all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 4.25 MiB | March 18 2020 / March 25 2020 | |||
1 |
|
Internal Photos | Internal Photos | 4.39 MiB | March 18 2020 / March 25 2020 | |||
1 |
|
External Photos | External Photos | 1.21 MiB | March 18 2020 / March 25 2020 | |||
1 |
|
ID Label/Location Info | ID Label/Location Info | 171.77 KiB | March 18 2020 / March 25 2020 | |||
1 | Block Diagram | Block Diagram | March 18 2020 | confidential | ||||
1 |
|
Declaration of authorization | Cover Letter(s) | 13.44 KiB | March 18 2020 / March 25 2020 | |||
1 | Operational Description | Operational Description | March 18 2020 | confidential | ||||
1 |
|
Request for confidentiality | Cover Letter(s) | 29.36 KiB | March 18 2020 / March 25 2020 | |||
1 | Schematics | Schematics | March 18 2020 | confidential | ||||
1 |
|
Test Report | Test Report | 1.23 MiB | March 18 2020 / March 25 2020 | |||
1 |
|
Test Setup Photos | Test Setup Photos | 483.15 KiB | March 18 2020 / March 25 2020 |
1 | Users Manual | Users Manual | 4.25 MiB | March 18 2020 / March 25 2020 |
M116P/ PT x86 Rugged Tablet Intel Pentium N4200, 1.1GHz (turbo to 2.5GHz) Windows 10 IoT Enterprise User Guide Version 1.0 Document Part No. 91521110105G Please read these instructions carefully before using this product, and save this manual for future use. 1 11.6" Rugged Tablet M116P/ PT Series User Guide Contents CONTENTS CHAPTER 1: READ ME FIRST 1.1 ADVISORY CONVENTIONS 1.2 SAFETY INFORMATION 1.3 HANDLING AND MAINTENANCE 1.4 DECLARATION OF CONFORMITY (DOC) CHAPTER 2: GETTING STARTED 2.1 INTRODUCTION 2.2 UNPACKING 2.3 DESCRIPTION OF PARTS 2.4 INDICATORS 2.5 HOTKEY FOR SPECIFIC FUNCTIONS 2.6 FIRST-TIME OPERATION 2.6.1 Installing a Micro SD Card 2.6.2 Installing Battery 2.6.3 Charging Your Tablet 2.6.4 Using LAN Port (RJ45) 2.6.5 Starting the Tablet CHAPTER 3: SETTING UP WINDOWS FOR THE FIRST TIME 3.1 INTRODUCTION 3.2 SETTING UP WINDOWS 10 IOT ENTERPRISE CHAPTER 4: OPERATING THE DEVICE 4.1 HOTTAB INTRODUCTION 4.2 SHORTCUTS 4.3 USINGCAMERA 4.4 BUILT-IN DEVICES ON/OFF 4.4.1 Using the Wireless LAN (Wi-Fi) 4.4.2 Using the GPS 4.4.3 Turn on/off the GPS External Antenna 4.4.4 Using the Bluetooth 4.4.5 Turning On/Off LED Indicators 4.4.6 Using the Barcode Reader 4.4.7 Using the HF RFID Reader 4.4.8 Turn on/off the Light Sensor 4.4.9 Changing Touchscreen Modes 4.4.10 Using the Expansion Module 4.4.11 UHF RFID Reader Module CHAPTER 5: FREQUENTLY USED SETTINGS 5.1 SCREEN RESOLUTION SCALING AND SETTING 5.1.1 Changing Display Scaling (Recommended) 5.1.2 Changing Screen Resolution 5.2 REPLACING BATTERY 5.3 USING RECOVERY WIZARD TO RESTORE COMPUTER 5.4 DOCKING CONNECTOR PIN DEFINITION 5.5 COM PORT DEFINITION 5.6 GIGALAN PORT DEFINITION 5.7 PAIRING WITH A WIRELESS BLUETOOTH BARCODE SCANNER 5.7.1 Setup Computer for Bluetooth Pairing 5.7.2 Set up the Barcode Scanner for Bluetooth Pairing 5.7.3 Perform Bluetooth Pairing CHAPTER 6: TROUBLESHOOTING 6.1 BASIC TROUBLESHOOTING 1 3 3 4 6 7 8 8 9 10 12 12 12 16 19 16 16 19 20 21 22 44 44 46 47 49 49 50 51 56 56 13 13 14 15 15 22 22 23 23 24 24 31 35 36 37 38 44 45 51 54 54 APPENDIX APPENDIX A: PRODUCT SPECIFICATIONS Contents 2 58 58 3 11.6" Rugged Tablet M116P/ PT Series User Guide Chapter 1: Read Me First 1.1 Advisory Conventions Four types of advisories are used throughout the user manual to provide helpful information or to alert you to the potential for hardware damage or personal injury. These are Notes, Important, Cautions, and Warnings. The following is an example of each type of advisory. Note:
A note is used to emphasize helpful information Important:
An important note indicates information that is important for you to know. Caution A Caution alert indicates potential damage to hardware and explains how to avoid the potential problem. AttentionUnealertedattentionindique un dommage possible lquipement et explique comment viter le problmepotentiel. Warning!An Electrical Shock Warning indicates the potential harm from electrical hazards and how to avoid the potential problem. Avertissement!Un Avertissement de Choc lectriqueindique le potentiel de chocssur des emplacements lectriques et comment vitercesproblmes. 1.2 Safety Information Chapter 1: Read Me First 4 Do Not Expose the Battery Pack to Excessive Heat, or Extreme Heat (Near Fire, in Direct Sunlight for example)Generation of heat, ignition or rupture may result
[FR] Ne pas exposer le bloc-pile une Chaleur Excessive, ou une Chaleur Extrme (Prs d'un feu, sous la lumire du soleil par exemple)Une production de chaleur, l'amorage ou la rupture peuvent tre occasionns Do Not Use the Battery Pack With Any Other Products. The battery pack is rechargeable and is only designed for this specific product. If it is used with a product other than the specified product, electrolyte leakage, generation of heat, ignition or rupture may result.
[FR] Ne pas utiliser avec un autre produit La batterie est rechargeable et a t conue pour un produit spcifique. Si elle est utilise sur un produit diffrent de celui pour lequel elle a t conue, des pertes dlectrolytes et une production de chaleur sont possibles, elle risque galement de prendre feu ou de casser. Do Not Use This Product With Battery Other Than the One Specified.
[FR] Ne pas utiliser ce produit avec une batterie autre que celle spcifie Discontinue using device immediately if you notice the battery is swelling, or looks puffy or misshapen. Do not attempt to charge or use the device. Do not handle a damaged or leaking battery. Do not let leaking battery fluid come into contact with your eyes, skin or clothing.
[FR] Si vous remarquez une pile gonfle, largie ou anormale, cesser lutilisation de lappareil immdiatement. Nessayez pas de recharger lappareil ou de lutiliser. Ne pas manipuler une pile qui fuit ou qui est endommage. Ne laissez pas de liquide qui fuit entrer en contact avec vos yeux, votre peau ou vos vtements. Precaution on Battery Pack Prcaution avec le bloc-pile Do Not Disassemble, Modify, or Insert Sharp Objects Into the Battery Pack. Electrolyte leakage, generation of heat, ignition or rupture may result.
[FR] Ne pas dmonter, modifier, ou insrer des objets pointus l'intrieur du bloc-pile. Une fuite d'lectrolyte, la gnration de chaleur, l'amorage ou la rupture peuvent tre occasionns. Do Not Short the Positive (+) and Negative (-) Terminals of the Battery. Generation of heat, ignition or rupture may result. When carrying or storing the device, do not place the battery pack together with articles that may contact electricity.
[FR] Ne pas court-circuiter les bornes Positive
(+) et Ngative (-) de la pile, la gnration de chaleur, l'amorage ou la rupture peuvent tre occasionns. Lors du transport et du rangement de l'appareil, ne pas placer le bloc-pile en mme temps que des articles pouvant crer un contact lectrique. Do Not Apply Shocks to the Battery by Dropping It or Applying Strong Pressure to It. Electrolyte leakage, generation of heat, ignition or rupture of battery may occurs.
[FR] Ne pas faire subir de choc la pile en la laissant tomber ou en appliquant une forte pression dessus. Une fuite d'lectrolyte, la gnration de chaleur, l'amorage ou la rupture peuvent tre occasionns. Do Not Charge the Battery Other Than Methods Those Specified In This Manual. If the battery is not charged using one of the specified methods, electrolyte leakage, generation of heat, ignition or rupture may result.
[FR] Ne pas charger la pile par d'autres mthodes que celles spcifies dans ce manuel. Si la pile n'est pas charge en utilisant l'une des mthodes spcifies, une fuite d'lectrolyte, la gnration de chaleur, l'amorage ou la rupture peuvent tre occasionns. When the Battery Pack Has Deteriorated, Replace It with a New Battery. Continued use of a damaged battery pack may result in heat generation, ignition or battery rupture.
[FR] Lorsque la pile est dtriore, la remplacer par une nouvelle pile. L'utilisation continue d'une pile endommage peut occasionner une gnration de chaleur, l'amorage ou la rupture de la pile. 5 11.6" Rugged Tablet M116P/ PT Series User Guide General Product Safety Scurit gnrale des produits Do not block any ventilation openings. Do not place the product against a wall or in an enclosed space as doing so might impede the flow of cooling air.
[FR] Ne pas bloquer les ouvertures de ventilation. Ne pas placer le produit contre un mur ou dans un espace clos de faon entraver la circulation de l'air de refroidissement. Do not place the product near any heat sources such as radiators, warm air intakes, stoves or other heat-generating devices
(including amplifiers or other heat producing equipment).
[FR] Ne pas placer le produit prs d'une source de chaleur comme des radiateurs, les arrives d'air chaud, poles ou autres produits gnrant de la chaleur (y compris les amplificateurs ou autre quipement produisant de la chaleur.) Protect the power cord from being crushed or pinched, particularly in the area of the plugs, any receptacles used, and the point of exit from the apparatus. Do not break off the ground pin of the power cord.
[FR] Empcher le cordon d'alimentation d'tre cras ou pinc, en particulier dans les zones de prises, des containers utiliss, et du point de sortie de l'appareil. Ne pas casser la broche de terre du cordon d'alimentation. Do not disregard the safety that a polarized or grounded connection can provide. A polarized connection consists of two plugs, one of which is larger than the other. A grounded connection has two blades and a third one that is grounded. If the main plug provided cannot be inserted intoyour outlet, consult an electrician to replace your obsolete outlet.
[FR] Ne pas ignorer la scurit qu'une prise polarise ou une prise de terre peut prvoir. Une prise polarise se compose de deux fiches, dont l'une est plus large que l'autre. Une prise de terre possde deux lames et une troisime qui est la terre. Si la fiche principale fournie ne peut tre insre dans votre prise, consultez un lectricien pour remplacer votre prise obsolte. Use only accessories specified by the manufacturer.
[FR] Utiliser uniquement les accessoires spcifis par le fabricant. This product should not be used near water such as bathtubs, sinks, swimming pools, wet basement, etc.
[FR] Ce produit ne dois pas tre utilis prs de l'eau comme les baignoires, les viers, les piscines, les sous-sols humides, etc. Use only with its transport carriage, stand, tripod, console or table specified by the manufacturer or sold with the product. When using a carriage, move the carriage assembly with the product carefully to avoid damage from falling over.
[FR] Utiliser uniquement avec son chariot de transport, support, trpied, console ou table spcifis par le fabricant ou vendu avec le produit. Lors de l'utilisation d'un charriot, dplacez l'ensemble chariot avec le produit avec soin pour viter tout dommage de chute. Unplug this apparatus during lightning storms or when it is not being used for long periods.
[FR] Dbrancher cet appareil durant les orages ou lorsqu'il n'est pas utilis pendant de longues priodes. Refer all servicing to qualified service personnel. A technical intervention is required when the apparatus has been damaged in any way, for example if the power cord or plug is damaged, liquid has been spilled or objects have fallen inside the unit, if the product has been exposed to rain or moisture, if it does not operate normally or if it has been dropped.
[FR] Confier toute rparation du personnel qualifi. Une intervention technique est ncessaire lorsque l'appareil a t endommag de quelque faon, par exemple si le cordon d'alimentation ou la fiche est endommag, du liquide a t renvers ou des objets sont tombs l'intrieur de l'unit, si le produit a t expos la pluie ou l'humidit, s'il ne fonctionne pas normalement ou s'il a t jet. General Guideline Directive gnrale It is recommended to reboot the device when some functions are defect or inactive. If it still can't solve the problems please contact your dealer or agent. Il est recommand de redmarrer l'appareil lorsque certaines fonctions sont dfectueuses ou inactives. Si le problme persiste, veuillez contacter votre revendeur ou votre agent. 1.3 Handling and Maintenance General Guideline Guide Gnral Keep the product at least 13 cm (5 inches)away from electrical appliances that can generate a strong magnetic field such as TV, refrigerator, motor, or a large audio speaker.
[FR] Garder le produit au moins 13 cm (5 pouces) de distance des appareils lectriques qui peuvent gnrer un fort champ magntique comme une tlvision, un rfrigrateur, un moteur, ou un important haut-parleur. Do not place heavy objects on top of the tablet computer as this may damage the display.
[FR] Ne pas placer d'objets lourds sur le dessus de l'ordinateur tablette cela peut endommager l'cran. The screen surface can be easily scratched. Use with care. Do not use paper towels to clean the display but use the includedcleaning cloth. Avoidtouchingit with a pen or pencil.
[FR] La surface de l'cran peut tre facilement raye. Utiliser avec prcaution. Ne pas utiliser de serviette en papier pour nettoyer l'cran mais utiliser le chiffon de nettoyage inclus. viter de toucher avec un stylo ou un crayon. To maximize the life of the backlight in the display, allow backlight to automatically turn off as a result of power management. Avoid using a screen saver or other software that preventsthe power management from working.
[FR] Pour maximiser la dure de vie du rtroclairage de l'cran, autoriser le rtroclairage rsultant de la gestion de l'alimentation. viter d'utiliser un conomiseur d'cran ou un autre logiciel empchant la gestion de l'alimentation de fonctionner. Cleaning Guideline Guide de nettoyage Use a soft cloth moistened with water or a non-
alkaline detergent to wipe the exterior of the product.
[FR] Utiliser un chiffon doux humidifi avec de leau ou un dtergeant non alcalin pour essuyer l'extrieur du produit. Chapter 1: Read Me First 6 Gently wipe the display with a soft, lint-free cloth. Do not use alcohol or detergent on the product.
[FR] Essuyer dlicatement l'cran avec un chiffon doux non pelucheux. Ne pas utiliser d'alcool ou un dtergent sur le produit. Touchscreen Guideline Guide de l'cran tactile Use your finger or the stylus on the display. Using sharp or metallic object may cause scratches and damage the display, thereby causing errors.
[FR]Utiliser votre doigt ou le stylet sur l'cran. L'utilisation d'un objet pointu ou mtallique peut provoquer des rayures. Use a soft cloth to remove dirt on the display. The touchscreen surface has a special protective coating that prevents dirt from sticking to it. Not using a soft cloth may cause damage to the special protective coating on the touchscreen surface. To clean off hard to remove dirt, blow some steam on the particular area and gently wipe away using a soft cloth.
[FR]Utiliser un chiffon doux pour enlever la poussire sur l'cran. La surface de l'cran tactile a un revtement protecteur spcial empchant la salet de se coller lui. Ne pas utiliser un chiffon doux peut endommager le revtement spcial sur la surface de l'cran tactile. Pour nettoyer les salets plus difficiles enlever, souffler de la bue sur la zone particulire et essuyer doucement avec un chiffon doux. Do not use excessive force on the display. Avoid placing objects on top of the display as this may cause the glass to break.
[FR]Ne pas utiliser une force excessive sur l'cran. viter de placer des objets au dessus de lcran cela pourrait provoquer une cassure du verre. When there is a noticeable discrepancy in the operation of the touchscreen function (your touch does not correlate to the proper location on the screen), recalibrate the touchscreen display.
[FR]Lorsqu'il y a un cart sensible dans le fonctionnement de l'cran tactile (votre contact ne correspond pas la bonne position sur l'cran), recalibrer l'cran tactile. 7 11.6" Rugged Tablet M116P/ PT Series User Guide 1.4 Declaration of Conformity (DoC) FCC Statement This device complies with part 15 FCC rules. Operation is subject to the following two conditions:
This device may not cause harmful interference. This device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a class "B" digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at him own expense. CE Notice (European Union) Electromagnetic Compatibility Directive (2014/30/EU) EN55024: 2010/ A1: 2015 o o o o o o o IEC61000-4-2: 2009 IEC61000-4-3: 2006+A1: 2007+A2: 2010 IEC61000-4-4: 2012 IEC61000-4-5: 2014 IEC61000-4-6: 2014 IEC61000-4-8: 2010 IEC61000-4-11: 2004 EN55032: 2015/AC:2016 EN61000-3-2:2014 EN61000-3-3:2013 Low Voltage Directive (2014/35/EU) EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013 This equipment is in conformity with the requirement of the following EU legislations and harmonized standards. Product also complies with the Council directions. Chapter 2: Getting Started Chapter 2: Getting Started 8 This chapter tells you step by step how to get the Tablet Computer up and running. 2.1 Introduction Congratulations on purchasing Winmate 11.6-inch x86 Rugged Tablet M116P/ PT Series. The M116 platform is a next-generation Windows rugged tablet series designed to boost efficiency in a mobile, versatile form factor. The large 11.6-inch sunlight readable full HD display allows for a premium viewing experience no matter where work takes place. The M116P/ PT Series allows for efficient performance with Intel Pentium processing with all day use with a hot-swappable battery design. Multiple wireless connectivity options and data capture modules allows users to complete their tasks reliably; from warehouses, to vehicle mounted, to field service external use. All these tools suited for productivity encased in an IP65 water and dust proof rugged housing with MIL-STD 810G specs ensures that the M116P/ PT Series Rugged Tablet is the ultimate rugged tablet designed with mobile productivity in mind. Highlights Intel Pentium N4200 processor 11.6 1920 x 1080 LED panel with direct optical bonding IP65 water and dust proof with MIL-STD-810G rugged housing Optional Integrated 1D/2D Barcode Reader and HF RFID for data collection Removable battery with hot-swap function for all day productivity 802.11ac WiFi, BT 5.0, GPS Wireless Connectivity Optional GigaLAN Port 9 11.6" Rugged Tablet M116P/ PT Series User Guide 2.2Unpacking Check and identify the supplied accessories:
Tablet Computer Standard Battery BM101 Part No.98K000A000D6 Power Adapter Part No.922D065W19V1 Power Cord and Plugs t Capacitive Stylus DS-M101 Part No.9B0000000415 Quick Start Guide & Driver CD Your package may include other optional accessories based on your order:
High Capacity Battery BL101 Gigabit Ethernet Adapter Vehicle Dock DD-M116 (w/o VGA output) Desk Dock Part No.98DT00A0001G Part No.98DT00A0001H Vehicle Charger Part No.9226065W19V0 Part No.98K000A0003S Hand StrapHS-M116 Part No.98K000A000DC Battery Charger BC-M101-2N Part No.98K000A000DK VESA Mount KitVS-M116 Part No.98K000A000DB Shoulder StrapSS-M116 Part No.98K000A000DD Carry BagCB-M116 Part No.98K000A000DJ Micro HDMI Cable Part No.9491191190K7 Part No.9AN00000000I RS232 Cable Part No.9AN00000000L USB Hub Adapter Part No.9AN00000000J Vehicle Cradle VC-M116 (Charging only) Part No.98DT00A0001I 2.3Description of Parts Chapter 2: Getting Started 10 Dimensions: 300.67 x 201.97 x 22.5 mm Front:
