all | frequencies |
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 4 |
|
User Manual | Users Manual | 1.67 MiB | October 06 2004 / September 06 2004 | |||
1 2 3 4 |
|
User Manual 1of 2 | Users Manual | 1018.27 KiB | ||||
1 2 3 4 |
|
User Manual 2 of 2 | Users Manual | 945.08 KiB | ||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | External Photos | |||||||
1 2 3 4 | Internal Photos | |||||||
1 2 3 4 | Test Setup Photos | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Cover Letter(s) | October 06 2004 / September 06 2004 | ||||||
1 2 3 4 | ID Label/Location Info | October 06 2004 / September 06 2004 | ||||||
1 2 3 4 | Operational Description | October 06 2004 / September 06 2004 | ||||||
1 2 3 4 | Parts List/Tune Up Info | October 06 2004 / September 06 2004 | ||||||
1 2 3 4 | Test Setup Photos | October 06 2004 / September 06 2004 | ||||||
1 2 3 4 | Test Report | October 06 2004 / September 06 2004 | ||||||
1 2 3 4 | Block Diagram | |||||||
1 2 3 4 | ID Label/Location Info | |||||||
1 2 3 4 | ID Label/Location Info | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Report |
1 2 3 4 | User Manual | Users Manual | 1.67 MiB | October 06 2004 / September 06 2004 |
VCR Users Guide Changing Entertainment. Again. DV-T7D5N-QJ 15708270 (VR661HF)(E) 01 CVR 1 2/7/01, 4:55 PM Important Information WARNING To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. This symbol indicates
"dangerous voltage" inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product. Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert. Attention: Pour viter les chocs lectriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusq au fond. Refer to the identification/rating label located on the back panel of your product for its proper operating voltage. FCC Regulations state that unauthorized changes or modifications to this equipment may void the users authority to operate it. Cable TV Installer: This reminder is provided to call your attention to Article 820-40 of the National Electrical Code (Section 54 of the Canadian Electrical Code, Part 1) which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical. Product Registration Please fill out the product registration card and return it immediately. Returning the card allows us to contact you if needed. Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model numbers in case you need them. The numbers are located on the back of the VCR. DV-T7D5N-QJ Model No Serial No. _______________________________________________________________________________________ Purchase Date:___________________________________________________________________________________ Dealer/Address/Phone: ___________________________________________________________________________ i 15708270 (VR661HF)(E) 01 CVR 2 2/7/01, 4:55 PM Introduction Key Features Overview Your VCR is equipped with features that will add to your recording and viewing experience. The following information summarizes a few of these features. Chapter 4 provides more information about the rest of the VCRs features and how to use them. Introduction VCR Plus+ SILVER System The VCR Plus+ system allows for simple timer recording programming by using a single PlusCode programming number found in most TV program listings. The VCR Plus+ SILVER system simplifies timer recordings by automatically setting up and updating the VCRs clock and channel list for you. Requirements: Make sure the VCR Plus+ SILVER system is active, and that Auto Channel Search and time set features are correct. This feature uses patented technology that detects and marks most commercials on your recordings. The VCR determines where commercials are located, marks the beginnings and ends of detected commercial segments, then easily skips over them during playback. This feature does not erase commercials from the tape. This feature helps locate the beginning of a purchased or rented movie as well as skip thorugh previews. You can go to the beginning of the movie, or, skip from one preview/long commercial to the next. Universal Back-Lit Remote Control Description: The VCRs remote control can operate most RCA, GE, and Proscan TVs with no additional steps. It can be programmed to operate many other brands of TVs. Back-lit buttons offer easier control in the dark. Requirements: Point the remote control at the active component and press the ONOFF button to see if it can be operated. ONOFF TV VCR REVERSE PLAY FORWARD RECORD STOP PAUSE INFO C HAN SEARCH L O V V O L MUTE CHA N GO BACK CLEAR MENU SPEED 1 4 7 IN PUT 2 5 8 0 3 6 9
VC R TV TRACKING F.ADV Rec Ch 36 Record Length 1:30 Press REC to set length Auto Clock Set Description: The VCR automatically looks for time and date information after most power outages as well as each time the machine is turned off. Using time information broadcast in TV signals (if available), the VCRs clock sets itself. Requirements: Start Auto Clock Set using the VCRs on-screen menus. VCR Plus+ and PlusCode are registered trademarks of the Gemstar Development Corporation. The VCR Plus+ system is manufactured under the license from Gemstar Development Corporation. COMMERCIAL ADVANCE and MOVIE ADVANCE are registered trademarks of SRT, Inc.; a Jerry Iggulden invention licensed in association with Arthur D. Little Enterprises. 1 15708270 (VR661HF)(E) 02 Intro 1 2/7/01, 4:55 PM Introduction TIMER RECORDINGS 1 Create a New Program 2 Review Existing Progs. 3 Use VCR Plus+ Code 0 Exit Express Recording (XPR) Description: XPR quickly records the remaining portion of a program already in progress. XPR is a great way to capture the end of a sporting event that has run into overtime or a live broadcast that runs long. Requirements: Repeatedly press the Record button on the VCR front panel or remote control to set the desired duration of time to record. Pro-Tect Plus Locking Description: Locks the VCR so that buttons on the front panel and remote control wont operate the VCR. This feature protects timer programs from frustrating accidents such as being left on at the time of recording. Requirements: Lock the VCR by pressing and holding the POWER button on the remote control for six seconds. The front panel display will blink for several seconds. The VCR unlocks by pressing and holding the POWER button on the remote control, again for six seconds. The front panel display will blink again and release the lock on the system. Front Audio/Video Input Jacks Description: The VCR has Audio/Video (A/V) input jacks on both the front and rear of the unit (there are output jacks on the rear panel only). The front A/V jacks make it easy to plug in an external A/V device, such as a camcorder. Requirements: Make sure that all A/V connections are snug. To see a connected devices image, turn the VCR to its Video Line Input by pressing the remote controls INPUT button. Hi-Fi Quality Sound Description: When using the VCRs A/V jacks, you can feed stereo quality sound from your VCR to your TV or stereo. Stereo quality sound allows for two separate channels of sound (Left and Right) to be heard. Requirements: Using A/V jacks and cables to connect the VCR to the TV or stereo (see page 58 for an advanced connection setup diagram). SQPB S-VHS Quasi Playback Description: Your VCR will be able to play back tapes recorded in S-VHS or S-VHS-ET mode (in VHS quality). Requirements: Insert a tape recorded in S-VHS or S-VHS-ET mode and pressing the PLAY button on the remote control or PLAYPAUSE on the VCR. 2 15708270 (VR661HF)(E) 02 Intro 2 2/7/01, 4:55 PM Table of Contents Product Registration ............................................................................................................. i Introduction ............................................................................................................................ 1 Key Features Overview ......................................................................................................... 1 Connections & Setup ........................................................................................................... 5 Things to Consider Before Connecting Components .......................................................... 6 Cable Considerations ............................................................................................................ 6 Choose Your Connection ...................................................................................................... 7 Using the RF Coaxial Cable to Connect the VCR to a TV .............................................. 7 TV + VCR .......................................................................................................................... 8 TV + VCR + Satellite Receiver ......................................................................................... 9 TV + VCR + Cable Box ................................................................................................... 10 Set the VCRs CH 3/4 Switch ................................................................................................ 11 Plug in the VCR .................................................................................................................... 11 Put Batteries in the Remote Control .................................................................................. 11 Turn on the TV and VCR...................................................................................................... 11 Tune the TV.......................................................................................................................... 11 Using the Remote Control to Navigate On-Screen Menus ............................................... 12 Complete the QuickSet Guide ...................................................................................... 12 Accessing Menus ........................................................................................................... 12 VCR Basics ............................................................................................................................ 13 Playing a Tape ............................................................................................................... 13 Automatic Rewind ........................................................................................................ 13 Tape Eject ...................................................................................................................... 13 Recording ............................................................................................................................. 13 Check the Safety Tab .................................................................................................... 13 Using the VCRs Menu System ....................................................................................... 15 Using On-Screen Menus to Set Up Features ...................................................................... 16 Language ....................................................................................................................... 16 Cable Box Setup ............................................................................................................ 16 VCR Channels List.......................................................................................................... 17 Auto Channel Searching ....................................................................................... 17 Changing the Signal Type ..................................................................................... 18 Adding or Removing Channels ............................................................................. 18 Time and Date ............................................................................................................... 19 Auto Clock Set Feature.......................................................................................... 19 To Turn Auto Clock Set ON .............................................................................. 19 Setting the Time Zone ..................................................................................... 19 Setting Daylight-Saving Time .......................................................................... 20 Setting Time and Date Manually .......................................................................... 20 Additional Set Up Features in the Preferences Menu ....................................................... 21 Remote VCR1/VCR2 Option .......................................................................................... 21 Auto Play ....................................................................................................................... 21 Auto TV/VCR .................................................................................................................. 22 EnergySaver................................................................................................................... 22 Front Panel Brightness (VCR Display) .......................................................................... 22 Tape Speed .................................................................................................................... 23 Set Auto Repeat ............................................................................................................ 23 15708270 (VR661HF)(E) 03 ToC 3 2/7/01, 4:55 PM 3 Table of Contents Using the Remote Control ............................................................................................... 25 Remote Control Buttons ..................................................................................................... 26 Component Buttons ..................................................................................................... 26 VCR Function Buttons ................................................................................................... 26 TV Function Buttons ..................................................................................................... 27 Using the INPUT Button ........................................................................................ 28 Operating a TV with the VCRs Remote Control ............................................................... 28 Do You Need to Program the Remote? ....................................................................... 28 Using the VCRs Features .................................................................................................. 31 Recording Features ............................................................................................................. 32 Express Recording (XPR) ............................................................................................... 32 Timer Recording ............................................................................................................ 33 Stopping a Timer Recording ................................................................................. 33 Reviewing and Clearing Programs ....................................................................... 33 VCR Plus+ SILVER System .............................................................................................. 34 Turning ON or OFF the Auto VCR Plus+ download ............................................. 34 Mapping VCR Plus+ Channels Manually .............................................................. 35 Recording Broadcast Stereo TV or SAP (Second Audio Program) ...................... 38 Copying and Editing Tapes Using Two VCRs ............................................................... 38 Picture Search Options ........................................................................................................ 39 Forward and Reverse Search ........................................................................................ 39 Slow Motion .................................................................................................................. 39 Frame Advance ............................................................................................................. 39 Index Search .................................................................................................................. 40 Go-To Search ................................................................................................................. 40 Commercial Advance .......................................................................................................... 41 Movie Advance .................................................................................................................... 43 Pro-Tect Plus Locking Feature ......................................................................................... 44 Tracking................................................................................................................................ 44 Time Counter ....................................................................................................................... 44 On-Screen Displays .............................................................................................................. 45 Audio Set-Up Features ........................................................................................................ 46 Tape Playback ...................................................................................................................... 46 Other Information .............................................................................................................. 47 Troubleshooting Tips ........................................................................................................... 48 Questions and Answers About COMMERCIAL ADVANCE ................................................. 51 Front Panel .......................................................................................................................... 52 Display Panel ....................................................................................................................... 53 Back Panel ............................................................................................................................ 54 Specifications ....................................................................................................................... 55 Cleaning the VCR ................................................................................................................ 55 RCA VCR Limited Warranty................................................................................................. 56 Finding the TVs Video Line Input ...................................................................................... 57 Advanced Connection ......................................................................................................... 58 TV + VCR + Satellite Receiver ....................................................................................... 58 Glossary ................................................................................................................................ 59 Index .................................................................................................................................... 60 4 15708270 (VR661HF)(E) 03 ToC 4 2/7/01, 4:55 PM Chapter 1 Connections & Setup Chapter Overview:
Things to Consider Before Connecting Choosing Your Connection Making Connections Navigating On-Screen Menus Completing the QuickSet Guide Basic Recording Changing Entertainment. Again. 15708270 (VR661HF)(E) 04 Setup 5 2/7/01, 4:55 PM 5 Connections & Setup Things to Consider Before Connecting Components Protect Components From Power Surges Connect all components before plugging any power cords into the wall outlet. Always turn off the TV and other components before you connect or disconnect any cables. Position Cables to Avoid Audio Hum or Interference Insert all cable plugs firmly into their jacks. Place any Audio/Video (A/V) cables to the side(s) of the TVs back panel instead of straight down the back after connecting components. Try not to coil any twin-lead cables and keep them away from all A/V cables as much as possible. Make sure all antennas and cables are properly grounded. Refer to the Safety Tips sheet packed with your unit for detailed information. Protect Components From Overheating Never block ventilation slots in any component. Arrange the components so that air can circulate freely. Do not stack components. Allow adequate ventilation when placing components in a stand. Place an amplifier or satellite receiver on the top shelf of a stand so heated air rising from it will not flow around other components. Cable Considerations The RF coaxial cable supplied with your VCR carries both sound and picture information. This is the cable used in all connection diagrams illustrated in this chapter. If your TV has A/V input jacks, you should use A/V cables (not supplied) to connect the VCR to the TV. A/V cables provide better picture and sound quality than an RF coaxial cable. If you would like to hook up your VCR using A/V cables, refer to the Advanced Connection information on page 58 in the Other Information chapter of the manual. 6 Chapter 1 15708270 (VR661HF)(E) 04 Setup 6 2/7/01, 4:55 PM RF Coaxial Cable Connections & Setup Using the RF Coaxial Cable to Connect the VCR to a TV This graphic shows the RF coaxial cable supplied with your VCR. This will be the cable used for the basic connections represented in this chapter. Notes: To hear stereo sound, you will need to purchase Audio/Video (A/V) cables (not provided) and connect the VCR to the TV. A/V jacks and cables also provide a superior image and sound quality. For details about using this advanced setup, see the instructions on page 58. Using A/V jacks to connect the VCR to the TV requires tuning to the TVs Video Line Input to see the VCRs picture. For more information about finding your TVs Video Line Input, see page 57. If you prefer, we can provide you with the name of an Authorized Service Representative who will visit your home for a fee to install your electronic entertainment system and to instruct you in its operation. For details about this service, call 1-888-206-3359. Choose Your Connection There are several ways to hook up your VCR depending on the components connected. Please use the following chart to determine which connection is best for you and proceed to the appropriate page. Components Connection Title Go To V T V V T T V C R V C R V C R TV + VCR page 8 TV + VCR +
Satellite Receiver page 9 TV + VCR +
Cable Box page 10 a t e llit e S x o b l e B a C Chapter 1 7 15708270 (VR661HF)(E) 04 Setup 7 2/7/01, 4:55 PM Connections & Setup TV (back panel) VIDEO AUDIO R L / MONO V T V C R VCR IN OUT L S-VIDEO CABLE/
ANTENNA 1 AUDIO ANT. IN R L OUT IN VIDEO CH. 3 4 RF OUT 2 From Cable or Antenna Need Some Help?
If you prefer, we can provide you with the name of an Authorized Service Representative who will visit your home for a fee to install your electronic entertainment system and to instruct you in its operation. For details about this service, call 1-888-206-3359. TV + VCR Note: Your television back panel may not look exactly like the model shown here. 1. Connect the VCR to the TV Connect one end of the supplied RF coaxial cable to the RF OUT jack on the back of the VCR and the other end to the TVs Antenna IN jack. 2. Connect the antenna/cable feed to the VCR Connect the cable or antenna RF coaxial cable to the ANT. IN jack on your VCR. Note: Flip the CH 3/4 switch on the back of the VCR to the channel that is not used in your area. This will be the channel that the TV must be tuned to in order to see the VCRs picture. Go To Page 11 8 Chapter 1 15708270 (VR661HF)(E) 04 Setup 8 2/7/01, 4:55 PM Connections & Setup TV VCR VIDEO AUDIO R L / MONO IN OUT L S-VIDEO CABLE/
ANTENNA 1 AUDIO ANT. IN R L OUT IN VIDEO CH. 3 4 RF OUT SATELLITE RECEIVER 2 OUT VIDEO R L S-VIDEO IN FROM ANT OUT TO TV CH3 CH4 SATELLITE IN 3 From Cable or TV Antenna 4 From Satellite V T V C R a t e llit e S Need Some Help?
If you prefer, we can provide you with the name of an Authorized Service Representative who will visit your home for a fee to install your electronic entertainment system and to instruct you in its operation. For details about this service, call 1-888-206-3359. Chapter 1 TV + VCR + Satellite Receiver Note: Your television and/or satellite receiver back panels may not look exactly like the models shown here. 1. Connect the VCR to the TV Connect one end of the supplied RF coaxial cable to the RF OUT jack on the back of the VCR and the other end to the TVs Antenna input jack. 2. Connect satellite receiver to the VCR Connect a second RF coaxial cable (not included) to the antenna output jack on the satellite receiver and to the ANT. IN jack on the VCR. 3. Connect the antenna to your satellite receiver If necessary, connect an antenna or cable box RF coaxial cable (not included) to the antenna input jack on the satellite receiver. 4. Connect the satellite feed to the satellite receiver Connect the satellite receivers RF coaxial cable feed (not included) to the satellite input jack on the satellite receiver. Go To Page 11 9 15708270 (VR661HF)(E) 04 Setup 9 2/7/01, 4:55 PM Connections & Setup TV VCR VIDEO AUDIO R L / MONO IN OUT L S-VIDEO CABLE/
ANTENNA 1 V T V C R CABLE BOX x o b l e B a C AUDIO ANT. IN R L OUT IN VIDEO CH. 3 4 RF OUT 2 S-VIDEO IN FROM ANT OUT TO TV CH3 CH4 3 From Cable Feed Need Some Help?
If you prefer, we can provide you with the name of an Authorized Service Representative who will visit your home for a fee to install your electronic entertainment system and to instruct you in its operation. For details about this service, call 1-888-206-3359. 10 TV + VCR + Cable Box Note: Your television and/or cable box back panels may not look exactly like the models shown here. 1. Connect the VCR to the TV Connect one end of the supplied RF coaxial cable to the RF OUT jack on the back of the VCR and the other end to the TVs Antenna input jack. 2. Connect the cable box to the VCR Connect one end of a second RF coaxial cable (not included) to the cable boxs antenna output jack and the other end to the ANT. IN jack on the VCR. 3. Connect the cable feed to your cable box Connect the RF coaxial cable feed (not included) to the antenna input jack on the cable box. Go To Page 11 Chapter 1 15708270 (VR661HF)(E) 04 Setup 10 2/7/01, 4:55 PM Connections & Setup Set the VCRs CH 3/4 Switch The CH 3/4 switch on back of the VCR determines what channel the TV must be tuned to see the VCRs image. Choose whichever channel is not used locally in your area. Note: If you connected components using A/V jacks and cables, the VCRs signal must be viewed using the TVs Video Line Input. To find the Video Line Input, refer to the manual that came with the TV or see How to Find Your TVs Video Line Input on page 57 in the Other Information section of this manual. Plug in the VCR Your VCRs power cord has a plastic band strung through the blades. Remove the plastic band before plugging the cord into the power outlet. To remove the band, cut with a pair of scissors and pull it free of the blades. Once the plastic is removed, match the wide blade of the power cord to the wide slot in the AC outlet. Be sure to insert the plug completely. Put Batteries in the Remote Control 1. Remove the battery compartment cover on the remote control. 2. Insert new batteries matching the polarities (+ and ) on the batteries with the diagram in the battery compartment. 3. Put the battery compartment cover back on the remote. Turn on the TV and VCR Turn on the TV and press the VCR button on the remote control to turn it on. Note: If you have an RCA, GE, or Proscan TV, your VCRs remote control may be able to operate it without being programmed. Press the TV button on the remote control and then the ONOFF button. If neither one turns on the TV, see Using the Remote Control starting on page 25 for details about programming the remote control to operate other brands of TVs. Tune the TV Tune the TV to the VCR viewing channel. The VCR viewing channel is channel 3, 4, or the TVs video line input. If you connect your VCR using RF coaxial cable only, turn the TV to channel 3 or 4 (whichever was set on the CH 3/4 switch). If you connected the VCR using A/V jacks and cables, select the TVs video line input. For more information see How to Find the TVs Video Line Input on page 57 in the Other Information section of this manual. Chapter 1 11 15708270 (VR661HF)(E) 04 Setup 11 2/7/01, 4:55 PM Connections & Setup Using the Remote Control to Navigate On-Screen Menus The technical term is Navigation how you move through the on-screen menus. The theory is the same for all the menu screens; use the corresponding number button on the remote control select it. To choose an on-screen item, press the remote controls corresponding number button. Note: Selecting a menu item can take you to another menu, activate a choice, or activate a data entry field (such as the hour field in the Set Time menu). Select a language. Seleccione un idioma. Choisissez une langue. 1 English 2 Espaol 3 Franais VCR MAIN MENU 1 VCR Plus+
2 Timer Recordings 3 Time 4 Channels 5 Setup 6 Preferences 7 Audio 8 Language 0 Exit All of the VCRs menus are accessed through the Main Menu. Press the remote controls MENU button to start. Complete the QuickSet Guide The menu system in your VCR allows you to customize your preferences as well as use all the VCRs features. To help you use the VCR as quickly as possible, there is an initial QuickSet Guide that walks you through several important setup steps at one time. The first time you turn on the VCR, you will be able to set up available channels, time and date information, and more. The first menu you will see asks which language you prefer to have the on-screen menus appear in. Note: With numbered menu choices, press the corresponding number button on the remote control to automatically select it. In the case of the language menu, press 1 for English, 2 for Espaol (Spanish), or 3 for Franais (French). The remaining menus throughout the setup will appear in the language chosen. Just follow the step-by-step procedures until the QuickSet Guide is complete. Accessing Menus The series of preferences that are set in the QuickSet Guide can also be handled individually using the VCRs on-screen menu system. There are other settings not covered in the initial setup that are also handled using the on-
screen menus. For example, if you decide to run the QuickSet Guide again, you can access the Setup menu by pressing the remote controls MENU button. Once the Main Menu is displayed, press the 5 button to choose Setup. From there, you can start the QuickSet Guide from the beginning. All on-screen menus are accessed the same way, starting in the Main Menu which is displayed by pressing the remote controls MENU button. Note: See chapter two, Using On-Screen Menus, for details about changing the VCRs individual settings. 12 Chapter 1 15708270 (VR661HF)(E) 04 Setup 12 2/7/01, 4:55 PM Connections & Setup VCR Basics Once your initial settings are complete, you can begin using your VCR. In order to begin, you must first understand some basic concepts. Playing a Tape 1. Tune the TV to your VCR viewing channel (03, 04, or the video line input). 2. Insert a tape in the VCR. If the Auto Play feature is set to ON, the tape automatically begins playback
(if the safety tab on the tape is removed). Press FWD or REV (FORWARD or REVERSE on the remote control) to Automatic Tracking The VCR has automatic tracking which adjusts the picture when playing back a tape recorded on another VCR. To adjust tracking manually, use the TRACKING -/+
buttons on the remote control. Safety Tab Chapter 1 cue the tape at the desired starting position. Press PLAY (if necessary) to begin tape play. Press PAUSE for stop action. Press TRACKING up or down (TRACKING + or on the remote control) to remove any streaks from the picture, if necessary. Press STOP to stop playback. Automatic Rewind The VCR automatically rewinds the tape if it reaches the end of the tape during playback. While rewinding, you can press the ONOFF button and the VCR will turn off after finishing. If the tape has no safety tab, it will be ejected. Tape Eject Press the EJECT button on the VCR when stopped to eject the tape. You can also press and hold the remote controls STOP button for three seconds. Recording To Capture Programming with Basic Recording Methods:
1. Set the tape speed by pressing the SPEED button on the remote control
(see Recording Speed on page 23 for information about recording speeds). 2. Press the RECORD button to begin recording. 3. Press the STOP button to halt recording. If you just want to pause the recording for a short time (like during a commercial), press PAUSE instead of STOP. Check the Safety Tab No matter which recording option you use, make sure there is a tape in the VCR with its safety tab in place. You cannot record on a tape with its safety tab removed. If the safety tab is removed and you want to record, simply cover the hole with adhesive tape. 13 15708270 (VR661HF)(E) 04 Setup 13 2/7/01, 4:55 PM This page left blank intentionally 15708270 (VR661HF)(E) 04 Setup 14 2/7/01, 4:55 PM Chapter 2 Using the VCRs Menu System Chapter Overview:
Using On-Screen Menus Cable Box Setup Setting Time and Date Setting VCR Preferences Changing Entertainment. Again. 15708270 (VR661HF)(E) 05 Menu 15 2/7/01, 4:55 PM 15 Using On-Screen Menus Using On-Screen Menus to Set Up Features You set up many of the VCRs features by using the menu system as discussed in the previous chapter. Each feature that appears in the QuickSet Guide is explained in this section as well as a few other features you should set up to get the most out of your VCR. Note: Not all the VCR screens are shown in this manual when explaining how to access features. Language Selecting your preferred language determines how the on-screen displays will appear. To change the language:
1. Press MENU to display the VCR MAIN MENU. 2. Press the 8 button to select LANGUAGE. 3. Select English, Spanish (Espaol), or French (Franais). LANGUAGE Select a language. 1 English 2 Espaol 3 Franais Press MENU to continue Is Something Missing?
These instructions will not show all of the step-by-step On-Screen Menus. Make sure to follow the instructions completely to get to the menus being discussed. Cable Box Setup This setup applies only when all channels are received through a cable box. In this case, the VCR will automatically enter the channel used to view cable box programming. Your VCR will use this channel for all future timer recordings. 1. Press MENU to display the VCR MAIN MENU. 2. Press 4 to display the CHANNELS menu. CHANNELS 3. Press 5 to display the CABLE BOX SETUP menu. 1 Auto Channel Search 2 Add/Remove Channels 3 Signal Type: CABLE 4 VCR Plus+ Setup 5 Cable Box Setup 6 SAT Setup 0 Exit 16 Chapter 2 15708270 (VR661HF)(E) 05 Menu 16 2/7/01, 4:56 PM CABLE BOX SETUP Do you use your cable box to receive ALL channels or only SOME channels?
1 ALL channels 2 Only SOME channels 3 Cancel setup CABLE BOX SETUP The VCR will now receive all signals from the cable box on channel 04. Press MENU to continue Using On-Screen Menus 4. Select one of the three choices. If ALL Channels is selected, enter the output channel of the cable box (usually 03 or 04), or if A/V jacks connect the VCR to the TV, press the INPUT button on the VCRs remote control. 5. Once you complete the setup, the VCR confirms that it will now receive all signals on the designated channel. VCR Channels List Your VCR may come with a list of channels preset at the factory. Even though it may come with such a list, you might want to add or delete certain channels. Note: If you use a cable box to view all channels, this step is not necessary. Auto Channel Searching Notes: Use Auto Channel Search to place all available channels in memory. If you ever change cable or antenna signals, you may need to run the Auto Channel Search feature again. 1. Press the MENU button to display the VCR MAIN MENU. 2. Press 4 to select CHANNELS. 3. Press 1 to select AUTO CHANNEL SEARCH. AUTO CHANNEL SEARCH 4. Select one of the three options:
What type of signal are you using?
1 Cable TV 2 Antenna 3>Detect Automatically 0 Cancel Cable TV searches for cable stations. Antenna searches for local broadcast stations. Detect Automatically decides which input to use for you. Note: With Detect Automatically, a strong cable or antenna signal in your area may cause channels to be detected inaccurately. If this should happen, manually select the input signal for the system you have. The VCR begins scanning for channels available in the area (taking about one-to-two minutes). When scanning is complete, the VCR tunes to the lowest channel available. After completing Auto Channel Search, pressing the remote controls CHAN + or - buttons should only select active channels. Chapter 2 17 15708270 (VR661HF)(E) 05 Menu 17 2/7/01, 4:56 PM Using On-Screen Menus CHANNELS 1 Auto Channel Search 2 Add/Remove Channels 3 Signal Type: CABLE 4 VCR Plus+ Setup 5 Cable Box Setup 6 SAT Setup 0 Exit ADD/REMOVE CHANNELS Channel 115 is presently ADDED Press CLEAR to remove Press MENU to exit Changing the Signal Type This feature is useful if your cable signal goes out; it allows you to switch to a regular antenna for alternate television reception. 1. Press the MENU button to display the VCR MAIN MENU. 2. Press the 4 button to choose CHANNELS. 3. Press 3 to choose between Signal Type: Cable and Antenna. When finished, press 0 to exit back to the Main Menu and 0 again to exit to normal viewing. Adding or Removing Channels You might want to add or remove channels after using Auto Channel Search, especially if there are weak signals or channels with content you dont care for. 1. Press the MENU button to display the VCR MAIN MENU. 2. Press 4 to choose CHANNELS. 3. Press 2 to choose ADD/REMOVE CHANNELS. To go to the channel you want to add or remove, use the remote controls CHANNEL + or buttons or enter a specific channel number using the number buttons. Once the desired channel is displayed, the on-screen menu will tell you if the channel is currently in the VCRs viewing list. Press the CLEAR button to remove a channel from the available channels list or press the INFO button to add it. 4. Press the MENU button to exit out of the menus. Note: To view active channels, use the remote controls CHANNEL + and -
buttons. You can also access channels not available in the active channel list by using the remote controls number buttons to enter the specific channel number. 18 Chapter 2 15708270 (VR661HF)(E) 05 Menu 18 2/7/01, 4:56 PM Using On-Screen Menus Time and Date Your VCR gives you two ways to set the time and date; manually or by using the Auto Clock Set feature. Using Auto Clock Set enables the time to be updated each time the VCR is turned off by using time and date information carried in certain broadcast signals. Auto Clock Set Feature The Auto Clock Set feature is set to ON by default at the factory. In the ON setting, the VCR looks for a channel carrying time data and updates the clock automatically. In order for Auto Clock Set to work properly though, certain steps must first be completed such as Auto Channel Search, setting the time zone, and setting the Daylight-Saving feature. Notes: Auto Clock Set is available only in limited areas. You must set available channels, time zone, and Daylight-Saving settings for Auto Clock Set to work. When using Auto Clock Set with a cable box, the VCR will not reset the clock after a power outage unless the cable box is tuned to the channel carrying time data. If the time does not automatically set after trying for ten minutes, manually set the time and date information using the TIME menu (see the next page for information on manually setting time and date information). To Turn Auto Clock Set ON Note: make sure that available channels, time zone, and Daylight-Saving features are set before turning on Auto Clock Set. 1. Press MENU to display the VCR MAIN MENU. 2. Press 3 to choose TIME. 3. Press the 2 button repeatedly to toggle between Auto Clock Set ON and OFF. Setting the Time Zone 1. Press MENU to display the VCR MAIN MENU. 2. Press 3 to choose TIME. 3. Press 3 to chose SET TIME ZONE. 4. Select your time zone by pressing the corresponding number button. If you select Automatic for your time zone, the VCR sets the clock using the first time information it finds. If the time set is not correct, select another time zone or set the time and date through the menu system. TIME 1 Set Time and Date 2 Auto Clock Set:
3 Set Time Zone 4 Set Daylight Saving ON Time Data was found on channel 20. 0 Exit SET TIME ZONE What is your Time Zone?
1 Eastern 2 Central 3 Mountain 4 Pacific 5 Alaska 6 Hawaii 7>Automatic Press MENU to continue Chapter 2 19 15708270 (VR661HF)(E) 05 Menu 19 2/7/01, 4:56 PM Using On-Screen Menus Setting Daylight-Saving Time 1. Press MENU to display the VCR MAIN MENU. 2. Press 3 to choose TIME. 3. Press 4 to choose SET DAYLIGHT SAVING. 4. Select the appropriate option. Notes: DST stands for DaylightSaving Time. If you choose Automatic for the time zone, the VCR sets the clock using any DST information broadcast in the channels signal. TIME 1 Set Time and Date 2 Auto Clock Set:
3 Set Time Zone 4 Set Daylight Saving ON Time Data was found on channel 20. 0 Exit SET DAYLIGHT SAVING Does your area observe Daylight Saving Time from April to October?
1 Yes, DST is observed 2 No 3 Automatic Press MENU to continue Displaying Time and Date Pressing the INFO button on the remote control or VCR displays the time and date on screen temporarily. Setting Time and Date Manually If Auto Clock Set was unsuccessful, set the time and date manually in the TIME menu. Auto Clock Set is automatically turned off when time and date information is set this way. 1. Press MENU to display the VCR MAIN MENU. 2. Press 3 to choose TIME. 3. Press 1 to choose SET TIME AND DATE. TIME 1 Set Time and Date 2 Auto Clock Set:
3 Set Time Zone 4 Set Daylight Saving ON Time Data was found on channel 20. 0 Exit SET TIME AND DATE 4. Enter the data using the number buttons. Press 0 before single-digit numbers and follow the on-screen directions to exit the menus. Time --:--
(hh:mm) Date --/--/--
Press MENU to cancel 20 Chapter 2 15708270 (VR661HF)(E) 05 Menu 20 2/7/01, 4:56 PM PREFERENCES 1 Remote Control: VCR1 2 Auto Play:
3 Auto TV/VCR:
4 EnergySaver:
5 Front Panel:
6 Tape Speed:
7 Set Auto Repeat 8 COMMERCIAL ADVANCE 0 Exit ON ON 2:00 AUTO SLP The PREFERENCES menu allows changes to be made to a variety of different VCR features. Using On-Screen Menus Additional Set Up Features in the Preferences Menu Note: The features described on the following pages are all accessed through the PREFERENCES menu. To Access the PREFERENCES menu:
1. Press MENU to display the VCR MAIN MENU. 2. Press 6 to select PREFERENCES. You are now ready to select an item from the PREFERENCES menu to set up. Remote VCR1/VCR2 Option Some universal remote controls have buttons labeled VCR1 and VCR2. These remotes can operate up to two VCRs. If you have a universal remote control with this ability, your RCA VCR can be controlled with either the VCR1 or VCR2 button. See the documentation that came with your universal remote control for details about programming it to operate your RCA VCR. In the PREFERENCES menu, press 1 to select the Remote Control feature. Then press the VCR2 button on your universal remote control to change the setting. Then, the VCR will respond to the universal remote controls VCR2 button. To change the remote control setting back to VCR1, display the PREFERENCES menu, press 1, and then press the VCR1 button on the universal remote control. Note: Remember you must press VCR1 or VCR2 on a universal remote control (not included) whichever is selected in the PREFERENCES menu before the remote control will operate the VCR. Auto Play With Auto Play turned ON (the factory default setting), the VCR automatically starts playback when you insert a tape with its safety tab removed. To Access Auto Play:
1. In the PREFERENCES menu, press 2 repeatedly to switch between Auto Play: ON and OFF. Select ON if you want a tape with its safety tab removed to start playing automatically when inserted. Select OFF if you do not want a tape with its safety tab removed to start playing automatically. Chapter 2 21 15708270 (VR661HF)(E) 05 Menu 21 2/7/01, 4:56 PM Using On-Screen Menus ON ON 2:00 AUTO SLP PREFERENCES 1 Remote Control: VCR1 2 Auto Play:
3 Auto TV/VCR:
4 EnergySaver:
5 Front Panel:
6 Tape Speed:
7 Set Auto Repeat 8 COMMERCIAL ADVANCE 0 Exit The PREFERENCES menu allows changes to be made to a variety of different VCR features. Auto TV/VCR To control whether the VCRs TV/VCR setting changes automatically to VCR-
viewing mode when turned on, use the Auto TV/VCR setting. To Access Auto TV/VCR:
In the PREFERENCES menu, press 3 repeatedly to toggle between Auto TV/VCR:
ON and OFF. Note: Pressing the TVVCR button on the remote control will switch between VCR and TV-viewing modes. When in VCR-viewing mode, VCR is displayed on the front panel. The VCR indicator turns off when in TV-
viewing mode. Select ON to switch VCR-viewing mode on automatically when the power is turned on. The VCR must be connected to the TV using the supplied RF coaxial cable. Select OFF to remain in the TV-viewing mode when the VCR is initially turned on. Leaving Auto TV/VCR off is useful if you use A/V cables to connect the VCR to the TV and you watch the VCRs picture using the TVs Video Line Input. This way, the antenna/cable signal will not be interrupted by the VCR. EnergySaver By default, the VCR automatically turns off after two hours of inactivity. This can be changed in the PREFERENCES menu by pressing the 4 button repeatedly to change the time delay or to disable the feature altogether. Select OFF and the VCR will stay on until you shut it off. Select 1:00, 2:00, or 3:00 and the VCR will turn off after one, two, or three hours of inactivity. Thirty seconds before automatically shutting off, the VCR displays an on-screen message reading, The VCR will turn off in 30 seconds. Press any key to cancel. Pressing any remote control or VCR front panel button will halt the countdown. If you use the VCRs tuner instead of your TV to view channels, you may want to turn off this feature. Front Panel Brightness (VCR Display) You can change the brightness level of the VCRs front panel display. In the PREFERENCES menu, press the 5 button repeatedly to toggle between options:
AUTO means the display brightens when the VCR is on and dims when the VCR is off. BRIGHT keeps the display bright whether the VCR is on or off. DIM keeps the display at a low brightness level whether the VCR is on or off. 22 Chapter 2 15708270 (VR661HF)(E) 05 Menu 22 2/7/01, 4:56 PM Recording Speeds SP (Standard Play) Gives the best quality recording, but fewer programs can be recorded on the tape. SLP (Super Long Play) Gives three times the recording time of tapes recorded in SP mode. Recording Times Cassette SP 2 Hr T-120 T-160 Using On-Screen Menus Tape Speed You can choose as the preferred recording tape speed either Standard Play (SP) or Super Long Play (SLP). The speed selected appears in the VCRs front display panel and in timer and VCR Plus+ system recording menus. To Select a Preferred Tape Speed:
In the PREFERENCES menu, press the 6 button repeatedly to switch between SP and SLP settings. Note: For an explanation of recording speeds, see the note to the left. SLP 6 Hr To Override the Preferred Tape Speed:
Press the SPEED button on the remote control. 2 Hr/40 Min 8 Hr Set the tape speed in the timer or VCR Plus+ system recording menus. AUTO REPEAT Set the length of time you want the tape to play in a repeating loop Loop from 0:00 to 2:--
(h:mm) Press CLEAR to turn off Press MENU to exit When you turn off the VCR, the tape speed reverts to the one selected as the default. Set Auto Repeat A tape can be set to play the same segment over and over in a repeating loop with the Set Auto Repeat feature. Set Auto Repeat uses the VCRs memory counter to determine the duration of the loop. In the PREFERENCES menu, press the 7 button to choose Set Auto Repeat. The SET AUTO REPEAT menu will ask for an ending time for the loop to be specified:
The CLEAR button will erase all three numbers entered and move the cursor back to the first position (hours). The Press CLEAR to turn off message will appear only after the first number has been entered into the end time. Auto Repeat is set back to -:-- by resetting the dialog box, ejecting a tape, powering off the VCR, power interruption, or by recording start. When a duration time has been set:
The VCR will automatically switch to rewind if the counter meets or goes past the set Auto Repeat duration. The VCR will automatically switch to playback during rewind if the counter equals or is less than 0:00. The Auto Repeat may be adjusted by setting the counter to 00:00. This can be done by pressing the CLEAR button while the tape counter is on screen or on the front panel display. The counter will not reset while rewinding in an Auto Repeat loop. Chapter 2 23 15708270 (VR661HF)(E) 05 Menu 23 2/7/01, 4:56 PM This page left blank intentionally 15708270 (VR661HF)(E) 05 Menu 24 2/7/01, 4:56 PM Chapter 3 Using the Remote Control Chapter Overview:
Buttons on the Remote Control Programming the Remote to Operate Other Components How To Use the Remote After Youve Programmed It Changing Entertainment. Again. 15708270 (VR661HF)(E) 06 Remote 25 2/7/01, 4:56 PM 25 Using the Remote Control ONOFF TV VCR REVERSE PLAY FORWARD RECORD STOP PAUSE INFO C HAN SEARCH L O V V O L MUTE CHA N GO BACK CLEAR MENU SPEED 1 4 7 IN PUT 2 5 8 0 3 6 9
VC R TV TRACKING F.ADV Remote Control Buttons The backlit remote has a light button (
this button to light the buttons on the remote. The remote buttons remain lit when they are pressed within a few seconds of each other. If a button is not pressed within approximately seven seconds, the light turns off to conserve battery power. The remote control is capable of controlling your VCR and many brands of televisions. If you have an RCA, GE, or Proscan TV, you may be able to control it without having to program the remote.
) that glows in the dark. Press Component Buttons ONOFF Turns off VCR when remote is set to control the VCR. Also turns some compatible components on and off. TV Turns on a compatible RCA, GE, or PROSCAN TV and sets the remote to control the TV. Also used with the ONOFF button to turn on a different brand of TV (if programmed) and sets the remote to control the TV. VCR Turns on a compatible RCA, GE, or PROSCAN VCR and sets the remote to control the VCR. VCR Function Buttons CHAN Up or Down Selects next higher or lower channel in the VCRs channel memory. CLEAR Resets time counter to 0:00:00. Allows you to change entries when setting the clock or a timer recording. F. ADV Lets you view one frame with each press of the button when tape is in pause. FORWARD Fast forwards the tape when the VCR is stopped. Searches forward through a tape during playback. Starts slow motion during play-pause and increases slow-motion speed. GO BACK Switches between two channels. Select one channel and then select another using the number buttons. Press GO BACK to switch between the two channels. In menu mode, press to go back to a previous menu. INFO Shows the status displays on the TV screen. INPUT Selects between the VCRs line input or tuner. Line input refers to the signal coming from the component connected to the AUDIO/
VIDEO IN jacks on the back (L1) or front (L2) of the VCR. MENU Brings up VCR MAIN MENU on the TV screen. Numbers (0 through 9) Select a channel up to 99 by pressing two numbers. Select a cable channel over 99 by pressing and holding 1 until 1 appears on the screen. Then press the other two numbers. 26 Chapter 3 15708270 (VR661HF)(E) 06 Remote 26 2/7/01, 4:56 PM Using the Remote Control PAUSE Pauses playback or recording. Press PAUSE a second time to return to playback or recording. PLAY Plays a tape. RECORD Starts VCR recording. Also used for Express recording. REVERSE Rewinds the tape when the VCR is stopped. Searches backward through a tape during playback. Starts slow motion during play-pause and decreases slow-
motion speed. SEARCH Displays INDEX and GO-TO Search menus on screen when the VCR is stopped. Advances the tape forward through 30 seconds of recorded material during playback. Each press advances the tape an additional 30 seconds (up to five minutes). This button also displays the MOVIE ADVANCE screen for prerecorded movies and starts COMMERCIAL ADVANCE skipping during playback. SPEED Selects a recording speed (SP or SLP). STOP Stops the current VCR function such as record, playback, rewind, or fast forward. TRACKING Up or Down Lets you manually reduce the streaks that may appear on the picture during play, slow motion, or pause. Reduces picture jitter during stop-
action playback. TVVCR Switches the picture signal so that it either comes from the VCR or cable/
antenna system. TV Function Buttons CHAN Up or Down Selects next higher or lower channel in the TVs channel memory. CLEAR Removes menus or status displays from the screen. GO BACK Switches between two channels. Select one channel and then select another using the number buttons. Press GO BACK to switch between the two channels. INFO Shows the TVs status displays on the TV screen. INPUT Selects between the TVs input channel or tuner. Press to see the VCR signal if you connected your VCR using the AUDIO/VIDEO jacks. MUTE Reduces volume to minimum level. Numbers (0 through 9) Select a channel up to 99 by pressing two numbers. Select a cable channel over 99 by pressing and holding 1 until 1 appears on the screen. Then press the other two numbers. ONOFF Turns a compatible TV off and on. VOL Up and Down Raises and lowers sound of TV. Chapter 3 27 15708270 (VR661HF)(E) 06 Remote 27 2/7/01, 4:56 PM Using the Remote Control Using the INPUT Button Use the INPUT button to toggle through the available Video Line Input sources (L1, L2, and regular broadcasting signals) and regular broadcast signals. Video Line Input allows you to view the image from a connected device (like a camcorder) through the VCR. 1. Press the remote controls VCR button to activate VCR-controlling mode. Make sure that the VCR is turned ON. 2. Press the remote controls INPUT button to tune to the Video Line Input source. L1 represents the rear A/V jacks and L2 represents the front A/V jacks. 3. Press the INPUT button again to tune back to the broadcast signal you were previously watching through the VCR. Operating a TV with the VCRs Remote Control The remote control that came with your VCR can be programmed to operate most brands of remote-controllable TVs and should already control most RCA, GE, and Proscan models without programming. Do You Need to Program the Remote?
To determine whether the remote control needs to be programmed to operate your TV, turn the TV on, point the remote control at it, then press the remote controls TV button (this puts the remote control into TV-operating mode and should automatically turn on most RCA, GE, and Proscan TVs). Press the remote controls ONOFF button to see if the TV responds to the command. If not, the remote control needs to be programmed to control that model TV. Programming the Remote Control To program your remote control, you must use the code list on the next page. Look up the brand name of your TV and the code(s) that brand uses. Notes: This remote control may not operate all models of the brands shown in the code list. Note the difference between the TV and VCR on-screen displays to know which component the remote control is operating. 1. Turn on the TV. 2. Find your TV brand and code number(s) in the code list. 3. Press and hold the TV button on the remote control. 4. Enter the code from the code list. 5. Release the TV button, then press the CHAN up or down button. If the TV responds to the remote controls command, the remote is programmed. 6. If the TV does not respond, repeat these steps using the next code listed for your TVs brand. 28 Chapter 3 15708270 (VR661HF)(E) 06 Remote 28 2/7/01, 4:56 PM Using the Remote Control TV Codes Akai ......................................... 03 AOC ..................................... 06,12 Candle ....................................... 06 Citizen ....................................... 06 Colortyme ................................. 06 Concerto ................................... 06 Curtis Mathes ....................... 01,06 Daewoo ............................... 06,12 Daytron ..................................... 06 Electrohome ........................ 06,12 Emerson .................................... 06 Envision .............................. 05, 06 Fisher .................................. 05, 08 GE .......................... 00, 01, 06, 11 Goldstar ............................... 06,12 Hallmark ................................... 06 Hitachi ................................. 06,14 Infinity ...................................... 04 J C Penney ....... 00, 01, 06, 09, 12 JBL ............................................. 04 Jensen ....................................... 06 JVC ...................................... 10, 11 Kawasho ............................. 03, 06 Kenwood ............................ 06, 12 Loewe ....................................... 04 Luxman ..................................... 06 LXI .................................04, 05, 07 Magnavox .....................04, 06, 12 Marantz ............................... 04, 06 MGA .................................... 06, 12 Mitsubishi ........................... 06, 12 MTC .......................................... 06 NAD ........................................... 07 NEC ............................................ 06 Panasonic ...................... 04, 08, 11 Philco ............................. 04, 06, 12 Philips ...................... 03, 04, 06, 12 Pioneer ...................................... 06 Portland ............................... 06, 12 Proscan ...................................... 01 Proton ........................................ 06 Quasar ....................................... 11 Radio Shack ................... 01, 05, 13 RCA ................................ 01, 06, 12 Realistic ...................................... 05 Sampo ........................................ 06 Samsung ........................ 06, 09, 12 Sanyo ................................... 05, 08 Sears ....... 01, 05, 06, 07, 08, 10, 12 Sharp ..................................... 06,13 Sony ........................................... 03 Soundesign ................................ 06 Sylvania .......................... 04, 06, 12 Technics ..................................... 11 Techwood .................................. 06 Teknika ...................................... 06 TMK ........................................... 06 Toshiba .................... 05, 07, 08, 09 Universal .................................... 00 Victor ......................................... 10 Wards ........... 00, 01, 04, 06, 12, 13 Yamaha ...................................... 12 Zenith ........................................ 02 Chapter 3 29 15708270 (VR661HF)(E) 06 Remote 29 2/7/01, 4:56 PM Using the Remote Control Operating the TV After you set up the remote control, see which buttons operate your TV:
1. Point the remote control at the TV, and press the TV button. If the TV does not turn on, press the TV button and then press the ON OFF button. 2. You may want to experiment to see which buttons operate your TV. Try pressing buttons, such as VOL and MUTE. See the button descriptions in this chapter for details about what each remote control button does. 30 Chapter 3 15708270 (VR661HF)(E) 06 Remote 30 2/7/01, 4:56 PM Chapter 4 Using the VCRs Features Chapter Overview:
Recording Express Recording (XPR) Timer Recordings Using the VCR Plus+ System Copying and Editing Tapes Changing Entertainment. Again. 15708270 (VR661HF)(E) 07 Ftrs 31 2/7/01, 4:56 PM 31 VCR Features Recording Features Your VCR provides many ways to capture programming:
1. Recording lets you press one button to record a program. 2. Express Recording (XPR) allows recording to start while a program is being watched. This feature automatically stops recording after a designated period of time. 3. Timer Recording program the VCR for a daily, weekly, or one-time recording which will automatically start and stop at the times you set. 4. Timer Recording with the VCR Plus+ System program the VCR by entering a PlusCode programming number found in most TV program listings. Express Recording (XPR) Use XPR to quickly record the remaining portion of a program being watched. XPR is a great way to capture the end of a sporting event that has run into overtime or a live broadcast that runs long. XPR works in 30-minute increments. You can capture the last 30, 60, 90, etc. minutes of programming (depending on tape length), up to four hours total. Rec Ch 36 Record Length 0:00 Rec Ch 36 Record Length 1:30 Press REC to set length To Activate XPR:
1. 2. If necessary, turn on the VCR and tune it to the channel with the desired programming. If necessary, insert a tape with its safety tab in place into the VCR. Make sure it is cued to record at the proper starting point. Note: To override the preferred tape speed setting, press the SPEED button on the remote control repeatedly to toggle between SP and SLP choices. 3. Press the RECORD button on the remote control or VCR front panel to start recording. Press REC to set length 4. Repeatedly press the RECORD button to set up the recording duration. Each press of the RECORD button adds 30 minutes of recording time. The VCR automatically turns off after recording for the set time. To stop an XPR recording, press and hold the STOP button on the remote control or VCR front panel for several seconds until STOP appears on the VCR on-screen display. 32 Chapter 4 15708270 (VR661HF)(E) 07 Ftrs 32 2/7/01, 4:56 PM TIMER RECORDINGS 1 Create a New Program 2 Review Existing Progs. 3 Use VCR Plus+ Code 0 ExitHow often should this program record?
1 One time 2 Daily (every day) 3 Weekdays (M-F) 4 Weekly (once per week) 0 Cancel Program 1 has been saved Remember to insert a recordable tape and turn the VCR off before the program start time. Press MENU to continue VCR Features Timer Recording You can program up to eight different broadcasts to be recorded. Notes In order for a timer recording to work:
The VCRs clock must be set correctly. Insert a tape with its safety tab in place and enough tape to record the program. If youve set up the VCR for a cable box for all channels, the output of your cable box appears in the channel item of the Timer Recording menu. PROGRAMS OVERLAP appears if two programs whose times overlap are entered. TIMER appears in the display when you turn off the VCR and a timer recording has been set. TIMER flashes if there is no tape in the VCR when a timer recording has been set and the unit is turned off. For a cable box or satellite receiver, turn it on and tune it to the channel you want to record before the recording is to begin. To Set Up to as Many as Eight Timer Recording Programs:
1. Press the MENU button to display the VCR MAIN MENU. 2. Press the 2 button to choose TIMER RECORDINGS. 3. Press the 1 button to choose Create a New Program. 4. Select how often you want the program to record. 5. Enter the data for the program with the number buttons. The data includes the channel number (press INPUT to select the Video Line Input if using A/V jacks to connect the VCR to the TV), and start and end times (including AM or PM). The start date is automatically entered based on the VCR clock. Both the recording date and speed can be changed. 6. Review the information to make sure it is correct. 7. Press the MENU button to save. Stopping a Timer Recording To stop or cancel a timer recording in progress (even an Express Recording):
Press and hold the STOP button for several seconds until STOP appears in the on-screen display. Program 1 (One time) Channel 104 Cable Start Time 12:00 AM End Time 01:30 AM Start Date 11/16/01 Fri Tape Speed SLP Press CLEAR to erase Press MENU for next prog Reviewing and Clearing Programs To review programs that you have already set up:
1. Press the MENU button to display the VCR Main Menu. 2. Press the 2 button to choose TIMER RECORDINGS. 3. Press the 2 button to choose Review Existing Progs. 4. Press CLEAR to erase or MENU to see the next saved timer recording program. Chapter 4 33 15708270 (VR661HF)(E) 07 Ftrs 33 2/7/01, 4:56 PM VCR Features VCR Plus+ SILVER System The VCR Plus+ SILVER system makes VCR set up easier by setting and updating the clock and channel list for you automatically. During the first-time QuickSet Guide setup, the VCR prompts you to enter your zip code. Soon after, the VCR clock will set itself and your VCR Plus+ system channel list will be input for you. Time, date, and VCR Plus+ system information are downloaded from participating TV stations over your antenna or cable system. Time and date information are updated each time the VCR is turned off (and after every power interruption). So, when your TV stations or cable company update their lineups, your VCR will get the most current channel list automatically, freeing you from having to manually change the channel list yourself. If your VCR Plus+ SILVER system fails to download the proper information for any reason, you can always manually map the channels. You can also turn off AUTO VCR Plus+ if you keep getting prompts about multiple cable services by pressing the 2 button in the VCR Plus+ SETUP menu. VCR PLUS+ SETUP Last automatic setup was unsuccessful. Would you like to:
1 Try again 2 Finish setup manually 3 Cancel the auto setup Turning ON or OFF the Auto VCR Plus+ download If the automatic VCR Plus+ download continuously fails for any reason, you will see the prompt to the left. If you decide to turn off Auto VCR Plus+ all together, you can do this by:
1. Press the MENU button on the remote control to access the VCRs MAIN MENU 2. Press 4 to access the CHANNELS menu. 3. Press 4 to access the VCR Plus+ Setup menu. 4. Pressing 1 will take you to a screen to manually map VCR Plus+ channels. Pressing 2 will toggle between Auto VCR Plus+: ON or OFF. Make sure this feature is turned off if you continually get fail to download prompts and map the channels manually. VCR PLUS+ SETUP 1 Set channel lists 2 Auto VCR Plus+:
ON VCR Plus+ data was not found. 0 Exit VCR Plus+ and PlusCode are registered trademarks of the Gemstar Development Corporation. The VCR Plus+ system is manufactured under the license from Gemstar Development Corporation. 34 Chapter 4 15708270 (VR661HF)(E) 07 Ftrs 34 2/7/01, 4:56 PM VCR Features Mapping VCR Plus+ Channels Manually Using the VCR Plus+ SILVER system can make taping timer recordings for cable or off-air antenna easier. If your VCR Plus+ SILVER system setup failed during the QuickSet, then you will need to map the channels for your local service manually. A worksheet and abbreviated codes for typical cable services in the U.S. and Canada are provided. 1. Press the MENU button to display the VCR MAIN MENU. 2. Press the 4 button to choose CHANNELS. 3. Press the 4 button to choose VCR Plus+ Setup. 4. Press 1 to display the Set Channel Lists menu. 5. Enter the data following the on-screen directions using your worksheet. VCR PLUS+ SETUP 1 Set channel lists 2 Auto VCR Plus+:
ON VCR Plus+ data was not found. 0 Exit VCR+ Channel My Channel 5 --
4 --
3 -> -> -> --
2 --
1 --
Use CH+/- to select Press 0-9 to change Press MENU to save VCR+ Channel My Channel 5 46 4 --
3 -> -> -> 23 2 --
1 --
Use CH+/- to select Press 0-9 to change Press MENU to save
(Screen shown is for an example only.) Chapter 4 35 15708270 (VR661HF)(E) 07 Ftrs 35 2/7/01, 4:56 PM VCR Features Two-Digit VCR Plus+ System Channel Numbers for Cable TV (USA List) 35 ................... American Movie Classics 39 ........................ Arts &-Entertainment 57 ......................... Black Entertainment 54 .................................................. Bravo 42 ......................... Cable News Network 45 ............................................. Cinemax 98 .......................................... Cinemax 2 37 ..................... The Discovery Channel 53 ..........................The Disney Channel 63 ..................Entertainment Television 34 ........................ESPN Sports Network 47 .......................... The Family Channel 33 .............................. Home Box Office 95 ........................... Home Box Office 2 96 ........................... Home Box Office 3 51 ..................... The Learning Channel 46 .............................................. Lifetime 58 ...........................The Movie Channel 48 ................................ Music Television 49 ......................The Nashville Network 38 ...................................... Nickelodeon 64 ........................... Nostalgia Television 99 ........................... Quality Value Cable 41 ........................................... Showtime 97 ........................................ Showtime 2 59 .................................. Sports Channel 52 ............... Turner Network Television 44 ..................................... USA-Network 62 ....................................... Video Hits 1 93 .............................. Viewers Choice 1 94 .............................. Viewers Choice 2 55 .................................... WGN Chicago 43 .................................... WTBS Atlanta 60 .............................. WWOR-New York Two-Digit VCR Plus+ System Channel Numbers for Cable TV (Canadian List) 67 .................. Allarcom Pay Television/
Superchannel 44 ........................ Arts & Entertainment 72 ........................ Cable News Network-
Headline News 61 ......................... Cable News Network 70 ............... Canadian Home Shopping Network 56 ..................................... Canal Famille 69 ......................... Cathay International Television Inc. 68 ................. Chinavision Canada Corp 60 ..................Country Music Television 63 ................................. Family Channel 62 ........................................ First Choice 96 ................................ First Choice Two 97 ............................ First Choice Three 99 ............................... First Choice Four 90 .......................... House of Commons 91 .......................... La Chaine Francaise 51 ..................... The Learning Channel 65 ............... MeteoMedia/The Weather Network 48 ......................... MuchMusic Network 55 .......................................MusiquePlus 52 ............................. Nashville Network 73 ................................ Newsworld/CBC 53 ......................... Le Reseau des Sports 43 .......................... The Sports Network 64 ....................................... Super Ecran 37 ....................................Super Ecran B 98 ................................... Super Ecran C 66 ............................... Telatino Network 46 .................................... TV5 Montreal 92 .............................. Viewers Choice 1 93 .............................. Viewers Choice 2 94 .............................. Viewers Choice 3 95 .............................. Viewers Choice 4 71 .......................... Vision TV: Canadas Faith Network 38 ...................... Youth TV, Canada Inc. Note: Refer to your local TV program listings for a complete VCR Plus+ channel list for your viewing area or contact your cable company. Using the list may save you some time. 36 Chapter 4 15708270 (VR661HF)(E) 07 Ftrs 36 2/7/01, 4:56 PM VCR Features VCR Plus+ System Worksheet Broadcast or Cable-TV Station Name HBO ESPN VCR Plus+ System Channel Number**
Channel Number You Receive the Station On*
33 34
*Check your local or cable listings for the channel number you receive this station on.
**Check your local listings for broadcast or VCR Plus+ channel number assigned. Chapter 4 37 15708270 (VR661HF)(E) 07 Ftrs 37 2/7/01, 4:56 PM VCR Features Recording Broadcast Stereo TV or SAP
(Second Audio Program) Some TV programs are broadcast with stereo audio or SAP (Second Audio Program). 1. Turn on the TV and tune it to the VCR viewing channel (either 03, 04, or the TVs Video 2. 3. Line Input). Insert a tape with its safety tab in place. If your VCR viewing channel is 3 or 4, make sure the VCR indicator appears in the front display. If not, press the TVVCR button on the remote control to turn it on. 4. Press the SPEED button on the remote control if you want to override the preferred Tape Speed setting. The tape speed indicator appears on the TV screen. 5. 6. Select the channel or Video Line Input to be recorded. Set the Reception: STEREO/MONO/SAP feature for the type of audio you want to record. 7. Press RECORD to start recording. 8. Press STOP when finished. CABLE BOX or ANTENNA IN OUT PLAYBACK VCR RECORDING VCR AUDIO IN OUT ANT. IN R L R L VIDEO AUDIO IN OUT VIDEO RF OUT CH 3 4 ANT. IN RF OUT CH 3 4 Copying and Editing Tapes Using Two VCRs Use one VCR as the playback VCR and the other as the recording VCR. 1. Turn on the TV and VCRs. 2. Tune the TV to the VCR viewing channel (either 03, 04, or the TVs Video Line Input). 3. If you connected your VCR using the ANT. IN and RF OUT jacks, tune the recording VCR to channel 3 or 4whichever is selected on the back of the playback VCR. If you have connected your VCR using the A/V jacks, press INPUT on the recording VCRs remote control to select the Video Line Input. Select L1 for the jacks on the back of the VCR or L2 for the jacks on the front. 4. Insert the tape you want to copy into the playback VCR. Insert a tape with its safety tab in place into the recording VCR. 5. Press PLAY on the playback VCR to begin playback. When you reach the point on the tape or program where you want to begin copying, press the PAUSE button. You may need to adjust the tracking. 6. Press the RECORD button, then press PAUSE on the recording VCR. TO TV 7. Press the PAUSE buttons on both VCRs at the same time to begin copying the tape. Caution:
8. To edit segments that you do not want to copy:
The unauthorized recording of satellite broadcasts, television programs, or other copyrighted materials may infringe the rights of others. Press PAUSE on recording VCR to pause copying. Locate the next segment you want to copy on the playback VCR by using FWD, REV, and PLAY, and then press PAUSE. Press PAUSE on both VCRs at the same time to resume copying. 9. Press STOP on both VCRs when finished. 38 Chapter 4 15708270 (VR661HF)(E) 07 Ftrs 38 2/7/01, 4:56 PM VCR Features Picture Search Options The basic way to search during playback is using the remote controls FORWARD or REVERSE buttons (FWD and REV on the VCR). This section contains several other options available for searching a tape. Insert Tape:
Dont forget to insert a recorded tape when using the search features. Forward and Reverse Search You can search a tape during playback either forward or reverse in direction. Note: Sound is turned off during picture search. 1. Press the FORWARD button to search forward or the REVERSE button to search backwards. 2. Press the FORWARD , REVERSE, or PLAY button to return to normal playback. Slow Motion You can view a tape during play or play-pause mode using Slow Motion search. 1. In pause mode, press the FORWARD (FWD) or REVERSE (REV) button to start slow-motion playback. 2. Press the FORWARD button to increase or the REVERSE button to decrease the search speed. 3. Use the TRACKING + or buttons to remove any streaks from the picture. 4. Press the PLAY button to return to normal playback. The VCR switches automatically from slow-motion playback to stop after a few uninterrupted minutes. Frame Advance Frame Advance lets you view single-frame action during playback. 1. While playback is in progress, press the remote controls PAUSE button
(PLAY/PAUSE on the VCR) to freeze the action. 2. Press the F. ADV button on the remote control each time you want to view the next frame of the recording. 3. Press the PAUSE or PLAY button on the remote control (PLAY/PAUSE on the VCR) to return to normal playback. Chapter 4 39 15708270 (VR661HF)(E) 07 Ftrs 39 2/7/01, 4:56 PM VCR Features Index Search The VCR has a VHS Index Search System that automatically records index marks on the tape every time you start a recording. During playback you can locate the program you want to play by the number of index marks or by scanning. The VCR will search forward or reverse from the location you are at on the tape. INDEX SEARCH Press REV or FWD to begin scanning OR enter a specific index number
Press SEARCH to exit GO-TO SEARCH Current tape counter is 2:17:25 Press REV or FWD to go to -:--:00 Press SEARCH to exit To Activate Index Search:
1. While playing back, press the STOP button to freeze the action. 2. Press the SEARCH button on the remote control to display the INDEX SEARCH screen on the TV screen. 3. If you want to search through a certain number of index marks, press two number buttons to enter the number of marks you want to search. Press the CLEAR button on the remote control to correct an entry. 4. Press the FORWARD button to search forward or the REVERSE button to search in reverse. The VCR will locate your index mark and begin playback. If you did not enter a specific index number, the VCR will locate the next index mark and begin playback. 5. Press STOP to stop Index Search. Notes Certain index marks may be missed by the VCR including:
Marks too close to the current location of the tape. Those at the beginning of a recording lasting five minutes or less. Index marks that start at the beginning of the tape. Go-To Search The Go-To Search feature enables the VCR to quickly locate a counter reading anywhere on the tape. When the VCR locates the counter reading, it will begin playback. 1. Press the STOP button. 2. Repeatedly press the SEARCH button on the remote control until the GO-TO SEARCH menu appears on the screen. 3. Use the number buttons to enter the hour and/or minute of the counter reading you want the VCR to go to. If necessary, press the CLEAR button on the remote control to correct an entry. 4. Press the FORWARD button to search ahead or the REVERSE button to search behind. 5. Press the STOP button to end a Go-To search. 40 Chapter 4 15708270 (VR661HF)(E) 07 Ftrs 40 2/7/01, 4:56 PM VCR Features Commercial Advance This feature uses patented technology to detect and mark most commercials on your tape for any recording that is more than 15 minutes long. Once recording is finished, the VCR rewinds the tape to the beginning of the recording and determines where the commercials are located. It then marks the beginning and end of the detected commercial segments, and when finished, returns the tape to the end of the recording. It does not erase commercials from the tape. During playback, the VCR automatically skips the detected commercial segments, or you can chose to manually skip them. This feature reduces three minutes of commercials to approximately 8-12 seconds of fast forwarding in the SLP speed. You can select a background display of blue or see the video as the commercials are skipped. Because television signals do not indicate where commercials are located, this feature finds and marks them through a set of formulas based on how television is broadcast today. Since television stations broadcast differently and insert their own commercials, you may experience some variations in this features effectiveness. Station promotions, identifications, and announcements are not considered commercials, but might be skipped. For more information, see Questions and Answers About COMMERCIAL ADVANCE in the Reference section. All of the COMMERCIAL ADVANCE features are accessed through the COMMERCIAL ADVANCE menu. 1. Press MENU to display the VCR MAIN MENU. 2. Press 6 to display the PREFERENCES menu. 3. Press 8 to display the COMMERCIAL ADVANCE menu. PREFERENCES 1 Remote Control: VCR1 2 Auto Play:
3 Auto TV/VCR:
4 EnergySaver:
5 Front Panel:
6 Tape Speed:
7 Set Auto Repeat 8 COMMERCIAL ADVANCE 0 Exit ON ON 2:00 AUTO SLP Now you can select one of the COMMERCIAL ADVANCE features. COMMERCIAL ADVANCE 1 Marking:
2 Playback:
3 Display:
ON AUTO Blue COMMERCIAL ADVANCE Marking Press 1 to turn commercial Marking ON or OFF. Select ON, and the VCR will mark commercials within approximately 30 seconds for the following types of recording:
Timer, Timer with VCR Plus+, or Express Recording Sets the VCR to automatically mark commercials after the power is tuned off. Recording Allows the VCR to prompt you to mark the commercials when youve stop the recording. Select OFF and the VCR will not mark the commercials. 0 Exit The VCR is waiting to mark commercials in the program you recorded. 1 Mark them now 2 Mark them later 3 Don't mark commercials The VCR will begin marking in 30 seconds... Chapter 4 41 15708270 (VR661HF)(E) 07 Ftrs 41 2/7/01, 4:56 PM VCR Features COMMERCIAL ADVANCE 1 Marking:
2 Playback:
3 Display:
ON AUTO Blue COMMERCIAL ADVANCE Playback Press 2 to switch between Playback: AUTO and MANUAL. Select AUTO to have the VCR automatically advance through the blocks of marked commercials. 0 Exit It works with most 30, 45, and 60-second commercials. Timer Recordings and COMMERCIAL ADVANCE When using Timer Recordings to tape two back-to-back programs on the same channel, you may want to program each show separately so that the beginnings and ends of programs are not automatically skipped by COMMERCIAL ADVANCE. A commercial group starting with the first two minutes or last two minutes of a recording will not automatically be skipped. A commercial will not be skipped if a recording starts in the middle of a commercial segment, one isolated commercial is shown without others, or a commercial is longer than one minute. Press FWD on the VCR (FORWARD on remote) to scan through the commercial. Part of a recorded program may be skipped if the program segment is between commercials and less than one minute or there are frequent dark and quiet scenes. Select MANUAL and the VCR wont advance through the blocks of marked commercials until you press SEARCH. To Override Automatic Skipping If part of the program youve recorded is passed over, you can temporarily override the automatic skipping feature of COMMERCIAL ADVANCE. 1. While the desired portion of the program is being skipped, press the PLAY or STOP button on the remote control or VCR front panel. 2. To view the portion of the tape that was skipped, rewind the tape back to a position before the skipping started using the REVERSE (REV) button. 3. Press the PLAY button to start playback. The portion of the tape will no longer be skipped. Automatic skipping will be enabled again after the VCR detects the end of the commercial group. Notes: If you press SEARCH during playback of material other than commercials, the VCR advances to the end of the next marked commercial block and resumes playback. The VCR resumes playback when it reaches the end of the marked commercials. COMMERCIAL ADVANCE Display Press 3 to switch between Display: BLUE or VIDEO. Select BLUE to display a blue background when the VCR advances through the block of marked commercials. Select VIDEO to display the recorded video when the VCR advances through the block of marked commercials. 42 Chapter 4 15708270 (VR661HF)(E) 07 Ftrs 42 2/7/01, 4:56 PM Movie Advance MOVIE ADVANCE helps you locate certain parts of prerecorded movies (rented or purchased). This feature works two ways: 1) you can go to the beginning of the movie, or, 2) you can skip from one preview to the next. MOVIE ADVANCE works only on tapes with the safety tab removed recorded in SP speed. VCR Features MOVIE ADVANCE What type of tape is this?
1 Purchased/Rented Movie 2 Home Recording 3 Other 1. To select MOVIE ADVANCE, insert a tape with its safety tab removed and press the SEARCH button on the remote control. 2. Press 1 if the tape is a purchased or rented movie, press 2 if its a recording made at home, or press 3 if its something else, you dont know, or you do not want to select MOVIE ADVANCE. Pressing 2 or 3 gives the same response and takes you to a different search feature. If you accidentally make a wrong selection, press STOPEJECT on the VCR (STOP on remote) and reinsert the tape. Press SEARCH. Press CLEAR to cancel If you press 1, the MOVIE ADVANCE menu appears. MOVIE ADVANCE Would you like to go to the start of the movie or to the next preview?
