FCC ID: PX9M700DQ8002 Rugged Tablet PC

How to Start your M700DQ8 How to Scan a Barcode How to Change Scanning Settings 1) Charge the Battery Use the bundled AC adapter and USB cable to charge the Tablet for 4 hours. 1) Tear off protective film from the barcode. 2) Press power button located on the top and swipe up from To change scanning settings 1) Open WDC application. bottom on the screen to unlock the screen. 2) Open Barcode Settings , tap Trigger Settings. 3) Open Search application or other which can edit text. 3) Choose scan type and read time options. 4) Press triggerbutton located on the bottom. MODE TRIGGER OPTIONS Auto Scan Barcode reader starts auto-scanning once the user leaves the WDC application. Multiple Scan After pressing the trigger button barcode reader starts continuously scanning and reading multiple codes within the time duration specified in Read time option. Continuing Scan (Default) After pressing the trigger button barcode reader can scan and read only a single code within the time duration specified in Read time option. To change the symbologies of barcode 1) Open WDC application. 2) Tap Barcode Setting . 3) Tap Barcode Preference. To add command with the output of barcode 1) Open WDC application. 2) In Barcode Setting stap Prefix/Suffix. 3) Enter special characters at the beginning (prefix) or end (suffix) of the scanned barcodes. 4) Tap Set to add to the data. 5) Scan the following barcode to check if your reader is working properly. 4) Change the symbologies of barcodes. Result will be displayed in Search application. Code-39 Optimum scanning DCin Note: For the very first time using, we recommend you charge with the AC adapter. Charging from PCs USB port will take 6 hours or longer. Note: We strongly recommend you always charge your M700DQ8 Tablet with its original charger. Winmates warranty does not cover damage to the mobile device caused by other batteries and/or chargers. 2) Turn On the Tablet To turn on your M700DQ8 series Tablet, press and hold the power button for 3 seconds, located on the top side of the unit. When the device viebrates, release the power button. The LED Indicator will be solid blue during the launching process. The desktop screen will then be displayed once operating system has been launched. Note: For power saving purpose, please enable Connect to PC in Accessibility settings. When connected to PC external 4G, USB and LAN on Docking will be disabled. M700DQ8 Series Rugged Tablet Quick Start Guide v1.0 There's more here. Keep your M700DQ8 updated, and find the latest PC software, user manual, online help and more at Winmate Download Center. Find more accessories for your M700DQ8 at Winmate website www.winmate.com. For the complete user manual and other helpful resources, go to www.winmate.com To know your M700DQ8 more Front View (with Barcode Reader) Rear View (with Barcode Reader) Light Sensor P-Sensor LED Indicator 8MP Front Camera Microphone 13MP Rear Camera with LED auxiliary light Optional 2D Barcode Reader Before starting to use M700DQ8 1) Install Micro SD / SIM card (Optional) The built-in storage space of your M700DQ8 Rugged Tablet is mainly used for system operation. Some functions such as camera or other APP require bigger storage space, please insert a Micro SD card before using. If your M700DQ8 Rugged Tablet supports 3G, Remember to insert a SIM card to activate your data connection. 2) Install and Charge the Battery The battery in your new M700DQ8 Rugged Tablet is not charged yet. Please charge with the bundled USB cable before your first use. Caution! Please dont remove the battery pack or try to take the device apart while charging. These actions may result in some damages and may invalidate your warranty. Caution! Discontinue using device immediately if you notice the battery is swelling, or looks puffy or misshapen. Do not attempt to charge or use the device. Do not handle a damaged or leaking battery. Do not let leaking battery fluid come into contact with your eyes, skin or clothing. 3) Some tips for using and caring your Rugged Tablet. The M70DQ8 Rugged Tablet is designed to resist damages from certain rugged conditions. However, to help care for your M700DQ8, please avoid prolonged or extreme exposure to those conditions. To ensure the rugged design works and protects your Tablet, please be sure the connector covers are closed and the back cover is screwed properly. Dont leave your Tablet near a heat source; this can damage the device. Avoid dropping your Tablet on a hard surface; this can potentially cause damage to the device. To clean your Tablet, use a dry soft cloth. Dont use alcohol or other cleaning solutions. Please dont have your Tablet contact with water when the cover is opened. The water-proof design works only when the outer case is sealed properly. Note: Certain apps and features may not be available in all countries. I/O Protection Cover Docking Connector All-around Elastomeric Rubber 7-inch 1280 x 720 Display Optical-

bonded Touchscreen 3.7V 5300mAh Hotswap Removable Battery Home Menu Return Trigger Microphone How to Install Battery Caution:The lithium battery used in this tablet may swell after being charged/ discharged many times, but there is no problem regarding safety. Continued use in such a state may result in the battery getting jammed, so please stop using the battery, and purchase a new one. 1) Turn Off the Tablet Disconnect AC adapter and power cord from the device. Turn the device over, back facing up. 2) Insert the Battery Push the battery latchInsert the battery on the connector-pins side first, and then lower the battery into the battery compartment. Continue to hold the Battery Release Slider before battery is fully inserted. Waterproof Speaker Inside SIM Card Slot Inside Micro SD Card Slot Caution: Do not insert your fingers into contact hole when inserting the battery. How to Insert SIM / Micro SD Card 1) Turn Off the Tablet Make sure the Tablet is powered off and the USB cable is not connected. Note: To turn off your M700DQ8 series Tabletin Android settings, press and hold Power button till the following window show up. Tap Power off. Note: You can also force the system to shutdown anytime under any operating system by holding the Power button about 8 seconds. 2) Open the I/O Cover 3) Insert SIM Card Pull out the latch to open the I/O cover located on the left side. Insert SIM card with the gold parts facing up and cut-off corner facing in) in the direction of the arrow as shown in the figure. 4) Insert MicroSD Card Pick and raise the SD card holder up in upright position and then put the SD Card into the socket. DCin S D SI M 5) Close the I/O Cover Pull back the latch to close the I/O cover. This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device FCC Warning does not cause harmful interference..

(1) This device may not cause interference; and operation of the device. the user's authority to operate the equipment.

(2) This device must accept any interference, including interference that may cause undesired Any Changes or modifications not expressly approved by the party responsible for compliance could void Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the IC Warning following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes :

( 1 ) Ce dispositif ne peut causer d'interfrences ; et

( 2 ) Ce dispositif doit accepter toute interfrence , y compris les interfrences qui peuvent causer un mauvais fonctionnement de l'appareil. The device for operation in the band 51505250MHz is only for indoor use. RF Exposure Information and Statement The SAR limit of USA/Canada (FCC/IC) is 1.6 W/kg averaged over one gram of tissue. Device types:

M700DQ8 (FCC ID: PX9M700DQ8002, IC: 9911A- M700DQ8002) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use the body is 1.459W/kg. This device was tested for typical body-worn operations with the back of the handset kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Le SAR limite pour les USA/Canada (FCC/IC) est de 1.6 W/kg moyen sur un seul gramme de tissu.La valeur maximale dclare sous ce critre lors de la certification du produit pour lutilisation du corps est de 1,345 W/kgOprations typiques avec la partie arrire de la manoeuvre garde 0mm du corps, afin de 1,459 W/kgOprations typiques avec la partie arrire de la manoeuvre garde 0mm de maintenir la conformit avec les exigences du FCC relatives lexposition RF,Lutilisation des accessoires qui maintiennent une distance de sparation de 0mm entre le corps de lutilisateur et le dos de la main.Lutilisation des accessoires qui ne satisfont pas ces exigences peut ne pas tre conforme aux exigences du FCC relatives lexposition la RF.Et devrait tre vit. Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 0mm must be maintained between the users body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. Cet appareil a t test pour un fonctionnement typique du corps sous pression, pour satisfaire aux exigences relatives lexposition RF, une distance minimale de sparation de 0mm doit tre maintenue entre le corps de lutilisateur et la poigne.Y compris les antennes, les bandes de frquences et les satellites,Des accessoires similaires utiliss par cet appareil ne doivent pas contenir de composants mtalliquesSeule la fourniture ou une antenne agre.

ceeerrent LE a a a) OMEN ee WEN OT TH COT e ana eC Cae CS ae CR aA bh! COR a a BO a a Ua a a CU aa Ca}

7 A Product Name : Rugged Tablet PC Model No : M700DQ8 Rating: +5V=-3A Manufactured Date :

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numrique de la classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. FCC ID:PX9M700DQ8002 IC:9911A-M700DQ8002 C FE Winmate Inc. 9F, No.111-6, Shing-De Rd., San-Chung Dist., New Taipei City 24158, Taiwan Part number of this label 91D00000332H MADEIN TAIWAN

Winmate Inc. Agent Authorization Company: Winmate Inc. Address: 9F, No.111-6, Shing-De Rd., San-Chung Dist., New Taipei City, 24158, Taiwan, R.O.C Product Name: Rugged Tablet PC Model Number(s): M700DQ8, M700XXXXXXXXXXX(Where X can be A-Z,a-

z ,0-9,-, Blank or Slash) Product Description: Rugged Tablet PC FCC ID: PX9M700DQ8002 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Date: 2020-06-01 Signature:

Name:

Chini Liao Title:

R&D Manager Company: Winmate Inc.

Differences Description We Winmate Inc. state:

Product Rugged Tablet PC Model Name M700DQ8, M700XXXXXXXXXXX(Where X can be A-Z,a-z ,0-9,-, Blank or Slash) Trade Name: Winmate FCC ID: PX9M700DQ8002 The electrical circuit design, layout, components used and internal wiring for above models are identical, nly difference for marketing purpose Signatory Date 2020-06-01 Signature Name: Chini Liao Title: R&D Manager Company: Winmate Inc. Address: 9F, No.111-6, Shing-De Rd., San-Chung Dist., New Taipei City, 24158, Taiwan, R.O.C

Winmate Inc. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2020-06-01 Subject; Request for Confidentiality FCC ID: PX9M700DQ8002 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Tune-up Procedure SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES Part List In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Winmate Inc. Title: R&D Manager

Winmate Inc. FCC Software Configuration Control Declaration Date: 2020-06-01 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: Winmate Inc. Product Name: Rugged Tablet PC Model Number(s): M700DQ8, M700XXXXXXXXXXX(Where X can be A-Z,a-z ,0-9,-, Blank or Slash) FCC ID: PX9M700DQ8002 Regarding FCC Country Code Selection guidelines identified in KDB 594280. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name:

Title:

Signatureof applicant Date: 2020-06-01 R&D Manager Chini Liao FCC Software Configuration Control Declaration Rev1.1