Left:
Right:
No Item 11.6 PCAP Touchscreen Front Camera Light Sensor LED Indicators Digital Mic with Noise Cancellation Speakers All-Around Rubber Description 11.6-inch display with LED backlight, acts as one of the inputs for the Tablet Computer. 2MP front camera. Indicates the environment brightness. Show the current status of the Tablet Computer:
Power, Battery, HDD, RF Use during video recordings and communications. Emit sounds. Protects the Tablet Computer from drops. 1 2 3 4 5 6 7 Front LED Indicator Details:
No Item 8 9 10 String Hole Micro HDMI Micro SDXC slot 11 USB 3.0 Type-C 12 USB 3.0 Type-A 13 Mic In/Line Out 14 Power Jack Description Use to attach a wrist strap or other accessories. HDMI output to external display. Memory card reader port for Micro SDXC card. High speed USB port connects to USB devices, such as USB flash drive, mouse, keyboard, printer, etc. Note:The USB Type-C connector follows USB 3.0 standard, which does not support Alternate Mode (ALT) or USB Power Delivery (USB-
PD). USB 3.0 port connects to USB devices, such as USB flash drive, mouse, keyboard, printer, etc. Headset or headphone can be connected (Mic is only supported with 3.5mm 4-pin headset). DC power input jack that accepts 19V DC power input. 11 11.6" Rugged Tablet M116P/ PT Series User Guide Rear:
Top:
Bottom:
No Item Smart Card Reader(Option al) Expansion Slot
(Optional) 17 Rear Camera BatteryReleas e Touch Pen Slot Battery Lock Latch 15 16 18 19 20 21 Battery*
22 23 Service Window Waterproof I/O Cover Description Smart Card Reader, complies with IS07816-1.2.3T=1 and T= protocol For optional add-on UHF RFID Reader or Smart Card Reader. 8MP rear camera with autofocus. Captures photos and videos. SliderSpring-loaded slider that latches the battery in. Pen holder slot to store touch pen. Latch to lock the battery in place once battery is inserted. Not spring-
loaded. Standard: Hot-
swappable 7.7V typ. 5900 mAh Li-Polymer Battery (2S1P), Optional: 7.4V typ. 10280 mAh Li-Polymer Battery (2S2P) Provide access to Service Window Protects I/O ports from water and dust. No Item 24 Optional Barcode 25 PhysicalButtons
: Power, F1, F2, F3 26 Kensington Lock 27 28 Docking Connector GigaLAN Port
(Optional) Top Buttons Details:
Description Barcode Scanner for reading of 1D/2D barcode. Press power button to turn on the tablet.Long press power button to hard turn off the tablet. Programmable function key can be configured by Hottab Utility. Use to attach tablet computer around a table leg or another secure location. Port to docking solutions such as vehicle docking to provide power and external antenna. GigaLAN RJ45 connector.
*Note:Micro SIM card slot is located in the battery compartment. Please remove the battery first to access the Micro SIM card slot. Chapter 2: Getting Started 12 2.4Indicators Icon Indicator Power Indicator Battery Status Disk Activity Indicator RF Communication Description Blue Tablet is ON No light Tablet is OFF OrangeAC adapter is plugged in and charging GreenAC adapter is plugged in and battery is full charged Solid Red - Low battery (<10%) Blinking Red Battery is being hot swapped. No light Battery is in use and more than 10%
Green - Disk Activity No light - Disk Idling Green - One of Wi-Fi/BT/GPS is ON No light - Wi-Fi/BT/GPS are all OFF 2.5Hotkeyfor Specific Functions Physical buttons in addition to its dedicated functions can also be used to emulate commonly used keyboard key strokes. Under different scenario, a single physical button or acombination of physical buttons provide different keyboard key strokes, which are specified below:
In POST (before Windows boots up):
Buttons Keystroke In Windows:
Buttons F6 to enter Recovery Menu Escto enter BIOS setup screen Menu F1 F2 Power F1+F3 F3 Keystroke Hottab Quick Access Default: Web Browser Default: Camera Power ON/ OFF Ctrl+Alt+Del Default:Calculator F1 F2 2.6First-Time Operation To get started:
1. Install storage card. 2. Install the battery. 3. Charge your tablet. 4. Start the tablet. 13 11.6" Rugged Tablet M116P/ PT Series User Guide 2.6.1 Installing a Micro SD Card Your tablet supports additional storage with an optional micro SDXC card. To install Micro SDXC Card:
1. Open I/O protective cover by pulling out the latch. 2. Insert micro SDXC card into slot with contacts facing down. 3. Press the card in to ensure that it is seated properly. 4. Close I/O protective cover. To remove Micro SD Card:
1. Open I/O protective cover by pulling out the latch. 2. Push and release the micro SD card tounlock it. 3. Pull out the micro SD card. 2.6.2 Installing Battery Caution Disconnect any cords connected to the tablet computer before installation or removing battery procedure. AttentionDbranchez tous les cordons connects la tablette avant l'installation ou la procdure de retrait de la batterie. To install the standard battery pack:
1. Turn the tablet over, back facing up. 2. Insert the battery with the connector-pins side first, and then lower the battery into the battery compartment.Make sure the battery is completely lowered into the compartment. Once fully inserted, the Battery Release Slider automatically locks. Battery will be flat against the housing once fully inserted. 3. Push the Battery Lock to the Locked position. To remove the battery pack:
1. Shut down the tablet (or put into sleep mode). Turn the tablet computer over, back facing up. 2. Pushthe Battery Lock Latch it to the Unlocked position. 3. Pull up and holdthe Battery Release Slider that is spring-loaded. 4. Lift the battery out using the opening on the side of battery compartment. Chapter 2: Getting Started 14 2.6.3 Charging Your Tablet The Tablet operates either on external AC power or internal battery power. It is recommended to use AC power when you start up the Tablet for the first time. CautionUse only the AC adapter included with your Tablet Computer. Using other AC adapters may damage the Tablet Computer and the Battery. AttentionUtilisez uniquement l'adaptateur secteur fourni avec votre ordinatrice tablette. L'utilisation d'autres adaptateurs secteur peut endommager la tablette tactile et la batterie. To connect a tablet to AC power:
1. Open I/O protective cover by pulling out the latch. 2. Plug the DC cord of the AC adapter into the power jack of the tablet computer. 3. Plug the AC power cord into the AC adapter. 4. Plug the AC power cord into the electrical outlet. The battery LED indicator shows different battery states:
Orange- AC adapter is plugged in and battery is charging. Green- AC adapter is plugged in and battery is fully charged. Solid Red- Low battery level (<10%). Blinking Red Battery is being hot swapped. No light Battery is in use and charged (>10%). 15 11.6" Rugged Tablet M116P/ PT Series User Guide 2.6.4Using LAN Port (RJ45) Notice that the LAN Port (RJ45) is optional and may not be supported by your device. Check your order specifications for more details. 1. Connect the tablet PCto external devices using LAN cable. 2.6.5Starting the Tablet Important: When powering on the device for the first time, please make sure theres no interruption during the Windows setting up process, for example, accidentally powering off. If it happened, please access the recovery menu by pressingFn1 button on the front bezel to initiate recovery process. Press and hold the power button for 3 seconds until the blue LED power indicator light up. Note:Do not press the power button repeatedly. Do not perform the following operations until the Disk Activity Indicator off Connecting or disconnecting the AC adapter Pressing the power button Touching the tablet buttons, screen, or external keyboard/mouse To power off the Tablet Computer:
1. Make sure you have closed any programs that are open on the Desktop. Start Screen apps dont need to be closed. 2. Tap on the Settings charm. 3. Tap on Power. 4. Tap on Shut Down. 5. Wait for Tablet Computer to power off. Note: The computer will forcibly be powered off if the power button is pressed and held for 6 seconds or longer. Chapter 3: Setting Up Windows for the First Time Chapter 3: Setting Up Windows for the First Time 16 This chapter details how to setup the Windows that may be installed on the tablet for the first time. 3.1 Introduction The M116P/ PT Series Rugged Tablet operate on Windows 10 IoT Enterprise operating system. CautionMake sure the battery is full charged before starting the Tablet Computer for the first time with internal battery power. Attention Assurez-vous que la batterie est compltement charge avant de dmarrer la tablette tactile pour la premire fois avec la batterie interne. Public network: Select this location if you do not recognize all the computers on the network (For example, you are in a coffee shop or airport, or you have mobile broadband.) This is a public network and is nottrusted.Select the location where you will most often use the computer. 3.2 Setting up Windows 10 IoT Enterprise Follow the steps below to complete the Windows 10 IoT Enterprise setup process. 1. Press the power button to turn on the computer. 2. First, select your country/region, your preferred app language, your preferred keyboard layout, and your time zone, then tapNext. 17 11.6" Rugged Tablet M116P/ PT Series User Guide 3. On the Here's the legal stuff screen, read through the disclosures, then tapAccept. 4. Windows will then try to connect to network.TapSkip this step to continue without a wireless connection as you can then set up the network later. 5. On the Get going fast screen, click Use Express settingsfor the fastest setup. If you would like more information, tapLearn more, or if you would like to select your own options, click Customize settings. 6. To create a local account, type your User name, password, and Password hint in the fields provided, and thentapNext. Chapter 3: Setting Up Windows for the First Time 18 7. The initial setup screens are complete, and the desktop is displayed. 8. Read any introductory screens describing features of your computer, and tapNext upon completing each. You are now done with the initial setup process. 19 11.6" Rugged Tablet M116P/ PT Series User Guide Chapter 4: Operating the Device This chapter describes how to operate the M116P/ PT Series Rugged Tablet, including camera, Hottab, barcode, RFID, WLAN, GPS features. Note:Please download the SDK from Winmate Download Center.
