User Manual User Manual Project Name:
IMQ7 Module Author: Wistron NeWeb Corporation Revision: 0.4 Revision Date: 2020/12/21 Normal Internal Use Confidential Restricted Confidential 1 / 36 Contact Information Technical Support website https://SupportIoT.wnc.com.tw Company Website www.wnc.com.tw Revision History Rev. #
Author Summary of Changes WNC First release WNC Update FCC/IC ID WNC Update operating voltage 0.1 0.2 0.3 0.4 WNC Update power class and FCC statement 2020/12/21 User Manual Date 2020/12/09 2020/12/14 2020/12/16 Normal Internal Use Confidential Restricted Confidential 2 / 36 User Manual Wistron NeWeb Corporation THIS DOCUMENT AND THE INFORMATION CONTAINED HEREIN IS PROPRIETARY AND IS THE EXCLUSIVE PROPERTY OF WNC AND SHALL NOT BE DISTRIBUTED, REPRODUCED, OR DISCLOSED IN WHOLE OR IN PART WITHOUT PRIOR WRITTEN PERMISSION FROM WNC. LIMITATION OF LIABILITY THIS DOCUMENT AND THE INFORMATION CONTAINED HEREIN IS PURELY FOR DESIGN REFERENCE AND SUBJECT TO REVISION BY WNC AT ANY TIME. NOTHING IN THIS DOCUMENT SHALL BE CONSTRUED AS GRANTING ANY WARRANTY OR RIGHT TO USE THE MATERIAL CONTAINED HEREIN WITHOUT WNCS PRIOR EXPRESS WRITTEN CONSENT. WNC SHALL NOT BE LIABLE FOR ANY USE, APPLICATION OR DEVELOPMENT DERIVED FROM THE MATERIAL WITHOUT SUCH PRIOR EXPRESS WRITTEN CONSENT. Normal Internal Use Confidential Restricted Confidential 3 / 36 User Manual Contents Contact Information................................................................................................................. 2 Revision History........................................................................................................................ 2 Contents.................................................................................................................................... 4 1. Introduction.......................................................................................................................... 6 1.1. RF band support........................................................................................................6 1.2. Features.................................................................................................................... 6 1.3. Connection Interface................................................................................................ 7 1.4. Environmental Specifications and Certifications...................................................... 7 1.4.1. Environmental Specifications........................................................................ 7 1.4.2. Certifications................................................................................................. 8 1.4.3. Green Product Compliance........................................................................... 8 2. Pin Definitions...................................................................................................................... 8 2.1. LGA Module Pin Diagram..........................................................................................8 2.2. LGA Module Pin Definitions......................................................................................9 3. Electrical Specifications...................................................................................................... 14 3.1. Power supply.......................................................................................................... 14 3.2. RF Specifications..................................................................................................... 14 3.2.1. Band support...............................................................................................14 3.2.2. Bandwidth support..................................................................................... 15 3.2.3. RF transmit specifications........................................................................... 15 3.2.4. RF receiver specifications............................................................................15 3.2.5. GNSS receiver specifications....................................................................... 16 Normal Internal Use Confidential Restricted Confidential 4 / 36 User Manual 4. Software Interface.............................................................................................................. 16 4.1. Support tools.......................................................................................................... 