GETTING STARTED Charge your Headset WB130 Overview Make sure your headset is fully charged before first used. Connect a travel charger to the charging socket. The LED indicator shows the charging level as follows :
Call Button
(+)Key: Volume Up
(-)Key: Volume Down Indicator Light
(3 color LED) Microphone Charging Socket(Mini-USB) Speaker
Red : Charging less than 70%
Blue : Charging between 70% and Full
Green: Fully charged Charge in Two ways :
1. Plug the travel charger into wall socket 2. Plug the brave charger using USB port in your computer
(Make sure the computer is on when using USB port.) The LED indicator will turn red when the adaptor is correctly engaged and the battery is stated charging. When charging is completed, the LED will turn from red to green. Note: It takes 2 hours to fully charge the Bluetooth 4 5 Turn On and Off Pair it with your phone To Turn On Press and hold the talk button for 3 seconds. The LED indicator will then flash blue.
To Turn Off Press and hold the talk button for 5 seconds. The LED indicator will flash red and then go off.
After turning on the Bluetooth, you should pair it with your phone in order to use it. There are 2 ways pairing :
1. Quick paring After you turn the Bluetooth on in first-use, it enters the pairing mode automatically. 1) Press and hold the talk button until LED indicator flashes Red and Blue alternately. 2) Place the Bluetooth to your mobile phone within one meter. 3) Activate your mobile phones Bluetooth function. And Set the mobile phone to search for all available Bluetooth devices. 4) After completing to search, select the WB130 from the list of devices shown. 5) Enter the pin code 0000 and press OK to the Bluetooth with your mobile phone. 6) If the pairing is completed successfully, the LED flashes 3 times continuously. 7) Go back to your mobile phones main menu. The Bluetooth icon will be displayed on the screen once it is activated. Now, you are able to make and receive calls using the Bluetooth. NOTE: If you want to connect another mobile with the same Bluetooth, you should completely disconnect the Bluetooth with the previous mobile and then start to pair with new mobile. 6 7 Pair it with your phone To wear the Headset 2. Easy paring (WB Technology) 1. Without Earloop Once the initial pairing mode is completed, the Bluetooth enters the pairing mode automatically by folding down the earpiece of the Bluetooth. 1) Fold down the earpiece of the Bluetooth, then, the LED will flashes Red and Blue alternately. 2) Follow the same procedure from 3) to 7) of Quick pairing mode mentioned above. 1) Fold down the earpiece of the Bluetooth. 2) Put the earbud snugly inside your ear and then place the microphone of the headset toward your mouth. 2. With Earloop 1) Combine the Bluetooth with earloop. 2) Fit the earloop behind your ear and then place the microphone of the headset toward your mouth.
8 9 Using your Headset 1. Locking When the earpiece is in a straight position, its in locking mode. The talk button is locked so that it can prevent an unwished dialing by mistake. 2. Answering a Call 1) Fold down the earpiece when its folded up. 2) Or, press the Talk Button when its folded down. At this time you will hear the beep through your earpiece. NOTE: LED will flash green and blue continuously when there is an incoming call. 3. Ending a Call 1) Fold up the earpiece to end your call. 2) Or, press the talk button when it is folded down. At this time, you will hear the beep through the earpiece. 4. Making a Call 1) The Bluetooth remember the last call. So, if you want to make previous call, press the Talk button of the Bluetooth. 2) To make another call, you should follow the phones normal procedure on your mobile phone. 5. Voice dialing If your mobile phone is equipped with a standard voice dialing function, 1) Press the Talk Button about 1.5seconds. 2) When you hear a beep, and you speak the name of the person who you want to call (Depend on the phone). 6. Rejecting a Call If you do not want to answer an incoming call, press the Talk Button for 3 seconds. 7. Last number redialing You may be able to redial your previous place call by pressing the Talk Button when the earpiece is fold down.
10 11 Using your Headset 8. Mute
Mute on : Press and hold the Volume Up(+) Button for 3 seconds. LED flashes Green every 10 seconds for 1 minute.
