all | frequencies |
|
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 3.54 MiB | December 15 2023 | |||
1 |
|
Internal Photos 1 | Internal Photos | 5.36 MiB | December 15 2023 | |||
1 |
|
Internal Photos 2 | Internal Photos | 5.04 MiB | December 15 2023 | |||
1 |
|
Internal Photos 3 | Internal Photos | 1.06 MiB | December 15 2023 | |||
1 |
|
External Photos | External Photos | 1.17 MiB | December 15 2023 | |||
1 |
|
ID Label/Location Info | ID Label/Location Info | 91.24 KiB | December 15 2023 | |||
1 |
|
Agent Authorization | Cover Letter(s) | 20.47 KiB | December 15 2023 | |||
1 |
|
Attestation Statements 1 | Attestation Statements | 153.66 KiB | December 15 2023 | |||
1 |
|
Attestation Statements 2 | Attestation Statements | 154.05 KiB | December 15 2023 | |||
1 | Block Diagram | Block Diagram | December 15 2023 | confidential | ||||
1 |
|
Long term Confidentiality Letter | Cover Letter(s) | 91.32 KiB | December 15 2023 | |||
1 | Operational Description | Operational Description | December 15 2023 | confidential | ||||
1 |
|
RF Exposure Info | RF Exposure Info | 226.68 KiB | December 15 2023 | |||
1 | Schematics | Schematics | December 15 2023 | confidential | ||||
1 |
|
Test Report | Test Report | 1.22 MiB | December 15 2023 | |||
1 |
|
Test Setup Photos | Test Setup Photos | 487.74 KiB | December 15 2023 | |||
1 |
|
agent | Attestation Statements | 18.65 KiB | December 15 2023 |
1 | Users Manual | Users Manual | 3.54 MiB | December 15 2023 |
MICROWAVE OVEN HOOD COMBINATION OWNERS MANUAL MANUAL DEL PROPIETARIO DE LA COMBINACIN DE HORNO DE MICROONDAS Y CAMPANA Table of Contents/ndice MICROWAVE OVEN SAFETY............................................. 2 Microwave Oven Safety .................................................. 2 Internet Connectivity Guide for Connected Appliances Only .... 3 FCC Caution................................................................. 4 MICROWAVE OVEN MAINTENANCE AND CARE.................. 5 General Cleaning........................................................... 5 INSTALLATION INSTRUCTIONS ........................................ 7 REQUIREMENTS ............................................................. 7 Tools and Parts ............................................................. 7 Location Requirements ................................................... 9 Product Dimensions ....................................................... 9 Installation Dimensions ................................................. 10 Electrical Requirements ................................................ 10 INSTALLATION ............................................................. 11 Prepare Microwave Oven Hood Combination ..................... 11 Installation Types ......................................................... 11 Find the Cardboard Plate............................................... 11 Find the Wall Stud(s) .................................................... 12 Find the Flush Point...................................................... 13 Mark Upper Cabinet ..................................................... 14 Mark Rear Wall............................................................ 15 Drill holes in Upper Cabinet ............................................ 16 Drill holes in Rear Wall .................................................. 17 Attach Mounting Plate to Wall ......................................... 18 Rotate Blower Motor ..................................................... 19 Install Damper Assembly ............................................... 22 Install the Microwave Oven ............................................ 22 Complete Installation .................................................... 23 VENTING DESIGN SPECIFICATIONS................................ 24 Venting Design Specifications......................................... 24 SEGURIDAD DEL HORNO MICROONDAS......................... 27 Seguridad del Horno Microondas .................................... 27 Gua de Conectividad a Internet solo para Electrodomsticos Conectados ................................................................ 29 Precaucin de FCC ...................................................... 30 MANTENIMIENTO Y CUIDADO DEL HORNO MICROONDAS .............................................................. 31 Limpieza General......................................................... 31 INSTRUCCIONES DE INSTALACIN ................................ 33 REQUISITOS................................................................. 33 Herramientas y Piezas .................................................. 33 Requisitos de Ubicacin ................................................ 35 Dimensiones del producto ............................................. 35 Dimensiones de Instalacin ........................................... 36 Requisitos Elctricos .................................................... 37 INSTALACIN............................................................... 37 Preparar la combinacin de horno de microondas y campana.................................................................... 37 Tipos de Instalacin...................................................... 38 Encontrar plantilla de cartn ........................................... 38 Encontrar las vigas de pared .......................................... 38 Encontrar el Punto al Ras .............................................. 40 Marcar Gabinete Superior.............................................. 41 Marque la Pared Posterior ............................................. 42 Taladrar los orificios en el Gabinete Superior ..................... 43 Taladre orificios en la Pared Posterior............................... 44 Fije la Placa de Montaje a la Pared .................................. 45 Gire el Motor del Soplador ............................................. 46 Instale el Conjunto de la Compuerta................................. 49 Instalacin del horno de microondas ................................ 49 Complete la Instalacin ................................................. 50 ESPECIFICACIONES PARA EL DISEO DE LA VENTILACIN............................................................... 51 Especificaciones para el Diseo de la Ventilacin ............... 51 IMPORTANT:
Save for local electrical inspector's use. IMPORTANTE:
Guarde para tener a disposicin del inspector de electricidad local. W11646004A MICROWAVE OVEN SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word DANGER or WARNING. These words mean:
DANGER WARNING You can be killed or seriously injured if you don't immediately follow instructions. You can be killed or seriously injured if you dont follow instructions. All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed. IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances basic safety precautions should be followed, including the following:
WARNING: To reduce the risk of burns, electric shock, fire, injury to persons, or exposure to excessive microwave energy:
Read all instructions before using the appliance. Read and follow the specific PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY found in this manual. This appliance must be grounded. Connect only to properly grounded outlet. See GROUNDING INSTRUCTIONS found in this section. Install or locate this appliance only in accordance with the provided Installation Instructions. Some products such as whole eggs and sealed containers -
for example, closed glass jars - are able to explode and should not be heated in this oven. Use this appliance only for its intended use as described in the manual. Do not use corrosive chemicals or vapors in this appliance. This type of oven is specifically designed to heat, cook, or dry food. It is not designed for industrial or laboratory use. Do not immerse cord or plug in water. Keep cord away from heated surfaces. Do not let cord hang over edge of table or counter. Do not use replacement parts that have not been recommended by the manufacturer (e.g. parts made at home using a 3D printer). See door surface cleaning instructions in the Microwave Oven Maintenance and Care section. Liquids, such as water, coffee, or tea are able to be overheated beyond the boiling point without appearing to be boiling. Visible bubbling or boiling when the container is removed from the microwave oven is not always present. THIS COULD RESULT IN VERY HOT LIQUIDS SUDDENLY BOILING OVER WHEN THE CONTAINER IS DISTURBED OR A UTENSIL IS INSERTED INTO THE LIQUID. Do not operate any heating or cooking appliance beneath HOT CONTENTS CAN CAUSE SEVERE BURNS. DO this appliance. NOT ALLOW CHILDREN TO USE THE MICROWAVE. Use caution when removing hot items. Do not operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been damaged or dropped. This appliance should be serviced only by qualified service personnel. Contact nearest authorized service facility for examination, repair, or adjustment. Do not cover or block any openings on the appliance. Do not store this appliance outdoors. Do not use this product near water for example, near a kitchen sink, in a wet basement, near a swimming pool, or similar locations. Do not mount unit over or near any portion of a heating or cooking appliance. Do not mount over a sink. Do not store anything directly on top of the appliance surface when the appliance is in operation. Clean Ventilating Hoods Frequently - Grease should not be allowed to accumulate on hood or filter. When flaming foods under the hood, turn the fan on. Suitable for use above both gas and electric cooking equipment. Intended to be used above ranges with maximum width of 36" (91.44 cm). Do not touch or clean the heating plate after toast cooking, it is very hot. SAVE THESE INSTRUCTIONS 2 IMPORTANT SAFETY INSTRUCTIONS Use care when cleaning the vent-hood filter. Corrosive cleaning agents, such as lye-based oven cleaners, may damage the filter. To reduce the risk of fire in the oven cavity:
Do not overcook food. Carefully attend appliance when paper, plastic, or other combustible materials are placed inside the oven to facilitate cooking. Remove wire twist-ties from paper or plastic bags before placing bag in oven. If materials inside the oven ignite, keep oven door closed, turn oven off, and disconnect the power cord, or shut off power at the fuse or circuit breaker panel. Do not use the cavity for storage purposes. Do not leave paper products, cooking utensils, or food in the cavity when not in use. Oversized foods or oversized metal utensils should not be inserted in a microwave/toaster oven as they may create a fire or risk of electric shock. Do not clean with metal scouring pads. Pieces can burn off the pad and touch electrical parts involving a risk of electric shock. Do not use paper products when appliance is operated in the toaster mode. Do not store any materials, other than manufacturers recommended accessories, in this oven when not in use. Do not cover racks or any other part of the oven with metal foil. This will cause overheating of the oven. SAVE THESE INSTRUCTIONS PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY
(a) Do not attempt to operate this oven with the door open since
(c) Do not operate the oven if it is damaged. It is particularly open-door operation can result in harmful exposure to microwave energy. It is important not to defeat or tamper with the safety interlocks.
(b) Do not place any object between the oven front face and the door or allow soil or cleaner residue to accumulate on sealing surfaces. important that the oven door close properly and that there is no damage to the:
(1) Door (bent),
(2) Hinges and latches (broken or loosened),
(3) Door seals and sealing surfaces
(d) The oven should not be adjusted or repaired by anyone except properly qualified service personnel. Internet Connectivity Guide for Connected Appliances Only IMPORTANT: Proper installation of your appliance prior to use is your responsibility. Be sure to read and follow the installation instructions that came with your appliance. Connectivity requires Wi-Fi and account creation. App features and functionality are subject to change. Data rates may apply. Once installed, launch the app. You will be guided through the steps to set up a user account and to connect your appliance. You Will Need:
A home wireless router supporting Wi-Fi, 2.4 Ghz with WPA2 security. If you are unsure of your routers capabilities, refer to the router manufacturers instructions. The router to be on and have a live internet connection. The 10character SAID code for your appliance. The SAID code is either printed on a label on the appliance or found on the LCD screen. Federal Communications Commission (FCC) Compliance Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Industry Canada (IC) Compliance Notice This Device complies with Industry Canada License-exempt RSS standard(s). Operation is subject to the following two conditions:
1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. 3 Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. To comply with FCC and Industry Canada RF radiation exposure limits for general population, antenna(s) used for this transmitter must be installed such that a minimum separation distance of 20 cm is maintained between the radiator (antenna) and all persons at all times and must not be co-located or operating in conjunction with any other antenna or transmitter. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution Changes or modifications not expressly approved by Whirlpool Corporation could void the users authority to operate the equipment. The antenna(s) used for this transmitter must be installed such that a minimum separation distance of 20 cm is maintained between radiator (antenna) and all persons at all times and must not be co-located or operating in conjunction with any other antenna or transmitter. Part 15B compliance statements for digital devices:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates; uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The user manual for the end product must include the following information in a prominent location Instruction:
To comply with FCC RF radiation exposure limits for general population, the antenna(s) used for this transmitter must be installed such that a minimum separation distance of 20 cm is maintained between the radiator (antenna) and all persons at all times and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM Responsibilities to comply with FCC Regulations The rebel UI Modules have been certified for integration into products only by OEM integrators under the following conditions:
1. The antenna(s) must be installed such that a minimum separation distance 20 cm is maintained between the radiator (antenna) and all persons at all times. 2. The transmitter module must not be co-located or operating in conjunction with any other antenna or transmitter. As long as the two conditions above are met, further transmitter testing will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.) IMPORTANT: In the event that these conditions cannot be met (for certain configurations or co-location with another transmitter), then the FCC authorizations are no longer considered valid and the FCC ID cannot be used on the final product. in these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labelling This module is labelled with an FCC ID. If the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. In that case, the final end product must be labelled in a visible area or display the following:
Contains FCC ID: 2AC7Z-RIGEL The OEM of this module must only use the approved antenna(s), which have been certified with this module. The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module or change RF related parameters in the user manual of the end product. 4 MICROWAVE OVEN MAINTENANCE AND CARE General Cleaning IMPORTANT: Before cleaning, make sure all controls are off and the microwave oven is cool. Always follow label instructions on cleaning products. Soap, water, and a soft cloth or sponge are suggested first, unless otherwise noted. STAINLESS STEEL AND BLACK STAINLESS STEEL (on some models) NOTE: To avoid damage to stainless steel surfaces, do not use soap-filled scouring pads, abrasive cleaners, Cooktop Cleaner, steel-wool pads, gritty washcloths, or abrasive paper towels. Damage may occur to stainless steel surfaces, even with one-time or limited use. Rub in direction of grain to avoid damaging. Cleaning Method:
Affresh Stainless Steel Cleaners Part Number W10355016
(not included) or affresh Stainless Steel Cleaning Wipes Part Number W1055049 (not included):
See the Quick Start Guide for ordering information. Vinegar for hard water spots. MICROWAVE OVEN DOOR EXTERIOR Cleaning Method:
Glass cleaner and a soft cloth or sponge: Apply glass cleaner to soft cloth or sponge, not directly on panel. Affresh Kitchen Appliance Cleaners Part Number W10355010 (not included): See Online Ordering Information section from Quick Start Guide to order. NONSTICK CAVITY COATING (on some models) To avoid damage to the microwave oven cavity, do not use metal or sharp utensils or scrapers or any type of abrasive cleanser or scrubbers. MICROWAVE OVEN CAVITY To avoid damage to the microwave oven cavity, do not use soap-filled scouring pads, abrasive cleaners, steel-wool pads, gritty washcloths, or some paper towels. On stainless steel models, rub in direction of grain to avoid damaging. The area where the microwave oven door and frame touch when closed should be kept clean. Cleaning Method:
Average soil Mild, nonabrasive soaps and detergents:
Rinse with clean water and dry with soft, lint-free cloth. Heavy soil Mild, nonabrasive soaps and detergents:
Heat 1 cup (250 mL) of water for 2 to 5 minutes in microwave oven. Steam will soften soil. Rinse with clean water and dry with soft, lint-free cloth. Odors Lemon juice or vinegar:
Heat 1 cup (250 mL) of water with 1 tbs (15 mL) of either lemon juice or vinegar for 2 to 5 minutes in microwave oven. GREASE FILTERS Mild cleanser and scouring pad Dishwasher affresh is a registered trademark of Whirlpool, U.S.A. WIRE RACK Steel-wool pad Dishwasher TOAST PAN (on some models) Mild cleanser and scouring pad Dishwasher AIR FRY BASKET (on some models) Steel-wool pad Dishwasher IR SENSOR LENS (on some models) Lens cleaner and lint-free Swab Clean IR sensor lens when the display shows the cleaning reminder, wait until the product becomes idle and cools down. Or clean when necessary. See Clean the IR Sensor Lens section for more details. EMBEDDED HEATING PLATE (on some models) Glass cleaner and a soft cloth or sponge There is an embedded heating plate under the oven bottom on some models. After some cooking, the oven bottom glass becomes very hot
(see Online control guide for more details). Clean the glass after the Oven too hot disappeared on the display. PROBE (on some models) Soap and warm water A. Embedded Heating Plate The probe is a hand wash only item. Hold onto the rubber end, gently wash with soap and warm water. Rinse and dry well before storing. Place in a provided storage box for easy access. Keep the storage box clean of food and residue. See Quick Start Guide for more information. 5 A Clean The IR Sensor Lens: (on some models) The IR sensor is located on the right-side of the cavity top. Clean it when the display shows the cleaning reminder or manual clean if necessary. NOTE: Wait until the product becomes idle and cools down. To clean the IR sensor lens when reminder appearing:
1. Follow the instructions on display to clean. 2. Use the lens cleaner and lint-free swab to clean. 3. After cleaning, the IR shelter will be closed. 4. press CONFIRM/MENU key back to idle. NOTE: Press BACK key to exit the reminder if you do not clean the lens at the moment, the reminder will appear again in 7 days. Other functions will work as usual, except for the IR sensor cooking function. To clean the IR sensor lens daily:
If you find the IR sensor cooking function performance is not good, you can clean the IR lens at any time. 1. Press Settings key and arrow key until Clean & Maintenance submenu. 2. Use the arrow key to select IR Cleaning. And press CONFIRM/MENU key to select IR cleaning. 3. Use the lens cleaner and lint-free swab to clean the lens when the IR shelter is opened. 4. After cleaning, the IR shelter will be closed. 5. Press CONFIRM/MENU key back to idle. A. B. IR Sensor Lens lint-free swab with Lens Clean/Replace Grease Filter:
The grease filter is on the underside of the microwave oven. Clean monthly. To clean the grease filter:
Disconnect power. Remove the grease filter by pushing finger grips back and then pull down from the bottom plate, see illustration 1. Clean the grease filter with a mild cleanser and scouring pad, or clean it with dishwasher. After cleaning, dry it up, put the grease filter back to the bottom plate, the springs toward back, pushing finger grips back, until the two tongues are in position, see illustration 2. Illustration 1 To replace a new grease filter:
Disconnect power. Remove the grease filter by pushing finger grips back and then pull down from the bottom plate, see illustration 1. Replace a new grease filter by putting the grease filter to the bottom plate, the springs toward back, pushing finger grips back, until the two tongues are in position, see illustration 2. A. Bottom Plate B. Grease Filter C. Finger Grips Replacing Charcoal Filter:
The charcoal filter is behind the grease filter. It cannot be cleaned and should be replaced every 6 months, while the display shows the filter alert Change the Charcoal Filter and reset reminder in Settings. To replace the charcoal filter:
Disconnect power. Illustration 2 Remove the grease filter by pushing finger grips back and then pull down from the bottom plate and set aside, see illustration 1 . Remove the charcoal filter out of the bottom plate by pulling the four hooks out, see illustration 3. Replace the old charcoal filter with a new charcoal filter. Put the charcoal filter back to the bottom plate, insert the four hooks into the bottom plate holes. Put the grease filter back into the bottom plate and the springs toward the back. Push the finger grips back, until the two tongues are in position, see illustration 2. A. Tongues B. Finger Grip C. Grease Filter D. Spring 6 ABABCACBD To remove the filter alert and reset filters duration:
Illustration 3 After replacing the charcoal filter, to remove the filter alert on the display, retrieve another 6 months duration. Press Setting key, use Arrow key to select Cleaning and Maintenance submenu, press CONFIRM/MENU key to enter. Use Arrow key to select Reset filter submenu, press CONFIRM/MENU key to reset. The charcoal filter retrieves another 6 months duration now. NOTE: For roof venting and wall venting, the charcoal filter is not necessary, but the filter alert will still appear every 6 months. You can follow the above steps to remove the alert. A. Holes B. Hooks C. Charcoal Filter D. Bottom Plate INSTALLATION INSTRUCTIONS REQUIREMENTS Tools and Parts Tools Needed Measuring tape Pencil Scissors Masking tape or thumbtacks Drill No. 2 Phillips screwdriver Stud finder No. 3 Phillips screwdriver for 1/4-20 x 3" (76 mm) bolts 3/16" (5 mm), 3/8" (10 mm), 5/8" (16 mm) drill bits 3/4" (19 mm) hole saw Keyhole saw Diagonal wire cutting pliers 7/16" (11 mm) socket wrench (or box wrench) for 1/4" x 2"
(6.4 mm x 51 mm) lag screws 11/2" (38 mm) diameter hole drill bit for wood or metal cabinet Caulking gun and weatherproof caulking compound Duct tape. Materials Needed Standard fittings for wall or roof venting. See the Venting Design Specifications section. 7 BACD Parts Supplied Part Screw Pack Drawing Description Qty Where can find?
