all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 1.13 MiB | / September 07 2004 | |||
1 | Cover Letter(s) | / September 07 2004 | ||||||
1 | External Photos | / September 07 2004 | ||||||
1 | ID Label/Location Info | / September 07 2004 | ||||||
1 | Internal Photos | / September 07 2004 | ||||||
1 | Operational Description | / September 07 2004 | ||||||
1 | Test Report | / September 07 2004 | ||||||
1 | Test Setup Photos | / September 07 2004 | ||||||
1 | Test Setup Photos | / September 07 2004 |
1 | Users Manual | Users Manual | 1.13 MiB | / September 07 2004 |
Instruction Manual Model XTR1 To Activate your Satellite Radio Receiver or for latest news and questions regarding Sirius Satellite Radio service visit www.sirius.com or call 1-888-539-SIRIUS (7474). For accessory & product information visit us at www.getxact.com. KEEPMOVING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the Manufacturer for compliance could void the users authority to operate the equipment. COPYRIGHT / TRADEMARKS No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical, photocopying, recording or otherwise without the prior writing of the publisher. is a registered trademark of SIRIUS Satellite Radio. To Activate your Satellite Radio Receiver or for latest news and questions regarding Sirius Satellite Radio service visit www.sirius.com or call 1-888-539-SIRIUS (7474). SAFETY PRECAUTIONS Warning Follow these notifications to avoid any traffic accidents or personal injury:
1. Installation must be performed according to this user guide. 2. Do not install the device where it may obstruct your view through the windshield or of your vehicles indicator displays. 3. Do not install the device where it may hinder the function of safety devices such as an airbag. Doing so may prevent the airbag from functioning properly in the event of an accident. 4. The installation and usage suggestions contained in this user guide are subject to any restrictions or limitations that may be imposed by applicable law. The purchaser should check applicable law for any restrictions or limitations before installing and/or operating this device. 5. Failure to follow these safety instructions and warnings may result in a severe accident. Danger Be aware of the following precautions to prevent fire and avoid personal injury:
1. To avoid short circuits, never put or leave any metallic objects (coins, tools, etc.) inside the device. 2. If the device emits smoke or strange smells, turn the power off immediately and contact your dealer. 3. Do not drop the device or subject it to strong shocks. 4. If the LCD display becomes damaged or broken, do not touch the liquid crystal fluid. The fluid may be dangerous to your health or even fatal. If the liquid crystal fluid contacts your body or clothing, immediately wash it off with soap and water. Caution Do not operate this device in a way that might divert your attention from driving safely. As a driver, you are responsible for safely operating your vehicle in accordance with traffic safety laws at all times. TABLE OF CONTENTS Introduction Product Overview Package Contents Components Guide Xact Stream Jockey Sirius Radio Wireless Remote Controller Getting Started Mounting your Xact Stream Jockey Satellite Radio at Home Mounting your Xact Stream Jockey Satellite Radio in a Vehicle Activating your Sirius Subscription Basic Operations Tuning to Different Entertainment Categories Searching for Music Searching for Music by Channel Searching for Music by Artist/Composer Searching for Music by Song Direct Tuning Presetting Channels Searching for a preset Channel/Artist/Song S-seek Function Memo (memory Search) Button Performing S-Seek Function Menu Options Settings Basic Setting Procedure Sirius ID Display Settings FM transmitter Channel Add/Skip Lock Options Audio Level Antenna Aiming Sirius Satellite Map Memory Options Time Based Features Clock Hour Format Time Zone 1 Page 3 Page 3 Page 3 Page 4 Page 4 Page 5 Page 6 Page 6 Page 6 Page 7 Page 12 Page 12 Page 13 Page 13 Page 13 Page 14 Page 14 Page 15 Page 16 Page 17 Page 19 Page 20 Page 20 Page 20 Page 22 Page 22 Page 23 Page 23 Page 25 Page 26 Page 26 Page 27 Page 28 Page 29 Page 29 Page 29 TABLE OF CONTENTS Daylight Savings Time Alarm Clock Time Program Alert Day Channel Selection Auto Shutdown Sleep Mode Factory Default Settings Display Messages Problem Solving Warranty Page 30 Page 30 Page 30 Page 31 Page 32 Page 32 Page 32 Page 33 Page 33 Page 35 Page 37 Page 38 2 INTRODUCTION Overview Thank you for purchasing this product! Your new plug and play XACT Stream Jockey satellite radio is specifically designed to mount in a vehicle or indoor/outdoor location. Package Contents Carefully unpack your kit box and ensure that you have the following items. XACT Stream Jockey Sirius Receiver Wireless Remote Control AAA Batteries (for the Wireless Remote Control) Users Guide In the event that any item is missing or if you find any mismatch or damage, promptly contact your dealer. Your Xact Stream Jockey Satellite Radio Receiver must be used in conjunction with any one of the following Xact Kits, such as the Universal kit, Home kit or Boom box as required by you specific needs. Xact Vehicle Kit:
