DBUB-P705 Bluetooth Adapter Users Manual This document provides safety instructions and describes the specifications. Read this document carefully before installing to ensure your safety and product performance. Federal Communication Commission (FCC) Interference Statement This device complies with Part 15B and 15C of FCC Rules and RSS-210 of IC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of this device. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Radiation Exposure Statement:
Radiation Exposure Statement:
Radiation Exposure Statement:
Radiation Exposure Statement:
The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Industry Canada statement:
Industry Canada statement:
Industry Canada statement:
Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Radiation Exposure Statement:
Radiation Exposure Statement:
Radiation Exposure Statement:
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration d''''exposition aux radiations:
Dclaration d exposition aux radiations:
Dclaration d Dclaration d exposition aux radiations:
exposition aux radiations:
Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Taiwan Taiwan statement statement::::
statement Taiwan Taiwan statement Caution:
Be aware of the following limits before using the Bluetooth Adaptor.
Do not subject the Bluetooth Adaptor to high temperatures, direct sunlight or moisture.
Do not bend, or subject the Bluetooth Adaptor to strong impacts.
Do not disassemble or alter the Bluetooth Adaptor in any way.
Do not attempt to install the Bluetooth Adaptor in any incompatible device.
Do not remove the Bluetooth Adaptor from the TVs during operations.
Data transmitted and received over radio waves may be intercepted and monitored.
To avoid malfunctions caused by radio wave interface, keep the TV away from the devices such as other wireless devices, microwaves and the devices that use 2.4 GHz signals when using the Bluetooth Adaptor.
Depending on the area, this Bluetooth Adaptor may not be available. Setup the Bluetooth connection The Bluetooth adapter is pre-installed in the TV set. No extra installation steps are required for users. Follow the steps below to start using the feature of this adapter:
1. Turn on your TV. 2. Switch to the channel that delivers 3D contents. If you are watching a disc with 3D contents, you will also need to activate your player for playing the disc. 3. Turn on your 3D glasses. 4. The 3D glasses will pair with this Bluetooth adapter automatically and are now ready for use. Specification Specifications Specifications Specifications Specifications Power supply DC 3.3V , 105mA Antenna Tx 1, Rx 1 Host Interface USB 2.0 + GPIO x1 Standard Compliance Bluetooth 3.0 Frequency Range 2.4 GHz (2.40GHz-2.4835GHz) Modulation GFSK Pi/4 QPSK 8DPSK Receiver Sensitivity
-88 dBm(typ.) GFSK, 0.1%BER
-85 dBm(typ.) for pi/4-DQPSK, 0.01%BER Transfer rate (standard)
3.0Mbps(MAX, Theoretical Value) Output Power Class 1, 8dBm typical Security BT E0/AES/SAFER+
* Transfer rate are theoretical values; however, actual communication rate will vary according to communication environment or connected equipment.