Mute Off: Press and hold the Volume Up(+) Button for 3 seconds in the mode of Mute on. 9. Transferring a Call 12. A2DP Technology The Headset is capable of streaming music over Bluetooth either from a mobile phone or any other Bluetooth device supporting A2DP. While listening to music if you receive a call, the music will be suspended automatically. Then when you end a call, the music will restart automatically from the suspended point. While A2DP streaming music playing, LED will flashes Green every 3 seconds for 30 seconds. While on a call, press and hold the Talk Button for 3 seconds. 13. Adjusting the Volume 10. Transferring a 3 way call While in a call, press and hold the Talk Button for 3 seconds to reverse an incoming call. At this time, the previous call should be standby mode and you can receive the incoming call. 11. Auto Reconnection with Bluetooth and Mobile Phone Your Bluetooth headset and your mobile phones disconnection is within 3minutes, the will automatically reconnect when they are turned back on, when they become with in communication range. Automatic reconnection is limited to 3 minutes. If it doesnt reconnect automatically, please tap the Talk Button to reconnect. Accordingly depending on your sound environment, you can adjust the volume of the Bluetooth. 1) Press the Volume Up(+) or Down(-) Button of the Bluetooth to control the volume. 2) Or, you can increase or decrease the volume with the volume keys of your mobile phone. Note: The Bluetooth contains the Self-tune technology and noise reduction technology. therefore, you can hear more clear sound with its technology. you should be give on the self-tune test in the first use to hear the optimal personalized sound.
12 13 14. Self-Tune Test (WB Technology) 16. NoiZfree The Purpose of the Self-Tune test is to conduct quick and precise hearing test, and let the WB120s equalizer will self adjust the sound frequency and volume level for optimized sound quality to your comfort. The test will be conducted at the initial use, and any time after necessary. 1) Wear the Bluetooth Headset in your year. 2) Press and hold the Volume Down(-) 5 seconds until you hear beep sounds 3 times. 3) And then you will hear the Getting Started message. 4) Follow the direction from your headset and tap the Talk Button whenever you hear the pure tone sound until you can hear the voice message End of the Test. Testing requires maximum 60 seconds. 15. Self-Tune Test / Reset You may repeat the Self-Tune test at any time repeating procedures mentioned above. If there is an incoming call during testing, you may answer a call by pressing the Talk Button, and star over re-testing after you end your call. With using the directional microphones and power signal processing algorithms, it can allow to remove ambient noise from your outgoing speech signal and transfer clear sound in any environment. 17. Multi-Connection (Mobile to Other Devices) The Bluetooth is compatible with connecting other two Bluetooth devices at the same time.
(Mobile Phone to MP3/ PDA/ Laptop, etc. )
* It does not support the same profile devices at the same time ( i.e. HFP/ HFP, A2DP/ A2DP ) 18. Battery Indication You may check on the current battery status by pressing the Talk Button for 3 seconds. According to the status of battery each LED flashed 3 times for twice at 0.5 seconds intervals. Green : Available for 1 - 5 hours talk Blue : Available for 20 min - 1 hour talk Red : Available under 20 minutes. 14 15 Using Accessory Trouble Shooting 1. Cradle
2. Hand strap
3. Car Holder
4. Earloop pack
If you are unable to connect your Bluetooth and mobile phone, please try as follows :
16 17 LED Color Indicating LED Color Blue Red Red/ Blue Blue Blue Blue Green/ Blue Blue Green Green Blue Red Red Green Blue Red Red/ Blue/ Green Green Green
Series of Flashes Meaning Flashes 4 times. Power On Flashes 3 times Power Off Flash alternately until pairing success (last for 5 minutes) In pairing mode Flashes 3 times continuously Pairing success Flashes every 5 seconds Connected with phone
(For 1 minute then off) and stand-by mode Flashes 2 times every 5 seconds Disconnected with phone
(For 1 minute then off) and stand-by mode Flashes alternately continuously Incoming a call During a call Flashes every 10 seconds for 1 minute Mute on Flashes 2 times rapidly every 0.5 seconds Battery : 1~5 hours talk time Flashes 2 times rapidly every 0.5 seconds Battery : 20 min.~1 hour talk time Flashes 2 times rapidly every 0.5 seconds Battery : under 20 min. talk time Flashes 2 times every 30 seconds continuously Low battery warning On Fully charged Charging level 70% ~ full On Charging level less than 70%
During Self Tune test Flashes alternately Activating Noise Reduction mode On for 10 seconds A2DP streaming music playing Flashes every 3 seconds for 30 seconds Flashes every 10 seconds for 1 minute On 20 21