>>M116P>>Development Kit or check the Driver CD which is shipped with the tablet. Please notice that HF RFID reader, Barcode reader are optional module, please make sure user have ordered the module before using the SDK. 4.1 Hottab Introduction Hottab provides quick access to the tablets functions and features, such as setting up shortcuts, using camera, powering on/off built-in devices, programming function key, and changing power management. As Windows starts up, Hottab starts and runs in the background. To open the Hottab control utility launch the Hottab Utility
. The main user interface is located on the right side of the screen. There are 4 main menu options:
Shortcuts, Camera, Device ON/OFF, and Settings. Operations and functions on each menu options is explained in detail in the coming section. Chapter 4: Operating the Device 20 Icon Description Shortcuts Camera Device ON/OFF Settings Allows users to configure short cut to quickly access programs with a few tabs. Allows users take a picture or record a video. User can also adjust setting related to camera in this menu option. Enables/disables tablet computers hardware functions. The configurable functions are Wi-Fi, GPS, Bluetooth, Camera, LED indicators, Barcode Reader, RFID Reader, and GPS Antenna routing options. Provides users information such as PC Information, Battery status, and also device settings such as power management setting, and function key mappings. 4.2 Shortcuts Hottab Shortcuts Menu provides an user-friendly interface to configure on-screensoftware short cuts and allow users to quickly access programs with a few tabs. The Shortcuts menu offers 8 empty slots to store users desired quick access. Shortcuts can be mapped to any of the executable files (.exe) installed on the tablet. Short Cut Menu:
To store a new shortcut:
1. Launch the Hottab 2. Tap on the Shortcuts button. 3. Tap on button of any empty slot. 4. An on screen file browser will appear. 5. Browse to find the desired application to have shortcut. 6. Click Open to save the shortcut. To remove an saved shortcut:
1. Launch the Hottab 2. Tap on the Shortcuts button. 3. Tap on the 4. Shortcut will be removed, and once again show Empty to indicate button of any saved slot to remove slot is empty. Tap on the button will hide the Hottab Utility Menu. Using the Hottab shortcuts:
1. Launch the Hottab 2. Tap on the Shortcuts button. 3. Tap on the saved shortcut items to access saved programs. 21 11.6" Rugged Tablet M116P/ PT Series User Guide 4.3 UsingCamera This Hottab menu option allows users take a picture or record a video. Before use, make sure the camera is powered on under Devices ON/OFF menu with the following scenarios. To open camera interface:
1. Launch the HottabUtility 2. Tap on "Device ON/OFF" button to check the built-in devices status. 3. Check the status color of the Camera icon:
. Item Status Color Description Orange White Camera Camera is enabled. Camera is disabled. 4. If the Camera is disabled (white), tap on the Camera icon to enable it (orange). 5. Click on the back arrow on top to go back to Hottab main menu. 6. Tap on the Cameraicon to open Camera menu. No 1 Item Review Settings Description Review Opens Camera settings page. Available Settings:
2 3 4 5 6 7 Camera Switch Flash Control Video Record Shutter Camera Exit Picture Save: modify/inspect saved location for pictures. Video Save Folder: modify/inspect saved location for video recordings. Picture Quality: Picture compression quality. Switch between front camera or rear camera. Enables/ Disables LED Flash when taking picture. Tap to Start, and press again to stop recording. Camera Shutter Button. Tap to take picture. Exits the Camera and hide Hottab Utility. 4.4 Built-in Devices On/Off This section describes how to get a quick access to set-up built-in devices, including turning on/off RF modules, setting up barcode reader, and RFID reader. Chapter 4: Operating the Device 22 HottabUtility
. 4.4.1 Using theWireless LAN (Wi-Fi) To use the wireless LAN(Wi-Fi) feature to connect to the network, perform the following procedure:
1. Launch the HottabUtility 2. Tap on the Device ON/OFF button. 3. Check the status color of the Wi-Fi icon:
. Item Status Color Description Orange Wi-Fi is enabled. Wi-Fi White Wi-Fi is disabled. 4. If the Wi-Fi feature is disabled (white), tap on the Wi-Fi icon to enable it (orange). 5. Click the wireless network connection status icon in the Windows notification area. A list of available wireless networks is displayed. 6. Double-click a network to connect to it. Provide required authentication information if needed. 7. To check the connection status, observe wireless network connection status icon in the Windows notification area. The more bars the icon shows, the better the wireless LAN connection strength is. 8. Now wireless LAN connection is setup, try connection to the network with a internet browser such as Internet Explorer. 4.4.2 Using the GPS To enable the GPS:
1. Launch the HottabUtility 2. Tap on the Device ON/OFF button. 3. Check the status color of the GPS icon:
. 23 11.6" Rugged Tablet M116P/ PT Series User Guide Item Status Color Description Orange White GPS is enabled. GPS is disabled. GPS 4. If the GPS feature is disabled (white), tap on the GPS icon to enable it (orange). 5. Now the GPS feature is ready to be used with an application utilizing the GPS. 4.4.3 Turn on/off the GPS External Antenna The vehicle dock of M116P/ PT Series Rugged Tablet supports external GPS antenna through standard SMA connector. To work with external GPS antenna, please make sure the tablet PC is well installed to vehicle dock, and the vehicle dock has connected with external GPS antenna. When working with vehicle dock connecting to external antenna, user can switch GPS antenna from the internal one to the external one from Hottab menu. To enable/disable the GPS Ext. Antenna:
1. Launch the HottabUtility 2. Tap on the Device ON/OFF button. 3. Check the status color of the GPS Ext. Antenna icon:
. Item Status Color Description Orange White GPS Ext. Antenna is enabled, and using external antenna if available GPS Ext. Antenna is disabled, and using built-in antenna 4. If the GPS Ext. Antenna is disabled (white), tap on the GPS Ext. Antenna icon to enable it GPS Ext. Antenna
(orange). 4.4.4Using the Bluetooth To enable the Bluetooth:
1. Launch the HottabUtility 2. Tap on the Device ON/OFF button. 3. Check the status color of the Bluetooth icon:
. Item Status Color Description Orange White Bluetooth is enabled. Bluetooth is disabled. BT displayed. automatically 4. If the Bluetooth feature is disabled (white), tap on the Bluetooth icon to enable it (orange). 5. Click the Bluetooth icon in the Windows notification area. A contextual menu for Bluetooth is 6. To add a device, tap on Add a Bluetooth Device. Windows will search any Bluetooth device 7. Choose the Bluetooth device to connect and follow onscreen prompt to continue the pair procedure and use the Bluetooth device. 4.4.5TurningOn/OffLED Indicators The LED Indicators for Power Status, Battery Status, and RF Communication can be turned on/off from Hottab menu. Chapter 4: Operating the Device 24 To enable/disable the LED indicators:
1. Launch the HottabUtility 2. Tap on the Device ON/OFF button. 3. Check the status color of the Indicator icon:
. Item Status Color Description Orange White LED indicator is enabled. LED indicator is disabled. Indicator 4. If the indicator is disabled (white), tap on the Indicator icon to enable it (orange). 4.4.6 Using the Barcode Reader The 2D/1D Barcode Reader is optional for M116P/ PT Series Rugged Tablet and is not re-workable by the end user. To use this feature, please make sure the tablet PC is built-in barcode reader before use, or contact our sales contact window for more details. Note:
Download the SDK from Winmate Download center here.
>>M116P>>Development Kit or check the Driver CD which is shipped with the tablet. To enable the Barcode Reader:
1. Launch the HottabUtility 2. Tap on theDevice ON/OFFbutton. 3. Check the status color of the Barcode icon. Item Status Color Description Orange Barcode Reader is enabled. Reading will need to be triggered manually thru function button. Barcode White Barcode Reader is disabled. 4. Open the application where barcode reader will be displaying the scanned barcode. 5. Trigger the barcode reader by pressingF2 function key (function key is programmable and can vary based on your settings). Tap Disconnect button to stop the connection with Barcode Reader.
*To recover the connection, please tap on the button again to re-connect with Barcode Reader. 25 11.6" Rugged Tablet M116P/ PT Series User Guide 4.4.6.1 Device Configuring and Setting 1.Click on Windows and search for EZConfig-Scanning from the Start menu. 2.Click on EZConfig-Scanning v4_IE and allow the blocked content if browser is blocking the content. 3.Click on Connected Device icon and wait for system to discover the device(Honeywell N660X). 4.Once Honeywell N660X is discovered please click Configure Device button as shown. Chapter 4: Operating the Device 26 4.4.6.2 Scanning Mode Settings 1. Click Device Settings under the Input/Output settings section. 2. Select the desire scanning mode from the drop-down menu shown as below. 27 11.6" Rugged Tablet M116P/ PT Series User Guide 3. After selecting a desire scanning mode, click on the Save to Device on the side bar. Scanning Mode Description Manual Trigger Presentation Mode Streaming Presentation Mode Snap and Ship Mode When in manual trigger mode, the scanner scans until a bar code is read, or until the trigger is released. Two modes are available, Normal and Enhanced. Normal mode offers good scan speed and the longest working ranges (depth of field). Enhanced mode will give you the highest possible scan speed but slightly less range than Normal mode. Enhanced mode is best used when you require a very fast speed and dont require a long working range. Default =
Manual Triger-Normal. Presentation Mode uses ambient light and scan engine illumination to detect bar codes. When in Presentation Mode, the LEDs remain dim until a bar code is presented to the scan engine, then the aimer turns on and the LEDs turn up to read the code. If the light level in the room is not high enough, Presentation Mode may not work properly. When in Streaming Presentation mode, the scan engines aimer goes out after a short time, but the scan illumination remains on all the time to continuously search for bar codes. Two modes are available, Normal and Enhanced. Normal mode offers good scan speed and the longest working ranges (depth of field). Enhanced mode will give you the highest possible scan speed but slightly less range than Normal mode. Enhanced mode is best used when you require a very fast scan speed and dont require a long working range. been a hardware trigger pull. When in Host Notify Mode, it is up to the host to initiate an Image Snap and/or an Image Ship command. It is also up to the host to switch to another trigger mode. Snap and Ship mode, allows you to bypass the decoder and ship an imagedirectly to the host. In this mode, an image is taken and shipped upon eachtrigger pull, instead of being sent to the decoder. Snap and Ship is useful whenyou are using your own decoder. Host Notify Mode Host Notify Mode bypasses the decoder and notifies the host that there has 4.4.6.3 Setting the 1D/2D Barcode Scanner Symbologies The barcode scanner is shipped with default settings shown below. If the default setting suits the usage requirement, setting symbologies is not necessary. Chapter 4: Operating the Device 28 Symbologies Default Settings:
UPC-A/EAN-13 Extended Coupon Code GS1 DataBar Omni-Directinal GS1 DataBar Limited GS1 DataBar Expanded Symbologies UPC-A UPC-E EAN/JAN-8 EAN/JAN-13 UPC-E1 Code 39 Code 128 ISBT 128 GS1-128 Interleaved 2 of 5 Matrix 2 of 5 NEC 2/5 IATA 2/5 Code 2/5 Codabar Code 93 Code 11 MSI Telepen Trioptic Code Postal Code Planet Code Korea Psot China Post Australian Post Data Matrix PDF 417 Micro PDF 417 Codablock A Codablock F Maxicode QR Code Aztec Composite Code Han Xin Default Enable Enable Enable Enable Disable Disable Enable Enable Enable Enable Enable Disable Enable Enable Disable Enable Disable Disable Enable Enable Disable Disable Disable Disable Disable Disable Disable Disable Disable Enable Enable Enable Disable Disable Disable Enable Enable Disable Disable Linear 2D Changing default setting of symbologies or the advanced setting There are two methods tochange the default setting of symbologies or other advanced setting:
Method (1). Click on the Symbologies symbology to the default setting or make advanced setting by its category.After setting, click on the Save to Device on the side bar. on the top, then you can change the Method (2). Click on the reset to default button on the side as shown blow:
29 11.6" Rugged Tablet M116P/ PT Series User Guide Important:
The reset to default button will change all setting to default. N660X could disconnect with system after clicking the reset to default button. If the Disconnection happened please scan barcodes below in the following steps. Step1. Scan the USB HID barcode:
Step 2. Thenscan the USB keyboard barcode:
Step 3.Run EZConfig-Scanning again by following 4.4.6.1Device Configuring and Setting 4.4.6.4 Adding a Prefix or Suffix 1. To add a Prefix or Suffix please click on Data Formatting icon. 2.Click on Editor button under the Prefix or Suffix section and create Prefix/Suffix value by typing in the block or select desire characters in the Control chars, Printable chars, and Extended ASCII. as shown below:
Chapter 4: Operating the Device 30 3. When you finish creating Prefix/Suffix, please click on Save to Device on the side bar. 4. For checking the functionality of Prefix/Suffix, please chick on Scan Data Window icon on the top. Then scan a barcode to verify if the Prefix/Suffix appear correctly. 31 11.6" Rugged Tablet M116P/ PT Series User Guide 4.4.7 Using the HF RFID Reader The HF RFID Reader is optional for M116P/ PT Series Rugged Tablet and is not re-workable by the end user. To use this feature, please make sure the tablet PC is built-in HF RFID reader before use, or contact our sales contact window for more details. To enable the HF RFID Reader feature:
1. Launch the HottabUtility 2. Tap on the Device ON/OFF button. 3. Tap on RFID, and the setting utility will show up as below:
. 4. Tap on the ON button. 5. Check the status color of the ON icon is green, and the status color of the RFID icon on the Hottab menu is orange at the same time. Item Status Color Description Orange White HF RFID Reader is enabled. HF RFID Reader is disabled. RFID Chapter 4: Operating the Device 32 4.4.7.1 RFID Trigger Setting Auto Scan The default setting for RFID trigger is Auto Scan. Under this setting, the RFID Reader will always be ready to scan tags. 1. When the RFID tag is detected from RFID antenna, the data will be read automatically. 2. User can define the RFID scanning frequency from the drop-down menu shown as below. The frequency can be from 1 second to 9 seconds. Single Scan User can also define the RFID Reader scanning as Single Scan. Under this setting, the RFID Reader will be triggered only when user click Send. 33 11.6" Rugged Tablet M116P/ PT Series User Guide 4.4.7.2 Settings TheSound check box defines whether a beep sound will come with the data Sound scanning. This setting defines the output type of the scanned data. Two options are available:
Output to Keyboard Wedge Under this setting, the data scanned is sent like keyboard data. The scanned data can be output directly to the demo area below this window, or user can also open other utility, such as Office Word or Notepad files, for data input. Demo Area Note:notice that the input method should support the scanned character. User can also tap on the Settings button for further details settings. Chapter 4: Operating the Device 34 Item Prefix Suffix Append Enter Append TAB Regex Filter Description User can type in this field to define the characters BEFORE the data scanned. User can type in this field to define the characters AFTER the data scanned. The check box user can defines to append an Enter which is followed by the characters. The check box user can defines to append anTAB which is followed by the characters. Press on Presets button, user can define how many characters to show after the data scanned. Replace User can define specific characters to be replaced with preferred characters automatically. When the characters defined in Regex Substitution is scanned, the data will be replaced with the one filled in Replace with. Reset to default User can remove all the set up and back to default mode. SDK For users following SDK for software porting, the scanned data can also be output with the format needed. 35 11.6" Rugged Tablet M116P/ PT Series User Guide Note:
User can download the SDK from Winmate Download center website
>>M116P>>Development Kit or check the Driver CD which is shipped with the tablet. 4.4.7.3 RFID Output Setting I Select RFID Output Type The default setting for built-in HF RFID Reader is to Read UID. For some applications, user might need to read or write further block data; the drop-down menu under this section can do this change. Disconnect User can tap on the Disconnect button to stop the connection with built-in HF RFID reader.
*To recover the connection, please turn off the module from setting UI and then turn on the module again. 4.4.8 Turn on/off the Light Sensor The Light Sensor can be turned on/off from Hottab menu. To enable/disable the Light Sensor, perform the following procedure:
1. Launch the HottabUtility 2. Tap on the Device ON/OFF button. 3. Check the status color of the Light Sensor icon:
. Item Status Color Description Light Sensor Orange White Light Sensor is enabled. Light Sensor is disabled. Chapter 4: Operating the Device 36 4.4.9ChangingTouchscreen Modes The tablet computer supports three built-in operating modes for different usage scenarios:
Mode Description Hand/Rain (Default) Stylus Bare fingertips Active stylus with palm rejection In Hand/Rain mode the touchscreen rejects false inputs from liquid drops. When the liquid is removed, the touchscreen accepts touch inputs from bare fingertips. Supportsinput by:
Rubber tip passive stylus In Stylus mode, the touchscreen supports inputs from the fine-tip passive capacitive stylus (shipped with tablet). Support input by:
Rubber tip passive stylus In Glove mode, the touchscreen supports inputs while the user is operating the touchscreen with gloves on. Supports input by:
Glove Rubber tip passive stylus Fine-tip passive stylus with palm rejection Active stylus with palm rejection Bare fingertips Bare fingertips Glove To change touch mode:
Launch the Hottab Utility
.Choose Device ON/OFF,and then click Touch Set icon. 4.4.9.1 Switch via Built-in HotTab Utility To switch touchscreen mode via the HotTab:
1. Launch the HottabUtility 2. Choose Device ON/OFFand then click on
. Touch Set icon 3. Under the Touch Mode, select the desired touch modes by tapping on the radio button. 4. Heres also additional Touch related setting to switch the touchscreen input between mouse mode with cursor, or with multi-touch mode:
Mouse Mode:Single touch point supported, with mouse cursor shown. Multi-touch Mode:The default setting of the touch screen supports multi-touch mode (up to 10 points) 4.4.9.2 Switch via Programmable Function Buttons:
To switch between the different touchscreen modes via the programmable function buttons, make sure the touchscreen mode switching is set to the programmable function buttons first. 37 11.6" Rugged Tablet M116P/ PT Series User Guide 1. Launch the HottabUtility
. 2. Tap on the Setting button. 3. Tap on F1 icon. 4. Tap on the Long Press icon. 5. Change the Long Press function to Touch Mode as shown below:
Once the touchscreen mode switching is set to the programmable function button, Long Press on F1 function button to cycle through the different touchscreen modes. When touchscreen mode is switched, an icon will temporarily overlay on the lower center of the screen to indicate current touchscreen mode:
4.4.10Using the Expansion Module The Expansion Port is optional for M116P/ PT Series Rugged Tablet and is not re-workable by the end user. To work with Add-on module, please make sure the tablet PC is built-in expansion port before use, or contact our sales contact window for more details. The Ext. Module function allows users to choose either UHF RFID Reader or Smart Card Reader. Chapter 4: Operating the Device 38 1. Open the Hottab utility by press the
(Menu) Button located on the front panel, OR launching the Caution Do not open when the expansion port is not used To enable the add-on module from expansion port:
Hottab Utility application. 2. Tap on the Device ON/OFF button. 3. Check the status color of theExt. Module icon:
Item Status Color Description Orange White Expansion Module is enabled. Ext. Module is disabled. Ext. Module 4.4.11 UHF RFID Reader Module The UHF RFID Reader is optional for M116P/ PT Series Rugged Tablet. Note:
Download the SDK from Winmate Download center.
