FCC ID: 2APXW-ASMHS01 AIRSPEED MOBILE HOTSPOT

n o i t a m r o f n i y t n a r r a w d n a y t e f a s t c u d o r P Safety Information The topics in this section will introduce how to use your mobile hotspot device safely. Please read before proceeding THE DEVICE IS NOT FULLY CHARGED WHEN YOU TAKE IT OUT OF THE BOX. Important health safety precautions information and When using this product, the safety precautions below must be taken to avoid possible legal liabilities and damages. Retain and follow all product safety and operating instructions. Observe all warnings in the operating instructions on the product. To reduce the risk of bodily injury, electric shock, fire and damage to the equipment, observe the following precautions. Electrical safety This product is intended for use when supplied with power from the designated battery or power supply unit. Other usage may be dangerous and will invalidate any approval given to this product. Product Safety Warranty 1 Safety precautions grounding installation for proper Warning: Connecting to improperly grounded equipment can result in an electric shock to your device. This product is equipped with a USB Cable for connecting with a desktop or notebook computer. Be sure your computer is properly grounded (earthed) before connecting this product to the computer. The power supply cord of a desktop or notebook computer has an equipment grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Safety precautions for power supply unit Use the correct external power source. A product should be operated only from the type of power source indicated on the electrical ratings label. If you are not sure of the type of power source required, consult your authorized service provider or local power company. For a product that operates from battery power or other sources, refer to the operating instructions that are included with the product. 2 Product Safety Warranty This product should be operated only with the following designated power supply unit(s). Travel charger: Input: 100-240V, 50/60Hz, 0.5A. Output: 5V, 2A Battery must be used with caution:

This product contains a lithium polymer battery. There is a risk of fire and burns if the battery pack is handled improperly. Do not attempt to open or service the battery pack. Do not disassemble, crush, puncture, short circuit the external contacts or circuits, dispose of in fire or water, or expose a battery pack to temperatures higher than 140F (60C). The operating temperature for the device is

-4F (-20C) to 140F (60C). The charging temperature for the device is 32F (0C) to 113F (45C). Warning: Battery is removable. To reduce risk of fire or burns, do not disassemble crush, puncture, short circuit the external contacts expose to temperature above 140F (60C), or dispose of in fire or water. Do not attempt to replace the removable battery. The device and battery must be disposed or recycled of in accordance with locally applicable environmental regulations or guides supplied with your product. Product Safety Warranty 3 Take extra precautions Do not disassemble or open, crush, bend or deform, puncture or shred. Do not short circuit a battery or allow metallic conductive objects to contact battery terminals. Only use the USB cable provided with the device or that bear the USB-IF logo or have completed the USB-IF compliance program. Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, expose to fire, explosion or other hazard. Device usage by children should be supervised. Only use the battery with a charging system that has been qualified with the system per CTIA Certification Requirement for Battery System Compliance to IEEE1725. Use of an unqualified battery or charger may present a risk of fire, explosion, leakage or other hazard. Avoid dropping the device. If the device is dropped, especially on a hard surface, and the user suspects damage, take it to a service center for inspection. Improper battery use may result in a fire, explosion or other hazard. If the battery leaks:

- Do not allow the leaking fluid to come into contact with skin or clothing. If already in contact, flush the affected area immediately with clean water and seek medical advice.

- Do not allow the leaking fluid to come into contact with eyes. If already in contact, DO NOT rub; rinse with clean water immediately and seek medical advice.

- Take extra precaution to keep a leaking battery away from fire as there is a danger of ignition or explosion. 4 Product Safety Warranty Safety precautions for direct sunlight Keep this product away from excessive moisture and extreme temperatures. Do not leave the product inside a vehicle or in places where the temperature may exceed 140F (60C), such as on a car dashboard, window sill, or behind a glass that is exposed to direct sunlight or strong ultraviolet light for extended periods of time. This may damage or overheat the product, or pose a risk to the vehicle. Safety in aircraft Due to possible interference caused by this product to an aircraft's navigation system and its communications network, using this device's function on board an airplane is against the law in most countries. Environment restrictions Do not use this product in gas stations, fuel depots, chemical plants or where blasting operations are in progress, or in potentially explosive atmospheres such as fueling areas, fuel storehouses, below deck on boats, chemical plants, fuel or chemical transfer or storage facilities, and areas where the air contains chemicals or particles, such as grain, dust, or metal powders. Please be aware that sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Product Safety Warranty 5 Explosive atmospheres When in any area with a potentially explosive atmosphere or where flammable materials exist, the product should be turned off and the user should obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Users are advised not to use the equipment at refueling points, such as service or gas stations, and are reminded of the need to observe restrictions on the use of radio equipment in fuel depots, chemical plants, or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. These include fueling areas, below deck on boats, fuel or chemical transfer or storage facilities, and areas where the air contains chemicals or particles, such as grain, dust, or metal powders. Road safety Full attention must be given to driving at all times in order to reduce the risk of an accident. Using a device while driving causes distraction and can lead to an accident. You must comply with local laws and regulations restricting the use of wireless devices while driving. Safety precautions for RF exposure Avoid using your device near metal structures

(for example, the steel frame of a building). Avoid using your device near strong electromagnetic sources, such as microwave ovens, sound speakers, TV and radio. 6 Product Safety Warranty Use only original manufacturer-approved accessories, or accessories that do not contain any metal. Use of non-original manufacturer-approved accessories may violate your local RF exposure guidelines and should be avoided. Interference with medical equipment functions This product may cause medical equipment to malfunction. The use of this device is forbidden in most hospitals and medical clinics. If you use any other personal medical device, consult the manufacturer of your device to determine if they are adequately shielded from external RF energy. Your health care provider may be able to assist you in obtaining this information.Turn your device OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. Non-ionizing radiation Your device has an internal antenna. This product should be operated in its normal-use position to ensure the radioactive performance and safety of the interference. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, it is recommended that no part of the human body be allowed to come too close to the antenna during operation of the equipment. Product Safety Warranty 7 Use only the supplied integral antenna. Use of unauthorized or modified antennas may impair call quality and damage the device, causing loss of performance and SAR levels exceeding the recommended limits as well as result in noncompliance with local regular requirement in your country. To assure optimal device performance and ensure human exposure to RF energy is within the guidelines set forth in the relevant standards, always use your device only in its normal-use position. Contact with the antenna area may impair call quality and cause your device to operate at a higher power level that needed. Avoiding contact with the antenna area when the device is IN USE optimizes the antenna performance and the battery life. Electrical safety Accessories Use only approved accessories. Do not connect with incompatible products or accessories. Connection to a car Seek professional advice when connecting a device interface to the vehicle electrical system. 8 Product Safety Warranty Faulty and damaged products Do not attempt to disassemble the device or its accessories. Only qualified personnel must service or repair the device or its accessories. General precautions You alone are responsible for how you use your device and any consequences of its use. You must always switch off your device wherever the use of a device is prohibited. Use of your device is subject to safety measures designed to protect users and their environment. Avoid applying excessive pressure to the device Do not apply excessive pressure on the screen and the device to prevent damaging them. Remove the device from your pants' pocket before sitting down. Cracked display screens due to improper handling are not covered by the warranty. Device getting warm after prolonged use When using your device for prolonged periods of time, the device may become warm. In most cases, this condition is normal and therefore should not be interpreted as a Product Safety Warranty 9 problem with the device. Heed service markings Except as explained elsewhere in the Operating or Service documentation, do not service any product yourself. Service needed on components inside the device should be done by an authorized service technician or provider. Protect your device Always treat your device and its accessories with care and keep them in a clean and dustfree place. Do not expose your device or its accessories to open flames or lit tobacco products. Do not expose your device or its accessories to liquid, moisture or high humidity. Do not drop, throw or try to bend your device or its accessories. Do not use harsh chemicals, cleaning solvents, or aerosols to clean the device or its accessories. Do not paint your device or its accessories. Do not attempt to disassemble your device or its accessories. Only authorized personnel must do so. Do not expose your device or its accessories to extreme temperatures, minimum -4F (-20C) and maximum 140F

(60C). Please check local regulations for disposal of electronic products. Do not carry your device in your back pocket as it could break when you sit down. 10 Product Safety Warranty Damage requiring service Unplug the product from the electrical outlet and refer servicing to an authorized service technician or provide under the following conditions:

Liquid has been spilled or an object has fallen into the product. The product has been exposed to rain or water. The product has been dropped or damaged. There are noticeable signs of overheating. The product does not operate normally when you follow the operating instructions. Avoid hot areas The product should be placed away from heat sources such as radiators, heat registers, stoves, or any device producing heat. Avoid wet areas Never use the product in a wet location. Product Safety Warranty 11 Avoid using your device after a dramatic change in temperature When you move your device between environments with very different temperature and/or humidity ranges, condensation may form on or within the device. To avoid damaging the device, allow sufficient time for the moisture to evaporate before using the device. Notice: When taking the device from low temperature conditions into a warmer environment or from high-temperature conditions into a cooler environment allow the device to acclimate to room temperature before turning on power. Avoid pushing objects into product Never push objects of any kind into cabinet slots or other openings in the product. Slots and openings are provided for ventilation. These openings must not be blocked or covered. Airbags Do not place a device in the area over an airbag or in the airbag deployment area. Store the device safely before driving your vehicle. Mounting accessories Do not use the product on an unstable table, cart, stand, 12 Product Safety Warranty tripod or bracket. Any mounting of the product should follow the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer. Avoid unstable mounting Do not place the product with an unstable base. Cleaning Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning, but NEVER use water to clean the LCD screen. Small children Do not leave your device and its accessories within the reach of small children or allow them to play with it. They could hurt themselves, or others, or could accidentally damage the device. Your device contains small parts with sharp edges that may cause an injury, or which could become detached and create a choking hazard. Operating machinery Full attention must be given to operating machinery in order to reduce the risk of an accident. Product Safety Warranty 13 FCC Regulations This mobile hotspot device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile hotspot device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 14 Product Safety Warranty Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF Exposure Information (SAR) This mobile hotspot device meets the government's requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless mobile hotspot devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station, the lower the power output. While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement. Product Safety Warranty 15 The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID:

2APXW-ASMHS01. For body worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and positions the handset a minimum of 1.5 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. If you do not use a body-worn accessory and are not holding the device at the ear, position the handset a minimum of 1.5 cm from your body when the device is switched on. 16 Product Safety Warranty Warranty Information The Airspeed mobile hotspot is covered by the Verizon 2-year warranty. Warranty With this manufacturer's warranty (hereinafter: the

"Warranty"), Emblem Solutions (hereinafter: the

"Manufacturer") quarantees this product against any material, design, and manufacturing defects. The duration of this Warranty is specified in article 1 below This Warranty does not affect your statutory rights, which cannot be excluded or limited, in particular in relation to the applicable legislation on defective products. Warranty DurationThe product may consist of several parts, which may have separate warranty periods, to the extent permitted by local laws. The "Warranty Period" (as defined in the table below) takes effect on the date of purchase of the product (as indicated on the proof of purchase) 1. Warranty Period 24 Months Phone USB Cable and Charger 12 Months Other Accessories (if included in the box) 12 Months 2. Warranty period for repaired or replaced parts: Subject to special provisions of local laws in force, the repair or replacement of a product does not, under any circumstances whatsoever, extend the original warranty Product Safety Warranty 17 period of the product concerned. However, the repaired or replaced parts are quaranteed in the same manner and for the same defect for a period of ninety days after delivery of the repaired product, even iftheir initial warranty period has expired. Proof of purchase required. Implementation of the Warranty If your product is faulty umal conditions of use and maintenance, in order to benefit from the present warranty, please contact Verizon Customer Service at 800922-0204 for assistance. The customer support center will then provide you with instructions on how to return the product for support under warranty. Warranty Exclusions Manufacturer guarantees its products against material, design, and manufacturing defects. The Warranty does not apply in the following cases:

1. Normal wear and tear of the product (including on the camera lenses, batteries, and screens) requiring periodic repair and replacement. 2. Defects and damages due to negligence, to the product being used other than in a normal and customary manner, to the non-compliance with the recommendations of this User Manual, to an accident, regardless of the cause. Instructions for use and maintenance of the product can be found in your product's User Manual. 3. The opening, unauthorized disassembly, modification being carried out or repair of the product by the end-user or by persons or by service providers not approved by Manufacturer and/or with spare parts not approved by 18 Product Safety Warranty Manufacturer. 4. Use of the product with accessories, peripherals, and other products whose type, condition, and/or standards do not meet Manufacturer's standards. 5. Defects associated with the use or connection of the product to equipment or software not approved by Manufacturer. Some defects may be caused by viruses due to unauthorized access by yourself or by a third-party service, computer systems, other accounts, or networks. This unauthorized access may take place through hacking, misappropriation of passwords, or various other means. 6. Defects and damage due to the exposure of the product to humidity, extreme temperatures, corrosion, oxidation, or to any spillage of food or liquids, chemicals, and generally any substance likely to alter the product. 7. Any failure of embedded services and applications that have not been developed by Manufacturer and whose functioning is the exclusive responsibility of their designers. 8. Installation and use of the product in a manner that does not comply with the technical or security standards of requlations in force in the country where it's installed or used. 9. Modification, alteration, degradation or illegibility of the IMEl number, serial number or EAN of the product. 10. Absence of proof of purchase. Upon expiration of the warranty period or upon an exclusion of warranty, Manufacturer may, at its discretion, provide a quote for the repair and offer to provide support for the product, at your cost. The Manufacturer contact and after-sales service details are subject to change. These Warranty terms may vary substantially according to your country of residence. Product Safety Warranty 19

r e m u s n o c t n a t r o p m I n o i t a m r o f n i y t e f a s Safety of radio frequency emissions:

Your wireless device emits radio frequency energy during use. According to the Federal Communications Commission, Some health and safety interest groups have interpreted certain reports to suggest that wireless device use may be linked to cancer and other illnesses, posing potentially greater risks for children than adults. While these assertions have gained increased public attention, currently no scientific evidence establishes a causal link between wireless device use and cancer or other illnesses. Additional information is available from the FCC at www.fcc.gov/encyclopedia/radio-frequency-

safety or from Verizon at verizonwireless.com/aboutus/

commitment/safety-security.html. Caution! Avoid potential hearing loss:

Prolonged exposure to loud sounds (including music) can cause hearing loss. You should follow some commonsense recommendations when using any portable audio device:

Use the lowest volume at which you can hear adequately When using headphones, turn the volume down if you cannot hear the people speaking near you Do not turn the volume up to block out noisy surroundings; use noise-canceling headphones instead Avoid using headphones after exposure to loud noises that might cause temporary hearing loss;

temporary hearing loss might cause unsafe volumes to sound normal If you experience discomfort or temporary hearing difficulty while or after listening to a portable audio device, discontinue use and consult your doctor if symptoms persist Drive responsibly:

Safe driving is your responsibility and should always be your first priority. Never text while driving. The National Highway Traffic Safety Administration

(NHTSA) advises that the safest course of action is to refrain from using a cell phone while driving and that using a wireless phone may degrade driver performance even if you are using a hands-free device. Always know and comply with the law in your area on wireless device use while driving. For more information see www.nhtsa.gov (click on Driving Safety then on Distracted Driving). Implantable medical devices:

A minimum separation distance of 6 inches should be kept between a wireless phone and an implantable medical device, such as a pacemaker or implantable cardioverter defibrillator, to avoid potential interference with the device. Persons who have such devices:

Should not carry the wireless phone in a breast pocket Should use the ear opposite the implantable medical device to maintain 6 inches of separation Should turn the wireless phone OFF immediately if Should read and follow the directions from the medical interference is suspected device manufacturer If you have questions about using your wireless phone with such a device, consult your health care provider. See www.fda.gov for additional information (under c in the subject index, select Cell Phones > Interference with Pacemakers and Other Medical Devices). 2021 Verizon. All Rights Reserved. Legal1116

Quick Start Quick Start Guide Guide T O P S T O H E L B O M I D E E P S R A I Have questions about your Prepaid mobile hotspot?

Youre in the right place. Getting Started Find out how to set up and use your mobile hotspot, access Getting Started special features, get help and lots more. Were here to help. Thank you for choosing Orbic Thank you for choosing Orbic Speed 4G LTE mobile hotspot Speed 4G LTE mobile hotspot device. device. Note:

Note:

This User Guide provides the basic This User Guide provides the basic operations of the Orbic Speed. operations of the Orbic Speed. About your mobile hotspot General appearance General Appearance General Appearance 1. Menu/Navigation button 2. Power/OK button 1. Menu button 3. Signal strength 2. Signal status icon 1. Menu button 4. New message notification 3. Network mode icon 2. Signal status icon 5. Battery indicator 4. Wi-Fi signal icon 3. Network mode icon 6. USB Type C Charging Port 5. Unread message icon 4. Wi-Fi signal icon 7. Menu Option Icons 6. Battery icon 5. Unread message icon 7. Power button 6. Battery icon 8. USB Type C port 7. Power button 9. Battery cover 8. USB Type C port 10. Cutout to remove back cover 9. Battery cover 10. Cutout to remove back cover 2 1 8. Icon Labels:

1)Wi-Fi Info 2)Device List 3)Menu 9. Data Usage Information 10.More Settings 11.Device Details 12.Battery back cover t o p s t o h e l i b o m r u o y t u o b A 6 543 87 9 10 11 12 NOTE: Appearance of device may vary. 1 2 3 4 5 Using your mobile hotspot 1 2 6 6 3 4 Description Display layout and icons Display Layout and Icons 1. Signal status icon Display Layout and Icons 5 3 4 1 2. Network mode icon 5 2 3. Send/receive data activity arrows 4. The number of unread messages 7 maximum is 100 5. Battery capacity iconif battery capacity is lower than 25%, this icon is red 6. Data statisticsused/total Description 1. 2. 2. 3. 4. 4. 3. 5. 1. 5. 6. 7 Signal status icon Signal status icon Network mode icon Network mode icon Send/receive data activity arrows Send/receive data activity arrows Wi-Fi signal and number of access users Wi-Fi signal and number of access users The number of unread message maximum is 100 The number of unread message maximum is 100 Battery capacity icon, if battery capacity is lower than 25%, this icon is red. Battery capacity icon, if battery capacity is lower than 25%, this icon is red. Data statistics, used/total 6 Data statistics, used/total 7. 6. 7. t o p s t o h e l i i b SIM card and battery o SIM Card and Battery m Your Airspeed mobile hotspot comes preinstalled with a 4G LTE SIM Card and Battery r Your Orbic Speed comes preinstalled with a 4G LTE SIM card. u SIM card. o Your Orbic Speed comes preinstalled with a 4G LTE SIM card. y Notes:

g n Notes:

NOTE:

s U The SIM card MUST remain in your Orbic Speed when in use. Once the SIM card has been inserted into the Orbic Speed, do not remove!

when in use. Once the SIM card has been inserted into the mobile hotspot, do not remove. The SIM card MUST remain in your Orbic Speed when in use. Once the SIM card has been inserted into the Orbic Speed, do not remove!

DO NOT remove SIM card when the device is powered on since this may damage the card and the device. DO NOT remove SIM card when the device is powered on Do not remove SIM card when the device is powered on since this may damage the card and the device. Do not bend or scratch your SIM card. Avoid exposing your SIM card to static electricity, water or dirt. because this may damage the card and the device. Do not bend or scratch your SIM card. Avoid exposing your Do not bend or scratch your SIM card. Avoid exposing your SIM card to static electricity, water or dirt. Navigating Through the Orbic Speed SIM card to static electricity, water or dirt. Navigating Through the Orbic Speed Use the MENU and POWER button to select actions displayed at the bottom of Navigating through the Airspeed mobile hotspot the screen. There are 8 main menu screens in addition to the home screen. Use the MENU and POWER button to select actions displayed at the bottom of Use the Menu and Power buttons to select actions displayed the screen. There are 8 main menu screens in addition to the home screen. at the bottom of the screen. There are 8 main menu screens in addition to the home screen. Inserting and charging the battery 1. Inserting and Charging the Battery Inserting and Charging the Battery 1. Use the thumb catch at the bottom of your Airspeed mobile hotspot to open the battery cover and align the battery contacts with the terminals in the battery compartment as Use the thumb catch at the bottom of your Orbic Speed to open shown. Push the battery down until it clicks into place. the battery cover and align the battery contacts with the terminals in the battery compartment as shown. Push the battery down until it clicks into place. (Figure 1 and 2) Use the thumb catch at the bottom of your Orbic Speed to open the battery cover and align the battery contacts with the terminals in the battery compartment as shown. Push the battery down until it clicks into place. (Figure 1 and 2)

(Figure 1 and 2) 2. 1. 1. Figure 1 Figure 1 Figure 2 Figure 2 2. 2. Place the battery cover over the battery compartment and Place the battery cover over the battery compartment and press it downward until it clicks into place. (Figure 3) press it downward until it clicks into place. (Figure 3) Place the battery cover over the battery compartment and press it downward until it clicks into place. (Figure 3) 2. Removing the 4G LTE SIM Card Removing the 4G LTE SIM Card Power off the Orbic Speed. Remove the battery cover and take out the battery. Setting up Wi-Fi connection Gently remove the SIM card from the SIM card slot. Setting up Wi-Fi connection 1. 2. Press and hold the power button for 3 seconds until the welcome logo is displayed on the Screen, and Wi-Fi is on. Use your terminal device to search for the wireless network connection with the WiFis SSID Verizon-RC400L-CE and click Connect. Enter PASSWORD. The Password can be found by going to the 2.4GHz WIFI info or 5GHz WIFI Info screen. The password is displayed next to the lock icon. 1. 2. 1. 2. t o p s t o h e l i b o m r u o y g n s U i Figure 3 Figure 3 3. 3. Your Orbic Speed comes with a charger. To charge, plug it into an electrical outlet. Connect the USB cable to the charger and the other end into the Orbic Speed Type-C Port. (Figure 4) Your Orbic Speed comes with a charger. To charge, plug it into an electrical outlet. Connect the USB cable to the charger and the 2. 3. Your Airspeed mobile hotspot comes with a charger. To charge, other end into the Orbic Speed Type-C Port. (Figure 4) plug it into an electrical outlet. Connect the USB cable to the charger and the other end into the Airspeed mobile hotspot. 1. 1. 2. Type-C port. (Figure 4) Logging into the Device Management Website Logging into the Device Management Website Make sure your device is connected to the Orbic Speed via Wi-Fi. Open the browser, and enter http://192.168.1.1 or http://my.jetpack in the address bar. Enter username and password and click Login You have the ability to modify the password and user name and configuration. Enter username and password and click Login You have the ability to modify the password and user name and configuration. Note:

Wifi password . See Setting up WiFi connection. Note: The default username is admin; the default password is the same as the Wifi password . See Setting up WiFi connection. Back Home Back Home Figure 4 Figure 4 Figure 4 Removing the 4G LTE SIM card 1. Power off the Airspeed mobile hotspot Remove the battery

. Removing the 4G LTE SIM Card cover and take out the battery. Removing the 4G LTE SIM Card 2. Gently remove the SIM card from the SIM card slot. Power off the Orbic Speed. Remove the battery cover and take out the battery. Power off the Orbic Speed. Remove the battery cover and take out the battery. Setting up Wi-Fi connection Gently remove the SIM card from the SIM card slot. Setting up Wi-Fi connection Setting up Wi-Fi connection Gently remove the SIM card from the SIM card slot. Press and hold the power button for 3 seconds until the welcome logo is displayed on the Screen, and Wi-Fi is on. 1. Press and hold the Power button for 3 seconds until the welcome logo is displayed on the screen and Wi-Fi is on. 2. Use your terminal device to search for the wireless network connection with the Wi-Fis SSID Verizon-RC400L-CE and click Connect. Enter password. The password can be found by going to the 2.4 GHz Wi-Fi or 5 GHz Wi-Fi info screen. The password is displayed next to the lock icon. Press and hold the power button for 3 seconds until the welcome logo is displayed on the Screen, and Wi-Fi is on. Use your terminal device to search for the wireless network connection with the WiFis SSID Verizon-RC400L-CE and click Use your terminal device to search for the wireless network Connect. Enter PASSWORD. The Password can be found by connection with the WiFis SSID Verizon-RC400L-CE and click going to the 2.4GHz WIFI info or 5GHz WIFI Info screen. The Connect. Enter PASSWORD. The Password can be found by password is displayed next to the lock icon. going to the 2.4GHz WIFI info or 5GHz WIFI Info screen. The password is displayed next to the lock icon. Logging into the device management website 1. Make sure your device is connected to the Airspeed mobile hotspot via Wi-Fi. 2. Open the browser, and enter http://192.168.1.1 or my.mobilehotspot in the address bar. t o p s t o h e l i b o m r u o y g n s U i Enter username and password and click Login. You have the ability to modify the password and user name and configuration. NOTE: The default username is admin; the default password is the same as the Wi-Fi password. See Setting up Wi-Fi connection. Logging into the Device Management Website Logging into the Device Management Website Make sure your device is connected to the Orbic Speed via Wi-Fi. How to change the username and password Make sure your device is connected to the Orbic Speed via Wi-Fi. Open the browser, and enter http://192.168.1.1 or http://my.jetpack in the address bar. 1. Log in to http://192.168.1.1 or my.mobilehotspot and select Open the browser, and enter http://192.168.1.1 or http://my.jetpack in the address bar. Settings, and enter the Management page. Enter username and password and click Login You have the ability to modify the password and user name and configuration. password that you want to change. Enter username and password and click Login You have the ability to modify the password and user name and configuration. 2. Select System Admin. Enter current and new user name or The default username is admin; the default password is the same as the 3. Select Apply button, wait for the screen to display Success, Wifi password . See Setting up WiFi connection. The default username is admin; the default password is the same as the and then log out. Wifi password . See Setting up WiFi connection. Support and more Troubleshooting If you are having trouble with Airspeed mobile hotspot, here are a few things you can do to get it to function properly. 1. If the mobile hotspot is not responsive, reboot it by pressing the Power button for about 8 seconds. 2. Restore factory settings. From your computer, visit verizon.com/support. Customer service Call 800.922.0204 Twitter @VZWSupport e r o m d n a t r o p p u S Important customer information The services described in this guide are only for your personal use. Services are subject to the Customer Agreement which can be found at vzw.com/csa, your Plan, and the Verizon Privacy Policy. For more information about our privacy practices visit verizon.com/privacy. n o i t a m r o f n i r e m o t s u c t n a t r o p m I 2021 Verizon. All Rights Reserved. Quick Start Guide T O P S T O H E L B O M I D E E P S R A I Tienes preguntas sobre tu hotspot mvil Prepaid?

Ests en el lugar correcto. Entrate de cmo configurar y usar tu hotspot mvil, acceder a funciones especiales, obtener asistencia y mucho ms. Estamos aqu para ayudarte. Getting Started Thank you for choosing Orbic Speed 4G LTE mobile hotspot device. Note:

This User Guide provides the basic operations of the Orbic Speed. l i v m t o p s t o h u t e d a c r e c A 8. Etiquetas de conos:

1)Informacin Wi-Fi 2)Lista de dispositivos 3)El men 9. Informacin de uso de datos 10. Ms ajustes 11. Detalles del dispositivo 12. Batera cubierta trasera Acerca de tu hotspot mvil Apariencia general General Appearance 1. Botn de men/navegacin 2. Botn de encendido /OK 3. Intensidad de la seal 4. Notificacin de nuevo mensaje 5. Indicador de batera 6. Puerto de carga USB tipo C 1. Menu button 7. cono de informacin de Wi-Fi 2. Signal status icon 3. Network mode icon 4. Wi-Fi signal icon 5. Unread message icon 6. Battery icon 7. Power button 8. USB Type C port 9. Battery cover 10. Cutout to remove back cover 543 2 1 6 87 9 10 11 12 NOTA: La apariencia del dispositivo puede variar. Cmo insertar y cambiar la batera 1. Usa la hendidura en la parte inferior de tu Airspeed Mobile Hotspot para abrir la tapa de la batera y alinear los contactos de la misma con las terminales en el compartimento de la batera, tal como se muestra. Empuja la batera hacia abajo hasta que encaje en su lugar. (Figura 1 y 2) 1. 7 Use the thumb catch at the bottom of your Orbic Speed to open the battery cover and align the battery contacts with the terminals in the battery compartment as shown. Push the battery down until it clicks into place. (Figure 1 and 2) Inserting and Charging the Battery Removing the 4G LTE SIM Card Setting up Wi-Fi connection Figure 1 Figure 2 2. Coloca la tapa de la batera sobre el compartimento y Figure 1 presinalo hacia abajo hasta que encaje en su lugar. (Figura 3) Figure 2 2. Place the battery cover over the battery compartment and press it downward until it clicks into place. (Figure 3) 1. 2. l i v 1. m t 2. o p s t o h u t r a s u o m C Cmo usar tu hotspot mvil Disposicin de la pantalla e conos 1. cono de estado de seal 2. cono de modo de red 3. Flechas de actividad de datos Display Layout and Icons enviados/recibidos 5 6 1 4. El nmero mximo de mensajes Description 3 4 2 1 2 3 4 5 l i v m t o p s t o h u t r a s u o m C no ledos es 100 1. Signal status icon 5. cono de capacidad de la batera si la capacidad de la batera es menos de 25%, este cono estar en rojo 2. 3. 4. 7 Network mode icon Send/receive data activity arrows 5. Wi-Fi signal and number of access users 10 9 The number of unread message maximum is 100 8 6 6. Estadisticas de datosusados/total 7. cono de actualizacin de datos 8. cono de informacin de Wi-Fi 9. cono de dispositivos conectados 10. cono del men de ajustes 6. 7. Battery capacity icon, if battery capacity is lower than 25%, this icon is red. Data statistics, used/total Tarjeta SIM y batera SIM Card and Battery Tu Airspeed Mobile Hotspot viene con una tarjeta SIM Your Orbic Speed comes preinstalled with a 4G LTE SIM card. 4G LTE preinstalada. Notes:

NOTA:

The SIM card MUST remain in your Orbic Speed when in use. Once the SIM card has been inserted into the Orbic Speed, do not remove!

La tarjeta SIM DEBE permanecer en tu Airspeed Mobile Hotspot cuando lo ests usando. Una vez que hayas insertado la DO NOT remove SIM card when the device is powered on tarjeta SIM en el hotspot mvil, no la retires. since this may damage the card and the device. No retires la tarjeta SIM cuando el dispositivo est Do not bend or scratch your SIM card. Avoid exposing your SIM card to static electricity, water or dirt. encendlido, ya que esto puede daar la tarjeta y el dispositivo. No dobles ni rasgues la tarjeta SIM. Evita exponer tu tarjeta Navigating Through the Orbic Speed SIM a electricidad esttica, agua o suciedad. Use the MENU and POWER button to select actions displayed at the bottom of the screen. There are 8 main menu screens in addition to the home screen. Cmo navegar por el Airspeed Mobile Hotspot Usa el Men y el botn de Encendido para seleccionar las acciones que se muestran en la parte inferior de la pantalla. Hay 10 pantallas de men principal adems de la pantalla de inicio. Figure 3 3. 3. Tu Airspeed Mobile Hotspot viene con un cargador. Para cargarlo, enchfalo en un enchufe elctrico. Conecta el Your Orbic Speed comes with a charger. To charge, plug it into an electrical outlet. Connect the USB cable to the charger and the cable USB al cargador y el otro extremo al puerto Tipo C del other end into the Orbic Speed Type-C Port. (Figure 4) Airspeed Mobile Hotspot.(Figura 4) 1. 2. Logging into the Device Management Website Enter username and password and click Login You have the ability to modify the password and user name and configuration. Note:

Wifi password . See Setting up WiFi connection. Back Home Figure 4 Figure 4 Cmo extraer la tarjeta SIM 4G LTE 1. Apaga el Airspeed Mobile Hotspot . Quita la tapa de la batera y Asistencia y mucho ms saca la batera. 2. Extrae la tarjeta SIM de la ranura con suavidad. Solucin de problemas Si tienes problemas con Airspeed Mobile Hotspot , estas son algunas cosas que puedes hacer para que funcione correctamente. 1. Si el hotspot mvil no funciona, reincialo oprimiendo el botn de Encendido por unos 8 segundos. 2. Restablece la configuracin de fbrica. En tu computadora, visita verizon.com/support. Servicio al cliente Llama al 800.922.0204 Twitter @VZWSupport Removing the 4G LTE SIM Card Cmo configurar la conexin de Wi-Fi Setting up Wi-Fi connection Power off the Orbic Speed. Remove the battery cover and take out the battery. 1. Mantn presionado el botn de Encendido por 3 segundos hasta que el logotipo de bienvenida aparezca en la pantalla y el Wi-Fi est activado. Gently remove the SIM card from the SIM card slot. 2. Usa tu dispositivo terminal para buscar la conexin de red l i v m Press and hold the power button for 3 seconds until the welcome logo is displayed on the Screen, and Wi-Fi is on. mvil con el SSID de Wi-Fi Verizon-RC400L-CE y haz clic en Conectar. Ingresa la contrasea. Puedes encontrar la contrasea en la pantalla de informacin de Wi-Fi 2.4 GHz o Wi-Fi 5 GHz. La contrasea aparece junto al cono de candado. Use your terminal device to search for the wireless network connection with the WiFis SSID Verizon-RC400L-CE and click Connect. Enter PASSWORD. The Password can be found by going to the 2.4GHz WIFI info or 5GHz WIFI Info screen. The password is displayed next to the lock icon. Inicia sesin en el sitio web de administracin del dispositivo 1. Asegrate de que tu dispositivo est conectado al Airspeed Mobile Hotspot a travs de Wi-Fi. 2. Abre el navegador e ingresa http://192.168.1.1 o my.mobilehotspot en la barra de direcciones. t o p s t o h u t r a s u o m C Ingresa el nombre de usuario y la contrasea, y haz clic en Iniciar sesin. Puedes modificar la contrasea, el nombre de usuario y la configuracin. NOTA: El nombre de usuario predeterminado es admin; la contrasea predeterminada es la misma que la contrasea de Wi-Fi. Consulta Cmo configurar la conexin de Wi-Fi. Logging into the Device Management Website Make sure your device is connected to the Orbic Speed via Wi-Fi. Cmo cambiar el nombre de usuario y contrasea 1. Inicia sesin en http://192.168.1.1 o en my.mobilehotspot y Open the browser, and enter http://192.168.1.1 or http://my.jetpack in the address bar. selecciona Configuracin, e ingresa a la pgina de Administracin. Enter username and password and click Login You have the ability to modify the password and user name and configuration. 2. Selecciona System Admin (Administracin del sistema). Ingresa el nombre de usuario actual y el nuevo o la The default username is admin; the default password is the same as the contrasea que deseas cambiar. Wifi password . See Setting up WiFi connection. 3. Selecciona el botn Apply (Aplicar). Espera a que aparezca la pantalla que diga Success (xito) y luego cierra la sesin. s m o h c u m y a c n e t s s A i i Informacin importante para el cliente Los servicios descritos en esta gua son solo para tu uso personal. Los servicios estn sujetos al Acuerdo con el Cliente que se encuentra en vzw.com/csa, tu Plan y la Poltica de privacidad de Verizon. Para obtener ms informacin sobre nuestras prcticas de privacidad, visita verizon.com/privacy. e t n e i l c l e a r a p e t n a t r o p m i i n c a m r o f n I 2021 Verizon. Todos los derechos reservados.

1 TT 0) CONE ?

IMEI: 8 04962 OU mm AIRSPEED MOBILE HOTSPOT For setting & info, connect then visit http://my.airspeed FCC ID: 2APXW-ASMHS01 Date Code: 20210126 Model: ASMHS01 SKU: ASMHS01PP HY AVY AML ANTE IMEI: 3123456789XXXXX Designed by Wingtech Manufactured in India

Wingtech Group (Hongkong) Limited Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2APXW-ASMHS01 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagram Schematic BOM Operation Description Tune up File Name ASMHS01_Block Diagram ASMHS01_SCH ASMHS01_BOM ASMHS01_Operation Description ASMHS01_Tune up The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, we also request temporary confidential treatment of information accompanying this application as outlined below for a period of 45days:

Exhibit Type Hardware_User_Manual File Name ASMHS01_Hardware_User_Manual Sincerely, print name: RuiSha Rev 11/20/07

RF_160, Issue 04 Wingtech Group (Hongkong) Limited Declaration of Authorization We Name: Wingtech Group (Hongkong) Limited Address: Flat/RM 1903 ,19/F, Podium Plaza, 5 Hanoi Road, Tsim Sha Tsui, Kowloon,Hongkong Country: China Declare that:

Name Representative of agent: Jim Huang Agent Company name: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Address: No.1 Workshop, M-10, Middle Section, Science & Technology Park, City: Shenzhen Country: China is authorized to apply for Certification of the following product(s):

Product description: AIRSPEED MOBILE HOTSPOT ASMHS01 Type designation:

AIRSPEED MOBILE HOTSPOT Trademark:

on our behalf. Date:

City:

Name:

Signature:

2021/5/7 Shanghai RuiSha Function:

Certification Manager Notes:

(1): Required for FCC application

(2): For FCC it must be the Grantee Code owner or the authorized agent.