Xact Home Kit:
Xact Universal Kit:
Xact Sound Pad Portable Boom Box:
Xact Sound System Portable Boom Box:
Xact Sound System Deluxe Portable Boom Box:
Xact Power Pod Portable Battery Pack:
Model Number XS021 Model Number XS022 Model Number XS01UK Model Number XS024 Model Number XS025 Model Number XS027 Model Number XS028 The easiest way to Activate your Satellite Radio Receiver is to log on to www.sirius.com. You may also call 1-888-539-SIRIUS (7474). 3 3 COMPONENTS GUIDE XACT Stream Jockey Sirius Radio 13 7 8 9 10 11 12 1 2 6 3 4 5 1. Earphone Socket 2. LCD Monitor (Main Display) 3. CHANNEL (Ascend/Descend Buttons) 4. DISP (Display) 5. CATEGORY (Left/Right Directional Buttons) 6. BAND (P-TUNE) 7. 8. Power Button 9. MENU Options List 10. SELECT (OK Button) 11. MEMO (S-seek) 12. Numerical Keys 13. Volume Adjustment IR for Remote Control 4 4 COMPONENTS GUIDE Wireless Remote Control The wireless remote controller packed with your plug and play XACT Stream Jockey satellite radio mirrors the operations of your plug and play XACT Stream Jockey satellite radio receiver from a remote location. 1 2 3 4 5 6 7 8 9 10 11 12 13 1. CHANNEL (Ascend/Descend Buttons) 2. MUTE 3. BAND 4. DISP (Display) 5. P-TUNE 6. MEMO 7. Power Button 8. SELECT (OK Button) 9. CATEGORY (Left/Right Directional Buttons) 10. Volume Adjustment 11. MENU Options List 12. S-seek 13. Numerical Keys 5 5 GETTING STARTED Mounting Your XACT Stream Jockey Satellite Radio at Home Find an appropriate location near your stereo receiver to install your plug and play satellite radio receiver. Mounting Your XACT Stream Jockey Satellite Radio in a Vehicle Find an accessible location in your vehicle to install your plug and play satellite radio receiver;
usually, this is the dashboard. Do not mount your device where it may obstruct your view through the windshield or your view of your vehicles indicator displays. Do not mount your device where it may impede your access to the vehicles controls. Do not mount your device where it may hinder the function of safety devices, such as an airbag.Doing so may prevent the airbag from functioning accordingly in the event of an accident. Mount your satellite radio where it can be easily reached. The device must be directly in line-of-sight of the remote controller. 6 6 Activating Your Sirius Subscription Before beginning to use your new device, you must first register to the SIRIUS Satellite Radio service. There are two ways to activate the SIRIUS Satellite Radio Service:
1. Link to http://www.sirius.com and click Activate, then follow the on-screen instructions. 2. Call SIRIUS at 1-866-845-7474. A representative will help you activate your SIRIUS Satellite Radio Service. Note:Make sure to have your identification number accessible when calling SIRIUS. Make Note of Your Identification Number Activating your SIRIUS Satellite Radio Service:
1. Press MENU to enter the Menu Options settings. Menu Options Sirius ID Display Settings FM Transmitter Channel Add/Skip Category 12:00P Lock Options 2. Press the or button and select SIRIUS ID. Your own devices 12-digit SIRIUS ID Number (ESN) will be displayed on the screen. 7 7 Sirius IDCategory 12:00P ESN 000492228912 IF YOU HAVE PURCHASED A VEHICLE KIT INSTALLATION 1. 2. 3. 4. 5. PLACE CAR BASE HOOKS INTO LOCKING SLOT & PUSH THUMB TAB IN... 8
...ROTATE RECEIVER UNIT BACKWARDSTO ENGAGE HOOKS .THUMB LATCH PULLED BACK......THUMB LATCH RELEASED, BRACKET LATCH CLIPS RECEIVER SECURELY IN PLACE. IF YOU HAVE PURCHASED A HOME KIT INSTALLATION 1. 3. 2. 4. FOR HOME DESKTOP APPLICATION, USER PULLS OUT FEET USING THUMB GRIP 9 SMB Antenna PlugAntenna JackAudio PlugAudio JackDC Power PlugDC Power JackTHUMB LATCH PULLED BACK......THUMB LATCH RELEASED, BRACKET LATCH CLIPS RECEIVER SECURELY IN PLACE. IF YOU HAVE PURCHASED A UNIVERSAL KIT INSTALLATION 1. 2. 3. 4. 5. 6. FOR HOME DESKTOP APPLICATION, USER PULLS OUT FEET USING THUMB GRIP 10 SMB Antenna PlugAntenna JackAudio PlugAudio JackDC Power PlugDC Power JackTHUMB LATCH PULLED BACK......THUMB LATCH RELEASED, BRACKET LATCH CLIPS RECEIVER SECURELY IN PLACE. MOUNT TO VEHICLE DASH BOARD VIA ADHESIVE TAPEPLACE CRADLE OVER MOUNT PLATE SLIDE BACKTO LOCK FOR VEHICLE INSTALLATION IF YOU HAVE PURCHASED A BOOM-BOX KIT INSTALLATION 1. PUSH RECEIVER ONTO CONNECTOR 2. ROTATE RECEIVER AND CONNECTOR INTO BOOM-BOX 3. LATCH BOOM-BOX LOCKS RECEIVER IN PLACE 11 BASIC OPERATIONS After your SIRIUS subscription is activated, the Normal (default) Operation screen will pop up. stream name 3-digit stream number song title Channel Name 003 001 Channel Name Artist Song 001 Channel Name 001 Channel Name 001 Channel Name artists name signal strength indicator Category 12:00P A band or preset bank number Tuning to Different Entertainment Categories category name clock 1. Press the or button to search for channels. 2. Press the or button to scroll through music categories. 3. When the category you desire is highlighted (for example, Jazz), press the button to confirm the setting. 4. Press the button again to return to Normal Operation mode. 5. Press the power button to turn power 12 12 003001 Channel Name001 Channel Name001 Channel Name001 Channel NameCategory 12:00PArtistSongChannel NameACategory001 Channel Name002 Channel Name003 Channel Name004 Channel Name005 Channel Name Searching Music Your satellite radio offers you three ways to seek and select music: by the channel name, by artist/composer and by song title. Searching For Music By Channel (Channel List) 1. Press and hold the button while in Normal Operation mode. The Channel list screen will be displayed, numerically indicating all available channels, regardless of music category. 001 Channel Name 002 Channel Name 003 Channel Name 004 Channel Name 005 Channel Name 006 Channel Name 2. Press the or button continuously to choose a preferred channel and press the button to confirm the setting. 3. Press and hold the button again to exit from the operation. Note:The selected channels will remain playing until you make a new change. Searching For Music By Artist/Composer (Artist/Composer List) 1. Press and hold the button while in Normal Operation mode. 2. You will first see the Channel list menu. Press the button again. The Artist/Composer list screen will be displayed, listing all currently playing artists, regardless of category. On channels that broadcast composer the Composer name will be displayed with the Artist name separated by a slash /. 3. Press the or button continuously to choose a preferred artist and press the button to confirm the setting. 4. Press and hold the button again to exit from the operation. 13 13 002 Artist/Composer003 Artist/Composer004 Artist/Composer005 Artist/Composer006 Artist/Composer001 Artist/Composer Searching For Music By Song (Song Title List) 1. Press and hold the button while in Normal Operation mode. 2. Continue pressing the button twice. The Song Title list screen will be displayed, indicating all currently playing songs, regardless of category. The song title data is listed in ascending order. 001 Song Title 002 Song Title 003 Song Title 004 Song Title 005 Song Title 006 Song Title 3. Press the or button continuously to choose a preferred song and press the button to confirm the setting. 4. Press and hold the button again to exit from the operation. Direct Tuning Your XACT Stream Jockey satellite radio enables you to access your selected channels directly. 1. Press the button to activate the Direct Channel Entry mode. 2. The corresponding window is displayed and asks you to enter the desired channel number (3 digits). 3. Use the or left/right directional button until the desired digit is highlighted. 4. Press the button to confirm the setting. 14 14 0123456789# ___Enter Channel Presetting Channels Your XACT Stream Jockey satellite radio allows you to preset 18 channels. This design enables you to directly select between 6 different bands of preset channels (identified as A, B, C, D, E and F). Each band contains 3 specific channels (indicated as A1, A2, A3.F1, F2 and F3, etc.). 1. Press the or button to search for channels. 2. Press and hold the button to switch to Preset Tuning Mode. Preset Tuning mode enables you to set your desired bands (A-F) according to your preference. 3. Press the button to confirm your setting. 001 Channel Name Artist Song Preset Tuning Mode Category 12:00P A 1. Once the desired band is set, press and hold the 1,2 or 3 numerical button to select the specific channel. The list will then be recorded in memory. 2. The selected preset number will flash and remain lit on the display screen to demonstrate that it has been memorized. Note:If a channel is already recorded in the preset list, the new channel will overwrite the old one. 15 15 003001 Channel Name001 Channel Name001 Channel Name001 Channel NameCategory 12:00PArtistSongChannel NameA-1003001 Channel Name001 Channel Name001 Channel Name001 Channel NameCategory 12:00PArtistSongChannel NameA-1 Searching for a Preset Channel/Artist/Song 1. Press and hold the button while in Normal Operation mode. The screen will switch between the Normal Operation mode and the Preset Tuning mode. 2. Press and hold the button until the Preset Channel list pops up. 3. Press the button continuously until the preferred Preset Channel list is indicated. 4. Each time you press the button, the Preset lists switches from Channel Name to Artist/Composer to Song Title cyclically. A-1 Channel Name A-2 Channel Name A-3 Channel Name B-1 Channel Name B-2 Channel Name B-3 Channel Name 5. Press the button to confirm the setting. 16 16 A-2 Artist/ComposerA-3 Artist/ComposerB-1 Artist/ComposerB-2 Artist/ComposerB-3 Artist/ComposerA-1 Artist/ComposerA-2 Song TitleA-3 Song TitleB-1 Song TitleB-2 Song TitleB-3 Song TitleA-1 Song Title S-seek Function_MEMO (Memory Search) Button When in this mode, you can activate the memory search function. This will instruct your satellite radio to search the current incoming SIRIUS signal and alert you when a song you have saved is being played. Memory 1/10 Artist Song To Store the Information Under the Normal Operation mode or the Preset Tuning mode, press the button. The current program data information is recorded in memory. A beep tone sounds indicating the data has been stored, and the capacity status is displayed. What If You Have Already Recorded the Same Artist/Song?
Your satellite radio automatically checks your recorded data information and compares it with the newly selected program. If the newly selected program has already been recorded, to avoid duplication no entry will be made. 1717 001Category 12:00PArtistSongAChannel NameAlready Stored001Category 12:00PArtistSongAChannel NameStored001Category 12:00PArtistSongAChannel NameX Used/Y Empty What If the Program Storage is Full?
If the Program Storage is full, a Memory Full message will pop up on the screen for a moment, followed by a Replace/Cancel message. 1. Under Normal Operation mode or in Preset Tuning mode, press the button. 2. Press the or button to select either Replace or Cancel. 3. Press the button to confirm the setting. Replace: Do the following to select the program to be overwritten with the new Artist/Composer or Song Title. 3a. Press the button, and the follow-up screen will be displayed. Replace Artist/Composer Artist/Composer Artist/Composer Artist/Composer Artist/Composer 3b. Press the or button to scroll the the programs. 3c. Press the button to replace with the new selection. Cancel:To avoid overwriting the stored selection, wait for the original screen to be displayed again. 18 18 001Category 12:00PArtistSongAChannel NameMemory Full001Category 12:00PArtistSongAChannel NameReplaceCancel How to Perform the S-seek Function Whenever you turn your satellite radio on, it automatically searches the incoming signal to determine if a match exits between the signal and the artist/composers or song titles that you have recorded in memory
(except when S-seek is set to Off). Select Off (to deactivate the programs searching) or On (to activate the program searching) by using the or button. Then press the button to confirm the setting. Memory Recall Delete S-Seek Category 12:00P Deleting the Recorded Programs (Artist/Song) 1. Press and hold the button. The recorded programs list is displayed. 2. Press the or button to scroll through programs. 3. Press the button to enter the sub-menu. 4. Press the or button to select Delete. 5. Press the button again to confirm the setting. 19 19 S-SeekOnCategory 12:00P OffMemory RecallDeleteCategory 12:00P S-SeekDeleteYesCategory 12:00P No MENU OPTIONS SETTINGS The following options are included on the Menu Options list:
SIRIUS ID Display Settings FM Transmitter Channel Add/Skip Lock Options Audio Level Antenna Aiming Memory Options Time Based Features Factory Default BASIC SETTING PROCEDURE 1. Press the button. The Menu Options list is displayed on the screen. 2. Press the or button to select a desired item 3. Press the button, and the selected Option Setting pops up. 4. Set the Option Setting to your preference according to the steps described below. 5. To exit the Menu Options list, press and hold the button. Sirius ID Refer to Make a Note of Your Identification Number for details. Menu Options Sirius ID Display Settings FM Transmitter Channel Add/Skip Category 12:00P Lock Options 20 20 Display Settings The following adjustments can be made:
Dimming Control Contrast Control Menu Options Sirius ID Display Settings FM Transmitter Channel Add/Skip Category 12:00P Lock Options Dimming Control: A 10-segment horizontal bar graph is displayed. Move the or left/right directional button to adjust the dimming control function accordingly. By pressing the button or by taking no action, you will return to the Menu Operations list. Contrast Control: A 10-segment horizontal bar graph is displayed. Move the or left/right directional button to adjust the contrast control function accordingly. By pressing the button or by taking no action, you will return to the Menu Operations list. 2121 Dimming Control-+Contrast Control-+FM Transmitter The following adjustments can be made:
Channel Selection FM On/Off Menu Options Sirius ID Display Settings FM Transmitter Channel Add/Skip Category 12:00P Lock Options Channel Selection: enables you to select any one of the pre-programmed FM channels. Press the or button to select a desired channel, then press the button to confirm the setting. FM On/Off: To activate/deactivate the FM transmitter. 22 22 FM TransmitterChannel SelectionCategory 12:00P FM On/OffFM Channel88.1 MHz88.3 MHz88.5 MHz88.7 MHz88.9 MHzFM On/OffOnCategory 12:00P Off Channel Add/Skip You can add or skip new/unwanted channels while tuning. When you enter this option, a channel list is displayed, and the current channel playing will be highlighted. Menu Options Sirius ID Display Settings FM Transmitter Channel Add/Skip Category 12:00P Lock Options Press the or button to navigate the list and highlight the channel you want to skip, then press the button to confirm the setting. A Skip message pops up next to the channel displayed. To activate the skipped channel again, repeat the same steps and delete the Skip message. While adding the channel, the message Skip is removed from alongside the channel name, and the system will no longer skip this channel. Lock Options Access to particular channels can be set with codes. When you intend to tune in to these particular channels, your receiver will require you to enter the access passwords. The following adjustments can be made:
Lock/Unlock Edit Code 23 23 Add/Skip001 Channel Name002 Channel Name003 Channel Name004 Channel Name005 Channel NameSkipSkipMenu OptionsSirius IDDisplay SettingsFM TransmitterLock OptionsChannel Add/Skip Lock Options Lock/Unlock Edit Code Category 12:00P Lock/Unlock: When using Lock/Unlock for the first time, you are asked to type in the 4-digit code that is used to Lock/Unlock the channel access. Press the 0 button four times to enter the default Access Code: 0000 Thereafter, each time you enter this mode, a channel list will be displayed and the currently playing channel will be highlighted. Press the or button to select a channel you want to lock, then press the button to confirm the setting. The message Lock pops up next to the channel. Edit Code: You may change the access password (default code: 0000) to your preference. 1. When you enter this mode, press the or left/right directional button to enter the current access code
(4-digit default code: 0000 or your previously entered current code) A New Code message pops up. 24 24 0123456789# ____Enter CodeLock/Unlock001 Channel Name002 Channel Name003 Channel Name004 Channel Name005 Channel NameLockLockLock OptionsLock/UnlockCategory 12:00P Edit Code New Code
# ____ 0123456789 2. Enter the numbers for your new access code by using the or left/right directional buttons. The confirmation screen will then be displayed. 3. Enter the numbers for your new access code again by using or left/right directional buttons. Your new access password is now modified. Audio Level Your plug and play satellite radio enables you to adjust audio level. When entering this option, a 10-segment horizontal bar graph is displayed on the screen with a (-) sign to the left and a (+) sign to the right. Press the or left/right directional button to adjust the suitable audio level, then press the button to confirm the setting. 25 25 Confirm CodeCode SavedMenu OptionsDisplay SettingsFM TransmitterChannel Add/SkipAudio LevelLock OptionsAudio Level-+Antenna Aiming Note:This adjustment setting is required only when you use your device at home. This way, you can assure optimum reception when mounting your SIRIUS antenna. Menu Options FM Transmitter Channel Add/Skip Lock Options Audio Level Antenna Aiming Upon entering this option, two 10-segment horizontal bar graphs are displayed with a (-) sign to the left and a
(+) sign to the right. One is label SAT (satellite signal) and the other TER (terrestrial signal strength). The current setting is indicated on the bar graphs. Press the or left/right directional button for adjustment and press the button or take no action to confirm the setting and automatically exit this option. Sirius Satellite Map Due to the paths of Sirius satellites over the US, the best location for the antenna in your home depends on where you live. Use the map below as a general placement guideline. Area 1 : Place the antenna at an EAST -
facing window. Area 2 : Place the antenna OUTSIDE, away from any overhead obstructions. Area 3 : Place the antenna at a NORTH WEST - or WEST - facing window. Area 4 : Place the antenna at a WEST -
or NORTH - facing window. Area 5 : Place the antenna at a NORTH -
facing window. Area 6 : Place the antenna at a NORTH -
or EAST - facing window. 26 26 Antenna Aiming TERl SAT--++Memory Options In this mode, you can activate or deactivate the Memory Search Function (S-seek). You can also remove all of the 18 memory locations. Menu Options Channel Add/Skip Lock Options Audio Level Antenna Aimging Memory Options The following adjustments can be made:
Auto Memory Search Clear All Auto Memory Search: Press the or button to select either On or Off, then press the button to implement the setting. On: To activate the S-seek function. Off: To deactivate the S-seek function. 27 27 Memory OptionsAuto Memory SearchCategory 12:00P Clear AllAuto Memory SearchOnCategory 12:00P Off Clear All: Press the or button to select either Yes or No. The message Are You Sure? will pop up on the screen. Press the button to confirm the setting. Yes: Will remove all recorded channels. No: Will cancel the deletion. Memory Options Auto Memory Search Clear All Category 12:00P Time Based Features The following adjustments can be made:
Clock Alarm Clock Program Alert Auto Shutdown Sleep Mode 28 28 Menu OptionsLock OptionsAudio LevelAntenna AimgingTime Based FeaturesMemory OptionsTime Based FeaturesClockAlarm ClockProgram AlertAuto ShutdownSleep Mode Clock: This option enables you to set up the time to be displayed on the screen. Time is kept directly by the SIRIUS satellite and is transmitted in GMT FORMAT. Clock Format Time Zone Daylight Saving Time Format: Press the or button to select either the 12 Hour (default) or the 24 Hour mode, then press the button to confirm the setting. Time Zone: Press the or button to select the correct time zone for your region, then press the button to confirm the setting.
(GMT 9:00) Alaska
(GMT 8:00) Pacific
(GMT 7:00) Mountain
(GMT 6:00) Central
(GMT 5:00) Eastern
(GMT 4:00) Atlantic
(GMT 3:00) Newfoundland (default) 29 29 Format12 HourCategory 12:00P 24 HourTime Zone(GMT-7:00) Mountain(GMT-6:00) Central(GMT-5:00) Eastern(GMT-4:00) Atlantic(GMT-3:00) Newfndlan Daylight Savings Time (DST): Activate this option if your area is subject to DST. Press the or button to select DST Observed (default) or DST Not Observed setting. Then press the button to confirm the setting. Daylight Saving Time DST Observed DST Not Observed Category 12:00P Alarm Clock: You can set your plug and play satellite radio to turn on at a selected time. Set Alarm: Press the or button to select either the On or Off(default) setting, then press the button to confirm the setting. Time: The default time is 12:00 pm. Press the or button to adjust the hour. Press the or button to adjust the minute. AM or PM is indicated automatically. Press the button to confirm the setting. 30 30 Set AlarmOnCategory 12:00P Off12:00 PMTime Program Alert: This option allows your XACT Stream Jockey plug and play satellite radio to tune itself to a pre-selected channel at a pre-selected time. Note:To use your programmed setting, make sure to set Program Alert to Program Alert On. The following settings can be made in this sub-menu screen:
Program Time/Day (default-12:00pm-Monday) Channel Selection (default-Currently Playing Channel) Program Alert (default-Off) Set Program Alert Program Time/Day Channel Selection Program Alert Program Time/Day: Press the or button to select either Time or Day. Then press the button to confirm the setting. Time: Press the or button to adjust the hour and the or button to adjust the minutes. Then press the button. AM or PM displays automatically as you advance the time. 31 31 Program Time/DayTimeDay12:00 PMTime Day: Press the or to navigate the day: Monday, Tuesday, Wednesday, Thursday, Friday, Saturday or Sunday. Press the button to confirm the setting. Day Monday Channel Selection: Press the or button to scroll through the channel list and select the channel of your preference. Press the button to confirm the setting. Program Alert: Press the or to select either the On or Off setting. Press the button to confirm the setting. Auto Shutdown: This option will automatically turn your satellite radio off after an hour of inactivity. An audible tone will sound one minute before your device turns off. Press the or to select the Enabled or Disabled setting. Press the button to confirm the setting. 32 32 Channel001 Channel Name002 Channel Name003 Channel Name004 Channel Name005 Channel NameProgram AlertOnCategory 12:00P OffAuto ShutdownEnabledCategory 12:00P Disabled Sleep Mode: When entering this mode, you can program your XACT Stream Jockey satellite radio to shutdown after a pre-selected period of time. Sleep Mode Off 15 Min 30 Min 45 Min 60 Min The following adjustments can be made:
