FCC ID: 2AGEG-AP81 Asset Tracker

SigFox Asset Tracker User Manual The SigFox Asset Tracker provides the capability to track indoor assets leveraging PwCs Indoor Geolocation Platform (IGP). The tracker supports time-based, near real-time and last known location tracking modes

(4) USB Charging port

(6) Device Label

(5) Velcro Loop

(1) LED

(2) Button

(3) Reset pin

(1) LED Activation: Alternate between red, green and blue. Device is activated. Charging:

Solid red while charging. Device is being charged. Solid green while charging. Device is fully charged. Device battery check:

Solid green after button press. Device battery level is higher than 25%

Solid red after button press. Device battery level is lower than 25%

Whitelist / configuration update Solid blue. Device is connected to the PC console via USB Flash blue. Whitelist / configuration is being updated

(2) Button Device activation (first time use of the device only):

Press the button and hold for 1 second Device battery check:

Single press Device Specs:

Model: AP81 Radio Frequency Band: SigFox RC2

(902.1375MHz to 904.6625MHz) WiFi Band: 2.4GHz, Bluetooth Version: 4.2 Dimensions: 2.2 x 2.2 x 0.8 inch Battery: 1,000mAh Operating Temperature: 0-45C Relative Humidity: 0-95%

1

(7) Optional Clip Mounting Bracket

(8) Optional Screw Mounting Bracket

(9) Optional Magnetic Mounting Bracket

(10) USB Charging Cable

(8) Optional Screw Mounting Bracket Screw mounting bracket for the asset tracker

(9) Optional Magnetic Mounting Bracket Magnetic mounting bracket for the asset tracker

(10) USB Charging Cable Charging cable for the device

(3) Reset Pin Reset the device by pressing the pin.

(4) Charging Port Micro-USB charging port. Use the included cable to charge the device.

(5) Velcro Loop Option to mount the asset tracker with a velcro strap across the loop

(6) Device Label Network ID: SigFox Device ID Address: Device MAC address Serial No. Device serial number Part No. Device part number FCC ID: Device FCC ID QR Code: Scanning of the QR code renders a concatenated Network ID, Address, Serial No. and Part No.

(7) Optional Clip Mounting Bracket Clip mounting bracket for the asset tracker Device Operating Modes:

Time-based Tracking Mode: configurable intervals of 10 min, 15 min, 30 min, 1 hour, 12 hours, 24 hours Near Real-time Tracking Mode: location report every minute when device is moving Last Known Location Tracking Mode: location report upon a devices initial movement and stopping with a cool down period of 1, 5 or 10 min (configurable) Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCCs RF radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Installers must ensure that 20cm separation distance will be maintained between the device (excluding its handset) and users.

Network ID:01253525 Address:98:F4:AB:62:01:38 Serial No: A208NPI-ES-010038 Part No:AP81-ATSigfox-01R-ES FCC ID: 2AGEG-AP81

= vKc safe | VROHS | -C This device complies with part 15 of FCC Rules. Operation Is subject to the following two conditions (1) This device may not cause hamful Interference. and (2) this device must accept any Interference received. including Interference that may cause undesired operation

a) b) c) d) e) f) g) SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Wise Ally Holdings Limited Unit 3203-3207 , Tower 1 , Enterprise Square Five , 38 Wang Chiu Road , Kowloon Bay,Hong Kong Address Grantee Code FCC ID Contact Email Contact Phone Authorized Contact Name Mike Lai 2AGEG 2AGEG-AP81 hclai@wiseally.com.hk 852 22816472 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature:

Date:20210108 Print Name:

Title:

Mike Lai Assistant Quality and Reliability Manager

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0

Confidentiality Request regarding application for FCC ID 2AGEG-AP81 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Date : 2021/01/08 To:

From: Wise Ally Holdings Limited Unit 3203-3207 , Tower 1 , Enterprise Square Five , 38 Wang Chiu Road , Kowloon Bay, Hong Kong Regarding:

LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Mike Lai Assistant Quality and Reliability Manager Wise Ally Holdings Limited

TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Date: 20210108 Regarding: 2AGEG-AP81 To whom it may concern:

We, the undersigned, hereby authorize SGS Hong Kong Limited and YW Yung in SGS Hong Kong Limited to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Wise Ally Holdings Limited This authorization is valid until further written notice from the applicant. Name (Printed): Mike Lai Title: Assistant Quality and Reliability Manger Signature:

On behalf of Company: Wise Ally Holdings Limited Telephone: 852 22816472