FCC ID: NKR-LVSK-R2A Consumer Home Router with WiFi

Verizon Router User Guide Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/ TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. FCC regulations restrict the operation of this device to indoor use only. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Important Notice The user is responsible for determining whether surfaces and installation environments are appropriate. Please remember that many factors influence installation safety. Please follow the user manual. Materials, flatness, cleanliness of surfaces, humidity, wind speed, time and many other factors can affect the adhesiveness and fixedness of this product. Verizon does not guarantee the product can be fixed and will not fall. Given the variety of factors that can affect the adhesion and fixedness, it is essential that the user evaluates the conditions of surfaces and the environment to determine whether they are suitable for installation. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, VERIZON MAKES NO OTHER WARRANTIES, EITHER EXPRESS, IMPLIED OR STATUTORY. VERIZON DISCLAIMS ANY LIABILITY CAUSED BY ANY USERS NON-COMPLIANCE WITH THE USER MANUAL. DISCLAIMER Safety Warnings Adapter identified in the list below. Caution connection. Do not use any other power adaptor except for the one that accompanies this unit or a power adaptor Use of another adapter could result in damage to the unit. The following power adaptor is qualified for use with this Verizon Router:

This unit must be powered by LUCENT TRANS, model 1A98-1250 ; 12V, 5A, 60W Ensure to connect the power cord of the power adapter to a socket outlet with a grounding The cable distribution system should be grounded (earthed) in accordance with ANS/NFPA 70, the National Electrical Code (NEC), Article 820, in particular Section 820.93, Grounding of Outer Conductive Shield of a Coaxial Cable. Chapter 1 Introduction .......................................................................................................................... 1 Unboxing Information ................................................................................................................ 1 Product Overview ..................................................................................................................... 2 LED and Audio Behavior .......................................................................................................... 4 Chapter 2 Self-Setup and Activation ................................................................................................... 5 Installation, Activation, and Setup ............................................................................................ 5 Setting up the Verison Router ................................................................................................... 5 WPS Connection ...................................................................................................................... 5 Chapter 3 Product Specifications ....................................................................................................... 6 The Verizon Router provides superior Wi-Fi performance with Tri-band support and low latency to support gaming and VR use cases. The innovative design of the Verizon Router allows customers to connect their favorite devices to Chapter 1 Introduction Verizons 5G Network. Unboxing Information Inside the product package for the Verizon Router, you should find the following items:

Verizon Router 1 Power adaptor 1 Ethernet cable 1 1 Product Overview Front LED Bottom Bracket screw hole The LED lights up in different ways to indicate the connectivity status of the Verizon Description Router. Part LED 2 Rear panel WPS button Coax Reset pin hole RJ45 port DC jack Part Description WPS button Press this button once to connect the Verizon Router to Wi-Fi Extender or devices via WPS. After the pairing is successful, the LED light will stop blinking blue. RJ45 port Connect the Verizon Router to PC or switch via an Ethernet cable. Coax Connect the Verizon Router to your TV via a coaxial cable. Reset pin hole Factory reset the device by pressing the pin hole for 5 seconds. DC jack Connect the power adaptor to the DC jack to provide power to the Verizon Router from an electrical outlet. 3 LED and Audio Behavior Front LED Status Device booting up Soft blink white Solid white Setup complete 50% brightness solid white Signs of life Hard blink red Hardware/system failure; no Internet connectivity Soft blink white Firmware update/Factory reset in progress Fast blink red Firmware update error Soft blink yellow Wi-Fi is disabled Hard blink blue WPS pairing in progress Fast blink blue WPS pairing is successful Fast blink red WPS pairing has failed 4 Chapter 2 Setup and Activation Installation, Activation, and Setup This section describes how to set up and configure your Verizon Router. Setting up the Verizon Router 1. Unbox the Verizon Router, AC adaptor, and Ethernet cable. 2. Attach the power cord to the AC wall adapter power supply. 3. Plug the power cord into the power port on the back of the Verizon Router. 4. Plug the power adapter into an AC wall outlet. 2.3 WPS Connection WPS can be used to pair your Verizon Router to other devices by following these steps:

1. Short press the WPS button on your Verizon Router. 2. Short press the WPS button on the device with which you want to pair your Verizon Router, making sure the device is within range of the Verizon Router. 3. The Verizon Router will play a sound to indicate pairing is successful. 5 Chapter 3 Product Specifications Storage Router: 4 GB eMMC Dimensions 120 x 120 x 250.25 mm 2.4GHz 802.11ax 44 MIMO 5GHz 802.11ax 44 MIMO 6GHz 802.11ax 44 MIMO Backwards compatible with 11ac/11n/11b Router:

1 GB DDR4 RAM 2 1.344 KG 10GbE Ethernet 1 (WAN) 10GbE Ethernet 1 (LAN) 2.5GbE Ethernet 2 (LAN) MoCA2.5 1 (LAN) USB Type C 3.0 1 Sync button x 1 Reset button x 1 6 1. Wi-Fi Memory Weight Connector Button Operating Temperature 0 C40 C

SKU: LVXXXX BEL TE ee WwEerMiifiG@W |.E6E252240 ARAASr* 4+4n Dd AEC eyvono vn WEP WN. Pe a NON AN MAY RE

PART NUMBER COLOR 1 34.FLVR2.00104 PMS COOL GRAY 7C REVISIONS REV DESCRIPTION DATE APPROVED A CHANEG MODEL NAME 07/23/21 SANDY CHEN 30.1 15.1

. 4 5 2 9

. 7 5 COLOR 1 FOOT ,STAND ,LVR2 A4 34.FLVR2.00104 A 1/1 1 OF 1 DRAWN APVD AMANDA LAI SANDY CHEN 0.5mm 1mm 0.2mm 07/23/21 07/23/21 20 Park Avenue II, Hsinchu Science Park, Hsinchu 308,Taiwan, R.O.C.Tel: 886-3-6667799 Fax: 886-3-5788726

Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/ TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. FCC regulations restrict the operation of this device to indoor use only. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems.

