FCC ID: 2AXTM-UFR118 alarm

The infrared thermometer you purchased is a creative product which a Bluetooth chip is implanted, it can transmit the measurement data to all devices with BT5.0 via Bluetooth wireless transmission technology. Please read the quick guide carefully before you use the Bluetooth function, and keep it well after using. Quick guide of Bluetooth function 1.Please download the software which named

"Bluetooth Thermometer" from APP Store, and install it in your APPLE products, please set the system language of your APPLE products to match the different language version. 2. Open the software, click the "Portrait" button on the upper left to enter the user information interface to create new user information. After entering the user information, click "OK" to save. 3.The infrared thermometer automatically enters the state of waiting for Bluetooth pairing at this time. At this time, click the Bluetooth symbol at the upper right it will flash for a few seconds to achieve Bluetooth pairing. When the flashing stops, the Bluetooth symbol will turn blue, which means that the device has been successfully connected. If the device is not connected successfully, please close the software and then reopen the software to connect NAME 4.During the measurement process, the data displayed by the infrared thermometer will be displayed in the software synchronously and automatically saved. 5.Click "Trend Graph", the interface will display your measured data in the form of graph(Can switch between Celsius and Fahrenheit) 6.Click "History", the interface will display your measured data in the form of time, click "Edit" on the upper right to share your measured data in the format of xlsx file through the file. NAME NAME NAME NAME NAME 1.Please go to the following URL to download the application software and install it on your Android device. 2. Open the software, click the "Portrait" button on the upper left to enter the user information interface to create new user information. After entering the user information, click "OK" to save. The infrared thermometer you purchased is a creative product which a Bluetooth chip is implanted, it can transmit the measurement data to all devices with BT5.0 and installed Android 4.3 or later via Bluetooth wireless transmission technology. Please read the quick guide carefully before you use the Bluetooth function, and keep it well after using. URL:http://fir.leijiaxq.top/3wrn 4.During the measurement process, the data displayed by the infrared thermometer will be displayed in the software synchronously and automatically saved. 5.Click "Trend Graph", the interface will display your measured data in the form of graph(Can switch between Celsius and Fahrenheit) 6.Click "History", the interface will display your measured data in the form of time, click "Edit" on the upper right to share your measured data in the format of xlsx file through the file. NAME NAME NAME NAME NAME Quick guide of Bluetooth function 3.The infrared thermometer automatically enters the state of waiting for Bluetooth pairing at this time. At this time, click the Bluetooth symbol at the upper right it will flash for a few seconds to achieve Bluetooth pairing. When the flashing stops, the Bluetooth symbol will turn blue, which means that the device has been successfully connected. If the device is not connected successfully, please close the software and then reopen the software to connect NAME FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AXTM-UFR118 Label and Location alarm Model No.: UFR118 FCC ID: 2AXTM-UFR118 Size: L2.0cm*W1.5cm Label Location This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1

Weitian industrial(shenzhen)co., Ltd Agent Authorization Company: Weitian industrial(shenzhen)co., Ltd Address: Room 406, no.9-1, xintang road, xintian community, fuhai street, baoan district, Shenzhen, China Product Name: alarm Trade Mark: /

Model Numbers: UFR118, WTR100, WTR101, WTR102, WTR103, WTR105 FCC ID: 2AXTM-UFR118 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Date: 2020-10-27 Signature:

Name:

Eric Liu Title:

Manager Company: Weitian industrial(shenzhen)co., Ltd

Weitian industrial(shenzhen)co., Ltd Add: Room 406, no.9-1, xintang road, xintian community, fuhai street, baoan district, Shenzhen, China Tel: 0755-27211770 Fax: 0755-27211770 Date: 2020-10-27 Dear Sir/Madam, We, Weitian industrial(shenzhen)co., Ltd Hereby declares the following statement , PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for marketing purpose:

Product name: alarm Models No.: UFR118, WTR100, WTR101, WTR102, WTR103, WTR105 Sincerely, Clients name / title : Eric Liu / Manager Contact information / address: Room 406, no.9-1, xintang road, xintian community, fuhai street, Tel: 0755-27211770 Fax: 0755-27211770 E-Mail: ericliu@aenoon.com baoan district, Shenzhen, China

Weitian industrial(shenzhen)co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2020-10-27 Subject; Request for Confidentiality FCC ID: 2AXTM-UFR118 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

Schematic Diagram Block Diagram Operational Description External Photos Test Setup Photos Internal Photos User Manual OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Eric Liu Title: Manager