16 4.2. USB interface.......................................................................................................... 16 5. Mechanical..........................................................................................................................16 5.1. PCBA Form Factor................................................................................................... 16 6. Design Guide.......................................................................................................................19 6.1. Power supply...........................................................................................................19 6.2. RF connection......................................................................................................... 20 6.3. Reflow..................................................................................................................... 23 7. Labeling and Packaging...................................................................................................... 26 7.1. Labeling...................................................................................................................26 7.2. Packaging................................................................................................................ 26 7.3. MSL level.................................................................................................................28 8. Safety Recommendation....................................................................................................29 Initialisms................................................................................................................................33 Normal Internal Use Confidential Restricted Confidential 5 / 36 User Manual 1. Introduction The WNC IMQ7 module includes the Qualcomm MDM9205 Cat. M1 baseband, a complete LTE RF front-end, memory, and required circuitry to fulfill requirements of 3GPP E-UTRA
(Long Term Evolution - LTE, Rel-14 specifications). The IMQ7 module provides a variety of interfaces including USB, SPI, UART, GPIO, I2C, and USIM. 1.1. RF band support This section lists the main features and functions that the IMQ7 module supports. Table 1-1 specifies wireless technologies supported. Module LTE CAT M1 LTE CAT NB2 GPRS/EGPRS GNSS IMQ7 Table 1-1. IMQ7 module overview Note: = supported, = not supported 1.2. Features Feature list:
LTE 3GPP release 14 3GPP category support: LTE Cat. M1 with 1.2 Mbps for UL, 375 Kbps for DL LTE Support Bands:B4/13 Power Class 3: 23dBm GNSS: GPS, GLONASS Cortex A7 microprocessor (performance enhanced) IPv4/IPv6-supported AT command set LwM2M, FOTA Normal Internal Use Confidential Restricted Confidential 6 / 36 User Manual SMS over NAS Interfaces HS USB 2.0 with integrated PHY Dual UART interfaces (4 bit and 2 bit) for data transfer and diagnostic tools I2C/SPI interface USIM interface GPIOs ADC PCM/I2S 1.3. Connection Interface The IMQ7 module is LGA device. All electrical and mechanical connections are made through the 104 pads on the bottom side of a PCB. 1.4. Environmental Specifications and Certifications 1.4.1. Environmental Specifications The environmental specifications for both operating and storage conditions are defined in the Table below. Normal operating temperature range Extended operating temperature range Condition Temperature Range Remark 30 C to 60 C specifications Fully functional and in compliance with 3GPP 40 C to 85C RF performance may be affected outside the normal range, but the module will still function. Storage 40 C to 85 C Table 1-2. Temperature range Note: All temperatures above refer to ambient temperatures. Normal Internal Use Confidential Restricted Confidential 7 / 36 User Manual 1.4.2. Certifications The IMQ7 module is certified to be compliant with GCF,FCC regulations and standards. 1.4.3. Green Product Compliance RoHS (2011/65/EU) 2. Pin Definitions 2.1. LGA Module Pin Diagram The IMQ7 LGA module pin layout is illustrated below. Normal Internal Use Confidential Restricted Confidential 8 / 36 User Manual Figure 2-1. LGA pad diagram (top view) 2.2. LGA Module Pin Definitions A complete list with related details for the module pinout are listed in the Table below:
Pin No. Pin definition/type Voltage Level (V) 7 GND
0
Min. Typ. Max. Normal Internal Use Confidential Restricted Confidential 9 / 36 User Manual
0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0
RF_1(LTE TRX) RF_2(GNSS) 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 GND NC GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND NC GND GND GND Normal Internal Use Confidential Restricted Confidential 10 / 36 User Manual 2.85 2.85 2.85 2.85 2.85 2.85
1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 3.8 3.8 3.8 3.8 3.8 3.8
0 0 1.8 1.8 1.8 1.8 0 0 1.8 1.8 1.8 1.8 1.8 1.8 0 0 4.5 4.5 4.5 4.5 4.5 4.5
1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 80 81 82 83 84 85 VCC1 VCC2 VCC3 VCC4 VCC5 VCC6 NC GND GND GPIO46 GPIO47 GPIO48 GPIO49 GND GND GPIO01 GPIO02 GPIO80 GPIO81 GPIO82 GPIO83 GND GND Normal Internal Use Confidential Restricted Confidential 11 / 36 86 87 88 89 90 91 92 93 94 95 96 97 98 99 USB_Dp USB Detect USB_Dn UART2_RTS NC UART2_CTS UART0_CTS UART0_TX UART2_TX UART0_RX UART2_RX UART0_RTS GPIO98 GPIO99 100 GPIO100 101 GPIO101 102 GPIO102 103 GPIO103 User Manual 1.7 1.8 1.9 Note6 Note6
1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7
1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.8
1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 130 GPIO06/vGPIO Data In/AUX_ADC1 131 GPIO07 132 GNSS_EN/GPIO08 133 UIM_VCC/1.8V 134 UIM DATA Normal Internal Use Confidential Restricted Confidential 12 / 36 User Manual 135 UIM CLK 136 UIM RESET 137 UIM DETECT 138 RFFE3_CLK/GPIO138 139 GND 140 RFFE3_DATA/GPIO140 141 WWAN_STATE 142 Power on 143 WAKEUP_OUT 144 WAKEUP_IN 145 RESET 146 VREF 208 SPI_EN 209 SPI_CLK 210 SPI_MOSI 211 SPI_MISO 212 GND 213 GND 214 GND 215 GND 216 GND 217 GND 218 GND 1.7 1.7 1.7 1.7
1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7
1.8 1.8 1.8 1.8 0 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 0 0 0 0 0 0 0 1.9 1.9 1.9 1.9
1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9
Normal Internal Use Confidential Restricted Confidential 13 / 36 User Manual 219 GND 220 PS_HOLD 221 Force usb boot 222 UART1_RX (UART 1) 223 UART1_TX (UART 1)
1.7 1.7 1.7 1.7 0 1.8 1.8 1.8 1.8
1.9 1.9 1.9 1.9 Table 2-1. Module pin definitions 3. Electrical Specifications 3.1. Power supply The IMQ7 module receives and supplies power with the following potentials:
Direction Vmin Typical Vmax Power (3742) In 2.85 V VREF UIM_VCC Out Out 1.71 V 1.71 V 3.8 V 1.8 V 1.8 V 4.5 V 1.89 V 1.89 V Table 3-1. Power supply 3.2. RF Specifications 3.2.1. Band support Normal Internal Use Confidential Restricted Confidential 14 / 36 User Manual LTE CAT M1 Uplink (MHz) Downlink (MHz) LTE Band 4 17101755 21102155 LTE Band 13 777-787 746-756 Table 3-2. Band support 3.2.2. Bandwidth support Band Bandwidth 1.4 MHz 3 MHz 5 MHz 10 MHz 15 MHz 20 MHz LTE Band 4 LTE Band 13
Table 3-3. LTE CAT-M1 Bandwidth support 3.2.3. RF transmit specifications Band Parameter Unit Min. Typ. Max. LTE Band 4 Max. TX Power 10 MHz 4 RBs/QPSK dBm 20.3 LTE Band 13 Max. TX Power 10 MHz 4 RBs/QPSK dBm 20.3 23 23 25.7 25.7 Table 3-4. Conductive Tx output power Note: 1. RF transmitter specifications are defined at the LGA pad. 2. The IMQ7 series meets 3GPP TS 36.521-1test standards. Normal Internal Use Confidential Restricted Confidential 15 / 36 User Manual 3.2.4. RF receiver specifications LTE Band Items Parameter Unit Typ. 3GPP limit LTE Band 4 RX Sensitivity 5 MHz with 4 RBs dBm LTE Band 13 RX Sensitivity 5 MHz with 4 RBs dBm
-102.3 99.3 Table 3-5. Conductive Rx sensitivity-3GPP Note: 1. RF receiver specifications are defined at the LGA pad. 2. The IMQ7 series meets 3GPP TS 36.521-1 test standards. 3.2.5. GNSS receiver specifications One GNSS SAW filter, LNA need to be used between the module and antenna. in 4. Software Interface 4.1. Support tools The IMQ7 module is compatible with the following support tools:
WNC IMQ7 Connection Manager (WNCCM) (TBD) 4.2. USB interface The IMQ7 module supports 3GPPs standard AT commands and proprietary AT commands. Normal Internal Use Confidential Restricted Confidential 16 / 36 User Manual 5. Mechanical 5.1. PCBA Form Factor The IMQ7 module has the same dimensions as the PCBA:
15.5 mm 21.5 mm 2.4 mm(typical) Figure 5-1. PCBA dimensions Normal Internal Use Confidential Restricted Confidential 17 / 36 User Manual Figure 5-2. Pad dimensions (bottom view) Normal Internal Use Confidential Restricted Confidential 18 / 36 User Manual Figure 5-3. Recommend PCB footprint Normal Internal Use Confidential Restricted Confidential 19 / 36 User Manual 6. Design Guide 6.1. Power supply power levels. The LTE module power input is VCC. The internal power chipset will transform VCC to other Power Pin Name Pads Description Voltage Level (V) Min. Typ. Max. VCC VCC1 to VCC6 Nos. 37 to 42 Main Power Supply 2.85 3.8 4.5 Table 6-1. Power supply voltage level The IMQ7 module includes an integrated power manager that enables single and direct voltage supply from the battery and reduces the overall bill of materials. The typical voltage of 3.8V is recommended. Schematic suggestion: We highly recommend separating module power supply into two paths to maintain clean power as shown below for TX spurious performance. The VPH_PWR is for baseband and RF circuits. Layout Suggestion: 22F, 0.1uF, 12pF and 8pF capacitors must be placed as close to VCC pins as possible. Each power trace must possess sufficient line width to withstand its respective current load, as listed in the table below:
Normal Internal Use Confidential Restricted Confidential 20 / 36 User Manual Net Name VCC(13) total VCC(46) total UIM_VCC VREF Current Value 1A 1A 150 mA 300 mA The IMQ7 module has three RF pads; developers must connect them via 50 traces to the 6.2. RF connection main board. RF_1(LTE TRX) (Pin15) LTE RX/TX path RF_2(ANSS) (Pin21) GNSS path We recommend that no grounds are present under the surface of RF pads in the layout. Details are included below. Layer2 has the same keep-out size as Layer1 Normal Internal Use Confidential Restricted Confidential 21 / 36 User Manual Figure 6-1. RF pad layout suggestion The characteristic impedance depends on the dielectric of PCB, the track width and the ground plane spacing. Microstrip type is required. The detail simulation as below. Normal Internal Use Confidential Restricted Confidential 22 / 36 User Manual The RF trace of the test board which was used in the FCC test is defined as below. Microstrip RF trace Normal Internal Use Confidential Restricted Confidential 23 / 36 User Manual 6.3. Reflow other boards. This section details the recommended reflow profile when the module is mounted onto Temp. Region 1 2 3 4 5 6 7 8 9 10 11 Upper temp. region 160 170 180 180 180 205 225 230 240 250 245 Lower temp. region 160 170 180 180 180 205 225 230 240 250 245 Conveyer band speed 90 cm/minute Normal Internal Use Confidential Restricted Confidential 24 / 36 User Manual PWI = 48%
U10-1 T1-2 J3-3 U42-4 Preheat from 140190C Melt-out Time/230C 81.48 34%
46.91
-31%
81.13 36%
49.26
-7%
81.94 32%
53.50 35%
79.07 48%
48.18 18%
Temp. Difference 2.87 6.59 Max Temp Total Time/217C 240.40 241.34 241.84 241.32 1.44 4%
13%
18%
13%
81.18
-15%
82.95
-8%
87.61 10%
81.24 15%
6.43 Normal Internal Use Confidential Restricted Confidential 25 / 36 User Manual Gradient1 (100150C) 1.88 25%
1.91 28%
1.87 25%
1.86 24%
0.05 Process limit:
Solder Paste Profile feature Gradient1 (Target = 1.5) (100 C150 C)
(Time period = 20 s) Preheat time from 140 C to 190 C Time maintained above 230 C Peak package body temperature Time maintained above 217 C Lead-free Min. Max. 0 70 40 230 60 3 105 60 250 110 Unit C/S S S C S Normal Internal Use Confidential Restricted Confidential 26 / 36 User Manual 7. Labeling and Packaging 7.1. Labeling Figure7-1 is a drawing showing a label for the IMQ7 module. Figure 7-1. Label drawing (TBD) 7.2. Packaging Tape-and-Reel Package Modules are delivered in tape-and-reel based on MPQ (1000 pcs./reel).4 reel/carton. Figure 7-2. Packaging--tape Normal Internal Use Confidential Restricted Confidential 27 / 36 User Manual Figure 7-3. Packagingreel Single Package for Samples SMT. 50 pcs./box; no vacuum packaging; must be baked for at least eight hours at 85 C before Normal Internal Use Confidential Restricted Confidential 28 / 36 User Manual Figure 7-4. Packagingcarton 7.3. MSL level The IMQ7 module has an MSL level of 3. Normal Internal Use Confidential Restricted Confidential 29 / 36 User Manual 8. Safety Recommendation FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/ TV technician for help. This module is intended for OEM integrator. The OEM integrator is responsible for the compliance to all the rules that apply to the product into which this certified RF module is integrated. Additional testing and certification may be necessary when multiple modules This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired This radio transmitter FCCID:NKRIMQ7 has been approved by FCC to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use are used. operation. with this device. Antenna List Normal Internal Use Confidential Restricted Confidential 30 / 36 User Manual No. Manufacturer Part No. Antenna Type Peak Gain (dBi) 1 WIESON GY115HT0330-041 Dipole 1.66 USERS MANUAL OF THE END PRODUCT In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. LABEL OF THE END PRODUCT The final end product must be labeled in a visible area with the following " Contains TX FCC ID: NKRIMQ7". IC Statement:
CAN ICES-3 (B)/NMB-3 (B) Canada, Industry Canada (IC) Notices This device complies with Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and Normal Internal Use Confidential Restricted Confidential 31 / 36 User Manual
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Canada, avis d'Industry Canada (IC) Cet appareil est conforme avec Industrie Canada exemptes de licence RSS standard(s). Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interfrence et (2) cet appareil doit accepter toute interfrence, notamment les interfrences qui peuvent affecter son fonctionnement. Radio Frequency (RF) Exposure Information This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Informations concernant l'exposition aux frquences radio (RF) Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20cm de distance entre la source de rayonnement et votre corps. This radio transmitter IC: 4441A-IMQ7 has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Cet metteur radio IC: 4441A-IMQ7 a t approuv par Industrie Canada pour fonctionner avec les types d'antennes numrs ci-dessous avec le gain maximal admissible et impdance d'antenne requise pour chaque type d'antenne indiqu. Types d'antennes n'est pas inclus dans cette liste, ayant un gain suprieur au gain maximal indiqu pour ce type, sont strictement interdits pour une utilisation avec cet appareil. Antenna List Normal Internal Use Confidential Restricted Confidential 32 / 36 User Manual No. Manufacturer Part No. Antenna Type Peak Gain (dBi) 1 WIESON GY115HT0330-041 Dipole 1.66 Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. En vertu de la rglementation de l'industrie du Canada, cet metteur de radio ne peuvent fonctionner en utilisant une antenne d'un type et maximum (ou moins) Gain approuv pour l'metteur par Industrie Canada. pour rduire risque d'interfrence aux autres utilisateurs, le type d'antenne et son gain doivent tre choisis de sorte que la puissance isotrope rayonne quivalente (PIRE) ne dpasse pas ce qui est ncessaire pour la russite de communication. This module is intended for OEM integrator. The OEM integrator is responsible for the compliance to all the rules that apply to the product into which this certified RF module is integrated. Additional testing and certification may be necessary when multiple modules are used. L'intgrateur OEM doit tre conscient de ne pas fournir des informations l'utilisateur final quant la faon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intgre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations rglementaires requises et avertissements comme indiqu dans ce manuel. USERS MANUAL OF THE END PRODUCT In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the IC radio-frequency exposure guidelines for an Normal Internal Use Confidential Restricted Confidential 33 / 36 User Manual uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. LABEL OF THE END PRODUCT The final end product must be labeled in a visible area with the following " Contains TX IC:
4441A-IMQ7". CE Statement:
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Initialisms Table 1. Initialisms and definitions Abbreviation Definition AC DC ETSI Alternating Current Direct Current European Telecommunications Standards Institute Normal Internal Use Confidential Restricted Confidential 34 / 36 User Manual GND GPS GNSS GPIO I/O IoT I2C LGA LTE Mbps MIPS N/A OS PCM SIM SMA SPI UART UIM USB Vref WNC Ground Global Positioning System Any single or combined satellite navigation system (GPS, GLONASS and combined GPS/GLONASS) General Purpose Input Output Millions of Instructions Per Second Input/Output Internet of Things Inter-Integrated Circuit Land Grid Array Long Term Evolution Megabits per second Not/Applicable Operating System Pulse Code Modulation Subscriber Identity Module Surface Mount Antenna Serial Peripheral Interface User Identity Module Universal Serial Bus Voltage reference Wistron NeWeb Corporation Universal Asynchronous Receiver-Transmitter Normal Internal Use Confidential Restricted Confidential 35 / 36 User Manual RFU Reserved For Future Use Normal Internal Use Confidential Restricted Confidential 36 / 36