Verizon Smart Display User Guide Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/ TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Important Notice The user is responsible for determining whether surfaces and installation environments are appropriate. Please remember that many factors influence installation safety. Please follow the user manual. Materials, flatness, cleanliness of surfaces, humidity, wind speed, time and many other factors can affect the adhesiveness and fixedness of this product. Verizon does not guarantee the product can be fixed and will not fall. Given the variety of factors that can affect the adhesion and fixedness, it is essential that the user evaluates the conditions of surfaces and the environment to determine whether they are suitable for installation. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, VERIZON MAKES NO OTHER WARRANTIES, EITHER EXPRESS, IMPLIED OR STATUTORY. VERIZON DISCLAIMS ANY LIABILITY CAUSED BY ANY USERS NON-COMPLIANCE WITH THE USER MANUAL. DISCLAIMER Safety Warnings Adapter in the list below. Do not use any other power adaptor except for the one that accompanies this unit or a power adaptor identified Use of another adapter could result in damage to the unit. The following power adaptor is qualified for use with this Verizon Smart Display:
This unit must be powered by LUCENT TRANS, model 1A100-US1230 ; 12V, 3A, 36W or DELTA ELECTRONICS, model ADP-36DW B2A; 12V, 3A, 36W Chapter 1 Introduction ..................................................................................................................................1 Unboxing Information .......................................................................................................................1 Product Overview..............................................................................................................................2 LED Behavior
.................................................................................................................................2 Chapter 2 Setup and Activation.....................................................................................................................3 Chapter 3 Product Specifications...................................................................................................................4 Chapter 1 Introduction your life easier and more interesting. Unboxing Information
Verizon Smart Display 1
Power adaptor 1 With a large touch screen and the intelligent Amazon's Alexa voice assistance, Verizon Smart Display makes Inside the product package for the Verizon Smart Display, you should find the following items:
1 Product Overview Light sensor LED Camera Microphone Buttons: Volume up, Volume down, Mute Camera shutter Speaker LCM USB port Power port LED Behavior LED Status Solid white Soft blink white Hard blink red Fast blink red Hard blink blue Fast blink blue Meaning Device is booting up; setup complete Activating; firmware is flashed Hardware/system failure; no Internet connectivity Firmware update error; BT pairing has failed BT pairing BT pairing is successful 2 Chapter 2 Setup and Activation 1. Unbox the Verizon Smart Display, and power adaptor. 2. Connect the cables:
2.1 Plug the power adapter connector into the power port on the Verizon Smart Display. 2.2 Plug the power adapter into a wall outlet. 3. Follow the on-screen instructions to complete the startup settings (e.g. entering a PIN code). 3 Chapter 3 Product Specifications 1. LTE Wi-Fi Bluetooth Memory Storage LCM PSU Voice assistant Dimensions 209.52116.5133.48 mm (WDH) Supports Alexa announcements, calling, messaging (ACM) service and BlueJeans video conferencing Operating Temperature 0 C to 40 C Cat. M1, band 4 and band 13 2.4GHz and 5GHz 802.11ac 22 MIMO Bluetooth 5.0 Supports BR/EDR 4 GB RAM 16 GB eMMC 8 1280800 pixels 12V/3A
"Hi Verizon"
Amazon's "Alexa"
4