Date: August 27, 2021 FCC ID: NKR-LVSK-R2A Dear Sir, I hereby have entrusted the following person to be a proxy regarding application for Type Certification. DEKRA Testing and Certification Co., Ltd. Address: No.372-2, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County 31061, Taiwan, R.O.C. Name: Louis Hsu Job Title: Deputy Manager Email: louis.hsu@dekra.com I am therefore responsible for the contents of the application. Brand Name and Model Name of the specified radio equipment: Verizon / CR1000A FCC ID: NKR-LVSK-R2A Product Name: Consumer Home Router Signature:

Name: Jean Huang TEL: 886-3-666-7799 FAX: 886-3-563-0789 Email: jean.huang@wnc.com.tw

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: 8/27/2021 Subject:

FCC ID:

To Whom It May Concern:

Request for Confidentiality NKR-LVSK-R2A Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Block Diagram Circuit Diagram Operational Description Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are request short-term confidential treatment for the following information until 180 days after the Grant date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device:

External Photos Internal Photos Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Sincerely yours, ___________________________ Name/Title: Jean Huang / Product Manager Applicant: Wistron Neweb Corporation ADDRESS: 20 Park Avenue II, Hsinchu Science Park, Hsinchu 308, Taiwan, R.O.C TEL: 886-3-666-7799 FAX: 886-3-563-0789 Email: jean.huang@wnc.com.tw

UNII Declaration Letter We have declared below featured for FCC equipment authorization, device FCC ID: NKR-LVSK-R2A

(1) DFS Device --

Master, Client without radar detection capability, Client with Radar detection capability, N/A Frequency Band

(MHz)

(2) Active / Passive Scanning , adhoc mode access point capability Active Scanning

(the device can transmit a probe

(beacon) 2412 2462 MHz 5180 5240 MHz 5260 5320 MHz 5500 5700 MHz 5745 5825 MHz Yes, Yes, Yes, Yes, Yes, No No No No No passive scanning

(where the device is can listen only with no probes) No No No No No Yes, Yes, Yes, Yes, Yes, Ad Hoc Mode capability Access point capability Yes, Yes, Yes, Yes, Yes, No No No No No Yes, Yes, Yes, Yes, Yes, No No No No No

(3) Country code selection ability -

No If no, pls explain how was implemented : No any software authorization for country code selections. Yes ,

(4) Meet 15.202 requirement -

pls check below :

Yes , No , A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.

(5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. No Apply , Apply ,

(If apply , pls help to provide explanation on how it was implement (By hardware or software , and how software was controlled) If you have any questions, please feel free to contact me at the address shown below. Yours sincerely, Signatory Jean Huang Product Manager

Wistron NeWeb Corp. AGENCY AUTHORIZATION LETTER Date: 2021-2-4

|, William Su, am senior compliance manager for Wistron NeWeb Corp. hereby authorize the following to act on our behalf, as our agent, in all matters relating to all processes required according to FCC/IC Approval for Wistron NeWeb Corp. products. Jean Huang This Letter of Authorization will expire on 12/31/2021, unless earlier revoked in writing. If you have any questions regarding the authorization, please don t hesitate to contact us. Sincerely, Sincerely, William Su / Senior Compliance Manager Wistron NeWeb Corp. Tel: 886-3-6667799 Ext 6688 E-mail: William.Su@wnc.com.tw

Wistron NeWeb Corporation 20 Park Ave. II, Hsinchu Science Park, Hsinchu 308, Taiwan Reference Test Data Statement Date: October 7, 2021 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: NKR-LVSK-R2A To Whom It May Concern:

We, Wistron NeWeb Corporation, hereby declare that all hardware designed and software except Bluetooth part are identical to the original FCC ID: NKR-LVSK-R2. According to KDB 484596 D01v01, we would like to reuse the original FCC ID: NKR-LVSK-R2 test data:

1. Original grant FCC ID: NKR-LVSK-R2, Under application FCC ID: NKR-LVSK-R2A. 2. The difference is Bluetooth hardware removed in this new application. 3. Reference the RF test data of part 15C and 15E. 4. Spot-check the radiated emission and radiated emission band edge tests for DTS, NII and 6ID test reports. Should you have any enquires or comments, please have my best attention. Sincerely, Signature Contact Name / Job Title: Jean Huang / Product Manager Email: jean.huang@wnc.com.tw

Date: August 27, 2021 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD Ref: sDoC declaration letter for equipment with FCC ID: NKR-LVSK-R2A To Whom It May Concern:

This letter is to ascertain that Wistron NeWeb Corporation Product Consumer Home Router has been the unit(s) used for conducting FCC compliance testing. The SDoC portion has been conducted in accordance with FCC SDoC requirement as per Section 2.1077 compliance information. FCC Supplier's Declaration of Conformity 47 CFR 2.1077 Compliance Information Unique Identifier: Trade Name: Verizon / Model Number: CR1000A Responsible Party U.S. Contact Information Company Name: Wistron NeWeb Corporation Company Address: 20 Park Ave. II, Hsinchu Science Park, Hsinchu 308, Taiwan Telephone number: 886-3-666-7799 It's herewith confirmed to comply with the requirements of FCC Part 15 Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Sincerely, Signature: ___________________________ FCC grantee contact person information. Applicant: Wistron NeWeb Corporation Name: Jean Huang TEL: 886-3-666-7799 FAX: 886-3-563-0789 Email: jean.huang@wnc.com.tw