1 Go to movie 2 Go to preview Press CLEAR to cancel 3. Press 1 to advance directly to the beginning of the movie or press 2 to view the first (next) preview. Press 1 to Go To Movie. The following screen appears with a blue background. When the movie is found, you will see a message reading The movie is ready. Press PLAY to start. Note: You can press the STOP button to cancel the MOVIE ADVANCE search. Press 2 to Go To Preview. The on-screen display will tell you that the VCR is looking for the start of the next preview. MOVIE ADVANCE When a preview is detected, the VCR cues it and begins playing. The movie is ready. Press PLAY to start. To Override the Show Previews Mode:
Press the SEARCH button while a tape is being searched. Pressing the SEARCH button while:
Press STOP to cancel The tape is reversing will begin searching for the start of the next preview or long commercial. The tape is searching forward for the next preview will reverse the tape back to the start current preview. Searching for preview The VCR is playing will advance the tape to the start of the next preview, long commercial, or the start of the movie (whichever comes first). Press SEARCH to reverse Press STOP to cancel Chapter 4 43 15708270 (VR661HF)(E) 07 Ftrs 43 2/7/01, 4:56 PM VCR Features Pro-Tect Plus Locking Feature To protect set timer recordings and to disable the VCR for use, the unit can be locked so that the buttons on the front panel or remote control wont work. To Lock: Press and hold either the remote controls ONOFF or VCR button until the front panel display flashes. To Unlock: Press and hold either the remote controls ONOFF or VCR button until the front panel display flashes for several seconds. Unlocking is the only way to turn on and use the VCR. Tracking Your VCR has automatic tracking which removes streaks and noise from the picture. Automatic tracking is activated when you insert a tape or turn on the VCR. Occasionally you may need to manually adjust tracking, especially if the tape was recorded on a different VCR. Use the TRACKING /+ buttons on the VCR front panel or remote control to remove streaks and noise. You can also use tracking when pausing a tape to reduce the noise of the stilled picture. When manually adjusting the picture, automatic tracking is turned off. To turn automatic tracking back on, eject the tape and reinsert it. Note: Tracking has no effect when recording only during playback. Hours Minutes 0:30:00 Seconds Time Counter The time counter shows the actual time used when recording or playing back a tape. The time counter helps locate the beginning or end of recorded events. It resets to 0:00:00 whenever a tape is ejected from the VCR. For example, if you record a 30minute program at the beginning of a tape, rewind it, and then want to go to the end of the first program to start another recording:
1. Press the INFO button twice to display only the time counter. 2. Press the CLEAR button to reset the time counter to 0:00:00. 3. Press the remote controls FORWARD button (FWD on the VCR) to advance a tape until the time counter reads 0:30:00. 4. Press the STOP button. This is the approximate end of a 30-minute program
(you may want to press the PLAY button to verify). When the tape is cued correctly, you can begin recording. 5. Press the INFO button to remove the time counter from the screen and return to the normal display mode. 44 Chapter 4 15708270 (VR661HF)(E) 07 Ftrs 44 2/7/01, 4:56 PM VCR Features On-Screen Displays Pressing the INFO button displays the status of the VCR (Stop, Play Record, etc.) as well as the channel number, time counter position, date, time, and tape speed on the TV screen. Note: The date and time must be set before they can be displayed. 1 2 3 Stop Ch 05 0:30:00 1. Press the INFO button to show the on-screen displays. The current time is displayed in the VCRs front panel. 11/18/01 Sun 1:30PM SLP On-screen display (times out) 0:30:00 Time counter only (does not time out) No displays will appear
(useful for dubbing) 2. Press INFO again to have only the time counter remain on the screen. The time counter is also displayed in the VCRs front panel. 3. Press INFO again to have no displays appear on the TV screen. The time counter remains in the VCRs display panel. This is useful for dubbing tapes. 4. Press the INFO button again to return to the normal display. The current time is displayed in the VCRs display panel. Note: Turning off the VCR also resets the displays. Chapter 4 45 15708270 (VR661HF)(E) 07 Ftrs 45 2/7/01, 4:56 PM VCR Features AUDIO 1 Reception: STEREO 2 Tape Playback: HI-FI Audio Set-Up Features Your VCRs audio setup features affect both tape playback and recordings. The features in this section are accessed through the AUDIO menu. 0 Exit To Display the Audio Menu:
1. Press the MENU button to bring up the VCR MAIN MENU. 2. Press 7 to choose AUDIO. With the AUDIO menu displayed, you are ready to select an item from the menu to set up. Reception Some TV programs are broadcast with stereo audio or a Second Audio Program
(SAP) which offers a second language. The Reception feature lets you select the type of audio you want to record. Press 1 repeatedly to switch between Reception: STEREO, MONO, or SAP. STEREO used for normal or stereo broadcast TV recording. The HI-FI indicator lights on the VCR front panel when the VCRs tuned station is broadcasting in stereo. MONO used if the stereo signal is weak or the sound is too noisy. SAP used to hear/record a Second Audio Program instead of the normal audio on both the Hi-Fi and linear tracks. Tape Playback The VCR records the same audio on both the Hi-Fi stereo and linear tracks on the tape. Hi-Fi sound is recorded on separate left and right stereo channels. Monaural sound is recorded on the linear track. In the AUDIO menu, press the 2 button repeatedly to switch between Tape Playback: Hi-Fi, LINEAR, and MIX. To enjoy Hi-Fi sound, connect your VCR to a stereo television or amplifier/
receiver using the audio jacks. The Tape Playback feature lets you select which audio you play back. Hi-Fi use to play back sound recorded on the Hi-Fi tracks and for normal use. LINEAR use to play back the sound recorded on the linear monaural track, such as a Second Audio Program, or a dubbed voice-over. MIX used to play back the sound recorded on both the linear track and the Hi-Fi track, sound-on-sound. The Hi-Fi indicator lights when MIX is active. 46 Chapter 4 15708270 (VR661HF)(E) 07 Ftrs 46 2/7/01, 4:56 PM Chapter 5 Other Information Chapter Overview:
Troubleshooting COMMERCIAL ADVANCE Q&A Front, Rear, and Display Panel Diagrams Specifications Care and Cleaning Warranty Information Finding the TVs Video Line Input Advanced Connection Diagram Glossary Index Changing Entertainment. Again. 15708270 (VR661HF)(E) 08 Other 47 2/7/01, 4:56 PM 47 Other Information Troubleshooting Tips In this section, you will find answers to common recording, playback, and general VCR questions. Consulting with this section first when there is problem may help you answer common questions. General VCR Problems No power Check to make sure it is plugged into an operating outlet. Check to make sure your connections are correct. VCR does not respond to the remote control Check to make sure there are no objects between the VCR and the remote control. The remote controls batteries may need changing. You are not in VCR-controlling mode. Press the remote controls VCR button to control it. Theres poor or no picture for normal TV viewing Make sure the VCR indicator is off. Make sure the TV is switched to an active channel. Make sure the antenna connections are secure and correct. Rewind does not operate Check to make sure the tape is not already rewound. The clock shows an incorrect time or date There may have been a power interruption. Reset the VCRs time and date. Make sure the clock is set accurately (check AM/PM and date). Check the Daylight-Saving setting. The clock may have adjusted for Daylight-Saving Time. Time did not adjust for Daylight-Saving time. Check to make sure the Daylight-Saving Time feature is set correctly. The VCR makes noise when stopped The VCR is removing the tape from the playheads. This is normal. The head cylinder inside the VCR will continue to rotate for a few minutes after you put the VCR in the stop mode. Cannot select channels over 69 Cable channels over 69 can only be selected if Signal Type: CABLE/ANTENNA feature is set to CABLE. TIMER flashes on the VCR front panel display The clock is not set. Check to make sure there is a cassette in the VCR when a timer recording is set ad the power is turned off. On-screen menus appear in English, French, or Spanish Check the LANGUAGE feature for the preferred on-screen language. 48 Chapter 5 15708270 (VR661HF)(E) 08 Other 48 2/7/01, 4:56 PM Other Information Recording Problems Will not record Make sure there is a recordable tape in the VCR. Eject then reinsert the tape. Make sure the tape is not broken. Make sure the VCR is not in pause mode. Press PAUSE or PLAY to return to normal playback. Make sure the Pro-Tect Plus feature is not active. A VCR Plus+ system or timer recording was not made or the wrong program recorded Make sure the correct PlusCode programming number is entered. Make sure the program was entered correctly (the wrong channel or times may be entered). Make sure the cable box or satellite receiver was turned on when recording was to begin. There may have been a power interruption. Reset the time and date. Check to see if time and date are correct including AM/PM. Make sure the program did not exceed the tapes length or that the tape was not rewound beforehand. Make sure the VCR was turned off at the time recording started. Make sure there was a tape in the VCR with its safety tab intact. The VCR ejects tapes when the end is reached during a timer recording. Make sure the VCR Plus+ system setup was completed correctly. Will not record Make sure the tapes safety tab is intact. Make sure the VCR is not in Video Line Input mode. Press INPUT on the remote control to return to normal viewing. Playback Problems Snowy or no picture during playback Press the remote controls TVVCR button to activate VCR-controlling mode. VCR appears in the front panel display when active. Check the TV channel selected (3 or 4) to make sure it matches the channel selected with CH. 3/4 switch on the back of the VCR. Check to make sure the TVs fine tuning is correct for the channel selected. If you use A/V cables and jacks to connect the VCR to the TV, check all connections for snug and correct connections. Check to make sure the TV monitor is set to Video Line Input (see How to Find Your TVs Video Line Input in this section of the manual for detailed information). Try another tape. Some snow/streaks are normal during search, stop action, frame advance, and slow-motion playback. Chapter 5 49 15708270 (VR661HF)(E) 08 Other 49 2/7/01, 4:56 PM Other Information Streaks in picture during normal playback Press one of the TRACKING buttons to move streaks up or down for the best picture. Check to make sure the tape is of good quality and not worn out. Time counter not working or time counter not working in search modes The time counter does not advance during unrecorded portions of tape. When an unrecorded segment of tape is encountered, the time counter will hold its count until recorded material is detected again. A minus () will appear in front of the time if you rewind the tape farther back than a counter reading of 0:00:00. The time counter disappears during search; this is normal. Will not play Check to make sure there is a tape in the VCR. Try ejecting and reinserting the cassette. Check to make sure the tape is not broken. Check to make sure the VCR is not in pause mode. Press PAUSE or PLAY to return to normal playback. Check the Pro-Tect Plus feature. Will not Auto Channel Search active channels correctly Check to make sure the antenna connections are secure and correct. Check to make sure the Signal Type: CABLE/ANTENNA feature is set correctly. If Detect Automatically was selected for the Signal Type in the AUTO CHANNEL SEARCH menu, try using either CABLE TV or ANTENNA instead. May not be necessary if using a cable box for all channels. Contact your local cable company for more information. Tape plays back in slow motion Press PLAY to return to normal playback. Cassette with safety tab removed does not start to play automatically Check to make sure the AUTO PLAY ON/OFF feature is set to ON. Time counter disappears during searching This is normal. There is no stereo sound during playback Make sure the Tape Playback feature is set to Hi-Fi to hear stereo sound during playback. You must use A/V cables (not provided) and jacks to connect the VCR to the TV (or stereo) to hear true stereo sound during playback. The stereo Audio is too noisy The stereo signal is weak. Set the Reception: STEREO/SAP/MONO to MONO. Press either the TRACKING or + button to minimize picture noise. 50 Chapter 5 15708270 (VR661HF)(E) 08 Other 50 2/7/01, 4:56 PM Other Information Questions and Answers About Will commercials be scanned through only on playback of recordings?
Yes. The VCR rewinds and marks commercial segments after a recording is finished. How fast does this feature scan through commercial breaks?
In SLP tape speed, a 3-minute commercial break is scanned through in approximately 8-12 seconds. In SP, it takes about 25-35 seconds. Are commercials still recorded if I want to watch them?
Yes. The recorded program, including commercials, can be viewed by setting the Playback feature to MANUAL. What if the VCR scans forward through part of my program?
Press PLAy or STOP while the tape is being automatically skipped. rewind the tape back to a position before skipping started, then press PLAY.Automatic skipping will start again after the end of the commercial group is detected by the VCR. Once a recording has been marked, does COMMERCIAL ADVANCE work each time the tape is played?
Yes. If the Playback feature is set to AUTO, the marked commercials should be skipped each time the tape is played in a COMMERCIAL ADVANCE VCR. After marking commercials, is the tape left at the beginning or end of the recording?
The tape is left at the end of the recording so it is in position to begin additional programmed recordings. Does the marking process interfere with other programmed recordings?
No. If two or more recordings are programmed together without sufficient time to mark the first recording, marking will take place after all recordings are completed. What happens if the marking process is interrupted?
Marking can be interrupted to allow use of the VCR. Marking will resume again when the VCRs power is turned off as long as the tape has not been ejected from the VCR. Does COMMERCIAL ADVANCE work in all recording speeds?
Yes, COMMERCIAL ADVANCE works in SP and SLP. Will COMMERCIAL ADVANCE marked recordings work in non-Commercial Advance VCRs?
A COMMERCIAL ADVANCE marked recording will play in a non-Commercial Advance VCR, but commercials will not automatically be skipped. Chapter 5 51 15708270 (VR661HF)(E) 08 Other 51 2/7/01, 4:56 PM Other Information
. Front Panel AUDIO (LEFT and RIGHT) and VIDEO In Jacks Receives signals from another component (like another VCR or camcorder) when connected to the VCR using A/V jacks. Use the INPUT button to select L2 to record from these jacks (L1 indicates the rear panel A/V jacks being active). CHANNEL TRACKING Up and Down Adjusts the image quality by removing picture noise and distortion. FWD Forwards the tape when the VCR is stopped. Searches the picture forward during playback. Starts slow motion during play-pause and increases slow-motion speed. PLAYPAUSE Plays a tape. Pauses action for viewing during playback. Pauses recording to prevent recording of unwanted scenes. POWER Turns the VCR on or off. RECORD Starts VCR recording. Also used for Express Recording (XPR). REV Rewinds the tape when the VCR is stopped. Searches the picture in reverse during playback. Starts slow motion during play-pause and decreases slow-motion speed. STOP/EJECT A single press of this button stops normal VCR functions such as record, playback, rewind, fast-forward, or pause. If pressed a second time, this button ejects an inserted tape. TVVCR Switches the picture signal so that it either comes from the VCR or the TV cable/antenna signal. 52 Chapter 5 15708270 (VR661HF)(E) 08 Other 52 2/7/01, 4:56 PM Other Information VCR REC AM Display Panel Clock/Counter Displays current time, time counter, tape speed, or channel numbers when switching channels. FUNCTION DISPLAYS:
dn & Ld (Down and Load) Front panel display alternates between these two words when time data is being downloaded. REC (Recording indicator) The VCR is recording. REC flashes on the front panel display when a recording is paused.
(Timer indicator) Displayed when an Express Recording (XPR) or timer recording is under way or when the VCR is set for a timer recording and the power is turned OFF. TIMER flashes on the VCR front panel when a timer recording is set and no tape is inserted in the VCR. VCR indicator VCR and TV viewing modes. Indicates that the VCR is in VCR-display mode. Press the TVVCR button to toggle between VCR indicator is ON when the picture displayed is from the VCRs tuner. VCR indicator is OFF when the picture displayed is from the TVs tuner. Chapter 5 53 15708270 (VR661HF)(E) 08 Other 53 2/7/01, 4:56 PM Other Information AUDIO ANT. IN R L OUT IN VIDEO CH. 3 4 RF OUT Back Panel CH. 3/4 switch Determines the channel to which the TV must be tuned in order to see the VCRs picture. Not used when connecting the VCR to the TV using A/V cables. AUDIO (LEFT and RIGHT) and VIDEO IN jacks Receives signals from another component, such as another VCR or camcorder, when connected to these jacks. Use the INPUT button on the VCR or remote control to select the rear video line input A/V jacks (L1) to record from these jacks. AUDIO (Right and Left) and VIDEO OUT jacks component, like a TV or another VCR, when the other component is connected to these jacks. Sends signals from the VCR to another ANT. IN jack Receives a signal from an antenna or cable system when the VCR is attached with RF cables. RF OUT jack Passes the VCRs signal to a TV using the supplied RF cable. 54 Chapter 5 15708270 (VR661HF)(E) 08 Other 54 2/7/01, 4:56 PM Other Information Specifications Format:
VHS Record/Playback System:
Video: 4-head Audio: VHS Hi-Fi record/playback system Video Signal System:
EIA standard: NTSC color Antenna:
Tuner:
75-ohm external VHF/UHF combined antenna terminal USA:
Canada:
181 channels capability*
(125 cable channels) 178 channels capability*
(122 cable channels) Type:
AutoProgramming frequency synthesis Power Requirement:
120V AC, 60 Hz Power Consumption:
17 watts (standby < 3 watts) Dimensions:
Weight:
Other:
3.64 inches high (91 mm) 14.4 inches wide (360 mm) 9.4 inches deep (230 mm) 6.4 pounds (2.9 kg) Automatic head cleaner Storage Temperature Range:
- 22F to +149F
(-30C to +65C) Operating Temperature Range:
+41F to +104F
(+5C to +40C)
*Check your cable companys compatibility requirements. Cleaning the VCR Use a soft cloth or dusting attachment of your vacuum cleaner to dust your VCR. Remove dust from the ventilation holes on the top, back, sides, and bottom of the VCR and all connected components. Plastic surfaces are easily scratched and can be marred by alcohol and various solvents. Avoid excessive use of oil-based furniture polishes since the materials used in the cabinet will accumulate more dust. We recommend using a nonabrasive, antistatic cleaner and polisher.If part of the program is skipped, rewind the tape to the beginning of the skipped program segment and press PLAY. Chapter 5 55 15708270 (VR661HF)(E) 08 Other 55 2/7/01, 4:56 PM Other Information RCA VCR Limited Warranty What your warranty covers:
Any defect in materials or workmanship. For how long after your purchase:
90 days for labor charges. One year for parts. The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm, whichever comes first. What we will do:
Pay any Authorized RCA VCR Service Center the labor charges to repair your VCR. Pay any Authorized RCA VCR Service Center for the new or, at our option, refurbished replacement parts required to repair your VCR. How you get service:
Take your VCR to any Authorized RCA VCR Service Center. To identify your nearest Authorized RCA VCR Service Center, ask your dealer, look in the Yellow Pages, or call 1-800-336-1900. Show the Authorized Service Center Representative your evidence of purchase date or first rental. Pick up your VCR when repairs are completed. What your warranty does not cover:
Customer instruction. (Your Owners Manual clearly describes how to install, adjust, and operate your VCR. Any additional information should be obtained from your dealer.) Installation and related adjustments. Signal reception problems not caused by your VCR. Damage from misuse or neglect. Cleaning of video/audio heads. Batteries. A VCR that has been modified or incorporated into other products or is used for institutional or other commercial purposes. A VCR purchased or serviced outside the U.S.A. Acts of nature, such as but not limited to lightning damage. Product Registration:
Please complete and mail the Product Registration Card packed with your VCR. It will make it easier to contact you should it ever be necessary. The return of the card is not required for warranty coverage. How State Law relates to warranty:
This warranty gives you specific legal rights and you also may have other rights that vary from state to state. If you purchased your VCR unit outside the United States:
This warranty does not apply. Contact your dealer for warranty information. Service calls which do not involve defective materials or workmanship are not covered by this warranty. Costs of such service calls are the sole responsibility of the purchaser. 56 Chapter 5 15708270 (VR661HF)(E) 08 Other 56 2/7/01, 4:56 PM Other Information Finding the TVs Video Line Input You need to tune your TV to the video line input if you are using the VCRs Audio/Video (A/V) OUT jacks to connect to the TVs A/V input jacks. You must select the TVs video line input before you can see the VCRs menus, the cable/antenna reception, and the content thats on a tape. The video line input for TVs varies by brand and model. Below are some steps to try to find your TVs video line input:
If your TV brand is RCA, GE, or Proscan, press the TV button on the VCRs remote control, then press the INPUT button. If you have another brand of TV, see the chapter Using the Remote Control to see if the VCRs remote can be programmed to control your TV. If so, once completed, follow the step above. If those options do not work, try the following ideas. You might access the video line input by:
Pressing a button on the TVs remote control (see the table below). TV Button ONOFF TV VCR REVERSE PLAY FORWARD RECORD STOP PAUSE INFO C HAN SEARCH L O V V O L MUTE CHA N GO BACK CLEAR MENU SPEED Selecting a specific channel from the TVs on-screen menu system (see 1 4 7 IN PUT 2 5 8 0 3 6 9
VC R TV TRACKING F.ADV INPUT Button the table below). Tuning directly to the video line input by selecting a specific channel number (see the table below) Going through all available channels by pressing the channel up or down buttons on the TV or its remote control. Common Video Line Input scenarios:
Video Input Channel Variations Button/Switch on the TV Button on the TV Remote Channel Number VIDEO SIGNAL VID 1 VID 2 S-VID S-VIDEO VID 1 LINE VID VIDEO S-VID INPUT S-VIDEO SOURCE AUX 00 90 91 92 93 VID 1 VID 2 Chapter 5 57 15708270 (VR661HF)(E) 08 Other 57 2/7/01, 4:56 PM Other Information Advanced Connection TV + VCR + Satellite Receiver Using A/V and RF Coaxial Cables Note: Your satellite receiver and television back panels may not look exactly like the models shown here. This connection can also be used for a cable box. 1. Connect the VCR to the TV A. Connect one end of the supplied RF coaxial cable to the RF OUT jack on the back of the VCR and the other end to the TVs antenna input jack. B. Connect the A/V cables. Connect audio cables to the VCRs R and L Audio OUT jacks and the other ends to the TVs corresponding audio input jacks (if your TV only has one audio input jack, use the VCRs L audio jack to connect). Connect one end of the video cable to the VCRs VIDEO OUT jack, and the other end to the TVs video input jack. 2. Connect the satellite receiver to the VCR A. Connect one end of a second RF coaxial cable (not included) to the VCRs ANT. IN jack. Connect the other end to the satellite receivers antenna output jack. B. Connect the A/V cables. Connect audio cables to the VCRs R and L audio IN jacks and the other ends to the satellite receivers audio output jacks. Connect one end of the video cable to the VCRs VIDEO IN jack, and the other end to the satellite receivers video output jack. V T V C R a t e llit e S TV VCR VIDEO AUDIO R L / MONO L IN OUT S-VIDEO 1B CABLE/
ANTENNA 1A AUDIO ANT. IN R L RF OUT CH 3 4 OUT IN VIDEO SATELLITE RECEIVER 2B OUT VIDEO L R S-VIDEO IN FROM ANT OUT TO TV 2A CH3 CH4 SATELLITE IN 3 From Cable or TV Antenna 4 From Satellite 3. Connect a TV antenna or cable feed to the satellite receiver If you have cable or a standard TV antenna, connect its RF coaxial cable (not included) to the antenna input jack on the satellite receiver. 4. Connect the satellite antennas cable to the satellite receiver Connect the satellite antennas RF coaxial cable feed (not included) to the receivers satellite input jack. Note: To hear stereo output from the satellite receiver, you must use the TVs video line input channel. RF coaxial cable only carries mono sound. 58 Chapter 5 15708270 (VR661HF)(E) 08 Other 58 2/7/01, 4:56 PM Other Information Glossary A/V Jacks & Cables Commonly called RCA-type cables. Improves picture and sound quality over RF Coaxial cables. A/V cables are required for stereo audio. EnergySaver Automatically turns the VCR off after a user-defined period of inactivity. Express Recording (XPR) A method of timer recording which tapes for a set period of time using 30-minute increments. Pro-Tect Plus Allows the VCR to be disabled so that the front panel and remote control buttons dont work. Useful for protecting timer recordings. QuickSet Guide An first-time use, interactive, menu-based system that walks you through several setup steps in a series of questions. The QuickSet Guide is also available in the VCRs Main Menu. SAP (Second Audio Program) A second sound track that may be included with a stereo broadcast. Usually used for foreign language dubs of programs. VCR Channels List The active list of channels available to the VCR using the CHANNEL +/- buttons. XPR See Express Recording above. Chapter 5 59 15708270 (VR661HF)(E) 08 Other 59 2/7/01, 4:56 PM Index Index A ADD/REMOVE CHANNELS screen 18 Audio features, set up 46 AUDIO IN jacks 58 AUDIO menu 46 Audio/Video (A/V) jacks 17, 52, 54 AUDIO/VIDEO jacks 26 Auto channel search 17 Auto clock feature 19 Auto play feature 13, 21 Auto TV/VCR feature 22 Automatic rewind 13 Automatic tracking 13, 44 B Back panel jacks 54 Basic recording 13 Batteries (remote control) 11 Broadcast stereo TV recording 38 C Cable box setup 16 Cables positioning 6 CHAN buttons 27 CHANNEL buttons 17, 26 Channels, adding/removing 18 CHANNELS menu 16, 18, 35 CLEAR button 26, 27, 40 Clock display 53 COMMERCIAL ADVANCE 41 Display 42 Marking 41 Playback 42 questions and answers 51 Component buttons 26 Connections 8 Controls back panel 54 front panel 52 Copying tapes 38 D Date and time setting 19 Design specifications 55 Display panel 53 Displays, on screen 45 E EJECT button 13 EnergySaver feature 22 Express Recording (XPR) 2, 32 F F. ADV button 26, 39 FORWARD button 13, 39 Frame advance 39 Front panel controls 52 FWD button 38, 39, 44 G Glossary 59 GO BACK button 26, 27 I Index search 40 Indicators in display panel 53 INFO button 26, 27, 44 INPUT button 27 INPUT button 26, 33, 38, 57 L L1 indicator 38 L2 indicator 38 LANGUAGE menu 16 Locking feature 44 M MENU button 16, 26, 33, 35, 41, 46 MOVIE ADVANCE Overriding 43 Movie Advance 43 MUTE button 27 N Number buttons 20, 26, 27 O OFF button 26, 27 ONOFF button 44 On-screen displays 45 Overheating 6 P PAUSE button 13, 27, 38 Picture search options 39 PLAY button 13, 27, 38 PLAY/PAUSE button 39 POWER button 13 Power surges 6 PREFERENCES menu 21, 41 Pro-Tect Plus locking feature 44 Q QuickSet guide 16 R REC display 53 Reception: STEREO/MONO/SAP feature 38, 46 RECORD button 13, 27, 32, 38, 52 60 Chapter 5 15708270 (VR661HF)(E) 08 Other 60 2/7/01, 4:56 PM Index VCR Plus+
channel lists 36 channel worksheet 37 VCR Plus+ SILVER System 34 VCR Plus+ System Worksheet 37 VCR viewing channel 11, 13 Video Input Channel 57 VOL buttons 27 Recording basic 13 broadcast stereo TV 38 copying /editing tapes 38 Express (XPR) 2, 32 SAP 38 speeds 23 timer 33 Remote component buttons 26 TV function buttons 27 Remote, batteries 11 Removing/adding channels 18 REV button 27, 38, 52 REVERSE button 13, 39 Reviewing timer programs 33 Rewind, automatic 13 RF OUT jack 54 S Safety tab 13, 21 SAP 38 Search forward 39 reverse 39 SEARCH button 27, 40 Set up auto play feature 21 auto TV/VCR feature 22 cable box 16 Daylight-Saving 20 front panel 22 language feature 16 PREFERENCES menu 21 tape speed feature 23 time and date 19 time zone 19 using menu system 16 Signal type changing 18 selecting 18 Slow motion 39 Specifications 55 Speed SLP 23 SP 23 SPEED button 13, 23, 27, 32 Speeds, recording 23 STOP button 13, 27, 32, 38, 52 T Tab, safety 13 Tape eject 13 Tape playback feature 46 Tape playback: HI-FI/LINEAR/MIX 46 Tape speeds 23 Time and date 19 Time counter 44 Time counter display 45 Time display on TV 45 TIME menu 19 Time setting Daylight-saving 20 set time zone 19 Timer programs clearing 33 reviewing 33 Timer recording 33 stopping 33 TRACK buttons 27 Tracking 44 TRACKING buttons 13, 39, 44 Troubleshooting 48 TV button 26, 57 TV function buttons 27 TVVCR button 22, 27, 38 V VCR connecting 8 VCR button 26 VCR function buttons 26 VCR indicator 38, 53 VCR MAIN MENU 16, 19, 46 Chapter 5 61 15708270 (VR661HF)(E) 08 Other 61 2/7/01, 4:56 PM Please do not send any products to the Indianapolis address listed in this manual or on the carton. This will only add delays in service for your product. Thomson multimedia Inc. 10330 North Meridian Street Indianapolis, IN 46290 2001 Thomson multimedia Inc. Trademark(s) Registered Marca(s) Registrada(s) Printed in Korea TOCOM 15708270 15708270 (VR661HF)(E) 08 Other 62 2/8/01, 10:21 AM
1 2 3 4 | User Manual 1of 2 | Users Manual | 1018.27 KiB |
VCR Users Guide Changing Entertainment. Again. VR637HF 15708270 (VR661HF)(E) 01 CVR 1 2/7/01, 4:55 PM Important Information WARNING To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. This symbol indicates
"dangerous voltage" inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product. Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert. Attention: Pour viter les chocs lectriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusq au fond. Refer to the identification/rating label located on the back panel of your product for its proper operating voltage. FCC Regulations state that unauthorized changes or modifications to this equipment may void the users authority to operate it. Cable TV Installer: This reminder is provided to call your attention to Article 820-40 of the National Electrical Code (Section 54 of the Canadian Electrical Code, Part 1) which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical. Product Registration Please fill out the product registration card and return it immediately. Returning the card allows us to contact you if needed. Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model numbers in case you need them. The numbers are located on the back of the VCR. VR637HF Model No Serial No. _______________________________________________________________________________________ Purchase Date:___________________________________________________________________________________ Dealer/Address/Phone: ___________________________________________________________________________ i 15708270 (VR661HF)(E) 01 CVR 2 2/7/01, 4:55 PM Introduction Key Features Overview Your VCR is equipped with features that will add to your recording and viewing experience. The following information summarizes a few of these features. Chapter 4 provides more information about the rest of the VCRs features and how to use them. Introduction VCR Plus+ SILVER System The VCR Plus+ system allows for simple timer recording programming by using a single PlusCode programming number found in most TV program listings. The VCR Plus+ SILVER system simplifies timer recordings by automatically setting up and updating the VCRs clock and channel list for you. Requirements: Make sure the VCR Plus+ SILVER system is active, and that Auto Channel Search and time set features are correct. This feature uses patented technology that detects and marks most commercials on your recordings. The VCR determines where commercials are located, marks the beginnings and ends of detected commercial segments, then easily skips over them during playback. This feature does not erase commercials from the tape. This feature helps locate the beginning of a purchased or rented movie as well as skip thorugh previews. You can go to the beginning of the movie, or, skip from one preview/long commercial to the next. Universal Back-Lit Remote Control Description: The VCRs remote control can operate most RCA, GE, and Proscan TVs with no additional steps. It can be programmed to operate many other brands of TVs. Back-lit buttons offer easier control in the dark. Requirements: Point the remote control at the active component and press the ONOFF button to see if it can be operated. ONOFF TV VCR REVERSE PLAY FORWARD RECORD STOP PAUSE INFO C HAN SEARCH L O V V O L MUTE CHA N GO BACK CLEAR MENU SPEED 1 4 7 IN PUT 2 5 8 0 3 6 9
VC R TV TRACKING F.ADV Rec Ch 36 Record Length 1:30 Press REC to set length Auto Clock Set Description: The VCR automatically looks for time and date information after most power outages as well as each time the machine is turned off. Using time information broadcast in TV signals (if available), the VCRs clock sets itself. Requirements: Start Auto Clock Set using the VCRs on-screen menus. VCR Plus+ and PlusCode are registered trademarks of the Gemstar Development Corporation. The VCR Plus+ system is manufactured under the license from Gemstar Development Corporation. COMMERCIAL ADVANCE and MOVIE ADVANCE are registered trademarks of SRT, Inc.; a Jerry Iggulden invention licensed in association with Arthur D. Little Enterprises. 1 15708270 (VR661HF)(E) 02 Intro 1 2/7/01, 4:55 PM Introduction TIMER RECORDINGS 1 Create a New Program 2 Review Existing Progs. 3 Use VCR Plus+ Code 0 Exit Express Recording (XPR) Description: XPR quickly records the remaining portion of a program already in progress. XPR is a great way to capture the end of a sporting event that has run into overtime or a live broadcast that runs long. Requirements: Repeatedly press the Record button on the VCR front panel or remote control to set the desired duration of time to record. Pro-Tect Plus Locking Description: Locks the VCR so that buttons on the front panel and remote control wont operate the VCR. This feature protects timer programs from frustrating accidents such as being left on at the time of recording. Requirements: Lock the VCR by pressing and holding the POWER button on the remote control for six seconds. The front panel display will blink for several seconds. The VCR unlocks by pressing and holding the POWER button on the remote control, again for six seconds. The front panel display will blink again and release the lock on the system. Front Audio/Video Input Jacks Description: The VCR has Audio/Video (A/V) input jacks on both the front and rear of the unit (there are output jacks on the rear panel only). The front A/V jacks make it easy to plug in an external A/V device, such as a camcorder. Requirements: Make sure that all A/V connections are snug. To see a connected devices image, turn the VCR to its Video Line Input by pressing the remote controls INPUT button. Hi-Fi Quality Sound Description: When using the VCRs A/V jacks, you can feed stereo quality sound from your VCR to your TV or stereo. Stereo quality sound allows for two separate channels of sound (Left and Right) to be heard. Requirements: Using A/V jacks and cables to connect the VCR to the TV or stereo (see page 58 for an advanced connection setup diagram). SQPB S-VHS Quasi Playback Description: Your VCR will be able to play back tapes recorded in S-VHS or S-VHS-ET mode (in VHS quality). Requirements: Insert a tape recorded in S-VHS or S-VHS-ET mode and pressing the PLAY button on the remote control or PLAYPAUSE on the VCR. 2 15708270 (VR661HF)(E) 02 Intro 2 2/7/01, 4:55 PM Table of Contents Product Registration ............................................................................................................. i Introduction ............................................................................................................................ 1 Key Features Overview ......................................................................................................... 1 Connections & Setup ........................................................................................................... 5 Things to Consider Before Connecting Components .......................................................... 6 Cable Considerations ............................................................................................................ 6 Choose Your Connection ...................................................................................................... 7 Using the RF Coaxial Cable to Connect the VCR to a TV .............................................. 7 TV + VCR .......................................................................................................................... 8 TV + VCR + Satellite Receiver ......................................................................................... 9 TV + VCR + Cable Box ................................................................................................... 10 Set the VCRs CH 3/4 Switch ................................................................................................ 11 Plug in the VCR .................................................................................................................... 11 Put Batteries in the Remote Control .................................................................................. 11 Turn on the TV and VCR...................................................................................................... 11 Tune the TV.......................................................................................................................... 11 Using the Remote Control to Navigate On-Screen Menus ............................................... 12 Complete the QuickSet Guide ...................................................................................... 12 Accessing Menus ........................................................................................................... 12 VCR Basics ............................................................................................................................ 13 Playing a Tape ............................................................................................................... 13 Automatic Rewind ........................................................................................................ 13 Tape Eject ...................................................................................................................... 13 Recording ............................................................................................................................. 13 Check the Safety Tab .................................................................................................... 13 Using the VCRs Menu System ....................................................................................... 15 Using On-Screen Menus to Set Up Features ...................................................................... 16 Language ....................................................................................................................... 16 Cable Box Setup ............................................................................................................ 16 VCR Channels List.......................................................................................................... 17 Auto Channel Searching ....................................................................................... 17 Changing the Signal Type ..................................................................................... 18 Adding or Removing Channels ............................................................................. 18 Time and Date ............................................................................................................... 19 Auto Clock Set Feature.......................................................................................... 19 To Turn Auto Clock Set ON .............................................................................. 19 Setting the Time Zone ..................................................................................... 19 Setting Daylight-Saving Time .......................................................................... 20 Setting Time and Date Manually .......................................................................... 20 Additional Set Up Features in the Preferences Menu ....................................................... 21 Remote VCR1/VCR2 Option .......................................................................................... 21 Auto Play ....................................................................................................................... 21 Auto TV/VCR .................................................................................................................. 22 EnergySaver................................................................................................................... 22 Front Panel Brightness (VCR Display) .......................................................................... 22 Tape Speed .................................................................................................................... 23 Set Auto Repeat ............................................................................................................ 23 15708270 (VR661HF)(E) 03 ToC 3 2/7/01, 4:55 PM 3 Table of Contents Using the Remote Control ............................................................................................... 25 Remote Control Buttons ..................................................................................................... 26 Component Buttons ..................................................................................................... 26 VCR Function Buttons ................................................................................................... 26 TV Function Buttons ..................................................................................................... 27 Using the INPUT Button ........................................................................................ 28 Operating a TV with the VCRs Remote Control ............................................................... 28 Do You Need to Program the Remote? ....................................................................... 28 Using the VCRs Features .................................................................................................. 31 Recording Features ............................................................................................................. 32 Express Recording (XPR) ............................................................................................... 32 Timer Recording ............................................................................................................ 33 Stopping a Timer Recording ................................................................................. 33 Reviewing and Clearing Programs ....................................................................... 33 VCR Plus+ SILVER System .............................................................................................. 34 Turning ON or OFF the Auto VCR Plus+ download ............................................. 34 Mapping VCR Plus+ Channels Manually .............................................................. 35 Recording Broadcast Stereo TV or SAP (Second Audio Program) ...................... 38 Copying and Editing Tapes Using Two VCRs ............................................................... 38 Picture Search Options ........................................................................................................ 39 Forward and Reverse Search ........................................................................................ 39 Slow Motion .................................................................................................................. 39 Frame Advance ............................................................................................................. 39 Index Search .................................................................................................................. 40 Go-To Search ................................................................................................................. 40 Commercial Advance .......................................................................................................... 41 Movie Advance .................................................................................................................... 43 Pro-Tect Plus Locking Feature ......................................................................................... 44 Tracking................................................................................................................................ 44 Time Counter ....................................................................................................................... 44 On-Screen Displays .............................................................................................................. 45 Audio Set-Up Features ........................................................................................................ 46 Tape Playback ...................................................................................................................... 46 Other Information .............................................................................................................. 47 Troubleshooting Tips ........................................................................................................... 48 Questions and Answers About COMMERCIAL ADVANCE ................................................. 51 Front Panel .......................................................................................................................... 52 Display Panel ....................................................................................................................... 53 Back Panel ............................................................................................................................ 54 Specifications ....................................................................................................................... 55 Cleaning the VCR ................................................................................................................ 55 RCA VCR Limited Warranty................................................................................................. 56 Finding the TVs Video Line Input ...................................................................................... 57 Advanced Connection ......................................................................................................... 58 TV + VCR + Satellite Receiver ....................................................................................... 58 Glossary ................................................................................................................................ 59 Index .................................................................................................................................... 60 4 15708270 (VR661HF)(E) 03 ToC 4 2/7/01, 4:55 PM Chapter 1 Connections & Setup Chapter Overview:
Things to Consider Before Connecting Choosing Your Connection Making Connections Navigating On-Screen Menus Completing the QuickSet Guide Basic Recording Changing Entertainment. Again. 15708270 (VR661HF)(E) 04 Setup 5 2/7/01, 4:55 PM 5 Connections & Setup Things to Consider Before Connecting Components Protect Components From Power Surges Connect all components before plugging any power cords into the wall outlet. Always turn off the TV and other components before you connect or disconnect any cables. Position Cables to Avoid Audio Hum or Interference Insert all cable plugs firmly into their jacks. Place any Audio/Video (A/V) cables to the side(s) of the TVs back panel instead of straight down the back after connecting components. Try not to coil any twin-lead cables and keep them away from all A/V cables as much as possible. Make sure all antennas and cables are properly grounded. Refer to the Safety Tips sheet packed with your unit for detailed information. Protect Components From Overheating Never block ventilation slots in any component. Arrange the components so that air can circulate freely. Do not stack components. Allow adequate ventilation when placing components in a stand. Place an amplifier or satellite receiver on the top shelf of a stand so heated air rising from it will not flow around other components. Cable Considerations The RF coaxial cable supplied with your VCR carries both sound and picture information. This is the cable used in all connection diagrams illustrated in this chapter. If your TV has A/V input jacks, you should use A/V cables (not supplied) to connect the VCR to the TV. A/V cables provide better picture and sound quality than an RF coaxial cable. If you would like to hook up your VCR using A/V cables, refer to the Advanced Connection information on page 58 in the Other Information chapter of the manual. 6 Chapter 1 15708270 (VR661HF)(E) 04 Setup 6 2/7/01, 4:55 PM RF Coaxial Cable Connections & Setup Using the RF Coaxial Cable to Connect the VCR to a TV This graphic shows the RF coaxial cable supplied with your VCR. This will be the cable used for the basic connections represented in this chapter. Notes: To hear stereo sound, you will need to purchase Audio/Video (A/V) cables (not provided) and connect the VCR to the TV. A/V jacks and cables also provide a superior image and sound quality. For details about using this advanced setup, see the instructions on page 58. Using A/V jacks to connect the VCR to the TV requires tuning to the TVs Video Line Input to see the VCRs picture. For more information about finding your TVs Video Line Input, see page 57. If you prefer, we can provide you with the name of an Authorized Service Representative who will visit your home for a fee to install your electronic entertainment system and to instruct you in its operation. For details about this service, call 1-888-206-3359. Choose Your Connection There are several ways to hook up your VCR depending on the components connected. Please use the following chart to determine which connection is best for you and proceed to the appropriate page. Components Connection Title Go To V T V V T T V C R V C R V C R TV + VCR page 8 TV + VCR +
Satellite Receiver page 9 TV + VCR +
Cable Box page 10 a t e llit e S x o b l e B a C Chapter 1 7 15708270 (VR661HF)(E) 04 Setup 7 2/7/01, 4:55 PM Connections & Setup TV (back panel) VIDEO AUDIO R L / MONO V T V C R VCR IN OUT L S-VIDEO CABLE/
ANTENNA 1 AUDIO ANT. IN R L OUT IN VIDEO CH. 3 4 RF OUT 2 From Cable or Antenna Need Some Help?
If you prefer, we can provide you with the name of an Authorized Service Representative who will visit your home for a fee to install your electronic entertainment system and to instruct you in its operation. For details about this service, call 1-888-206-3359. TV + VCR Note: Your television back panel may not look exactly like the model shown here. 1. Connect the VCR to the TV Connect one end of the supplied RF coaxial cable to the RF OUT jack on the back of the VCR and the other end to the TVs Antenna IN jack. 2. Connect the antenna/cable feed to the VCR Connect the cable or antenna RF coaxial cable to the ANT. IN jack on your VCR. Note: Flip the CH 3/4 switch on the back of the VCR to the channel that is not used in your area. This will be the channel that the TV must be tuned to in order to see the VCRs picture. Go To Page 11 8 Chapter 1 15708270 (VR661HF)(E) 04 Setup 8 2/7/01, 4:55 PM Connections & Setup TV VCR VIDEO AUDIO R L / MONO IN OUT L S-VIDEO CABLE/
ANTENNA 1 AUDIO ANT. IN R L OUT IN VIDEO CH. 3 4 RF OUT SATELLITE RECEIVER 2 OUT VIDEO R L S-VIDEO IN FROM ANT OUT TO TV CH3 CH4 SATELLITE IN 3 From Cable or TV Antenna 4 From Satellite V T V C R a t e llit e S Need Some Help?
If you prefer, we can provide you with the name of an Authorized Service Representative who will visit your home for a fee to install your electronic entertainment system and to instruct you in its operation. For details about this service, call 1-888-206-3359. Chapter 1 TV + VCR + Satellite Receiver Note: Your television and/or satellite receiver back panels may not look exactly like the models shown here. 1. Connect the VCR to the TV Connect one end of the supplied RF coaxial cable to the RF OUT jack on the back of the VCR and the other end to the TVs Antenna input jack. 2. Connect satellite receiver to the VCR Connect a second RF coaxial cable (not included) to the antenna output jack on the satellite receiver and to the ANT. IN jack on the VCR. 3. Connect the antenna to your satellite receiver If necessary, connect an antenna or cable box RF coaxial cable (not included) to the antenna input jack on the satellite receiver. 4. Connect the satellite feed to the satellite receiver Connect the satellite receivers RF coaxial cable feed (not included) to the satellite input jack on the satellite receiver. Go To Page 11 9 15708270 (VR661HF)(E) 04 Setup 9 2/7/01, 4:55 PM Connections & Setup TV VCR VIDEO AUDIO R L / MONO IN OUT L S-VIDEO CABLE/
ANTENNA 1 V T V C R CABLE BOX x o b l e B a C AUDIO ANT. IN R L OUT IN VIDEO CH. 3 4 RF OUT 2 S-VIDEO IN FROM ANT OUT TO TV CH3 CH4 3 From Cable Feed Need Some Help?
If you prefer, we can provide you with the name of an Authorized Service Representative who will visit your home for a fee to install your electronic entertainment system and to instruct you in its operation. For details about this service, call 1-888-206-3359. 10 TV + VCR + Cable Box Note: Your television and/or cable box back panels may not look exactly like the models shown here. 1. Connect the VCR to the TV Connect one end of the supplied RF coaxial cable to the RF OUT jack on the back of the VCR and the other end to the TVs Antenna input jack. 2. Connect the cable box to the VCR Connect one end of a second RF coaxial cable (not included) to the cable boxs antenna output jack and the other end to the ANT. IN jack on the VCR. 3. Connect the cable feed to your cable box Connect the RF coaxial cable feed (not included) to the antenna input jack on the cable box. Go To Page 11 Chapter 1 15708270 (VR661HF)(E) 04 Setup 10 2/7/01, 4:55 PM Connections & Setup Set the VCRs CH 3/4 Switch The CH 3/4 switch on back of the VCR determines what channel the TV must be tuned to see the VCRs image. Choose whichever channel is not used locally in your area. Note: If you connected components using A/V jacks and cables, the VCRs signal must be viewed using the TVs Video Line Input. To find the Video Line Input, refer to the manual that came with the TV or see How to Find Your TVs Video Line Input on page 57 in the Other Information section of this manual. Plug in the VCR Your VCRs power cord has a plastic band strung through the blades. Remove the plastic band before plugging the cord into the power outlet. To remove the band, cut with a pair of scissors and pull it free of the blades. Once the plastic is removed, match the wide blade of the power cord to the wide slot in the AC outlet. Be sure to insert the plug completely. Put Batteries in the Remote Control 1. Remove the battery compartment cover on the remote control. 2. Insert new batteries matching the polarities (+ and ) on the batteries with the diagram in the battery compartment. 3. Put the battery compartment cover back on the remote. Turn on the TV and VCR Turn on the TV and press the VCR button on the remote control to turn it on. Note: If you have an RCA, GE, or Proscan TV, your VCRs remote control may be able to operate it without being programmed. Press the TV button on the remote control and then the ONOFF button. If neither one turns on the TV, see Using the Remote Control starting on page 25 for details about programming the remote control to operate other brands of TVs. Tune the TV Tune the TV to the VCR viewing channel. The VCR viewing channel is channel 3, 4, or the TVs video line input. If you connect your VCR using RF coaxial cable only, turn the TV to channel 3 or 4 (whichever was set on the CH 3/4 switch). If you connected the VCR using A/V jacks and cables, select the TVs video line input. For more information see How to Find the TVs Video Line Input on page 57 in the Other Information section of this manual. Chapter 1 11 15708270 (VR661HF)(E) 04 Setup 11 2/7/01, 4:55 PM Connections & Setup Using the Remote Control to Navigate On-Screen Menus The technical term is Navigation how you move through the on-screen menus. The theory is the same for all the menu screens; use the corresponding number button on the remote control select it. To choose an on-screen item, press the remote controls corresponding number button. Note: Selecting a menu item can take you to another menu, activate a choice, or activate a data entry field (such as the hour field in the Set Time menu). Select a language. Seleccione un idioma. Choisissez une langue. 1 English 2 Espaol 3 Franais VCR MAIN MENU 1 VCR Plus+
2 Timer Recordings 3 Time 4 Channels 5 Setup 6 Preferences 7 Audio 8 Language 0 Exit All of the VCRs menus are accessed through the Main Menu. Press the remote controls MENU button to start. Complete the QuickSet Guide The menu system in your VCR allows you to customize your preferences as well as use all the VCRs features. To help you use the VCR as quickly as possible, there is an initial QuickSet Guide that walks you through several important setup steps at one time. The first time you turn on the VCR, you will be able to set up available channels, time and date information, and more. The first menu you will see asks which language you prefer to have the on-screen menus appear in. Note: With numbered menu choices, press the corresponding number button on the remote control to automatically select it. In the case of the language menu, press 1 for English, 2 for Espaol (Spanish), or 3 for Franais (French). The remaining menus throughout the setup will appear in the language chosen. Just follow the step-by-step procedures until the QuickSet Guide is complete. Accessing Menus The series of preferences that are set in the QuickSet Guide can also be handled individually using the VCRs on-screen menu system. There are other settings not covered in the initial setup that are also handled using the on-
screen menus. For example, if you decide to run the QuickSet Guide again, you can access the Setup menu by pressing the remote controls MENU button. Once the Main Menu is displayed, press the 5 button to choose Setup. From there, you can start the QuickSet Guide from the beginning. All on-screen menus are accessed the same way, starting in the Main Menu which is displayed by pressing the remote controls MENU button. Note: See chapter two, Using On-Screen Menus, for details about changing the VCRs individual settings. 12 Chapter 1 15708270 (VR661HF)(E) 04 Setup 12 2/7/01, 4:55 PM Connections & Setup VCR Basics Once your initial settings are complete, you can begin using your VCR. In order to begin, you must first understand some basic concepts. Playing a Tape 1. Tune the TV to your VCR viewing channel (03, 04, or the video line input). 2. Insert a tape in the VCR. If the Auto Play feature is set to ON, the tape automatically begins playback
(if the safety tab on the tape is removed). Press FWD or REV (FORWARD or REVERSE on the remote control) to Automatic Tracking The VCR has automatic tracking which adjusts the picture when playing back a tape recorded on another VCR. To adjust tracking manually, use the TRACKING -/+
buttons on the remote control. Safety Tab Chapter 1 cue the tape at the desired starting position. Press PLAY (if necessary) to begin tape play. Press PAUSE for stop action. Press TRACKING up or down (TRACKING + or on the remote control) to remove any streaks from the picture, if necessary. Press STOP to stop playback. Automatic Rewind The VCR automatically rewinds the tape if it reaches the end of the tape during playback. While rewinding, you can press the ONOFF button and the VCR will turn off after finishing. If the tape has no safety tab, it will be ejected. Tape Eject Press the EJECT button on the VCR when stopped to eject the tape. You can also press and hold the remote controls STOP button for three seconds. Recording To Capture Programming with Basic Recording Methods:
1. Set the tape speed by pressing the SPEED button on the remote control
(see Recording Speed on page 23 for information about recording speeds). 2. Press the RECORD button to begin recording. 3. Press the STOP button to halt recording. If you just want to pause the recording for a short time (like during a commercial), press PAUSE instead of STOP. Check the Safety Tab No matter which recording option you use, make sure there is a tape in the VCR with its safety tab in place. You cannot record on a tape with its safety tab removed. If the safety tab is removed and you want to record, simply cover the hole with adhesive tape. 13 15708270 (VR661HF)(E) 04 Setup 13 2/7/01, 4:55 PM This page left blank intentionally 15708270 (VR661HF)(E) 04 Setup 14 2/7/01, 4:55 PM Chapter 2 Using the VCRs Menu System Chapter Overview:
Using On-Screen Menus Cable Box Setup Setting Time and Date Setting VCR Preferences Changing Entertainment. Again. 15708270 (VR661HF)(E) 05 Menu 15 2/7/01, 4:55 PM 15 Using On-Screen Menus Using On-Screen Menus to Set Up Features You set up many of the VCRs features by using the menu system as discussed in the previous chapter. Each feature that appears in the QuickSet Guide is explained in this section as well as a few other features you should set up to get the most out of your VCR. Note: Not all the VCR screens are shown in this manual when explaining how to access features. Language Selecting your preferred language determines how the on-screen displays will appear. To change the language:
1. Press MENU to display the VCR MAIN MENU. 2. Press the 8 button to select LANGUAGE. 3. Select English, Spanish (Espaol), or French (Franais). LANGUAGE Select a language. 1 English 2 Espaol 3 Franais Press MENU to continue Is Something Missing?
These instructions will not show all of the step-by-step On-Screen Menus. Make sure to follow the instructions completely to get to the menus being discussed. Cable Box Setup This setup applies only when all channels are received through a cable box. In this case, the VCR will automatically enter the channel used to view cable box programming. Your VCR will use this channel for all future timer recordings. 1. Press MENU to display the VCR MAIN MENU. 2. Press 4 to display the CHANNELS menu. CHANNELS 3. Press 5 to display the CABLE BOX SETUP menu. 1 Auto Channel Search 2 Add/Remove Channels 3 Signal Type: CABLE 4 VCR Plus+ Setup 5 Cable Box Setup 6 SAT Setup 0 Exit 16 Chapter 2 15708270 (VR661HF)(E) 05 Menu 16 2/7/01, 4:56 PM CABLE BOX SETUP Do you use your cable box to receive ALL channels or only SOME channels?
1 ALL channels 2 Only SOME channels 3 Cancel setup CABLE BOX SETUP The VCR will now receive all signals from the cable box on channel 04. Press MENU to continue Using On-Screen Menus 4. Select one of the three choices. If ALL Channels is selected, enter the output channel of the cable box (usually 03 or 04), or if A/V jacks connect the VCR to the TV, press the INPUT button on the VCRs remote control. 5. Once you complete the setup, the VCR confirms that it will now receive all signals on the designated channel. VCR Channels List Your VCR may come with a list of channels preset at the factory. Even though it may come with such a list, you might want to add or delete certain channels. Note: If you use a cable box to view all channels, this step is not necessary. Auto Channel Searching Notes: Use Auto Channel Search to place all available channels in memory. If you ever change cable or antenna signals, you may need to run the Auto Channel Search feature again. 1. Press the MENU button to display the VCR MAIN MENU. 2. Press 4 to select CHANNELS. 3. Press 1 to select AUTO CHANNEL SEARCH. AUTO CHANNEL SEARCH 4. Select one of the three options:
What type of signal are you using?
1 Cable TV 2 Antenna 3>Detect Automatically 0 Cancel Cable TV searches for cable stations. Antenna searches for local broadcast stations. Detect Automatically decides which input to use for you. Note: With Detect Automatically, a strong cable or antenna signal in your area may cause channels to be detected inaccurately. If this should happen, manually select the input signal for the system you have. The VCR begins scanning for channels available in the area (taking about one-to-two minutes). When scanning is complete, the VCR tunes to the lowest channel available. After completing Auto Channel Search, pressing the remote controls CHAN + or - buttons should only select active channels. Chapter 2 17 15708270 (VR661HF)(E) 05 Menu 17 2/7/01, 4:56 PM Using On-Screen Menus CHANNELS 1 Auto Channel Search 2 Add/Remove Channels 3 Signal Type: CABLE 4 VCR Plus+ Setup 5 Cable Box Setup 6 SAT Setup 0 Exit ADD/REMOVE CHANNELS Channel 115 is presently ADDED Press CLEAR to remove Press MENU to exit Changing the Signal Type This feature is useful if your cable signal goes out; it allows you to switch to a regular antenna for alternate television reception. 1. Press the MENU button to display the VCR MAIN MENU. 2. Press the 4 button to choose CHANNELS. 3. Press 3 to choose between Signal Type: Cable and Antenna. When finished, press 0 to exit back to the Main Menu and 0 again to exit to normal viewing. Adding or Removing Channels You might want to add or remove channels after using Auto Channel Search, especially if there are weak signals or channels with content you dont care for. 1. Press the MENU button to display the VCR MAIN MENU. 2. Press 4 to choose CHANNELS. 3. Press 2 to choose ADD/REMOVE CHANNELS. To go to the channel you want to add or remove, use the remote controls CHANNEL + or buttons or enter a specific channel number using the number buttons. Once the desired channel is displayed, the on-screen menu will tell you if the channel is currently in the VCRs viewing list. Press the CLEAR button to remove a channel from the available channels list or press the INFO button to add it. 4. Press the MENU button to exit out of the menus. Note: To view active channels, use the remote controls CHANNEL + and -
buttons. You can also access channels not available in the active channel list by using the remote controls number buttons to enter the specific channel number. 18 Chapter 2 15708270 (VR661HF)(E) 05 Menu 18 2/7/01, 4:56 PM Using On-Screen Menus Time and Date Your VCR gives you two ways to set the time and date; manually or by using the Auto Clock Set feature. Using Auto Clock Set enables the time to be updated each time the VCR is turned off by using time and date information carried in certain broadcast signals. Auto Clock Set Feature The Auto Clock Set feature is set to ON by default at the factory. In the ON setting, the VCR looks for a channel carrying time data and updates the clock automatically. In order for Auto Clock Set to work properly though, certain steps must first be completed such as Auto Channel Search, setting the time zone, and setting the Daylight-Saving feature. Notes: Auto Clock Set is available only in limited areas. You must set available channels, time zone, and Daylight-Saving settings for Auto Clock Set to work. When using Auto Clock Set with a cable box, the VCR will not reset the clock after a power outage unless the cable box is tuned to the channel carrying time data. If the time does not automatically set after trying for ten minutes, manually set the time and date information using the TIME menu (see the next page for information on manually setting time and date information). To Turn Auto Clock Set ON Note: make sure that available channels, time zone, and Daylight-Saving features are set before turning on Auto Clock Set. 1. Press MENU to display the VCR MAIN MENU. 2. Press 3 to choose TIME. 3. Press the 2 button repeatedly to toggle between Auto Clock Set ON and OFF. Setting the Time Zone 1. Press MENU to display the VCR MAIN MENU. 2. Press 3 to choose TIME. 3. Press 3 to chose SET TIME ZONE. 4. Select your time zone by pressing the corresponding number button. If you select Automatic for your time zone, the VCR sets the clock using the first time information it finds. If the time set is not correct, select another time zone or set the time and date through the menu system. TIME 1 Set Time and Date 2 Auto Clock Set:
3 Set Time Zone 4 Set Daylight Saving ON Time Data was found on channel 20. 0 Exit SET TIME ZONE What is your Time Zone?
1 Eastern 2 Central 3 Mountain 4 Pacific 5 Alaska 6 Hawaii 7>Automatic Press MENU to continue Chapter 2 19 15708270 (VR661HF)(E) 05 Menu 19 2/7/01, 4:56 PM Using On-Screen Menus Setting Daylight-Saving Time 1. Press MENU to display the VCR MAIN MENU. 2. Press 3 to choose TIME. 3. Press 4 to choose SET DAYLIGHT SAVING. 4. Select the appropriate option. Notes: DST stands for DaylightSaving Time. If you choose Automatic for the time zone, the VCR sets the clock using any DST information broadcast in the channels signal. TIME 1 Set Time and Date 2 Auto Clock Set:
3 Set Time Zone 4 Set Daylight Saving ON Time Data was found on channel 20. 0 Exit SET DAYLIGHT SAVING Does your area observe Daylight Saving Time from April to October?
1 Yes, DST is observed 2 No 3 Automatic Press MENU to continue Displaying Time and Date Pressing the INFO button on the remote control or VCR displays the time and date on screen temporarily. Setting Time and Date Manually If Auto Clock Set was unsuccessful, set the time and date manually in the TIME menu. Auto Clock Set is automatically turned off when time and date information is set this way. 1. Press MENU to display the VCR MAIN MENU. 2. Press 3 to choose TIME. 3. Press 1 to choose SET TIME AND DATE. TIME 1 Set Time and Date 2 Auto Clock Set:
3 Set Time Zone 4 Set Daylight Saving ON Time Data was found on channel 20. 0 Exit SET TIME AND DATE 4. Enter the data using the number buttons. Press 0 before single-digit numbers and follow the on-screen directions to exit the menus. Time --:--
(hh:mm) Date --/--/--
Press MENU to cancel 20 Chapter 2 15708270 (VR661HF)(E) 05 Menu 20 2/7/01, 4:56 PM PREFERENCES 1 Remote Control: VCR1 2 Auto Play:
3 Auto TV/VCR:
4 EnergySaver:
5 Front Panel:
6 Tape Speed:
7 Set Auto Repeat 8 COMMERCIAL ADVANCE 0 Exit ON ON 2:00 AUTO SLP The PREFERENCES menu allows changes to be made to a variety of different VCR features. Using On-Screen Menus Additional Set Up Features in the Preferences Menu Note: The features described on the following pages are all accessed through the PREFERENCES menu. To Access the PREFERENCES menu:
1. Press MENU to display the VCR MAIN MENU. 2. Press 6 to select PREFERENCES. You are now ready to select an item from the PREFERENCES menu to set up. Remote VCR1/VCR2 Option Some universal remote controls have buttons labeled VCR1 and VCR2. These remotes can operate up to two VCRs. If you have a universal remote control with this ability, your RCA VCR can be controlled with either the VCR1 or VCR2 button. See the documentation that came with your universal remote control for details about programming it to operate your RCA VCR. In the PREFERENCES menu, press 1 to select the Remote Control feature. Then press the VCR2 button on your universal remote control to change the setting. Then, the VCR will respond to the universal remote controls VCR2 button. To change the remote control setting back to VCR1, display the PREFERENCES menu, press 1, and then press the VCR1 button on the universal remote control. Note: Remember you must press VCR1 or VCR2 on a universal remote control (not included) whichever is selected in the PREFERENCES menu before the remote control will operate the VCR. Auto Play With Auto Play turned ON (the factory default setting), the VCR automatically starts playback when you insert a tape with its safety tab removed. To Access Auto Play:
1. In the PREFERENCES menu, press 2 repeatedly to switch between Auto Play: ON and OFF. Select ON if you want a tape with its safety tab removed to start playing automatically when inserted. Select OFF if you do not want a tape with its safety tab removed to start playing automatically. Chapter 2 21 15708270 (VR661HF)(E) 05 Menu 21 2/7/01, 4:56 PM Using On-Screen Menus ON ON 2:00 AUTO SLP PREFERENCES 1 Remote Control: VCR1 2 Auto Play:
3 Auto TV/VCR:
4 EnergySaver:
5 Front Panel:
6 Tape Speed:
7 Set Auto Repeat 8 COMMERCIAL ADVANCE 0 Exit The PREFERENCES menu allows changes to be made to a variety of different VCR features. Auto TV/VCR To control whether the VCRs TV/VCR setting changes automatically to VCR-
viewing mode when turned on, use the Auto TV/VCR setting. To Access Auto TV/VCR:
In the PREFERENCES menu, press 3 repeatedly to toggle between Auto TV/VCR:
ON and OFF. Note: Pressing the TVVCR button on the remote control will switch between VCR and TV-viewing modes. When in VCR-viewing mode, VCR is displayed on the front panel. The VCR indicator turns off when in TV-
viewing mode. Select ON to switch VCR-viewing mode on automatically when the power is turned on. The VCR must be connected to the TV using the supplied RF coaxial cable. Select OFF to remain in the TV-viewing mode when the VCR is initially turned on. Leaving Auto TV/VCR off is useful if you use A/V cables to connect the VCR to the TV and you watch the VCRs picture using the TVs Video Line Input. This way, the antenna/cable signal will not be interrupted by the VCR. EnergySaver By default, the VCR automatically turns off after two hours of inactivity. This can be changed in the PREFERENCES menu by pressing the 4 button repeatedly to change the time delay or to disable the feature altogether. Select OFF and the VCR will stay on until you shut it off. Select 1:00, 2:00, or 3:00 and the VCR will turn off after one, two, or three hours of inactivity. Thirty seconds before automatically shutting off, the VCR displays an on-screen message reading, The VCR will turn off in 30 seconds. Press any key to cancel. Pressing any remote control or VCR front panel button will halt the countdown. If you use the VCRs tuner instead of your TV to view channels, you may want to turn off this feature. Front Panel Brightness (VCR Display) You can change the brightness level of the VCRs front panel display. In the PREFERENCES menu, press the 5 button repeatedly to toggle between options:
AUTO means the display brightens when the VCR is on and dims when the VCR is off. BRIGHT keeps the display bright whether the VCR is on or off. DIM keeps the display at a low brightness level whether the VCR is on or off. 22 Chapter 2 15708270 (VR661HF)(E) 05 Menu 22 2/7/01, 4:56 PM Recording Speeds SP (Standard Play) Gives the best quality recording, but fewer programs can be recorded on the tape. SLP (Super Long Play) Gives three times the recording time of tapes recorded in SP mode. Recording Times Cassette SP 2 Hr T-120 T-160 Using On-Screen Menus Tape Speed You can choose as the preferred recording tape speed either Standard Play (SP) or Super Long Play (SLP). The speed selected appears in the VCRs front display panel and in timer and VCR Plus+ system recording menus. To Select a Preferred Tape Speed:
In the PREFERENCES menu, press the 6 button repeatedly to switch between SP and SLP settings. Note: For an explanation of recording speeds, see the note to the left. SLP 6 Hr To Override the Preferred Tape Speed:
Press the SPEED button on the remote control. 2 Hr/40 Min 8 Hr Set the tape speed in the timer or VCR Plus+ system recording menus. AUTO REPEAT Set the length of time you want the tape to play in a repeating loop Loop from 0:00 to 2:--
(h:mm) Press CLEAR to turn off Press MENU to exit When you turn off the VCR, the tape speed reverts to the one selected as the default. Set Auto Repeat A tape can be set to play the same segment over and over in a repeating loop with the Set Auto Repeat feature. Set Auto Repeat uses the VCRs memory counter to determine the duration of the loop. In the PREFERENCES menu, press the 7 button to choose Set Auto Repeat. The SET AUTO REPEAT menu will ask for an ending time for the loop to be specified:
The CLEAR button will erase all three numbers entered and move the cursor back to the first position (hours). The Press CLEAR to turn off message will appear only after the first number has been entered into the end time. Auto Repeat is set back to -:-- by resetting the dialog box, ejecting a tape, powering off the VCR, power interruption, or by recording start. When a duration time has been set:
The VCR will automatically switch to rewind if the counter meets or goes past the set Auto Repeat duration. The VCR will automatically switch to playback during rewind if the counter equals or is less than 0:00. The Auto Repeat may be adjusted by setting the counter to 00:00. This can be done by pressing the CLEAR button while the tape counter is on screen or on the front panel display. The counter will not reset while rewinding in an Auto Repeat loop. Chapter 2 23 15708270 (VR661HF)(E) 05 Menu 23 2/7/01, 4:56 PM This page left blank intentionally 15708270 (VR661HF)(E) 05 Menu 24 2/7/01, 4:56 PM Chapter 3 Using the Remote Control Chapter Overview:
Buttons on the Remote Control Programming the Remote to Operate Other Components How To Use the Remote After Youve Programmed It Changing Entertainment. Again. 15708270 (VR661HF)(E) 06 Remote 25 2/7/01, 4:56 PM 25 Using the Remote Control ONOFF TV VCR REVERSE PLAY FORWARD RECORD STOP PAUSE INFO C HAN SEARCH L O V V O L MUTE CHA N GO BACK CLEAR MENU SPEED 1 4 7 IN PUT 2 5 8 0 3 6 9
VC R TV TRACKING F.ADV Remote Control Buttons The backlit remote has a light button (
this button to light the buttons on the remote. The remote buttons remain lit when they are pressed within a few seconds of each other. If a button is not pressed within approximately seven seconds, the light turns off to conserve battery power. The remote control is capable of controlling your VCR and many brands of televisions. If you have an RCA, GE, or Proscan TV, you may be able to control it without having to program the remote.
) that glows in the dark. Press Component Buttons ONOFF Turns off VCR when remote is set to control the VCR. Also turns some compatible components on and off. TV Turns on a compatible RCA, GE, or PROSCAN TV and sets the remote to control the TV. Also used with the ONOFF button to turn on a different brand of TV (if programmed) and sets the remote to control the TV. VCR Turns on a compatible RCA, GE, or PROSCAN VCR and sets the remote to control the VCR. VCR Function Buttons CHAN Up or Down Selects next higher or lower channel in the VCRs channel memory. CLEAR Resets time counter to 0:00:00. Allows you to change entries when setting the clock or a timer recording. F. ADV Lets you view one frame with each press of the button when tape is in pause. FORWARD Fast forwards the tape when the VCR is stopped. Searches forward through a tape during playback. Starts slow motion during play-pause and increases slow-motion speed. GO BACK Switches between two channels. Select one channel and then select another using the number buttons. Press GO BACK to switch between the two channels. In menu mode, press to go back to a previous menu. INFO Shows the status displays on the TV screen. INPUT Selects between the VCRs line input or tuner. Line input refers to the signal coming from the component connected to the AUDIO/
VIDEO IN jacks on the back (L1) or front (L2) of the VCR. MENU Brings up VCR MAIN MENU on the TV screen. Numbers (0 through 9) Select a channel up to 99 by pressing two numbers. Select a cable channel over 99 by pressing and holding 1 until 1 appears on the screen. Then press the other two numbers. 26 Chapter 3 15708270 (VR661HF)(E) 06 Remote 26 2/7/01, 4:56 PM Using the Remote Control PAUSE Pauses playback or recording. Press PAUSE a second time to return to playback or recording. PLAY Plays a tape. RECORD Starts VCR recording. Also used for Express recording. REVERSE Rewinds the tape when the VCR is stopped. Searches backward through a tape during playback. Starts slow motion during play-pause and decreases slow-
motion speed. SEARCH Displays INDEX and GO-TO Search menus on screen when the VCR is stopped. Advances the tape forward through 30 seconds of recorded material during playback. Each press advances the tape an additional 30 seconds (up to five minutes). This button also displays the MOVIE ADVANCE screen for prerecorded movies and starts COMMERCIAL ADVANCE skipping during playback. SPEED Selects a recording speed (SP or SLP). STOP Stops the current VCR function such as record, playback, rewind, or fast forward. TRACKING Up or Down Lets you manually reduce the streaks that may appear on the picture during play, slow motion, or pause. Reduces picture jitter during stop-
action playback. TVVCR Switches the picture signal so that it either comes from the VCR or cable/
antenna system. TV Function Buttons CHAN Up or Down Selects next higher or lower channel in the TVs channel memory. CLEAR Removes menus or status displays from the screen. GO BACK Switches between two channels. Select one channel and then select another using the number buttons. Press GO BACK to switch between the two channels. INFO Shows the TVs status displays on the TV screen. INPUT Selects between the TVs input channel or tuner. Press to see the VCR signal if you connected your VCR using the AUDIO/VIDEO jacks. MUTE Reduces volume to minimum level. Numbers (0 through 9) Select a channel up to 99 by pressing two numbers. Select a cable channel over 99 by pressing and holding 1 until 1 appears on the screen. Then press the other two numbers. ONOFF Turns a compatible TV off and on. VOL Up and Down Raises and lowers sound of TV. Chapter 3 27 15708270 (VR661HF)(E) 06 Remote 27 2/7/01, 4:56 PM Using the Remote Control Using the INPUT Button Use the INPUT button to toggle through the available Video Line Input sources (L1, L2, and regular broadcasting signals) and regular broadcast signals. Video Line Input allows you to view the image from a connected device (like a camcorder) through the VCR. 1. Press the remote controls VCR button to activate VCR-controlling mode. Make sure that the VCR is turned ON. 2. Press the remote controls INPUT button to tune to the Video Line Input source. L1 represents the rear A/V jacks and L2 represents the front A/V jacks. 3. Press the INPUT button again to tune back to the broadcast signal you were previously watching through the VCR. Operating a TV with the VCRs Remote Control The remote control that came with your VCR can be programmed to operate most brands of remote-controllable TVs and should already control most RCA, GE, and Proscan models without programming. Do You Need to Program the Remote?
To determine whether the remote control needs to be programmed to operate your TV, turn the TV on, point the remote control at it, then press the remote controls TV button (this puts the remote control into TV-operating mode and should automatically turn on most RCA, GE, and Proscan TVs). Press the remote controls ONOFF button to see if the TV responds to the command. If not, the remote control needs to be programmed to control that model TV. Programming the Remote Control To program your remote control, you must use the code list on the next page. Look up the brand name of your TV and the code(s) that brand uses. Notes: This remote control may not operate all models of the brands shown in the code list. Note the difference between the TV and VCR on-screen displays to know which component the remote control is operating. 1. Turn on the TV. 2. Find your TV brand and code number(s) in the code list. 3. Press and hold the TV button on the remote control. 4. Enter the code from the code list. 5. Release the TV button, then press the CHAN up or down button. If the TV responds to the remote controls command, the remote is programmed. 6. If the TV does not respond, repeat these steps using the next code listed for your TVs brand. 28 Chapter 3 15708270 (VR661HF)(E) 06 Remote 28 2/7/01, 4:56 PM
1 2 3 4 | User Manual 2 of 2 | Users Manual | 945.08 KiB |
Using the Remote Control TV Codes Akai ......................................... 03 AOC ..................................... 06,12 Candle ....................................... 06 Citizen ....................................... 06 Colortyme ................................. 06 Concerto ................................... 06 Curtis Mathes ....................... 01,06 Daewoo ............................... 06,12 Daytron ..................................... 06 Electrohome ........................ 06,12 Emerson .................................... 06 Envision .............................. 05, 06 Fisher .................................. 05, 08 GE .......................... 00, 01, 06, 11 Goldstar ............................... 06,12 Hallmark ................................... 06 Hitachi ................................. 06,14 Infinity ...................................... 04 J C Penney ....... 00, 01, 06, 09, 12 JBL ............................................. 04 Jensen ....................................... 06 JVC ...................................... 10, 11 Kawasho ............................. 03, 06 Kenwood ............................ 06, 12 Loewe ....................................... 04 Luxman ..................................... 06 LXI .................................04, 05, 07 Magnavox .....................04, 06, 12 Marantz ............................... 04, 06 MGA .................................... 06, 12 Mitsubishi ........................... 06, 12 MTC .......................................... 06 NAD ........................................... 07 NEC ............................................ 06 Panasonic ...................... 04, 08, 11 Philco ............................. 04, 06, 12 Philips ...................... 03, 04, 06, 12 Pioneer ...................................... 06 Portland ............................... 06, 12 Proscan ...................................... 01 Proton ........................................ 06 Quasar ....................................... 11 Radio Shack ................... 01, 05, 13 RCA ................................ 01, 06, 12 Realistic ...................................... 05 Sampo ........................................ 06 Samsung ........................ 06, 09, 12 Sanyo ................................... 05, 08 Sears ....... 01, 05, 06, 07, 08, 10, 12 Sharp ..................................... 06,13 Sony ........................................... 03 Soundesign ................................ 06 Sylvania .......................... 04, 06, 12 Technics ..................................... 11 Techwood .................................. 06 Teknika ...................................... 06 TMK ........................................... 06 Toshiba .................... 05, 07, 08, 09 Universal .................................... 00 Victor ......................................... 10 Wards ........... 00, 01, 04, 06, 12, 13 Yamaha ...................................... 12 Zenith ........................................ 02 Chapter 3 29 15708270 (VR661HF)(E) 06 Remote 29 2/7/01, 4:56 PM Using the Remote Control Operating the TV After you set up the remote control, see which buttons operate your TV:
1. Point the remote control at the TV, and press the TV button. If the TV does not turn on, press the TV button and then press the ON OFF button. 2. You may want to experiment to see which buttons operate your TV. Try pressing buttons, such as VOL and MUTE. See the button descriptions in this chapter for details about what each remote control button does. 30 Chapter 3 15708270 (VR661HF)(E) 06 Remote 30 2/7/01, 4:56 PM Chapter 4 Using the VCRs Features Chapter Overview:
Recording Express Recording (XPR) Timer Recordings Using the VCR Plus+ System Copying and Editing Tapes Changing Entertainment. Again. 15708270 (VR661HF)(E) 07 Ftrs 31 2/7/01, 4:56 PM 31 VCR Features Recording Features Your VCR provides many ways to capture programming:
1. Recording lets you press one button to record a program. 2. Express Recording (XPR) allows recording to start while a program is being watched. This feature automatically stops recording after a designated period of time. 3. Timer Recording program the VCR for a daily, weekly, or one-time recording which will automatically start and stop at the times you set. 4. Timer Recording with the VCR Plus+ System program the VCR by entering a PlusCode programming number found in most TV program listings. Express Recording (XPR) Use XPR to quickly record the remaining portion of a program being watched. XPR is a great way to capture the end of a sporting event that has run into overtime or a live broadcast that runs long. XPR works in 30-minute increments. You can capture the last 30, 60, 90, etc. minutes of programming (depending on tape length), up to four hours total. Rec Ch 36 Record Length 0:00 Rec Ch 36 Record Length 1:30 Press REC to set length To Activate XPR:
1. 2. If necessary, turn on the VCR and tune it to the channel with the desired programming. If necessary, insert a tape with its safety tab in place into the VCR. Make sure it is cued to record at the proper starting point. Note: To override the preferred tape speed setting, press the SPEED button on the remote control repeatedly to toggle between SP and SLP choices. 3. Press the RECORD button on the remote control or VCR front panel to start recording. Press REC to set length 4. Repeatedly press the RECORD button to set up the recording duration. Each press of the RECORD button adds 30 minutes of recording time. The VCR automatically turns off after recording for the set time. To stop an XPR recording, press and hold the STOP button on the remote control or VCR front panel for several seconds until STOP appears on the VCR on-screen display. 32 Chapter 4 15708270 (VR661HF)(E) 07 Ftrs 32 2/7/01, 4:56 PM TIMER RECORDINGS 1 Create a New Program 2 Review Existing Progs. 3 Use VCR Plus+ Code 0 ExitHow often should this program record?
1 One time 2 Daily (every day) 3 Weekdays (M-F) 4 Weekly (once per week) 0 Cancel Program 1 has been saved Remember to insert a recordable tape and turn the VCR off before the program start time. Press MENU to continue VCR Features Timer Recording You can program up to eight different broadcasts to be recorded. Notes In order for a timer recording to work:
The VCRs clock must be set correctly. Insert a tape with its safety tab in place and enough tape to record the program. If youve set up the VCR for a cable box for all channels, the output of your cable box appears in the channel item of the Timer Recording menu. PROGRAMS OVERLAP appears if two programs whose times overlap are entered. TIMER appears in the display when you turn off the VCR and a timer recording has been set. TIMER flashes if there is no tape in the VCR when a timer recording has been set and the unit is turned off. For a cable box or satellite receiver, turn it on and tune it to the channel you want to record before the recording is to begin. To Set Up to as Many as Eight Timer Recording Programs:
1. Press the MENU button to display the VCR MAIN MENU. 2. Press the 2 button to choose TIMER RECORDINGS. 3. Press the 1 button to choose Create a New Program. 4. Select how often you want the program to record. 5. Enter the data for the program with the number buttons. The data includes the channel number (press INPUT to select the Video Line Input if using A/V jacks to connect the VCR to the TV), and start and end times (including AM or PM). The start date is automatically entered based on the VCR clock. Both the recording date and speed can be changed. 6. Review the information to make sure it is correct. 7. Press the MENU button to save. Stopping a Timer Recording To stop or cancel a timer recording in progress (even an Express Recording):
Press and hold the STOP button for several seconds until STOP appears in the on-screen display. Program 1 (One time) Channel 104 Cable Start Time 12:00 AM End Time 01:30 AM Start Date 11/16/01 Fri Tape Speed SLP Press CLEAR to erase Press MENU for next prog Reviewing and Clearing Programs To review programs that you have already set up:
1. Press the MENU button to display the VCR Main Menu. 2. Press the 2 button to choose TIMER RECORDINGS. 3. Press the 2 button to choose Review Existing Progs. 4. Press CLEAR to erase or MENU to see the next saved timer recording program. Chapter 4 33 15708270 (VR661HF)(E) 07 Ftrs 33 2/7/01, 4:56 PM VCR Features VCR Plus+ SILVER System The VCR Plus+ SILVER system makes VCR set up easier by setting and updating the clock and channel list for you automatically. During the first-time QuickSet Guide setup, the VCR prompts you to enter your zip code. Soon after, the VCR clock will set itself and your VCR Plus+ system channel list will be input for you. Time, date, and VCR Plus+ system information are downloaded from participating TV stations over your antenna or cable system. Time and date information are updated each time the VCR is turned off (and after every power interruption). So, when your TV stations or cable company update their lineups, your VCR will get the most current channel list automatically, freeing you from having to manually change the channel list yourself. If your VCR Plus+ SILVER system fails to download the proper information for any reason, you can always manually map the channels. You can also turn off AUTO VCR Plus+ if you keep getting prompts about multiple cable services by pressing the 2 button in the VCR Plus+ SETUP menu. VCR PLUS+ SETUP Last automatic setup was unsuccessful. Would you like to:
1 Try again 2 Finish setup manually 3 Cancel the auto setup Turning ON or OFF the Auto VCR Plus+ download If the automatic VCR Plus+ download continuously fails for any reason, you will see the prompt to the left. If you decide to turn off Auto VCR Plus+ all together, you can do this by:
1. Press the MENU button on the remote control to access the VCRs MAIN MENU 2. Press 4 to access the CHANNELS menu. 3. Press 4 to access the VCR Plus+ Setup menu. 4. Pressing 1 will take you to a screen to manually map VCR Plus+ channels. Pressing 2 will toggle between Auto VCR Plus+: ON or OFF. Make sure this feature is turned off if you continually get fail to download prompts and map the channels manually. VCR PLUS+ SETUP 1 Set channel lists 2 Auto VCR Plus+:
ON VCR Plus+ data was not found. 0 Exit VCR Plus+ and PlusCode are registered trademarks of the Gemstar Development Corporation. The VCR Plus+ system is manufactured under the license from Gemstar Development Corporation. 34 Chapter 4 15708270 (VR661HF)(E) 07 Ftrs 34 2/7/01, 4:56 PM VCR Features Mapping VCR Plus+ Channels Manually Using the VCR Plus+ SILVER system can make taping timer recordings for cable or off-air antenna easier. If your VCR Plus+ SILVER system setup failed during the QuickSet, then you will need to map the channels for your local service manually. A worksheet and abbreviated codes for typical cable services in the U.S. and Canada are provided. 1. Press the MENU button to display the VCR MAIN MENU. 2. Press the 4 button to choose CHANNELS. 3. Press the 4 button to choose VCR Plus+ Setup. 4. Press 1 to display the Set Channel Lists menu. 5. Enter the data following the on-screen directions using your worksheet. VCR PLUS+ SETUP 1 Set channel lists 2 Auto VCR Plus+:
ON VCR Plus+ data was not found. 0 Exit VCR+ Channel My Channel 5 --
4 --
3 -> -> -> --
2 --
1 --
Use CH+/- to select Press 0-9 to change Press MENU to save VCR+ Channel My Channel 5 46 4 --
3 -> -> -> 23 2 --
1 --
Use CH+/- to select Press 0-9 to change Press MENU to save
(Screen shown is for an example only.) Chapter 4 35 15708270 (VR661HF)(E) 07 Ftrs 35 2/7/01, 4:56 PM VCR Features Two-Digit VCR Plus+ System Channel Numbers for Cable TV (USA List) 35 ................... American Movie Classics 39 ........................ Arts &-Entertainment 57 ......................... Black Entertainment 54 .................................................. Bravo 42 ......................... Cable News Network 45 ............................................. Cinemax 98 .......................................... Cinemax 2 37 ..................... The Discovery Channel 53 ..........................The Disney Channel 63 ..................Entertainment Television 34 ........................ESPN Sports Network 47 .......................... The Family Channel 33 .............................. Home Box Office 95 ........................... Home Box Office 2 96 ........................... Home Box Office 3 51 ..................... The Learning Channel 46 .............................................. Lifetime 58 ...........................The Movie Channel 48 ................................ Music Television 49 ......................The Nashville Network 38 ...................................... Nickelodeon 64 ........................... Nostalgia Television 99 ........................... Quality Value Cable 41 ........................................... Showtime 97 ........................................ Showtime 2 59 .................................. Sports Channel 52 ............... Turner Network Television 44 ..................................... USA-Network 62 ....................................... Video Hits 1 93 .............................. Viewers Choice 1 94 .............................. Viewers Choice 2 55 .................................... WGN Chicago 43 .................................... WTBS Atlanta 60 .............................. WWOR-New York Two-Digit VCR Plus+ System Channel Numbers for Cable TV (Canadian List) 67 .................. Allarcom Pay Television/
Superchannel 44 ........................ Arts & Entertainment 72 ........................ Cable News Network-
Headline News 61 ......................... Cable News Network 70 ............... Canadian Home Shopping Network 56 ..................................... Canal Famille 69 ......................... Cathay International Television Inc. 68 ................. Chinavision Canada Corp 60 ..................Country Music Television 63 ................................. Family Channel 62 ........................................ First Choice 96 ................................ First Choice Two 97 ............................ First Choice Three 99 ............................... First Choice Four 90 .......................... House of Commons 91 .......................... La Chaine Francaise 51 ..................... The Learning Channel 65 ............... MeteoMedia/The Weather Network 48 ......................... MuchMusic Network 55 .......................................MusiquePlus 52 ............................. Nashville Network 73 ................................ Newsworld/CBC 53 ......................... Le Reseau des Sports 43 .......................... The Sports Network 64 ....................................... Super Ecran 37 ....................................Super Ecran B 98 ................................... Super Ecran C 66 ............................... Telatino Network 46 .................................... TV5 Montreal 92 .............................. Viewers Choice 1 93 .............................. Viewers Choice 2 94 .............................. Viewers Choice 3 95 .............................. Viewers Choice 4 71 .......................... Vision TV: Canadas Faith Network 38 ...................... Youth TV, Canada Inc. Note: Refer to your local TV program listings for a complete VCR Plus+ channel list for your viewing area or contact your cable company. Using the list may save you some time. 36 Chapter 4 15708270 (VR661HF)(E) 07 Ftrs 36 2/7/01, 4:56 PM VCR Features VCR Plus+ System Worksheet Broadcast or Cable-TV Station Name HBO ESPN VCR Plus+ System Channel Number**
Channel Number You Receive the Station On*
33 34
*Check your local or cable listings for the channel number you receive this station on.
**Check your local listings for broadcast or VCR Plus+ channel number assigned. Chapter 4 37 15708270 (VR661HF)(E) 07 Ftrs 37 2/7/01, 4:56 PM VCR Features Recording Broadcast Stereo TV or SAP
(Second Audio Program) Some TV programs are broadcast with stereo audio or SAP (Second Audio Program). 1. Turn on the TV and tune it to the VCR viewing channel (either 03, 04, or the TVs Video 2. 3. Line Input). Insert a tape with its safety tab in place. If your VCR viewing channel is 3 or 4, make sure the VCR indicator appears in the front display. If not, press the TVVCR button on the remote control to turn it on. 4. Press the SPEED button on the remote control if you want to override the preferred Tape Speed setting. The tape speed indicator appears on the TV screen. 5. 6. Select the channel or Video Line Input to be recorded. Set the Reception: STEREO/MONO/SAP feature for the type of audio you want to record. 7. Press RECORD to start recording. 8. Press STOP when finished. CABLE BOX or ANTENNA IN OUT PLAYBACK VCR RECORDING VCR AUDIO IN OUT ANT. IN R L R L VIDEO AUDIO IN OUT VIDEO RF OUT CH 3 4 ANT. IN RF OUT CH 3 4 Copying and Editing Tapes Using Two VCRs Use one VCR as the playback VCR and the other as the recording VCR. 1. Turn on the TV and VCRs. 2. Tune the TV to the VCR viewing channel (either 03, 04, or the TVs Video Line Input). 3. If you connected your VCR using the ANT. IN and RF OUT jacks, tune the recording VCR to channel 3 or 4whichever is selected on the back of the playback VCR. If you have connected your VCR using the A/V jacks, press INPUT on the recording VCRs remote control to select the Video Line Input. Select L1 for the jacks on the back of the VCR or L2 for the jacks on the front. 4. Insert the tape you want to copy into the playback VCR. Insert a tape with its safety tab in place into the recording VCR. 5. Press PLAY on the playback VCR to begin playback. When you reach the point on the tape or program where you want to begin copying, press the PAUSE button. You may need to adjust the tracking. 6. Press the RECORD button, then press PAUSE on the recording VCR. TO TV 7. Press the PAUSE buttons on both VCRs at the same time to begin copying the tape. Caution:
8. To edit segments that you do not want to copy:
The unauthorized recording of satellite broadcasts, television programs, or other copyrighted materials may infringe the rights of others. Press PAUSE on recording VCR to pause copying. Locate the next segment you want to copy on the playback VCR by using FWD, REV, and PLAY, and then press PAUSE. Press PAUSE on both VCRs at the same time to resume copying. 9. Press STOP on both VCRs when finished. 38 Chapter 4 15708270 (VR661HF)(E) 07 Ftrs 38 2/7/01, 4:56 PM VCR Features Picture Search Options The basic way to search during playback is using the remote controls FORWARD or REVERSE buttons (FWD and REV on the VCR). This section contains several other options available for searching a tape. Insert Tape:
Dont forget to insert a recorded tape when using the search features. Forward and Reverse Search You can search a tape during playback either forward or reverse in direction. Note: Sound is turned off during picture search. 1. Press the FORWARD button to search forward or the REVERSE button to search backwards. 2. Press the FORWARD , REVERSE, or PLAY button to return to normal playback. Slow Motion You can view a tape during play or play-pause mode using Slow Motion search. 1. In pause mode, press the FORWARD (FWD) or REVERSE (REV) button to start slow-motion playback. 2. Press the FORWARD button to increase or the REVERSE button to decrease the search speed. 3. Use the TRACKING + or buttons to remove any streaks from the picture. 4. Press the PLAY button to return to normal playback. The VCR switches automatically from slow-motion playback to stop after a few uninterrupted minutes. Frame Advance Frame Advance lets you view single-frame action during playback. 1. While playback is in progress, press the remote controls PAUSE button
(PLAY/PAUSE on the VCR) to freeze the action. 2. Press the F. ADV button on the remote control each time you want to view the next frame of the recording. 3. Press the PAUSE or PLAY button on the remote control (PLAY/PAUSE on the VCR) to return to normal playback. Chapter 4 39 15708270 (VR661HF)(E) 07 Ftrs 39 2/7/01, 4:56 PM VCR Features Index Search The VCR has a VHS Index Search System that automatically records index marks on the tape every time you start a recording. During playback you can locate the program you want to play by the number of index marks or by scanning. The VCR will search forward or reverse from the location you are at on the tape. INDEX SEARCH Press REV or FWD to begin scanning OR enter a specific index number
Press SEARCH to exit GO-TO SEARCH Current tape counter is 2:17:25 Press REV or FWD to go to -:--:00 Press SEARCH to exit To Activate Index Search:
1. While playing back, press the STOP button to freeze the action. 2. Press the SEARCH button on the remote control to display the INDEX SEARCH screen on the TV screen. 3. If you want to search through a certain number of index marks, press two number buttons to enter the number of marks you want to search. Press the CLEAR button on the remote control to correct an entry. 4. Press the FORWARD button to search forward or the REVERSE button to search in reverse. The VCR will locate your index mark and begin playback. If you did not enter a specific index number, the VCR will locate the next index mark and begin playback. 5. Press STOP to stop Index Search. Notes Certain index marks may be missed by the VCR including:
Marks too close to the current location of the tape. Those at the beginning of a recording lasting five minutes or less. Index marks that start at the beginning of the tape. Go-To Search The Go-To Search feature enables the VCR to quickly locate a counter reading anywhere on the tape. When the VCR locates the counter reading, it will begin playback. 1. Press the STOP button. 2. Repeatedly press the SEARCH button on the remote control until the GO-TO SEARCH menu appears on the screen. 3. Use the number buttons to enter the hour and/or minute of the counter reading you want the VCR to go to. If necessary, press the CLEAR button on the remote control to correct an entry. 4. Press the FORWARD button to search ahead or the REVERSE button to search behind. 5. Press the STOP button to end a Go-To search. 40 Chapter 4 15708270 (VR661HF)(E) 07 Ftrs 40 2/7/01, 4:56 PM VCR Features Commercial Advance This feature uses patented technology to detect and mark most commercials on your tape for any recording that is more than 15 minutes long. Once recording is finished, the VCR rewinds the tape to the beginning of the recording and determines where the commercials are located. It then marks the beginning and end of the detected commercial segments, and when finished, returns the tape to the end of the recording. It does not erase commercials from the tape. During playback, the VCR automatically skips the detected commercial segments, or you can chose to manually skip them. This feature reduces three minutes of commercials to approximately 8-12 seconds of fast forwarding in the SLP speed. You can select a background display of blue or see the video as the commercials are skipped. Because television signals do not indicate where commercials are located, this feature finds and marks them through a set of formulas based on how television is broadcast today. Since television stations broadcast differently and insert their own commercials, you may experience some variations in this features effectiveness. Station promotions, identifications, and announcements are not considered commercials, but might be skipped. For more information, see Questions and Answers About COMMERCIAL ADVANCE in the Reference section. All of the COMMERCIAL ADVANCE features are accessed through the COMMERCIAL ADVANCE menu. 1. Press MENU to display the VCR MAIN MENU. 2. Press 6 to display the PREFERENCES menu. 3. Press 8 to display the COMMERCIAL ADVANCE menu. PREFERENCES 1 Remote Control: VCR1 2 Auto Play:
3 Auto TV/VCR:
4 EnergySaver:
5 Front Panel:
6 Tape Speed:
7 Set Auto Repeat 8 COMMERCIAL ADVANCE 0 Exit ON ON 2:00 AUTO SLP Now you can select one of the COMMERCIAL ADVANCE features. COMMERCIAL ADVANCE 1 Marking:
2 Playback:
3 Display:
ON AUTO Blue COMMERCIAL ADVANCE Marking Press 1 to turn commercial Marking ON or OFF. Select ON, and the VCR will mark commercials within approximately 30 seconds for the following types of recording:
Timer, Timer with VCR Plus+, or Express Recording Sets the VCR to automatically mark commercials after the power is tuned off. Recording Allows the VCR to prompt you to mark the commercials when youve stop the recording. Select OFF and the VCR will not mark the commercials. 0 Exit The VCR is waiting to mark commercials in the program you recorded. 1 Mark them now 2 Mark them later 3 Don't mark commercials The VCR will begin marking in 30 seconds... Chapter 4 41 15708270 (VR661HF)(E) 07 Ftrs 41 2/7/01, 4:56 PM VCR Features COMMERCIAL ADVANCE 1 Marking:
2 Playback:
3 Display:
ON AUTO Blue COMMERCIAL ADVANCE Playback Press 2 to switch between Playback: AUTO and MANUAL. Select AUTO to have the VCR automatically advance through the blocks of marked commercials. 0 Exit It works with most 30, 45, and 60-second commercials. Timer Recordings and COMMERCIAL ADVANCE When using Timer Recordings to tape two back-to-back programs on the same channel, you may want to program each show separately so that the beginnings and ends of programs are not automatically skipped by COMMERCIAL ADVANCE. A commercial group starting with the first two minutes or last two minutes of a recording will not automatically be skipped. A commercial will not be skipped if a recording starts in the middle of a commercial segment, one isolated commercial is shown without others, or a commercial is longer than one minute. Press FWD on the VCR (FORWARD on remote) to scan through the commercial. Part of a recorded program may be skipped if the program segment is between commercials and less than one minute or there are frequent dark and quiet scenes. Select MANUAL and the VCR wont advance through the blocks of marked commercials until you press SEARCH. To Override Automatic Skipping If part of the program youve recorded is passed over, you can temporarily override the automatic skipping feature of COMMERCIAL ADVANCE. 1. While the desired portion of the program is being skipped, press the PLAY or STOP button on the remote control or VCR front panel. 2. To view the portion of the tape that was skipped, rewind the tape back to a position before the skipping started using the REVERSE (REV) button. 3. Press the PLAY button to start playback. The portion of the tape will no longer be skipped. Automatic skipping will be enabled again after the VCR detects the end of the commercial group. Notes: If you press SEARCH during playback of material other than commercials, the VCR advances to the end of the next marked commercial block and resumes playback. The VCR resumes playback when it reaches the end of the marked commercials. COMMERCIAL ADVANCE Display Press 3 to switch between Display: BLUE or VIDEO. Select BLUE to display a blue background when the VCR advances through the block of marked commercials. Select VIDEO to display the recorded video when the VCR advances through the block of marked commercials. 42 Chapter 4 15708270 (VR661HF)(E) 07 Ftrs 42 2/7/01, 4:56 PM Movie Advance MOVIE ADVANCE helps you locate certain parts of prerecorded movies (rented or purchased). This feature works two ways: 1) you can go to the beginning of the movie, or, 2) you can skip from one preview to the next. MOVIE ADVANCE works only on tapes with the safety tab removed recorded in SP speed. VCR Features MOVIE ADVANCE What type of tape is this?
1 Purchased/Rented Movie 2 Home Recording 3 Other 1. To select MOVIE ADVANCE, insert a tape with its safety tab removed and press the SEARCH button on the remote control. 2. Press 1 if the tape is a purchased or rented movie, press 2 if its a recording made at home, or press 3 if its something else, you dont know, or you do not want to select MOVIE ADVANCE. Pressing 2 or 3 gives the same response and takes you to a different search feature. If you accidentally make a wrong selection, press STOPEJECT on the VCR (STOP on remote) and reinsert the tape. Press SEARCH. Press CLEAR to cancel If you press 1, the MOVIE ADVANCE menu appears. MOVIE ADVANCE Would you like to go to the start of the movie or to the next preview?
1 Go to movie 2 Go to preview Press CLEAR to cancel 3. Press 1 to advance directly to the beginning of the movie or press 2 to view the first (next) preview. Press 1 to Go To Movie. The following screen appears with a blue background. When the movie is found, you will see a message reading The movie is ready. Press PLAY to start. Note: You can press the STOP button to cancel the MOVIE ADVANCE search. Press 2 to Go To Preview. The on-screen display will tell you that the VCR is looking for the start of the next preview. MOVIE ADVANCE When a preview is detected, the VCR cues it and begins playing. The movie is ready. Press PLAY to start. To Override the Show Previews Mode:
Press the SEARCH button while a tape is being searched. Pressing the SEARCH button while:
Press STOP to cancel The tape is reversing will begin searching for the start of the next preview or long commercial. The tape is searching forward for the next preview will reverse the tape back to the start current preview. Searching for preview The VCR is playing will advance the tape to the start of the next preview, long commercial, or the start of the movie (whichever comes first). Press SEARCH to reverse Press STOP to cancel Chapter 4 43 15708270 (VR661HF)(E) 07 Ftrs 43 2/7/01, 4:56 PM VCR Features Pro-Tect Plus Locking Feature To protect set timer recordings and to disable the VCR for use, the unit can be locked so that the buttons on the front panel or remote control wont work. To Lock: Press and hold either the remote controls ONOFF or VCR button until the front panel display flashes. To Unlock: Press and hold either the remote controls ONOFF or VCR button until the front panel display flashes for several seconds. Unlocking is the only way to turn on and use the VCR. Tracking Your VCR has automatic tracking which removes streaks and noise from the picture. Automatic tracking is activated when you insert a tape or turn on the VCR. Occasionally you may need to manually adjust tracking, especially if the tape was recorded on a different VCR. Use the TRACKING /+ buttons on the VCR front panel or remote control to remove streaks and noise. You can also use tracking when pausing a tape to reduce the noise of the stilled picture. When manually adjusting the picture, automatic tracking is turned off. To turn automatic tracking back on, eject the tape and reinsert it. Note: Tracking has no effect when recording only during playback. Hours Minutes 0:30:00 Seconds Time Counter The time counter shows the actual time used when recording or playing back a tape. The time counter helps locate the beginning or end of recorded events. It resets to 0:00:00 whenever a tape is ejected from the VCR. For example, if you record a 30minute program at the beginning of a tape, rewind it, and then want to go to the end of the first program to start another recording:
1. Press the INFO button twice to display only the time counter. 2. Press the CLEAR button to reset the time counter to 0:00:00. 3. Press the remote controls FORWARD button (FWD on the VCR) to advance a tape until the time counter reads 0:30:00. 4. Press the STOP button. This is the approximate end of a 30-minute program
(you may want to press the PLAY button to verify). When the tape is cued correctly, you can begin recording. 5. Press the INFO button to remove the time counter from the screen and return to the normal display mode. 44 Chapter 4 15708270 (VR661HF)(E) 07 Ftrs 44 2/7/01, 4:56 PM VCR Features On-Screen Displays Pressing the INFO button displays the status of the VCR (Stop, Play Record, etc.) as well as the channel number, time counter position, date, time, and tape speed on the TV screen. Note: The date and time must be set before they can be displayed. 1 2 3 Stop Ch 05 0:30:00 1. Press the INFO button to show the on-screen displays. The current time is displayed in the VCRs front panel. 11/18/01 Sun 1:30PM SLP On-screen display (times out) 0:30:00 Time counter only (does not time out) No displays will appear
(useful for dubbing) 2. Press INFO again to have only the time counter remain on the screen. The time counter is also displayed in the VCRs front panel. 3. Press INFO again to have no displays appear on the TV screen. The time counter remains in the VCRs display panel. This is useful for dubbing tapes. 4. Press the INFO button again to return to the normal display. The current time is displayed in the VCRs display panel. Note: Turning off the VCR also resets the displays. Chapter 4 45 15708270 (VR661HF)(E) 07 Ftrs 45 2/7/01, 4:56 PM VCR Features AUDIO 1 Reception: STEREO 2 Tape Playback: HI-FI Audio Set-Up Features Your VCRs audio setup features affect both tape playback and recordings. The features in this section are accessed through the AUDIO menu. 0 Exit To Display the Audio Menu:
1. Press the MENU button to bring up the VCR MAIN MENU. 2. Press 7 to choose AUDIO. With the AUDIO menu displayed, you are ready to select an item from the menu to set up. Reception Some TV programs are broadcast with stereo audio or a Second Audio Program
(SAP) which offers a second language. The Reception feature lets you select the type of audio you want to record. Press 1 repeatedly to switch between Reception: STEREO, MONO, or SAP. STEREO used for normal or stereo broadcast TV recording. The HI-FI indicator lights on the VCR front panel when the VCRs tuned station is broadcasting in stereo. MONO used if the stereo signal is weak or the sound is too noisy. SAP used to hear/record a Second Audio Program instead of the normal audio on both the Hi-Fi and linear tracks. Tape Playback The VCR records the same audio on both the Hi-Fi stereo and linear tracks on the tape. Hi-Fi sound is recorded on separate left and right stereo channels. Monaural sound is recorded on the linear track. In the AUDIO menu, press the 2 button repeatedly to switch between Tape Playback: Hi-Fi, LINEAR, and MIX. To enjoy Hi-Fi sound, connect your VCR to a stereo television or amplifier/
receiver using the audio jacks. The Tape Playback feature lets you select which audio you play back. Hi-Fi use to play back sound recorded on the Hi-Fi tracks and for normal use. LINEAR use to play back the sound recorded on the linear monaural track, such as a Second Audio Program, or a dubbed voice-over. MIX used to play back the sound recorded on both the linear track and the Hi-Fi track, sound-on-sound. The Hi-Fi indicator lights when MIX is active. 46 Chapter 4 15708270 (VR661HF)(E) 07 Ftrs 46 2/7/01, 4:56 PM Chapter 5 Other Information Chapter Overview:
Troubleshooting COMMERCIAL ADVANCE Q&A Front, Rear, and Display Panel Diagrams Specifications Care and Cleaning Warranty Information Finding the TVs Video Line Input Advanced Connection Diagram Glossary Index Changing Entertainment. Again. 15708270 (VR661HF)(E) 08 Other 47 2/7/01, 4:56 PM 47 Other Information Troubleshooting Tips In this section, you will find answers to common recording, playback, and general VCR questions. Consulting with this section first when there is problem may help you answer common questions. General VCR Problems No power Check to make sure it is plugged into an operating outlet. Check to make sure your connections are correct. VCR does not respond to the remote control Check to make sure there are no objects between the VCR and the remote control. The remote controls batteries may need changing. You are not in VCR-controlling mode. Press the remote controls VCR button to control it. Theres poor or no picture for normal TV viewing Make sure the VCR indicator is off. Make sure the TV is switched to an active channel. Make sure the antenna connections are secure and correct. Rewind does not operate Check to make sure the tape is not already rewound. The clock shows an incorrect time or date There may have been a power interruption. Reset the VCRs time and date. Make sure the clock is set accurately (check AM/PM and date). Check the Daylight-Saving setting. The clock may have adjusted for Daylight-Saving Time. Time did not adjust for Daylight-Saving time. Check to make sure the Daylight-Saving Time feature is set correctly. The VCR makes noise when stopped The VCR is removing the tape from the playheads. This is normal. The head cylinder inside the VCR will continue to rotate for a few minutes after you put the VCR in the stop mode. Cannot select channels over 69 Cable channels over 69 can only be selected if Signal Type: CABLE/ANTENNA feature is set to CABLE. TIMER flashes on the VCR front panel display The clock is not set. Check to make sure there is a cassette in the VCR when a timer recording is set ad the power is turned off. On-screen menus appear in English, French, or Spanish Check the LANGUAGE feature for the preferred on-screen language. 48 Chapter 5 15708270 (VR661HF)(E) 08 Other 48 2/7/01, 4:56 PM Other Information Recording Problems Will not record Make sure there is a recordable tape in the VCR. Eject then reinsert the tape. Make sure the tape is not broken. Make sure the VCR is not in pause mode. Press PAUSE or PLAY to return to normal playback. Make sure the Pro-Tect Plus feature is not active. A VCR Plus+ system or timer recording was not made or the wrong program recorded Make sure the correct PlusCode programming number is entered. Make sure the program was entered correctly (the wrong channel or times may be entered). Make sure the cable box or satellite receiver was turned on when recording was to begin. There may have been a power interruption. Reset the time and date. Check to see if time and date are correct including AM/PM. Make sure the program did not exceed the tapes length or that the tape was not rewound beforehand. Make sure the VCR was turned off at the time recording started. Make sure there was a tape in the VCR with its safety tab intact. The VCR ejects tapes when the end is reached during a timer recording. Make sure the VCR Plus+ system setup was completed correctly. Will not record Make sure the tapes safety tab is intact. Make sure the VCR is not in Video Line Input mode. Press INPUT on the remote control to return to normal viewing. Playback Problems Snowy or no picture during playback Press the remote controls TVVCR button to activate VCR-controlling mode. VCR appears in the front panel display when active. Check the TV channel selected (3 or 4) to make sure it matches the channel selected with CH. 3/4 switch on the back of the VCR. Check to make sure the TVs fine tuning is correct for the channel selected. If you use A/V cables and jacks to connect the VCR to the TV, check all connections for snug and correct connections. Check to make sure the TV monitor is set to Video Line Input (see How to Find Your TVs Video Line Input in this section of the manual for detailed information). Try another tape. Some snow/streaks are normal during search, stop action, frame advance, and slow-motion playback. Chapter 5 49 15708270 (VR661HF)(E) 08 Other 49 2/7/01, 4:56 PM Other Information Streaks in picture during normal playback Press one of the TRACKING buttons to move streaks up or down for the best picture. Check to make sure the tape is of good quality and not worn out. Time counter not working or time counter not working in search modes The time counter does not advance during unrecorded portions of tape. When an unrecorded segment of tape is encountered, the time counter will hold its count until recorded material is detected again. A minus () will appear in front of the time if you rewind the tape farther back than a counter reading of 0:00:00. The time counter disappears during search; this is normal. Will not play Check to make sure there is a tape in the VCR. Try ejecting and reinserting the cassette. Check to make sure the tape is not broken. Check to make sure the VCR is not in pause mode. Press PAUSE or PLAY to return to normal playback. Check the Pro-Tect Plus feature. Will not Auto Channel Search active channels correctly Check to make sure the antenna connections are secure and correct. Check to make sure the Signal Type: CABLE/ANTENNA feature is set correctly. If Detect Automatically was selected for the Signal Type in the AUTO CHANNEL SEARCH menu, try using either CABLE TV or ANTENNA instead. May not be necessary if using a cable box for all channels. Contact your local cable company for more information. Tape plays back in slow motion Press PLAY to return to normal playback. Cassette with safety tab removed does not start to play automatically Check to make sure the AUTO PLAY ON/OFF feature is set to ON. Time counter disappears during searching This is normal. There is no stereo sound during playback Make sure the Tape Playback feature is set to Hi-Fi to hear stereo sound during playback. You must use A/V cables (not provided) and jacks to connect the VCR to the TV (or stereo) to hear true stereo sound during playback. The stereo Audio is too noisy The stereo signal is weak. Set the Reception: STEREO/SAP/MONO to MONO. Press either the TRACKING or + button to minimize picture noise. 50 Chapter 5 15708270 (VR661HF)(E) 08 Other 50 2/7/01, 4:56 PM Other Information Questions and Answers About Will commercials be scanned through only on playback of recordings?