>>M116P>>Development Kit or check the Driver CD which is shipped with the tablet. 4.4.11.1 How to Install 1. Remove expansion port cover from the rear side of Tablet PC. 2. Remove the top two screws of the I/O cover. 3. Align the pogo pin on UHF RFID module to the expansion port of Tablet PC; screw to fix the module on tablet. 39 11.6" Rugged Tablet M116P/ PT Series User Guide 4.4.11.2 How to Use below:
1. Launch the Hottab Utility 2. Choose Device ON/OFFand click on Ext. Module, and the setting utility will show up as
. 3. Tap on the ON button. 4. Check the status color of the ON icon is green. Trigger Setting Auto Scan The default setting for UHF RFID trigger is Auto Scan. Under this setting, the UHF RFID Reader will always be ready to scan tags. 1. When the UHF RFID tag is detected, the data will be read automatically. 2. User can define the UHF RFID scanning frequency from the drop-down menu shown as below. The frequency can be from 1 second to 9 seconds. Single Scan User can also define the UHF RFID Reader scanning as SINGLE SCAN. Under this setting, the UHF RFID Reader will be triggered only when user click on Send. Chapter 4: Operating the Device 40 Settings Sound The Sound check box defines whether a beep sound will come with the data scanning. Region Based on different regional regulations about UHF RFID frequencies, user can switch frequency to NA
(North America, 902-928 MHz) or EU3 (Europe, 865-868 MHz)from the drop-down menu shown as below. Output to Keyboard Wedge: Under this setting, the data scanned is sent like keyboard data. 41 11.6" Rugged Tablet M116P/ PT Series User Guide SDK: For users following SDK for software porting, the scanned data can also be output with the format needed RFID Output To This setting defines the output type of the scanned data. Two options are available:
Keyboard Wedge Under this setting, the data scanned is sent like keyboard data. The scanned data can be output directly to the demo area below this window, or user can also open other utility, such as Office Word or Notepad files, for data input. Important:
Please notice that the input method should support the scanned character. TapSettings button for further details settings. Chapter 4: Operating the Device 42 Prefix Type in this field to define the characters BEFORE the data scanned. Suffix Type in this field to define the characters AFTER the data scanned. Append Enter To define to append an Enterthis is followed by the characters. Append TAB To define to append a TABthis is followed by the characters. Regex Filter Press on Presets button, user can define how many characters to show after the data scanned. Replace To define specific characters to be replaced with preferred characters automatically. When the characters defined in Regex Substitutionis scanned, the data will be replaced with the one filled in Replace with.Reset to default To remove all the set up and back to default mode. Note:For more information, please download UniversalReaderAssistant UHF module configuration application from Thing Magic website. RFID Output Setting EPC Code), including The EPC check box defines whether to show the complete information of EPC (Electronic Product 1. The identifiers of the object(s) or other entities that are the subject of the event. 2. The date and time when the event took place, and the local time zone in effect. 3. The identifier of the location at which the event occurred. 4. TheInformation about the business context. 43 11.6" Rugged Tablet M116P/ PT Series User Guide Disconnect / Connect User can tap on the Disconnect button to stop the connection with UHF RFID Reader.
*To recover the connection, please turn off the module from setting UI and then turn on the module again. Chapter 5: Frequently Used Settings 44 Chapter 5: Frequently Used Settings 5.1 Screen Resolution Scaling and Setting The M116P/ PT Series Rugged Tablets 1920 x 1080 Full HDhigh resolution display is perfect for viewing image, video, or other applications; however, Windows user interface (icons, buttons, and other user interface elements) may be too small to read and operate at the default Windows settings. By changing the display scaling or the display resolution setting of the device, you can adjust the size of the text and other items on the desktop for optimal viewing. Display scaling is the recommended method because it has the effect of adjusting user interface element without having to move away from the optimal resolution setting at 1920 x 1200. This section will explain how you can adjust the built-in windows display scaling setting and resolution setting. Note:
The Tablet computer is shipped with display scaling set at Larger - 150%. We recommend the users set the scaling to this setting for optimal text and image viewing. Before proceeding to change the scaling option, make sure any opened document is saved and close, and all running applications are closed before proceeding to change the display scaling, because this procedure requires users to log out of their account to apply display scaling change. 5.1.1 Changing Display Scaling(Recommended) Perform the following to change display scaling setting:
1. Tap and hold anywhere on the desktop for 3 seconds and release to bring up the context menu, and select Display settings option as shown below:
2. A Display Window will show up. Click on the dropdown option under the Scale and layoutsection andchange the scaling option to 150% (Recommended) or any other desired display scaling. 45 11.6" Rugged Tablet M116P/ PT Series User Guide 5.1.2 Changing Screen Resolution Alternatively, instead of changing the display scaling setting, user may choose to change the overall resolution setting to make screen elements bigger. 1. Tap and hold anywhere on the desktop for 3 seconds and release to bring up the context menu, and select Display settings option as shown below:
2. Click on the dropdown option next to Resolution and select the desire resolution by tapping on the scale:
Chapter 5: Frequently Used Settings 46 3. Hit Apply. A prompt Display Settings prompt will show up to ask the user if the applied resolution is usable. 4. If the new resolution is the desired display setting hit Keep changes and continue to next step. If the new resolution is not desirable, hit Revert and select a different resolution to change to, and start again from Step 2. 5. The user may now use the device with the new resolution setting. 5.2 ReplacingBattery The M116P/ PT Series Rugged Tablet supports hot-swap, meaning the tablet doesnt need to be powered off to replace the main battery. To support hotswap, there is a backup battery inside the tablet that is charged together with the main battery. This battery cannot be removed, and requires adequate power for main battery hot swapping. When the backup battery is fully charged, the tablet can sustain up to 5 minutes of runtime for battery hot-swapping. CautionCharge the built-in back-up battery every two months to keep battery health and prevent possible issues from battery over-discharge. AttentionChargez la batterie de secours intgre tous les deux mois pour conserver la sant de la batterie et viter les problmes de dcharge excessive de la batterie. Perform the following to hot swap the batteries:
1. Power on the tablet, open Hottab to check the power level of the Backup battery. 2. If the Backup battery level is Low, please charge the tablet with AC Power until the Backup battery level is Medium or High, and do not remove the main battery. 3. If the Backup battery level is at Medium or High, you can remove the main battery. 4. Insert a new fully charged battery into the battery compartment. 5. Pen Hottab to check Main battery level. If the battery level is displayed incorrect, check if the new removable battery is inserted properly. 6. If the battery level displayed correct, continue using the tablet. 47 11.6" Rugged Tablet M116P/ PT Series User Guide To remove the battery pack:
1. Shut down the tablet (or put into sleep mode). Turn the tablet computer over, back facing up. 2. Pushthe Battery Lock Latch it to the Unlocked position. 3. Pull up and holdthe Battery Release Slider that is spring-loaded. 4. Lift the battery out using the opening on the side of battery compartment. 5.3 Using Recovery Wizard to Restore Computer M116P/ PT Series Rugged Tablet has a dedicate recovery partition stored on the hard drive of the tablet to enable quick one-key recovery process. This partition occupies about 11GB of the storage space, and comes built-in to each M116P/ PT Series Rugged Tablet. Warning!Before starting the recovery process, be sure to backup all user data, as all data will be lost after the recovery process. Attention! Avant de dmarrer le processus de rcupration, assurez-vous de sauvegarder toutes les donnes utilisateur, car toutes les donnes seront perdues aprs le processus de rcupration. Follow the procedure below to enable quick one-key recovery:
1. Plug-in the AC adapter to the tablet computer. Make sure the tablet computer stays plugged in to power source during the recovery process. 2. Power on the tablet computer, and when the boot screen shows up, press the Fn1 button
