australasia and Middle East Corporate Office

+44 (0)20 8334 8400 Corporate Office USA, Canada and South America South Africa

+1 (703) 539 8502 +27 (0)11 792

+1 (703) 539 8502 +27 (0)11 792 6066 Asset Tag TGA-A Typical Applications Specifications The TGA-A Asset Tag has a unique omni directional antenna design allowing the tag to be read from all directions and to be deployed equally well on metallic and non metallic assets. Optimum read range is achieved on metal with a 10% reduction on Non metals. The tag is sealed to IP68 providing the highest level of water ingress protection. Model Range The tags can be ordered using the part numbers listed below:

L-Series TGA-A Air Interface Protocols L-Series and L-Series+

to a proprietary communication protocol used between Wavetrend tags and readers. refers L-Series tags provide ultra long read range and are ideal for use in low tag density (< 30 reader) operations such as tags per personnel asset management applications and access control systems. tracking, small L-Series+ offers a wide range of extra features including:

Increased levels of security, Encrypted air interface and secure concealed site code options Multiple classes, allowing to select shorter messaging packets for high speed or high density application the user User definable data fields, allowing up to 200 characters of user data to be stored on the tag Ordering & Further Information For more information on purchasing the TGA-A Tag please email Wavetrends Sales team:

sales@wavetrend.net For more information on Wavetrend visit our website. Environmental Operating temperature Storage temperature Humidity Physical Size Weight Colour Material

: -30C to +60C

: -40C to +70C

: 5% to 90% (non-condensing) condensing)

:68 x 36 x 16mm

:25g

:Grey

:Nylon Radio Frequency Transmit Frequency Range

: 433.92 MHz

: 1 to 100+ meters (actual range is determined by the

: 1 to 100+ meters (actual range is determined by the choice of reader & antenna used to detect the tag and choice of reader & antenna used to detect the tag and the environment it is used in) the environment it is used in) Electrical Power Accessories TA-TGA TA-TGA-AT

: Internally powered by lithium battery Internally powered by lithium battery

(All sold in packs of 10)

(All sold in packs of 10)

: Tag attachment kit

: Tamper alerting tag attachment kit

: Tamper alerting tag attachment kit Smart telemetry tag, that alert and log the user if out of bounds conditions in either temperature or humidity occur Greater selection of tag beacon rates offering greater tag of the reduction in spurious transmissions. L-Series+ tags can only be read by L-Series+

readers. L-Series readers can read both L-Series and L-Series+ tags. FCC Statement of Conformity Wavetrend , TGA-A Active Duo , FCC ID: 06XTGA-A

* (from front page) Battery life calculations assume operation at room temperature with the default status transmission interval of 1.5 seconds, without the anti-tamper circuit armed and without a motion sensor fitted. IMPORTANT NOTICE: Wavetrend ACTIV tags do not comply with the FCC Part 15 rules or hold IC approval, so are not available for sale into the United States of America or Canada. This device complies with Part 15 of the FCC rules subject to the following three les subject to the following three conditions:

1) This device may not cause harmful interference. 2) This device must accept all interference received, including interference that may cause This device must accept all interference received, including interference that may cause undesired operation. 3) This device is for commercial use only and intended for use in a confined area with an This device is for commercial use only and intended for use in a confined area with an appropriate system receiver Changes or modifications not expressly approved by the party responsible for compliance could or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2011 Wavetrend Europe Limited | All Rights Reserved | All specifications are subject to change without notice. Limited | All Rights Reserved | All specifications are subject to change without notice. Europe, Australasia and Middle East Corporate Office

+44 (0)20 8334 8400 Corporate Office USA, Canada and South America South Africa

+1 (703) 539 8502 +27 (0)11 792

+1 (703) 539 8502 +27 (0)11 792 6066

User Manual Active RFID Tags ABBREVIATIONS USED USER MANUAL Active RFID Tags Abbreviation Meaning ActivDuo ASK One of Wavetrends two ranges of Active RFID Tags Amplitude-shift keying modulation BNC connector Bayonet Neill-Concelman connector (a common type of RF connector) CE CISPR CSC EMC FCC ID IEC Conformit Europenne, "European Conformity" in French. Comite international Special des Perturbations Radioelectriques, International Special Committee on Radio Interference in French. Customer Site Code Uniquely assigned by Wavetrend to every customer, on request. Electromagnetic Compatibility Federal Communications Commission (USA) Identifier International Electrotechnical Commission IP rating Ingress Protection rating IPR IT m MHz OEM Ohm PUC RF RFID RoHS RTLS SABS Tx VHB WEEE V/m Intellectual Property Rights Information Technology Meter (metric measurement) Mega hertz (= 1000 Hz) Original Equipment Manufacturing The unit of electrical impedance or, in the direct current case, electrical resistance, named after Georg Ohm Product Unique Code Radio Frequency Radio Frequency Identification Restriction of Hazardous Substances (EU Directive) Real Time Location System South African Bureau of Standards Transmit / Transmission Very high bond Waste Electrical and Electronic Equipment (EU Directive) Microvolts per meter (the units used to describe the strength of an electric field created by the operation of a transmitter) Table 1: Abbreviations Used Document No. Configuration No. Wavetrend Technologies Ltd Issue Date 25042002 REV 2.3 User Manual 25TH APRIL 2012 Page 2 OF 30 USER MANUAL Active RFID Tags IMPORTANT NOTICE TO THE READER Each of Wavetrends ActivDuo active RFID tags have been specifically designed to operate in specific circumstances or applications and be attached to specific types of items in a specific manner. Failure to follow the guidelines and application notes contained in this manual for each tag listed can lead to their incorrect operation and failure to perform as expected or intended. The choice of which Wavetrend tags to use in any project must be made by a fully trained and Wavetrend certified engineer. Wavetrend accepts no responsibility for any failure of the product in any way caused by the incorrect selection, installation and usage of Wavetrends active RFID tags, readers, ancillary devices and software. DISCLAIMER NOTICES REGARDING HARDWARE, SOFTWARE, DOCUMENTS AND SERVICES THAT ARE AVAILABLE FROM WAVETREND:

In no event shall Wavetrend and/or its respective suppliers be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits, whether in an action of contract, negligence or other tortuous action, arising out of or in connection with the use or performance of hardware, software, documents, provision of or failure to provide services, or information available from Wavetrend and/or our website http://www.wavetrend.net. The documents published by Wavetrend could include technical inaccuracies or typographical errors. Changes are periodically added to the information herein. Wavetrend and/or its respective suppliers may make improvements and/or changes in the product (s) and/or the program (s) described herein at any time without prior notice. FCC STATEMENT The ActivDuo devices described in this manual comply with Part 15 of the FCC Rules. Operation is subject to the following three conditions:

