FCC ID: 2BFEF-VWL1300 Wireless Charging Pad for Electric Golf Carts

WiTricity Halo Receiver Model Number: VWL1300 The WiTricity Halo PV Receiver shall be professionally installed in accordance with good engineering practices and WiTricity's engineering guidelines. Consult WiTricity's engineering support and integration guidelines to ensure that the integration meets Electromagnetic Compatibility and RF Exposure requirements when used with the WiTricity Halo PV Power Hub. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Compliance Statement This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the provided instructions, may cause unintended harmful interference to radio communications. Due to a wide variety of installation scenarios, there is no guarantee that interference will not occur for a particular installation. It can be reasonably determined if this equipment causes interference by unplugging it and plugging it back in to see if interference continues for radio or television reception when plugged in. If this equipment does cause interference to radio or television reception, the user is encouraged to attempt to correct the interference using one or more of the following options:

Increase the distance between the equipment and the receiving antenna on the radio and/or television. Relocate or change the orientation of the receiving antenna on the radio and/or television. Ensure that the equipment is attached to a different circuit than the one being used for the radio and/or television. Consult a radio expert, dealer, or technician for help resolving interference concerns. Any changes made to this product not authorized by WiTricity might void the Electromagnetic Compatibility (EMC) or increase RF Exposure levels that have been validated. Unauthorized changes could negatively affect your authority to operate this product.

H G F E D C B A 12 11 10 9 8 7 6 5 4 REV. A00 3 DESCRIPTION INITIAL RELEASE 2 REVISIONS DATE 3/18/24 AUTHOR SFUNG 1 ECO

A THIRD ANGLE PROJECTION UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS 12 11 10 9 8 7 6 5 4 THIS DOCUMENT IS THE PROPERTY OF WITRICITY CORP AND IS CONSIDERED CONFIDENTIAL. UNAUTHORIZED DISCLOSURE, REPRODUCTION, OR USE FOR MANUFACTURING BY ANY OTHER ENTITY IS STRICTLY PROHIBITED WITHOUT PRIOR WRITTEN CONSENT INTERPRET AND APPLY PER ANSI/ASME Y14.5-2009 AND Y14.8-2009 TOLERANCES:

X 10 mm: 0.1 mm 10-60 mm: 0.2 mm 60-120 mm: 0.5 mm 120-500 mm: 1.0 mm 500-2000 mm: 2.0 mm ANGULAR: 1 DETAIL A SCALE 2 : 1 DRAWN BY ENGINEER APPROVAL SFUNG SFUNG KSEALY ISSUE DATE PART NO. 3/18/24 DESCRIPTION 207-000263-01 SPECIFICATION, LABEL LOCATION, PRU 57 WATER ST, WATERTOWN, MA 02472 3 2 SCALE 1:1 SHEET A2 REV A00 SHEET NO. 1 OF 1 1 H G F E D C B A

8 7 6 5 40.0 0

. 8 4 4 REV. A00 B00 2 B00 CUT LINES 3 F E D C B NOTES 1. 2 3 4. 5. 6. 7. 8. 9. A MATERIAL: 3M 7872 - THERMAL TRANSFER GLOSS POLYESTER 3M 7733FL - UV RESISTANT POLYESTER OVERLAMINATING FILM ARTWORK IS DEFINED IN LATEST REVISION OF 211-000002-01.AI FILE DATAMATRIX BARCODE TO FOLLOW FORMAT "SN,TLA"

LABEL PEEL STRENGTH, SHEAR STRENGTH, SUN AND FADING RESISTANCE, WEAR RESISTANCE, MOISTURE AND HEAT AGING RESISTANCE, SALT SPRAY RESISTANCE, BACTERIA RESISTANCE AND ALL OTHER PROPERTIES SHOULD MEET GB/T 25978-2018; THE TEST METHOD IS GB/T 13306. HEAT RESISTANCE: 180C, DOES NOT BURN. ALL MATERIALS AND PROCESSES IN THIS DRAWING SHALL BE DECLARED COMPLIANT TO THE EU ROHS DIRECTIVE 2011/65/EU AS AMENDED BY 2015/863/EU & 2017/2102/EU NO OIL, CRACKS, HANDWRITING BREAKPOINTS, BLURRED HANDWRITING, WRINKLES, PROHIBITED SUBSTANCES (LEAD, MERCURY, ARSENIC, CHROMIUM, CADMIUM, FORMALDEHYDE, ASBESTOS, PBBS, PBDES, ETC.). SERIAL NUMBER TO FOLLOW TYPE 6 SERIALIZED FORMAT IN 207-000251-01 PART TRACEABILITY AND MARKING DOCUMENT. LABEL MUST MEET UL 969 REQUIREMENT B00 8 7 6 5 4 3 DESCRIPTION INITIAL RELEASE 2 REVISIONS ADDED FCC ID LINE, LOGO, AND FCC RULES DATE 9/25/23 3/14/2024 AUTHOR MARBORE MARBORE 1 ECO

ECO-400183-00 F E D C B A

(0.020) ADHESIVE

(0.025) DECAL

(0.223) OVERALL

(0.081) LINER

(0.046) ADHESIVE

(0.051) DECAL DETAIL A - LABEL & LAMINATE SCALE 100:1 DRAWN BY ENGINEER APPROVAL MARBORE MARBORE BDAVIES ISSUE DATE 3/14/2024 PART NO. DESCRIPTION 211-000002-01 57 WATER ST, WATERTOWN, MA 02472 2 LABEL, PRODUCT, PRU SCALE 1:1 SHEET A3 REV B00 SHEET NO. 1 OF 1 1 THIRD ANGLE PROJECTION UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS THIS DOCUMENT IS THE PROPERTY OF WITRICITY CORP AND IS CONSIDERED CONFIDENTIAL. UNAUTHORIZED DISCLOSURE, REPRODUCTION, OR USE FOR MANUFACTURING BY ANY OTHER ENTITY IS STRICTLY PROHIBITED WITHOUT PRIOR WRITTEN CONSENT INTERPRET AND APPLY PER ANSI/ASME Y14.5-2009 AND Y14.8-2009 TOLERANCES:

X 10 mm: 0.1 mm 10-60 mm: 0.2 mm 60-120 mm: 0.5 mm 120-500 mm: 1.0 mm 500-2000 mm: 2.0 mm ANGULAR: 1 3

Authority to Act as Agent FCC March 14, 2024 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 SUBJECT: FCC Application for FCC ID: 2BFEF-VWL1300 To Whom It May Concern:

We, the undersigned, hereby authorize Jason Stewart of VPI Technology at 313 W. 12800 S,. Suite 311, Draper UT 84020 to act as our agent and on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by VPI Technology on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, By:

Title: Engineering Fellow On behalf of WiTricity Corporation Ky Sealy

313 West 12800 South, Suite 311, Draper, UT 84020 (801) 260-4040 March 20, 2024 Antenna Data Letter Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 FCC ID: 2BFEF-VWL1300 The antenna used for this device is a meandering PCB trace antenna. All fundamental signal measurements, including EIRP measurements were made using radiated measurement techniques, negating the need for specific antenna gain details. Thank you!

Jason Stewart Director Laboratories VPI Laboratories, Inc. 801-260-4050 PRU_AntennaLetter.docx Page 1 of 1

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-14-2024 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: 2BFEF-VWL1300 WiTricity Corporation (the applicant) certifies that, as of the date of the filing of the application, we designate ourselves as the U.S. agent for service of process. Designated U.S. Agent Information:

FRN: 0021816699 Company Name: WiTricity Corporation Address: 57 Water Street, Watertown, MA 02472 Contact Person: Ky Sealy Tel.: +1 617-926-2700 Email: ky.sealy@witricity.com Sincerely, Ky Sealy WiTricity Corporation

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-14-2024 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BFEF-VWL1300 WiTricity Corporation (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Ky Sealy WiTricity Corporation

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-14-2024 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BFEF-VWL1300 WiTricity Corporation (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity, or any of its subsidiaries or affiliates) as an entity producing covered equipment. Sincerely, Ky Sealy WiTricity Corporation

Request for Confidentiality 2BFEF-VWL1300 March 14, 2024 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject:

FCC ID:

To Whom It May Concern:

Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Block Diagram Operational Description Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Best Regards Ky Sealy WiTricity Corporation