FCC ID: VA8-WSC-IS Temperature Sensor

INSTALLATION GUIDE WSC-IS Temperature Sensor Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON, L4M 0G8 Canada / 103 Miller Drive, Crittenden, Kentucky, USA, 41030 Phone 1 (866) 820-8686 www.napoleon.com hvac@napoleon.com W415-4096 / 06.10.22 Label 1.Label 2.ThermostatIf you have a C wire, you will not need the label 2 below.Control boardCCRCRCRCRCRHRHRRCCSSGGRRRCRCRHRHY2Y2Y/Y1Y/Y1Y/Y1Y/Y1W/W1W/W1W/W1W/W1W2W2O/BO/B**GG! WARNING Failure to follow these safety notices could result in fire, electric shock, other injuries, or damage to the thermostat and other property. Read all the safety notices below before using the thermostat. Avoid high humidity or extreme temperatures. Avoid long exposure to direct sunlight or strong ultraviolet light. Do not drop or expose the unit to intense vibration. Do not disassemble or try to repair the unit on your own. Do not expose the unit or its accessories to flammable liquids, gases, or other explosives. Product Name FCC ID IC ID Model Number Outdoor Temperature Sensor with Probe WSC-OS VA8-WSC-IS 7114A-

WSCIS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) The device may not cause harmful interference; and 2) the device must accept any interference received, including interference that may cause undesired operation. 2 W415-4096 / 06.10.22 Pairing the Thermostat and Outdoor Sensor 1. Click the + button at the top-right corner of the interface in Menu -> Sensors on the thermostat and tap Next. Outdoor Sensor 2. 3. Remove the rear cover of the sensor. Press and hold the button on the back of the sensor until the indicator on the front of the sensor flashes red. 4. Wait for sensors to pair automatically. When the pairing is successful, the sensor flashes green 3 times. 3 W415-4096 / 06.10.22 5. Place the temperature probe of the sensor outdoors while leaving the main body of the sensor indoors. Make sure the sensor is within 10 meters of the thermostat. 4 W415-4096 / 06.10.22 Notes 5 W415-4096 / 06.10.22 FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. IC warning:

This device contains licence-exempt tasmittre(s)/receiver(s)/ that comply with Innovation Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Dclaration de l'ISED Canada :

Cet appareil contient des tasmittre (s) / rcepteur (s) sans licence / conformes l'innovationRSS exemptes de licence de Sciences et Dveloppement conomique Canada. L'opration est sous rserve des deux conditions suivantes :

1) cet appareil ne peut pas causer d'interfrences et 2) ce dispositif doit accepter toute interfrence, y compris peut provoquer le fonctionnement indsirable de l'appareil.

o je

) Poe

. 2) a _ 6 ae os 2... DD -

o-

oC ao Se

N S od Tia Puiu Gt Gz 0 OF 0S 02 OZ 08 06 gp .ot 0Z 0 Ov 0S 09 0Z O OF 0S C9 OZ 08 06 Ob oy 0z oc Ov G3 09 04 08 96 00201 Ne i A cyv DonaeMiena teeter came teatic eeeace Wccalivvtrviat iy ty PEeMEETT TELE EU

Wolf Steel Ltd. Agent Authorization Company: Wolf Steel Ltd. Address: 24 Napoleon Road Barrie, Ontario, L4M 4Y8 Canada Product Name: Temperature Sensor Model Number(s): WSC-IS, WSC-OS Product Description: Temperature Sensor We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Paul Hodges Date: Jun. 16, 2022 Title:

Innovation and Engineering Systems Manager Company: Wolf Steel Ltd.

Wolf Steel Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: VA8-WSC-IS Date: Jun. 16, 2022 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Paul Hodges Title: Innovation and Engineering Systems Manager

Model Difference Declaration To Whom It May Concern, We, Wolf Steel Ltd. (Temperature Sensor) Trademark:N/A; Model Number:WSC-IS, WSC-OS; All models the function, software and electric circuit are the same, only with a product model named different for commercial purpose. Test sample model: WSC-IS. Please contact me if you have any question. Name:Paul Hodges Date: Jun. 16, 2022 Title:Innovation and Engineering Systems Manager Signature of applicant: