|
app
s
|
Applicant Information
|
|
|
1 2 3 4 5 6 7
|
Effective |
2024-03-05
|
|
1 2 3 4 5 6 7
|
2024-02-01
|
|
1 2 3 4 5 6 7
|
Applicant's complete, legal business name |
Winmate Inc.
|
|
1 2 3 4 5 6 7
|
FCC Registration Number (FRN) |
0026153650
|
|
1 2 3 4 5 6 7
|
Physical Address |
9F, No.111-6, Shing-De Rd., San-Chung District
|
|
1 2 3 4 5 6 7
|
New Taipei City, N/A 241
|
|
1 2 3 4 5 6 7
|
New Taipei City, N/A
|
|
1 2 3 4 5 6 7
|
Taiwan
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4 5 6 7
|
TCB Application Email Address |
b******@phoenix-testlab.de
|
|
1 2 3 4 5 6 7
|
h******@acbcert.com
|
|
1 2 3 4 5 6 7
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
1 2 3 4 5 6 7
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4 5 6 7
|
Grantee Code |
PX9
|
|
1 2 3 4 5 6 7
|
Equipment Product Code |
AX210
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4 5 6 7
|
Name |
L******** L********
|
|
1 2 3 4 5 6 7
|
Title |
R&D Manager
|
|
1 2 3 4 5 6 7
|
Telephone Number |
886-2******** Extension:
|
|
1 2 3 4 5 6 7
|
Fax Number |
886-2********
|
|
1 2 3 4 5 6 7
|
E-mail |
l******@winmate.com.tw
|
|
|
app
s
|
Technical Contact
|
|
1 2 3 4 5 6 7
|
Firm Name |
DEKRA Testing and Certification Co., Ltd
|
|
1 2 3 4 5 6 7
|
Name |
K****** L****
|
|
1 2 3 4 5 6 7
|
Physical Address |
No.5-22, Ruishukeng, Linkou Dist.
|
|
1 2 3 4 5 6 7
|
New Taipei City
|
|
1 2 3 4 5 6 7
|
Taiwan
|
|
1 2 3 4 5 6 7
|
Telephone Number |
886-2********
|
|
1 2 3 4 5 6 7
|
E-mail |
k******@dekra.com
|
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 5 6 7 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 6 7 | No |
| 1 2 3 4 5 6 7 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 6 7 | No |
| 1 2 3 4 5 6 7 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 09/01/2024 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 5 6 7 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 5 6 7 | Equipment Class | DTS - Digital Transmission System |
| 1 2 3 4 5 6 7 | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 4 5 6 7 | JBP - Part 15 Class B Computing Device Peripheral |
| 1 2 3 4 5 6 7 | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 4 5 6 7 | 6XD - 15E 6 GHz Low Power Indoor Client |
| 1 2 3 4 5 6 7 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Intel Wi-Fi 6E AX210 Module with WIFI and Bluetooth |
| 1 2 3 4 5 6 7 | Intel Wi-Fi 6E AX210 Module |
| 1 2 3 4 5 6 7 | Intel WiFi 6E AX210 Module |
| 1 2 3 4 5 6 7 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 4 5 6 7 | Yes |
| 1 2 3 4 5 6 7 | Modular Equipment Type | Single Modular Approval |
| 1 2 3 4 5 6 7 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
| 1 2 3 4 5 6 7 | Change in Identification |
| 1 2 3 4 5 6 7 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 4 5 6 7 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 5 6 7 | Grant Comments | Power Output listed is conducted. Modular Approval. Power output has been
reduced at the upper bandedge channels as shown in filings under this FCC ID.
The antenna(s) used for this transmitter must not transmit simultaneously with
any other antenna or transmitter, except in accordance with FCC multi-
transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. This
module is approved in mobile/portable configurations. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be
used with this transmitter. Grantee must coordinate with OEM integrator to
determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published
KDB 616217 Supplement documentation. When all conditions of this filing
cannot be met installation of this device into specific final products may require
the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be
provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. Device is a client only device
containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band
operations as described in this filing. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they
choose to integrate into a host product. The highest reported Body and
Simultaneous SAR values are 0.59W/kg and 1.57W/kg respectively.
This module is approved in portable/mobile configurations with antenna
SkyCrossreference Antenna, Type PIFA at 13mm minimum test separation
distance.
SAR testing was performed to demonstrate RF compliance. <br>
<br>
Class II permissive change for additional chassis added, added one antenna
and unable WLAN 5G & WIFI 6E function by firmware.
SAR compliance for body-worn operating configurations is limited to the belt-
clips, holsters or similar accessories that have no metallic component in the
assembly and must provide at least 0 mm separation between the device and
the user's body. End-users must be informed of the body-worn operating
requirements for satisfying RF exposure compliance.
The highest reported SAR values for body-worn accessory use conditions are
0.86 W/kg, respectively. |
| 1 2 3 4 5 6 7 | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for
this transmitter must not transmit simultaneously with any other antenna or
transmitter, except in accordance with FCC multi-transmitter product procedures.
Grantee must provide installation and operating instructions for complying with
FCC multi-transmitter product procedures. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this
transmitter. End-users and installers must be provided with transmitter operating
conditions for satisfying RF exposure compliance. The highest reported Body and
Simultaneous SAR values are 0.02W/kg and 1.57W/kg respectively.
This module is approved in portable/mobile configurations with antenna
SkyCrossreference Antenna, Type PIFA at 13mm minimum test separation
distance.
SAR testing was performed to demonstrate RF compliance. <br>
<br>
Class II permissive change for additional chassis added, added one antenna and
unable WLAN 5G & WIFI 6E function by firmware.
SAR compliance for body-worn operating configurations is limited to the belt-clips,
holsters or similar accessories that have no metallic component in the assembly
and must provide at least 0 mm separation between the device and the user's
body. End-users must be informed of the body-worn operating requirements for
satisfying RF exposure compliance.
The highest reported SAR values for body-worn accessory use conditions are
<0.10 W/kg, respectively. |
| 1 2 3 4 5 6 7 | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.57W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 13mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
| 1 2 3 4 5 6 7 | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.57W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 13mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
| 1 2 3 4 5 6 7 | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and1.57W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCrossreference Antenna, Type PIFA at 13mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
| 1 2 3 4 5 6 7 | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.58 W/kg respectively.
This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 13mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| 1 2 3 4 5 6 7 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 5 6 7 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4 5 6 7
|
Firm Name |
Eurofins E&E Wireless Taiwan Co., Ltd.
|
|
1 2 3 4 5 6 7
|
Intel Corporation S.A.S.
|
|
1 2 3 4 5 6 7
|
Name |
F******** L******
|
|
1 2 3 4 5 6 7
|
N****** A****
|
|
1 2 3 4 5 6 7
|
Telephone Number |
+886-********
|
|
1 2 3 4 5 6 7
|
00334********
|
|
1 2 3 4 5 6 7
|
E-mail |
F******@eurofins.com
|
|
1 2 3 4 5 6 7
|
n******@intel.com
|
|