Yes. The VCR rewinds and marks commercial segments after a recording is finished. How fast does this feature scan through commercial breaks?
In SLP tape speed, a 3-minute commercial break is scanned through in approximately 8-12 seconds. In SP, it takes about 25-35 seconds. Are commercials still recorded if I want to watch them?
Yes. The recorded program, including commercials, can be viewed by setting the Playback feature to MANUAL. What if the VCR scans forward through part of my program?
Press PLAy or STOP while the tape is being automatically skipped. rewind the tape back to a position before skipping started, then press PLAY.Automatic skipping will start again after the end of the commercial group is detected by the VCR. Once a recording has been marked, does COMMERCIAL ADVANCE work each time the tape is played?
Yes. If the Playback feature is set to AUTO, the marked commercials should be skipped each time the tape is played in a COMMERCIAL ADVANCE VCR. After marking commercials, is the tape left at the beginning or end of the recording?
The tape is left at the end of the recording so it is in position to begin additional programmed recordings. Does the marking process interfere with other programmed recordings?
No. If two or more recordings are programmed together without sufficient time to mark the first recording, marking will take place after all recordings are completed. What happens if the marking process is interrupted?
Marking can be interrupted to allow use of the VCR. Marking will resume again when the VCRs power is turned off as long as the tape has not been ejected from the VCR. Does COMMERCIAL ADVANCE work in all recording speeds?
Yes, COMMERCIAL ADVANCE works in SP and SLP. Will COMMERCIAL ADVANCE marked recordings work in non-Commercial Advance VCRs?
A COMMERCIAL ADVANCE marked recording will play in a non-Commercial Advance VCR, but commercials will not automatically be skipped. Chapter 5 51 15708270 (VR661HF)(E) 08 Other 51 2/7/01, 4:56 PM Other Information
. Front Panel AUDIO (LEFT and RIGHT) and VIDEO In Jacks Receives signals from another component (like another VCR or camcorder) when connected to the VCR using A/V jacks. Use the INPUT button to select L2 to record from these jacks (L1 indicates the rear panel A/V jacks being active). CHANNEL TRACKING Up and Down Adjusts the image quality by removing picture noise and distortion. FWD Forwards the tape when the VCR is stopped. Searches the picture forward during playback. Starts slow motion during play-pause and increases slow-motion speed. PLAYPAUSE Plays a tape. Pauses action for viewing during playback. Pauses recording to prevent recording of unwanted scenes. POWER Turns the VCR on or off. RECORD Starts VCR recording. Also used for Express Recording (XPR). REV Rewinds the tape when the VCR is stopped. Searches the picture in reverse during playback. Starts slow motion during play-pause and decreases slow-motion speed. STOP/EJECT A single press of this button stops normal VCR functions such as record, playback, rewind, fast-forward, or pause. If pressed a second time, this button ejects an inserted tape. TVVCR Switches the picture signal so that it either comes from the VCR or the TV cable/antenna signal. 52 Chapter 5 15708270 (VR661HF)(E) 08 Other 52 2/7/01, 4:56 PM Other Information VCR REC AM Display Panel Clock/Counter Displays current time, time counter, tape speed, or channel numbers when switching channels. FUNCTION DISPLAYS:
dn & Ld (Down and Load) Front panel display alternates between these two words when time data is being downloaded. REC (Recording indicator) The VCR is recording. REC flashes on the front panel display when a recording is paused.
(Timer indicator) Displayed when an Express Recording (XPR) or timer recording is under way or when the VCR is set for a timer recording and the power is turned OFF. TIMER flashes on the VCR front panel when a timer recording is set and no tape is inserted in the VCR. VCR indicator VCR and TV viewing modes. Indicates that the VCR is in VCR-display mode. Press the TVVCR button to toggle between VCR indicator is ON when the picture displayed is from the VCRs tuner. VCR indicator is OFF when the picture displayed is from the TVs tuner. Chapter 5 53 15708270 (VR661HF)(E) 08 Other 53 2/7/01, 4:56 PM Other Information AUDIO ANT. IN R L OUT IN VIDEO CH. 3 4 RF OUT Back Panel CH. 3/4 switch Determines the channel to which the TV must be tuned in order to see the VCRs picture. Not used when connecting the VCR to the TV using A/V cables. AUDIO (LEFT and RIGHT) and VIDEO IN jacks Receives signals from another component, such as another VCR or camcorder, when connected to these jacks. Use the INPUT button on the VCR or remote control to select the rear video line input A/V jacks (L1) to record from these jacks. AUDIO (Right and Left) and VIDEO OUT jacks component, like a TV or another VCR, when the other component is connected to these jacks. Sends signals from the VCR to another ANT. IN jack Receives a signal from an antenna or cable system when the VCR is attached with RF cables. RF OUT jack Passes the VCRs signal to a TV using the supplied RF cable. 54 Chapter 5 15708270 (VR661HF)(E) 08 Other 54 2/7/01, 4:56 PM Other Information Specifications Format:
VHS Record/Playback System:
Video: 4-head Audio: VHS Hi-Fi record/playback system Video Signal System:
EIA standard: NTSC color Antenna:
Tuner:
75-ohm external VHF/UHF combined antenna terminal USA:
Canada:
181 channels capability*
(125 cable channels) 178 channels capability*
(122 cable channels) Type:
AutoProgramming frequency synthesis Power Requirement:
120V AC, 60 Hz Power Consumption:
17 watts (standby < 3 watts) Dimensions:
Weight:
Other:
3.64 inches high (91 mm) 14.4 inches wide (360 mm) 9.4 inches deep (230 mm) 6.4 pounds (2.9 kg) Automatic head cleaner Storage Temperature Range:
- 22F to +149F
(-30C to +65C) Operating Temperature Range:
+41F to +104F
(+5C to +40C)
*Check your cable companys compatibility requirements. Cleaning the VCR Use a soft cloth or dusting attachment of your vacuum cleaner to dust your VCR. Remove dust from the ventilation holes on the top, back, sides, and bottom of the VCR and all connected components. Plastic surfaces are easily scratched and can be marred by alcohol and various solvents. Avoid excessive use of oil-based furniture polishes since the materials used in the cabinet will accumulate more dust. We recommend using a nonabrasive, antistatic cleaner and polisher.If part of the program is skipped, rewind the tape to the beginning of the skipped program segment and press PLAY. Chapter 5 55 15708270 (VR661HF)(E) 08 Other 55 2/7/01, 4:56 PM Other Information RCA VCR Limited Warranty What your warranty covers:
Any defect in materials or workmanship. For how long after your purchase:
90 days for labor charges. One year for parts. The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm, whichever comes first. What we will do:
Pay any Authorized RCA VCR Service Center the labor charges to repair your VCR. Pay any Authorized RCA VCR Service Center for the new or, at our option, refurbished replacement parts required to repair your VCR. How you get service:
Take your VCR to any Authorized RCA VCR Service Center. To identify your nearest Authorized RCA VCR Service Center, ask your dealer, look in the Yellow Pages, or call 1-800-336-1900. Show the Authorized Service Center Representative your evidence of purchase date or first rental. Pick up your VCR when repairs are completed. What your warranty does not cover:
Customer instruction. (Your Owners Manual clearly describes how to install, adjust, and operate your VCR. Any additional information should be obtained from your dealer.) Installation and related adjustments. Signal reception problems not caused by your VCR. Damage from misuse or neglect. Cleaning of video/audio heads. Batteries. A VCR that has been modified or incorporated into other products or is used for institutional or other commercial purposes. A VCR purchased or serviced outside the U.S.A. Acts of nature, such as but not limited to lightning damage. Product Registration:
Please complete and mail the Product Registration Card packed with your VCR. It will make it easier to contact you should it ever be necessary. The return of the card is not required for warranty coverage. How State Law relates to warranty:
This warranty gives you specific legal rights and you also may have other rights that vary from state to state. If you purchased your VCR unit outside the United States:
This warranty does not apply. Contact your dealer for warranty information. Service calls which do not involve defective materials or workmanship are not covered by this warranty. Costs of such service calls are the sole responsibility of the purchaser. 56 Chapter 5 15708270 (VR661HF)(E) 08 Other 56 2/7/01, 4:56 PM Other Information Finding the TVs Video Line Input You need to tune your TV to the video line input if you are using the VCRs Audio/Video (A/V) OUT jacks to connect to the TVs A/V input jacks. You must select the TVs video line input before you can see the VCRs menus, the cable/antenna reception, and the content thats on a tape. The video line input for TVs varies by brand and model. Below are some steps to try to find your TVs video line input:
If your TV brand is RCA, GE, or Proscan, press the TV button on the VCRs remote control, then press the INPUT button. If you have another brand of TV, see the chapter Using the Remote Control to see if the VCRs remote can be programmed to control your TV. If so, once completed, follow the step above. If those options do not work, try the following ideas. You might access the video line input by:
Pressing a button on the TVs remote control (see the table below). TV Button ONOFF TV VCR REVERSE PLAY FORWARD RECORD STOP PAUSE INFO C HAN SEARCH L O V V O L MUTE CHA N GO BACK CLEAR MENU SPEED Selecting a specific channel from the TVs on-screen menu system (see 1 4 7 IN PUT 2 5 8 0 3 6 9
VC R TV TRACKING F.ADV INPUT Button the table below). Tuning directly to the video line input by selecting a specific channel number (see the table below) Going through all available channels by pressing the channel up or down buttons on the TV or its remote control. Common Video Line Input scenarios:
Video Input Channel Variations Button/Switch on the TV Button on the TV Remote Channel Number VIDEO SIGNAL VID 1 VID 2 S-VID S-VIDEO VID 1 LINE VID VIDEO S-VID INPUT S-VIDEO SOURCE AUX 00 90 91 92 93 VID 1 VID 2 Chapter 5 57 15708270 (VR661HF)(E) 08 Other 57 2/7/01, 4:56 PM Other Information Advanced Connection TV + VCR + Satellite Receiver Using A/V and RF Coaxial Cables Note: Your satellite receiver and television back panels may not look exactly like the models shown here. This connection can also be used for a cable box. 1. Connect the VCR to the TV A. Connect one end of the supplied RF coaxial cable to the RF OUT jack on the back of the VCR and the other end to the TVs antenna input jack. B. Connect the A/V cables. Connect audio cables to the VCRs R and L Audio OUT jacks and the other ends to the TVs corresponding audio input jacks (if your TV only has one audio input jack, use the VCRs L audio jack to connect). Connect one end of the video cable to the VCRs VIDEO OUT jack, and the other end to the TVs video input jack. 2. Connect the satellite receiver to the VCR A. Connect one end of a second RF coaxial cable (not included) to the VCRs ANT. IN jack. Connect the other end to the satellite receivers antenna output jack. B. Connect the A/V cables. Connect audio cables to the VCRs R and L audio IN jacks and the other ends to the satellite receivers audio output jacks. Connect one end of the video cable to the VCRs VIDEO IN jack, and the other end to the satellite receivers video output jack. V T V C R a t e llit e S TV VCR VIDEO AUDIO R L / MONO L IN OUT S-VIDEO 1B CABLE/
ANTENNA 1A AUDIO ANT. IN R L RF OUT CH 3 4 OUT IN VIDEO SATELLITE RECEIVER 2B OUT VIDEO L R S-VIDEO IN FROM ANT OUT TO TV 2A CH3 CH4 SATELLITE IN 3 From Cable or TV Antenna 4 From Satellite 3. Connect a TV antenna or cable feed to the satellite receiver If you have cable or a standard TV antenna, connect its RF coaxial cable (not included) to the antenna input jack on the satellite receiver. 4. Connect the satellite antennas cable to the satellite receiver Connect the satellite antennas RF coaxial cable feed (not included) to the receivers satellite input jack. Note: To hear stereo output from the satellite receiver, you must use the TVs video line input channel. RF coaxial cable only carries mono sound. 58 Chapter 5 15708270 (VR661HF)(E) 08 Other 58 2/7/01, 4:56 PM Other Information Glossary A/V Jacks & Cables Commonly called RCA-type cables. Improves picture and sound quality over RF Coaxial cables. A/V cables are required for stereo audio. EnergySaver Automatically turns the VCR off after a user-defined period of inactivity. Express Recording (XPR) A method of timer recording which tapes for a set period of time using 30-minute increments. Pro-Tect Plus Allows the VCR to be disabled so that the front panel and remote control buttons dont work. Useful for protecting timer recordings. QuickSet Guide An first-time use, interactive, menu-based system that walks you through several setup steps in a series of questions. The QuickSet Guide is also available in the VCRs Main Menu. SAP (Second Audio Program) A second sound track that may be included with a stereo broadcast. Usually used for foreign language dubs of programs. VCR Channels List The active list of channels available to the VCR using the CHANNEL +/- buttons. XPR See Express Recording above. Chapter 5 59 15708270 (VR661HF)(E) 08 Other 59 2/7/01, 4:56 PM Index Index A ADD/REMOVE CHANNELS screen 18 Audio features, set up 46 AUDIO IN jacks 58 AUDIO menu 46 Audio/Video (A/V) jacks 17, 52, 54 AUDIO/VIDEO jacks 26 Auto channel search 17 Auto clock feature 19 Auto play feature 13, 21 Auto TV/VCR feature 22 Automatic rewind 13 Automatic tracking 13, 44 B Back panel jacks 54 Basic recording 13 Batteries (remote control) 11 Broadcast stereo TV recording 38 C Cable box setup 16 Cables positioning 6 CHAN buttons 27 CHANNEL buttons 17, 26 Channels, adding/removing 18 CHANNELS menu 16, 18, 35 CLEAR button 26, 27, 40 Clock display 53 COMMERCIAL ADVANCE 41 Display 42 Marking 41 Playback 42 questions and answers 51 Component buttons 26 Connections 8 Controls back panel 54 front panel 52 Copying tapes 38 D Date and time setting 19 Design specifications 55 Display panel 53 Displays, on screen 45 E EJECT button 13 EnergySaver feature 22 Express Recording (XPR) 2, 32 F F. ADV button 26, 39 FORWARD button 13, 39 Frame advance 39 Front panel controls 52 FWD button 38, 39, 44 G Glossary 59 GO BACK button 26, 27 I Index search 40 Indicators in display panel 53 INFO button 26, 27, 44 INPUT button 27 INPUT button 26, 33, 38, 57 L L1 indicator 38 L2 indicator 38 LANGUAGE menu 16 Locking feature 44 M MENU button 16, 26, 33, 35, 41, 46 MOVIE ADVANCE Overriding 43 Movie Advance 43 MUTE button 27 N Number buttons 20, 26, 27 O OFF button 26, 27 ONOFF button 44 On-screen displays 45 Overheating 6 P PAUSE button 13, 27, 38 Picture search options 39 PLAY button 13, 27, 38 PLAY/PAUSE button 39 POWER button 13 Power surges 6 PREFERENCES menu 21, 41 Pro-Tect Plus locking feature 44 Q QuickSet guide 16 R REC display 53 Reception: STEREO/MONO/SAP feature 38, 46 RECORD button 13, 27, 32, 38, 52 60 Chapter 5 15708270 (VR661HF)(E) 08 Other 60 2/7/01, 4:56 PM Index VCR Plus+
channel lists 36 channel worksheet 37 VCR Plus+ SILVER System 34 VCR Plus+ System Worksheet 37 VCR viewing channel 11, 13 Video Input Channel 57 VOL buttons 27 Recording basic 13 broadcast stereo TV 38 copying /editing tapes 38 Express (XPR) 2, 32 SAP 38 speeds 23 timer 33 Remote component buttons 26 TV function buttons 27 Remote, batteries 11 Removing/adding channels 18 REV button 27, 38, 52 REVERSE button 13, 39 Reviewing timer programs 33 Rewind, automatic 13 RF OUT jack 54 S Safety tab 13, 21 SAP 38 Search forward 39 reverse 39 SEARCH button 27, 40 Set up auto play feature 21 auto TV/VCR feature 22 cable box 16 Daylight-Saving 20 front panel 22 language feature 16 PREFERENCES menu 21 tape speed feature 23 time and date 19 time zone 19 using menu system 16 Signal type changing 18 selecting 18 Slow motion 39 Specifications 55 Speed SLP 23 SP 23 SPEED button 13, 23, 27, 32 Speeds, recording 23 STOP button 13, 27, 32, 38, 52 T Tab, safety 13 Tape eject 13 Tape playback feature 46 Tape playback: HI-FI/LINEAR/MIX 46 Tape speeds 23 Time and date 19 Time counter 44 Time counter display 45 Time display on TV 45 TIME menu 19 Time setting Daylight-saving 20 set time zone 19 Timer programs clearing 33 reviewing 33 Timer recording 33 stopping 33 TRACK buttons 27 Tracking 44 TRACKING buttons 13, 39, 44 Troubleshooting 48 TV button 26, 57 TV function buttons 27 TVVCR button 22, 27, 38 V VCR connecting 8 VCR button 26 VCR function buttons 26 VCR indicator 38, 53 VCR MAIN MENU 16, 19, 46 Chapter 5 61 15708270 (VR661HF)(E) 08 Other 61 2/7/01, 4:56 PM Please do not send any products to the Indianapolis address listed in this manual or on the carton. This will only add delays in service for your product. Thomson multimedia Inc. 10330 North Meridian Street Indianapolis, IN 46290 2001 Thomson multimedia Inc. Trademark(s) Registered Marca(s) Registrada(s) Printed in Korea TOCOM 15708270 15708270 (VR661HF)(E) 08 Other 62 2/8/01, 10:21 AM
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2004-09-23 | 67.25 ~ 71.75 | HID - Part 15 TV Interface Device | Class II permissive change or modification of presently authorized equipment |
2 | 2004-06-09 | 67.25 ~ 71.25 | HID - Part 15 TV Interface Device | |
3 | 2002-12-24 | 67.25 ~ 71.75 | HID - Part 15 TV Interface Device | |
4 | 2001-12-26 | 67.25 ~ 71.75 | HID - Part 15 TV Interface Device | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 4 | Effective |
2004-09-23
|
||||
1 2 3 4 |
2004-06-09
|
|||||
1 2 3 4 |
2002-12-24
|
|||||
1 2 3 4 |
2001-12-26
|
|||||
1 2 3 4 | Applicant's complete, legal business name |
WINIADAEWOO Co., Ltd.
|
||||
1 2 3 4 | FCC Registration Number (FRN) |
0004371050
|
||||
1 2 3 4 | Physical Address |
509, Dunchon-daero, Jungwon-gu, Seongnam-si
|
||||
1 2 3 4 |
Gyeonggi-do, N/A 13217
|
|||||
1 2 3 4 |
South Korea
|
|||||
app s | TCB Information | |||||
1 2 3 4 | TCB Application Email Address |
M******@CCSEMC.COM
|
||||
1 2 3 4 |
m******@ccsemc.com
|
|||||
1 2 3 4 |
m******@ccsemc.com
|
|||||
1 2 3 4 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 2 3 4 | Grantee Code |
C5F
|
||||
1 2 3 4 | Equipment Product Code |
7NF0008
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 4 | Name |
Y******** C****
|
||||
1 2 3 4 | Title |
Assistant Section Manager
|
||||
1 2 3 4 | Telephone Number |
82-31********
|
||||
1 2 3 4 | Fax Number |
82-31********
|
||||
1 2 3 4 |
y******@winiadaewoo.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 4 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 3 4 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 4 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 4 | Equipment Class | HID - Part 15 TV Interface Device | ||||
1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Video Cassette Recorder | ||||
1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 4 | Modular Equipment Type | Does not apply | ||||
1 2 3 4 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
1 2 3 4 | Original Equipment | |||||
1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 2 3 4 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 4 | Grant Comments | Class II permissive change filing by adding three alternate tuners: SSTMI-US6(SAMSUNG), TMZH2-030A(Alps), and TADM-H201F(LG). | ||||
1 2 3 4 | Class II permissive change filing by adding Samsung/SSTMI-US5 tuner and Feelux, Kwang Sung / TSW-8R4N-(H) transformer. | |||||
1 2 3 4 | Add three alternate TV tuners in this Class II permissive change filing. | |||||
1 2 3 4 | Seven tuners are included in this filing. | |||||
1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 4 | Firm Name |
IST Co., Ltd
|
||||
1 2 3 4 | Name |
B****** B********
|
||||
1 2 3 4 | Telephone Number |
82-31********
|
||||
1 2 3 4 | Fax Number |
82-31********
|
||||
1 2 3 4 |
@******@.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B | 61.25 | 65.75 | |||||||||||||||||||||||||||||||||||||
1 | 2 | 15B | 67.25 | 71.75 | |||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15B | CE | 61.25 | 65.75 | ||||||||||||||||||||||||||||||||||||
2 | 2 | 15B | CE | 67.25 | 71.25 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15B | CE | 61.25 | 65.75 | ||||||||||||||||||||||||||||||||||||
3 | 2 | 15B | 67.25 | 71.75 | |||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15B | 61.25 | 65.75 | |||||||||||||||||||||||||||||||||||||
4 | 2 | 15B | 67.25 | 71.75 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC