|
app
s
|
Applicant Information
|
|
|
1 2 3 4 5
|
Effective |
2021-07-15
|
|
1 2 3 4 5
|
2020-01-30
|
|
1 2 3 4 5
|
Applicant's complete, legal business name |
Winnow Solutions Limited
|
|
1 2 3 4 5
|
FCC Registration Number (FRN) |
0028809713
|
|
1 2 3 4 5
|
Physical Address |
Pitfield House 41 Pitfield Street
|
|
1 2 3 4 5
|
Pitfield House
|
|
1 2 3 4 5
|
London, N/A
|
|
1 2 3 4 5
|
United Kingdom
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4 5
|
TCB Application Email Address |
c******@ul.com
|
|
1 2 3 4 5
|
k******@hypervsn.com
|
|
1 2 3 4 5
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4 5
|
Grantee Code |
2AUM4
|
|
1 2 3 4 5
|
Equipment Product Code |
WV03
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4 5
|
Name |
K****** D****
|
|
1 2 3 4 5
|
Telephone Number |
+44(0********
|
|
1 2 3 4 5
|
Fax Number |
+44(0********
|
|
1 2 3 4 5
|
E-mail |
k******@winnowsolutions.com
|
|
|
app
s
|
Technical Contact
|
|
1 2 3 4 5
|
Firm Name |
Winnow Solutions Ltd
|
|
1 2 3 4 5
|
Winnow Solutions Limited
|
|
1 2 3 4 5
|
Name |
M******** H******
|
|
1 2 3 4 5
|
Physical Address |
Pitfield House
|
|
1 2 3 4 5
|
London, N1 6DA
|
|
1 2 3 4 5
|
United Kingdom
|
|
1 2 3 4 5
|
Telephone Number |
07545********
|
|
1 2 3 4 5
|
+44(0********
|
|
1 2 3 4 5
|
44 75********
|
|
1 2 3 4 5
|
E-mail |
m******@winnowsolutions.com
|
|
|
app
s
|
Non Technical Contact
|
|
1 2 3 4 5
|
Firm Name |
Winnow Solutions Ltd
|
|
1 2 3 4 5
|
Winnow Solutions Limited
|
|
1 2 3 4 5
|
Name |
P******** F****
|
|
1 2 3 4 5
|
N****** M****
|
|
1 2 3 4 5
|
N****** N******
|
|
1 2 3 4 5
|
Physical Address |
Pitfield House
|
|
1 2 3 4 5
|
London, N1 6DA
|
|
1 2 3 4 5
|
London, SE1 6DA
|
|
1 2 3 4 5
|
United Kingdom
|
|
1 2 3 4 5
|
Telephone Number |
+4478********
|
|
1 2 3 4 5
|
+44(0********
|
|
1 2 3 4 5
|
44 77********
|
|
1 2 3 4 5
|
E-mail |
p******@winnowsolutions.com
|
|
1 2 3 4 5
|
n******@winnowsolutions.com
|
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 5 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 | No |
| 1 2 3 4 5 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 5 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 5 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 4 5 | DTS - Digital Transmission System |
| 1 2 3 4 5 | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 4 5 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Winnow Vision 3.0 |
| 1 2 3 4 5 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 4 5 | Modular Equipment Type | Single Modular Approval |
| 1 2 3 4 5 | Purpose / Application is for | Class II Permissive Change |
| 1 2 3 4 5 | Change in Identification |
| 1 2 3 4 5 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 4 5 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 5 | Grant Comments | Output power listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20, 40, and 80 MHz bandwidths. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
Class II Permissive Change for change in antenna as detailed in this filing.. |
| 1 2 3 4 5 | Power output listed is the maximum conducted. Device operates with specific antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device supports 20 MHz bandwidth. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations
Class II Permissive Change for change in antenna as detailed in this filing. |
| 1 2 3 4 5 | Output power listed is the maximum conducted. Device operates with specific
antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device
supports 20, 40, and 80 MHz bandwidths. This transmitter is approved for use in
mobile RF exposure category configurations with the antenna(s) installed to
provide a separation distance of at least 20 cm from all persons. The antenna(s)
used for this transmitter must not be collocated or operating in conjunction with
any other antenna or transmitter within a host device, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and
operating instructions for complying with FCC multi-transmitter product
procedures. Grantee must coordinate with OEM integrators to determine
applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission. |
| 1 2 3 4 5 | Power output listed is the maximum conducted. Device operates with specific
antennas in 1TX SISO and 2TX MIMO modes described in this filing. This device
supports 20 MHz bandwidth. This transmitter is approved for use in mobile RF
exposure category configurations with the antenna(s) installed to provide a
separation distance of at least 20 cm from all persons. The antenna(s) used for
this transmitter must not be collocated or operating in conjunction with any other
antenna or transmitter within a host device, except in accordance with FCC multi-transmitter
product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Grantee
must coordinate with OEM integrators to determine applicable host configurations
to ensure RF exposure compliance, including simultaneous transmission |
| 1 2 3 4 5 | Power output listed is conducted. This transmitter is approved for use in mobile
RF exposure category configurations with the antenna(s) installed to provide a
separation distance of at least 20 cm from all persons. The antenna(s) used for
this transmitter must not be collocated or operating in conjunction with any other
antenna or transmitter within a host device, except in accordance with FCC multi-transmitter
product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Grantee
must coordinate with OEM integrators to determine applicable host configurations
to ensure RF exposure compliance, including simultaneous transmission |
| 1 2 3 4 5 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 5 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4 5
|
Firm Name |
UL International (UK) Ltd
|
|
1 2 3 4 5
|
UL Verification Services Inc. (formerly UL CCS)
|
|
1 2 3 4 5
|
Name |
S****** D****
|
|
1 2 3 4 5
|
M**** M****
|
|
1 2 3 4 5
|
Telephone Number |
44 12********
|
|
1 2 3 4 5
|
919 5********
|
|
1 2 3 4 5
|
Fax Number |
44 12********
|
|
1 2 3 4 5
|
000-0********
|
|
1 2 3 4 5
|
E-mail |
S******@ul.com
|
|
1 2 3 4 5
|
m******@ul.com
|
|