Users manual IEEE 802.11 b/g/n Wi-Fi Module Version 0.1 Edition #
Reason for revision Issue date Editor Reviewer Approver V0.1 V0.2 Generic Version 2017/07/13 Ben Chang Alex Chang Alex Chang Update CE power table 2017/09/05 Ben Chang Alex Chang Alex Chang Preliminary information (Official release may be changed without notice) This document contains proprietary information which is the property of Wistron NeWeb Corporation and is strictly confidential and shall not be disclosed to others in whole or in part, reproduced, copied, or used as basic for design, manufacturing or sale of apparatus without the written permission of Wistron NeWeb Corporation. 1 1. FCC Statement ....................................................................................................................................... 3 2. Introduction ............................................................................................................................................ 5 2.1 Scope ................................................................................................................................................ 5 2.2 Applicable Documents ..................................................................................................................... 5 2.3 Product Photograph (SGB) .............................................................................................................. 6 3. Key Features .......................................................................................................................................... 6 4. General Specifications ........................................................................................................................... 7 5. Hardware Block Diagram ...................................................................................................................... 7 6. Pin Definition ......................................................................................................................................... 8 7. Electrical Specification 6-1Absolute Maximum Ratings ...................................................................... 8 7-2 Recommended Operating Conditions ............................................................................................. 9 8. Current Consumption........................................................................................................................... 10 9. Interface of Connector ......................................................................................................................... 11 10. Mechanical Dimension(SGB) .............................................................................................................. 12 2 1. FCC Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/CANADA 3 Integration instructions for host product manufacturers Applicable FCC rules to module FCC Part 15.247 Summarize the specific operational use conditions The module is must be installed in mobile device. This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna 3) For all products market in US, OEM has to limit the operation channels in CH1 to CH11 for 2.4G band by supplied firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain change. As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Limited module procedures Not applicable Trace antenna designs Not applicable RF exposure considerations 20 cm separation distance and co-located issue shall be met as mentioned in Summarize the specific operational use conditions. Product manufacturer shall provide below text in end-product manual This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Antennas Brand name Model name Antenna type Antenna gain Antenna connector NA printing ant PIFA 5.18 / 4.59 UFL Label and Compliance Information Product manufacturers need to provide a physical or e-label stating 4 Contains FCC ID: NKR-A3 with finished product Information on Test Modes and Additional Testing Requirements Test tool: QATool V 0.0.0.96 shall be used to set the module to transmit continuously. Additional Testing, Part 15 Subpart B Disclaimer The module is only FCC authorized for the specific rule parts listed on the grant, and that the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. The final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed 2. Introduction 2.1 Scope The document is for design engineers responsible for adding a Mediatek MT7603UN solution to TV to enable wireless function for media devices , and more. Sections of this document include the Wi-Fi , interfaces, microprocessor and memory unit, and specification of Mediatek MT7603UN. TV Notebook Tablet
*Wi-Fi module design-in suggestion 2.2 Applicable Documents Document(or Item) Name MT7603UN datasheet 5 2.3 Product Photograph (SGB) 3. Key Features Wi-Fi Key Feature IEEE 802.11b/g/n compliant Support 20, 40MHz in 2GHz band 2T2R mode with support of 300Mbps PHY rate Support 64QAM in 2.4GHz band Integrated LNA, PA and T/R switch 6 Wake on WLAN via GPIO (client mode) Two printing antenna for 2.4G 4. General Specifications Form Factor Wi-Fi Module PCB Dimension PCBA Height 70.0mm(+/-0.2mm) x 30.0mm(+/-0.2mm) x 1.0mm(+/-0.1mm) 9.1mm(+/-0.3mm) Main Chipset Mediatek MT7603UNN Crystal Frequency 40MHz Host Interface USB 2.0, Common USB for WLAN and BT Transmitter/Receiver 2 TX / 2 RX Data Rates (kbps) Support 802.11b/g/n 40MHz Max. 300 Mpbs Operation Voltage DC 5.0V(Typical) +/-5%
Operation Temperature 0 ~ 50 Storage Temperature
-10 ~ 85 Operation Humidity 5% ~ 95%
Storage Humidity Up to 85%
5. Hardware Block Diagram TBD 7 6. Pin Definition Pin Number 1 2 3 4 5 6 Name Configuration Description NC WOW 5V USB_ DM USB_ DP Ground NC O NC Wake on WLAN Power 5V power supply I/O I/O USB D differential minus USB D differential plus Ground Ground 7. Electrical Specification 6-1Absolute Maximum Ratings Symbol 5V WoW 5V power supply GPIO input voltage T storage Storage temperature H storage Storage humidity Parameter Minimum Typical Maximum Unit 4.75
-0.3
-10 5 5.0 5.25 3.63 85 85 V V C
%RH 8 7-2 Recommended Operating Conditions Symbol 5V 3.3V 5V power supply 3.3V power supply T operating Operating temperature H operating Operating humidity WoW VoH output high voltage V0L output low voltage Parameter Minimum Typical Maximum Unit 4.5 2.97 0 5 2.4
-0.28 5.0 5.5 3.63 50 95 3.63 0.4 V V C
%RH V 9 8. Current Consumption Current Consumption Standard WLAN Tx (Dual Chain) WLAN Rx (Dual Chain) Note:
[1] 5V/(+/-5%) input voltage
[2] The module current variation is +/-15%
[3] Measure at 25C. 11b 11g 11n 11b 11g 11n Average Units Typ./Max. 280/320 mA 265/305 265/305 70/100 70/100 70/100 10 9. Interface of Connector Host Interface Manufacturer: YEONHO Part Number: 12507WS-H06G WNC Part Number : 20.41250.006 11 10. Mechanical Dimension(SGB) 12