The device may not cause harmful interference The device must accept all interference received, including interference that may cause undesired operation. The device is for commercial use only and intended for use in a confined area with an appropriate system receiver Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Document No. Configuration No. Wavetrend Technologies Ltd Issue Date 25042002 REV 2.3 User Manual 25TH APRIL 2012 Page 3 OF 30 USER MANUAL Active RFID Tags TABLE OF CONTENTS 1 THE WAVETREND RANGE OF ACTIVE RFID TAGS .................................................................................. 6 1.1 Product Overview .......................................................................................................................... 6 1.2 Key Features and Benefits of ActivDuo .......................................................................................... 7 1.3 Key Features and Benefits of Active Tags ..................................................................................... 8 1.4 Data Transmitted by ActivDuo and Active Tags ............................................................................. 9 1.5 General Facts about Wavetrend Tags ......................................................................................... 10 1.6 Obtaining Professional Advice on Using Tags .............................................................................. 10 1.7 ActivDuo Tag Functionality .......................................................................................................... 11 1.7.1 Standard Transmission Mode .................................................................................................. 11 1.7.2 Movement Alert Mode ............................................................................................................. 11 1.7.3 Tamper Alert Mode .................................................................................................................. 11 1.8 Wavetrend Tag Families Overview .............................................................................................. 12 1.8.1 TGP (Personnel) Family .......................................................................................................... 12 1.8.2 TGA (Asset) Family ................................................................................................................. 12 1.8.3 TGM (Micro) Family ................................................................................................................. 12 1.9 Tag Properties ............................................................................................................................ 13 1.10 Tag Battery (Functional) Life Span .............................................................................................. 13 1.10.1 End of Life ............................................................................................................................... 14 1.10.2 Keeping Tags in Stock ............................................................................................................. 14 1.11 Tag Accessories .......................................................................................................................... 14 1.11.1 Tag Attachment Kits ................................................................................................................ 14 1.11.2 Anti-Tamper Tag Attachment Kits ............................................................................................ 14 1.11.3 Identifying the Correct Attachment Kit to Use ........................................................................... 15 1.11.4 Other Attachment Methods ...................................................................................................... 15 1.12 Programming Tags ...................................................................................................................... 15 1.13 Safe Use ..................................................................................................................................... 16 1.14 ATEX Special Condition of Use ................................................................................................... 16 1.15 Disposal of Tags ......................................................................................................................... 16 1.16 FCC Conditions of use. .............................................................................................................. 16 2 THE TGP PERSONNEL TAG .............................................................................................................. 17 2.1 Important Facts about the TGP Tag ............................................................................................. 17 2.2 Using the TGP for Tracking Personnel ......................................................................................... 17 2.2.1 Requirements & Instructions .................................................................................................... 17 2.3 Installing the TGP for Tracking Assets ......................................................................................... 17 2.3.1 Requirements .......................................................................................................................... 17 2.3.2 Preparation ............................................................................................................................. 18 2.3.3 Arming the anti-tamper (if using the TATGP-AT attachment kit) ............................................... 18 2.3.4 Final steps ............................................................................................................................... 18 2.4 Removing the TGP ...................................................................................................................... 18 Document No. Configuration No. Wavetrend Technologies Ltd Issue Date 25042002 REV 2.3 User Manual 25TH APRIL 2012 Page 4 OF 30 USER MANUAL Active RFID Tags 2.4.1 Requirements .......................................................................................................................... 18 2.4.2 Removal .................................................................................................................................. 18 3 THE TGA ASSET TAG ....................................................................................................................... 20 3.1 Important Facts about the TGA Tag ............................................................................................. 20 3.2 TGAHT........................................................................................................................................ 20 3.3 TGAE .......................................................................................................................................... 20 3.4 Attaching the TGA for Tracking Containers and Other Assets ...................................................... 21 3.4.1 Requirements .......................................................................................................................... 21 3.4.2 Preparation ............................................................................................................................. 21 3.4.3 Arming the anti-tamper (if using the TATGA-AT attachment kit) ............................................... 21 3.4.4 Final steps ............................................................................................................................... 21 3.5 Removing the TGA ...................................................................................................................... 21 3.5.1 Requirements .......................................................................................................................... 22 3.5.2 Removal .................................................................................................................................. 22 4 THE TGM MICRO TAG ......................................................................................................................... 23 4.1 Important Facts about the Micro Tag ........................................................................................... 23 4.2 Attaching the TGM for Tracking IT Equipment and Other Assets .................................................. 23 4.2.1 Requirements .......................................................................................................................... 23 4.2.2 Preparation ............................................................................................................................. 23 4.2.3 Arming the anti-tamper (if using the TAM-AT attachment kit) .................................................... 23 4.2.4 Final steps ............................................................................................................................... 24 4.3 Removing the TGM ..................................................................................................................... 24 4.3.1 Requirements .......................................................................................................................... 24 4.3.2 Removal .................................................................................................................................. 24 APPENDIX A. DOCUMENT INFORMATION .......................................................................................... 25 APPENDIX B. CERTIFICATIONS ................................................................................................................ 26 APPENDIX C. ELECTRICAL SPECIFICATIONS ............................................................................................. 28 APPENDIX D. ATEX TAG LABELLING ...................................................................................................... 29 TGPHZ ATEX labelling ...................................................................................................................... 29 TGAHZ ATEX labelling ....................................................................................................................... 30 TGAHT ATEX labelling ....................................................................................................................... 30 TGAE ATEX labelling ........................................................................................................................ 30 Document No. Configuration No. Wavetrend Technologies Ltd Issue Date 25042002 REV 2.3 User Manual 25TH APRIL 2012 Page 5 OF 30 USER MANUAL Active RFID Tags 1 THE WAVETREND RANGE OF ACTIVE RFID TAGS 1.1 Product Overview Wavetrend tags are Active Radio Frequency Identification (RFID) beacon tags (i.e. self-powered tags, that transmit their data at periodic intervals without being asked to transmit by a reader) and are to be used in conjunction with the Wavetrend range of Active RFID readers or OEM products that support reading Wavetrends tags. Wavetrend tags are available in two formats Active and ActivDuo. Active tags comply with the ETSI radio standards and carry a CE mark ActivDuo Tags comply with the FCC part 15 regulations All Wavetrend readers can read both Active and ActivDuo tags. Activ Duo tags have A included in their part number, e.g. TGP-A. It should be noted that the supply or sale of Active tags into an FCC regulated country is illegal, only the FCC certified ActivDuo tags may be used in these countries Wavetrend Tags can be used in various applications such as access control, personnel monitoring, asset location & status monitoring, vehicle monitoring and building management applications. Standard on-board sensors identify attempts to tamper with or move the tagged asset and the tag transmits alerts immediately, allowing the RFID system to raise real time alerts for the RFID system users. Temperature, humidity and other digital sensors can be added to the tags to transmit the data from these sensors wirelessly. Please enquire with Wavetrend if you require such advanced sensor functionality. The tags are suitably packaged in sealed plastic housings to meet the most common requirements for different tag usage applications; although it is advised to check with Wavetrend and the local standards authority that the tag(s) of choice meet all regulatory requirements in the country and location of use before specifying or using it in that country and/or location. For instance, tags used within a petrochemical plant will be required to hold nationally recognized intrinsic safety (IS) certification, and many countries require that their own IS certification is obtained for the tags. Document No. Configuration No. Wavetrend Technologies Ltd Issue Date 25042002 REV 2.3 User Manual 25TH APRIL 2012 Page 6 OF 30 USER MANUAL Active RFID Tags 1.2 Key Features and Benefits of ActivDuo Key Tag Features Business Benefits Transmits a Unique ID Number Allows for the unique identification of every tag in an RFID system, and by extension, the asset or person the tag is attached to or carried by. Incorporates a motion sensor as standard Transmits on a regular basis (called status transmissions). The next transmission is initiated randomly within a very short period of time after the user programmed transmission or Tx interval has elapsed after the previous transmission. Transmits on an exceptional basis (called alarm or alert transmissions) immediately on activation of either tamper sensor (if armed) or the movement sensor. the Transmits additional tag information, such as the tag type, the tags standard transmission interval, the status of the alarm bit, the status of the tamper bit, the motion sensor counter and the tamper sensor counter. Provides immediate notification if movement of the tag occurs. This allows the tag to operate in two modes more frequent transmissions when in alert mode (i.e. when movement or tampering occurs), or less frequent transmissions when in standard or at rest mode. Regular transmissions at short intervals (typically 10 seconds) provide near real time tracking capability of tagged assets or personnel, while still providing an exceptional functional lifespan Provides real time indication of any attempt to tamper with a tag or move a tagged asset, with alert transmissions being made at short intervals (typically 1.5 seconds) for a period of 5 seconds. Allows for advanced application functions to be built into the RFID system to fully utilize the RFID hardwares capabilities. Ultra low power consumption Life span of 5+ years when transmitting at the standard 10 second or greater interval All tags sealed to IP64 standards or higher Splash proof and intrinsically safe capable All tags can be configured, activated or deactivated by the user by using a desktop tag programmer (PG101-A) available for purchase from Wavetrend or any of its Accredited Partners. Document No. Configuration No. Wavetrend Technologies Ltd Issue Date 25042002 REV 2.3 User Manual 25TH APRIL 2012 Page 7 OF 30 USER MANUAL Active RFID Tags 1.3 Key Features and Benefits of Active Tags Key Tag Features Business Benefits Transmits a Unique ID Number Allows for the unique identification of every tag in an RFID system, and by extension, the asset or person the tag is attached to or carried by. Transmits on a regular basis (called status transmissions). The next transmission is initiated randomly within a very short period of time after the user programmed transmission or Tx interval has elapsed after the previous transmission. Transmits on an exceptional basis (called alarm or alert transmissions) immediately on activation of either tamper sensor (if armed) or the movement sensor. the Transmits additional tag information, such as the tag type, the tags standard transmission interval, the status of the alarm bit, the status of the tamper bit, the motion sensor counter and the tamper sensor counter. Regular transmissions at short intervals (typically 1.5 seconds) provide near real time tracking capability of tagged assets or personnel, while still providing an exceptional functional lifespan Provides real time indication of any attempt to tamper with a tag or move a tagged asset, with alert transmissions being made at short intervals (typically 1.5 seconds) for a period of 5 seconds. Allows for advanced application functions to be built into the RFID system to fully utilize the RFID hardwares capabilities. Collision avoidance algorithm Ultra low power consumption Reduces loss of data through simultaneous transmissions from multiple tags. The randomization of the transmission interval aids the collision avoidance algorithm. Life span of 5+ years when transmitting at the standard 10 second or greater interval All tags sealed to IP64 standards or higher Splash proof and intrinsically safe capable All tags can be configured, activated or deactivated by the user by using a desktop tag programmer (PG101-A) available for purchase from Wavetrend or any of its Accredited Partners. Document No. Configuration No. Wavetrend Technologies Ltd Issue Date 25042002 REV 2.3 User Manual 25TH APRIL 2012 Page 8 OF 30

1.4 Data Transmitted by ActivDuo and Active Tags Key Tag Features Business Benefits USER MANUAL Active RFID Tags Data Transmitted by Tags:

Site/Vendor Code (CSC)*

Tag ID*

Tag Age Counter Product Unique Code (PUC) Various standard transmission repetition intervals*

(default is 10 seconds ActivDuo)

(default is 1.5 seconds Active)

A unique code that is allocated by Wavetrend to each customer on request. Readers can be set to accept only one specific CSC and ignore tags with incorrect site codes 4.2 billion Tag IDs are available per Site Code (Tag ID is different from the PUC). The Age Counter allows for advance notification to RFID systems of the nearing end of the tags functional life. Uniquely identifies each transmission made by the tag. Factory set ID for the tag that can function as the tags unique ID number instead of a Site Code/Tag ID combination. The user cannot change the PUC. Different status transmission intervals allow tags to be configured for use in diverse applications in a way to ensure 100% system functionality and that the maximum battery life is achieved, but without overloading the RFID system with too many unnecessary tag signals. Various alert transmission repetition intervals*

(default is 1.5 seconds, nominal)

Different alert transmission intervals allow tags to be used in diverse security applications in a way to ensure 100% system functionality is achieved, but maximizing the battery life span of the tag.

 When activated, alert transmissions continue for a maximum period of 5 seconds. Movement Alert Provides instant notification of an attempt to move a tag by setting the alarm bit and entering Alert Tx mode for 5 seconds. Movement Counter Value Tamper Counter Value Increments each time the motion sensor triggers the tags alert transmission mode. This allows an RFID system to determine if Alert Tx mode was initiated because of movement. Increments each time the tamper sensor triggers the tags alert transmission mode. This allows an RFID system to determine if Alert Tx mode was initiated because of tampering, or if a tamper event occurred outside of a reading zone. Tamper Alert Provides instant notification of unauthorized attempts to remove a tag from an asset by setting the alarm bit and transmitting 4 rapid alarm Txs. Document No. Configuration No. Wavetrend Technologies Ltd Issue Date 25042002 REV 2.3 User Manual 25TH APRIL 2012 Page 9 OF 30 USER MANUAL Active RFID Tags 1.5 General Facts about Wavetrend Tags

 Radio Frequency (RF) signals are scientifically complex and subject to strict government controls to avoid causing interference with other RF signals. How tags are used and where they are used all affect how the tags perform and what may be allowed in one country may be prohibited in another.

 The products offered by other active RFID vendors are not functionally identical to Wavetrends and may perform very differently. Using and installing RFID tags requires careful consideration of these and many other factors by a trained RFID engineer. The use of the services of a Wavetrend trained and accredited engineer to determine the requirements of an RFID system and to specify the correct Wavetrend products to use is strongly recommended to ensure a satisfactory experience for the user.

 All Wavetrend tags operate at a frequency of 433.92 MHz as standard.

 Wavetrend Active and ActivDuo tags use different internal firmware and cannot be reconfigured as each other, I.e. an Active tag cannot be changed into an ActivDuo tag they are totally separate product lines. 1.6 Obtaining Professional Advice on Using Tags For most tagging applications, following the guidelines in this manual will provide sufficient basic advice to any user. If these guidelines do not provide enough assistance, then the user should contact one of Wavetrends Accredited Partners or a Wavetrend Professional Services representative directly for further advice and assistance. Note on Accredited Partners: Wavetrend has a worldwide Accredited Partner network of companies trained up in all aspects of Wavetrend technology. These companies can offer their expertise and knowledge to ensure that the best choice of Wavetrend products is made to suit users requirements, and that the products are correctly installed, configured and operated. A full listing of Accredited Partners can be found on www.wavetrend.net under the Partners section. Wavetrend does not recommend the use of services provided by any company that is not fully trained and accredited by Wavetrend. Document No. Configuration No. Wavetrend Technologies Ltd Issue Date Page 25042002 REV 2.3 User Manual 25TH APRIL 2012 10 OF 30 USER MANUAL Active RFID Tags 1.7 ActivDuo Tag Functionality The ActivDuo tag offers three primary modes of operation that determines how often the tag will transmit. They are defined as being Standard, Movement Alert and Tamper Alert transmission modes:

1.7.1 Standard Transmission Mode In this mode, the tag will transmit its ID number and ancillary data regularly at the programmed status transmission interval (called the Status Tx rate). The default Status Tx rate is one transmission at least every 10 seconds for ActivDuo and one transmission every 1.5 seconds for Active Tags. Other transmission can be selected by the user and programmed into the tag through a tag programmer unit. See the section on tag programming for more information on how to do this. Status Tx Rates Active Status Tx Rates ActivDuo 0.4 seconds 0.8 seconds 10 seconds (default) 30 seconds 1.5 seconds (default) 15 seconds 30 seconds 1.7.2 Movement Alert Mode In this mode the tag will transmit its data at a shorter alert interval (the Alert Tx rate) for a short period of time if the motion sensor within the tag registers movement or vibration. The default transmission rate for movement alert operation is 1 transmission every 1.5 seconds. But other alert transmission intervals (0.4 or 0.8 can be selected by the user and programmed into the tag. The tag will cease transmitting at the Alert Tx rate after 5 seconds of entering Movement Alert mode and revert to the Status Tx rate. Each time the motion sensor is activated when the tag is in Standard mode, the tag will immediately enter the Movement Alert mode. The movement counter will increment each time the Movement Alert mode is activated. Alert Tx Rates Active 0.4 seconds 0.8 seconds Alert Tx Rates ActivDuo 0.4 seconds 0.8 seconds 1.5 seconds (default) 1.5 seconds(default) 1.7.3 Tamper Alert Mode In this mode, triggered by the anti-tamper circuit, the tag will transmit its data, together with setting the Alarm bit, in a rapid burst of four alert transmissions and in intervals of 0.4 seconds. The tamper alert mode will interrupt the movement alert mode if a tamper event occurs while the tag is moving. The tamper counter value will increment each time the Tamper Alert mode is activated. Document No. Configuration No. Wavetrend Technologies Ltd Issue Date Page 25042002 REV 2.3 User Manual 25TH APRIL 2012 11 OF 30 1.8 Wavetrend Tag Families Overview Wavetrends new range of tags is based upon 3 distinct families Personnel (P), Asset (A) and Micro (M). USER MANUAL Active RFID Tags 1.8.1 TGP (Personnel) Family Within the TGP Family there are 4 versions TGP (Personnel), Standard Grey Personnel Tag TGPS (Personnel Slimline), Thinner White Personnel Tag TGPTELEMETRY, Tag transmits both Temperature and Humidity data TGPHZ, (Personnel Hazard), Bright Yellow Personnel Tag that holds ATEX and IECEx Certification. 1.8.2 TGA (Asset) Family Within the TGA Family there are 7 versions TGA (Asset), Standard Black Asset tag TGAHT(Asset High Temp) , White Asset tag rated from -30 to + 85 Degrees Celsius, that holds ATEX and IECEx Certification. TGAE (Asset Tag Extreme), Orange Potted tag rated from -30 to + 85 Degrees Celsius, that holds ATEX and IECEx Certification. TGAHZ (Asset Hazard), Bright Yellow Tag that holds ATEX and IECEx Certification. TGATEMP, Tag transmits Temperature data TGALP (Asset Low Profile), A low profile indoor asset tag TGAS (Asset Strap), Asset tag with strap attachment 1.8.3 TGM (Micro) Family Within the TGM Family there are 2 versions TGM (Micro) Standard Tag TGMS (Micro Strap), Micro tag with strap attachment Document No. Configuration No. Wavetrend Technologies Ltd Issue Date Page 25042002 REV 2.3 User Manual 25TH APRIL 2012 12 OF 30 USER MANUAL Active RFID Tags 1.9 Tag Properties The tag properties of each of the tags are summarized below Tag Type IP Rating Temperature rating Additional Certification TGP TGPS 64 64 TGPTELEMETRY 0

-30 to + 60 Degrees C

-30 to + 90 Degrees C

-30 to + 90 Degrees C 64 67 67 68 67 67 67 67 64 64 TGPHZ TGA TGAHT TGAE TGAHZ TGATEMP TGALP TGAS TGM TGMS

-30 to + 60 Degrees C ATEX, IECEx, IS

-30 to + 90 Degrees C

-30 to + 90 Degrees C ATEX, IECEx, IS

-30 to +90 Degrees C ATEX, IECEx, IS

-30 to + 90 Degrees C ATEX, IECEx, IS

-30 to + 90 Degrees C

-30 to + 90 Degrees C

-30 to + 90 Degrees C

-30 to + 90 Degrees C

-30 to + 90 Degrees C 1.10 Tag Battery (Functional) Life Span Wavetrends tags typically use a Lithium-Ion battery that the manufacturer states as offering a 10 year shelf life, rated for. The batteries are more efficient at producing current in hotter temperatures and less efficient in colder temperatures. Note about calculating tag life spans: Wavetrend provides all Accredited Partners with an application which allows the minimum expected life span of a tag to be quite accurately calculated by entering information about the tag type, the tag configuration (data & options) and expected usage information (temperatures & amount of movement) that is available. If you do not have access to the tag life span calculator and want to find out if a tag will provide a sufficient functional life for your intended use, please ask Wavetrend or one of our Accredited Partners to assist you. We feel it is better to be conservative than to set expectations that may lead to customer disappointment, but for the majority of tags sold we would expect the customer to enjoy a potential maximum life span of up to 5 years from a TGP and TGA tag depending very much on how the tag is configured to operate, and the ambient temperature it will experience throughout its life span. The TGM and TGPS have smaller batteries and will last a shorter period of time. Document No. Configuration No. Wavetrend Technologies Ltd Issue Date Page 25042002 REV 2.3 User Manual 25TH APRIL 2012 13 OF 30 USER MANUAL Active RFID Tags Summary: What can reduce a tags life span?

Transmission intervals. Shorter standard and alert intervals = shorter life span. Ambient temperatures. The power consumption of the electrical components inside the tag will change very slightly with changes in temperature and the battery will be less efficient in generating energy. Colder temperatures = shorter life span. Regular temperature cycles. Where the tag is subjected to repeated and regular temperature cycles (hot /

cold / hot etc.) the battery life span will be reduced. The greater the extremes in hot and cold, the greater the reduction of life span. Regular temperature cycles = shorter life span. The amount of movement, and therefore how often the Alert mode is initiated, will affect life span. More movement = shorter life span. 1.10.1 End of Life The tag will continue to transmit its data signals at a constant strength until the battery is exhausted, at which point the tag will cease transmitting. The battery loses less than 1% of its power for every year in storage. The battery has a maximum specified shelf life of 8 years, in the case of where the tag is never activated. The tags Battery Age Counter value is transmitted with every signal , by monitoring the value of the age counter, the recipient RFID software system can alert the user to the fact that the tag is nearing the end of its functional life. It should be noted that it is not possible for the user to replace the battery in any Wavetrend tags 1.10.2 Keeping Tags in Stock It is recommended that tags be kept in stock for less than two years after purchase from Wavetrend. The oldest tags held in stock should always be sold on, used or activated first. Tags should not be activated if they are to be held in stock. Activate tags only when needed for use. If tags are to be used on occasions, deactivate them when they are in storage between uses to maximize their useful life. 1.11 Tag Accessories 1.11.1 Tag Attachment Kits Most of the Tags can be attached to most types of assets using the Tag Attachment Kits supplied by Wavetrend. The attachment kit consists of 10 very high bond (VHB), double-sided adhesive pads which are cut to match the size of the tag. The VHB gel pads will take 24 hours to cure and reach maximum adhesion to both the tag and the asset. Within this time period it will be easier to remove the tag if it needs repositioning or has been affixed to an asset in error. If the tag & gel pad are removed from the asset soon after first being affixed to the asset, it is not recommended to try reuse the gel pad as it will not adhere to the asset surface as well for the second time. Replace the pad. The VHB pads will not adhere to wet, greasy, dusty or rough surfaces (such as wood, concrete etc.) 1.11.2 Anti-Tamper Tag Attachment Kits The kits of 10 VHB gel pads also include a small magnet that fits into the pre-punched hole in each gel pad. This magnet provides the mechanism to arm the anti-tamper circuit in the tag. If any attempt is made to remove the tag, the deformation and breakup of the gel pad caused by the attempt to remove the tag will Document No. Configuration No. Wavetrend Technologies Ltd Issue Date Page 25042002 REV 2.3 User Manual 25TH APRIL 2012 14 OF 30 USER MANUAL Active RFID Tags cause the magnet to shift in position relative to the tag, immediately activating the tamper alert transmission from the tag. It is recommended to place a spot of Superglue or other suitable adhesive on the magnet so that it will adhere to the asset surface and be able to trigger a tamper alert more quickly should any unauthorized attempt be made to remove a tag from its asset. Do not glue the magnet to the back of the tag, this will prevent the anti-tamper feature from working. 1.11.3 Identifying the Correct Attachment Kit to Use All attachment kits have a product code starting with the prefix TA, and share the same product code number as the tag type they are to be used with. For example, the TATGP kit will be used with the TGP tag. The Anti-Tamper Tag Attachment Kit has the suffix -AT after the kits product code. For example the anti-

tamper kit for the TGP tag is the TATGP-AT. 1.11.4 Other Attachment Methods The TGA Family of tags are designed to allow attachment to assets using customer supplied screws or rivets, and fixing holes are provided in the tag housing for this purpose. It is not recommended to rely purely on the VHB gel pads or other adhesives if a very secure fixture to an asset is required, such as to a vehicle or asset that is normally handled roughly. It is recommended to test any other type of adhesive or glue before generally attaching tags to assets using this other type of adhesive. Not all adhesives will bond well with both the tag and the surface material of the tagged object. Some adhesives or glues will cause damage to the plastic tag housing and possibly to the tag. It is not recommended to attach the tag by any type of permanent adhesive method if the tag is to be removed at the end of its functional lifespan as damage may be caused to the asset, rather use screws or rivets that can be removed without causing damage to the outdoor asset, or for indoor assets, use the tag attachment kits. For temporary attachment to assets that allow quick removal or re-attachment of the tag when desired, adhesive Velcro strips are an excellent material for this purpose. 1.12 Programming Tags Before tags can be deployed and used, they should be configured to suit the users requirements. The tag is manufactured to hold a unique factory set CSC & Tag ID and is set to the default Status Tx & Alert Tx rates and motion sensor sensitivity settings previously mentioned. Should the Status or Alert Tx rates need to be changed, or for any additional user data to be written onto the tag, the user will need to use the PG101-A Wavetrend Tag Programmer unit available for purchase from any Wavetrend sales agent. Alternatively the user can order tags from their Wavetrend sales agent pre-programmed to their specification, if the agent offers this service. Wavetrend offers tag programming at manufacture for orders exceeding 1000 tags. Please enquire with Wavetrend or a sales agent for more information. Tags are typically shipped in an inactive or asleep state to comply with regulations concerning the air freight of transmitting devices. The L-PG101-A Programmer must be used to configure, activate the tags prior to deployment. Document No. Configuration No. Wavetrend Technologies Ltd Issue Date Page 25042002 REV 2.3 User Manual 25TH APRIL 2012 15 OF 30 USER MANUAL Active RFID Tags 1.13 Safe Use Wavetrend tags impose no health or safety risk to people involved with installation, maintenance or use. They are as safe to use as any standard household electrical appliance (like a radio). In particular:

No hazardous materials are used in the manufacture of the product. The products contain no CFCs or ozone depleting materials, nor were such materials used in their manufacture. Wavetrend Tags are lead free, and use a low voltage 3.0 volt lithium battery. When new, a tag contains less than .5 grams of lithium. This amount decreases as the tag is used, it is very small and does not pose any health risk. 1.14 ATEX Special Condition of Use Care shall be taken when wiping the tag in a Group I mining location. Only wipe with an antistatic /

damp cloth. 1.15 Disposal of Tags At the end of its functional life the tag must be disposed of in a suitable local recycling facility and in accordance with any local laws pertaining to the recycling of waste electronic equipment. The tag consists of an ABS plastic housing, electronic components and a lithium battery. The tag contains no substances banned by the European Unions Restriction of Hazardous Substances (RoHS) directive. European customers: under the provisions of the Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC, the spent tag must be recovered and recycled in accordance with the local regulations pertaining to WEEE. Please enquire with your European Wavetrend sales agent for details of how to dispose the tag in the correct way. Wavetrend (UK) Ltd. EPRN: WEE/GD0727WW Please protect our environment and recycle all used electronic and electrical equipment through reputable, ethical companies who properly handle electrical waste. Do not throw the used tag out with normal garbage. 1.16 FCC Conditions of use. The FCC have granted certification of Wavetrends ActivDuo range of tags under the following conditions of use. FCC Statement of Conformity Wavetrend , TG XXX ActivDuo , FCC ID: 06X XXX-A This device complies with Part 15 of the FCC rules subject to the following three conditions:

1) This device may not cause harmful interference. 2) This device must accept all interference received, including interference that may cause undesired operation. 3) This device is for commercial use only and intended for use in a confined area with an appropriate system receiver Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Document No. Configuration No. Wavetrend Technologies Ltd Issue Date Page 25042002 REV 2.3 User Manual 25TH APRIL 2012 16 OF 30 USER MANUAL Active RFID Tags 2 THE TGP PERSONNEL TAG The TGP Personnel tag is generally used by people who need to carry a tag with them, typically for access control or time & attendance purposes. The housing incorporates a clip-slot for convenient wearing for that purpose. However, it may be used in other applications such as asset monitoring. The mounting and affixing method for the tag depends on the type of application it is used in. The TGPHZ version of this product can be used for exactly the same purpose but in addition holds the ATEX, IECEx certifications. 2.1 Important Facts about the TGP Tag

 The tag must not be installed directly onto metal surfaces.

 The tag has an omni directional antenna, which achieves and a near perfect spherical field allowing this tag to mounted in any orientation.

 The tag can a movement sensor in Active versions TGP-MS, in Active Duo TGP-A it operates in three different modes, the standard operation mode that transmits its data with Status Tx rate, the movement alert operation mode that transmits with the Alert Tx rate when its movement sensor senses any movement or vibration of the tag, and the tamper alert mode if the tag is fixed to an object with Anti-

Tamper kit.

 The tag is rated to operate in ambient temperatures between -30oC and +60oC, using the tag in ambient temperatures beyond this range will cause damage to the tag and possibly cause its complete failure.

 The Nema standard IP rating of the TGP tag is 64, which means it is protected against dust and splashing water. Using the tag in harsher conditions will cause damage to the tag and possibly cause its complete failure. Note: Using this tag for an incorrect application can significantly reduce the read range the tag provides, possibly to the point that no signal from the tag can be received at all. This manual gives instructions for the correct method and location to attach the tag; failure to follow these instructions will result in impaired operation or even the complete loss of tag signals. 2.2 Using the TGP for Tracking Personnel 2.2.1 Requirements & Instructions

 TGP- tag

 Any standard card clip, lanyard, key ring, card holder etc. Attach the tag to the clip / lanyard / key ring using the clip slot provided on the tag, or slide the tag into the card holder (it will fit in most). The tag should be worn with the flat back facing outward, and should not be kept in a pocket or anywhere else where it is pressed up against the body. The human body can reduce the tags signal strength and this may lead to apparently erratic operation in certain instances. If desired, a sticky-back plastic label that is pre-printed with personal identification information can be stuck to the flat back of the TGP tag, to enable the TGP to function as an ID card for the carrier. 2.3 Installing the TGP for Tracking Assets 2.3.1 Requirements

 TGP tag

 1 adhesive gel pad (& magnet) from a 10-pack TATGP or TATGP-AT Attachment Kit Document No. Configuration No. Wavetrend Technologies Ltd Issue Date Page 25042002 REV 2.3 User Manual 25TH APRIL 2012 17 OF 30 USER MANUAL Active RFID Tags

 Glass cleaner

 Clean dry cloth 2.3.2 Preparation

 Clean an area a little larger than the tag on an object. Ensure that no dust, oil, grease or residue remains.

 Position the gel pad over the back of the tag and align the hole in the pad with the embossed circle on the tag. Remove the gel pad cover and stick the gel pad to the back of the tag. Make sure the hole in the pad and the circle on the back of the tag are aligned. 2.3.3 Arming the anti-tamper (if using the TATGP-AT attachment kit)

 Once the gel pad is stuck firmly to the tag insert the small magnet into the pad and press around it. Make sure the magnet has stuck firmly to the pad in the hole. The tags anti-tamper is now armed.

It is recommended to place a spot of Superglue or other suitable adhesive on the magnet so that it will adhere to the asset surface and be able to trigger a tamper alert more quickly should any unauthorized attempt be made to remove a tag from its asset. Do not glue the magnet to the back of the tag; this will prevent the anti-tamper feature from working. 2.3.4 Final steps

 Remove the other cover from the gel pad and position the tag in a suitable location on the asset. Press firmly and ensure no air bubbles remain visible.

 The gel pad will take up to 24 hours to cure to full bond strength. 2.4 Removing the TGP The tag may require removal from the object either at the end of its functional life, or in instances where the tag has been damaged, or where the asset is at end of its life cycle and must be replaced or disposed of. In the case of asset replacement or disposal and where the tag is still fully functional, the tag can be installed onto a new asset with a new gel pad. 2.4.1 Requirements

 1 thin, flat instrument or blade, such as a dinner table knife 2.4.2 Removal

 Carefully insert the blade into the gel pad repeatedly, working all the way around the edge of the tag.

 Repeat this as many times as it take to loosen enough of the gel pad around the edge of the tag to allow gentle twisting or rotation of the tag in a clock-wise then anti-clockwise manner. Use the blade to continue loosening or breaking up the gel pad to allow greater rotation of the tag.

 Continue to twist the tag until it comes off the object. Notes:

The anti-tamper feature will cause the tag to alarm immediately if any attempt is made to remove the tag before the end of its functional lifespan. Do not try to pull the tag off the object when removing it, the best way to break down the bond between the gel pad and the tag & object is to rotate the tag clockwise and anti-clockwise repeatedly. Document No. Configuration No. Wavetrend Technologies Ltd Issue Date Page 25042002 REV 2.3 User Manual 25TH APRIL 2012 18 OF 30 USER MANUAL Active RFID Tags

 Continue to twist the tag until it comes off the object. Notes:

The anti-tamper feature (if used) will cause the tag to alarm immediately if any attempt is made to remove the tag before the end of its functional lifespan. Do not try to pull the tag off the object when removing it, the best way to break down the bond between the gel pad and the tag & object is to rotate the tag clockwise and anti-clockwise repeatedly. Document No. Configuration No. Wavetrend Technologies Ltd Issue Date Page 25042002 REV 2.3 User Manual 25TH APRIL 2012 19 OF 30 USER MANUAL Active RFID Tags 3 THE TGA ASSET TAG The TGA Asset tag is specially designed for use in asset tagging applications such as containers, vehicles and transport media where the tag must be water proof and capable of withstanding extremely harsh treatment. The TGA is optimized to operate on metal assets however it can be used equally well on non metallic assets as well. The TGAHZ can be used in exactly the same applications as the TGA but in addition holds the ATEX, IECEx certifications. 3.1 Important Facts about the TGA Tag

 The tag should be installed directly onto metal surfaces to obtain the best read range performance from the tag.

 The tag has an Omni directional antenna. When mounted on metal it can be read through 180 degrees , when mounted on plastic it can be read from the full 360 degrees.

 Attaching the tag to plastic or other non-metal surfaces will reduce the maximum read range the tag can provide by approximately 10%

 The tag can a movement sensor in Active versions TGA-MS, in Active Duo TGA-A it operates in three different modes, the standard operation mode that transmits its data with Status Tx rate, the movement alert operation mode that transmits with the Alert Tx rate when its movement sensor senses any movement or vibration of the tag, and the tamper alert mode if the tag is fixed to an object with Anti-

Tamper kit.

 The tag is rated to operate in ambient temperatures between -30oC and +90oC, using the tag in ambient temperatures beyond this range will cause damage to the tag and possibly cause its complete failure.

 The Nema standard IP rating of the TGP tag is 67, which means it is dustproof and waterproof but is not capable of being submerged deep in water. Using the tag in harsher conditions will cause damage to the tag and possibly cause its complete failure. 3.2 TGAHT The TGAHT extends the operating temperature range of the TGA, allowing it to in ambient temperatures between -30oC and +90oC, using the tag in ambient temperatures beyond this range will cause damage to the tag and possibly cause its complete failure. The TGA holds the ATEX, IECEx certifications. 3.3 TGAE The TGAHT extends the IP rating and the temperature range of the TGA, allowing it to in ambient temperatures between -30oC and +90oC, using the tag in ambient temperatures beyond this range will cause damage to the tag and possibly cause its complete failure. The Nema standard IP rating of the TGAE tag is 68, which means it is dustproof and waterproof and is capable of being submerged in water to a depth of 2 meters. The TGAE holds the ATEX, IECEx certifications. Document No. Configuration No. Wavetrend Technologies Ltd Issue Date Page 25042002 REV 2.3 User Manual 25TH APRIL 2012 20 OF 30 Note: Using this tag for an incorrect application can significantly reduce the read range the tag provides, possibly to the point that no signal from the tag can be received at all. This manual gives instructions for the correct method and location to attach the tag; failure to follow these instructions will result in impaired operation or even the complete loss of tag signals. USER MANUAL Active RFID Tags 3.4 Attaching the TGA for Tracking Containers and Other Assets 3.4.1 Requirements

 TGA tag (comes with VHB foam-gel pad attached)

 Anti-tamper Kit

 Glass cleaner

 Clean dry cloth 3.4.2 Preparation

Clean an area a little larger than the tag on an object. Ensure that no dust, oil, grease or residue remains.

 Position the gel pad over the back of the tag and align the hole in the pad with the embossed circle on the tag. Remove the gel pad cover and stick the gel pad to the back of the tag. Make sure the hole in the pad and the circle on the back of the tag are aligned. 3.4.3 Arming the anti-tamper (if using the TATGA-AT attachment kit)

 Once the gel pad is stuck firmly to the tag insert the small magnet into the pad and press around it. Make sure the magnet has stuck firmly to the pad in the hole. The tags anti-tamper is now armed.

It is recommended to place a spot of Superglue or other suitable adhesive on the magnet so that it will adhere to the asset surface and be able to trigger a tamper alert more quickly should any unauthorized attempt be made to remove a tag from its asset. Do not glue the magnet to the back of the tag; this will prevent the anti-tamper feature from working. 3.4.4 Final steps

 Remove the paper cover from the gel pad on the back of the tag and position the tag in a suitable location on the asset. Press firmly to ensure a firm bond.

 The gel pad will take up to 24 hours to cure to full bond strength.

 For all assets that will be driven or transported and/or which may experience rough handling and/or cleaning with high pressure water jets it is strongly recommended to fix the TGA tag to the asset with screws or rivets in addition to the VHB gel pad. 4mm diameter screws or rivets are suitable.

It is helpful to first attach the tag to the asset using the VHB pad and then to drill the required holes for the screws or rivets as the tag will be held in the correct location by the VHB pad while you are working. 3.5 Removing the TGA The tag may require removal from the object either at the end of its functional life, or in instances where the tag has been damaged, or where the asset is at end of its life cycle and must be replaced or disposed of. In the case of asset replacement or disposal and where the tag is still fully functional, the tag can be installed onto a new asset with a new VHB pad and screws/rivets. Document No. Configuration No. Wavetrend Technologies Ltd Issue Date Page 25042002 REV 2.3 User Manual 25TH APRIL 2012 21 OF 30 USER MANUAL Active RFID Tags 3.5.1 Requirements

 1 strong, flat tipped instrument, such as a flat head screw driver

 Drill or screw driver to remove any rivets or screws used to fix the tag to the asset 3.5.2 Removal

 For plastic assets or assets made of softer metal, it is highly likely that some surface damage could occur during removal of the tag. Take as much care as possible to avoid this by working carefully to break the VHB bond and use an instrument that is less likely to gouge or scratch the asset surface.

 First remove any fixing screws or drill out any rivets used to fix the tag to the asset.

 Carefully work the flat tipped instrument (screwdriver) under the tag.

 Break the adhesive bond by leveraging the tag off the asset slowly, adjusting the position of the instrument to the left and then to the right repeatedly, working all the way around the edge of the tag to loosen the VHB bond.

 Repeat this as many times as it take to loosen enough of the gel pad around the edge of the tag to allow gentle twisting or rotation of the tag in a clock-wise then anti-clockwise manner or to lift the tag by one edge. Use the blade to continue loosening or breaking up the gel pad to allow greater rotation of the tag.

 Continue to twist and lift the tag until it comes off the object. Notes:

The anti-tamper feature will cause the tag to alarm immediately if any attempt is made to remove the tag before the end of its functional lifespan. Do not try to pull the tag off the object when removing it, the best way to break down the bond between the gel pad and the tag & object is to rotate the tag clockwise and anti-clockwise repeatedly. Document No. Configuration No. Wavetrend Technologies Ltd Issue Date Page 25042002 REV 2.3 User Manual 25TH APRIL 2012 22 OF 30 USER MANUAL Active RFID Tags 4 THE TGM MICRO TAG The TGM Micro tag is specially designed for use in asset tagging applications such as laptops, IT equipment, vehicles and transport media. The TGM is optimized to operate on metal assets however it can be used equally well on non metallic assets as well. 4.1 Important Facts about the Micro Tag

 The tag has an Omni directional antenna. When mounted on metal it can be read through 180 degrees, when mounted on plastic it can be read from the full 360 degrees.

 Attaching the tag to plastic or other non-metal surfaces will reduce the maximum read range the tag can provide by approximately 10%

 The tag can a movement sensor in Active versions TGM-MS, in Active Duo TGM-A it operates in three different modes, the standard operation mode that transmits its data with Status Tx rate, the movement alert operation mode that transmits with the Alert Tx rate when its movement sensor senses any movement or vibration of the tag, and the tamper alert mode if the tag is fixed to an object with Anti-

Tamper kit.

 The tag is rated to operate in ambient temperatures between -30oC and +90oC, using the tag in ambient temperatures beyond this range will cause damage to the tag and possibly cause its complete failure.

 The Nema standard IP rating of the TGM tag is 64, which means it is protected against dust and splashing water. Using the tag in harsher conditions will cause damage to the tag and possibly cause its complete failure. Note: Using this tag for an incorrect application can significantly reduce the read range the tag provides, possibly to the point that no signal from the tag can be received at all. This manual gives instructions for the correct method and location to attach the tag; failure to follow these instructions will result in impaired operation or even the complete loss of tag signals. 4.2 Attaching the TGM for Tracking IT Equipment and Other Assets 4.2.1 Requirements

 TGM tag

 1 adhesive gel pad (& magnet) from a 10-pack TAM or TAM-AT Attachment Kit

 Glass cleaner

 Clean dry cloth 4.2.2 Preparation

 Clean an area a little larger than the tag on an object. Ensure that no dust, oil, grease or residue remains.

 Position the gel pad over the back of the tag and align the hole in the pad with the embossed circle on the tag. Remove the gel pad cover and stick the gel pad to the back of the tag. Make sure the hole in the pad and the circle on the back of the tag are aligned. 4.2.3 Arming the anti-tamper (if using the TAM-AT attachment kit)

 Once the gel pad is stuck firmly to the tag insert the small magnet into the pad and press around it. Make sure the magnet has stuck firmly to the pad in the hole. The tags anti-tamper is now armed.

It is recommended to place a spot of Superglue or other suitable adhesive on the magnet so that it will adhere to the asset surface and be able to trigger a tamper alert more quickly should any Document No. Configuration No. Wavetrend Technologies Ltd Issue Date Page 25042002 REV 2.3 User Manual 25TH APRIL 2012 23 OF 30 USER MANUAL Active RFID Tags unauthorized attempt be made to remove a tag from its asset. Do not glue the magnet to the back of the tag; this will prevent the anti-tamper feature from working. 4.2.4 Final steps

 Remove the other cover from the gel pad and position the tag in a suitable location on the asset. Press firmly and ensure no air bubbles remain visible.

 The gel pad will take up to 24 hours to cure to full bond strength.

If fitting the tag to the asset using screws or rivets with the VHB gel pad it is helpful to first attach the tag to the asset using the gel pad and then to drill the required holes for the screws or rivets as the tag will be held in the correct location by the VHB pad while you are working. If fitting the tag to the asset using screws or rivets without the VHB gel pad, mark the centre of each hole using the tags fixing holes as your guide.

 Then to drill the required holes for the screws or rivets and fix the tag to the asset using the screws or rivets. 4.3 Removing the TGM The tag may require removal from the object either at the end of its functional life, or in instances where the tag has been damaged, or where the asset is at end of its life cycle and must be replaced or disposed of. In the case of asset replacement or disposal and where the tag is still fully functional, the tag can be installed onto a new asset with a new gel pad. 4.3.1 Requirements

 1 thin, flat instrument or blade, such as a dinner table knife 4.3.2 Removal

 For plastic assets or assets made of softer metal, it is highly likely that some surface damage could occur during removal of the tag. Take as much care as possible to avoid this by working carefully to break the VHB bond and use an instrument that is less likely to gouge or scratch the asset surface.

 Carefully insert the blade into the gel pad repeatedly, working all the way around the edge of the tag.

 Repeat this as many times as it take to loosen enough of the gel pad around the edge of the tag to allow gentle twisting or rotation of the tag in a clock-wise then anti-clockwise manner. Use the blade to continue loosening or breaking up the gel pad to allow greater rotation of the tag.

 Continue to twist the tag until it comes off the object. Notes:

The anti-tamper feature (if used) will cause the tag to alarm immediately if any attempt is made to remove the tag before the end of its functional lifespan. Do not try to pull the tag off the object when removing it, the best way to break down the bond between the gel pad and the tag & object is to rotate the tag clockwise and anti-clockwise repeatedly. Document No. Configuration No. Wavetrend Technologies Ltd Issue Date Page 25042002 REV 2.3 User Manual 25TH APRIL 2012 24 OF 30 APPENDIX A. DOCUMENT INFORMATION AMENDMENT HISTORY USER MANUAL Active RFID Tags Issue Date Amendment Details Amended By 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 22nd August 2011 24th August 2011 First Draft , further tags to be added Will Damerell Second draft ATEX amendments Will Damerell 26th August 2011 ATEX label changes 1st September 2011 Cleaning instructions added and label changes. 2nd September 2011 ATEX amendments 9th September 2011 Temperature changes to TGA 12th September 2011 Temperature changes to TGA 13th September 2011 ATEX Label changes 22nd September 2011 Approval changes 23rd September 2011 Approval Changes 17th November 2011 Approval Changes 05th December 2011 Approval changes Will Damerell Will Damerell Will Damerell Will Damerell Will Damerell Will Damerell Will Damerell Will Damerell Will Damerell Will Damerell Table 2: Amendment History APPROVALS Number Name Designation Date Signature 1. 2. 3. 4. 5. Table 3: Approvals Document No. Configuration No. Wavetrend Technologies Ltd Issue Date Page 25042002 REV 2.3 User Manual 25TH APRIL 2012 25 OF 30 USER MANUAL Active RFID Tags APPENDIX B. CERTIFICATIONS The Wavetrend Active Tag range hold the following Certifications CE ETSI EN 300 220 Class 7a Effected Radiated Power (Carrier) ETSI EN 300 220 ETSI EN 300 220 ETSI EN 300 220 Effected Radiated Power (Spurious Emissions) Range of modulation bandwidth for wide band equipment Frequency stability under low voltage conditions BS EN55022 Class B Emissions Standard for domestic and light industrial environments BS EN61000-4-2 1995 ESD Requirements BS EN61000-4-3 2006 Radiated Susceptibility ATEX ATEX directive 94/9/EC EMC directive 2004/108/EC Low Voltage Directive 2006/95/EC Based on the following harmonised standards:

EN60079-0:2006 EN60079-26:2007 EN61241-11:2006 EN60079-11:2007 EN61241-0:2006 EN300 220-2 V2.12(2007-2006) And therefore complies with all of the relevant essential requirements of those directives. The following Notified Body has been involved in the conformity assessment process:

Notified Body TRaC Global Ltd Notified Body No. 0891 Role:

Issue of ATEX EC Type Examination certificate Certificate No. TRAC11ATEX11298X Additional information:

TGPHZ ATEX coding II 1 G D Ex ia IIC T4 Ga Ex iaD 20 IP64 T60C Da I M Ex ia I Limitations on use See ATEX EC Type Examination certificate Document No. Configuration No. Wavetrend Technologies Ltd Issue Date Page 25042002 REV 2.3 User Manual 25TH APRIL 2012 26 OF 30 USER MANUAL Active RFID Tags TGAHZ ,TGAHT,TGAE ATEX coding II 1 G D Ex ia IIC T4 Ga Ex iaD 20 IP64 T90C Da I M Ex ia I Limitations on use See ATEX EC Type Examination certificate Document No. Configuration No. Wavetrend Technologies Ltd Issue Date Page 25042002 REV 2.3 User Manual 25TH APRIL 2012 27 OF 30 USER MANUAL Active RFID Tags APPENDIX C. ELECTRICAL SPECIFICATIONS The Electrical characteristics are summarised below by Tag type Tag Type Battery Type Battery Voltage Battery Capacity TGP TGPS TGPHZ TGA TGAHT TGAHZ TGAE TGM CR2450 CR2430 CR2430 CR2450 CR2450HR CR2450 CR2450HR CR1632 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 620 mah 300 mah 620 mah 620 mah 550 mah 620 mah 550 mah 140 mah It should be noted that it is not possible to change the batteries in any Wavetrend Tags . Document No. Configuration No. Wavetrend Technologies Ltd Issue Date Page 25042002 REV 2.3 User Manual 25TH APRIL 2012 28 OF 30 APPENDIX D. ATEX TAG LABELLING Tag labelling USER MANUAL Active RFID Tags TGPHZ ATEX labelling Document No. Configuration No. Wavetrend Technologies Ltd Issue Date Page 25042002 REV 2.3 User Manual 25TH APRIL 2012 29 OF 30 TGAHZ ATEX labelling USER MANUAL Active RFID Tags TGAHT ATEX labelling TGAE ATEX labelling Document No. Configuration No. Wavetrend Technologies Ltd Issue Date Page 25042002 REV 2.3 User Manual 25TH APRIL 2012 30 OF 30