Off (default) 15 min. 30 min. 45 min. 60 min. Press the or button to select the time. Press the button to confirm the setting. Your XACT Stream Jockey satellite radio receiver will now turn off after the selected time has passed. If Off is selected, the Sleep Mode will be canceled. Factory Default The following items can be reset to their default mode. A message will pop up that reads Restore Default Settings? before you can reset the item to its default mode. Press the or button to select either Yes(to reset) or No (to cancel the reset). Press the button to confirm the setting. 33 33 Items revert to their original factory settings as follows:
All Presets revert to empty Display Dimming to 70%
Display Contrast to 50%
FM Modulator to On Audio Output Level to 50%
Access to all skipped streams restored Memory Search On Memory locations will be erased 12-Hour Clock Format Eastern time zone Daylight savings time observed Alarm Off Alarm Time 12:00pm Program Alert Time 12:00pm Program Alert Day Monday Program Alert Channel Number (current ) Auto Shutdown Off Sleep Mode Off Default Font Size/Type 5x7 All preset channels and stored artists/composers and songs will also be removed, and all skipped channels will become un-skipped (locked channels remain locked). 34 34 DISPLAY MESSAGES Acquiring Signal When the audio signal is lost, a pop-up window with the message Acquiring Signal is displayed until the signal is recovered. 001 Channel Name Acquring Signal Category Antenna Not Detected When no antenna is detected and the signal is lost, a pop-up window with the message Antenna Not Detected is displayed until an antenna is detected and the signal is acquired. Updating Channels When a GCI (Global Control Information) update from the Sirius broadcast system is detected, a pop-up window with the message Updating Channels X% Completed is displayed until the GCI update is complete. 35 35 001CategoryChannel NameAntennaNot Detected001Category 12:00PArtistSongAChannel NameUpdating ChannelsX% Completed Subscription Updated When a subscription update (PSV) from the SIRIUS broadcast system is detected, a pop-up window with the message Subscription Updated Anykey to Continue is displayed for at least 3 seconds. 001 Channel Name Artist Song SubscriptionUpdated Anykey to Continue Category 12:00P A Mute A single press of the Mute button will temporarily disable all analog and digital outputs from your device. Use your remote control to implement this operation. Keypad Lock You can temporarily lock the panel or front panel controls of your XACT Stream Jockey satellite radio receiver. Simultaneously press the and volume control buttons to activate the keypad lock function. 36 36 001001 Channel Name001 Channel Name001 Channel Name001 Channel NameCategory 12:00PArtistSongChannel NameA001001 Channel Name001 Channel Name001 Channel Name001 Channel NameCategory 12:00PArtistSongChannel NameA PROBLEM SOLVING Problem Solving Section For your assistance, we have listed a few common problems below. The Satellite Receiver does not work. Please check the Power Cables. Make sure you have contacted Sirius to activate your Satellite Radio subscription 1-888-539-SIRIUS (7474). I have no sound from my Satellite Receiver Check the audio cables and make sure they are plugged in correctly. Check the FM Transmitter Setting and make sure that your FM radio is set to the correct channel. The LCD displays Acquiring Signal When the audio signal is lost, a pop-up window with the message Acquiring Signal is displayed until the signal is recovered. The LCD Displays Antenna not Detected When no antenna is detected and the signal is lost, a pop-up window with the message Antenna Not Detected is displayed until an antenna is detected and the signal is acquired. Reception is weak or the audio has static and is unclear. Check that the satellite antenna is connected and not faulty. Change the location of the Antenna making sure it is away from obstructions, see page 26. 37 37 WARRANTY WWaarrrraannttyy IInnffoorrmmaattiioonn XXAACCTT CCoommmmuunniiccaattiioonn One-Year Limited Warranty This limited warranty sets forth all XACT Communication responsibilities regarding your product. There are no other expressed or implied warranties from XACT Communication. WWaarrrraannttyy SSeerrvviiccee PPrroovviiddeedd If you purchased the product new from a retail vendor, XACT Communication warrants the equipment against defects in material and workmanship for a period of one (1) year from the original date of purchase. This warranty is in lieu of all other express warranties. This warranty begins when you purchase the Telephone Answering System and continues for one (1) year unless you sell or rent the unit, in which case the warranty stops. XACT Communication disclaims any implied warranty, including the warranty of merchantability and the warranty of fitness for a particular purpose, as of the date of one year from your original purchase of the Telephone Answering System XACT Communication assumes no responsibility for any special, incidental, or consequential damages. This warranty gives you specific legal rights and you may have other rights which vary from state to state. Some states do not allow the exclusion or limitations of special, incidental, or consequential damages or limitations on how long a warranty lasts, so the above exclusion or limitation may not apply to you. WWaarrrraannttyy SSeerrvviiccee NNoott PPrroovviiddeedd This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or operation, lack of reasonable care, unauthorized modification, or the affixing of any attachment not provided by XACT Communication with the equipment, and/or loss of parts. This warranty is voided in the event any unauthorized person opens, alters, or repairs the product. All XACT Communication equipment being returned for repair must be suitably packaged. 38 WARRANTY WWhhaatt TToo DDoo ffoorr WWaarrrraannttyy SSeerrvviiccee During the first thirty (30) days, a defective product is eligible for over-the-counter exchange at the retailer from whom it was purchased. After thirty (30) days, the defective product should be returned to the authorized service center. Please allow a minimum of 2-3 weeks for the return of your product. For the shipping address of the authorized service center, call one of the telephone numbers given below. Your product will be repaired or replaced if examination by the service center determines the product is defective. Products received damaged as a result of shipping will require you to file a claim with the carrier prior to repair. A product received with missing parts or with damage due to abuse, inadequate packing or some other noncompliance with this limited warranty will be returned to you C.O.D., freight collect. NOTE: A product received which was not made by XACT Communication or which is not defective as determined by our test procedures will not be repaired and will be returned to you C.O.D., freight collect. TToo OObbttaaiinn WWaarrrraannttyy SSeerrvviiccee
Provide proof of the date of purchase within the package.
Prepay all shipping costs to the authorized service center.
Include a return shipping address within the package. Please retain your sales receipt, the carton, the packing materials, and the printed material. The original carton is the best shipping container for the Product should you have to return it. FFoorr yyoouurr rreeffeerreennccee::
Model Number______________________________ SID Number______________________________ PNP Number_______________________________ Date of Purchase__________________________ Name of Dealer_____________________________ XACTCommunication Customer Service Telephone Number:
1-866-466-XACT (9228) OUTSIDE THE U.S.A. ANDCANADACALL: 1-212-481-7950 Visit Us on the Web: www.getxact.com 39 39 To Activate your Satellite Radio Receiver or for latest news and questions regarding Sirius Satellite Radio service visit www.sirius.com or call 1-888-539-SIRIUS (7474). Call Toll Free 1-866-466-XACT (9228) or Visit our Website:
www.getxact.com
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2004-07-09 | 88.1 ~ 107.9 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2004-07-09
|
||||
1 | Applicant's complete, legal business name |
Wistron NeWeb Corporation
|
||||
1 | FCC Registration Number (FRN) |
0006053789
|
||||
1 | Physical Address |
20 Park Avenue II
|
||||
1 |
Hsinchu, N/A 308
|
|||||
1 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
k******@emcc.de
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
NKR
|
||||
1 | Equipment Product Code |
UPAUS007
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
W****** S****
|
||||
1 | Title |
Senior Director / System Engineering dept.
|
||||
1 | Telephone Number |
886-3******** Extension:
|
||||
1 | Fax Number |
886-3********
|
||||
1 |
w******@wnc.com.tw
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Satellite Radio Receiver | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
ECOM Sertech Corp.
|
||||
1 | Name |
C****** W****
|
||||
1 | Telephone Number |
88635********
|
||||
1 | Fax Number |
88635********
|
||||
1 |
c******@itri.org.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CE | 88.10000000 | 107.90000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC