dyy Ty 00amp Ae] dstp//
ON [SPO a6IL IMPORTANT SAFEGUARDS 1. Read ail of these instructions. 2. Save these instructions for later use. 3. Unplug this monitor from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use attachments not recommended by the monitor manufacturer as they may cause hazards. 5. Do not use this monitor near water, e.g., near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc. 6. Do not place this monitor on an
+ unstable cart, stand, or table. The monitor may fall, causing serious injury to a child or adult, and serious damage to the appliance. avis 7. Slots and openings in the
(ey ks) cabinet and the back or bottom are provided for ventilation, to ensure ee, reliable operation of the monitor, and to protect it from overh:
These openings must not be blocked or cove:
The openings should never be blocked by placing the monitor on a bed, sofa, rug, or other similar surface. This monitor should never be laced near or over a radiator or heat register. monitor should not be placed in a built-in installation such as a bookcase unless proper ventilation is provided. 8. This monitor should be operated only from the type of power source YO indycated on the marking label. If you are not sure of the power supplied to your home, consult 9. This monitor is equipped with a 3-wire grounding-type type plug, That is, a plug having a thi
(grounding) pin. This plug will only fit into a grounding- Ps If you are power outlet. This is a safety feature. unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the purpose of the grounding-type plug. f2 * 10. Do not allow anything to rest 3 on the power cord. Do not locate Nv this monitor where the cord will be abused by people walking on it. 11. Follow all warnings and instructions marked on the monitor. 12. For added protection for this monitor during a lightning storm,
* or when it is left unattended and
+, unused for long periods of time,
: unplug it from the wall outlet. This will prevent damage to the monitor and/or the computer due to lightning and power line surges. 13. Do not overload wall outlets and extension cords as this can result in fire or electric shock. 14. Never push objects of any kind into this monitor through cabinet slots, as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the monitor. 15. Do not attempt to service this monitor yourself, as opening or removing covers may expose you to dangerous voltages or other hazards. Refer all servicing to qualified service personnel. 16. Unplug this monitor from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the monitor. c. If the monitor has been exposed to rain or water. d. If the monitor does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore normal operation. e. If the monitor has been dropped or the cabinet has been damaged. f. When the monitor exhibits a distinct change in performance, this indicates a need for service. 17. When replacement parts are required be sure the service J technician has used replacement Ee parts specified by the manufacturer
= that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
{8. Upon completion of any service or repairs to this monitor, ask the service technician to perform routine safety checks to determine that the monitor is safe to operate. FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio or TV technician for help. fe complinnes cul vd te wes CANADIAN NOTICE This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. AVIS CANADIEN Cet appareil numrique de la Class B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. WICHTIGE INFORMATIONEN Bitte lesen Sie alle diese Informationen, bevor Sie das Gerat in Betrieb nehmen! Lesen Sie sich auBerdem die Bedienungsanleitung komplett und sorgfaltig durch, da nur in diesem Fall eine problemlose Inbetriebnahme erwartet werden kann.
* Achten Sie darauf, daB das Gerat nur in eine 230V Schuko-Steckdose eingesteckt wird.
* Die Steckdose sollte jederzeit frei zugdnglich sein um bei einem evtl. auftretenden Notfall das Gerat schnell vom Netz zu trennen. Achten Sie desweiteren darauf, daB die NetzanschluBleitung nicht mechanisch beansprucht oder sonstwie beschadigt wird. Offnen Sie das Gerat niemals! Im Inneren befinden sich Teile mit gefahrlicher Spannung. Bevor Sie das Gerat reinigen, ziehen Sie bitte den Netzstecker aus der Steckdose. Saubern Sie dann das Gerat mit einem feuchten (keinesfalls tropfnassen) Lappen. Die in diesem Gerat entstehende R6ntgenstrahlung ist ausreichend abgeschirmt (Ortsdosisleistung in 0.1m Abstand weniger als 1.0, Sv/h). Beschleunigungsspannung maximal 29kV. Stellen Sie das Gerat an einem ergonomisch giinstigen Ort auf und sorgen Sie dafiir, da8 der Monitor mit nach GS-VW-SG7 gepriifter Peripherie betrieben wird, da nur unter diesen Umstanden ein optimaler ergonomischer Betrieb des Gerates sichergestellt ist. Falls Sie dennoch Fragen haben, auf die die Bedienungsanleitung keine hinreichende Antwort geben kann, so kontaktieren Sie bitte den nachsten Fachhandler. Maschinenlarminformationsverordnung 3. GSGV, 18.01 1991:
Der arbeitsplatzbezogene Schalldruckpegel betragt 70 dB (A) oder wenigergema8 ISO 7779.
\Z DAEWOO DECLARATION OF CONFORMITY We, Manufacturer / Importer DAEWOO ELECTRONICS CoO., Ltd 541, 5-Ga, Namdaemoon-Ro, Jung-Gu Seoul, Korea declare under our sole responsibility that the product, Color Display monitor 719B to which this declaration relates is in conformity with the following standard(s) or other normative document(s) Safety : EN60950/1992/A1:1993/A2:1993 A3:1995/A4:1997 EMC : EN 55022/8.1994, EN 50082-1/1992 EN 60555 Part 2, 3/1987 following the provisions of 89/336 EEC-EMC Directive and the provisions of 73/23 EEC-Low Voltage Directive. Handed over by : S.Lee, Managing Director. Display Business Division June , 2000 Seoul Signature: G S.Lee, Managing Director. Display Business Division. DAEWOO ELECTRONICS Co., Ltd Emission Characteristics Tested by SEMKO A sample of this type has been tested and has shown compliance with the guidelines in the swedish document MPR II. This product is also designed for IT power system with phase to phase voltage of 230V. The power cord is used as a main disconnect device. Disconnect the power cord before servicing. The outlet must be installed near the monitor and must be easily accessible. As an ENERGY STAR Partner, Daewoo Electronics Co., Ltd. has determined that this product meets the Energy Star guidelines for energy efficiency. The appliance is not intended for use by young children or infirm persons without supervision ;
Young children should be supervised to ensure that they do not play with the appliance. PRODUCT FEATURES The convenient and user-friendly on-screen display allows for easy and accurate adjustments of horizontal and vertical screen size and position, geometry, and screen color. The monitor supports a safe working environment in strict compliance with the MPR II standard for low emissions
(TCO Optional).
* The monitor complies with the VESA Display Data Channel
(DDC) specification for Plug and Play compatibility. Advanced microcircuitry makes setup and configuration fast and effortless. The monitor features Advanced Color Controls for fine-tuning to meet your own personal tastes or application requirements. Use the on-screen controls to adjust the color temperature, RGB gain value for the best possible screen color and intensity. Press the menu button and activate the Self-Diagnosis menu to determine whether your monitor is functioning normally, not receiving a signal or is receiving a signal that is out of scanning range.
* Activate the higher refresh rates of the monitor to stabilize the screen and eliminate the annoying flicker that contributes to eye-strain and headaches. The borderless full-screen display capability works under all graphic modes and provides a larger viewing area than conventional monitors, giving you a better picture with more workspace. English - 2 SETUP INSTALLING THE TILT/SWIVEL STAND 1. Ensure that the power is off to the monitor. 2. Set the monitor face down with the underside facing you. Please be careful not to scratch the monitor screen. 3. Align the four hooks on the stand with the guide holes on the bottom chassis of the monitor. 4. Insert the hooks into the guide holes. 5. Slide the tilt/swivel stand toward the front of the monitor until the latch locks in position. 6. Turn the monitor and the stand upright. If you want to remove the tilt/swivel stand on the monitor, press the latch and pull the tilt/swivel stand toward the back of the monitor. Lift the stand to separate. English-3 CONNECTING THE SIGNAL CABLE AND POWER CORD 1. Turn off the computer and monitor. 2. Connect the 15 pin D-sub connector to the output port of the video card in your computer. 3. Tighten the screws of the connector. 4. Plug the power cord into the AC receptacle located on the back of the monitor. 5. Plug the other end of the power cord into the AC outlet. English - 4 POWER MANAGEMENT SYSTEM If you use the monitor with a computer that complies with the power-saving program, you can set the monitor to go blank when the system has remained unused for a period of time. To specify the period or to disable this feature, set the system timeout field of the computers system setup program or use special software for power-saving. See the computer users manual for the details of using the system setup. While the monitor is in power-saving mode (blank screen), it consumes less power than when it is in its normal state. The color of the power LED will indicate the state. To restore the screen image, press any key of your keyboard or move your mouse. If the signal cable is connected loosely or disconnected, the power-saving feature will not operate. DISPLAY DATA CHANNEL FOR PLUG AND PLAY If you use the monitor with a computer that complies with DDC1/2B/CI of VESA, the host video card automatically configures itself without your intervention in a way that best fits the attached monitor. The Display Data Channel(DDC) allows the monitor to inform the host system about configuration information for optimum use of the monitor. Use of the video card utility is not required to match the resolutions and refresh rates of the monitor and video card. English-5 OPERATION & ADJUSTMENT Control Panel Vv BRIGHTNESS & MENU << CONTRAST P oOo Move cursor to the right window on the OSD
> . window.
Increase the value of any selected function.
< Move cursor to the left window on the OSD window. OEGAUSS Launch OSD(On-Screen Display) MENU window. Move cursor to the high window on the OSD window. Increase the value of V.size or V.center.
@ When you choose the icon Ei on the OSD window, you can exit the OSD screen. Vv Move cursor to the low window on the OSD window. Oo Decrease the value of V.size or V.center. Hot Key BRIGHTNESS CONTRAST English - 6 English-7 OSD Functions ICON CONTROL FUNCTION I PINCUSHION Adjust the left and right margins for more convex or more concave margins.
[.\ TRaPezoiw Adjust the trapezoid of the screen by moving the lines inward or outward.
| PARALLELOGRAM Adjust the parallelogram when the screen is leaning left or right. Adjust the side balance when the sides of L) PIN BALANCE ine screen are bowed towards left or right. Adjust the rotation when the screen is CI ROTATION tilted left or right (Optional). Adjust the pin comer top when the top U T. PIN CORNER sides of the screen are bowed. Adjust the pin corner bottom when the Oi B. PIN CORNER bottom sides of the screen are bowed. H. CENTER & Adjust the position of the display horizontally (left or right) and vertically V. CENTER (up or down). Choose different preset color
&x COLOR TEMP temperatures or set your own customized color parameters. O RED GAIN Adjust the red gain. OQ GREEN GAIN Adjust the green gain.
@) BLUE GAIN Adjust the blue gain. rez OH. SIZE & Adjust the width (horizontal size) and the He V. SIZE height (vertical size) of the display. English - 8 ICON CONTROL FUNCTION Degaussing keeps the monitor free from f DEGAUSS unwanted magnetism that can result in color impurity. ry Display horizontal & vertical frequency GB status and polarity. Adjust the horizontal picture moire
[222 H. MOIRE cancellation. Adjust the vertical picture moire
[=] V. MOIRE cancellation. LANGUAGE Select language for OSD (5 languages).
& RECALL Reset the screen to the Factory Preset Display Settings. Self Diagnosis When the monitor doesnt display, if you press any key, Self Diagnosis screen is displayed. Self Diagnosis function checks if the status of the monitor is No Signal or Out of range. HO SIGHAL No Signal screen is displayed when the D-Sub signal connector is not connected or the status of the monitor is on DPMS mode. OUT OF RANGE Out of Range screen is displayed when the applied frequency is under or over normal range. Vi Bo-t6orz @ Normal range PC DISPLAY SETTINGS H: 30-70 KHz CORRECT? V :50- 160 Hz English-9 SPECIFICATIONS CDT Size [iink CSC~~SCSCSY Diagonal visibleimage area [162inch
[| Vertical | 50-160Hz
| PowerSaving = ==s|_ EPA, VESA DPMS, Nutek Compliant Power Source 100-240 Vac, 50/60Hz (Free Voltage) Dimension-W x H x D 410 x 402 x 425mm
(set with stand) 32.0/14.5 Weight-unpacked (Ibs/Kg) Operating Temperature 10 ~ 40C /50 ~ 104F
%* The specifications are subject to change without notice. FACTORY PRESET TIMINGS Non-interlaced Non-interlaced Non-interlaced VESA 46K. 800 x VESA SVGA 85 800 x VESA 60K 1024 x 768 60.0 75 Non-interlaced Non-interlaced Non-interlaced VESA 1024/85 1024 x 768 68.7 85 Non-interlaced VESA 1280/60 1280 xX 1024 L 64.0 60 Non-interlaced English - 10 TROUBLESHOOTING Symptom No picture. POWER LED is not lit. Image is unstable. Image is not centered, too small or too large. Picture bounces or a wave pattern is present in the picture. Color looks blotchy. Picture is blurred. Edges of available area on the screen are not straight. Check if power switch and computer power switch are in the on position. 4 Check if the signal cable is correctly connected to the video card. 4 Check if the pins of D subconnector are not bent. 4 Check if the computer is in the power- saving mode. Check if power switch is in the on position. 4 Check if the power cord is correctly connected. Check if the signal cable is suitable to the video card. Adjust H&V Size or H&V Position to get the proper image. Keep the devices that may cause electrical interference away from the monitor. 4 See the FCC information at the front cover of the manual. Operate Degauss once. Adjust Contrast and Brightness. 4 Operate Degauss once. Adjust Geometry Control (Pincushion, Trapezoid..). English-11 APPENDIX DESCRIPTION FOR D-SUB CONNECTOR OWI ANAHWN art poem heme pe WN 15 Blue GND GND GND-Red GND-Green GND-Blue
+5Vdc GND-H.Sync GND-V.Sync Bi-directional Data(SDA) Horizontal Sync Vertical Sync(VCLK) L Data Clock(SCL)
%* GND=Ground