FCC ID: 2AB75-BM-130 Bluetooth Mouse

1 1. Receiver, Type Ccharging port the Bluetooth pairing ID. Introduction:

Thank you for choosing this Verbatim product. Please read this manual carefully prior to use so as to fully understand the product and its correct usage. Caution:

- DO NOT alter, modify or disassemble the device. There are no user-serviceable parts inside, and incorrect reassembly may result in shock or re hazard.

- DO NOT drop or subject the device to strong mechanical shock. DO NOT expose to moisture, water, rain, snow, spray, heat or sources of ignition.

- Use a damp soft cloth to clean the surface of the device. DO NOT use chemical solvents.

- Contact our customer support team if you have troubleshooting issues with

- DO NOT operate the device if it has been dropped or otherwise damaged in this product. any way. Package Contents:

1 x Wireless optical mouse 1 x Nano receiver 1 x Type C cable 1 x User manual Specications:

- Product name: 2.4GHz Bluetooth 5.0 Wireless Mouse

- Product model: VAPMI055

- Materials: ABS

- Color: Black / White

- Dimensions: 59.5 x 27 x 110.3(mm) (LxWxH)

- Weight: 78g

- Input: 5Vdc/150mA

- Operating Temperature: 0c - 40c

- Storage temperature: -15c - 50c inside 2. Battery Indicator 3. On/Off Button 4. Wireless Indicator 5. Setup Button 2 3 4 5 P O n o

M A D E I N C H N A I V e r b a t i m

6 6 5 2 2 R a t i n g

3

. 7 V d c

1 0 m A M o d e l n o

V A P M I 0 5 5 I n p u t

5 V d c

1 5 0 m A B a t t e r y c a p a c i t y

3 0 0 m A h W l i r e e s s 2

. 4 G a n d B u e t o o t h D u a l l M o d e M o u s e Product Features:

Resolution: 1200, 1600, 2400 dpi Battery capacity: Li-polymer 300 mAh RF 2.4 GHz / Bluetooth 5.0 Easy installation and setup Turn in sleep mode after inactive for 56 seconds for power saving Operating systems: Windows XP, 7, 8, 10 and MAC OS First Time Using:

1, Turn on the mouse. The "Wireless Indicator" blink in green once. 2, The "Wireless Indicator" turned to blue and blink slowly. The mouse is in 3, Switching between Bluetooth and 2.4GHz mode, press the "Setup Button"

Bluetooth mode. once. Connecting with Bluetooth:

1, While the "Wireless Indicator" is blinking slowly, the mouse is broadcasting 2, Look for the pairing ID "VBMouse055" from the Bluetooth setup of your device and choose it to connect to the mouse. 3, The "Wireless Indicator" will shine in blue color for 3 seconds and off which means it connected successfully. The mouse can be used after connected sucessfully. Connecting with 2.4GHz:

1, While the "Wireless Indicator" is blinking in green color slowly, the mouse is under 2.4GHz mode and searching for the receiver. 2, Take out the receiver from the mouse and plug to the USB port of the device. The "Wireless Indicator" shine in green for three seconds and off. 3, The device will setup the mouse automatically. The mouse can be used after the setup completed. Remarks:

1, The mouse will memorize the mode it was the last time it turned off. It will automatically turned on to the same mode as last time used. 2, User can simply switch between the two mode by pressing the "Setup Button" once. 3, Switching from 2.4GHz to Bluetooth, the "Wireless Indicator" will blink in blue color twice and connect to the previous connected device immediately. 4, Switching from Bluetooth to 2.4GHz, the "Wireless Indicator" will blink in green once and connect to the receiver immediately. EN EN EN Verbatim Australia Pty Ltd (ABN 39 005 706 374) Warranty Statement Our goods come with guarantees that cannot be exclude under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Verbatim Australia Pty Ltd (ABN 39 005 706 374) (Verbatim) provides the following warranty in relation to its goods (Product). The benets of this warranty are in addition to any rights and remedies imposed by Australian State & Federal legislation that cannot be excluded. Nothing in this warranty is to be interpreted as excluding, restricting or modifying any State or Federal legislation applicable to the supply of goods and services which cannot be excluded, restricted or modied. Verbatim warrants that, subject to the exclusions and limitations below, the Product will be free from defects in materials and workmanship for the period specied on the product packaging and/or the website from date of purchase. If a defect appears in the Product before the end of the warranty period and Verbatim nds the Product to be defective in materials and workmanship, Verbatim will at its own discretion repair or replace the Product free of charge. If goods presented for repair are capable of retaining user-generated data, repair of these goods may result in loss of the data. Proof of Purchase Proof of purchase shall be required to be eligible for this warranty and to establish the commencement date of this warranty. This warranty is valid for the original purchase only and is not transferrable to a subsequent customer if the Product is sold by the original customer during the warranty period. The term of your warranty period shall commence from the purchase date appearing on your purchase receipt from an authorised distributor, reseller or retailer and extends only for the time set forth in the Product documentation. This information can be obtained from the packaging and/or the Verbatim Australia website. Returned Merchandise Authorisation No product may be returned to Verbatim Australia without rst contacting us for a RMA (Returned Merchandise Authorisation) number. If it is determined that a Product may be defective, you will be given an authorisation number and instructions for Product return. An unauthorised return, i.e. one for which an RMA number has not been issued, will be returned to you at your expense. Authorised returns are to be shipped prepaid and insured to our Head Ofce in qualied packaging. Notice to Customer Relating to Repair of Goods Verbatim Australia will not accept goods for repair unless we have provided the consumer with a Notice to Customer Relating to Repair of Goods that complies with regulations. As the notice relates to the repair of Goods that store user-generated data, the repairers Notice states that the repair of Goods may result in loss of data. Since it is also our practice to supply refurbished Goods as an alternative to repairing a consumers defective Goods, our notice species that the Goods presented for repair may be replaced by refurbished Goods of the same type rather than being repaired. The Repairers Notice will be issued at the same time that we issue an RMA number. This statement is also available on the Verbatim Australia website. Warranty Claims 1) If a fault covered by warranty occurs, the customer must rst:

2) Any warranty claim must be accompanied by:

3) If Verbatim or the retailer from which the Product was purchased nds no defect in the Product after inspection and testing, the customer must pay Verbatims usual costs of service work and testing. 4) The customer must bear the cost of the transport to Verbatim or to and from the retailer to make the warranty claim including all insurance of the Product. Verbatim will bear the cost of the return transport to the customer once the claim has been nalised. Exclusions The warranty will not apply where:

1) The Product has been repaired, altered or modied by someone other than a) Contact Verbatim Australia Head Ofce using the contact b) Return the Product to the retailer from which the Product was purchased. a) Proof of purchase; and b)Full details of the alleged defect. Verbatim or an authorised repair agent;

details provided below; or designed;

inspection;

environment, temperature, water, re, humidity, pressure, stress or similar;

use and maintain the Product in accordance with Verbatims instructions, recommendations and specications (including applicable maintenance schedules);

2) The alleged defect in the Product is within acceptable industry variances;

3) Verbatim cannot establish any fault in the Product after testing and 4) The Product has been used other than for the purpose for which it was 5) The defect in the Product has arisen due to the customers failure to properly 6) The Product has been subject to abnormal conditions or use, including 7) The defect has arisen due to abuse, misuse, neglect or accident. The warranty does not extend to:

1) Damage or defects caused by normal wear and tear;

2) General, consequential, punitive, incidental or special damages. These 3) Incompatibility or poor performance due to specic computer or hardware Limitations Verbatim makes no express warranties or representations other than set out in this warranty. The replacement of the Product or part of the Product is the absolute limit of Verbatims liability under this express warranty. Contact Details Verbatim Australia Pty Ltd Unit 6, 450 Princes Highway, Noble Park, Victoria 3174, Australia Tel: +61 3 9790 8999 Fax:+61 3 9790 8955 Email: support@verbatim.com.au Website: www.verbatim.com.au include loss of recorded data, interruption of use, the cost of recovery of lost data, lost prots and the cost of the installation or removal of any Products, the installation of replacement Products, and any inspection, testing or redesign caused by any defect or by the repair or replacement of Products arising from a defect in any Product. used. EN EN EN EN Product Description:

Mouse Wireless 2.4G and Bluetooth Dual Mode Rechargeable Part Number:

66522 Date:

2020-05-27 Finishing:

Color:

1C+1C Material:

80gsm Wood Free Paper Folded Size:

280L x 200H(mm) Die-line K Prepared By:

Rodney Remarks:

Front Side Users Manual / /

Model: VAPMI055 Others:

Changing resolution - user can change the resolution by pressing the left and right click button at the same time for 10 seconds. Please note there is no indication of changing resolution. Reset the mouse - Press the "Setup Button" for 10 seconds (the mouse will be reset from all previous Bluetooth connections). Q&A:

Q: The mouse doesn't connect to my device with Bluetooth which had been connected before. A: Check the device's Bluetooth is on. If the mouse has been removed from the device, press the "Setup Button" for 3 seconds, the "Wireless Indicator" will blink quickly and broadcast the pairing ID. Connect the mouse again from the device. Q: The mouse didn't charge when connected to the charger. A: Please make sure the charger is on and does provide power output to charge the Q: The mouse doesn't move as smooth as it works before. A: This may be an indication of the battery level is getting low. Recharge the mouse mouse. and try again.

(Korea only) 1 Year Limited Warranty for further details visit www.verbatim.com/warranty FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:

- Reorient the receiving antenna.

- Connect the equipment into and outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Increase the separation between the equipment and receiver.

Autorisation 2020/7/16 Equipment Federal 7 435 Oakland Columbia, MD 2046 Communications Division Mills Road Commission FCC ID: 2AB75-BM-130 Product Name: Bluetooth Mouse Reauest for Confidentialitv Pursuant the following to Sections documents be held confidential:

0.457 and 0.459 of the commissions rules, we hereby request that for which you are seeking confidentiality-

for example

(List here the documents Schematics Block diagram Opeation description These materials customarily harmful released to the company contain trade secrets and proprietary to the public. and provide The public uustified disclosu benefits information and aenot might be eof this information to our competitors. Name Title Company Shenzhen Wintop Electronics Co.,Ltd

Product NameBluetooth Mouse Model No.BM-130 BM-786,BM-106,BM-786C,BM-782, BM-660,BM-700,BM-698,BM-693, BM-697,BM-105,BM-127,BM-783, BM-695S FCC ID2AB75-BM-130 All models are electrically identicalonly model no is differenct.