size:125*165MM XXXXXXXX Package contents and specification Installation notes Installation notes Device usage A D F B C E G PART DESCRIPTION QUANTITY A B C D E F G SL 100 SL 100 Stand Set screws plastic parts USB Adapter Audio output line out audio input to interface 1 1 3 1 1 1 1 Specif ication INPUT: 100-240V ~ 50/60Hz, 0.3A OUTPUT: 5V 1000mA OPERATION: Indoor/Outdoor OPERATING TEMPERATURE: -15 F TO 90 F (-26 C TO 32 C) WARRANTY: One Year Limited 1 1 Controller connection adapter as shown Connect USB charger 3 Take off SL100 stand as below show,
(picture 1) 1 2 3 parts are the screw hole location insert the tool to take off the up cover 1 STA mode (Connect your device to your phone) 1. Plug in and turn on the device, multi-color indicator light will on and get into STA mode, turn on your phone Wi-Fi The other port to link the device 2 Connect the power adapter to the power supply 2 1 3 Picture 1 Take off the up cover,and fix onto the wall with the screw plastic parts with the arrow up direction (Punch hole position on the wall and use screw plastic parts to fix stand.) Fix stand onto the wall, and put the up cover. 4 Put the SL100 onto the magnetic stand Input AUX WiFi Home Internet UltimateString_xxxx Neighbour Network WiFi Home Internet UltimateString_xxxx Neighbour Network 2. Connect your device to your phone via APP, turn on APP, register an account, after that, login the account, and operat as below shown SSID:WIFIXXXX BSSID:BO:XXXXXXX XXXXXX Password:
Device count:
1 Broadcast Multicast CONFIRM 2 3 4 Input AUX Smart Conlig Smart Conlig VOICE COMMAND CONVERTER INSTRUCTION MANUAL Device usage Audio input 3.When the multi-color indicator light becomes blue for 1 second, and then turns off, it means STA mode connects successful and get into connection mode 2 Audio input operational approach 1.Put the audio input port into AUX as below shown 2 Connect mode Control though Google, Alexa & google voice command, when the device get the control command, the green indicator light will be on, the above 2 control mode can also control the bluetooth lights color chang 3 Off-line mode Accident when the product in normal use, the orange indicator light of the device will be on, check the internet, when the internet get well, the device will automatic get network configuration, if success, the blue indicator will be on for 1 second, then go into the connection mode. 4 Press the Reset button for 5 seconds and recover to STA mode. 2.Connect the audio line between the SL 100 audio input interface and your phone(or other music player), then the lights will flash follow the music beat. Audio interface FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide r easonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the i nterference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
*RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Audio output: support connecting earphones and other audio play device 5 6 Scan & See Me!
www.ishowtree.com