3/16-24 x 3" round-head bolts 2 1/4-20 x 3" flat-head bolts 2 A. Inner Form in the cavity Washers 3/16" toggle nuts 1/4" x 2" lag screws
#6 x 3/8" Sheet metal screws Power supply cord bushing Damper for wall or roof venting Spacer
(L*W*T: 40*10*1.6 mm) 2 2 4 2 1 1 8 B. Inside the Literature pack Damper Spacer 8 AB Cardboard Plate Upper cabinet template and Wall template Literature Pack Literature Mounting Pate Mounting plate 1 1 1 C. Outer Form in the Carton Check local codes. Check existing electrical supply. See Electrical Requirements. It is recommended that all electrical connections be made by a licensed, qualified electrical installer. NOTE:
The hardware items listed here are for wood studs. For other types of wall structures, be sure to use appropriate fasteners. Be sure to purchase only Whirlpool factory-certified parts and accessories for your appliance. Your installation may require additional parts. To order, see the Online Ordering Information section of the Quick Start Guide. Product Dimensions A. 297/8" (76.1 cm) B. 177/8" (45.4 cm) C. 121/8" (31.3 cm) Location Requirements Check the opening where the microwave oven will be installed. The location must provide:
Minimum installation dimensions. See the Installation Dimensions illustration. Minimum one 2" x 4" (5.1 x 10.2 cm) wood wall stud and minimum 3/8" (1 cm) thickness drywall or plaster/lath within cabinet opening. Support for weight of 150 lbs (68 kg) which includes microwave oven and items placed inside the microwave oven and upper cabinet. Grounded electrical outlet inside upper cabinet. See the Electrical Requirements section. NOTE:
Some models have a pocket handle. If installing the microwave near a right side wall, make sure there is at least 3"
(7.6 cm) of clearance between wall and microwave oven so you can grab the handle integrated inside the door. Some cabinet and building materials are not designed to withstand the heat produced by the microwave oven for cooking. Check with your builder or cabinet supplier to make sure that the materials used will not discolor, delaminate, or sustain other damages. Special Requirements For Wall Venting Installation Only:
Cutout must be free of any obstructions so that the vent fit properly and the damper blade opens freely and fully. For Roof Venting Installation Only:
If you are using a rectangular-to-round transition piece, the 3"
(7.6 cm) clearance needs to exist above the microwave oven so that the damper blade can open freely and fully. See Rectangular to Round Transition illustration in the Venting Design Specifications section. 9 CBAC Installation Dimensions NOTE: The grounded 3 prong outlet must be inside the upper cabinet. See the Electrical Requirements section. Exact dimensions may vary depending on type of range/cooktop below.
*36" (91.4 cm) is recommended for 72" (182.8 cm) installation height.
**30" (76.2 cm) is typical for 66" (167.6 cm) installation height.
***Measure from the back wall to where the front bottom surface of the microwave oven needs to be (Dimension A). For 12" (30.5 cm) to 123/4" (32 cm) cabinets, the microwave oven will protrude from the cabinet. For 123/4" (32 cm) to 13" (33 cm) cabinets, the microwave oven is flush to the cabinet. NOTE: It may be necessary to use a number of spacers, between the mounting plate and the wall, to achieve a more Flush appearance. See Attach Mounting Plate to Wall section for more details. If cabinets are deeper than 13" (33 cm), and up to 16"
(40.6 cm), use the bump out mounting kit, replacing the mounting plate supplied with the product. The bump out mounting kit
(part#- W11630300) is not provided. A.
(Bump out) 13" to 16"
(33 cm to 40.6 cm) deep B. Cabinet C. Bump out mounting bracket A. 2" x 4" (5.1 cm x 10.2 cm) wall stud B. Grounded 3 prong outlet C. Upper cabinet depth (with door)***
D. 36" (91.4 cm) recommended*
30" (76.2 cm) typical**
E. 30" (76.2 cm) minimum F. 72" (182.8 cm) recommended 66" (167.6 cm) minimum G. Flat back surface 181/4"
(46.3 cm) minimum To order, see the Online Ordering Information section of the Quick Start Guide. For cabinets with other dimensions, we suggest selecting other Whirlpool Products. Electrical Requirements WARNING
(Flush) 123/4" to 13" (32.3 cm to 33 cm) deep A. B. Cabinet C. Less than 123/4" (32.3 cm) deep D. Mounting plate 10 Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. Observe all governing codes and ordinances. Required:
A 120 V, 60 Hz, AC only, 15 A or 20 A electrical supply with a fuse or circuit breaker. Recommended:
A time-delay fuse or time-delay circuit breaker. A separate circuit serving only this microwave oven. BCFGDEADDBACBCAB GROUNDING INSTRUCTIONS INSTALLATION For a grounded, cord-connected appliance:
This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. WARNING: Improper connection of the equipment-
grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance: if it will not fit the outlet, have a proper outlet installed by a qualified electrician. SAVE THESE INSTRUCTIONS This device complies with Part 18 of the FCC Rules. Prepare Microwave Oven Hood Combination WARNING Excessive Weight Hazard Use two or more people to move and install or uninstall appliance. Failure to do so can result in back or other injury. 1. To avoid possible damage to the work surface, cover the work surface. 2. Remove cardboard plate from the outer foam in the carton. It is for upper-cabinet and wall installation. 3. Remove the screw pack from the inner foam in the cavity. 4. Remove the damper from the inner foam in the cavity. 5. Remove the literature pack from the outer foam in the carton. 6. Remove shipping materials, tape and film from microwave. 7. Remove the mounting plate from the inner foam in the cavity. 8. Tape the microwave oven door closed so that the door does not swing open while the microwave oven is being handled. NOTE: To avoid damage to the microwave oven, do not grip or use the door or door handle while the microwave oven is being handled. Installation Types This microwave oven is designed for adaptation to the following three types of ventilation, choose one type before installation. NOTE: For roof venting and wall venting, charcoal filter is not necessary, uninstall the charcoal filter before use. See the Complete Installation section for details. Recirculation
(Factory Default Setting) Wall Venting Roof Venting Find the Cardboard Plate The cardboard plate is used as wall template and upper-cabinet template. It is located on the outer foam in the carton. Find it before installation. 11 Find the Wall Stud(s) NOTE: If no wall studs exist within the cabinet opening, do not install the microwave oven. See illustrations in Possible Wall Stud Configurations. 1. Using a stud finder, locate the edges of the wall stud(s) within the opening. 2. Mark the center of each stud, and draw a plumb line down each stud center. See illustrations in Possible Wall Stud Configurations. Possible Wall Stud Configurations These depictions show examples of preferred installation configurations with the mounting plate. No Wall Studs at End Holes Figure 1 No Wall Studs at End Holes Figure 2 A. End holes (on mounting plate) B. Cabinet opening vertical centerline C. Wall stud centerlines D. Holes for lag screws E. Support tabs F. Mounting plate center markers NOTE: If wall stud is within 6" (15.2 cm) of the vertical centerline, only recirculation or roof venting installation can be done. A. End holes (on mounting plate) B. Cabinet opening vertical centerline C. Wall stud centerlines D. Holes for lag screws E. Support tabs F. Mounting plate center markers Wall Stud at End Holes Figure 3 Wall Stud at End Holes Figure 4 A. End holes (on mounting plate) B. Cabinet opening vertical centerline C. Wall stud centerlines D. Holes for lag screws E. Support tabs F. Mounting plate center markers A. End holes (on mounting plate) B. Cabinet opening vertical centerline C. Wall stud centerlines D. Holes for lag screws E. Support tabs F. Mounting plate center markers 12 AABCCDEEFAABCDEEFDA,DBCCEEFAA,DBEA,DCECF Find the Flush Point This product is designed to be flush with the cabinet, and the flush point should be found before installation. Don't install with the front of the microwave oven located behind the front of the cabinet/door. Flush to Cabinet door Flush to Cabinet door Don't install with the front of the microwave oven located behind the front of the cabinet/door. Don't install with the front of the microwave oven located behind the front of the cabinet/door. A. Cabinet door B. Cabinet C. Microwave oven door A. Cabinet door B. Cabinet C. Microwave oven door A. Cabinet door B. Cabinet C. Microwave oven door A. Cabinet door B. Cabinet C. Microwave oven door NOTE: The grille baffle will automatically open 30 degrees when the microwave oven uses the ventilation & cooking function. Do not install the microwave oven with the grille baffle behind the front of the cabinet/door otherwise it will block the air outlet. A. Cabinet B. Grille baffle A. Cabinet B. Grille baffle 13 ABCABCACBACB30oCabinetABBAABB Mark Upper Cabinet 1. Using a tape, measure clearly and mark the vertical centerline of the opening. Make sure it aligns with the vertical wall centerline. Flush to cabinet door A. Upper Cabinet Centerline B. Wall Centerline NOTE: The cardboard plate is fit for depth of 12" to 13",
(30.5 cm to 33.02 cm) cabinet installation, but need some adjustment for different depths. See the following steps 2, 3. If cabinets are deeper than 13" (33 cm), and up to 16"
(40.6 cm), use the bump out mounting kit, replacing the mounting plate supplied with the product. The bump out mounting kit (part#- W11630300) is not provided. If your cabinet is 12" to 123/4" (30.5 cm to 32.4 cm) depth, follow the step 2:
2. Place the cardboard plate against the bottom of the upper cabinet. NOTES:
Make sure the back edge of the cardboard plate aligns with the wall and back edge of upper cabinet. Make sure the center marks on the cardboard plate align with the upper cabinet centerline which draw in step 1. Make sure the arrow on the cardboard plate are facing out. A. Less than 12" (30.5 cm) deep B. Cabinet A. Front Edge of Cardboard Plate & Upper Cabinet Door B. Upper Cabinet & Cardboard Plate 0.75" (1.9 cm) Line C. Mounting plate D. Microwave oven door E. Cabinet If your cabinet depth is 123/4" to 13" (32.4 cm to 33 cm) depth:
3. Place the cardboard plate against the bottom of the upper cabinet. NOTES:
Make sure the front edge of the cardboard plate align with the front edge of upper cabinet. Make sure the center marks on the cardboard plate align with the upper cabinet centerline which draw in step 1. A.
(Flush) 123/4" to 13"
(32.4 cm to 33 cm) deep B. Cabinet A. Back Edge of Cardboard Plate & Back Edge of Upper Cabinet B. Upper Cabinet Centerline & Center Marks on Cardboard Plate A. Front Edge of Cardboard Plate & Front Edge of Upper Cabinet B. Upper Cabinet Centerline C. Arrows on Cardboard Plate D. Center Marks on Cardboard Plate NOTE: If the upper cabinet doors protrude from the upper cabinet, the cardboard can be adjusted outward to be flush with the upper cabinet door. For example the upper cabinet door is 0.75" (1.9 cm) thick, you can align the cardboard plate 0.75" (1.9 cm) line with the upper cabinet. 14 ABBABAABACDEABBACD 4. Use a pencil to mark the power cord hole and two mounting nut holes. Use a pencil to mark the wall venting hole (wall venting installation only), skip it if your unit is for recirculation or upper cabinet venting installation. A. Power Cord Hole B. Mounting Nut Holes 5. Use a pencil to mark the upper cabinet vent hole. This step can be skipped if your unit is using recirculation or wall venting installation. A. Back Edge of Upper Cabinet B. Wall Venting Hole C. Cardboard Plate NOTE:
If the front edge of the upper cabinet is lower than the back edge, lower the cardboard template so that its top is level with the front edge of the cabinet. A. Upper Cabinet Hole Mark Rear Wall The microwave oven must be installed on a minimum of 1 wall stud, preferably 2, using a minimum of 1 lag screw, preferably 2. See Find the Wall Stud(s) section for find the wall studs. 1. Use a pencil to mark the power cord hole and two mounting nut holes. A. Rear wall B. Cardboard plate C. Top of cardboard plate must align with front edge of cabinet D. Front edge of upper cabinet 3. Hold the cardboard plate on the rear wall while aligning the side center marks (B) on the cardboard plate with the vertical centerline draw in step 1. Make sure the cardboard plate is level, and that the top of the cardboard template is butted up against the bottom edge of the upper cabinet. A. Centerline 2. Align the center markers on the cardboard plate, to the centerline on the wall, making sure it is level, and that the top of the cardboard template is butted up against the back edge of the upper cabinet. (see following NOTE before making marks). A. Bottom Edge of Upper Cabinet & Top of the Cardboard Plate B. Side Center Marks on Cardboard Plate C. Centerline 15 ABAAA BCACBDBAC 4. Find and mark the two bottom position lines (A) on the cardboard plate. Drill holes in Upper Cabinet 1. Using a drill and the 3/4" (1.9 cm) hole saw, cut out the power cord hole (A). 2. Drill two mounting nut holes (B), which are 3/8" (10 mm) holes at points D and E on the cardboard template. These are for two 1/4-20 x 3" bolts and washers used to secure the microwave oven to the upper cabinet. A. Cardboard Plate Bottom Position Line 5. Using the bottom edge of the cardboard plate, align it with the two small lines (A), and draw a line (B) indicating where the bottom edge of the mounting plate (C) should be. A. Power Cord Hole B. Mounting Nut Holes NOTE: If upper cabinet is metal, the supply cord bushing needs to be installed around the supply cord hole as shown. A. Two Small Lines B. Cardboard Plate Bottom Line C. Bottom Edge of Mounting Plate 6. Draw four small circles using the A, B, H, and J holes. A. Metal cabinet B. Power supply cord bushing 3. Using a keyhole saw, cut out the rectangular roof venting cutout area. Skip this step if for recirculation venting or wall venting installation. A. Roof Venting Cutout Area 16 AABCA & B & H & J holesABABA Drill holes in Rear Wall 1. The mounting plate is located inside the outer foam in the cavity, take it out. A. Mounting Plate B. Outer Foam in the Carton 2. Attach the mounting plate to wall. Make sure the 4 holes on mounting plate align with the A, B, H & J holes marked in the Mark Rear wall section and the mounting plate center markers align with the Center Mark. NOTE: It may be necessary to use a number of the spacers, between the mounting plate and the wall, to achieve a more Flush appearance. See Attach Mounting Plate to Wall section for more details. Measure from the back wall to where the front bottom surface of the microwave oven needs to determine the number of spacers needed. 3. Drill holes at A, B, H, & J, if the Wall studs are not located A &
B hole, do not drill A & B hole, and follow the below instruction. In addition to being installed on at least 1 wall stud, the mounting plate must attach to the wall at both end holes. If the end holes are not over wall studs, use two 3/16-24 x 3" round head bolts with toggle nuts; if 1 end hole is over a wall stud, use 1 lag screw and one 3/16-24 x 3" round-head bolt with toggle nut; or if both end holes are over wall studs, use 2 lag screws. Following are 3 installation configurations. Installation for No Wall Studs at End Holes
(Figures 1 and 2 in Find the Wall Stud(s) section) 1. Drill 5/8" (1.6 cm) holes through the wall at both end holes marked in Step 3 of the Mark Rear Wall. 2. Drill 3/16" (5 mm) hole(s) into the wall stud(s) at the hole(s) marked in step 6 of the Mark Rear Wall. Refer to figures 1 and 2 in Possible Wall Stud Configurations in the Locate Wall Studs(s) section. Installation for Wall Stud at One End Hole
(Figure 3 in Find the Wall Stud(s) section) 1. Drill a 3/16" (5 mm) hole into the wall stud at the end hole 2. marked in Step 3 of the Mark Rear Wall. If installing on a second wall stud, drill a 3/16" (5 mm) hole into the wall stud at the other hole marked in Step 6 of the Mark Rear Wall. Refer to Figure 3 in Possible Wall Stud Configurations in the Locate all Stud(s) section. 3. Drill a 5/8" (1.6 cm) hole through the wall at the other end. Installation for Wall Studs at Both End Holes
(Figure 4 in Find the Wall Stud(s) section) 1. Drill 3/16" (5 mm) holes into the studs at the end holes marked in Step 3 of the Mark Rear Wall. 4. Using a keyhole saw, cut out the rectangular wall venting cutout area. Skip this step if for recirculation venting or roof venting installation. A. Mounting Plate B. A & B & H & J holes C. Mounting Plate Bottom Line D. Center Mark E. Mounting plate center markers A. Wall Venting Cutout Area 17 BAA BCDEA Attach Mounting Plate to Wall 1. Position mounting plate on the wall. NOTE: It may be necessary to use a number of the spacers, between the mounting plate and the wall, to achieve a more Flush appearance. Stick spacers before position mounting plate on the wall. Measure from the back wall to where the front bottom surface of the microwave oven needs to be to determine the number of spacers needed. No Wall Studs at End Holes (Figures 1 and 2 in Find the Wall Stud(s) section) NOTE: The mounting plate must be secured to the wall on at least 1 wall stud as well as at both ends. 1. With the support tabs of the mounting plate facing forward, insert 3/16-24 x 3" round-head bolts through both end holes of mounting plate. 2. Start toggle nuts on bolts from the back of the mounting plate. Leave enough space for the toggle nuts to go through the wall and to open. A. Mounting Plate B. 1/16" (1.6 mm) thickness Depth of cabinet Mounting plate 12" to 13"
(30.5 cm to 33 cm) 131/16" (33.2 cm) 131/8" (33.3 cm) Mounting plate Mounting plate + 4 pieces of spacer Mounting plate + 8 pieces of spacer 2. Secure the mounting plate to the wall at both end holes drilled into the wall studs and/or drywall using either 3/16-24 x 3"
round-head bolts and toggle nuts or 1/4 x 2" lag screws. Refer to illustrations in Possible Wall Stud Configurations in the Locate Wall Stud(s) section, and the following sections No Wall Studs at End Holes (Figures 1 and 2 in Find the Wall Stud(s) section) or Wall Stud at One End Hole (Figure 3 in Find the wall Stud(s) section) . Insert lag screws into both end holes. 3. 4. Check alignment of mounting plate, making sure it is level. 5. Secure the two end hole screws. 6. Secure the mounting plate to the wall at both H & J holes using two 1/4 x 2" lag screws. A. Mounting Plate B. H & J holes 18 A. 3/16-24 x 3" round-head bolt B. Mounting plate C. Spring toggle nut 3. Position mounting plate on the wall. 4. Push the 2 bolts with toggle nuts through the drywall, and finger tighten the bolts to make sure toggle nuts have opened against drywall. A. 3/16-24 x 3" round-head bolt B. Mounting plate C. Spring toggle nut D. Drywall 5. Insert lag screw(s) into the hole(s) drilled into wall stud(s) in Step 2 of Installation for No Wall Studs at End Holes in the Drill Holes in Rear Wall section. 6. Check alignment of mounting plate, making sure it is level. 7. Securely tighten all lag screws and bolts. BAABABCABCD Wall Stud at One End Hole (Figure 3 in Find the Wall Stud(s) section) 1. With the support tabs of the mounting plate facing forward, insert a 3/16-24 x 3" round-head bolt through the end hole that fits over the 5/8" (16 mm) hole drilled in step 3 of Installation for Wall Stud at One End Hole in the Drill Holes in Rear Wall section. 2. Start a toggle nut on the bolt from the back of the mounting plate. Leave enough space for the toggle nut to go through the wall and to open. 3. Position mounting plate on the wall. 4. Push the bolt with toggle nut through the drywall, and finger tighten the bolt to make sure toggle nut has opened against drywall. Insert a lag screw into the remaining end hole. If installing on a second wall stud, insert a lag screw into the other hole drilled in Step 2 of Installation for Wall Stud at One End Hole in the Drill Holes in Rear Wall section. 5. 6. 7. Check alignment of mounting plate, making sure it is level. 8. Securely tighten the lag screw(s) and bolt. Rotate Blower Motor This section include wall and roof venting installation, both venting installation need rotate blower motor, select one ventilation type before install the microwave oven. And follow the propriated instruction to rotate the blower motor. If for recirculation installation, no need to rotate the blower motor, this section can be skip. Rotate Blower Motor for Wall Venting Installation 1. Remove screws attaching damper plate to back of microwave oven, set the screws aside. A. Damper plate B. Screw 2. Turn and hold the damper plate vertically as shown. 3. Remove 2 blower screws attaching blower motor to the microwave oven, and set aside. A. Blower screws 4. Disconnect the blower motor wire from the connector. A. Blower motor wire B. Connector 5. Lift blower motor out of microwave oven, and set aside. A. Damper plate A. Blower motor 19 ABAAABA 6. Using diagonal wire cutting pliers, gently snip out the rectangular damper vent covers at the perforations. 10. Reattach the 2 blower screws into the recessed holes in the back of the microwave. A. Diagonal wire cutting pliers B. Rectangular damper vent cover 7. Hold the blower motor wire, put the wire through the blower motor bridge. A. Blower motor bridge B. Blower motor wire 8. Lower blower motor back into the microwave oven. Exhaust ports face the back of the microwave oven. A. Screws B. Holes 11. Check to make sure the 2 screws are secured properly in the blower motor screw holes, so that the motor cannot move. A. Exhaust Port 9. Reconnect the blower motor wire into the connector. A. Screws B. Blower motor screw holes 12. Return the damper plate to its original horizontal position. A. Blower motor wire B. Connector 20 A. Damper plate BAABAABABBABBA 13. Secure damper plate with 2 screws removed in Step 1. 3. Lower blower motor back into microwave oven. Exhaust ports face the top of microwave oven. A. Damper plate B. Screw WARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. 14. Plug in the microwave oven. Check if the vent fan runs with abnormal sounds, go back through the steps to see which step was skipped. Rotate Blower Motor for Roof Venting Installation 1. Repeat Steps 1 to 5 from Wall Venting Installation Only. 2. Using diagonal wire cutting pliers, gently snip out the rectangular vent covers on the damper plate at the perforations. A. Exhaust port IMPORTANT: If blower motor is not positioned with flat side facing the back of the microwave oven (as shown), performance will be poor. 4. Reconnect the blower motor wire into the connector. 5. Reattach the 2 blower screws into the recessed holes in the back of the microwave. 6. Check to make sure the 2 screws are secured properly in the blower motor screw holes, so that the motor cannot move. 7. Return the damper plate to its original horizontal position. A. Damper plate 8. Secure damper plate with screw removed in Step 1. A. Rectangular vent covers B. Diagonal wire cutting pliers A. Damper plate B. Screw 9. Repeat Step 14 from Wall Venting Installation Only. 21 ABBAAAAB Install Damper Assembly If for recirculation installation, no need to install the damper assembly, this section can be skip. And save it for future use. Install Damper Assembly for Wall Venting Installation 1. Check that damper blade moves freely and opens fully. 2. Position the damper assembly on the back of the microwave oven so that the damper blade hinge is at the top, and the damper blade opens away from the microwave oven. 3. Connect vent to damper assembly. A. Vent B. Damper assembly (under vent) Install the Microwave Oven WARNING Excessive Weight Hazard Use two or more people to move and install or uninstall appliance. Failure to do so can result in back or other injury. IMPORTANT: The control side of the microwave oven is the heavy side. Handle the microwave oven gently. 1. Place a washer on each 1/420 x 3" flat-head bolt and place inside upper cabinet near the 3/8" (10 mm) holes. 2. Make sure the microwave oven door is closed and taped shut. A. Back of microwave oven B. Damper assembly C. Damper blade D. #6 x 3/8" Sheet metal screws 3. Secure damper assembly with two #6 x 3/8" sheet metal screws. Install Damper Assembly for Roof Venting Installation 1. Check that damper blade moves freely and opens fully. 2. Insert damper assembly through the cabinet cutout so that the long tab of the damper assembly slides under the raised tabs of the damper plate. Then secure with #6 x 3/8" sheet metal screw. NOTE: The screw cannot be installed if the damper assembly is not positioned as shown. A. Raised tabs B. Damper assembly C. #6 x 3/8" Sheet metal screws D. Upper cabinet cutout E. Long tab F. Damper plate 3. Using 2 or more people, lift microwave oven and hang it on support tabs at the bottom of mounting plate. NOTE: To avoid damage to the microwave oven, do not grip or use the door or while the microwave oven is being handled. A. Mounting plate B. Support tabs 22 AB CDABCDEFABAB 4. With front of microwave oven still tilted, thread power supply cord through the power supply cord hole in the bottom of the upper cabinet. Avoid damage to the mounting nut, screw the bolts into the mounting nut holes around 1520 mm by hand first, make sure the bolts thread in properly. Then tighten with tools. 5. Rotate microwave oven up toward upper cabinet. NOTE: If venting through the wall, make sure the damper assembly fits easily into the vent in the wall cutout. 6. Push microwave oven against mounting plate and hold in 7. NOTE: If microwave oven does not need to be adjusted, skip steps 6 through 8. If adjustment is required, rotate microwave oven downward. Using 2 or more people, lift microwave oven off of mounting plate, and set aside on a covered surface. 8. Loosen mounting plate screws. Adjust mounting plate and retighten screws. 9. Repeat steps 3 through 6. 10. With the microwave oven centered, and with at least one person holding it in place, insert bolts through upper cabinet into microwave oven. Tighten bolts until there is no gap between upper cabinet and microwave oven. NOTES:
Some upper cabinets may require bolts longer or shorter than 3" (7.6 cm). Longer or shorter bolts are available at most hardware stores. Overtightening bolts may warp the top of the microwave oven. To avoid warping, wood filter blocks (installer to provide) may be added. The blocks must be the same thickness as the space between the upper cabinet bottom and the microwave oven. A. Bolts A. Bolt B. Mounting Nut Complete Installation 1. Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped. 2. Dispose of/recycle all packaging materials. WARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. 3. Plug microwave oven into grounded 3 prong outlet. 4. Reconnect power. 5. Check the operation of microwave oven by placing 1 cup
(250 mL) of water on the cavity and programming a cook time of 1 minute at 100% power. Test vent fan and exhaust by operating the vent fan. 6. Check the vent door if auto open. 7. If the microwave oven does not operate:
Check that a household fuse has not blown, or that a circuit breaker has not tripped. Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician. Check that the power supply cord is plugged into a grounded 3 prong outlet. See the User Instructions for troubleshooting information. 23 A15-20 mmAB A. Cabinet B. Microwave oven C. Wall or back of the cabinet D. 1/2"-3/4" (1.3-1.9 cm) VENTING DESIGN SPECIFICATIONS Venting Design Specifications This section is intended for architectural designer and builder/contractor reference only. NOTES:
Vent materials needed for installation are not provided with microwave hood combination. We do not recommend using a flexible metal vent. To avoid possible product damage, be sure to vent air outside, unless using recirculation installation. Do not vent exhaust air into concealed spaces, such as spaces within walls or ceilings, attics, crawl spaces or garages. For optimal venting installation, we recommend:
Using roof or wall caps that have backdraft dampers. Using a rigid metal vent. Using the most direct route by minimizing the length of the vent and number of elbows to provide efficient performance. Using uniformly sized vents. Using duct tape to seal all joints in the vent system. Using caulking compound to seal exterior wall or roof opening around cap. Not installing 2 elbows together, for optimal hood performance. If venting through the wall, be sure that there is proper clearance within the wall for the damper to open fully. 8. If for roof venting and wall venting, uninstall the charcoal filter before use, by following below steps. To uninstall the charcoal filter:
a. Disconnect power. b. Push the finger grips back and then pull down the grease filter from the bottom plate. Set aside the grease filter. Refer to the illustration 1 for more details. c. Pull the four hooks out to remove the charcoal filter from bottom plate. Refer to the illustration 2 for more details. d. Put the grease filter back into the bottom plate and the springs toward the back. Push the finger grips back, until the two tongues are in position, see illustration 1. Illustration 1 Illustration 2 A. Tongues B. Finger Grip C. Grease Filter D. Spring A. Holes B. Hooks C. Charcoal Filter D. Bottom Plate The installation is now complete. Save Installation Instructions for future use. A. The height from the highest point of the stove to the bottom of the microwave oven. Minimum Recommendation 121/8" (30.8 cm) 181/8" (46 cm) 24 ACBDBACDAABCD If venting through the roof, and rectangular-to-round transition is used, be sure there are at least 3" (7.6 cm) of clearance between the top of the microwave oven and the transition piece. See Rectangular-to-Round Transition illustration. Recommended Standard Fittings The following length equivalents are for use when figuring vent length. See the examples in Recommended Vent Length. A. Roof venting B. Roof cap C. Wall venting D. Wall cap Rectangular-to-Round Transition NOTE: The minimum 3" (7.6 cm) clearance must exist between the top of the microwave oven and the rectangular-to-round transition piece so that the damper can open freely and fully. A. Rectangular-to-round transition piece: 31/4" x 10" to 6" = 5 ft
(8.3 x 25.4 cm to 15.2 cm = 1.5 m) B. Roof cap: 31/4" x 10" = 24 ft (8.3 x 25.4 cm = 7.3 m) C. 90 elbow: 31/4" x 10" = 25 ft (8.3 x 25.4 cm = 7.6 m) D. 90 elbow: 6" = 10 ft (15.2 cm = 3 m) E. Wall cap: 31/4" x 10" = 40 ft (8.3 x 25.4 cm = 12.2 m) F. G. 90 flat elbow: 31/4" x 10" = 10 ft (8.3 x 25.4 cm = 3 m) Recommended Vent Length 45 elbow: 6" = 5 ft (15.2 cm = 1.5 m) A 31/4" x 10" (8.3 x 25.4 cm) rectangular or 6" (15.2 cm) round vent should be used. The total length of the vent system including straight vent, elbow(s), transitions and wall or roof caps must not exceed the equivalent of 140 ft (42.7 m) for either type of vent. See the Recommended Standard Fittings section for equivalent lengths. For best performance, use no more than three 90 elbows. To calculate the length of the system you need, add the equivalent lengths of each vent piece used in the system. See the following examples:
31/4" x 10" (8.3 x 25.4 cm) vent system = 73 ft (22.2 m) total A. Roof cap B. 6" (152 mm) minimum diameter round vent C. Elbow (for wall venting only) D. Wall cap E. 31/4" x 10" to 6" (8.3 x 25.4 cm to 15.2 cm) a rectangular-to-round transition piece F. Vent extension piece, at least 3" (7.6 cm) high G. 3" (7.6 cm) A. One 31/4" x 10" (8.3 x 25.4 cm) 90 elbow= 25 ft (7.6 m) B. 1 wall cap = 40 ft (12.2 m) C. 2 ft (0.6 m) + 6 ft (1.8 m) straight = 8 ft (2.4 m) D. 6 ft (1.8 m) E. 2 ft (0.6 m) 25 ABCDABCEFGDABCDEFGA BCDE 6" (152 mm) vent system = 73 ft (22.2 m) total A. Two 90 elbows = 20 ft (6.1 m) B. 1 wall cap = 40 ft (12.2 m) C. 1 rectangular-to-round transition piece = 5 ft (1.5 m) D. 2 ft (0.6 m) + 6 ft (1.8 m) straight = 8 ft (2.4 m) E. 6 ft (1.8 m) F. 2 ft (0.6 m) If the existing vent is round, a rectangular to round transition piece must be used. In addition, a rectangular 3" (7.6 cm) extension vent between the damper assembly and rectangular to round transition piece must be installed to keep the damper from sticking. 26 A BC DEF SEGURIDAD DEL HORNO MICROONDAS Su seguridad y la de los dems son muy importantes. Hemos incluido muchos mensajes importantes de seguridad en este manual y en su electrodomstico. Lea y obedezca siempre todos los mensajes de seguridad. Este es el smbolo de advertencia de seguridad. Este smbolo le llama la atencin sobre peligros potenciales que pueden ocasionar la muerte o una lesin a usted y a los dems. Todos los mensajes de seguridad irn a continuacin del smbolo de advertencia de seguridad y de la palabra PELIGRO o ADVERTENCIA. Estas palabras significan:
PELIGRO Usted puede morir o sufrir una lesin grave si no sigue de inmediato las instrucciones. ADVERTENCIA Si no sigue las instrucciones, puede morir o sufrir una lesin grave. Todos los mensajes de seguridad le dirn cul es el peligro potencial, cmo reducir las posibilidades de sufrir una lesin y lo que puede suceder si no se siguen las instrucciones. INSTRUCCIONES DE SEGURIDAD IMPORTANTES Al utilizar aparatos elctricos, se deben seguir siempre las precauciones bsicas de seguridad, entre las que se incluyen las siguientes:
ADVERTENCIA: Para minimizar el riesgo de quemaduras, choque elctrico, incendio, lesiones a las personas o exposicin a energa de microondas excesiva:
Lea todas las instrucciones antes de usar el electrodomstico. Lea y siga las PRECAUCIONES PARA EVITAR LA POSIBLE EXPOSICIN A ENERGA DE MICROONDAS EXCESIVA especficas que se muestran en este manual. Este electrodomstico debe estar conectado a tierra. Conctelo solamente a un contacto debidamente conectado a tierra. Consulte las INSTRUCCIONES DE CONEXIN A TIERRA que se muestran en esta seccin. Instale o ubique este electrodomstico solo segn las instrucciones de instalacin proporcionadas. Algunos productos, como los huevos enteros y los contenedores cerrados (por ejemplo, frascos de vidrio cerrados), pueden explotar y no deben calentarse en este horno. Utilice este electrodomstico solo para su uso previsto como se indica en este manual. No utilice qumicos corrosivos o vapores en este electrodomstico. Este tipo de horno se encuentra diseado especficamente para calentar, cocinar o secar alimentos. No est diseado para uso de laboratorio o industrial. EL CONTENIDO CALIENTE PUEDE PROVOCAR QUEMADURAS GRAVES. NO PERMITA QUE LOS NIOS USEN EL MICROONDAS. Tenga cuidado al retirar artculos calientes. No encienda el electrodomstico si el cable o enchufe se encuentran daados, no estn funcionando adecuadamente o han sufrido daos o cadas. Solo personal calificado debe realizar el mantenimiento del electrodomstico. Comunquese con el lugar ms cercano de servicio autorizado para su examen, reparacin o ajuste. No cubra ni bloquee ninguna abertura del electrodomstico. No almacene el electrodomstico en exteriores. No use este producto cerca del agua, por ejemplo, cerca de un fregadero, en un stano hmedo, o cerca de una piscina o lugares similares. No sumerja el cable ni el enchufe en agua. Mantenga el cable lejos de las superficies calientes. No deje que el cable cuelgue del borde de la mesa o del mostrador. No use piezas de repuesto que no hayan sido recomendadas por el fabricante (por ejemplo, piezas hechas en casa con una impresora 3D). Vea las instrucciones de limpieza de la superficie de la puerta en la seccin Mantenimiento y Cuidado del Horno Microondas. Los lquidos, como el agua, caf o t, pueden sobrepasar el punto de ebullicin sin que parezca que estn hirviendo. La ebullicin o las burbujas visibles no se encuentran siempre presentes al retirar el contenedor del horno microondas. ESTO PUEDE RESULTAR EN LQUIDOS MUY CALIENTES QUE HIERVEN REPENTINAMENTE AL MOVER EL CONTENEDOR O INSERTAR UN UTENSILIO EN EL LQUIDO. CONSERVE ESTAS INSTRUCCIONES 27 INSTRUCCIONES DE SEGURIDAD IMPORTANTES No ponga a funcionar ningn aparato de calefaccin ni de coccin debajo de este electrodomstico. No instale la unidad sobre un aparato de calefaccin o coccin, ni cerca de ninguna parte de este. No monte el electrodomstico sobre un fregadero. No almacene nada directamente encima de la superficie del electrodomstico mientras est en funcionamiento. Limpie las Campanas de Ventilacin con frecuencia No se debe dejar que la grasa se acumule en la campana o en el filtro. Al flamear los alimentos debajo de la campana, encienda el ventilador. Apto para uso sobre equipos de cocina a gas o elctricos. Para usarse sobre cocinas de 36" (91,44 cm) de ancho como mximo. No toque ni limpie la placa de calentamiento despus de la coccin con tostado, est muy caliente. Limpie el filtro de ventilacin con cuidado. Los agentes de limpieza corrosivos, como aquellos limpiadores de horno a base de leja, pueden daar el filtro. Para reducir el riesgo de incendio en la cavidad del horno:
No recueza los alimentos. Vigile el electrodomstico si utiliza papel, plstico u otros materiales combustibles dentro de este para facilitar la coccin. Retire las amarras de alambre de las bolsas de papel o plstico antes de introducirlas en el horno. Si algn material se incendia dentro del horno, mantengala puerta cerrada, apague el horno y desenchfelo o corte la corriente en el panel de fusibles o del disyuntor. No utilice la cavidad para almacenar objetos. No deje productos de papel, utensilios de cocina o alimentos en la cavidad cuando no se encuentre en uso. No deben insertarse en un horno microondas alimentos ni utensilios de metal demasiado grandes, ya que pueden constituir un riesgo de incendio o de choque elctrico. No lo limpie con estropajos de metal. Pueden quemarse partes del estropajo y tocar piezas elctricas, ocasionando un riesgo de choque elctrico. No utilice productos de papel cuando el electrodomstico funcione en modo tostador. No guarde ningn material diferente de los accesorios recomendados por el fabricante en este horno para mostrador cuando no est en uso. No cubra las parrillas ni ninguna otra parte del horno con papel de aluminio. Esto har que se recaliente el horno. CONSERVE ESTAS INSTRUCCIONES PRECAUCIONES PARA EVITAR UNA POSIBLE EXPOSICIN A UNA ENERGA EXCESIVA DE MICROONDAS
(a) No intente operar este horno si la puerta est abierta, ya que el funcionamiento con la puerta abierta puede resultar en una exposicin nociva a la energa del microondas. Es importante no anular ni alterar los bloqueos de seguridad.
(b) No coloque ningn objeto entre la cara frontal del horno y la puerta, ni permita que se acumule suciedad ni residuos de productos de limpieza en las superficies de sellado.
(c) No ponga a funcionar el horno si est daado. Es muy importante que la puerta del horno cierre de la manera adecuada y que no haya daos en:
(1) la puerta (doblada),
(2) las bisagras y cerraduras (rotas o flojas),
(3) los sellos de la puerta y en las superficies de sellado.
(d) El horno debe ser reparado o ajustado solo por personal de servicio calificado. 28 Gua de Conectividad a Internet solo para Electrodomsticos Conectados IMPORTANTE: Usted es responsable de instalar debidamente su electrodomstico antes del uso. Asegrese de leer y seguir las instrucciones de instalacin proporcionadas con su electrodomstico. La conectividad requiere Wi-Fi y la creacin de una cuenta. Las caractersticas y las funciones de la aplicacin estn sujetas a cambios. Es posible que se apliquen tarifas para transmisin de datos. Una vez instalada, inicie la aplicacin. Ser guiado por los pasos necesarios para configurar una cuenta de usuario y conectar su electrodomstico. Necesitar:
Un enrutador inalmbrico domstico que admita Wi-Fi, 2,4 GHz con seguridad WPA2. Si no est seguro de la capacidad de su router, consulte las instrucciones del fabricante del router. El router debe estar encendido y tener una conexin activa a Internet. El cdigo SAID de 10 caracteres para su electrodomstico. El cdigo SAID est impreso en una etiqueta en el electrodomstico o puede encontrarlo en la pantalla LCD. Aviso de Conformidad con la Comisin Federal de Comunicaciones (FCC) Este dispositivo cumple con la Parte 15 de las Reglas de la FCC. El funcionamiento est sujeto a las siguientes dos condiciones:
1. Este aparato no provocar interferencias nocivas y 2. Este aparato debe aceptar cualquier interferencia recibida, incluida una que pueda causar un funcionamiento no deseado. Los cambios o las modificaciones sin aprobacin expresa de la parte responsable del cumplimiento podran anular la autorizacin del usuario para operar el equipo. Aviso de Conformidad con Industry Canada (IC) Este Dispositivo cumple con las normas RSS Exentas de Licencia de Industry Canada. El funcionamiento est sujeto a las siguientes dos condiciones:
1. Es posible que este dispositivo no cause interferencia. 2. Este dispositivo debe aceptar cualquier interferencia, incluida aquella que pueda causar un funcionamiento no deseado del dispositivo. Segn la normativa de Industry Canada, este radiotransmisor solo puede operar con una antena de un tipo y mxima (o menor) ganancia aprobada para el transmisor por Industry Canada. Para reducir la potencial interferencia de radio para otros usuarios, el tipo de antena y su ganancia deben elegirse de modo que la potencia radiada isotrpicamente equivalente (e.i.r.p.) no sea mayor que la necesaria para una comunicacin satisfactoria. Para cumplir con los lmites de exposicin a radiacin RF de la FCC e Industry Canada para la poblacin general, las antenas usadas para este transmisor deben instalarse de modo que se mantenga una distancia de separacin mnima de 20 cm entre el radiador
(antena) y todas las personas en todo momento y no se debe ubicar ni operar junto con ninguna otra antena o transmisor. Si este equipo de hecho causa interferencia perjudicial a la recepcin de radio o televisin, lo cual se puede determinar apagando y encendiendo el equipo, se recomienda al usuario que intente corregir la interferencia con una de las siguientes medidas:
Reoriente o reubique la antena receptora. Aumente la separacin entre el equipo y el receptor. Conecte el equipo a un tomacorriente en un circuito diferente del que se usa para conectar el receptor. Consulte al distribuidor o a un tcnico en radio/TV con experiencia en caso de necesitar ayuda. 29 Precaucin de FCC Los cambios o las modificaciones sin aprobacin expresa de Whirlpool Corporation podran anular la autorizacin del usuario para operar el equipo. Las antenas usadas para este transmisor deben instalarse de modo que se mantenga una distancia de separacin mnima de 20 cm entre el radiador (antena) y todas las personas en todo momento y no se debe ubicar ni operar junto con ninguna otra antena o transmisor. Declaraciones de conformidad con la Parte 15B para dispositivos digitales:
NOTA: Este equipo ha sido evaluado y se determin que cumple con los lmites para un dispositivo digital de clase B, de acuerdo con la Parte 15 de las Reglas de la FCC. Estos lmites estn destinados a proporcionar una proteccin razonable contra interferencia perjudicial en una instalacin residencial. Este equipo genera, usa y puede irradiar energa de radiofrecuencia y, si no se instala y usa segn las instrucciones, puede causar interferencia perjudicial en las radiocomunicaciones. Sin embargo, no se garantiza que la interferencia no se produzca en una instalacin determinada. Si este equipo de hecho causa interferencia perjudicial a la recepcin de radio o televisin, lo cual se puede determinar apagando y encendiendo el equipo, se recomienda al usuario que intente corregir la interferencia con una de las siguientes medidas:
Reoriente o reubique la antena receptora. Aumente la separacin entre el equipo y el receptor. Conecte el equipo a un tomacorriente en un circuito diferente del que se usa para conectar el receptor. Consulte al distribuidor o a un tcnico en radio/TV con experiencia en caso de necesitar ayuda. El manual del usuario del producto final debe incluir la siguiente informacin en una instruccin que est en un lugar destacado:
Para cumplir con los lmites de exposicin a radiacin RF de la FCC e Industry Canada para la poblacin general, las antenas usadas para este transmisor deben instalarse de modo que se mantenga una distancia de separacin mnima de 20 cm entre el radiador
(antena) y todas las personas en todo momento y no se debe co-ubicar ni operar junto con ninguna otra antena o transmisor. Responsabilidades del OEM de cumplir con las Normativas de la FCC Los Mdulos UI rebel han sido certificados para su integracin en productos solamente por integradores OEM bajo las siguientes condiciones:
1. Las antenas deben instalarse de modo que se mantenga una distancia de separacin mnima de 20 cm entre el radiador (antena) y todas las personas en todo momento. 2. El mdulo transmisor no se debe ubicar ni operar junto con ninguna otra antena o transmisor. Siempre y cuando las dos condiciones anteriores se cumplan, no se requerirn otras pruebas del transmisor. Sin embargo, el integrador OEM es igualmente responsable de hacer pruebas a su producto final para cualquier requisito de conformidad adicional requerido con este mdulo instalado (por ejemplo, emisiones de dispositivos digitales, requisitos de PC perifricas, etc.). IMPORTANTE: En el caso de que no se puedan cumplir estas condiciones (para determinadas configuraciones o co-ubicacin con otro transmisor), las autorizaciones de la FCC dejarn de considerarse vlidas y la ID de la FCC no podr utilizarse en el producto final. En estas circunstancias, el integrador OEM ser responsable de volver a evaluar el producto final (incluido el transmisor) y de obtener una autorizacin de la FCC por separado. Etiquetas del Producto Final Este mdulo est etiquetado con una identificacin FCC. Si la ID de la FCC no est visible cuando el mdulo se instala dentro de otro aparato, el exterior del aparato dentro del cual se instale el mdulo tambin debe mostrar una etiqueta que mencione el mdulo incluido. En ese caso, el producto final deber etiquetarse en una zona visible o mostrar lo siguiente:
Contains FCC ID: 2AC7Z-RIGEL El OEM de este mdulo solo debe utilizar las antenas aprobadas, que han sido certificadas con este mdulo. El integrador OEM debe tener presente que no debe brindar informacin al usuario final sobre cmo instalar o retirar este mdulo de RF o cmo cambiar parmetros relacionados con RF en el manual del usuario del producto final. 30 MANTENIMIENTO Y CUIDADO DEL HORNO MICROONDAS Limpieza General IMPORTANTE: Antes de la limpieza, asegrese de que todos los controles estn apagados y que el horno microondas est fro. Siempre siga las instrucciones de las etiquetas de los productos de limpieza. En primer lugar, se sugiere el empleo de jabn, agua y una esponja o pao suave, salvo que se indique lo contrario. ACERO INOXIDABLE Y ACERO INOXIDABLE NEGRO (en algunos modelos) NOTA: Para evitar daos a las superficies de acero inoxidable, no use estropajos precargados con jabn, productos de limpieza abrasivos, Limpiador para Superficies de Coccin, estropajos de lana de acero, paos de lavar speros o toallas de papel abrasivas. Se podran producir daos en las superficies de acero inoxidable, incluso aunque solo se usen una vez o de forma limitada. Frote en la direccin de la veta para evitar daos. Mtodo de Limpieza:
Affresh Limpiador de Acero Inoxidable Nm. de Pieza W10355016 (no incluido) o Toallitas Limpiadoras de Acero Inoxidable affresh Nm. de Pieza W1055049 (no incluido):
Para obtener informacin sobre pedidos, consulte la Gua de Inicio Rpido. Vinagre para manchas de agua dura. EXTERIOR DE LA PUERTA DEL HORNO MICROONDAS Mtodo de Limpieza:
Limpiavidrios y un pao o una esponja a suave: Aplique el limpiavidrios en una esponja o pao suave, no directamente sobre el panel. Affresh para Cocina y Electrodomsticos, Nm. de Pieza W10355010 (no incluido): Para pedirlo consulte la Informacin de Pedidos en lnea de la Gua de Inicio Rpido. REVESTIMIENTO ANTIADHERENTE DE LA CAVIDAD (en algunos modelos) Para evitar daos en la cavidad del horno microondas, no use utensilios metlicos o afilados ni raspadores o cualquier tipo de limpiador o estropajo abrasivo. CAVIDAD DEL HORNO MICROONDAS Para evitar daos en la cavidad del horno microondas, no use estropajos precargados con jabn, limpiadores abrasivos, estropajos de lana de acero, paos de lavar speros o algunas toallas de papel. En los modelos de acero inoxidable, frote en la direccin de la veta para evitar daos. Se debe mantener limpia la zona donde la puerta del horno microondas hace contacto con el marco cuando est cerrada. Mtodo de Limpieza:
Suciedad promedio Jabones y detergentes suaves, no abrasivos:
Enjuague con agua limpia y seque con un pao suave que no deje pelusa. Suciedad profunda Jabones y detergentes suaves, no abrasivos:
Caliente 1 taza (250 ml) de agua durante 2 a 5 minutos en el horno microondas. El vapor ablandar la suciedad. Enjuague con agua limpia y seque con un pao suave que no deje pelusa. Olores Jugo de limn o vinagre:
Caliente 1 taza (250 ml) de agua con 1 cucharada (15 ml) de jugo de limn o vinagre durante 2 a 5 minutos en el horno microondas. FILTROS DE GRASA Producto de limpieza suave y estropajo Lavavajillas SOPORTE PARA CABLES Estropajo de lana de acero Lavavajillas TOSTADORA (en algunos modelos) Producto de limpieza suave y estropajo Lavavajillas CESTA PARA FRER SIN ACEITE (en algunos modelos) Estropajo de lana de acero Lavavajillas LENTE DEL SENSOR IR (en algunos modelos) Limpiador de lentes y Bastoncillo sin pelusa Limpie la lente del sensor IR cuando la pantalla muestre el recordatorio de limpieza, espere a que el producto se ponga en reposo y se enfre. O limpie cuando sea necesario. Consulte la seccin Limpiar la Lente del Sensor IR para ms detalles. PLACA DE CALENTAMIENTO EMPOTRADA (en algunos modelos) Limpiavidrios y un pao o una esponja a suave En algunos modelos hay una placa de calentamiento empotrada bajo el fondo del horno. Despus de algunas cocciones, el cristal del fondo del horno se calienta mucho
(para ms detalles, consulte la Gua de Control en lnea). Limpie el cristal despus de que el mensaje Oven too hot (Horno demasiado caliente) haya desaparecido de la pantalla. SONDA (en algunos modelos) Jabn y agua tibia A. Placa de Calentamiento Empotrada La sonda solo puede lavarse a mano. Sujete el extremo de goma, lave suavemente con jabn y agua tibia. Enjuague y seque bien antes de guardar. Colquelo en una caja de almacenamiento suministrada para facilitar el acceso. Mantenga la caja de almacenamiento limpia de alimentos y residuos. Consulte la Gua de Inicio Rpido para obtener ms informacin. affresh es una marca registrada de Whirlpool, U.S.A. 31 A Limpiar la Lente del Sensor IR: (en algunos modelos) El sensor IR est situado en el lado derecho de la parte superior de la cavidad. Lmpielo cuando la pantalla muestre el recordatorio de limpieza o manualmente si es necesario. NOTA: Espere a que el producto se ponga en reposo y se enfre. Para limpiar la lente del sensor IR cuando aparezca el recordatorio:
1. Siga las instrucciones de la pantalla para limpiarlo. 2. Use el limpiador de lentes y un bastoncillo sin pelusa para limpiarlo. 3. Tras la limpieza, se cerrar el protector de IR. 4. pulse el botn CONFIRM/MENU (CONFIRMAR/MEN) para volver a la posicin de reposo. NOTA: Pulse el botn BACK (ATRS) para salir del recordatorio si no limpia el lente en ese momento, el recordatorio volver a aparecer en 7 das. Las dems funciones funcionarn como de costumbre, excepto la funcin de coccin con sensor IR. Para limpiar la lente del sensor IR a diario:
Si el rendimiento de la funcin de coccin del sensor IR no es bueno, puede limpiar la lente IR en cualquier momento. 1. Pulse el botn Settings (Ajustes) y el botn de flecha hasta el submen Clean & Maintenance
(Limpieza y Mantenimiento). 2. Use el botn de flecha para seleccionar IR Cleaning (Limpieza IR). Y pulse la tecla CONFIRM/MENU (CONFIRMAR/MEN) para seleccionar la limpieza de IR. 3. Use el limpiador de lentes y el hisopo sin pelusa para limpiar la lente cuando se abra el protector de IR. 4. Tras la limpieza, se cerrar el protector de IR. 5. Presione el botn CONFIRM/MENU (CONFIRMAR/MEN) para volver a la posicin de reposo. Limpiar/Sustituir el Filtro de Grasa:
El filtro para grasa se encuentra en la cara interior del horno microondas. Limpie mensualmente. Para limpiar el filtro de grasa:
Desconecte el suministro elctrico. Retire el filtro de grasa empujando hacia atrs las reas rebordeadas y tirando hacia abajo de la placa inferior, vase la ilustracin 1. Limpie el filtro para grasa con un limpieza suave y estropajo o con lavavajillas. Despus de limpiar el filtro de grasa, squelo y vuelva a colocarlo en la placa inferior, con los muelles hacia atrs, empujando las reas rebordeadas hacia atrs, hasta que las dos lengetas estn en posicin, vase la ilustracin 2. Para sustituir un filtro de grasa nuevo:
Desconecte el suministro elctrico. Retire el filtro de grasa empujando hacia atrs las reas rebordeadas y tirando hacia abajo de la placa inferior, vase la ilustracin 1. Sustituya un filtro de grasa nuevo colocando el filtro de grasa en la placa inferior, con los muelles hacia atrs, empujando las reas rebordeadas hacia atrs, hasta que las dos lengetas estn en posicin, vase la ilustracin 2. A. Lente del Sensor IR B. Hisopo sin pelusa con Lente Ilustracin 1 A. Placa Inferior B. Filtro de Grasa C. reas Rebordeadas 32 ABABC Cmo sustituir el Filtro de Carbn:
El filtro de carbn est detrs del filtro de grasa. No puede limpiarse y debe reemplazarse cada 6 meses, mientras la pantalla muestra la alerta de filtro Change the Charcoal Filter and reset reminder in Settings (Cambiar el Filtro de Carbn y restablecer recordatorio en Configuracin). Para sustituir el filtro de carbn:
Desconecte el suministro elctrico. Ilustracin 2 Retire el filtro de grasa empujando hacia atrs las reas rebordeadas y despus tire hacia abajo de la placa inferior y djelo a un lado, vase la ilustracin 1 . Extraiga el filtro de carbn de la placa inferior tirando de los cuatro ganchos hacia fuera, vase la ilustracin 3. Reemplace el filtro de carbn antiguo con un filtro de carbn nuevo. Vuelva a colocar el filtro de carbn en la placa inferior, inserte los cuatro ganchos en los orificios de la placa inferior. Vuelva a colocar el filtro de grasa en la placa inferior y los muelles hacia atrs. Empuje las reas rebordeadas hacia atrs, hasta que las dos lengetas estn en posicin, vase la ilustracin 2. A. Lengetas B. rea Rebordea-
da C. Filtro de Grasa D. Muelle Para quitar la alerta del filtro y restablecer su duracin:
Ilustracin 3 Despus de sustituir el filtro de carbn, para eliminar la alerta de filtro en la pantalla, recupere otros 6 meses de duracin. Presione el botn Settings (Ajustes), use el botn de Flecha para seleccionar el submen Cleaning
& Maintenance (Limpieza y Mantenimiento), presione el botn CONFIRM/MENU (CONFIRMAR/MEN) para entrar. Use el botn de Flecha para seleccionar el submen Reset Filter (Restablecer Filtro), presione el botn CONFIRM/MENU (CONFIRMAR/MEN) para restablecer. El filtro de carbn recupera ahora otros 6 meses de duracin. NOTA: Para la ventilacin en el techo y la ventilacin en la pared, el filtro de carbn no es necesario, pero la alerta del filtro seguir apareciendo cada 6 meses. Puede seguir los pasos anteriores para eliminar la alerta. A. Orificios B. Ganchos C. Filtro de Carbn D. Placa Inferior Materiales Necesarios Accesorios estndar para la ventilacin a travs de la pared o del techo. Consulte la seccin Especificaciones para el Diseo de la Ventilacin. INSTRUCCIONES DE INSTALACIN REQUISITOS Herramientas y Piezas Herramientas Necesarias Cinta mtrica Lpiz Tijeras Cinta masking o tachuelas Taladro Destornillador Phillips n. 2 Detector de vigas Destornillador Phillips n. 3 para pernos de 1/4 - 20 x 3"
(76 mm) Brocas de barrena de 3/16" (5 mm), 3/8" (10 mm) y 5/8"
(16 mm) Sierra perforadora de 3/4" (19 mm) Sierra caladora Alicate de corte diagonal para cable Llave de cubo (o llave de punta hexagonal) de 7/16" (11 mm) para tirafondos de 1/4" x 2" (6,4 mm x 51 mm) Broca de barrena para un orificio de 11/2" (38 mm) de dimetro para el gabinete de madera o de metal Pistola para calafateo y compuesto para calafateo impermeable Cinta para ductos. 33 ACBDBACD Piezas Suministradas Pieza Dibujo Descripcin Cant. Dnde puedo encontrar?
Paquete de Tornillos Pernos de cabeza redonda de 3/16-24 x 3"
Pernos de cabeza redonda de 1/4-20 x 3"
Arandelas Tuercas de soporte de 3/16"
Tirafondos de 1/4" x 2"
Tornillo para metal laminado #6 x 3/8"
Forro del cable de suministro de energa Compuerta para ventilacin a travs de la pared o del techo Espaciador
(L*W*T: 40*10*1,6 mm) Compuerta Espaciador 34 A. Forma Interior en la cavidad 2 2 2 2 4 2 1 1 8 B. Dentro de la carpeta de Documentacin AB Plantilla de cartn Plantilla del gabinete superior y plantilla de la Pared Paquete de Documentacin Documentacin Placa de Montaje Placa de montaje 1 1 1 C. Forma Exterior en el Cartn Verifique los cdigos locales. Compruebe el suministro elctrico existente. Consulte Requisitos Elctricos. Es recomendable que todas las conexiones elctricas sean hechas por un instalador elctrico calificado autorizado. NOTA:
La tornillera que se enumera aqu es para vigas de madera. Para otros tipos de estructuras de pared, asegrese de usar las fijaciones adecuadas. Asegrese de comprar nicamente piezas y accesorios Whirlpool certificados de fbrica para su electrodomstico. Su instalacin puede requerir piezas adicionales. Para pedirlo, consulte la seccin Informacin de Pedidos en lnea de la Gua de Inicio Rpido. Dimensiones del producto A. 297/8" (76,1 cm) B. 177/8" (45,4 cm) C. 121/8" (31,3 cm) Requisitos de Ubicacin Verifique la abertura donde se instalar el horno microondas. La ubicacin debe tener:
Dimensiones de instalacin mnimas. Consulte la ilustracin Dimensiones de Instalacin. Al menos una viga para pared de madera de 2" x 4"
(5,1 x 10,2 cm) y un muro de mampostera o yeso/listn con un espesor mnimo de 3/8" (1 cm) dentro de la abertura del gabinete. Soporte para un peso de 150 libras (68 kg), lo cual incluye el horno microondas y los objetos que se coloquen en su interior, as como en el gabinete superior. Un contacto elctrico conectado a tierra dentro del gabinete superior. Consulte la seccin Requisitos Elctricos. NOTA:
Algunos modelos tienen una agarradera. Si va a instalar el horno microondas cerca de la pared lateral derecha, asegrese de dejar un espacio de al menos 3" (7,6 cm) entre la pared y el horno microondas, para que pueda agarrar la manija integrada en el interior de la puerta. Algunos gabinetes y materiales de construccin no estn diseados para resistir el calor que produce el horno microondas durante la coccin. Verifique con el constructor o con el distribuidor de los gabinetes para asegurarse de que los materiales que se usen no cambien de color, se astillen ni sufran otros daos. Requisitos Especiales Solo para la Instalacin con Ventilacin en la Pared:
El recorte deber estar libre de cualquier obstruccin para que el tubo de ventilacin encaje como es debido y la hoja de la compuerta se abra libremente y por completo. Solo para la Instalacin con Ventilacin en el Techo:
Si usa un tubo de transicin de rectangular a redondo, deber haber un espacio de 3" (7,6 cm) por encima del horno microondas, para que la hoja de la compuerta de tiro pueda abrirse libremente y por completo. Consulte la ilustracin Tubo de Transicin Rectangular a Redondo en la seccin Especificaciones para el Diseo de la Ventilacin. 35 CBAC Las medidas exactas pueden variar segn el tipo de estufa/superficie de coccin que haya debajo.
*36" (91,4 cm) es lo que se recomienda para una altura de instalacin de 72" (182,8 cm).
**30" (76,2 cm) es lo tpico para una altura de instalacin de 66" (167,6 cm).
***Mida desde la pared trasera hasta donde debe estar la superficie inferior delantera del horno microondas (Dimensin A). Para los gabinetes de 12" (30,5 cm) a 123/4" (32 cm), el horno microondas sobresaldr del gabinete. Para los gabinetes de 123/4" (32 cm) a 13" (33 cm), el horno microondas queda a ras del gabinete. NOTA: Puede ser necesario utilizar varios espaciadores, entre la placa de montaje y la pared, para conseguir un aspecto ms Enrasado. Consulte la seccin Fije la Placa de Montaje a la Pared para ms detalles. Si los gabinetes tienen una profundidad superior a 13"
(33 cm), y de hasta 16"
(40,6 cm), utilice el kit de montaje sobresaliente, sustituyendo la placa de montaje suministrada con el producto. El kit de montaje sobresaliente
(nm. de pieza W11630300) no se incluye. A.
(Sobresaliente) 13" a 16"
(33 cm a 40,6 cm) de profundidad B. Gabinete C. Soporte de montaje sobresaliente Para pedirlo, consulte la seccin Informacin de Pedidos en lnea de la Gua de Inicio Rpido. Para gabinetes con otras dimensiones, le sugerimos que seleccione otros Productos Whirlpool. Dimensiones de Instalacin NOTA: El contacto de pared de conexin a tierra de 3 terminales debe estar dentro del gabinete superior. Consulte la seccin Requisitos Elctricos. A. Viga de pared de 2" x 4"
(5,1 cm x 10,2 cm) B. Contacto de 3 terminales con conexin a tierra C. Profundidad del gabinete superior (con puerta)***
D. 36" (91,4 cm) recomendado*
30" (76,2 cm) tpico**
E. 30" (76,2 cm) mnimo F. 72 (182,8 cm) recomendado 66" (167,6 cm) mnimo G. Superficie posterior plana de 181/4" (46,3 cm) mnimo
(Enrasado) 123/4" a 13" (32,3 cm a 33 cm) de profundidad A. B. Gabinete C. Menos de 123/4" (32,3 cm) de profundidad D. Placa de montaje 36 BCFGDEADDBACBCAB Requisitos Elctricos INSTALACIN ADVERTENCIA Preparar la combinacin de horno de microondas y campana Peligro de choque elctrico Conecte a un tomacorriente con conexin a tierra de 3 terminales. No quite el terminal de conexin a tierra. No use un adaptador. No utilice un cable de extensin. No seguir estas instrucciones puede ocasionar la muerte, un incendio o un choque elctrico. Respete todas las normativas y reglamentos vigentes. Se necesita:
Un suministro elctrico de 120 V, 60 Hz, CA solamente, de 15 A o 20 A con fusible o disyuntor. Se recomienda:
Un fusible o un disyuntor retardador. Un circuito separado que preste servicio solamente a este horno microondas. INSTRUCCIONES DE CONEXIN A TIERRA Para la conexin de un aparato mediante cable elctrico conectado a tierra:
Este electrodomstico debe estar conectado a tierra. En caso de funcionamiento defectuoso o avera, la conexin a tierra reducir el riesgo de choque elctrico al proporcionar una va de menor resistencia para la corriente elctrica. Este electrodomstico est equipado con un cable que cuenta con un conductor para la conexin a tierra del equipo y un enchufe de conexin a tierra. El enchufe debe conectarse en un tomacorriente apropiado, que est debidamente instalado y conectado a tierra de acuerdo con todos los cdigos y ordenanzas locales. ADVERTENCIA: La conexin incorrecta del conductor de conexin a tierra del equipo puede dar como resultado un choque elctrico. Verifique con un electricista o un tcnico de servicio calificado si no est seguro de que la conexin a tierra del electrodomstico sea la adecuada. No modifique el enchufe provisto con la lavavajillas; si no encaja en el tomacorriente, consulte a un electricista competente para instalar un tomacorriente adecuado. GUARDE ESTAS INSTRUCCIONES Este dispositivo cumple con la Parte 18 de las Reglas de la FCC. ADVERTENCIA Peligro de peso excesivo Use dos o ms personas para mover e instalar o desinstalar el electrodomstico. No seguir esta instruccin puede ocasionar lesiones en la espalda o de otro tipo. 1. Cubra la superficie de trabajo para evitar posibles daos. 2. Retire la plantilla de cartn de la espuma exterior del cartn. Es para el gabinete superior y la instalacin de pared. 3. Quite el paquete de tornillos de la espuma interior de la cavidad. 4. Retire la compuerta de la espuma interior de la cavidad. 5. Retire el paquete de documentacin de la espuma exterior en el cartn. 6. Retire los materiales de envo, cinta y pelcula del microondas. 7. Retire la placa de montaje de la espuma interior de la cavidad. 8. Aplique cinta adhesiva en la puerta del horno de microondas cerrada para que no se abra mientras se manipula el horno de microondas. NOTA: Para evitar daos al horno de microondas, no aferre ni use la puerta ni la manija de la puerta mientras manipula el horno de microondas. 37 Tipos de Instalacin Este horno microondas est diseado para adaptarse a los siguientes tres tipos de ventilacin, elija un tipo antes de instalar. NOTA: Para la ventilacin en el techo y la ventilacin en la pared, el filtro de carbn no es necesario, desinstale el filtro de carbn antes de su uso. Consulte la seccin Instalacin Completa para ms detalles. Recirculacin Ventilacin en la Pared Ventilacin en el Techo
(Ajuste Predeterminado de Fbrica) Encontrar plantilla de cartn La plantilla de cartn se usa como plantilla de pared y del gabinete superior. Se encuentra en la espuma exterior del cartn. Encuntrela antes de la instalacin. Encontrar las vigas de pared NOTA: Si no hay vigas de pared dentro de la abertura del gabinete, no instale el horno de microondas. Vea las ilustraciones en Posibles configuraciones de las vigas de pared. 1. Ubique los bordes de las vigas de pared dentro de la abertura con un detector de vigas. 2. Marque el centro de cada viga y trace una lnea a plomo hacia abajo desde el centro de cada viga. Vea las ilustraciones en Posibles configuraciones de las vigas de pared. 38 Posibles configuraciones de las vigas de pared Estas representaciones muestran ejemplos de las configuraciones de instalacin preferidas con la placa de montaje. Sin vigas de pared en los orificios de extremo Sin vigas de pared en los orificios de extremo Figura 1 Figura 2 A. Orificios de extremo (en la placa de montaje) B. Lnea central vertical de la abertura del gabinete C. Lneas centrales de los pies derechos de pared D. Orificios para los tirafondos E. Lengetas de soporte F. Marcadores centrales de la placa de montaje NOTA: si las vigas de pared estn a no ms de 6" (15,2 cm) de la lnea central vertical, solamente se podr hacer una instalacin con recirculacin o una instalacin con ventilacin en el techo. A. Orificios de extremo (en la placa de montaje) B. Lnea central vertical de la abertura del gabinete C. Lneas centrales de los pies derechos de pared D. Orificios para los tirafondos E. Lengetas de soporte F. Marcadores centrales de la placa de montaje Viga de pared en orificios de extremo Viga de pared en orificios de extremo Figura 3 Figura 4 A. Orificios de extremo (en la placa de montaje) B. Lnea central vertical de la abertura del gabinete C. Lneas centrales de los pies derechos de pared D. Orificios para los tirafondos E. Lengetas de soporte F. Marcadores centrales de la placa de montaje A. Orificios de extremo (en la placa de montaje) B. Lnea central vertical de la abertura del gabinete C. Lneas centrales de los pies derechos de pared D. Orificios para los tirafondos E. Lengetas de soporte F. Marcadores centrales de la placa de montaje 39 AABCCDEEFAABCDEEFDA,DBCCEEFAA,DBEA,DCECF Encontrar el Punto al Ras Este producto est diseado para quedar enrasado con el gabinete, y el punto de enrasado debe encontrarse antes de la instalacin. No lo instale con la parte frontal del horno microondas situada detrs de la parte frontal del gabinete/puerta . Al ras de la puerta del Gabinete Al ras de la puerta del Gabinete No lo instale con la parte frontal del horno microondas situada detrs de la parte frontal del gabinete/puerta . No lo instale con la parte frontal del horno microondas situada detrs de la parte frontal del gabinete/puerta . A. Puerta del gabinete B. Gabinete C. Puerta del horno microondas A. Puerta del gabinete B. Gabinete C. Puerta del horno microondas A. Puerta del gabinete B. Gabinete C. Puerta del horno microondas A. Puerta del gabinete B. Gabinete C. Puerta del horno microondas NOTA: El deflector de la parrilla se abrir automticamente 30 grados cuando el horno microondas use la funcin de ventilacin y coccin. No instale el horno microondas con el deflector de la parrilla detrs de la parte frontal del gabinete/puerta, de lo contrario bloquear la salida de aire. A. Gabinete B. Deflector A. Gabinete B. Deflector 40 ABCABCACBACB30oCabinetABBAABB Marcar Gabinete Superior 1. Con una cinta, mida claramente y marque la lnea central vertical de la abertura. Asegrese de que est alineada con la lnea central de la pared vertical. Al ras de la puerta del gabinete A. Lnea central del Gabinete Superior B. Lnea central de la Pared NOTA: La plantilla de cartn es apta para profundidades de 12" a 13", (30,5 cm a 33,02 cm) en la instalacin del gabinete, pero necesita algn ajuste para profundidades diferentes. Vea los pasos 2 y 3 siguientes. Si los gabinetes tienen una profundidad superior a 13"
(33 cm), y de hasta 16" (40,6 cm), utilice el kit de montaje sobresaliente, sustituyendo la placa de montaje suministrada con el producto. El kit de montaje sobresaliente
(nm. de pieza W11630300) no se incluye. Si su gabinete tiene una profundidad de 12" a 123/4"
(30,5 cm a 32,4 cm), realice el paso 2:
2. Coloque la plantilla de cartn contra la base del gabinete superior. NOTAS:
Asegrese de que el borde posterior de la plantilla de cartn se alinee con el borde posterior del gabinete superior. Asegrese de que las marcas centrales en la plantilla de cartn se alineen con la lnea central del gabinete superior que se dibuj en el paso 1. Asegrese de que la flecha en la plantilla de cartn vea hacia afuera. A. Menos de 12" (30,5 cm) de profundidad B. Gabinete A. Borde Posterior de la Plantilla de Cartn y Borde Posterior del Gabinete Superior B. Lnea central y Marcas Centrales del Gabinete Superior en la Plantilla A. Borde Delantero de la Plantilla de Cartn y Puerta del Gabinete Superior B. Gabinete Superior y Lnea de 0,75" (1,9 cm) de la Plantilla de Cartn C. Placa de montaje D. Puerta del horno microondas E. Gabinete Si la profundidad de su gabinete es de 123/4" a 13"
(32,4 cm a 33 cm):
3. Coloque la plantilla de cartn contra la base del gabinete superior. NOTAS:
Asegrese de que el borde delantero de la plantilla de cartn se alinee con el borde delantero del gabinete superior. Asegrese de que las marcas centrales en la plantilla de cartn se alineen con la lnea central del gabinete superior que se dibuj en el paso 1. A.
(Enrasado) 123/4" a 13"
(32,4 cm a 33 cm) de profundidad B. Gabinete A. Borde Delantero de la Plantilla de Cartn y Borde Delantero del Gabinete Superior B. Lnea central del Gabinete Superior C. Flechas en la Plantilla de Cartn D. Marcas Centrales en la Plantilla de Cartn NOTA: Si las puertas del gabinete superior sobresalen del gabinete superior, el cartn puede ajustarse hacia afuera para que quede al ras con la puerta del gabinete superior. Por ejemplo, la puerta del gabinete superior tiene un grosor de 0,75" (1,9 cm), puede alinear la plantilla de cartn con una lnea de 0,75" (1,9 cm) con el gabinete superior. 41 ABBABAABACDEABBACD 4. Utilice un lapicero para marcar un orificio para el cable elctrico y dos orificios para la tuerca de montaje. Con un lapicero para marcar el orificio del ducto de escape
(solamente para la instalacin con ventilacin por la pared), omita este paso si su unidad es para recirculacin o instalacin con ventilacin en la pared. A. Orificio para el Cable Elctrico B. Orificios para la Tuerca de Montaje 5. Utilice un lapicero para marcar el orificio de ventilacin del gabinete superior. Puede omitir este paso si su unidad utiliza recirculacin o una instalacin de ventilacin a travs de la pared. A. Borde Posterior del Gabinete Superior B. Orificio del Ducto de Escape C. Plantilla de Cartn NOTA:
Si el borde frontal del gabinete superior est ms bajo que el borde posterior, baje la plantilla de cartn para que la parte superior quede nivelada con el borde frontal del gabinete. A. Orificio del Gabinete Superior Marque la Pared Posterior El horno microondas deber instalarse como mnimo sobre una viga de pared, preferentemente dos, usando como mnimo un tirafondo, preferentemente dos. Consulte la seccin Encontrar las Vigas de Pared para ver dnde se encuentran. 1. Utilice un lapicero para marcar un orificio para el cable elctrico y dos orificios para la tuerca de montaje. A. Pared posterior B. Plantilla de cartn C. La parte superior de la plantilla de cartn debe alinearse con el borde frontal del gabinete D. Borde frontal del gabinete superior 3. Sujete la plantilla de cartn en la pared trasera mientras alinea las marcas centrales laterales (B) de la plantilla de cartn con la lnea central vertical trazada en el paso 1. Asegrese de que la plantilla de cartn est nivelada y que la parte superior tope contra el borde inferior del gabinete superior. A. Lnea central 2. Alinee las marcas centrales de la plantilla de cartn con la lnea central en la pared; asegrese de que est nivelada y que la parte superior de la plantilla de cartn est a tope contra el borde posterior del gabinete superior. (Consulte la NOTA siguiente antes de realizar las marcas.) A. Borde Inferior del Gabinete Superior y Parte Superior de la Plantilla de Cartn B. Marcas Centrales en la Plantilla de Cartn C. Lnea central 42 ABAAA BCACBDBAC 4. Localice y marque las dos lneas de posicin inferiores (A) en la plantilla de cartn. Taladrar los orificios en el Gabinete Superior 1. Con un taladro y la sierra caladora de 3/4" (1,9 cm), recorte el orificio del cable de alimentacin (A). 2. Perfore dos orificios para las tuercas de montaje (B), que son orificios de 3/8" (10 mm) en los puntos D y E de la plantilla de cartn. Son para dos pernos de 1/4-20 x 3" y las arandelas que se usan para asegurar el horno microondas al gabinete superior. A. Lnea de Posicin Inferior de Plantilla de Cartn 5. Utilizando el borde inferior de la plantilla de cartn, alinelo con las dos lneas pequeas (A), y trace una lnea (B) indicando dnde debe estar el borde inferior de la placa de montaje (C). A. Orificio para el Cable Elctrico B. Orificios para la Tuerca de Montaje NOTA: Si el gabinete superior es de metal, el buje del cable de suministro se debe instalar alrededor del orificio del cable de suministro, como se muestra. A. Dos Lneas Pequeas B. Lnea de Inferior de Plantilla de Cartn C. Borde Inferior de la Placa de Montaje 6. Dibuje cuatro crculos pequeos utilizando los orificios A, B, H y J. A. Gabinete de metal B. Forro del cable de suministro de energa 3. Corte el rea de corte de ventilacin del techo rectangular con una sierra caladora. Omita este paso si se trata de una instalacin de ventilacin de recirculacin o ventilacin a travs del techo. A. rea de Recorte de la Ventilacin a travs del Techo 43 AABCA & B & H & J holesABABA Taladre orificios en la Pared Posterior 1. La placa de montaje se encuentra dentro de la espuma interior en la cavidad, squela. A. Placa de Montaje B. Espuma Exterior en el Cartn 2. Fije la placa de montaje a la pared. Asegrese de que los cuatro orificios de la placa de montaje estn alineados con los orificios A, B, H y J marcados en la seccin Marque la pared Posterior.y que las marcas centrales de la placa de montaje estn alineadas con la Marca Central. NOTA: Puede ser necesario utilizar varios espaciadores, entre la placa de montaje y la pared, para conseguir un aspecto ms Enrasado. Consulte la seccin Fije la Placa de Montaje a la Pared para ms detalles. Mida desde la pared trasera hasta donde se encuentra la superficie inferior delantera del horno microondas para determinar el nmero de espaciadores necesarios. A. Placa de Montaje B. Orificios A y B y H y J C. Lnea Posterior de la Placa de Montaje D. Marca Central E. Marcadores centrales de la placa de montaje 3. Taladre los orificios en A, B, H y J, si las vigas de la Pared no se encuentran en los orificios A y B, no taladre los orificios A y B, y siga las instrucciones siguientes. Adems de instalar la placa de montaje en al menos una viga de pared, se le debe sujetar a la pared en ambos orificios de extremo. Si los orificios de extremo no estn sobre vigas de pared, use dos pernos de cabeza redonda de 3/16-24 x 3"
con tuercas de palanca; si 1 orificio de extremo est sobre una viga de pared, use un tirafondo y un perno de cabeza redonda de 3/16-24 x 3" con una tuerca de palanca; o si ambos orificios de extremo se encuentran sobre vigas de pared, use dos tirafondos. A continuacin se incluyen tres configuraciones de instalacin. Instalacin sin Vigas de Pared en los Orificios de Extremo
(Figuras 1 y 2 en la seccin Ubique las Vigas de Pared) 1. Taladre orificios de 5/8" (1,6 cm) a travs de la pared en los dos orificios de extremo que se marcaron en el Paso 3 de Marque la Pared Posterior. 2. Taladre orificios de 3/16" (5 mm) en las vigas de pared en los orificios que se marcaron en el paso 6 de Marque la Pared Posterior. Consulte las figuras 1 y 2 en Posibles Configuraciones de las Vigas de Pared de la seccin Ubique las Vigas de Pared. Instalacin para Viga de Pared en un Orificio de Extremo
(Figura 3 en la seccin Ubique las Vigas de Pared) 1. Taladre un orificio de 3/16" (5 mm) a travs de la viga de pared en el orificio de extremo que se marc en el Paso 3 de la seccin Marque la Pared Posterior. 2. Si instala una segunda viga de pared, taladre un orificio de 3/16" (5 mm) a travs de la viga de pared en el otro orificio marcado en el Paso 6 de Marque la Pared Posterior. Consulte la Figura 3 en Posibles Configuraciones de las Vigas de Pared de la seccin Ubique las Vigas de Pared. 3. Taladre un orificio de 5/8" (1,6 cm) a travs de la pared en el otro extremo. Instalacin para Vigas de Pared en ambos Orificios de Extremo
(Figura 4 en la seccin Ubique las Vigas de Pared) 1. Taladre orificios de 3/16" (5 mm) travs de las vigas de pared en los orificios de extremo marcados en el Paso 3 de la seccin Marque la Pared Posterior. 4. Corte el rea de corte de ventilacin de la pared rectangular con una sierra caladora. Omita este paso si se trata de una instalacin de ventilacin de recirculacin o ventilacin a travs del techo. A. rea de Recorte de la Ventilacin a travs de la Pared 44 BAA BCDEA Fije la Placa de Montaje a la Pared 1. Coloque la placa de montaje en la pared. NOTA: Puede ser necesario utilizar varios espaciadores, entre la placa de montaje y la pared, para conseguir un aspecto ms Enrasado. Pegue los espaciadores antes de colocar la placa de montaje en la pared. Mida desde la pared trasera hasta donde debe estar la superficie inferior delantera del horno microondas para determinar el nmero de espaciadores necesarios. Sin Vigas de Pared en los Orificios de Extremo
(Figuras 1 y 2 en la seccin Ubique las Vigas de Pared) NOTA: La placa de montaje se debe asegurar a la pared en al menos una viga de pared y tambin en ambos extremos. 1. Con las lengetas de soporte de la placa de montaje mirando hacia adelante, inserte pernos de cabeza redonda de 3/16-24 x 3" a travs de ambos orificios de extremo de la placa de montaje. 2. Coloque tuercas de palanca en los pernos de la parte posterior de la placa de montaje. Deje suficiente espacio para que la tuerca de ajuste con resorte puedan atravesar la pared y abrirse. A. Placa de Montaje B. 1/16" (1,6 mm) de grosor Profundidad del gabinete 12" a 13"
(30,5 cm a 33 cm) 131/16" (33,2 cm) 131/8" (33,3 cm) Placa de montaje Placa de montaje Placa de montaje + espaciador de 4 piezas Placa de montaje + espaciador de 8 piezas 2. Asegure la placa de montaje a la pared en ambos orificios de extremo perforados en las vigas de pared y/o en la mampostera con pernos de cabeza redonda de 3/16-24 x 3"
y tuercas de palanca o con tirafondos de 1/4 x 2". Consulte las ilustraciones de Posibles Configuraciones de las Vigas de Pared en la seccin Ubique las Vigas de Pared, y las siguientes secciones: Sin Vigas de Pared en los Orificios de Extremo (Figuras 1 y 2 en la seccin Ubique las Vigas de Pared) o Viga de Pared en un Orificio de Extremo (Figura 3 en la seccin Ubique las Vigas de Pared). Inserte los tirafondos en ambos orificios de extremo. 3. 4. Controle la alineacin de la placa de montaje y asegrese de que est nivelada. 5. Fije los dos tornillos del orificio del extremo. 6. Fije la placa de montaje a la pared en los orificios H y J con dos tirafondos de 1/4 x 2". A. Perno de cabeza redonda de 3/16-24 x 3"
B. Placa de montaje C. Tuerca de ajuste con resorte 3. Coloque la placa de montaje en la pared. 4. Empuje los 2 pernos con las tuercas de ajuste con resorte a travs de la mampostera y apriete manualmente los pernos para asegurarse que las tuercas se hayan abierto contra la mampostera. A. Perno de cabeza redonda de 3/16-24 x 3"
B. Placa de montaje C. Tuerca de ajuste con resorte D. Mampostera 5. Inserte los tirafondos en los orificios taladrados en las vigas de pared en el Paso 2 de Instalacin sin Vigas de Pared en los Orificios de Extremo en la seccin Taladre Orificios en la Pared Posterior. 6. Controle la alineacin de la placa de montaje y asegrese de que est nivelada. 7. Apriete bien todos los tirafondos y pernos. A. Placa de Montaje B. Orificios H y J 45 BAABABCABCD Viga de Pared en un Orificio de Extremo (Figura 3 en la seccin Ubique las Vigas de Pared) 1. Con las lengetas de soporte de la placa de montaje mirando hacia adelante, inserte un perno de cabeza redonda de 3/16-24 x 3" a travs del orificio de extremo que encaje en el orificio de 5/8" (16 mm) taladrado en el paso 3 de Instalacin para una Viga de Pared en un Orificio de Extremo en la seccin Taladre Orificios en la Pared Posterior. 2. Coloque una tuerca de palanca en el perno de la parte posterior de la placa de montaje. Deje suficiente espacio para que la tuerca de ajuste con resorte puedan atravesar la pared y abrirse. 3. Coloque la placa de montaje en la pared. 4. Empuje el perno con la tuerca de ajuste con resorte a travs de la mampostera y apriete manualmente el perno para asegurarse de que se haya abierto contra la mampostera. 5. Inserte un tirafondo en el orificio de extremo restante. 6. Si se hace la instalacin en una segunda viga de pared, inserte un tirafondo en el otro orificio taladrado en el Paso 2 de Instalacin para una Viga de Pared en un Orificio de Extremo en la seccin Taladre Orificios en la Pared Posterior. 7. Controle la alineacin de la placa de montaje y asegrese de que est nivelada. 8. Ajuste con firmeza los tirafondos y el perno. Gire el Motor del Soplador Esta seccin incluye instalacin de ventilacin a travs de la pared y del techo, ambas instalaciones de ventilacin necesitan girar el motor del soplador, seleccione un tipo de ventilacin antes de instalar el horno microondas. Y siga las instrucciones adecuadas para girar el motor del soplador. Si para la instalacin de la recirculacin, no es necesario girar el motor del soplador, puede saltar esta seccin. Cmo girar el Motor del Soplador para la Instalacin de Ventilacin a travs de la Pared 1. Retire los tornillos que sujetan la placa de la compuerta a la parte posterior del horno microondas y deje los tornillos a un lado. 3. Quite los dos tornillos del soplador que sostienen el motor del soplador al horno microondas y djelos a un lado. A. Tornillos del soplador 4. Desconecte el cable del motor del soplador desde el conector. A. Cable del motor del soplador B. Conector 5. Levante y saque el motor del soplador del horno microondas y djelo a un lado. A. Placa de la compuerta B. Tornillo 2. Gire y ajuste la placa de la compuerta de manera vertical como se muestra. A. Motor del soplador A. Placa de la compuerta 46 ABAAABA 6. Con un alicate de corte diagonal para cable, recorte con 10. Vuelva a colocar los dos tornillos del soplador en los orificios cuidado las cubiertas de las ventilaciones rectangulares de la compuerta en las perforaciones. embutidos en la parte posterior del horno microondas. A. Alicate de corte diagonal para cable B. Cubierta de ventilacin rectangular 7. Sostenga el cable del motor del soplador y pselo a travs del puente del motor del soplador. A. Puente del motor del soplador B. Cable del motor del soplador 8. Baje el motor del soplador nuevamente dentro del horno microondas. Los orificios de escape deben mirar hacia la parte posterior del horno microondas. A. Tornillos B. Orificios 11. Controle que los dos tornillos estn asegurados de manera correcta en los orificios para tornillos del motor del soplador, de manera que el motor no pueda moverse. A. Orificio de Escape 9. Vuelva a conectar el cable del motor del soplador al conector. A. Tornillos B. Orificios para tornillos del motor del soplador 12. Vuelva a colocar la placa de la compuerta en su posicin horizontal original. A. Cable del motor del soplador B. Conector A. Placa de la compuerta 47 BAABAABABBABBA 13. Asegure la placa de la compuerta con los dos tornillos que retir en el Paso 1. 3. Baje el motor del soplador nuevamente dentro del horno microondas. Los orificios de escape deben mirar hacia la superior del horno microondas. A. Placa de la compuerta B. Tornillo ADVERTENCIA Peligro de choque elctrico Conecte a un tomacorriente con conexin a tierra de 3 terminales. No quite el terminal de conexin a tierra. No use un adaptador. No utilice un cable de extensin. No seguir estas instrucciones puede ocasionar la muerte, un incendio o un choque elctrico. 14. Enchufe el horno microondas. Compruebe si el ventilador produce sonidos anormales, repase los pasos para averiguar cul omiti. Cmo girar el Motor del Soplador para la Instalacin de Ventilacin a travs del Techo 1. Repita los Pasos 1 a 5 de Solamente para la Instalacin con Ventilacin en la Pared. 2. Con un alicate de corte diagonal para cable, recorte con cuidado las cubiertas de las ventilaciones rectangulares de la placa de la compuerta en las perforaciones. A. Orificio de escape IMPORTANTE: Si el motor del soplador no se coloca con el lado plano mirando hacia la parte posterior del horno microondas (como se muestra), el rendimiento ser deficiente. 4. Vuelva a conectar el cable del motor del soplador al conector. 5. Vuelva a colocar los dos tornillos del soplador en los orificios embutidos en la parte posterior del horno microondas. 6. Controle que los dos tornillos estn asegurados de manera correcta en los orificios para tornillos del motor del soplador, de manera que el motor no pueda moverse. 7. Vuelva a colocar la placa de la compuerta en su posicin horizontal original. A. Placa de la compuerta 8. Asegure la placa de la compuerta con el tornillo que retir en el Paso 1. A. Cubiertas de ventilaciones rectangulares B. Alicate de corte diagonal para cable 9. Repita el Paso 14 de Solamente para la Instalacin con Ventilacin en la Pared. A. Placa de la compuerta B. Tornillo 48 ABBAAAAB 3. Conecte el ducto de escape al conjunto de la compuerta. Instale el Conjunto de la Compuerta Si para la instalacin de la recirculacin, no es necesario instalar el conjunto de la compuerta, puede saltar esta seccin. Y gurdela para utilizarla en el futuro. Instalacin del Conjunto de la Compuerta para Ventilacin por la Pared 1. Verifique que la hoja de la compuerta se mueva libremente y se abra por completo. 2. Ubique el conjunto de la compuerta sobre la parte posterior del horno microondas de modo que la bisagra de la hoja de la compuerta quede en la parte superior y la hoja se abra alejndose del horno microondas. A. Ducto de escape B. Conjunto de la compuerta (debajo del ducto de escape) Instalacin del horno de microondas ADVERTENCIA Peligro de peso excesivo Use dos o ms personas para mover e instalar o desinstalar el electrodomstico. No seguir esta instruccin puede ocasionar lesiones en la espalda o de otro tipo. IMPORTANTE: El lado de los controles del horno de microondas es el lado pesado. Manipule el horno de microondas con delicadeza. 1. Coloque una arandela en cada perno de cabeza plana de 1/420 x 3" y colquelos dentro del gabinete superior cerca de los orificios de 3/8" (10 mm). 2. Asegrese de que la puerta del horno de microondas est cerrada y fijada con cinta adhesiva. A. Parte posterior del horno microondas B. Conjunto de la compuerta C. Hoja de la compuerta D. Tornillo para metal laminado #6 x 3/8"
3. Asegure el conjunto de la compuerta de tiro con dos tornillos para metal laminado n. 6 x 3/8". Instalacin del Conjunto de la Compuerta para Ventilacin por el Techo 1. Verifique que la hoja de la compuerta se mueva libremente y 2. se abra por completo. Inserte el conjunto de la compuerta a travs del recorte del gabinete de manera que la lengeta larga del conjunto de la compuerta se deslice debajo de las lengetas con relieve de la placa de la compuerta. Luego, asegrelo con tornillos para metal laminado #6 x 3/8". NOTA: El tornillo no podr instalarse si no se coloca el conjunto de la compuerta como se muestra A. Lengetas con relieve B. Conjunto de la compuerta C. Tornillo para metal laminado #6 x 3/8"
D. Recorte del gabinete superior E. Lengeta larga F. Placa de la compuerta 3. Con la ayuda de dos o ms personas, levante el horno de microondas y culguelo de las lengetas de soporte en la parte inferior de la placa de montaje. NOTA: Para evitar daos al horno de microondas, no aferre ni use la puerta mientras manipula el horno de microondas. A. Placa de montaje B. Lengetas de soporte 49 AB CDABCDEFABAB 4. Con el frente del horno de microondas todava inclinado, pase el cable de suministro elctrico a travs del orificio del cable de suministro elctrico en el fondo del gabinete superior. Evite daar la tuerca de montaje, apriete los pernos en los orificios de la tuerca de montaje aproximadamente 1520 mm a mano en primera instancia, y asegrese de que los pernos se enrosquen adecuadamente. Luego, apritelos con herramientas. 5. Gire el horno de microondas para arriba hacia el gabinete superior. NOTA: Si la ventilacin ser a travs de la pared, asegrese de que el ensamblaje de la compuerta de tiro encaje con facilidad dentro de la ventilacin del recorte de la pared. 6. Empuje el horno de microondas contra la placa de montaje y sostngalo NOTA: Si no se necesita ajustar el horno de microondas, omita los pasos 6 a 8. 7. Si es necesario ajustarlo, grelo hacia abajo. Con la ayuda de dos o ms personas, levante el horno de microondas fuera de la placa de montaje y djelo a un costado sobre una superficie protegida. 8. Afloje los tornillos de la placa de montaje. Apriete la placa de montaje y vuelva a ajustar los tornillos. 9. Repita los pasos 3 a 6. 10. Con el horno de microondas centrado y al menos una persona sostenindolo en su lugar, inserte los pernos a travs del gabinete superior y dentro del horno de microondas. Apriete los pernos hasta que no haya ningn espacio entre el gabinete superior y el horno de microondas. NOTAS:
Algunos gabinetes superiores pueden necesitar pernos ms largos o ms cortos que 3" (7,6 cm). Hay disponibles pernos ms largos o ms cortos en la mayora de las ferreteras. El apriete excesivo de los pernos puede deformar la parte superior del horno de microondas. Para evitar deformaciones, pueden agregarse bloques de madera de filtro (deben ser provistos por el instalador). Los bloques deben tener el mismo espesor que el espacio entre la base del gabinete superior y el horno de microondas. A. Pernos 50 A. Perno B. Tuerca de montaje Complete la Instalacin 1. Verifique que todas las piezas estn ahora instaladas. Si hay alguna pieza extra, vuelva a revisar todos los pasos para ver cul se omiti. 2. Deseche o recicle todo el material de embalaje. ADVERTENCIA Peligro de choque elctrico Conecte a un tomacorriente con conexin a tierra de 3 terminales. No quite el terminal de conexin a tierra. No use un adaptador. No utilice un cable de extensin. No seguir estas instrucciones puede ocasionar la muerte, un incendio o un choque elctrico. 3. Enchufe el horno microondas a un tomacorriente de pared de tres terminales con conexin a tierra. 4. Reconecte el suministro elctrico. 5. Para verificar el funcionamiento del horno microondas, coloque una taza (250 ml) de agua en la cavidad y programe un tiempo de coccin de un minuto al 100 % de potencia. Para probar el ventilador y el escape, haga funcionar el ventilador. 6. Compruebe que la puerta de ventilacin si se abre automticamente. 7. Si el horno microondas no funciona:
Verifique que no se haya fundido un fusible o disparado un disyuntor de la casa. Reemplace el fusible o reposicione el disyuntor. Si el problema contina, llame a un electricista. Verifique que el cable del suministro elctrico est enchufado en un contacto de pared de tres terminales con conexin a tierra. Para obtener informacin sobre solucin de problemas, vea las Instrucciones del Usuario. A15-20 mmAB 8. Si es para ventilacin en el techo y ventilacin en la pared, desinstale el filtro de carbn antes de utilizarlo, siguiendo los pasos que se indican a continuacin. Para desinstalar el filtro de carbn:
a. Desconecte el suministro elctrico. b. Empuje las reas rebordeadas hacia atrs y, a continuacin, tire hacia abajo del filtro de grasa de la placa inferior. Aparte el filtro de grasa. Consulte la ilustracin 1 para ms detalles. c. Tire de los cuatro ganchos hacia fuera para retirar el filtro de carbn de la placa inferior. Consulte la ilustracin 2 para ms detalles. d. Vuelva a colocar el filtro de grasa en la placa inferior y los muelles hacia atrs. Empuje las reas rebordeadas hacia atrs, hasta que las dos lengetas estn en posicin, vase la ilustracin 1. Ilustracin 1 Ilustracin 2 A. Lengetas B. rea Rebordeada C. Filtro de Grasa D. Muelle A. Orificios B. Ganchos C. Filtro de Carbn D. Placa Inferior Se ha completado la instalacin. Conserve las Instrucciones de instalacin para uso futuro. A. Gabinete B. Horno microondas C. Pared o parte posterior del gabinete D. 1/2"-3/4" (1,3-1,9 cm) ESPECIFICACIONES PARA EL DISEO DE LA VENTILACIN Especificaciones para el Diseo de la Ventilacin Esta seccin est destinada solamente para referencia del diseador arquitectnico y el constructor/contratista. NOTAS:
Los materiales de ventilacin necesarios para la instalacin no se proveen con la combinacin de microondas y campana. No recomendamos usar una ventilacin de metal flexible. Para evitar posibles daos al producto, asegrese de ventilar el aire hacia el exterior, a menos que se trate de una instalacin con recirculacin. No ventile el aire de escape en espacios ocultos, como espacios dentro de paredes o techos, desvanes, espacios angostos o garajes. Para una instalacin con ventilacin ptima, recomendamos:
Usar cubiertas de techo o de pared que tengan compuertas de contracorriente. Usar un ducto de ventilacin de metal rgido. Usar la ruta ms directa mediante la reduccin al mnimo del largo del ducto de ventilacin y el nmero de codos para proveer un rendimiento eficiente. Usar ductos de ventilacin de tamao uniforme. Usar cinta para ductos para sellar todas las juntas del sistema de ventilacin. Usar un compuesto de calafateo para sellar la abertura exterior de la pared o el techo alrededor de la cubierta. Para un rendimiento ptimo de la campana, no instalar dos codos juntos. Si va a tener la ventilacin a travs de la pared, cercirese de que haya el espacio adecuado dentro de la pared para poder abrir completamente la compuerta. A. La altura desde el punto ms alto de la cocina hasta la parte inferior del horno microondas. Mnimo Recomendacin 121/8" (30,8 cm) 181/8" (46 cm) 51 ACBDBACDAABCD Si la ventilacin se har a travs del techo y va a usar un tubo de transicin rectangular a redondo, cercirese de que haya un espacio de al menos 3" (7,6 cm) entre la parte superior del horno microondas y el tubo de transicin. Consulte la ilustracin Transicin Rectangular a Redondo. Accesorios Estndar Recomendados Los siguientes largos equivalentes son para usar cuando se calcule el largo del ducto de ventilacin. Consulte los ejemplos en Largo Recomendado del Ducto de Ventilacin. A. Ventilacin en el techo B. Cubierta para el techo C. Ventilacin en la pared D. Cubierta para la pared Transicin de Rectangular a Redondo NOTA: Debe haber un espacio mnimo de 3" (7,6 cm) entre la parte superior del horno microondas y el tubo de ajuste rectangular a redondo para poder abrir la compuerta libre y completamente. A. Pieza de transicin de rectangular a redondo: 31/4" x 10" a 6" = 5 pies
(8,3 x 25,4 cm a 15,2 cm = 1,5 m) B. Cubierta para el techo: 31/4" x 10" = 24 pies (8,3 x 25,4 cm = 7,3 m) C. Codo de 90: 31/4" x 10" = 25 pies (8,3 x 25,4 cm = 7,6 m) D. Codo de 90: 6" = 10 pies (15,2 cm = 3 m) E. Cubierta para la pared: 31/4" x 10" = 40 pies (8,3 x 25,4 cm = 12,2 m) F. Codo de 45: 6" = 5 pies (15,2 cm = 1,5 m) G. Codo plano de 90: 31/4" x 10" = 10 pies (8,3 x 25,4 cm = 3 m) Largo Recomendado del Ducto de Ventilacin Deber usarse un ducto de ventilacin rectangular de 31/4" x 10"
(8,3 x 25,4 cm) o uno redondo de 6" (15,2 cm). El largo total del sistema de ventilacin, incluido el ducto de ventilacin recto, los codos, los tubos de transicin y las cubiertas de la pared o del techo, no deber exceder el equivalente a 140 pies (42,7 m) para cualquier tipo de ventilacin. Vea la seccin Accesorios Estndar Recomendados para los largos equivalentes. Para un rendimiento ptimo, no use ms de tres codos de 90. Para calcular el largo del sistema que va a necesitar, agregue el largo equivalente de cada pieza de ventilacin que se usar en el sistema. Vea los ejemplos siguientes:
Sistema de ventilacin de 31/4" x 10" (8,3 x 25,4 cm) = 73 pies
(22,2 m) en total A. Cubierta para el techo B. Ducto de escape redondo con dimetro mnimo de 6" (152 mm) C. Codo (solo para la ventilacin a travs de la pared) D. Cubierta para la pared E. Pieza de transicin de transicin rectangular a redondo de 31/4" x 10" a 6" (8,3 x 25,4 cm a 15,2 cm) F. Pieza para la extensin del ducto de ventilacin, al menos 3" (7,6 cm) de altura G. 3" (7,6 cm) A. Un codo de 90 de 31/4" x 10" (8,3 x 25,4 cm) = 25 pies (7,6 m) B. 1 cubierta para la pared = 40 pies (12,2 m) C. 2 pies (0,6 m) + 6 pies (1,8 m) recto = 8 pies (2,4 m) D. 6 pies (1,8 m) E. 2 pies (0,6 m) 52 ABCDABCEFGDABCDEFGA BCDE Sistema de ventilacin de 6" (152 mm) = 73 pies (22,2 m) en total A B E F Si el ducto de ventilacin existente es redondo, deber usarse un tubo de transicin rectangular a redondo. Tambin deber instalarse un ducto de escape de extensin rectangular de 3"
(7,6 cm) entre el conjunto de la compuerta de tiro y un tubo de ajuste rectangular a redondo para evitar que la compuerta de tiro se adhiera. D C A. Dos codos de 90 = 20 pies (6,1 m) B. 1 cubierta para la pared = 40 pies (12,2 m) C. 1 tubo de transicin rectangular a redondo = 5 pies (1,5 m) D. 2 pies (0,6 m) + 6 pies (1,8 m) recto = 8 pies (2,4 m) E. 6 pies (1,8 m) 2 pies (0,6 m) F. W11646004A 2023 All rights reserved. Todos los derechos reservados. 08/23
1 | Agent Authorization | Cover Letter(s) | 20.47 KiB | December 15 2023 |
Whirlpool Microwave Products Development Limited. Address: 17th Fl, Elite Centre,22 Hung To Rd,Kwun Tong, Hong Kong Tel: 8675583811688 Email: Bobo_Lin@Whirlpool.com FCC Authorization Date:
2023-10-31 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:
We, Whirlpool Microwave Products Development Limited., the undersigned, hereby authorizes China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature:
Bobo Lin Approbation Manager QA-FR-170-B
1 | Attestation Statements 1 | Attestation Statements | 153.66 KiB | December 15 2023 |
Whirlpool Microwave Products Development Limited. Address: 17th Fl, Elite Centre,22 Hung To Rd,Kwun Tong, Hong Kong Tel: 8675583811688 Email: Bobo_Lin@Whirlpool.com Attestation Letter Date: 2023-10-31 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 2.911(d)(5)(ii) Filing FCC ID: PR4FLUSHP2WP Whirlpool Microwave Products Development Limited. certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Signature:
Bobo Lin Approbation Manager CFR 47 2.911 (d)(5)(ii) Attestation Letter
1 | Attestation Statements 2 | Attestation Statements | 154.05 KiB | December 15 2023 |
Whirlpool Microwave Products Development Limited. Address: 17th Fl, Elite Centre,22 Hung To Rd,Kwun Tong, Hong Kong Tel: 8675583811688 Email: Bobo_Lin@Whirlpool.com Attestation Letter Date: 2023-10-31 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 2.911(d)(5)(i) Filing FCC ID: PR4FLUSHP2WP Whirlpool Microwave Products Development Limited. certifies that the equipment for which authorization is sought, is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature:
Bobo Lin Approbation Manager CFR 47 2.911(d)(5)(i) Attestation Letter
1 | Long term Confidentiality Letter | Cover Letter(s) | 91.32 KiB | December 15 2023 |
Whirlpool Microwave Products Development Limited. Address: 17th Fl, Elite Centre,22 Hung To Rd,Kwun Tong, Hong Kong Tel: 8675583811688 Email: Bobo_Lin@Whirlpool.com FCC Confidential Authorization Date: 2023-10-31 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: PR4FLUSHP2WP In accordance with Sections 0.457 and 0.459 of the Commissions Rules, Whirlpool Microwave Products Development Limited. hereby requests long-term confidential treatment of information accompanying this application as outlined below:
Block Diagram Schematics Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature:
Bobo Lin Approbation Manager
1 | agent | Attestation Statements | 18.65 KiB | December 15 2023 |
U.S. AGENT LETTER OF ATTESTATION Date: 2023-10-31 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 2.911(d)(7) Filing FCC ID: PR4FLUSHP2WP Whirlpool Microwave Products Development Limited. certifies that, as of the date of the filing of the application, Whirlpool Corporation is our designated U.S. agent for service of process for the above referenced FCC ID. Whirlpool Microwave Products Development Limited. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Whirlpool Corporation accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information:
Name: Whirlpool Corporation Address: 2000 N M-63, MD 4300, Benton Harbor, MI, 49022, USA FRN: 0011042405 Tel.: 918-697-1336 Email: cammie_k_rhodes@whirlpool.com Signed by (printed name): Cammie Rhodes Signature:
Applicant: Whirlpool Microwave Products Development Limited. Address: 17th Fl, Elite Centre,22 Hung To Rd,Kwun Tong, Hong Kong FRN: 0012635595 Tel: 8675583811688 Email: Bobo_Lin@Whirlpool.com Signed by (printed name): Bobo Lin Signature:
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2023-12-15 | 2450 ~ 2450 | 8CC - Part 18 Consumer Device | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2023-12-15
|
||||
1 | Applicant's complete, legal business name |
Whirlpool Microwave Products Development Limited.
|
||||
1 | FCC Registration Number (FRN) |
0012635595
|
||||
1 | Physical Address |
17th Fl, Elite Centre
|
||||
1 |
Kwun Tong, N/A 852
|
|||||
1 |
Hong Kong
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
t******@metlabs.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
PR4
|
||||
1 | Equipment Product Code |
FLUSHP2WP
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
B******** L****
|
||||
1 | Title |
Approbation Manager
|
||||
1 | Telephone Number |
86755********
|
||||
1 | Fax Number |
86755********
|
||||
1 |
B******@Whirlpool.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | 8CC - Part 18 Consumer Device | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Microwave Oven | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
CHINA CERTIFICATION ICT CO., LTD (DONGGUAN)
|
||||
1 | Name |
T**** O******
|
||||
1 | Telephone Number |
0086 ********
|
||||
1 |
q******@ccttt.com.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 18 | 2450.00000000 | 2450.00000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC