Specification LM030008 LED LINKABLE SHOPLIGHT Specification V1.0 File name Product specification Version Editor Finished date File status
] Draft
[
[ ] Published
[
] Pending Version Editor Participator Valid from Remark V1.0 Henry Ho 2019-10-14 Niou 0 Amendment 1 Feature LM030008 microwave module, which applies CS-CRD02-XX1 HD021VCR Specification colasmart self-R&D microwave chip, can CS3921 effectively sense human and entity motion Light sensor is available when correspondent component is extra-connected IR remote is available when correspondent component is extra-connected ,and microwave motion sensor distance,hold time,lux threshold etc can be adjusted by IR remote Plate-antenna applied for the sake of max long-distance detection purpose RGB background mode available Working temperature be -20 deg C to +70 deg C
-20 60 HD021VCR 2 Application Lighting Security Smart home 3 Specication Working voltage Working current Stand-by power Working temperature Frequency Range Microwave power Detection range Mounting height Sense distance Hold time 7.5-12VDC
<30mA
<0.5W
-20 deg C to +70 deg C 5753-5853MHz
<0.3W Max.14m(ceiling mounted) Max.4.5m(ceiling mounted) Very near/Near/Medium/Far OFF/30s/10min/30min 4 Drawing Specification Red : VCC Black :GND White :PWM IR Receiver 32.5mm 32.5mm Mechanical structure(mm) Brightness level Level 1st level 2nd level 3th level 4th level 5th level 6th level 7th level 8th level Pwm %
10%
20%
30%
Level 9th level 10th level Min 40%
Max Pwm %
90%
100%
10%
100%
50%
60%
70%
80%
Specification 5.6 Hold time Hold time level Time to dim to stand-by brightness from current brightness(half of current brightness) 1min 30s 5min 4min 10min 9min 30min 29min Time to dim to OFF from 30s 1min 1min 1min stand-by brightness(half of current brightness) 5.7 Sense distance Distance Very near Near Medium 1 - 2 2 - 3.5 3.5 - 5 level Distance range 6 Remark Far 5 - 7 Sense range will be different according to different install height and sense angle Application environment, entity motion velocity etc will effect module sense range ,so above sense range is only for your reference based on ideal circumstance Actual lux threshold is related to your light case material, our value is this specification is only for reference Specification FCC Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS OR CHANGE TO THIS EQUIPMENT. SUCH MODIFICATIONS OR CHANGE COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Increase the separation between the equipment and receiver.
-- Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. To satisfy FCC exterior labeling requirements, the following text must be placed on the exterior of the end product Contains Transmitter module FCC ID: WUI-LM030008 The modular must be installed in the host that assign by Company name: Winplus Co., Ltd. Product/PMN: LED Shop Light (Linkable) with Motion Sensor Remote Model no./HVIN: LM030008-84 if other host types used would need further evaluation and possible C2PC if they are not significantly similar to the one tested. IC Information
-English:
1. This device complies with Industry Canada RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with ISED RF radiation exposure limits set forth for an uncontrolled environment.
-French:
Leprsent appareil est conforme aux CNR d'Industrie Canada applicable aux appareils radio Exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement."
Cet appareil est conforme aux limitesd'exposition de rayonnement RF ISEDC tabliespour un environnement non contrl. Pour satisfaire la ISED extrieur tiquetage, le texte suivant doit tre placlextrieur du produit final Contains metteur module IC:7297A-LM030008. The modular must be installed in the host that assign by Le modulaire doit tre install dans l'hte assign par Nom de la compagnie: Winplus Co., Ltd. Produit/PMN: LED Shop Light (Linkable) with Motion Sensor Remote Modle no./HVIN: LM030008-84 if other host types used would need further evaluation and possible C2PC if they are not significantly similar to the one tested. si d'autres types d'htes utiliss ncessiteraient une valuation plus pousse et un C2PC possible s'ils ne sont pas significativement similaires celui test