Download mobile app iOS 9.0 and later Andriod 4.1 and later www.lightpack.tv Quick Start Guide LED strip Ribbon holder TV back side Connector x1 Lightpack x5 Straight connector x1 LED strip x1HDMI x1 Remote control x20 Ribbon holder x1LED cable x1 Power supply LED cable Lightpack Watch video instruction on lightpack.tv/start 2. 3. Installation 1. Stick the Ribbon to the TV 1. Wipe the dust off the back side of TV. 2. Installation The arrows on the Ribbon must be directed clockwise 3. 1-2 cm 1-2 cm 5 cm 5 cm The clip should not cover the LED TV back side Important:
Start from the lower left orner Stick the holder to the TV TV back side 4. 5. Installation 2. Cut the Ribbon and assemble 1. Cut here only 2. TV back side 2. Remove the silicone case from the ends 1,5 cm red black 1. 6. Check that the Ribbon and the connector are facing up. a). b). c). Installation 7. Installation Installation Installation Installation 3. Connect the Lightpack Installation 1. 2. 3. Lightpack backside TV back side TV back side 1. HDMI 2. Ribbon 3. connector Power supply Connect the power cable last!
8. If your TV has 16:9 or 16:10 aspect ratio, the Lightpack will setup the Ribbon automatically. Otherwise, do it manually. Go to p.4. 9. Installation Usage 4. Connecting the Remote to the Lightpack 5. Manual Ribbon setup Installation Skip this step if your TV aspect ratio is 16:9 or 16:10. 1. Press the button
(in several places). 2. The Remote will start blinking. 1. Press button for 2 sec. Inputs 2. The light spot will start moving. Inputs Inputs 3. Place the Remote close to the Lightpack. 4. When connected, the Remote will blink on and off. 2 sec Led will light solid green TV back side Inputs Inputs The spot moves 10 cm Inputs 10. 11. MediaMoodsMediaMoodsMediaMoodsMediaMoodsMediaMoods Installation Usage Usage Connecting HDMI sources 3. When the spot reaches a corner, push the button. Inputs 4. Repeat the process with all corners. Connect at least one HDMI device. TV back side TV back side The light spot will blink indicating that the Lightpack remembered the corner position. Then the spot will continue moving. Upon nishing, the Lightpack will automatically exit the Manual Setup mode and remember the preferences. 12. HDMI device HDMI device HDMI device HDMI device 13. Usage Turn the Lightpack on 1. Turn on your TV and switch it to the HDMI mode. 2. Turn on the HDMI device connected to the Lightpack. It will turn on automatically. 3. To turn the Lightpack on or off manually, use the button on the Remote or press and hold the button on the Lightpack. OR 2 sec Usage Switch HDMI input Moodlight mode Inputs 1. Press the button on the Remote or press the button on the Lightpack. It will switch between active inputs, regardless of whether the Ribbon is on or off. 1. To turn on the Moodlight mode, press the button on the Remote. Moods 2. To switch between moods, press the button again. Moods Moods Inputs OR 3. To turn off the Moodlight mode, use the button on the Remote or the Lightpack button. Inputs Inputs 14. 15. MediaMoodsMediaMoodsMedia 20C