(READ AND FALLOW ALL SAFETY INSTRUCTIONS) Quick Reference Guide How to operate the App?
2 Step 1: Download your Free Showhome App for your smartphone at:
Available on the App Store Type in the search option of either store and look for this icon. Step 2: Plug item. into an electrical socket. Step 3: Turn ON Bluetooth function. Make sure your Bluetooth on your smartphone is turned on. Smart device must be Bluetooth 4.0 and above compatible with Smartphone compatibility Android 4.3 or higher version,Supporting 4.0 Bluetooth. iOS 7.0 orhigher version,iPhone:4S,5,5S,6,6+,6S,6S+,SE,7,7+,8,8+,X. iPad:iPad3,ipadmini(1,2,3,4 series),iPad Air(1,2 series),iPad Pro. iPod touch Depending on what phone you use,there could be a delay of 10 seconds before your phone fully synce with your . Step 4: You're now ready to control your App product. This is the MAIN MENU and function of App. 3 2 4 5 7 Light Shows ShowHome Products Sync all ShowHome Products Product Mode Customise Specific light elements of your show. Laser projector Control 11 Function settings Timer Settings 3 Color Reference 6 Laser projector Mode Color mode of laser projector 8 Laser projector Motor ON / OFF 1 9 10 App+
ShowHome App is the most advanced way to control all your lights. Easily switch between colors and lighting effects. Combine colors with lighting effects and find the setting that works best for you. Step 5: Control your products with the below 11 main functions on your App. 4 1: ON / OFF Tap to turn On or Off Tap to Turn On Tap to Turn Off 2 : Light Shows Customizing your show mode Tap to Select There are 7 kinds of show modes to choose from No. 1 2 3 4 5 6 7 Light Shows Christmas Day Valentines' Day Independence Day Thanksgiving Day St. Patrick's day Halloween MultiColor Swipe Up or Down Sliding Selection Return Step 5: Control your products with the below 11 main functions on your App. 5 3: Timer Settings Set and cancel the time you want Tap to Select Swipe Up or Down Sliding Selection Timer Options or Turn Timer off TIMER OFF 2H 4H 6H 8H 4: ShowHome Products Sync all ShowHome products Gray icon:
Devices are not connected Tap to Switch 0 Orange icon:
Devices are connected 4 Orange icon with X :
Stays in current function, and cannot changed. 4 Troubleshooting After the product is plugged into the power supply and the APP does not display a connection. It may be because of 1,The product has not started normally.
(Resolve: Repower) 2,The product has been set up a password.
(Resolve:
Reelectric 3 times) 4 Number of connections Step 5: Control your products with the below 11 main functions on your App. 6 5: Product Mode Customize your show mode Tap to Select There are 10 kinds of show modes to choose from No. 1 2 3 4 5 6 7 8 9 10 Mode Name Steady Blink Sparkle Instead Fade Roll Ripple Fireworks Polar Light Color Show 6: Color Reference Customize your show color Up or Down Sliding Selection There are 28 color patterns to choose from No. 1 2 3 4 5 6 7 8 9 10 Color Name Red Green Gule Orange Pink Aque Gold Fuchsia Lawn green Magenta No. 11 12 13 14 15 16 17 18 19 20 Color Name Cyan Yellow purple Pure white Cold white Spring Summer Autumn Winter Christmas day No. 21 22 23 24 25 26 27 28 Color Name Valentines' day Independence day Thanksgiving Day St. Patrick's day Halloween Sun Earth Multi Color Step 5: Control your products with the below 11 main functions on your App. 7 7: Laser Projector Control Tap to Control Tap to Switch Gray icon:
Devices are not connected 0 Orange icon:
Devices are connected 3 Orange icon with X :
Stay in current function,and cannot by any click. 3 Troubleshooting After the product is plugged into the power supply, APP does not display the connection. It may be 1,The product has no normal start.
(Resolvent: REpower) 2,The product has been set up a password.
(Resolvent:
Reelectric 3 times) 8: Laser Projector Color Reference Multiple choices Tap to Select There are 3 color patterns to choose from No. 1 2 3 Color Name Red Green Bule Step 5: Control your products with the below 11 main functions on your App. 8 9: Laser Projector Mode Customize mode Tap to Select 3 models to choose from No. 1 2 3 Mode Name Steady Flash Gradient color 10: Laser Projector MotorCustomize motor Tap to Select 3 options for the motor to be controlled No. Motor Name Stop 1 Speed1 2 3 Speed2 Step 5: Control your products with the below 11 main functions on your App. 9 11: Function Setting Main page Tap Return a. String Lights Show Tap to Select Return Return Other settings 4 options No. 1 2 3 4 Setting name String lights show LED light bar show Set password User guided Control the direction of the lights flicker: left or right Flashing light, prompting its location Set the sequence of light flicker Selection of numbers Step 5: Control your products with the below 11 main functions on your App. 10 b. LED Light Bar Show Tap to Selection Return Return c. Set Password Tap to Select Return Return Control the direction of the lights flicker: left or right Flashing light, prompting its location Set the sequence of light flicker Selection of numbers 3 states of the cipher Current No Password Unknow Flashing light, prompting its location Lock the state, determine the modification Unencrypted state More information about products 11 product parameters No. Product Name Picture Describe 11 1 2 3 C9 Lights C6 Lights Icicles 4 LED Light Strip 5 Snow Flake 6 Christmas Tree Function:
1. RGB Lights 2. Timer 3. Function: 26 kinds of theme colors Standard: 10 kinds of patterns 3 kinds of theme shows selected 4. with APP+Bluetooth Smart controled control distance: 50m 5. with auto setting string lights illuminate sequentially 6. Multiple color+Super brightness 7. Control over 100 sets synchronized Standard / Approval:
FCC / UL / Bluetooth Certified Function:
1. RGB Lights 2. Timer 3. Function: 26 kinds of theme colors Standard: 10 kinds of patterns 3 kinds of theme shows selected 4. with APP+Bluetooth Smart controled control distance: 50m 5. with auto setting string lights illuminate sequentially 6. Multiple color+Super brightness 7. Control over 100 sets synchronized Standard / Approval:
FCC / UL / Bluetooth Certified Function:
1. RGB Lights 2. Timer 3. Function: 26 kinds of theme colors Standard: 10 kinds of patterns3 kinds of theme shows selected 4. with APP+Bluetooth Smart controledcontrol distance: 50m 5. Multiple color+Super brightness 6. Control over 100 sets synchronized Standard / Approval:
FCC / UL / Bluetooth Certified More information about products 11 product parameters No. Product Name Picture Describe 12 7 8 9 LED Spotlights Candy Canes Laser RGB 3D Hologram Projector 10 light Ball 11 RGB Show Tree Function:
1. RGB Lights 2. Timer 3 . Function: 26 kinds of theme colors Standard: 10 kinds of patterns 3 kinds of theme shows selected 4. with APP+Bluetooth Smart controled control distance: 50m 5. Multiple color+Super brightness 6. Control over 100 sets synchronized Standard / Approval:
FCC / UL / Bluetooth Certified Function:
1. RGB Lights 2. Timer 3. With APP+Bluetooth Smart controled control distance: 50m 4. Control over 100 sets synchronized 5. Unique patterns show 6. Project distance: 10m Standard / Approval:
FCC / UL / FDA / Bluetooth Certified Function:
1. RGB & White Ligths 2. Timer 3. with APP+Bluetooth Smart controled control distance:50m 4. Control over 100 sets synchronized 5. Unique patterns show 6. Battery supply Used for floating on water Standard / Approval:
FCC / UL / Bluetooth Certified Function:
1. RGB Lights 2. Timer 3. Function: 26 kinds of theme colors Standard:
10 kinds of patterns 3 kinds of theme shows selected 4. with APP+Bluetooth Smart controled control distance: 50m 5. Multiple color+Super brightness 6. Control over 100 sets synchronized Standard / Approval:
FCC / UL / Bluetooth Certified Frequently Asked Questions 13 Q:
A:
Q:
A:
Q:
A:
Q:
A:
My App can't connect with my products / devices Connectivity issues mainly occur because of a week bluetooth signal. Try these steps and see if they help the connection. 1.Shorten the distance between your phone and the product. 2.Turn off bluetooth functionality on your phone, and turn back on it again, Try recconnect the App with device again. 3.If the Above to options fail, then try cutting the power supply, take the plug out of the socket. Once clear for a few second place the plug back in to the socket and turn the power back on. Try recconnect the App with device again. App can connect with devices, but there are no product numbers displaying on the App, or product numbers are visible, but App cannot connect and control the products. 1. This could be because of a bad connection to the power supply. Cut the power suppl, unplug. Re insert the plug into the socket and turn the power on again. 2.If the present password is different between the products and App, then reset the prod-
ucts ( to do this, cut the power supply and plug into a socket, repeat this for 3 times quickly) 3.If the above options fail, then exit the App close it down completely then turn the App back on again. If the product numbers visible are more than the actual actual products. 1.The App may likely be connecting with nearby products, try setting a password for the products. If products change their mode without being controlled. This could be because of a nearby neighbor using the App, you need to set a password for the products. Important Safety Instructions 14 When using electrical products, basic precautions should always be followed including the following:
a) Read and following all safety instrucions. b) Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation c) This seasonal use product is not intended for permanent installation or use. d) Do not mount or place near gas or electric heaters, fireplace, candles or other similar sources of heat. e) Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails. f) Do not let lamps rest on the supply cord or on any wire. g) Unplug the product when leaving the house, when retiring for the night, or if left unattended. h) This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with or placed where small children can reach it. i) Do not use this product for other than its intended use. j) Do not hang ornaments or other objects from cord, wire, or light string. k) Do not close doors or windows on the product or extension cords as this may damage the wire insulation. l) Do not cover the product with cloth, paper or any material not part of the product when in use. m) This product employs overload protection (fuse). A blown fuse indicates and overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Also unplug any additional strings or products that may be attached to the product. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short-circuit may be present and the product should be discarded. n) Read and follow all instructions that are on the product or provided with the product. o) Save these instructions. Important Safety Instructions 15 Use and Care Instructions a) When the product is placed on a live tree, the tree should be well maintained and fresh. Do not place on live trees in which the needles are brown or break off easily. Keep the tree holder filled with water. b) If the product is placed on a tree, the tree should be well secured and stable. c) Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connectors connections, and wires. d) When storing the product, carefully remove the product from wherever it is placed, including tree, branches, or bushes, to avoid any undue strain or stress on the product conductors, connections, and wires e) When not the use, store neatly in a cool, dry location protected from sunlight. User Servicing Instructions Replace the fuse. a) Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling o b) Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades. c) Remove fuse carefully. d) Risk of fire. Replace fuse only with 3 Amp, 125 Volt fuse
(provided with product) e) Close fuse cover. Slide closed the fuse access cover on top of attachment plug. f) Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should not be removed. Discard product of the attachment plug is damaged. If connecting to a lighting string that does not have a Wattage (W) ratingfound on the tag within 6 inches of the plugcalculate the wattage as follows: Multiply the current ( A) which is on the flag-type tag by 120. For Example: Lighting string is rated 120V, 60Hz, 0.2 Amps. 0.2*120=24 Watts Add the wattage of each light string together for a total of 216 Watts or less. (Do not exceed 216 Watts) Important Safety Instructions 16 CAUTION 1. To reduce the risk of fire or electric shock, do not attempt to replace lamps or modify string. 2. To reduce the risk of fire and electric shock: a) Do not install on trees having needles leaves or branch coverings of metal or materials which look like metal, and b) Do not mount or support strings in a manner that can cut or damage wire insulation. Model No.: AL 91, AL92 FEDERAL COMMUNICATIONS COMMUISSION
(FCC) STATEMENT 17 FCC Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encour-
aged to try to correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiv-
er.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.
*RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environ-
ment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
(SAVE THESE INSTRUCTIONS)