FCC ID: 2AN6F-4218000 Device_UI_Pretech_651G

User manual

FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. from that to which the receiver is connected. for help. Connect the equipment into an outlet on a circuit different Consult the dealer or an experienced radio/TV technician Specific Absorption Rate (SAR) information:

This Device_UI_Pretech_651G meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types:

Device_UI_Pretech_651G has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the Device_UI_Pretech_651G kept 10mm from the body. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. ISED Statement English: This device complies with Industry Canada licenseexempt RSS standard(s). Operation is subject to the following two conditions:

(1)This device may not cause interference, and (2) This device must accept anyinterference, including interference that may cause undesired operation of the device.The digital apparatus complies with Canadian CAN ICES3(B)/NMB3(B). French: Le prsentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorise aux deux conditions suivantes: (1) l'appareil ne doit pas produire debrouillage, et (2)l'utilisateur de l'appareildoit accepter tout brouillageradiolectriquesubi, mmesi le brouillageest susceptible d'encompromettre le fonctionnement. the device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-

channel mobile satellite systems;

Les quipements fonctionnant dans la bande 5150-5250 MHz sont destins une utilisation intrieure uniquement afin de rduire les risques de brouillage prjudiciable pour les systmes mobiles par satellite dans le mme canal This radio transmitter (ISED certification number: 23338-4218000) has been approved by Industry Canada to operate with the antenna types listed with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le prsent metteur radio (ISED certification number: 23338-4218000) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. Specific Absorption Rate (SAR) information This device meets the government's requirements for Canada radiation exposure limits set forth for an uncontrolled environment. This device was tested for typical body-worn operations with the back of the phone kept 10 mm from the body. To maintain compliance with ISED RF exposure requirements, use accessories that maintain an 10 mm separation distance between the user's body and the back of the Device_UI_Pretech_651G. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with ISED RF exposure requirements, and should be avoided. le taux d'absorption spcifique (sar) Le prsentappareil rpond aux exigences du gouvernement du canada l'exposition limites indiques pour un autre environnement.ce dispositif a t test pour les oprations de ports avec le dos du tlphone a de 10 mm de l'organisme.indicateurs d'exposition aux champs rf pour maintenir la conformit aux exigences, l'utilisation des accessoires que maintenir une distance de sparation entre l'utilisateur 10 mm et l'arrire du tlphone intelligent.l'utilisation de la ceinture des clips, tuis et autres accessoires ne doit pas comportent des lments mtalliques dans l'assemble.l'utilisation d'accessoires qui ne remplissent pas ces conditions ne peuvent se conformer aux exigences organis l'exposition aux rf, et devrait tre vite. LE-LAN devices are restricted to indoor operation only in the band 5150-5250 MHz. However, original equipment manufacturer (OEM) devices, which are installed in vehicles by vehicles manufacturers, are permitted. L'quipement LE-LAN est limit l'exploitation intrieure dans la bande 5150-5250 MHz. Toutefois, les dispositifs du constructeur d

' quipement d ' origine (OEM) installs sur le vhicule par le constructeur sont autoriss.

Page 1 of 1 FCC ID:2AN6F-4218000 IC:23338-4218000 LABEL AND LOCATION Device_UI_Pretech_651G HVIN: 42-18000-0 FCC ID:2AN6F-4218000 IC:23338-4218000

(Size: L4.0cm x 3.0cm) Label Location Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: webmaster@lcs-cert.com | Web: www.lcs-cert.com Scan code to check authenticity

WHILL, Inc. 2-1-1 Higashishinagawa, Shinagawa-ku Tokyo Japan Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-12-21 To whom it may concern:

We, WHILL, Inc., hereby certify that the equipment for which authorization is sought

(FCC 1D: 2ANGF-4218000) is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered

(https://www foc. gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.914(b) and (4)(5) and (6). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 DO1 Sincerely, Lah rian Signature Tsuyoshi Iriyama WHILL, Inc.

Sincerely, Name/Title Tsuyoshi Iriyama/

Company:

Address:

Phone:

Fax:

E-Mail:

WHILL, Inc. 2-1-11 Higashishinagawa, Shinagawa-ku Tokyo Japan

+81-3-6718-4006

+81-3-6718-4007 global.ra@whill.inc

WHILL, Inc. 21-11 Higashishinagawa, Shinagawa-ku Tokyo Japan Date: 2023-12-21 FCC ID: 2AN6F-4218000 Model Number: 42-18000-0 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, We, WHILL, Inc,, declare that this FUT (FCC ID: 2AN6F-4218000) doesnt have Ad Hoc mode function on non-US/Canada frequencies. In addition. The frequency selection feature is disabled by firmware for devices marked to the US/Canada. For DTS part of this device, only channels 1-11 will be used in North America, Country code selection is disabled. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, rah i priya Name/Title: Tsuyoshi Iriyama/

Company: WHILL, Inc. Address: 2-1-11 Higashishinagawa, Shinagawa-ku Tokyo Japan Phone: +81-3-6718-4006 Fax: +81-3-6718-4007 E-Mail: global.ra@whill inc

WHILL, Ine. 2-1-1 Higashishinagawa, Shinagawa-ku Tokyo Japan Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-12-21 To whom it may concern:

We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behaffin all matters relating to applications for equipment authorization FCC ID: 2ANG6F-4218000 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins current valid General Terms and Conditions

(AGB),Testing and Certification Regulations (PZO) which can be viewed on following website wwweurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 Sincerely, rah i riya Name/Title: Tsuyoshi Iriyama/

Company: WHILL, Inc. Address: 2-1-11 Higashishinagawa, Shinagawa-ku Tokyo Japan Phone: +81-3-6718-4006 Fax: +81-3-6718-4007 E-Mail: global.ra@whill.ine

WHILL, Inc. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S. Agent Designation 12/15/2023 WHILL, Inc. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2AN6F-4218000):

Name and company of U.S. agent:

FCC US Agent, LLC Physical U.S. address of agent:

3722 Illinois Avenue, Saint Charles, IL, 60174, USA FRN of U.S. agent:

0033402884 Email address of U.S. agent:

Support@FCCUSAgent.com FCC US Agent, LLC acknowledges their obligation to accept service of process on behalf of WHILL, Inc.. WHILL, Inc. with the FRN 0026957001 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature Tsuyoshi Iriyama WHILL, Inc. 5 0 V

, U

) 7

) d

1 1 9

. 2 _ t n e g A _ S U

l e d o m

_ 8 4 Signature Tim Payne Manager FCC US Agent, LLC

WHILL, Inc. 2-1-11 Higashishinagawa, Shinagawa-ku Tokyo Japan UNII Device Declaration Letter To whom it may concern:

We have declared below featured for FCC equipment authorization, Device FCC ID: 2AN6F-4218000

(1)

(2)

(3)

(4)

(6) DFS Device: OMaster 1 Client with Radar detection capability RNA C Client without radar detection capability, Active / Passive Scanning , adhoc mode access point capability Active Scanning | passive scanning Frequency | (the device can | (where the device | Ad Hoc Mode Access point Band (MHz) | transmit a probe | is can listen only capability capability

(beacon with no probes) 5180-5240 | TT Yes rd No_| Byes | TJNo | T)Yes | INo | TTYes T RINo 5190-5230 | [Yes | KINo | MYes [ TINo | TlYes | RINo | TyYes | KINo. 6210-5210 | [Yes | KINo | MYes [ TINo | TiYes | INo | T1Yes | INo. 5745-5825 | [] Yes Byes | TINo [Ti Yes | INo [TT Yes | KINo 5755-5795 | [J Yes Byes | TINo [Ti Yes | INo | Tl Yes | KINo

[D<IS<I<}

zlz{z|

5775-6775 | [JYes Eyes | TINo _[ T)Yes | KINo | TlYes [ KiNo Country code selection ability [Yes BRINo Hfyes, pls explain how it was implemented:

Meet 15.202 requirement Byes ONo pls check below CA master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode itis able to select a channel and initiate a network by sending enabling signals to other devices BJA client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. O Apply & Does not apply

(apply, pls help to provide explanation on it was implement, and how software was controlled) Should you have any questions or comments regarding this matter, please have my best attention, Sincerely, Mahe Bryan

(Signed) Name/Title: Tsuyoshi Iriyama/

Company: WHILL, Inc. Address: 2-1-11 Higashishinagawa, Shinagawa-ku Tokyo Japan Phone: 4+81-3-6718-4006 Fax ++81-3-6718-4007 E-Mail: global.ra@uhill.inc