(Recovery Key) on the front bezel OR press F6when using an external USB keyboard to initiate the Recovery Wizard. 3. The following screen shows the Recovery Wizard. Click on Recovery button to continue. 4. A warning message about data loss will show up. Make sure data is backed up before recovery, and click on Yes to continue. Chapter 5: Frequently Used Settings 48 5. Wait till the recovery process to complete. During the recovery process, a command prompt will show up to indicate the percent of recovery process. 6. After recovery is completed, please press any key to continue, and the tablet computer will shut down automatically. 49 11.6" Rugged Tablet M116P/ PT Series User Guide 5.4Docking Connector Pin Definition The M116P/ PT Series Rugged Tablet supports one 19-pin docking connector at the bottom side. The pin definition is listed as the following table. Pin No. Description Pin No. Description 1 2 3 4 5 6 7 8 9 10 RF_GND DOCK_DET
GPS ANT RF_GND RF_GND NC NC DETECT+
Power Power 11 12 13 14 15 16 17 18 19 NC NC GND Power USB+
USB-
GND GND DETECT-
5.5COM Port Definition The M116P/ PT Series Rugged Tablet useHottab utility for built-in peripherals control. All the COM port numbers have been defined in the OS image coming with the package. COM Port Device COM 1 COM 2 COM 3 COM 4 COM 9 COM 11 COM 15 HF RFID (Optional) Bluetooth Auto Pairing Reserved Reserved GPS Barcode RS232 at Docking (o=Optional) For some special applications, user might re-install OS and lose the COM port settings. To make sure the features works properly with HottabUtility, please follow the procedure below to re-define the COM port numbers:
1. Go to "Device Manager", right click on the COM number need to be changed, and tap on"Properties" to open the setting page. 2. Tap on "Port Setting" tab and click on "Advanced" button. Chapter 5: Frequently Used Settings 50 3. Tap on the dropdown list and choose the correct COM Port Number (refer to the COM Port Definition Table), and click "OK". 4. Double-check "Device Manager" to make sure the COM Port number has been re-defined successfully, and then restart the system. 5.6 GigaLAN Port Definition Notice that GigaLAN port is an optional feature of the M116P/ PT Series Rugged Tablet and may not be present in your device. Please check your order specifications for more details. Pin Signal Name Pin Signal Name 1 3 5 7 TX1+
TX2+
TX3-
TX4+
2 4 6 8 TX1-
TX3+
TX2-
TX4-
51 11.6" Rugged Tablet M116P/ PT Series User Guide 5.7Pairing with a Wireless Bluetooth Barcode Scanner The computer is affixed with a Bluetooth MAC (Media Access Control) address barcode label that enables wireless Bluetooth Barcode Scanner to quickly establish Bluetooth connection with the computer. It is encoded with leading characters to instruct the wireless Bluetooth barcode scanner to initial Bluetooth Serial Port Profile pairing request. 5.7.1 Setup Computer for Bluetooth Pairing To start the pairing process, first perform the following steps to ensure the computer is properly setup for pairing:
1. Locate the Bluetooth icon in the Notification Area 2. Bring up the Contextual Menu by performing long press on the icon with touchscreen or right-
click on the icon with a mouse, and select Open Settings. 3. Once the Bluetooth & other devicesMenu appears, click More Bluetooth options under Related settings section as shown below. Chapter 5: Frequently Used Settings 52 4. go to Options tab, and make sure that in the Discovery section, the computer is set to Allow Bluetooth devices to find this computer, as shown below:
Click OK to continue. 5. In theBluetooth Settingsmenu, go to COM Ports tab. COM port has to be setup for the wireless Bluetooth Barcode Scanner to communicate via the Bluetooth Serial Port Profile. Click on the Add button. 53 11.6" Rugged Tablet M116P/ PT Series User Guide 6. You are in Add COM Port window. Choose Incoming (device initiates the connection), and click OK. 7. The computer will automatically assign COM Port to the Bluetooth connection. In the screenshot below, COM4 is allocated. Click OK to continue. Chapter 5: Frequently Used Settings 54 8. Next, the user has to configure the application that is used to accept the scanned data from the wireless Bluetooth Barcode Scanner. The application has to be configured to accept the same COM Port that has been assigned for the Bluetooth Serial Port Profile in the previous step. Important:Make sure the application stays open while pairing. 9. Now the computer is ready for pairing process to start 5.7.2 Set up the Barcode Scanner for Bluetooth Pairing ImportantThe wireless Bluetooth Barcode Scanner has to be configured as Bluetooth Serial Port Profile Master device to establish connection via Bluetooth MAC address barcode label. For a more detailed instruction, please refer to the User Guide for the wireless Bluetooth Barcode Scanner you are using for paring. Now the Barcode Scanner is ready for pairing process to start. 5.7.3 Perform Bluetooth Pairing After you finish setting up both the Computer and Barcode Scanner you are ready to start pairing. 1. Open aprogram that is used for paring. 2. Perform scanning procedures. A Bluetooth notification window pop-up on the right hand side of the desktop. Left click on the mouse to enter Add a device menu. 3. Locate the Bluetooth icon in the Notification Area. 4. Click Add Bluetooth Device. 55 11.6" Rugged Tablet M116P/ PT Series User Guide 5. In Add a Bluetooth Device window, click Nextto connect the Barcode Scanner to the Computer. In order to ensure that Bluetooth Device is successfully pared to the Computer, follow the steps below:
1. Locate the Bluetooth icon in the Notification Area. Select Show Bluetooth Devices. You can access this menu in the Control Panel:
Windows Control Panel Devices and Printers Bluetooth Devices 2. Make sure your device is connected to the Computer. Chapter 6: Troubleshooting 56 Chapter 6: Troubleshooting 6.1 Basic Troubleshooting Problem Solution The removable battery is not charging. Make sure the AC adapter is properly connected, and that the removable battery is properly inserted. Nothing appears on the screen. The tablet computer may be in sleep mode. Press the power button to wake up the display. The brightness level may be too low. Increase The screen suddenly turns blank and the power indicator goes off. Make sure that LED indicator is not powered off in brightness. Hottab. Wireless LAN signal quality is poor. The tablet computer may be out of range. Move the I cannot connect to another wireless LAN device. Make sure that wireless LAN feature is powered on. Make sure that the SSID setting is the same for every I cannot connect to another device with Bluetooth. The GPS application cannot find my location. Make sure that GPS is powered on in Hottab. Make sure that GPS receiver and the location sensor Make sure the AC adapter is properly connected. If running on battery power, the battery may be depleted, charge the battery. tablet computer closer to the access point or another wireless LAN device associated with it. Check if your surroundings have interferences, such as microwave ovens, cordless phones. Move the tablet computer away from objects causing interference. wireless LAN device in the network. Restart the tablet computer Make sure the IP address or subnet mask setting is correct. Make sure that both devices have Bluetooth powered on (For the Tablet Computer, check Hottab to see if Bluetooth is powered on). Make sure that the distance between the two devices is within 10 meters and there are no walls or large obstructions between the devices. Make sure the both devices are powered on and configured to be discoverable. Make sure that both devices are compatible. are enabled in Control Panel. The tablet computer may be out of coverage area. Move your tablet computer outdoors or closer to a window. Check if your surroundings have interferences, such as microwave ovens, cordless phones. Move the tablet computer away from objects causing interference. 57 11.6" Rugged Tablet M116P/ PT Series User Guide Problem No sound is produced. Solution Adjust volume of the tablet computer by pressing on the volume rocker. If using an external audio device, make sure that the cable is properly connected. I cannot project the tablet computer display to another monitor. Make sure the VGA driver is installed. Make sure the output setting selected is correct. Barcode scanner does not emit laser beam and does not seem to work. Hottab utility. Make sure the Barcode scanner device is enabled in Make sure under Windows, the Barcode Reader is set to COM 15 port, so that Hottab can trigger the Barcode Reader hardware. Barcode Scanner emits laser beam but does not read barcode presented to it. Adjust the distance between barcode scanner of the device and the barcode being scanned. Make sure the barcode code type is enabled in the I am having GPS accuracy issue tablet. To enable/disable a specific barcode code type, go through the Barcode Scanner Configuration section. When utilizing the GPS function, we recommend disabling the Barcode Reader in Hottab to reduce interference. RFID scanner does not seem to work. to COM 3 port. Make sure under Windows, the RFID hardware is set Battery leaking or swollen The lithium battery used in this tablet may swell after being charged/ discharged many times, but there is no problem regarding safety. Continued use in such a state may result in the battery getting jammed, so please stop using the battery, and purchase a new one. 58 M116P Rugged Tablet User Guide Appendix Appendix A: Product Specifications Model Name M116P M116PT Size 11.6-inch display with LED Backlight 11.6-inch display with LED Backlight Resolution 1920 x 1080 Full HD 1920 x 1080 Full HD Panel Brightness Contrast Ratio 850 nits with direct optical bonding for sunlight readability 1000:1 850 nits with direct optical bonding for sunlight readability 1000:1 Viewing Angle 89/89/89/89 89/89/89/89 Touch Projected capacitive multi-touch Projected capacitive multi-touch Technology Processor Anti-glare technology Automatic screen rotation Anti-glare technology Automatic screen rotation Intel Pentium N4200 , 1.1GHz
(turbo to 2.5GHz) Intel Pentium N4200 , 1.1GHz
(turbo to 2.5GHz) System Memory 4GB LPDDR4 RAM 1 (up to 8GB) 4GB LPDDR4 RAM 1 (up to 8GB) Graphics Intel HD Graphics 504 Intel HD Graphics 504 128GB SSD (options up to 512GB) Additional storage available with micro SDXC card slot 128GB SSD (options up to 512GB) Additional storage available with micro SDXC card slot Operating System Windows 10 IoT Enterprise (64 bit) Windows 10 IoT Enterprise (64 bit) Light sensor/ g-sensor / Gyro / E-
compass 802.11 a/b/g/n/ac WiFi Light sensor/ g-sensor / Gyro / E-
compass 802.11 a/b/g/n/ac WiFi Bluetooth 5.0 GPS, GLONASS Bluetooth 5.0 GPS, GLONASS Docking Connector 1 x 19-pin docking connector 1 x 19-pin docking connector HDMI 1 x micro HDMI 1 x micro HDMI 1 x USB 3.0 (Type A), 1 x USB 3.0
(Type C) Note: The USB Type-C connector follows USB 3.0 standard, which does not support Alternate Mode
(ALT) or USB Power Delivery (USB-
PD). 1 x USB 3.0 (Type A), 1 x USB 3.0
(Type C) Note: The USB Type-C connector follows USB 3.0 standard, which does not support Alternate Mode (ALT) or USB Power Delivery (USB-PD). 1 x Audio combo connector (Mic in or Line Out) 1 x RJ45-10/100/1000 GigaLAN port
(Optional)2 1 x Audio combo connector (Mic in or Line Out) 1 x RJ45-10/100/1000 GigaLAN port
(Optional)2 GigaLAN Port 1 x RJ45 Connector (Optional)2 1 x RJ45 Connector (Optional) 2 Micro SIM 1 x Micro SIM card slot 1 x Micro SIM card slot mini PCIe 1 x Mini PCIe 1 x Mini PCIe Buttons Touch 1 x Power; 3 x function keys Intel Pentium N4200 , 1.1GHz
(turbo to 2.5GHz) 10-point multi-touch, supports Rain /
Glove / Stylus Modes 10-point multi-touch, supports Rain /
Glove / Stylus Modes Storage Sensors WLAN Bluetooth GNSS USB Audio LAN Display Specification System Specification Wireless Communications Input Interfaces Power Input 1 x Power Jack 1 x Power Jack Micro SD 1 x Micro SDXC slot 1 x Micro SDXC slot Status Indicators LED Indicators Power, Battery, HDD, RF Power, Battery, HDD, RF 59 M101S Rugged Tablet User Guide Model Name M116P M116PT Audio Cameras Data Capture Security Function Mechanical Environment Standards and Certification Microphone Built-in dual digital mic with noise cancellation Built-in dual digital mic with noise cancellation Speaker 2 x 1 watt front-facing speakers 2 x 1 watt front-facing speakers Web Camera Rear Camera Integrated Add-on Module 3 Security Mobile Device Management Power Input 2MP front camera 8MP rear camera with autofocus and LED light Optional 1D/2D Barcode Reader Optional HF RFID Reader OptionalSmart Card Reader, complies with IS07816-1.2.3T=1 and T= protocol Optional add-on UHF RFID Reader or Smart Card Reader Trusted Platform Module (TPM) 2.0 4 Kensington Lock 2MP front camera 8MP rear camera with autofocus and LED light Default Smart Card Reader, complies with IS07816-1.2.3T=1 and T=
protocol,Optional 1D/2D Barcode Reader,Optional HF RFID Reader Optional add-on UHF RFID Reader Trusted Platform Module (TPM) 2.0 4 Kensington Lock SOTI Mobicontrol compatible 5 SOTI Mobicontrol compatible 5 19V DC 19V DC AC Adapter 100-240V, 50-60Hz (19V DC) 100-240V, 50-60Hz (19V DC) Hot-swappable 7.7V typ. 5900 mAh Li-Polymer Battery (2S1P) Optional 7.4V typ. 10280 mAh Li-Polymer Battery (2S2P) Hot-swappable 7.7V typ. 5900 mAh Li-Polymer Battery (2S1P) Optional 7.4V typ. 10280 mAh Li-Polymer Battery (2S2P) Battery Operating Time Dimensions Std. Battery: 8 hours 6 Std. Battery: 8 hours 6 300.67 x 201.97 x 22.5 mm 300.67 x 201.97 x 22.5 mm Weight 1.4 kg 1.4 kg Operating Temp.
-20C ~ +60C (AC Mode),-10C ~
+50C (Battery Mode)
-20C ~ +60C (AC Mode),-10C ~
+50C (Battery Mode) Humidity IP Rating Shock Vibration Drop EMC 10 to 90% RH, non-condensing 10 to 90% RH, non-condensing IP65, dustproof and waterproof IP65, dustproof and waterproof MIL-STD-810G Method 516.6 Procedure I MIL-STD-810G Method 514.6 Procedure I MIL-STD-810G Method 516.6, 4 ft, Free to concrete MIL-STD-810G Method 516.6 Procedure I MIL-STD-810G Method 514.6 Procedure I MIL-STD-810G Method 516.6, 4 ft, Free to concrete CE, FCC CE, FCC Power Management Battery 1. Total usable memory will be less depending upon actual system configuration. 2. LAN and GigaLAN Port are mutually exclusive options. 3. Add-on modules require the expansion port option to be usable. 4. TPM 2.0 available upon request. 5. SOTI is available upon request. 6. Measured at dimming LCD brightness. Varies depending on the usage conditions, or when an external device is attached. 7. Length measurements do not include protrusions. Weight varies with options and active pen. Winmate Inc. 9F, No.111-6, Shing-De Rd., San-Chung District, New Taipei City 24158, Taiwan, R.O.C www.winmate.com Copyright 2018 Winmate Inc. All rights reserved.
1 | ID Label/Location Info | ID Label/Location Info | 171.77 KiB | March 18 2020 / March 25 2020 |
Product Name : Rugged Tablet PC Model No: M116P Rating : +19V==3.42A Manufactured Date :
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numrique de la classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. FCC ID : PX9M116P001 IC :9911A-M116P001 Contains FCC ID : PX9-AC9260NGW CG IC : 9911A-AC9260NGW Winmate Inc. 9F, No.111-6, Shing-De Rd., San-Chung Dist., New Taipei City 24158, Taiwan Part number of this label 910000003353 MADE IN TAIWAN TU Tu pg TT pea Tipaeauy Pi leah AE ria pa Na eR UE Es eae mca tS tn Pa eae
1 | Declaration of authorization | Cover Letter(s) | 13.44 KiB | March 18 2020 / March 25 2020 |
Winmare Declaration of Authorization We Name: FCC: Winmate Inc./ IC: Winmate Communication Inc. Address:9F, No.111-6, Shing-De Rd., San-Chung Dist., City: New Taipei City Country: Taiwan Declare that:
Name Representative of agent: Chenz Ker Agent Company name: MRT Technology (Taiwan) Co., Ltd Address: : . a No. 38, Fuxing Second Rd., Guishan Dist., City: Taoyuan Country Taiwan is authorized to apply for Certification of the following product(s):
Product description: Rugged Tablet PC FCC ID: PX9M116P001 IC: 9911A-M116P001 Type designation: M116P Trademark: Winmate Validity expiry date:2020/4/23 on our behalf. Date: 2020/02/24 City: New Taipei City Name: Chini Liao Function: Manager an -
Ch wr Les Signature: eseecececeeeeeereee een eeenes RF_160, Issue 04
1 | Request for confidentiality | Cover Letter(s) | 29.36 KiB | March 18 2020 / March 25 2020 |
FCC, Request for non-disclosure Date: 19-Oct-10 RF_501, Issue 7 Page 1 of 1 Company Name: Winmate Inc. Address: 9F, No.111-6, Shing-De Rd., San-Chung Dist, City: New Taipei City Country: Taiwan To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC 1D: PX9M116P001 Reference number: HHH Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:
LD Bitll(s) of Material KX] Block Diagrams KX] Operational Description [K] Schematic Diagrams D Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47:CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (note 1):
(J Internal Photos [1] Users Manual CD Test Set-up Photos C1 External Photos JUSHAICATIOM: ec ceassecnesnecsesesessessesenacssnesssnsssssusssuesenessesesueaesceneeseoesseosssesaeseeussesaenecueneseeseenenatenteessenees Planned Release Date STC: (notes 2,3, 4,5). If no date is given, 45 days from grant date will be used. Date: 2020/02/24 Name and signature of applicant: Chini Liao oh \ Ly VWs ow Notes:
1) A document or type of document can only have ONE type of confidentiality!
2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!
3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!
5) Request for extension or for release must be received by Telefication at teast 7 days before date of actual marketing or before expiration of the STC period
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2020-03-25 | 13.56 ~ 13.56 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2020-03-25
|
||||
1 | Applicant's complete, legal business name |
Winmate Inc.
|
||||
1 | FCC Registration Number (FRN) |
0026656835
|
||||
1 | Physical Address |
9F, No.111-6, Shing-De Rd., San-Chung District
|
||||
1 |
New Taipei City, N/A
|
|||||
1 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
c******@telefication.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
PX9
|
||||
1 | Equipment Product Code |
M116P001
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
C******** L******
|
||||
1 | Title |
R&D Manager
|
||||
1 | Telephone Number |
886-2******** Extension:
|
||||
1 | Fax Number |
886-2********
|
||||
1 |
c******@winmate.com.tw
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
MRT Technology (Taiwan) Co., Ltd
|
||||
1 | Name |
C**** K****
|
||||
1 | Physical Address |
No. 38, Fuxing Second Rd., Guishan Dist.
|
||||
1 |
Taiwan
|
|||||
1 | Telephone Number |
886-3********
|
||||
1 | Fax Number |
886-3********
|
||||
1 |
c******@mrt-cert.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
MRT Technology (Taiwan) Co., Ltd
|
||||
1 | Name |
C******** K****
|
||||
1 | Physical Address |
No. 38, Fuxing Second Rd., Guishan Dist.
|
||||
1 |
Taiwan
|
|||||
1 | Telephone Number |
886-3********
|
||||
1 | Fax Number |
886-3********
|
||||
1 |
c******@mrt-cert.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Rugged Tablet PC | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
MRT Technology (Taiwan) Co.,Ltd
|
||||
1 | Name |
C**** K********
|
||||
1 | Telephone Number |
+886-********
|
||||
1 | Fax Number |
+886-********
|
||||
1 |
c******@mrt-cert.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 13.56000000 | 13.56000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC