FCC ID: C3D-AZ1000022 Basic Gateway 2x2

WINEGARD WG06-Basic Gateway 2X2 Specifications:

Wireless Standard: 802.11b/g/n Frequency Band: 2.4GHz Wireless Speed: 2.4GHz 300Mbps(Tx) Amplifiers: 2x2 MIMO Antennas: (2) 2.4GHz, (2) 4G LTE Antennas Wireless Security: WEP,WPA, WPAA2, WPA mixed Sim Card Port: Standard SIM (25mm x 15mm x .076mm) Port: (1) RJ45 10/100/1000 Power Rating: Switching, DC Input 12V,1.5A Specifications WARNINGS:

Read this manual carefully and completely before attempting to assemble, install or operate this product. Winegard recommends the installation of this equipment be done by a professional technician. Save these instructions. Do not paint any portion of the Winegard Connect Home. Painting the system could damage the system and will void the warranty. When first setting up the Winegard ConnecT it is recommended to check for software updates the first time the system is connected to an internet signal. It is also recommended to check for updates every couple months for fixes and added features. 1 2 3 4 5 FCC STATEMENTThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following methods:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and devices. Connect the equipment into an electrical outlet on a circuit different from that which the radio receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. Channels 1-11 can only be operated in the 2.4GHz band. Selection of other channels is not possible. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. FCC ID: C3D-AZ1000022 Contains FCC ID:C3D-201808EC25AF IC Regulatory Compliance This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. RF Exposure Compliance This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. Cet quipement est conforme aux limites d'exposition aux radiations IC CNR-102 tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. Disclaimer: Although every effort has been made to ensure that the information in this manual is correct and complete, no company shall be held liable for any errors or omissions in this manual. Information provided in this manual was accurate at time of printing. If the antenna does not function as expected, please contact Winegard Co. Winegard is a registered trademark of Winegard Company. LLC. Apple & the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. Google Play & the Google Play logo are trademarks of Google LLC. All trademarks, registered trademarks and logos are the property of their respective owners and are not affiliated with Winegard Company 6

LAN MAC:XXXXXXXXXXXX FCC ID

(Arial 4) S/N:

WG06204300001 FCC ID:C3D-AZ1000022 Contains FCC ID:C3D-201808EC25AF S/N S/N:WG06204300001 Serial Number

(Change with PO) Week Year

} (Change over me) WGProduct name; 06Type

(The product sticker printing information is as follows)

(carton sticker number)Number241-A00013-001 WGD-840FG011-BR WG06 MAIN BOARD BASIC GATEWAY 2X2 INDT PACK MYS 3962113 MADE IN MALAYSIA Print content fontArial 12 FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Form# : 03-1 (QP-4.4-2) Label Location: please see external photo on page 4.

Date: 2021-12-07 Print Name: Todd Wibben Title: Engineering Manager Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding:

To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co. Lid. SGS and Kobe Jian in SGS-CSTC Standards Technical Services Co. Ltd. SGS to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, | acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Winegard Company. This authorization is valid until further written notice from the applicant. On behalf of Company: Winegard Company Telephone: 319-931-1597 E-mail: twibb@winegard.com FCC ID: C3D-AZ1000022 Winegard Company

-- Just adding channel 12(2467MHz), channel13(2472MHz) of 802.11b/g/n HT20, adding channel 10(2457MHz), channel 11(2462MHz) of 802.11n HT40 via software. The Original grant approval by TCB, FCC ID:C3D-AZ1000022, Granted on 07/08/2021. Please be notified that we, the undersigned, (Winegard Company) declare that the reasons for this Class II permissive change are as below:

To: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Date: 2021-12-07 FCC ID: C3D-AZ1000022 Winegard Company Request for Class Il Permissive Change Print Name: Todd Wibben Title: Engineering Manager Telephone: 319-931-1597 E-mail: twibb@winegard.com On behalf of Company: Winegard Company

OF eam ual!

We, Wine ard Com an declare that this EUT

(FCC ID: C3D-AZ1000022) doesnt have ad Hoc Mode function on non-US/Canada frequencies. In addition, the frequency selection feature is disabled by firmware for devices marketed to the US/ Canada. For DTS part of this device, only channels 1-11 will be used in North America. Country code selection is disabled. Should you have any questions or comments regarding this matter, Please have my best attention. Sincerely, On behaif of Company: Winegard Company Telephone: 319-931-1597 E-mail: twibb@winegard.com Print Name: Todd Wibben Title: Engineering Manager

ae}

Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Oe) ine) =m Pee ca) From: Winegard Company Regarding: Confidentiality Request regarding application for FCC ID: C3D-AZ1000022 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 DOo1 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos Uy mare TA Tere}

Sincerely, Print Name: Todd Wibben Title: Engineering Manager Signature:

On behalf of Company: Winegard Company Telephone: 319-931-1597 SS tereli Pai 718)91 Plu ia(-re tc ke mee lat Winegard Company

SGS Applicant Declaration SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Winegard Company Address 3000 Kirkwood Street, Burlington, Iowa 52601, USA Grantee Code C3D FCC ID C3D-AZ1000022 Authorized Contact Name MWe YS leer!

eee aul] twibb@winegard.com Contact Phone CoE Eee mei I, the undersigned, certify that | am an authorized signatory for the Applicant and therefore declare;

a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

(1) labeling the equipment with the exact FCC ID as specified in this application,

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with 1ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing.

(2) the Applicant shaff make provisions to always have a production sample available upon request by SGS, FCC and/or ISED.

(3) the Applicant shall, upon request by SGS, at the Applicant's expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include al! support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: htt s:/Avww.fcc. ov/wireless/bureau-divisions/technolo ies-s stems-and-innovation-division/rules-re ulations-title-47 Link to KDBs: hit s://a_ s.fcc. ov/oetcf/kdb/index.cim Link to RSP-100: htt s:/Avwww.ic. c.ca/eic/site/smt- st.nsffen /sf01130.html Applicant Sig t e: Date: 2021-05-27 Print Name: TEER Aner a alites Engineering Manager Applicant Declaration Rev:0.0

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Ee Winegard Company Date: 2021-5-27 Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: C3D-AZ1000022 To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co. Ltd. SGS Shenzhen Branch and Keny Xu in SGS-CSTC Standards Technical Services Co. Ltd. SGS Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, | acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Winegard Company. This authorization is valid until further written notice from the applicant. Sylar kolN Print Name: Todd Wibben Title: Engineering Manager Signature:

On behalf of Company: Winegard Company Telephone: 319-931-1597 E-mail: twibb@winegard.com